Cisco90Series-MIB
172 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1570 | NodeciscoTelesend | |||
| 1.3.6.1.4.1.1570.1 | NodefrMux | |||
| 1.3.6.1.4.1.1570.1.1 | NodefrxDownloadTrap | This trap is sent if the Download Config pushbutton on the channel unit faceplate is pushed and frxDefaultTrap is set to 1. | ||
| 1.3.6.1.4.1.1570.1.1 | NodefrxSys | |||
| 1.3.6.1.4.1.1570.1.1.1 | ScalarfrxSysDescr | read-only | mandatory | Description of the Cisco 90 Series System. |
| 1.3.6.1.4.1.1570.1.1.2 | ScalarfrxClockHour | read-write | mandatory | Synchronized 24 hour clock for the Cisco 90 Series system - Hour. This clock is used by the channel units and BRITE cards to set the performance monitoring end… |
| 1.3.6.1.4.1.1570.1.1.3 | ScalarfrxClockMin | read-write | mandatory | Synchronized 24 hour clock for the Cisco 90 Series system - Minutes. This clock is used by the channel units and BRITE cards to set the performance monitoring … |
| 1.3.6.1.4.1.1570.1.1.4 | ScalarfrxClockSec | read-write | mandatory | Synchronized 24 hour clock for the Cisco 90 Series system - Seconds. This clock is used by the channel units and BRITE cards to set the performance monitoring … |
| 1.3.6.1.4.1.1570.1.1.5 | ScalarfrxUpTime | read-only | mandatory | Time since the agent was last initialized in 0.01 second increments. |
| 1.3.6.1.4.1.1570.1.1.6 | ScalarfrxAdminContact | read-write | mandatory | Cisco 90 Series administrative contact name. |
| 1.3.6.1.4.1.1570.1.1.7 | ScalarfrxSysName | read-write | mandatory | Administratively assigned name for this Cisco 90 Series agent. |
| 1.3.6.1.4.1.1570.1.1.8 | ScalarfrxSysLoc | read-write | mandatory | Physical location of the Cisco 90 Series agent. |
| 1.3.6.1.4.1.1570.1.1.9 | ScalarfrxSysVersion | read-only | mandatory | Cisco 90 Series Agent version number. The version number is an INTEGER representation of the actual version number string. The way to translate to a version nu… |
| 1.3.6.1.4.1.1570.1.1.10 | ScalarfrxUPerfTrapEnable | read-write | mandatory | 1=Enable sending the frxUPerfTrap trap to the SNMP manager when a performance monitoring threshold is crossed at an Cisco 90 Series channel unit or a downstrea… |
| 1.3.6.1.4.1.1570.1.1.11 | ScalarfrxAgtLinkErrors | read-only | mandatory | Number of Annex-D signaling link reliability errors between the Cisco 90 Series Agent and the Frame Relay Switch. A signaling reliability error is declared whe… |
| 1.3.6.1.4.1.1570.1.1.12 | ScalarfrxAgtProtErrors | read-only | mandatory | Number of Annex-D signaling protocol errors between the Cisco 90 Series Agent and the Frame Relay Switch. A signaling protocol error is declared whenever the C… |
| 1.3.6.1.4.1.1570.1.1.13 | ScalarfrxAgtChInactive | read-only | mandatory | Number of times the Cisco 90 Series Agent Annex-D signaling channel was declared inactive. |
| 1.3.6.1.4.1.1570.1.1.14 | ScalarfrxAgtChStatus | read-only | mandatory | Current status of the Annex-D signaling channel between the Cisco 90 Series Agent and the Frame Relay Switch. |
| 1.3.6.1.4.1.1570.1.2 | NodefrxDefault | |||
| 1.3.6.1.4.1.1570.1.2 | NodefrxUPerfTrap | This trap is sent if a performance monitoring threshold on a channel unit or a BRITE card is exceeded and the corresponding bit in the frxAlertMask is enabled … | ||
| 1.3.6.1.4.1.1570.1.2.1 | ScalarfrxDefaultEnable | read-write | mandatory | 1=Enable automatic loading of defaults (defined in this group) to the channel unit when the Download Configuration pushbutton on the channel unit faceplate is … |
| 1.3.6.1.4.1.1570.1.2.2 | ScalarfrxDefaultTrap | read-write | mandatory | 1=Enable sending the frxDownloadTrap trap to the SNMP manager when the Download Configuration pushbutton on the channel unit faceplate is pushed. 2=Disable Trap |
| 1.3.6.1.4.1.1570.1.2.3 | ScalarfrxDConfigSrc | read-write | mandatory | System default for frxConfigSrc - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1… |
| 1.3.6.1.4.1.1570.1.2.4 | ScalarfrxDMgtT391 | read-write | mandatory | System Default for frxMgtT391 - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. … |
