DASAN-SWITCH-MIB
373 objects
The MIB module to describe Switch product.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.9.1 | IdentitydasanSwitchMIB | The MIB module to describe Switch product. | ||
| 1.3.6.1.4.1.6296.9.1.1.1 | NodedsSwitchSystem | |||
| 1.3.6.1.4.1.6296.9.1.1.1.1 | ScalardsResetSystem | read-write | current | Send system-reset to this system. |
| 1.3.6.1.4.1.6296.9.1.1.1.2 | ScalardsWriteConfig | read-write | current | Write current running configuration to flash memory. |
| 1.3.6.1.4.1.6296.9.1.1.1.3 | ScalardsOsVersion | read-only | current | The version of running OS. |
| 1.3.6.1.4.1.6296.9.1.1.1.4 | ScalardsTftpServer | read-write | current | The IP address or hostname of TFTP server. |
| 1.3.6.1.4.1.6296.9.1.1.1.5 | ScalardsTftpFile | read-write | current | The Remote file name |
| 1.3.6.1.4.1.6296.9.1.1.1.6 | ScalardsTftpStatus | read-write | current | TFTP transaction status. To receive a file from remote server, get is used. To send OS or Configuration to remote server, put is used. Abort can be used to ter… |
| 1.3.6.1.4.1.6296.9.1.1.1.7 | ScalardsTftpFileType | read-write | current | TFTP file type. The value of cpe-nos(2) is only available, in case of dsVdsl. |
| 1.3.6.1.4.1.6296.9.1.1.1.8 | ScalardsCpuLoad5s | read-only | current | The Avg. Value of CPU Load for 5 seconds |
| 1.3.6.1.4.1.6296.9.1.1.1.9 | ScalardsCpuLoad1m | read-only | current | The Avg. Value of CPU Load for 1 minute |
| 1.3.6.1.4.1.6296.9.1.1.1.10 | ScalardsCpuLoad10m | read-only | current | The Avg. Value of CPU Load for 10 minutes |
| 1.3.6.1.4.1.6296.9.1.1.1.11 | ScalardsCpuLoad5sisr | read-only | current | The Avg. Value of CPU Load for 5 seconds(interupt service routine) |
| 1.3.6.1.4.1.6296.9.1.1.1.12 | ScalardsCpuLoad1misr | read-only | current | The Avg. Value of CPU Load for 1 minute(interupt service routine) |
| 1.3.6.1.4.1.6296.9.1.1.1.13 | ScalardsCpuLoad10misr | read-only | current | The Avg. Value of CPU Load for 10 minutes(interupt service routine) |
| 1.3.6.1.4.1.6296.9.1.1.1.14 | ScalardsTotalMem | read-only | current | The Total memory of system |
| 1.3.6.1.4.1.6296.9.1.1.1.15 | ScalardsUsedMem | read-only | current | The Used memory of system |
| 1.3.6.1.4.1.6296.9.1.1.1.16 | ScalardsFreeMem | read-only | current | The Free memory of sytem |
| 1.3.6.1.4.1.6296.9.1.1.1.17 | ScalardsHardwareVersion | read-only | current | The Hardware version of system. |
| 1.3.6.1.4.1.6296.9.1.1.1.18 | ScalardsSoftwareCompatibility | read-only | current | The Software Compatibility |
| 1.3.6.1.4.1.6296.9.1.1.1.19 | ScalardsSerialNumber | read-only | current | The Serial number of system |
| 1.3.6.1.4.1.6296.9.1.1.1.20 | ScalardsFirmwareVersion | read-only | current | The Firmware version of system |
| 1.3.6.1.4.1.6296.9.1.1.1.21 | ScalardsHardwareAddress | read-only | current | The Firmware version of system |
| 1.3.6.1.4.1.6296.9.1.1.1.22 | ScalardsTimeZone | read-write | current | The Time zone. |
| 1.3.6.1.4.1.6296.9.1.1.1.30 | NodedsSystemNOSInfo | |||
| 1.3.6.1.4.1.6296.9.1.1.1.30.1 | TabledsSystemNOSTable | not-accessible | current | A list of dsSystemNOSEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.1.1 | RowdsSystemNOSEntry | not-accessible | current | An entry containing management information applicable to a particular . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.1 | ColumndsSystemNOSIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.2 | ColumndsSystemNOSName | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.3 | ColumndsSystemNOSVersion | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.4 | ColumndsSystemNOSSize | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2 | NodedsSystemUpgradeInfo | |||
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.1 | ScalardsSystemUpgradeMethod | read-write | current | FTP or TFTP. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.2 | ScalardsSystemUpgradeAddressType | read-write | current | Determine whether using IPv4 or IPv6, etc. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.3 | ScalardsSystemUpgradeAddress | read-write | current | The server address. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.4 | ScalardsSystemUpgradeUser | read-write | current | The user name. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.5 | ScalardsSystemUpgradePasswd | read-write | current | The password. In case of ftp, need password. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.6 | ScalardsSystemUpgradePath | read-write | current | Indicate where NOS exist. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.7 | ScalardsSystemUpgradeStorage | read-write | current | The type of NOS. |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.8 | ScalardsSystemUpgradeValue | read-write | current | Additional information. ex) the slot-number of xDSL,... . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.9 | ScalardsSystemUpgradeStatus | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.15 | NodedsSystemUpgradeNotification | |||
| 1.3.6.1.4.1.6296.9.1.1.1.30.2.15.1 | NotificationdsSystemUpgraded | current | . | |
| 1.3.6.1.4.1.6296.9.1.1.2 | NodedsSwitchModules | |||
| 1.3.6.1.4.1.6296.9.1.1.2.4 | TabledsPortTable | not-accessible | current | A list of dsPortEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1 | RowdsPortEntry | not-accessible | current | An entry containing management information applicable to a particular port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.1 | ColumndsPortModuleIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.2 | ColumndsPortPortIndex | read-only | current | A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-lay… |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.3 | ColumndsPortType | read-only | current | The type of communication port. This string defines the type of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.4 | ColumndsPortIfIndex | read-only | current | matching ifIndex oid which is defined in interface mib. