Com-Server-Intern-MIB
176 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5040 | Nodewut | |||
| 1.3.6.1.4.1.5040.1 | NodewtComServer | |||
| 1.3.6.1.4.1.5040.1.1 | NodewtComServerIntern | |||
| 1.3.6.1.4.1.5040.1.1.1 | NodewtConfiguration | |||
| 1.3.6.1.4.1.5040.1.1.1.1 | NodewtSystem | |||
| 1.3.6.1.4.1.5040.1.1.1.1.1 | ScalarwtCableType | read-only | mandatory | Displays the Ethernet connection type used on the Com-Server. |
| 1.3.6.1.4.1.5040.1.1.1.1.2 | ScalarwtMacAddress | read-only | mandatory | Displays the Ethernet address of the Com-Server. |
| 1.3.6.1.4.1.5040.1.1.1.1.3 | ScalarwtSwDate | read-only | mandatory | Displays the creation date 'month/year' of the firmware. |
| 1.3.6.1.4.1.5040.1.1.1.1.4 | ScalarwtSwRev | read-only | mandatory | Displays the revision number of the firmware. |
| 1.3.6.1.4.1.5040.1.1.1.1.5 | ScalarwtDevType | read-only | mandatory | Displays the Com-Server model. |
| 1.3.6.1.4.1.5040.1.1.1.1.6 | ScalarwtMibRev | read-only | mandatory | Displays the revision number of the Wiesemann & Theis MIB. |
| 1.3.6.1.4.1.5040.1.1.1.1.7 | ScalarwtRunTime | read-only | mandatory | Displays the time since the last restart of the Com-Server in 1/100 seconds. |
| 1.3.6.1.4.1.5040.1.1.1.1.8 | ScalarwtPhysPorts | read-only | mandatory | Displays the total number of ports available in the Com-Server (RS232 port, digital I/O port, ...). |
| 1.3.6.1.4.1.5040.1.1.1.1.16 | ScalarwtConfigMode | read-write | mandatory | Defining this entry allows changing (wtConfigModeOn) and saving (stSaveConfig) of all other entries in the Management Information Base of the Com-Server. If th… |
| 1.3.6.1.4.1.5040.1.1.1.1.17 | ScalarwtPassword | read-write | mandatory | 8-character Com-Server password for unrestricted access to the Com-Server configuration menu (Telnet port 1111). Only digits '0' to '9' and letters 'a' to 'f' … |
| 1.3.6.1.4.1.5040.1.1.1.1.18 | ScalarwtSysPswd | read-write | mandatory | The system password, which may consist of maximum 32 characters and is terminated by a zero, is of a higher order than the Telnet password and protects all the… |
| 1.3.6.1.4.1.5040.1.1.1.1.19 | ScalarwtSysName | read-write | mandatory | The system name, which may consist of maximum 32 characters and is terminated by a zero, is used for identifying the Com-Server and is displayed as an opening … |
| 1.3.6.1.4.1.5040.1.1.1.2 | NodewtNetSetup | |||
| 1.3.6.1.4.1.5040.1.1.1.2.1 | ScalarwtIpAddress | read-write | mandatory | IP address of the Com-Server. |
| 1.3.6.1.4.1.5040.1.1.1.2.2 | ScalarwtSubnetMask | read-write | mandatory | Subnet mask of the Com-Server. |
| 1.3.6.1.4.1.5040.1.1.1.2.3 | ScalarwtGateway | read-write | mandatory | IP address of the gateway for making the connections to other networks. |
| 1.3.6.1.4.1.5040.1.1.1.2.4 | ScalarwtMtu | read-write | mandatory | Maximum Transfer Unit of the Com-Server (maximum length of a datagram which the Com-Server can send or receive). |
| 1.3.6.1.4.1.5040.1.1.1.2.5 | ScalarwtBootpClient | read-write | mandatory | Activates and deactivates sending of a BOOTP request after the Com-Server is restarted |
| 1.3.6.1.4.1.5040.1.1.1.2.6 | ScalarwtKeepAlive | read-write | mandatory | Period of time without network traffic after the first Keep Alive Packet will be sent |
| 1.3.6.1.4.1.5040.1.1.1.2.7 | ScalarwtRetransmTimeout | read-write | mandatory | Packet retransmission timeout in ms |
| 1.3.6.1.4.1.5040.1.1.1.2.8 | ScalarwtDhcpClient | read-write | mandatory | Activates/deactivates the DHCP client |
| 1.3.6.1.4.1.5040.1.1.1.2.9 | ScalarwtWbmPort | read-write | mandatory | TCP port number for WebBasedManagement, 0=deactive |
| 1.3.6.1.4.1.5040.1.1.1.2.10 | ScalarwtDnsSrv | read-write | mandatory | IP adress of DNS server. |
| 1.3.6.1.4.1.5040.1.1.1.2.11 | ScalarwtLinkSpeed | read-write | mandatory | Autonegotiation mode = ON or fix link speed |
| 1.3.6.1.4.1.5040.1.1.1.3 | NodewtSeriPortSetup | |||
| 1.3.6.1.4.1.5040.1.1.1.3.1 | ScalarwtSerialPorts | read-only | mandatory | Number of serial ports on Com-Server |