| 1.3.6.1.4.1.1570.1.2.5 | ScalarfrxDMgtT392 | read-write | mandatory | System Default for frxMgtT392 - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. … |
| 1.3.6.1.4.1.1570.1.2.6 | ScalarfrxDMgtN391 | read-write | mandatory | System Default for frxMgtN391 - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. … |
| 1.3.6.1.4.1.1570.1.2.7 | ScalarfrxDMgtN392 | read-write | mandatory | System Default for frxMgtN392 - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. … |
| 1.3.6.1.4.1.1570.1.2.8 | ScalarfrxDMgtN393 | read-write | mandatory | System Default for frxMgtN393 - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. … |
| 1.3.6.1.4.1.1570.1.2.9 | ScalarfrxDPortSpeed | read-write | mandatory | System Default for frxPortSpeed - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1… |
| 1.3.6.1.4.1.1570.1.2.10 | ScalarfrxDPortProtocol | read-write | mandatory | System Default for frxPortProtocol - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set t… |
| 1.3.6.1.4.1.1570.1.2.11 | ScalarfrxDCktCIR | read-write | mandatory | System Default for frxCktCIR - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. T… |
| 1.3.6.1.4.1.1570.1.2.12 | ScalarfrxDCktBc | read-write | mandatory | System Default for frxCktBc - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. Th… |
| 1.3.6.1.4.1.1570.1.2.13 | ScalarfrxDCktBe | read-write | mandatory | System Default for frxCktBe - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. Th… |
| 1.3.6.1.4.1.1570.1.3 | NodefrxBank | |||
| 1.3.6.1.4.1.1570.1.3 | NodefrxInsertChUTrap | This trap is sent when the channel unit is inserted. | ||
| 1.3.6.1.4.1.1570.1.3.1 | TablefrxBankTable | not-accessible | mandatory | This Cisco 90 Series Bank Di-group Table contains channel bank level information for each of the channel bank di-groups in the system. A di-group is a T1 inter… |
| 1.3.6.1.4.1.1570.1.3.1.1 | RowfrxBankEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Bank Di-group Table. There is one entry for each channel bank di-group (T1) in the system. There are no entries for unu… |
| 1.3.6.1.4.1.1570.1.3.1.1.1 | ColumnfrxBankIndex | read-only | mandatory | Channel Bank Di-group Number. This index is used to address the various channel banks in the system. This number is the same as the DLCI number used to communi… |
| 1.3.6.1.4.1.1570.1.3.1.1.2 | ColumnfrxBankType | read-write | mandatory | This is the type of channel bank and is for future use. D4 banks return a value of 1. |
| 1.3.6.1.4.1.1570.1.4 | NodefrxChUnit | |||
| 1.3.6.1.4.1.1570.1.4 | NodefrxRemoveChUTrap | This trap is sent when the channel unit is removed. | ||
| 1.3.6.1.4.1.1570.1.4.1 | TablefrxChUTable | not-accessible | mandatory | This Cisco 90 Series Channel Unit Table contains channel unit level control and statistics for each of the Cisco 90 Series channel units in the system. The tab… |
| 1.3.6.1.4.1.1570.1.4.1.1 | RowfrxChUEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Channel Unit Table. There is one entry for each Cisco 90 Series channel unit in the system. There are no entries for un… |
| 1.3.6.1.4.1.1570.1.4.1.1.1 | ColumnfrxChUIndex | read-only | mandatory | Channel Unit Number. This index is used to address a specific channel unit in a bank. For D4 channel banks this number is the same as the physical slot number … |
| 1.3.6.1.4.1.1570.1.4.1.1.2 | ColumnfrxChUType | read-only | mandatory | Type of Cisco 90 Series channel unit installed. |
| 1.3.6.1.4.1.1570.1.4.1.1.3 | ColumnfrxChUVersion | read-only | mandatory | Cisco 90 Series channel unit version number. |
| 1.3.6.1.4.1.1570.1.4.1.1.4 | ColumnfrxSigProtocol | read-only | mandatory | This is the type of Local In-channel Signaling used when the subscriber is running frame relay protocol. It is provided for future use. Set to 1 for T1.617 Ann… |
| 1.3.6.1.4.1.1570.1.4.1.1.5 | ColumnfrxConfigSrc | read-write | mandatory | Source for configuring speed and protocol for each port. 1=Data rate and protocol set by DLCI assignment rules as reported by Annex-D. This option allows contr… |