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.5 | ColumndsPortPVID | read-write | current | The PVID of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.6 | ColumndsPortShared | read-only | current | The Shared status of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.7 | ColumndsPortNego | read-write | current | The Nego mode of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.8 | ColumndsPortDuplex | read-write | current | The duplex status of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.9 | ColumndsPortUpSpeed | read-only | current | Upstream speed of port. bits/second |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.10 | ColumndsPortDownSpeed | read-only | current | Downstream speed of port. bits/second |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.11 | ColumndsPortFlowControl | read-write | current | The flow control mode of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.12 | ColumndsPortIngressrate | read-write | current | A incomming rate limit control value. In case of Vdsl QAM20, it means constellation value of each port. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.13 | ColumndsPortEgressrate | read-write | current | A outgoing rate limit control value. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.14 | ColumndsPortInstallStatus | read-only | current | The install status of optional module. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.15 | ColumndsPortCurrentHost | read-only | current | The number hosts which is allowed to be used. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.16 | ColumndsPortMaxHost | read-write | current | The maximum number hosts which can be allowed to be used. '-1' means the unlimited max-host value. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.26 | ColumndsPortUpUtil5s | read-only | current | Upstream traffic utilization during last 5 seconfs. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.27 | ColumndsPortUpUtil1m | read-only | current | Upstream traffic utilization during last 1 minute. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.28 | ColumndsPortUpUtil10m | read-only | current | Upstream traffic utilization during last 10 minute. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.29 | ColumndsPortDownUtil5s | read-only | current | Downstream traffic utilization during last 5 seconfs. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.30 | ColumndsPortDownUtil1m | read-only | current | Downstream traffic utilization during last 1 minute. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.31 | ColumndsPortDownUtil10m | read-only | current | Downstream traffic utilization during last 10 minute. Unit: bps |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.32 | ColumndsPortDescription | read-write | current | Port description string |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.33 | ColumndsPortWanAdminStatus | read-write | current | Administrative status of WAN port |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.34 | ColumndsPortWanOperStatus | read-only | current | Operational status of WAN port |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.35 | ColumndsPortReset | read-write | current | Operational Reset of port |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.40 | ColumndsPortSpeed | read-write | current | switch port speed. bits/second. these value is vaild, 10000000,100000000,1000000000. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.41 | ColumndsPortCurrUpTime | read-write | current | Port's link-up time within the current one day interval. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.42 | ColumndsPortPrevUpTime | read-write | current | Port's link-up time for the previous one day . |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.43 | ColumndsPortTrunkID | read-only | current | The trunk ID that this port belong to. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.44 | ColumndsPortCRCCount | read-only | current | The trunk ID that this port belong to. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.45 | ColumndsPortRateLimitUnit | read-write | current | The rate-limit unit value. only for V2XXX. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.46 | ColumndsPortRateLimitIngressThreshold | read-write | current | The rate-limit ingress threshold value. only for V2XXX. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.48 | ColumndsPortRateLimitEgressThreshold | read-write | current | The rate-limit egress threshold value. only for V2XXX. |
| 1.3.6.1.4.1.6296.9.1.1.2.4.1.49 | ColumndsPortCableLength | read-only | current | Description. |
| 1.3.6.1.4.1.6296.9.1.1.2.5 | TabledsTemperatureTable | not-accessible | current | A list of dsTemperatureEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.5.1 | RowdsTemperatureEntry | not-accessible | current | An entry containing temperature information. |
| 1.3.6.1.4.1.6296.9.1.1.2.5.1.1 | ColumndsTemperatureNodeIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.5.1.2 | ColumndsTemperatureIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.5.1.3 | ColumndsTemperatureStatus | read-only | current | dsTemperature status information |
| 1.3.6.1.4.1.6296.9.1.1.2.6 | TabledsPowerTable | not-accessible | current | A list of dsPowerEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.6.1 | RowdsPowerEntry | not-accessible | current | An entry containing dsPower information. |
| 1.3.6.1.4.1.6296.9.1.1.2.6.1.1 | ColumndsPowerNodeIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.6.1.2 | ColumndsPowerIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.6.1.3 | ColumndsPowerstatus | read-only | current | dsPower status information |
| 1.3.6.1.4.1.6296.9.1.1.2.6.1.4 | ColumndsPowerinstalled | read-only | current | dsPower install information |
| 1.3.6.1.4.1.6296.9.1.1.2.7 | TabledsFanTable | not-accessible | current | A list of dsFanEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.7.1 | RowdsFanEntry | not-accessible | current | An entry containing fan information. |
| 1.3.6.1.4.1.6296.9.1.1.2.7.1.1 | ColumndsFanNodeIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.7.1.2 | ColumndsFanIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.7.1.3 | ColumndsFanstatus | read-only | current | dsFan status information |
| 1.3.6.1.4.1.6296.9.1.1.2.7.1.4 | ColumndsFaninstalled | read-only | current | dsFan install information |