| 1.3.6.1.4.1.5040.1.1.1.3.2 | TablewtSeriInterfaceTable | not-accessible | mandatory | List of interface numbers for all serial ports. |
| 1.3.6.1.4.1.5040.1.1.1.3.2.1 | RowwtSeriInterfaceEntry | not-accessible | mandatory | Interface number. |
| 1.3.6.1.4.1.5040.1.1.1.3.2.1.1 | ColumnwtSeriInterfaceNo | read-only | mandatory | Interface number of the serial port. |
| 1.3.6.1.4.1.5040.1.1.1.3.3 | TablewtSeriUartTable | not-accessible | mandatory | List of the UART configurations relevant to the interface number of the serial port. |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1 | RowwtSeriUartEntry | not-accessible | mandatory | UART parameters for the serial port. |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.1 | ColumnwtBaudrate | read-write | mandatory | Baud rate of the serial CPU port. wtBaudrate-special is read only. If wtBaudDivisor is >0 the value of wtBaudrate is 18 wtBaudrate-14400 is on available with C… |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.2 | ColumnwtParity | read-write | mandatory | Parity |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.3 | ColumnwtDatabits | read-write | mandatory | Number of data bits |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.4 | ColumnwtStopbits | read-write | mandatory | Number of stop bits |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.5 | ColumnwtHsLines | read-write | mandatory | These two octets are interpreted bit-by-bit and describe individual values for configuring the handshake procedure. Bit 0 corresponds to the LSB. Octet Bit Nam… |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.6 | ColumnwtHsFunctions | read-write | mandatory | This octet is interpreted bit-by-bit and describes functions which can be assigned to the handshake lines. Bit 0 corresponds to the LSB. Octet Bit Name Descrip… |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.7 | ColumnwtUartFifo | read-write | mandatory | Send/Receive Fifo Trigger Level of the UART port |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.8 | ColumnwtUartBaudrate | read-write | mandatory | Baud rate of the UART port. With Com-Server 58631 and 58431 wtBaudrate istead of wtUartBaudrate must be used. wtUartBaudrate-special is read only. If wtUartBau… |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.9 | ColumnwtBaudDivisor | read-write | mandatory | Baud Divisor of the serial p ort (special baud rate). |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.10 | ColumnwtSeriInQueue | read-write | mandatory | Serial Receive Buffer in Bytes. The value must be even. The maximum value for all models with more than one serial port and also the Office, Compact and 19' ve… |
| 1.3.6.1.4.1.5040.1.1.1.3.4 | TablewtSeriPortTable | not-accessible | mandatory | List of the general port entries relevant to the interface number of the serial port. |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1 | RowwtSeriPortEntry | not-accessible | mandatory | Port entries for the serial port. |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.1 | ColumnwtSeriLocalPort | read-write | mandatory | Local TCP/UDP port number of the Com-Server port on which the Com-Server accepts a TCP connection or which it used in TCP client mode or UDP mode as a local po… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.2 | ColumnwtSeriPortMode | read-write | mandatory | This parameter specifies the mode of the Com-Server port. Depending on which mode is set, the corresponding list of the relevant parameters is available. If fo… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.3 | ColumnwtSeriControlPort | read-write | mandatory | TCP port number of the Com-Server's control port. In TCP client or TCP server mode this port allows to change settings like baud rate, parity etc. of the seria… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.4 | ColumnwtSeriPortState | read-only | mandatory | This value specifies the the connection state of the