| 1.3.6.1.4.1.1570.1.4.1.1.6 | ColumnfrxDLCIAdLen | read-only | mandatory | The number of bytes used for the DLCI address. For future use. 1=two octets. |
| 1.3.6.1.4.1.1570.1.4.1.1.7 | ColumnfrxNetInOctets | read-only | mandatory | Total number of octets received by this channel unit from Frame Relay Switch (on the T1 interface) Only frames whose DLCI is addressed to a port on this channe… |
| 1.3.6.1.4.1.1570.1.4.1.1.8 | ColumnfrxNetOutOctets | read-only | mandatory | Total number of octets transmitted to the Frame Relay Switch (on the T1 interface) by this channel unit. Annex-D and SNMP frames are not counted. CRC bytes are… |
| 1.3.6.1.4.1.1570.1.4.1.1.9 | ColumnfrxNetBadFrames | read-only | mandatory | Total number of frames received on the network (T1) interface that are discarded by this channel unit. Possible reasons for discard are: Frame contained HDLC a… |
| 1.3.6.1.4.1.1570.1.4.1.1.10 | ColumnfrxNetHDLCEs | read-only | mandatory | Network Errored Seconds caused by HDLC aborts (7 or more ones in a row). Total number of seconds in which a frame with an HDLC abort is received by this channe… |
| 1.3.6.1.4.1.1570.1.4.1.1.11 | ColumnfrxNetCRCEs | read-only | mandatory | Network Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received by this channel unit on the network (T1) in… |
| 1.3.6.1.4.1.1570.1.4.1.1.12 | ColumnfrxNetLinkEs | read-only | mandatory | Network Errored Seconds caused by Non-integral Bytes. Total number of seconds in which a frame with a non-integral number of bytes is received by this channel … |
| 1.3.6.1.4.1.1570.1.4.1.1.13 | ColumnfrxNetFrShEs | read-only | mandatory | Network Errored Seconds caused by Short Frames received. Total number of seconds in which a frame that is too short (less than 5 bytes) is received by this cha… |
| 1.3.6.1.4.1.1570.1.4.1.1.14 | ColumnfrxNetFrLgEs | read-only | mandatory | Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this ch… |
| 1.3.6.1.4.1.1570.1.4.1.1.15 | ColumnfrxNetPPPEs | read-only | mandatory | Errored seconds caused by bad RFC-1973 (PPP) header. Total number of seconds in which a frame with an invalid RFC-1973 (PPP) header is received by this channel… |
| 1.3.6.1.4.1.1570.1.4.1.1.16 | ColumnfrxNetBufEs | read-only | mandatory | Errored Seconds caused by Buffer Overflow. Total number of seconds in which a frame received by this channel unit on the network (T1) interface was discarded d… |
| 1.3.6.1.4.1.1570.1.5 | NodefrxDConfigFailed | This trap is sent if downloading configuration data to a channel unit fails. | ||
| 1.3.6.1.4.1.1570.1.5 | NodefrxMgt | |||
| 1.3.6.1.4.1.1570.1.5.1 | TablefrxMgtTable | not-accessible | mandatory | This table monitors and controls the T1-617 Annex-D parameters used by the channel units. There is one table row for every channel unit in every bank. The tabl… |
| 1.3.6.1.4.1.1570.1.5.1.1 | RowfrxMgtEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Management Table. There is one entry for each Cisco 90 Series channel unit in the system. There are no entries for unus… |
| 1.3.6.1.4.1.1570.1.5.1.1.1 | ColumnfrxPortsInSvc | read-only | mandatory | Ports in service. The number of ports on a Cisco 90 Series channel unit that have one or more active PVCs, as determined by Annex-D. |
| 1.3.6.1.4.1.1570.1.5.1.1.2 | ColumnfrxMgtT391 | read-write | mandatory | This controls how often (in seconds) the channel unit sends an Annex-D poll to the frame relay switch. This is the Annex-D T391 parameter (Typical value 10) |
| 1.3.6.1.4.1.1570.1.5.1.1.3 | ColumnfrxMgtT392 | read-write | mandatory | This controls how long (in seconds) the channel unit will wait for a subscriber to send it an Annex-D poll before declaring a link error from the subscriber. T… |
| 1.3.6.1.4.1.1570.1.5.1.1.4 | ColumnfrxMgtN391 | read-write | mandatory | This controls how often (in polls) the channel unit sends a full status inquiry poll to the frame relay switch instead of a link integrity verification poll. T… |
| 1.3.6.1.4.1.1570.1.5.1.1.5 | ColumnfrxMgtN392 | read-write | mandatory | When more than frxMgtN392 errors are detected in any frxMgtN393 monitored Annex-D events, the network is declared inactive. This is the Annex-D N392 parameter … |