| 1.3.6.1.4.1.6296.9.1.1.2.8 | TabledsVdslPortTable | not-accessible | current | A list of dsVdslPortEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1 | RowdsVdslPortEntry | not-accessible | current | An entry containing management information applicable to a particular dsVdsl port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.1 | ColumndsVdslModuleIndex | read-only | current | A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-l… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.2 | ColumndsVdslPortIndex | read-only | current | A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-lay… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.3 | ColumndsVdslPortType | read-only | current | The type of dsVdsl port. This string defines the type of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.4 | ColumndsVdslPortIfIndex | read-only | current | matching ifIndex oid which is defined in interface mib. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.5 | ColumndsVdslPortUpProfile | read-write | current | dsVdsl Upstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmetri… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.6 | ColumndsVdslPortDownProfile | read-write | current | dsVdsl Downstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmet… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.7 | ColumndsVdslPortUpPhysicalSpeed | read-only | current | Upstream attainable speed of port. bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.8 | ColumndsVdslPortDownPhysicalSpeed | read-only | current | Downstream attainable speed of port. bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.9 | ColumndsVdslPortUpSpeed | read-only | current | Upstream speed of port. bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.10 | ColumndsVdslPortDownSpeed | read-only | current | Downstream speed of port. bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.11 | ColumndsVdslPortServiceError | read-only | current | The raw accumulating dsVdsl service Error count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.12 | ColumndsVdslPortErrorCRC | read-only | current | The raw accumulating dsVdsl CRC Error count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.13 | ColumndsVdslPortErrorSecond | read-only | current | The raw accumulating dsVdsl Error Second. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.14 | ColumndsVdslPortErrorLOF | read-only | current | The raw accumulating dsVdsl loss of frame. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.15 | ColumndsVdslPortErrorLOS | read-only | current | The raw accumulating dsVdsl loss of signal. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.16 | ColumndsVdslPortErrorLPR | read-only | current | The raw accumulating dsVdsl loss of power. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.17 | ColumndsVdslPortErrorLOL | read-only | current | The raw accumulating dsVdsl loss of link. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.18 | ColumndsVdslPort15mElapsedTime | read-only | current | The current elapsed time from reinitializing point per 15 minutes. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.19 | ColumndsVdslPort1dayElapsedTime | read-only | current | The current elapsed time from reinitializing point per 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.20 | ColumndsVdslPortServiceErrorPrev15m | read-only | current | The accumulating Serivce-Error count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.21 | ColumndsVdslPortServiceErrorCurr15m | read-only | current | The accumulating Service-Error count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.22 | ColumndsVdslPortErrorCRCPrev15m | read-only | current | The accumulating CRC-error count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.23 | ColumndsVdslPortErrorCRCCurr15m | read-only | current | The accumulating CRC-error count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.24 | ColumndsVdslPortErrorSecondPrev15m | read-only | current | The accumulating errored-second count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.25 | ColumndsVdslPortErrorSecondCurr15m | read-only | current | The accumulating errored-second count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.26 | ColumndsVdslPortErrorLOFPrev15m | read-only | current | The accumulating loss-of-frame count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.27 | ColumndsVdslPortErrorLOFCurr15m | read-only | current | The accumulating loss-of-frame count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.28 | ColumndsVdslPortErrorLOSPrev15m | read-only | current | The accumulating loss-of-signal count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.29 | ColumndsVdslPortErrorLOSCurr15m | read-only | current | The accumulating loss-of-signal count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.30 | ColumndsVdslPortErrorLPRPrev15m | read-only | current | The accumulating loss-of-power count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.31 | ColumndsVdslPortErrorLPRCurr15m | read-only | current | The accumulating loss-of-power count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.32 | ColumndsVdslPortErrorLOLPrev15m | read-only | current | The accumulating loss-of-link count of previous 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.33 | ColumndsVdslPortErrorLOLCurr15m | read-only | current | The accumulating loss-of-link count of current 15 minute. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.34 | ColumndsVdslPortServiceErrorPrev1day | read-only | current | The accumulating Serivce-Error count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.35 | ColumndsVdslPortServiceErrorCurr1day | read-only | current | The accumulating Service-Error count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.36 | ColumndsVdslPortErrorCRCPrev1day | read-only | current | The accumulating CRC-error count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.37 | ColumndsVdslPortErrorCRCCurr1day | read-only | current | The accumulating CRC-error count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.38 | ColumndsVdslPortErrorSecondPrev1day | read-only | current | The accumulating errored-second count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.39 | ColumndsVdslPortErrorSecondCurr1day | read-only | current | The accumulating errored-second count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.40 | ColumndsVdslPortErrorLOFPrev1day | read-only | current | The accumulating loss-of-frame count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.41 | ColumndsVdslPortErrorLOFCurr1day | read-only | current | The accumulating loss-of-frame count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.42 | ColumndsVdslPortErrorLOSPrev1day | read-only | current | The accumulating loss-of-signal count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.43 | ColumndsVdslPortErrorLOSCurr1day | read-only | current | The accumulating loss-of-signal count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.44 | ColumndsVdslPortErrorLPRPrev1day | read-only | current | The accumulating loss-of-power count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.45 | ColumndsVdslPortErrorLPRCurr1day | read-only | current | The accumulating loss-of-power count of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.46 | ColumndsVdslPortErrorLOLPrev1day | read-only | current | The accumulating loss-of-link count of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.47 | ColumndsVdslPortErrorLOLCurr1day | read-only | current | The accumulating loss-of-link count of current 1 day |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.48 | ColumndsVdslPortUpSNR | read-only | current | dsVdsl upstream SNR * 1000. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.49 | ColumndsVdslPortDownSNR | read-only | current | dsVdsl downstream SNR * 1000. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.50 | ColumndsVdslPortUpSNRMargin | read-only | current | dsVdsl upstream SNR Margin(CO SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.51 | ColumndsVdslPortDownSNRMargin | read-only | current | dsVdsl downstream SNR Margin(CPE SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.52 | ColumndsVdslPortUpAttenuation | read-only | current | dsVdsl upstream port attenuation(CO Attenuation). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.53 | ColumndsVdslPortDownAttenuation | read-only | current | dsVdsl downstream port attenuation(CPE Attenuation). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.54 | ColumndsVdslPortOutPower | read-only | current | dsVdsl port Output Power. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.55 | ColumndsVdslPortWanInPkt | read-only | current | dsVdsl WAN in-packet count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.56 | ColumndsVdslPortWanInErr | read-only | current | dsVdsl WAN error packet count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.57 | ColumndsVdslPortWanOutPkt | read-only | current | dsVdsl WAN out-packet count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.58 | ColumndsVdslPortWanReset | read-write | current | Reaquire dsVdsl line SYNC. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.59 | ColumndsVdslPortWanLoopbackAction | read-write | current | Perform remote loopback ping test. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.60 | ColumndsVdslPortWanLoopbackStatus | read-only | current | Latest remote loopback test result. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.61 | ColumndsVdslPortWanAdminStatus | read-write | current | Administrative status of WAN port |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.62 | ColumndsVdslPortWanOperStatus | read-only | current | Operational status of WAN port |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.63 | ColumndsVdslPortVOCLinkStatus | read-only | current | PC Ethernet link status through VOC channel. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.64 | ColumndsVdslPortVOCLinkDuplex | read-only | current | PC link duplex through VOC channel. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.65 | ColumndsVdslPortVOCLinkSpeed | read-only | current | PC link speed through VOC channel. bits/second(bps). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.66 | ColumndsVdslPortOptionband | read-write | current | dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.67 | ColumndsVdslPortHamband | read-write | current | dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(b… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.68 | ColumndsVdslPortUpInterleave | read-write | current | dsVdslPort Upstream Interleave delay. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.69 | ColumndsVdslPortDownInterleave | read-write | current | dsVdslPort Downstream Interleave delay. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.70 | ColumndsVdslPortTargetUpSNRMargin | read-write | current | dsVdsl Target upstream SNR Margin(CO SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.71 | ColumndsVdslPortTargetDownSNRMargin | read-write | current | dsVdsl Target downstream SNR Margin(CPE SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.72 | ColumndsVdslPortPSDMaskLevel | read-write | current | dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI … |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.73 | ColumndsVdslPortPBOLength | read-write | current | dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.74 | ColumndsVdslPort15mElapsedTimeSeconds | read-only | current | The current elapsed time from reinitializing point per 15 minutes in seconds. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.75 | ColumndsVdslPort1dayElapsedTimeSeconds | read-only | current | The current elapsed time from reinitializing point per 1 day in seconds. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.76 | ColumndsVdslPortUpServiceProfile | read-only | current | dsVdslPort upstream service profile. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.77 | ColumndsVdslPortDownServiceProfile | read-only | current | dsVdslPort downstream service profile. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.78 | ColumndsVdslPortModemReset | read-write | current | Reset the Modem. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.79 | ColumndsVdslPortCPEVersion | read-only | current | dsVdslPort CPE NOS informations. The format of value is 'OS1/OS2/ActiveOS'. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.80 | ColumndsVdslPortCPEDownload | read-write | current | Download the CPE NOS. no(0) : No CPE NOS download. yes(1) : Now downloading. done(2) : Download completed. fail(3) : Download fail. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.81 | ColumndsVdslPortLineActiveTimePrev1Day | read-only | current | The accumulating Line Active time of previous 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.82 | ColumndsVdslPortLineActiveTimeCurr1Day | read-only | current | The accumulating Line Active time of current 1 day. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.83 | ColumndsVdslPortLineConfProfileClear | read-write | current | To remove the line configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.84 | ColumndsVdslPortAlarmConfProfileClear | read-write | current | To remove the alarm configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.86 | ColumndsVdslPortEwl | read-only | current | Vdsl Port wire length. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.87 | ColumndsVdslPortGhsNearEndEwl | read-only | current | Vdsl Port Near End wire length. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.88 | ColumndsVdslPortGhsFarEndEwl | read-only | current | Vdsl Port Far End wire length. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.89 | ColumndsVdslPortLineActiveTimeClear | read-write | current | To initialize Line Active time. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.90 | ColumndsVdslPortServiceErrorClear | read-write | current | To initialize . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.91 | ColumndsVdslPortErrorCRCClear | read-write | current | To initialize . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.92 | ColumndsVdslPortErrorSecondClear | read-write | current | To initialize Count of ErrorSecond . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.93 | ColumndsVdslPortErrorLOFClear | read-write | current | To initialize Count of the number of LOF . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.94 | ColumndsVdslPortErrorLOSClear | read-write | current | To initialize Count of the number of LOS . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.95 | ColumndsVdslPortErrorLPRClear | read-write | current | To initialize Count of the number of LPR . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.96 | ColumndsVdslPortErrorLOLClear | read-write | current | To initialize Count of the number of LOL . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.106 | ColumndsVdslPortErrorCountClear | read-write | current | To initialize all error-count-value. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.108 | ColumndsVdslPortCpeErrorCRC | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.110 | ColumndsVdslPortCpePerfLOF | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.111 | ColumndsVdslPortCpePerfLos | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.113 | ColumndsVdslPortCpePerfLol | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.114 | ColumndsVdslPortCpePerfCountClear | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.115 | ColumndsVdslPortSuperFrameRxCount | read-only | current | Rx SuperFrame Count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.116 | ColumndsVdslPortSuperFrameTxCount | read-only | current | Tx SuperFrame Count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.117 | ColumndsVdslPortSuperFrameCountClear | read-write | current | Rx SuperFrame Count Clear. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.119 | ColumndsVdslPortPerfRxCRC | read-only | current | Rx CRC Count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.120 | ColumndsVdslPortPerfTxCRC | read-only | current | Tx CRC Count. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.121 | ColumndsVdslPortStandard | read-write | current | VDSL Standard. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.122 | ColumndsVdslPortLineProfile | read-write | current | sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.123 | ColumndsVdslPortMode | read-write | current | normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.124 | ColumndsVdslPortProfileSet | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.126 | ColumndsVdslPortUpboEnable | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.127 | ColumndsVdslPortChannel | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.128 | ColumndsVdslPortTCMAdmin | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.129 | ColumndsVdslPortUpSNRMinMargin | read-write | current | dsVdsl upstream Min SNR Margin(CO Min SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.130 | ColumndsVdslPortDownSNRMinMargin | read-write | current | dsVdsl downstream Min SNR Margin(CPE Min SNR Margin). |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.131 | ColumndsVdslPortUpINP | read-write | current | dsVdsl upstream INP. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.132 | ColumndsVdslPortDownINP | read-write | current | dsVdsl downstream INP . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.133 | ColumndsVdslPortMiiInBytes | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.134 | ColumndsVdslPortMiiInBPS | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.135 | ColumndsVdslPortMiiOutBytes | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.136 | ColumndsVdslPortMiiOutBPS | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.137 | ColumndsVdslPortHardwareAddress | read-only | current | The Hardware Address of User. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.138 | ColumndsVdslPortRedundancySet | read-write | current | Redundancy Port Set. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.139 | ColumndsVdslCpeNegoState | read-write | current | The Nego mode of CPE Ethernet port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.140 | ColumndsVdslCpeDuplex | read-write | current | The Duplex state of CPE Ethernet port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.141 | ColumndsVdslCpeSpeed | read-write | current | The Speed of CPE Ethernet port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.142 | ColumndsVdslPortLinkUpTime | read-only | current | LinkUp duration time of port. |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.143 | ColumndsVdslPortLastRetraingReason | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.145 | ColumndsVdslPortU0BandPBOLength | read-write | current | dsVdsl U0 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.146 | ColumndsVdslPortU1BandPBOLength | read-write | current | dsVdsl U1 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.147 | ColumndsVdslPortU2BandPBOLength | read-write | current | dsVdsl U2 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.148 | ColumndsVdslPortU3BandPBOLength | read-write | current | dsVdsl U3 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.149 | ColumndsVdslPortDownCurrAttainableRate | read-only | current | Indicates the maximum currently down attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLine… |