serial port. 0=Server mode, no connection 1=Server mode, active connection 2=Special mode, attempting to e… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.5 | ColumnwtSeriRemotePort | read-only | mandatory | If the serial port has an active TCP or UDP connection, this value shows the port number of the remote host. |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.6 | ColumnwtSeriRemoteIP | read-only | mandatory | If the serial port has an active TCP or UDP connection, this value shows the IP address of the remote host. |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.10 | ColumnwtSeriNetPckDelay | read-write | mandatory | This value indicates the minimum wait time in 10ms ticks of the Com-Server after the arrival of serial data. After this time has expired, it packs the data int… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.11 | ColumnwtSeriFlushBuf | read-write | mandatory | If this switch is active (2), the serial buffer is flushed each time a new connection is opened; any residual data which could not be sent (e.g., handshake sto… |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.12 | ColumnwtSeriTelnetEcho | read-write | mandatory | When opening a Telnet connection, there is negotiation on the network side to determine who generates the echo of the characters sent by the client. Either the… |
| 1.3.6.1.4.1.5040.1.1.1.3.5 | TablewtSeriTcpClientTable | not-accessible | mandatory | List of all serial ports in TCP client mode relevant to their interface number. |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1 | RowwtSeriTcpClientEntry | not-accessible | mandatory | TCP-Client-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.1 | ColumnwtSeriTcpServerPort | read-write | mandatory | Port number which the application (TCP server process) addresses on the computer. |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.2 | ColumnwtSeriTcpServerIp | read-write | mandatory | IP address of the computer on which the application (TCP server process) is active. |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.3 | ColumnwtSeriTcpInactTimeout | read-write | mandatory | Connection timeout in seconds. If no data are exchanged within the specified time, the Com-Server closes the connection to the server. The value 0 deactivates … |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.4 | ColumnwtSeriTcpConnectTimeout | read-write | mandatory | Connection timeout in seconds. This value is only effective in conjunction with an activated Inactivity Timeout. After the Inactivity Timeout has expired, the … |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.5 | ColumnwtSeriTcpDisconnectChar | read-write | mandatory | If the Com-Server receives the character set here on the serial port, the connection to the TCP server is closed. The character itself is not sent to the TCP s… |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.6 | ColumnwtSeriTcpDispString1 | read-write | mandatory | These parameters allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent i… |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.7 | ColumnwtSeriTcpDispString2 | read-write | mandatory | See DESCRIPTION of wtSeriTcpDispString1. |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.8 | ColumnwtSeriTcpCAddress | read-write | mandatory | Activating this switch activates TCP client mode for changing TCP servers. The address of the TCP server does not have to be permanently configured, but rather… |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.10 | ColumnwtSeriTcpResponseMode | read-write | mandatory | In Response Mode the application, special characters are output which are used to inform the application in the serial terminal device about the network-side c… |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.11 | ColumnwtSeriTcpServerUrl | read-write | mandatory | URL of the computer on which your application (TCP server process) is active. The URL can be used instead of an IP address and only in conjunction with a valid… |