| 1.3.6.1.4.1.1570.1.5.1.1.6 | ColumnfrxMgtN393 | read-write | mandatory | When more than frxMgtN392 errors are detected in any frxMgtN393 monitored Annex-D events, the network is declared inactive. This is the Annex-D N393 parameter … |
| 1.3.6.1.4.1.1570.1.5.1.1.7 | ColumnfrxNetLinkErrors | read-only | mandatory | Number of signaling link reliability errors from network. A signaling reliability error is declared whenever the channel units did not receive a reply from the… |
| 1.3.6.1.4.1.1570.1.5.1.1.8 | ColumnfrxNetProtErrors | read-only | mandatory | Number of signaling protocol errors from network. A signaling protocol error is declared whenever the channel units receive a reply with incorrect format or se… |
| 1.3.6.1.4.1.1570.1.5.1.1.9 | ColumnfrxNetChInactive | read-only | mandatory | Number of times network Annex-D signaling channel was declared inactive. |
| 1.3.6.1.4.1.1570.1.5.1.1.10 | ColumnfrxNetChStatus | read-only | mandatory | Current status of the Annex-D signaling channel on the network side of the channel bank. |
| 1.3.6.1.4.1.1570.1.5.2 | TablefrxMgtPortTable | not-accessible | mandatory | This table monitors the T1-617 Annex-D link between the channel units and the subscribers. There is one table row for every port on every channel unit in every… |
| 1.3.6.1.4.1.1570.1.5.2.1 | RowfrxMgtPortEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Management Port Table. There is one entry for each port on each Cisco 90 Series channel unit in the system. There are n… |
| 1.3.6.1.4.1.1570.1.5.2.1.1 | ColumnfrxPortIndex | read-only | mandatory | Which subscriber port on the channel unit is addressed. Ports are numbered from 0 to 3. Some channel unit types have less than 4 ports. |
| 1.3.6.1.4.1.1570.1.5.2.1.2 | ColumnfrxPortLinkErrors | read-only | mandatory | Number of signaling link reliability errors from subscriber port. A signaling reliability error is declared whenever the channel units did not receive an Annex… |
| 1.3.6.1.4.1.1570.1.5.2.1.3 | ColumnfrxPortProtErrors | read-only | mandatory | Number of signaling protocol errors from subscriber port. A signaling protocol error is declared whenever the channel units receive an Annex-D link integrity p… |
| 1.3.6.1.4.1.1570.1.5.2.1.4 | ColumnfrxPortChInactive | read-only | mandatory | Number of times the subscriber port Annex-D signaling channel was declared inactive |
| 1.3.6.1.4.1.1570.1.6 | NodefrxPort | |||
| 1.3.6.1.4.1.1570.1.6.1 | TablefrxPortTable | not-accessible | mandatory | This Cisco 90 Series Port Table contains per-port control and statistics for each of the subscriber ports in the system. The table is indexed first using the C… |
| 1.3.6.1.4.1.1570.1.6.1.1 | RowfrxPortEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Port Table. There is one entry for each port on each Cisco 90 Series channel unit in the system. There are no entries f… |
| 1.3.6.1.4.1.1570.1.6.1.1.1 | ColumnfrxPortSpeed | read-write | mandatory | This is the speed that the channel unit port runs at. 1=56kbps 2=64kbps 3=128kbps 4=144kbps This parameter can only be changed if frxConfigSrc is set to SNMP. |
| 1.3.6.1.4.1.1570.1.6.1.1.2 | ColumnfrxPortProtocol | read-write | mandatory | This parameter controls what protocol the channel unit should expect the subscriber to send on the port. 1=Port uses Frame Relay protocol - no encapsulation 2=… |
| 1.3.6.1.4.1.1570.1.6.1.1.3 | ColumnfrxDSLStatus | read-only | mandatory | This is the status of the DSL loop to the subscriber. 1=Loop is down. 2=Frx card has achieved physical layer activation with the first BRITE card or the NT1 if… |
| 1.3.6.1.4.1.1570.1.6.1.1.4 | ColumnfrxPVCAssigned | read-only | mandatory | Number of PVCs assigned to Subscriber Port as determined by Annex-D |
| 1.3.6.1.4.1.1570.1.6.1.1.5 | ColumnfrxLastChange | read-only | mandatory | Time since DSL went in sync or lost sync in 0.01 second increments. |
