DASAN-TC
18 objects
This module defines textual conventions used throughout dasan enterprise mibs.
Imported Objects
| DASAN-SMI | dasanModules |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.12.1 | IdentitydasanTextualConventions | This module defines textual conventions used throughout dasan enterprise mibs. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CountryCode | OCTET STRING (SIZE (0 | 2)) | current | Represents a case-insensitive 2-letter country code taken from ISO-3166. Unrecognized countries are represented as empty string. |
| DasanAbsZeroBasedCounter32 | Gauge32 | current | This TC describes an object which counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, it locks at the maximum value of 4,294,… |
| DasanAlarmSeverity | INTEGER { cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6), info(7) } | current | Represents the perceived alarm severity associated with a service or safety affecting condition and/or event. These are based on ITU severities, except that info(7) is added. cleared(1) - Indicates a previous alarm cond… |
| DasanInetAddressMask | Unsigned32 (0..128) | current | Denotes a generic Internet subnet address mask. The Internet subnet address mask is represented as the number of contiguous 1-bit from MSB (most significant bit) of the Internet subnet address mask. A DasanInetAddressMa… |
| DasanIpProtocol | Integer32 ( 0..255 ) | current | IP protocol number range. |
| DasanLocationClass | INTEGER { chassis(1), shelf(2), slot(3), subSlot(4), port(5), subPort(6), channel(7), subChannel(8) } | current | An enumerated value which provides an indication of the general location type of a particular physical and/or logical interface. chassis - a system framework for mounting one or more shelves/slots/cards. shelf - a cabin… |
| DasanLocationSpecifier | OCTET STRING (SIZE (0..255)) | current | Use this TC to define objects that indicate the physical entity and/or logical interface location of a managed entity on a managed device. In SNMP, a standard mechanism for indicating the physical location of entities i… |
| DasanNetworkAddress | OCTET STRING | current | Represents a network layer address. The length and format of the address is protocol dependent as follows: ip 4 octets decnet 2 octets pup obsolete chaos 2 octets xns 10 octets first 4 octets are the net number last 6 o… |
| DasanNetworkProtocol | INTEGER { ip (1), decnet (2), pup (3), chaos (4), xns (5), x121 (6), appletalk (7), clns (8), lat (9), vines (10), cons (11), apollo (12), stun (13), novell (14), qllc (15), snapshot (16), atmIlmi (17), bstun (18), x25pvc (19), unknown (65535) } | current | Represents the different types of network layer protocols. |
| DasanPort | Integer32 ( 0..65535 ) | current | The TCP or UDP port number range. |
| DasanRowOperStatus | INTEGER { active(1), activeDependencies(2), inactiveDependency(3), missingDependency(4) } | current | Represents the operational status of an table entry. This textual convention allows explicitly representing the states of rows dependent on rows in other tables. active(1) - Indicates this entry's RowStatus is active an… |
| DasanSnapShotAbsCounter32 | Unsigned32 | current | This TC describes an object which stores a snap-shot value with the following semantics: objects of this type will take a snap-shot value from their associated DasanAbsZeroBasedCounter32 type objects on creation. |
| EntPhysicalIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of entPhysicalIndex. If non-zero, the object is an entPhysicalIndex. If zero, no appropriate entPhysicalIndex exists. Any additional semantics are object specific. |
| InterfaceIndexOrZero | Integer32 (0..2147483647) | current | Either the value 0, or the ifIndex value of an interface in the ifTable. |
| ModuleIndex | Integer32 | current | The value of this object identifies the module for which this entry contains management information. The value of this object for a particular module has the same value as the moduleIndex object. |
| PortIndex | Integer32 | current | The value of this object identifies the port for which this entry contains management information. The value of this object for a particular module has the same value as the portIndex object. |
| SAPType | Integer32 (0..254) | current | Service Access Point - is a term that denotes the means by which a user entity in layer n+1 accesses a service of a provider entity in layer n. |