| 1.3.6.1.4.1.5040.1.1.1.3.6 | TablewtSeriUdpClientTable | not-accessible | mandatory | List of all serial ports in UDP mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1 | RowwtSeriUdpClientEntry | not-accessible | mandatory | UDP mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.1 | ColumnwtSeriUdpServerPort | read-write | mandatory | Port number which the application (UDP server process) addresses on the computer. |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.2 | ColumnwtSeriUdpServerIp | read-write | mandatory | IP address of the computer on which the application (UDP server process) is active. |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.3 | ColumnwtSeriUdpDispString1 | read-write | mandatory | These parameters allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent i… |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.4 | ColumnwtSeriUdpDispString2 | read-write | mandatory | See DESCRIPTION of wtSeriUdpDispString1. |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.5 | ColumnwtSeriUdpSeriProtocol | read-write | mandatory | The protocol mode which can be activated here has been replaced by the 'Serial Socket Interface' (Mode: Multiport Protocol). For reasons of downward compatibil… |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.6 | ColumnwtSeriUdpSeriCoding | read-write | mandatory | See DESCRIPTION of wtSeriUdpSeriProtocol. |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.7 | ColumnwtSeriUdpCAddress | read-write | mandatory | Activating this option activates UDP client mode for changing UDP servers. The address of the UDP server does not have to be permanently configured, but rather… |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.8 | ColumnwtSeriUdpWrCAddress | read-write | mandatory | Set this switch to active (2) to output the address of the sender in ASCII format before sending the data of a UDP datagram to the serial port. The string alwa… |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.9 | ColumnwtSeriUdpDisconnectChar | read-write | mandatory | This parameter is only evaluated if the variable wtSeriUdpCAddress is activated. If the Com-Server port on the serial interface receives the character configur… |
| 1.3.6.1.4.1.5040.1.1.1.3.6.1.10 | ColumnwtSeriUdpServerUrl | read-write | mandatory | URL of the computer on which your application (UDP process) is active. The URL can be used instead of an IP address and only in conjunction with a valid DNS se… |
| 1.3.6.1.4.1.5040.1.1.1.3.7 | TablewtSeriTelnetClientTable | not-accessible | mandatory | List of all serial ports in Telnet client mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1 | RowwtSeriTelnetClientEntry | not-accessible | mandatory | Telnet client mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.1 | ColumnwtSeriTelnetServerPort | read-write | mandatory | Port number addressed by the Telnet server (Standard Telnet-Port: 23). |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.2 | ColumnwtSeriTelnetServerIp | read-write | mandatory | IP address of the computer on which the Telnet server is active. |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.3 | ColumnwtSeriTelnetInactTimeout | read-write | mandatory | Timeout in seconds after which the Com-Server port closes the connection. The timer is reset when there is an active network connection if data are being excha… |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.4 | ColumnwtSeriTelnetDisconnectChar | read-write | mandatory | If the Com-Server port receives the character configured here on the serial port, the Com-Server port closes the connection to the Telnet server. It is importa… |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.5 | ColumnwtSeriTelnetChangeLineout | read-write | mandatory | If this switch is activated, a 00H is appended to the serially received character 0DH: 0DH 00H is thus sent over the network. This option may need to be activa… |