| 1.3.6.1.4.1.1570.1.6.1.1.6 | ColumnfrxBrite | read-only | mandatory | Number of BRITE cards downstream. BRITE cards are used to extend the loop over subscriber loop carrier systems and are detected via a background polling operat… |
| 1.3.6.1.4.1.1570.1.6.1.1.7 | ColumnfrxDSLInOctets | read-only | mandatory | Number of octets received from the subscriber DSL Does not include Annex-D octets |
| 1.3.6.1.4.1.1570.1.6.1.1.8 | ColumnfrxDSLOutOctets | read-only | mandatory | Number of octets transmitted to the subscriber DSL. Does not include Annex-D octets |
| 1.3.6.1.4.1.1570.1.6.1.1.9 | ColumnfrxT1InOctets | read-only | mandatory | Number of octets received from the network directed at this subscriber port |
| 1.3.6.1.4.1.1570.1.6.1.1.10 | ColumnfrxT1OutOctets | read-only | mandatory | Number of octets transmitted to the network from this subscriber port |
| 1.3.6.1.4.1.1570.1.6.1.1.11 | ColumnfrxDSLBadFrames | read-only | mandatory | Total number of frames received from this subscriber port that were discarded. Possible reasons for discard are: Frame contained HDLC abort (7 or more ones in … |
| 1.3.6.1.4.1.1570.1.6.1.1.12 | ColumnfrxDSLHDLCEs | read-only | mandatory | Subscriber port Errored Seconds caused by HDLC aborts (7 or more ones in a row). Total number of seconds in which a frame with an HDLC abort is received from t… |
| 1.3.6.1.4.1.1570.1.6.1.1.13 | ColumnfrxDSLCRCEs | read-only | mandatory | Subscriber port Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received from this port. |
| 1.3.6.1.4.1.1570.1.6.1.1.14 | ColumnfrxDSLLinkEs | read-only | mandatory | Subscriber port Errored Seconds caused by Non-integral Bytes. Total number of seconds in which a frame with a non-integral number of bytes is received from thi… |
| 1.3.6.1.4.1.1570.1.6.1.1.15 | ColumnfrxDSLFrShEs | read-only | mandatory | Subscriber port Errored Seconds caused by Short Frames. received Total number of seconds in which a frame that is too short (less than 5 bytes) is received fro… |
| 1.3.6.1.4.1.1570.1.6.1.1.16 | ColumnfrxDSLFrLgEs | read-only | mandatory | Subscriber port Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received fr… |
| 1.3.6.1.4.1.1570.1.6.1.1.17 | ColumnfrxDSLDLCIEs | read-only | mandatory | Subscriber port Errored Seconds caused by illegal DLCI. Total number of seconds in which a frame that has a DLCI other than 16 to 23 (or 0) is received from th… |
| 1.3.6.1.4.1.1570.1.6.1.1.18 | ColumnfrxTxBuf | read-only | mandatory | Number of octets in the transmit buffer for this subscriber port. This data is waiting to be sent to the network (T1). |
| 1.3.6.1.4.1.1570.1.6.1.1.19 | ColumnfrxRxBuf | read-only | mandatory | Number of octets in the receive buffer for this subscriber port. This data is from the network (T1) and is waiting to be sent to the subscriber port. |
| 1.3.6.1.4.1.1570.1.6.1.1.20 | ColumnfrxPortNetEs | read-only | mandatory | Total number of seconds in which a frame received from the network (T1) and targeted at this subscriber port was discarded. |
| 1.3.6.1.4.1.1570.1.6.2 | TablefrxCircuitTable | not-accessible | mandatory | This Cisco 90 Series Circuit Table contains per-virtual-circuit control and statistics for each of the permanent virtual circuits in the system. The table is i… |
| 1.3.6.1.4.1.1570.1.6.2.1 | RowfrxCircuitEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Circuit Table. There is one entry for each permanent virtual circuit in the system. There are no entries for unused ban… |
| 1.3.6.1.4.1.1570.1.6.2.1.1 | ColumnfrxPvcIndex | read-only | mandatory | This index is the subscriber loop DLCI number of the permanent virtual circuit. It ranges from 16 to 23. The corresponding network side DLCI must be assigned i… |
| 1.3.6.1.4.1.1570.1.6.2.1.2 | ColumnfrxCktCIR | read-write | mandatory | This is the committed information rate (CIR) in bits per second for the addressed permanent virtual circuit. (Typical value 1536000/#ports). |
| 1.3.6.1.4.1.1570.1.6.2.1.3 | ColumnfrxCktBc | read-write | mandatory | This is the Committed Burst Size (Bc) in bits for the addressed permanent virtual circuit. The time interval over which the burst is measured is Bc/CIR. (Typic… |