| 1.3.6.1.4.1.6296.9.1.1.2.8.1.150 | ColumndsVdslPortUpCurrAttainableRate | read-only | current | Indicates the maximum currently up attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRa… |
| 1.3.6.1.4.1.6296.9.1.1.2.9 | TabledsVdslSlotTable | not-accessible | current | A list of dsVdslSlotEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1 | RowdsVdslSlotEntry | not-accessible | current | An entry containing management information applicable to a particular dsVdsl Slot. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.1 | ColumndsVdslSlotModuleIndex | read-only | current | A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.2 | ColumndsVdslSlotIndex | read-only | current | A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.3 | ColumndsVdslSlotType | read-only | current | The type of each slot. This string defines the type of slot ex) Vdsl, GBIC. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.4 | ColumndsVdslSlotInstallStatus | read-only | current | The current install status of each slot. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.5 | ColumndsVdslSlotProfile | read-write | current | dsVdsl profile ID. asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PL… |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.6 | ColumndsVdslSlotOptionband | read-write | current | dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.7 | ColumndsVdslSlotHamband | read-write | current | dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(b… |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.8 | ColumndsVdslSlotPSDMaskLevel | read-write | current | dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI … |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.9 | ColumndsVdslSlotPBOLength | read-write | current | dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.10 | ColumndsVdslSlotUpServiceProfile | read-only | current | dsVdsl slot upstream service profile. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.11 | ColumndsVdslSlotDownServiceProfile | read-only | current | dsVdsl slot downstream service profile. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.12 | ColumndsVdslSlotLIUReboot | read-write | current | dsVdsl LIU slot reboot. |
| 1.3.6.1.4.1.6296.9.1.1.2.9.1.13 | ColumndsVdslSlotLIUCPENOSStore | read-write | current | Store CPE NOS into each dsVdsl slot. no(0) : No CPE NOS store. yes(1) : Now storing. done(2) : Storing completed. fail(3) : Storing fail |
| 1.3.6.1.4.1.6296.9.1.1.2.10 | TabledsSystemSlotTable | not-accessible | current | A list of slotEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1 | RowdsSystemSlotEntry | not-accessible | current | An entry containing management information applicable to a particular switch Slot. |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.1 | ColumndsSystemSlotModuleIndex | read-only | current | A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.2 | ColumndsSystemSlotIndex | read-only | current | A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.3 | ColumndsSystemSlotType | read-only | current | The type of each slot. This string defines the type of slot ex) TX-10/100, FX-100, GBIC, SWU, ADSL2+, ADSL, SHDSL, Vdsl, Ethernet |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.4 | ColumndsSystemSlotInstallStatus | read-only | current | The current install status of each slot. |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.5 | ColumndsSystemSlotStatus | read-only | current | The current slot status |
| 1.3.6.1.4.1.6296.9.1.1.2.10.1.6 | ColumndsSystemSlotPortNum | read-only | current | The number of port on the slot. |
| 1.3.6.1.4.1.6296.9.1.1.2.11 | TabledsSwitchUserMacTable | not-accessible | current | A list of dsSwitchUserMacEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1 | RowdsSwitchUserMacEntry | not-accessible | current | An entry containing management information applicable to a particular switch User mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.1 | ColumndsUserMacModuleIndex | read-only | current | A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.2 | ColumndsUserMacPortIndex | read-only | current | A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.3 | ColumndsUserMacAddress1 | read-only | current | The first entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.4 | ColumndsUserMacAddress2 | read-only | current | The second entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.5 | ColumndsUserMacAddress3 | read-only | current | The third entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.6 | ColumndsUserMacAddress4 | read-only | current | The fourth entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.7 | ColumndsUserMacAddress5 | read-only | current | The fifth entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.8 | ColumndsUserMacAddress6 | read-only | current | The sixth entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.9 | ColumndsUserMacAddress7 | read-only | current | The seventh entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.11.1.10 | ColumndsUserMacAddress8 | read-only | current | The eighth entry of lastest user mac address. |
| 1.3.6.1.4.1.6296.9.1.1.2.12 | TabledsSwitchAtTable | not-accessible | current | A list of dsSwitchUserMacEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.12.1 | RowdsSwitchAtEntry | not-accessible | current | An entry containing management information applicable to a particular switch ARP. |