| 1.3.6.1.4.1.5040.1.1.1.3.7.1.6 | ColumnwtSeriTelnetServerUrl | read-write | mandatory | URL of the computer on which your application (Telnet server process) is active. The URL can be used instead of an IP address and only in conjunction with a va… |
| 1.3.6.1.4.1.5040.1.1.1.3.8 | TablewtSeriFtpClientTable | not-accessible | mandatory | List of all serial ports in FTP client mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1 | RowwtSeriFtpClientEntry | not-accessible | mandatory | FTP client mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.1 | ColumnwtSeriFtpServerPort | read-write | mandatory | Port number which addresses the FTP server (Standard FTP-Port: 21). |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.2 | ColumnwtSeriFtpServerIp | read-write | mandatory | IP address of the computer on which the FTP server is active. |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.3 | ColumnwtSeriFtpAutoFtp | read-write | mandatory | Set this switch to 2 to activate the automatic FTP client. This mode is recommended when the same command needs to be executed over and over. The FTP commands … |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.4 | ColumnwtSeriFtpLoginString | read-write | mandatory | Command sequence for the FTP login in 'Automatic FTP-Client' mode. FTP client commands: TYPE A or I Activation of ASCII or binary mode STOR File Saves all seri… |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.5 | ColumnwtSeriFtpInactTimeout | read-write | mandatory | Configure the commands STOR and APPE(nd) with a timeout in seconds for closing the connection. If during this time no serial data are received, the FTP client … |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.6 | ColumnwtSeriFtpConnectTimeout | read-write | mandatory | Connection timeout in seconds. This value is only effective in conjunction with an activated Inactivity Timeout. After the Inactivity Timeout has expired, the … |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.7 | ColumnwtSeriFtpProtocolChar | read-write | mandatory | When the Com-Server receives the character configured here on its serial port, the Com-Server port closes the connection to the FTP server. This is also used a… |
| 1.3.6.1.4.1.5040.1.1.1.3.8.1.8 | ColumnwtSeriFtpServerUrl | read-write | mandatory | URL of the computer on which your application (FTP server process) is active. The URL can be used instead of an IP address and only in conjunction with a valid… |
| 1.3.6.1.4.1.5040.1.1.1.3.9 | TablewtSeriMultiPortPrtTable | not-accessible | mandatory | List of all serial ports in multiport protocol mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.9.1 | RowwtSeriMultiPortPrtEntry | not-accessible | mandatory | Multiport-Protocol-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.3.9.1.1 | ColumnwtSeriPrtSeriProtocol | read-write | mandatory | This switch activates/deactivates the Serial Socket Interface. Detailed protocol documentation is available on our Web site (http://www.wut.de) for downloading. |
| 1.3.6.1.4.1.5040.1.1.1.3.9.1.2 | ColumnwtSeriPrtSeriCoding | read-write | mandatory | This switch activated character doubling. It ensures reliable packet frame detection when transmitting binary data, without having to exclude certain character… |
| 1.3.6.1.4.1.5040.1.1.1.3.9.1.3 | ColumnwtSeriPrtProtocolChar | read-write | mandatory | If character doubling is not used, configure here a packet frame character. This character is not allowed to be used in the data stream. |
| 1.3.6.1.4.1.5040.1.1.1.3.10 | TablewtSeriB2bMasterTable | not-accessible | mandatory | List of all serial ports in Box-to-Box Master Mode relevant to their interface number. |
| 1.3.6.1.4.1.5040.1.1.1.3.10.1 | RowwtSeriB2bMasterEntry | not-accessible | mandatory | Box-to-Box-Master-Mode parameters. |
| 1.3.6.1.4.1.5040.1.1.1.3.10.1.1 | ColumnwtSeriB2bMaster-SlavePort | read-write | mandatory | Port number of the serial Com-Server-Slave port. |