| 1.3.6.1.4.1.1570.1.6.2.1.4 | ColumnfrxCktBe | read-write | mandatory | This is the Excess Burst Size (Be) in bits for the addressed permanent virtual circuit. The time interval over which the excess burst is measured is Be/CIR. (T… |
| 1.3.6.1.4.1.1570.1.6.2.1.5 | ColumnfrxFarEndOpStat | read-only | mandatory | This is the status of the far end of the frame relay permanent virtual circuit (through the frame relay network) as determined by Annex-D. 1=active 2=inactive |
| 1.3.6.1.4.1.1570.1.6.2.1.6 | ColumnfrxCktInOctets | read-only | mandatory | The number of input octets from the subscriber port on the addressed permanent virtual circuit. These octets are destined for the network (T1). |
| 1.3.6.1.4.1.1570.1.6.2.1.7 | ColumnfrxCktOutOctets | read-only | mandatory | The number of output octets to the subscriber port on the addressed permanent virtual circuit. These octets were received from the network (T1). |
| 1.3.6.1.4.1.1570.1.6.2.1.8 | ColumnfrxCktInFrames | read-only | mandatory | The number of input frames from the subscriber port on the addressed permanent virtual circuit. These frames are destined for the network (T1). |
| 1.3.6.1.4.1.1570.1.6.2.1.9 | ColumnfrxCktOutFrames | read-only | mandatory | The number of output frames to the subscriber port on the addressed permanent virtual circuit. These frames were received from the network (T1). |
| 1.3.6.1.4.1.1570.1.6.2.1.10 | ColumnfrxCktDiscards | read-only | mandatory | The number of input frames from the subscriber port on the addressed permanent virtual circuit that were discarded due to congestion (lack of buffer space or c… |
| 1.3.6.1.4.1.1570.1.6.3 | TablefrxUEocTable | not-accessible | mandatory | This Cisco 90 Series Embedded Operations Channel Table is used to diagnose and sectionalize problems with the subscriber loop. It contains one entry for each o… |
| 1.3.6.1.4.1.1570.1.6.3.1 | RowfrxUEocEntry | not-accessible | mandatory | A specific entry in the Cisco 90 Series Embedded Operations Channel Table. There is one entry for each Cisco 90 Series channel unit in the system. There are no… |
| 1.3.6.1.4.1.1570.1.6.3.1.1 | ColumnfrxTestPort | read-write | mandatory | This parameter indicates which subscriber port on the channel unit to test. It has no effect until frxStartTest is set to start the test. Only one port on a gi… |
| 1.3.6.1.4.1.1570.1.6.3.1.2 | ColumnfrxTestType | read-write | mandatory | This parameter indicates the type of test to perform. It has no effect until frxStartTest is set to start the test. 1=Set up a loopback and run a PN-2047 Bit E… |
| 1.3.6.1.4.1.1570.1.6.3.1.3 | ColumnfrxLoopLoc | read-write | mandatory | This parameter indicates the location of the loopback or the card that will send corrupt CRC. It has no effect until frxStartTest is set to start the test. It … |
| 1.3.6.1.4.1.1570.1.6.3.1.4 | ColumnfrxLoopCh | read-write | mandatory | This parameter indicates which channels to use for the loopbackOnly and localLoopAllPorts test. It has no effect until frxStartTest is set to start the test. N… |
| 1.3.6.1.4.1.1570.1.6.3.1.5 | ColumnfrxStartTest | read-write | mandatory | This parameter is used to start and stop the test. frxTestPort, frxTestType, frxLoopLoc, and frxLoopCh should be set up prior to starting the test. 1=stop test… |
| 1.3.6.1.4.1.1570.1.6.3.1.6 | ColumnfrxBertRst | read-write | mandatory | This parameter may be used during a LoopbackAndBert test or a BertOnly test to reset the frxBertBE counter. It must be returned to the normal posiion to allow … |
| 1.3.6.1.4.1.1570.1.6.3.1.7 | ColumnfrxBertBE | read-only | mandatory | BERT test block errors |
| 1.3.6.1.4.1.1570.1.6.3.1.8 | ColumnfrxBertTestTime | read-only | mandatory | BERT test time in 0.01 second increments |
| 1.3.6.1.4.1.1570.1.6.3.1.9 | ColumnfrxTestInProg | read-only | mandatory | Test in progress (1); Normal operation (2) |
| 1.3.6.1.4.1.1570.1.6.4 | TablefrxUThrTable | not-accessible | mandatory | This table contains the U-interface Performance Monitoring Thresholds and Alarms for each of the subscriber loops in the system and for any BRITE cards extendi… |