| 1.3.6.1.4.1.6296.9.1.1.2.12.1.1 | ColumndsSwitchAtifIndex | read-only | current | It means that the ifIndex in MIB-II Interface of physical port.. |
| 1.3.6.1.4.1.6296.9.1.1.2.12.1.2 | ColumndsSwitchAtNetAddress | read-only | current | The IP address in ARP informations. |
| 1.3.6.1.4.1.6296.9.1.1.2.12.1.3 | ColumndsSwitchAtMacAddress | read-only | current | The physical address in ARP informations. |
| 1.3.6.1.4.1.6296.9.1.1.2.12.1.4 | ColumndsSwitchAtVID | read-only | current | The VLAN ID in ARP informations. |
| 1.3.6.1.4.1.6296.9.1.1.2.17 | NodedsNetworkTimeProtocolInfo | |||
| 1.3.6.1.4.1.6296.9.1.1.2.17.1 | ScalardsNTPMode | read-write | current | The mode of Network Time Protocol.. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.2 | ScalardsNTPBindAddressType | read-write | current | The bind-address Type of Network Time Protocol.. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.3 | ScalardsNTPBindAddress | read-write | current | The bind-address of Network Time Protocol.. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.10 | TabledsNTPServerTable | not-accessible | current | A list of dsNTPServerEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.10.1 | RowdsNTPServerEntry | not-accessible | current | An entry containing Network Time Protocol information. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.1 | ColumndsNTPServerIndex | read-write | current | A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.2 | ColumndsNTPServerName | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.3 | ColumndsNTPServerRowStatus | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.18 | NodedsDomainNameServiceInfo | |||
| 1.3.6.1.4.1.6296.9.1.1.2.18.1 | ScalardsDNSDomainName | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10 | TabledsDNSServerTable | not-accessible | current | A list of dsNTPServerEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10.1 | RowdsDNSServerEntry | not-accessible | current | An entry containing Network Time Protocol information. |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.1 | ColumndsDNSServerIndex | read-write | current | A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.2 | ColumndsDNSServerAddressType | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.3 | ColumndsDNSServerAddress | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.4 | ColumndsDNSServerRowStatus | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19 | NodedsSyslogInfo | |||
| 1.3.6.1.4.1.6296.9.1.1.2.19.1 | ScalardsSyslogBindAddressType | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.2 | ScalardsSyslogBindAddress | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.3 | ScalardsSyslogLocalCode | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10 | TabledsSyslogConfTable | not-accessible | current | A list of dsSyslogConfEntry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1 | RowdsSyslogConfEntry | not-accessible | current | An entry containing Syslog Configuration information. |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.1 | ColumndsSyslogConfIndex | read-write | current | A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.2 | ColumndsSyslogConfFacility | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.3 | ColumndsSyslogConfSeverity | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.4 | ColumndsSyslogConfTarget | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.5 | ColumndsSyslogConfStorage | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.6 | ColumndsSyslogConfRemoteAddrType | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.7 | ColumndsSyslogConfRemoteAddress | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.8 | ColumndsSyslogConfRowStatus | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.20 | TabledsTcTable | not-accessible | current | A list of dsTcEntrry entries. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1 | RowdsTcEntry | not-accessible | current | An entry containing dsTc information. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.1 | ColumndsTcNodeIndex | read-only | current | A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.2 | ColumndsTcIndex | read-only | current | A unique value, greater than zero, for each dsTc. It is recommended that values are assinged contiguously starting from 1. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.3 | ColumndsTcGuaranteedBandwidth | read-write | current | It means reserved bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.4 | ColumndsTcMaxBandwidth | read-write | current | It means maximum bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.5 | ColumndsTcWeight | read-write | current | It means weight limit of route applied to processing protocol. Weight limit can be from 1 to 1024. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.6 | ColumndsTcReset | read-write | current | Reset configuration about route applied to processing protocol |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.7 | ColumndsTcStatsCount | read-only | current | The total bits number of packets matching with a tc configuration, the counter value is a cumulative sum |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.8 | ColumndsTcStatsCount5Sec | read-only | current | The average bps of packets matching with dsTc configuration during 5 sec. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.9 | ColumndsTcStatsCount1Min | read-only | current | The average bps of packets matching with dsTc configuration during 1 minutes. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.10 | ColumndsTcStatsCount10Min | read-only | current | The average bps of packets matching with dsTc configuration during 10 minutes. |
| 1.3.6.1.4.1.6296.9.1.1.2.20.1.11 | ColumndsTcStatsCountReset | read-write | current | Reset Tc Statistics Counter Registers including tcStatsCount, tcStatsCount5Sec, tcStatsCount1Min and tcStatsCount10Min |