| 1.3.6.1.4.1.5040.1.1.1.3.10.1.2 | ColumnwtSeriB2bMaster-SlaveIp | read-write | mandatory | IP address of the Com-Server in which the slave port is located. |
| 1.3.6.1.4.1.5040.1.1.1.3.10.1.3 | ColumnwtSeriB2bMaster-DispString1 | read-write | mandatory | This mode allows compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in thei… |
| 1.3.6.1.4.1.5040.1.1.1.3.10.1.4 | ColumnwtSeriB2bMaster-DispString2 | read-write | mandatory | See DESCRIPTION for wtSeriB2bMaster-DispString1. |
| 1.3.6.1.4.1.5040.1.1.1.3.11 | TablewtSeriB2bSlaveTable | not-accessible | mandatory | List of all serial ports in Box-to-Box-Slave-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.11.1 | RowwtSeriB2bSlaveEntry | not-accessible | mandatory | Box-to-Box-Slave-Mode parameters. |
| 1.3.6.1.4.1.5040.1.1.1.3.11.1.1 | ColumnwtSeriB2bSlave-MasterPort | read-only | mandatory | Port number of the serial Com-Server Master port. |
| 1.3.6.1.4.1.5040.1.1.1.3.11.1.2 | ColumnwtSeriB2bSlave-MasterIp | read-only | mandatory | IP address of the Com-Server in which the Master port is located. |
| 1.3.6.1.4.1.5040.1.1.1.3.11.1.3 | ColumnwtSeriB2bSlave-DispString1 | read-write | mandatory | This mode allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their… |
| 1.3.6.1.4.1.5040.1.1.1.3.11.1.4 | ColumnwtSeriB2bSlave-DispString2 | read-write | mandatory | See DESCRIPTION of wtSeriB2bSlave-DispString1. |
| 1.3.6.1.4.1.5040.1.1.1.3.12 | TablewtSeriIpBusTable | not-accessible | mandatory | List of all serial ports in IP-Bus-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.12.1 | RowwtSeriIpBusEntry | not-accessible | mandatory | IP-Bus-Mode parameters. |
| 1.3.6.1.4.1.5040.1.1.1.3.12.1.1 | ColumnwtSeriBusSlave-MasterIp | read-write | mandatory | Setting on Com-Server ports connected to Slaves: Set here the complete IP address of the Com-Server with the Master port. |
| 1.3.6.1.4.1.5040.1.1.1.3.12.1.2 | ColumnwtSeriBusMaster-SubnetIp | read-write | mandatory | Setting on a Com-Server port connected to the Master: Enter here the network address of the Subnet in which the Master and Slaves are located. It is sufficient… |
| 1.3.6.1.4.1.5040.1.1.1.3.13 | TablewtSeriSlipTable | not-accessible | mandatory | List of all ports in SLIP-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.3.13.1 | RowwtSeriSlipEntry | not-accessible | mandatory | SLIP-Mode parameters. |
| 1.3.6.1.4.1.5040.1.1.1.3.13.1.1 | ColumnwtSeriSlipNetAddress | read-write | mandatory | Enter here the network address of the serially connected Subnet to which you want to route using SLIP. |
| 1.3.6.1.4.1.5040.1.1.1.3.13.1.2 | ColumnwtSeriSlipNetRouting | read-write | mandatory | If this parameter has a value of 2, the Com-Server operates as a router for the Subnet specified under wtSeriSlipNetAddress. If the parameter has a value of 1,… |
| 1.3.6.1.4.1.5040.1.1.1.4 | NodewtDeaPortSetup | |||
| 1.3.6.1.4.1.5040.1.1.1.4.1 | ScalarwtDeaPorts | read-only | mandatory | Number of Com-Server digital I/O ports |
| 1.3.6.1.4.1.5040.1.1.1.4.2 | TablewtDeaInterfaceTable | not-accessible | mandatory | List of interface numbers of all digital I/O ports. |
| 1.3.6.1.4.1.5040.1.1.1.4.2.1 | RowwtDeaInterfaceEntry | not-accessible | mandatory | Interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.2.1.1 | ColumnwtDeaInterfaceNo | read-only | mandatory | Interface number of the digital I/O ports. |
| 1.3.6.1.4.1.5040.1.1.1.4.3 | TablewtDeaPortTable | not-accessible | mandatory | List of the general port entries relevant to the interface number of the digital I/O ports. |
| 1.3.6.1.4.1.5040.1.1.1.4.3.1 | RowwtDeaPortEntry | not-accessible | mandatory | Port entries of the digital I/O ports. |
| 1.3.6.1.4.1.5040.1.1.1.4.3.1.1 | ColumnwtDeaLocalPort | read-write | mandatory | Local TCP/UDP port number of the Com-Server port. Port number on which the Com-Server accepts a TCP connection or which it uses as a local port in TCP client m… |