| 1.3.6.1.4.1.1570.1.6.4.1 | RowfrxUThrEntry | not-accessible | mandatory | A specific entry in the U-interface Performance Monitoring Threshold table. There is one entry for each port on each Cisco 90 Series channel unit in the system… |
| 1.3.6.1.4.1.1570.1.6.4.1.1 | ColumnfrxPAddrIndex | read-only | mandatory | This is the physical location where the performance monitoring takes place. It may be set to localFrx(7) to access and control PM values local to the Cisco 90 … |
| 1.3.6.1.4.1.1570.1.6.4.1.2 | ColumnfrxChEsTh | read-write | mandatory | Current Hour Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this threshol… |
| 1.3.6.1.4.1.1570.1.6.4.1.3 | ColumnfrxCdEsTh | read-write | mandatory | Current Day Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this threshold… |
| 1.3.6.1.4.1.1570.1.6.4.1.4 | ColumnfrxChSesTh | read-write | mandatory | Current Hour Severely Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this… |
| 1.3.6.1.4.1.1570.1.6.4.1.5 | ColumnfrxCdSesTh | read-write | mandatory | Current Day Severely Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this … |
| 1.3.6.1.4.1.1570.1.6.4.1.6 | ColumnfrxAlertMask | read-write | mandatory | 8-bit Alert Mask register. One bit for each threshold in both directions. When set to 1, the corresponding threshold crossing is ignored. When set to 0, the co… |
| 1.3.6.1.4.1.1570.1.6.4.1.7 | ColumnfrxThCond | read-write | mandatory | 8-bit Threshold Condition register. One bit for each threshold in both directions. Set to 1 if the threshold is exceeded and the corresponding bit in the frxAl… |
| 1.3.6.1.4.1.1570.1.6.5 | TablefrxUPerfTable | not-accessible | mandatory | This table contains the U-interface Performance Monitoring Statistics for each of the subscriber loops in the system and for any BRITE cards extending those lo… |
| 1.3.6.1.4.1.1570.1.6.5.1 | RowfrxUPerfEntry | not-accessible | mandatory | A specific entry in the U-interface Performance Monitoring Statistics table. There is one entry for each port on each Cisco 90 Series channel unit in the syste… |
| 1.3.6.1.4.1.1570.1.6.5.1.1 | ColumnfrxResetPM | read-write | mandatory | Reset all of the performance monitoring statistics on the specified Cisco 90 Series channel unit or BRITE card. 1=Normal. 2=Reset. There is no need to set this… |
| 1.3.6.1.4.1.1570.1.6.5.1.2 | ColumnfrxPMtype | read-only | mandatory | Determines if the Cisco 90 Series channel unit or the downstream BRITE cards is doing segmented or path performance monitoring as specified in Bellcore documen… |
| 1.3.6.1.4.1.1570.1.6.5.1.3 | ColumnfrxChEsTx | read-only | mandatory | Current Hour Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more blo… |
| 1.3.6.1.4.1.1570.1.6.5.1.4 | ColumnfrxChEsRx | read-only | mandatory | Current Hour Errored Seconds - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block… |
| 1.3.6.1.4.1.1570.1.6.5.1.5 | ColumnfrxPhEsTx | read-only | mandatory | Previous Hour Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bl… |
| 1.3.6.1.4.1.1570.1.6.5.1.6 | ColumnfrxPhEsRx | read-only | mandatory | Previous Hour Errored Seconds - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.7 | ColumnfrxH2EsTx | read-only | mandatory | Errored Seconds 2 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.8 | ColumnfrxH2EsRx | read-only | mandatory | Errored Seconds 2 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.9 | ColumnfrxH3EsTx | read-only | mandatory | Errored Seconds 3 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.10 | ColumnfrxH3EsRx | read-only | mandatory | Errored Seconds 3 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.11 | ColumnfrxH4EsTx | read-only | mandatory | Errored Seconds 4 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.12 | ColumnfrxH4EsRx | read-only | mandatory | Errored Seconds 4 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.13 | ColumnfrxH5EsTx | read-only | mandatory | Errored Seconds 5 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.14 | ColumnfrxH5EsRx | read-only | mandatory | Errored Seconds 5 