| 1.3.6.1.4.1.6296.9.1.1.2.25 | TabledsVdslLineConfProfileTable | not-accessible | current | This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1 | RowdsVdslLineConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist an… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.1 | ColumndsVdslLineConfProfileName | not-accessible | current | This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific va… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.4 | ColumndsVdslLineConfDownMaxSnrMgn | read-create | current | Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.5 | ColumndsVdslLineConfDownMinSnrMgn | read-create | current | Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.6 | ColumndsVdslLineConfDownTargetSnrMgn | read-create | current | Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve w… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.7 | ColumndsVdslLineConfUpMaxSnrMgn | read-create | current | Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.8 | ColumndsVdslLineConfUpMinSnrMgn | read-create | current | Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.9 | ColumndsVdslLineConfUpTargetSnrMgn | read-create | current | Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve wit… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.10 | ColumndsVdslLineConfDownMaxDataRate | read-create | current | Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derive… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.11 | ColumndsVdslLineConfDownMinDataRate | read-create | current | Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derive… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.12 | ColumndsVdslLineConfUpMaxDataRate | read-create | current | Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.13 | ColumndsVdslLineConfUpMinDataRate | read-create | current | Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.16 | ColumndsVdslLineConfDownMaxInterDelay | read-create | current | Specifies the maximum interleave delay for the downstream slow channel. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.17 | ColumndsVdslLineConfUpMaxInterDelay | read-create | current | Specifies the maximum interleave delay for the upstream slow channel. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.20 | ColumndsVdslLineConfHamband | read-write | current | dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(b… |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.21 | ColumndsVdslLineConfDownINP | read-write | current | Vdsl downstream INP . |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.22 | ColumndsVdslLineConfUpINP | read-write | current | Vdsl upstream INP. |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.23 | ColumndsVdslLineConfPBOLength | read-only | current | dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.24 | ColumndsVdslLineConfPSDMaskLevel | read-only | current | dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI … |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.25 | ColumndsVdslLineConfTCMAdmin | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.26 | ColumndsVdslLineConfUpboEnable | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.27 | ColumndsVdslLineConfChannel | read-write | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.25.1.28 | ColumndsVdslLineConfProfRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active… |
| 1.3.6.1.4.1.6296.9.1.1.2.26 | TabledsVdslCpeCountTable | not-accessible | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1 | RowdsVdslCpeCountEntry | not-accessible | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.1 | ColumndsVdslCpeCountFeFECB0 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.2 | ColumndsVdslCpeCountFeFECB1 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.3 | ColumndsVdslCpeCountFeCRCB0 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.4 | ColumndsVdslCpeCountFeCRCB1 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.5 | ColumndsVdslCpeCountFeFLOS | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.6 | ColumndsVdslCpeCountFeSEF | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.7 | ColumndsVdslCpeCountFeFECUnCrrB0 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.8 | ColumndsVdslCpeCountFeFECUnCrrB1 | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.9 | ColumndsVdslCpeCountTxFrameCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.10 | ColumndsVdslCpeCountRxFrameCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.11 | ColumndsVdslCpeCountTxCrcCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.12 | ColumndsVdslCpeCountRxCrcCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.26.1.13 | ColumndsVdslCpeCountDropFrameCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27 | TabledsVdslCoCountTable | not-accessible | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1 | RowdsVdslCoCountEntry | not-accessible | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.1 | ColumndsVdslCoCountRxFrame | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.2 | ColumndsVdslCoCountRxCrcErr | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.3 | ColumndsVdslCoCountRxDrop | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.4 | ColumndsVdslCoCountTxFrame | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.5 | ColumndsVdslCoCountTxDrop | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.27.1.6 | ColumndsVdslCoCountEnetCrcErrCnt | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.28 | TabledsVdslCpeInfoTable | not-accessible | current | This table contains information of the CPEs. |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1 | RowdsVdslCpeInfoEntry | not-accessible | current | Each entry consists of a list of parameters that represents the information of a CPE. |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1.1 | ColumndsVdslCpeVersion | read-only | current | CPE NOS version |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1.2 | ColumndsVdslCpeVendorId | read-only | current | CPE vendor ID |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1.3 | ColumndsVdslCpeVendorName | read-only | current | CPE vendor name |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1.4 | ColumndsVdslCpeModelName | read-only | current | CPE model name |
| 1.3.6.1.4.1.6296.9.1.1.2.28.1.5 | ColumndsVdslCpeSerialNumber | read-only | current | CPE serial number |