| 1.3.6.1.4.1.5040.1.1.1.4.3.1.2 | ColumnwtDeaPortMode | read-write | mandatory | This parameter specifies the mode for the Com-Server port. Depending on which mode is set, the corresponding list of the relevant parameters is available. If f… |
| 1.3.6.1.4.1.5040.1.1.1.4.3.1.3 | ColumnwtDeaDrvWatchdog | read-write | mandatory | This parameter allows control of all instances which are active between the card driver in the Com-Server and the application on the computer, including the co… |
| 1.3.6.1.4.1.5040.1.1.1.4.4 | TablewtDeaTcpClientTable | not-accessible | mandatory | List of all digital I/O ports in TCP-Client-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1 | RowwtDeaTcpClientEntry | not-accessible | mandatory | TCP-Client-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1.1 | ColumnwtDeaTcpServerPort | read-write | mandatory | Port number which the application (TCP server process) addresses on the computer. |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1.2 | ColumnwtDeaTcpServerIp | read-write | mandatory | IP address of the computer on which the application (TCP server process) is active. |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1.3 | ColumnwtDeaTcpInactTimeout | read-write | mandatory | Connection timeout in seconds. If no data are exchanged within the specified time, the Com-Server closes the connection to the TCP server. The value 0 deactiva… |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1.4 | ColumnwtDeaTcpConnectTimeout | read-write | mandatory | Connection timeout in seconds. This value is only effective in conjunction with an activated inactivity timeout. After the inactivity timeout has expired, the … |
| 1.3.6.1.4.1.5040.1.1.1.4.4.1.5 | ColumnwtDeaTcpInputMask | read-write | mandatory | Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the TCP connection to the application (TCP se… |
| 1.3.6.1.4.1.5040.1.1.1.4.5 | TablewtDeaUdpClientTable | not-accessible | mandatory | List of all digital I/O ports in UDP-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1 | RowwtDeaUdpClientEntry | not-accessible | mandatory | UDP-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1.1 | ColumnwtDeaUdpServerPort | read-write | mandatory | Port number which the application (UPD server process) on the computer addresses. |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1.2 | ColumnwtDeaUdpServerIp | read-write | mandatory | IP address of the computer on which the application (UDP server process) is active. |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1.3 | ColumnwtDeaUdpPacketProtocol | read-write | mandatory | This switch activates (2) or deactivates (1) of the control procedure for the packet sequence in UDP mode (see also manual for I/O Com-Server. |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1.4 | ColumnwtDeaUdpInputMask | read-write | mandatory | Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the TCP connection to the application (TCP se… |
| 1.3.6.1.4.1.5040.1.1.1.4.5.1.5 | ColumnwtDeaUdpSendInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the card driver sends the I/O structure 'Write Register' with the contents of the input register to the confi… |
| 1.3.6.1.4.1.5040.1.1.1.4.6 | TablewtDeaSnmpAgentTable | not-accessible | mandatory | List of all digital I/O ports in Snmp-Agent-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.6.1 | RowwtDeaSnmpAgentEntry | not-accessible | mandatory | Snmp-Agent-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.4.6.1.1 | ColumnwtDeaSnmpManagerIp | read-write | mandatory | IP address of the computer on which the SNMP Manager is located to which the Com-Server should send SNMP traps. |
| 1.3.6.1.4.1.5040.1.1.1.4.6.1.2 | ColumnwtDeaSnmpInputMask | read-write | mandatory | Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, an SNMP trap with the variable dDrvInputRegis… |
| 1.3.6.1.4.1.5040.1.1.1.4.6.1.3 | ColumnwtDeaSnmpSendInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the card driver reads the input register and sends an SNMP trap with the variable dDrvInputRegister (see TRAP… |