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.15 | ColumnfrxH6EsTx | read-only | mandatory | Errored Seconds 6 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.16 | ColumnfrxH6EsRx | read-only | mandatory | Errored Seconds 6 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.17 | ColumnfrxH7EsTx | read-only | mandatory | Errored Seconds 7 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.18 | ColumnfrxH7EsRx | read-only | mandatory | Errored Seconds 7 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.19 | ColumnfrxH8EsTx | read-only | mandatory | Errored Seconds 8 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.20 | ColumnfrxH8EsRx | read-only | mandatory | Errored Seconds 8 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.21 | ColumnfrxCdEsTx | read-only | mandatory | Current Day Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more bloc… |
| 1.3.6.1.4.1.1570.1.6.5.1.22 | ColumnfrxCdEsRx | read-only | mandatory | Current Day Errored Seconds - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block … |
| 1.3.6.1.4.1.1570.1.6.5.1.23 | ColumnfrxPdEsTx | read-only | mandatory | Previous Day Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more blo… |
| 1.3.6.1.4.1.1570.1.6.5.1.24 | ColumnfrxPdEsRx | read-only | mandatory | Previous Day Errored Seconds - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block… |
| 1.3.6.1.4.1.1570.1.6.5.1.25 | ColumnfrxChSesTx | read-only | mandatory | Current Hour Severely Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Severely Errored Seconds are seconds in whi… |
| 1.3.6.1.4.1.1570.1.6.5.1.26 | ColumnfrxChSesRx | read-only | mandatory | Current Hour Severely Errored Seconds - Receive direction. Receive is data from the customer towards the network. Severely Errored Seconds are seconds in which… |
| 1.3.6.1.4.1.1570.1.6.5.1.27 | ColumnfrxPhSesTx | read-only | mandatory | Previous Hour Severely Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Severely Errored Seconds are seconds in wh… |
| 1.3.6.1.4.1.1570.1.6.5.1.28 | ColumnfrxPhSesRx | read-only | mandatory | Previous Hour Severely Errored Seconds - Receive direction. Receive is data from the customer towards the network. Severely Errored Seconds are seconds in whic… |
| 1.3.6.1.4.1.1570.1.6.5.1.29 | ColumnfrxCdSesTx | read-only | mandatory | Current Day Severely Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Severely Errored Seconds are seconds in whic… |
| 1.3.6.1.4.1.1570.1.6.5.1.30 | ColumnfrxCdSesRx | read-only | mandatory | Current Day Severely Errored Seconds - Receive direction. Receive is data from the customer towards the network. Severely Errored Seconds are seconds in which … |
| 1.3.6.1.4.1.1570.1.6.5.1.31 | ColumnfrxPdSesTx | read-only | mandatory | Previous Day Severely Errored Seconds - Transmit direction. Transmit is data from the network towards the customer. Severely Errored Seconds are seconds in whi… |
| 1.3.6.1.4.1.1570.1.6.5.1.32 | ColumnfrxPdSesRx | read-only | mandatory | Previous Day Severely Errored Seconds - Receive direction. Receive is data from the customer towards the network. Severely Errored Seconds are seconds in which… |
| 1.3.6.1.4.1.1570.1.6.5.1.33 | ColumnfrxChBeTx | read-only | mandatory | Current Hour Block Errors - Transmit direction. Transmit is data from the network towards the customer. Block errors are 12 millisecond time periods in which a… |
| 1.3.6.1.4.1.1570.1.6.5.1.34 | ColumnfrxChBeRx | read-only | mandatory | Current Hour Block Errors - Receive direction. Receive is data from the customer towards the network. Block errors are 12 millisecond time periods in which a p… |
| 1.3.6.1.4.1.1570.1.6.5.1.35 | ColumnfrxPhBeTx | read-only | mandatory | Previous Hour Block Errors - Transmit direction. Transmit is data from the network towards the customer. Block errors are 12 millisecond time periods in which … |
| 1.3.6.1.4.1.1570.1.6.5.1.36 | ColumnfrxPhBeRx | read-only | mandatory | Previous Hour Block Errors - Receive direction. Receive is data from the customer towards the network. Block errors are 12 millisecond time periods in which a … |