| 1.3.6.1.4.1.5040.1.1.1.4.7 | TablewtDeaB2bMasterTable | not-accessible | mandatory | List of all digital I/O ports in Box-to-Box-Master-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.7.1 | RowwtDeaB2bMasterEntry | not-accessible | mandatory | Box-to-Box-Master-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.4.7.1.1 | ColumnwtDeaB2bMaster-SlavePort | read-write | mandatory | Port number of the digital I/O Com-Server-Slave port. |
| 1.3.6.1.4.1.5040.1.1.1.4.7.1.2 | ColumnwtDeaB2bMaster-SlaveIp | read-write | mandatory | IP address of the I/O Com-Server in which the Slave port is located. |
| 1.3.6.1.4.1.5040.1.1.1.4.7.1.3 | ColumnwtDeaB2bMaster-InputMask | read-write | mandatory | Here the inputs to be polled by the card drive are configured. When a level change occurs on one or more inputs, the entire input register is sent over the net… |
| 1.3.6.1.4.1.5040.1.1.1.4.7.1.4 | ColumnwtDeaB2bMaster-SendInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the card driver maps the input register to the output register of the other I/O port. A value of 0 deactivate… |
| 1.3.6.1.4.1.5040.1.1.1.4.8 | TablewtDeaB2bSlaveTable | not-accessible | mandatory | List of all digital I/O ports in Box-to-Box-Slave-Mode relevant to their interface number |
| 1.3.6.1.4.1.5040.1.1.1.4.8.1 | RowwtDeaB2bSlaveEntry | not-accessible | mandatory | Box-to-Box-Slave-Mode parameters |
| 1.3.6.1.4.1.5040.1.1.1.4.8.1.1 | ColumnwtDeaB2bSlave-MasterPort | read-only | mandatory | Port number of the digital I/O Com-Server-Master port. |
| 1.3.6.1.4.1.5040.1.1.1.4.8.1.2 | ColumnwtDeaB2bSlave-MasterIp | read-only | mandatory | IP address of the I/O Com-Server in which the Master port is located. |
| 1.3.6.1.4.1.5040.1.1.1.4.8.1.3 | ColumnwtDeaB2bSlave-InputMask | read-write | mandatory | Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the entire input register is sent over the ne… |
| 1.3.6.1.4.1.5040.1.1.1.4.8.1.4 | ColumnwtDeaB2bSlave-SendInterval | read-write | mandatory | Configurable interval with a 100ms base, in which the card driver maps the input register to the output register of the other I/O port. The value 0 deactivates… |
| 1.3.6.1.4.1.5040.1.1.2 | NodewtDeaDriver | |||
| 1.3.6.1.4.1.5040.1.1.2.1 | TablewtDeaDrvTable | not-accessible | mandatory | List of all functions for managing the digital I/O port relevant to their interface number. |
| 1.3.6.1.4.1.5040.1.1.2.1.1 | RowwtDeaDrvEntry | not-accessible | mandatory | Functions for managing a digital I/O port. |
| 1.3.6.1.4.1.5040.1.1.2.1.1.1 | NodedeaInputChangedAlert | This SNMP trap is generated when the level of an input on the digital I/O port has changed. | ||
| 1.3.6.1.4.1.5040.1.1.2.1.1.1 | ColumnwtDeaDrvInterfaceNo | read-only | mandatory | Interface number of the digital I/O port. |
| 1.3.6.1.4.1.5040.1.1.2.1.1.2 | NodedeaIntervalExpiredAlert | This SNMP trap is generated in the interval configured in the variable wtDeaDrvTrapInterval or variable wtDeaSnmpSendInterval. | ||
| 1.3.6.1.4.1.5040.1.1.2.1.1.2 | ColumnwtDeaDrvInputRegister | read-only | mandatory | This variable is used to read the outputs of the digital I/O port. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corre… |
| 1.3.6.1.4.1.5040.1.1.2.1.1.3 | ColumnwtDeaDrvOutputRegister | read-write | mandatory | This variable is used to read and write the outputs of the digital I/O port. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. B… |
| 1.3.6.1.4.1.5040.1.1.2.1.1.4 | ColumnwtDeaDrvSetBit | read-write | mandatory | This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds … |
| 1.3.6.1.4.1.5040.1.1.2.1.1.5 | ColumnwtDeaDrvTrapInputMask | read-write | mandatory | Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, an SNMP trap is sent to the configured SNMP M… |
| 1.3.6.1.4.1.5040.1.1.2.1.1.6 | ColumnwtDeaDrvTrapInterval | read-write | mandatory | Configurable variable with a 100ms basis, in which the card driver reads the input register and sends an SNMP trap to the configured SNMP Manager with the vari… |