DC-BGP-MIB
1295 objects
The MIB module for management of the DC-BGP product.
Imported Objects
| DC-MASTER-TC | AdminDistance BfdSessionStatus LongDisplayString PreAccessListListIndexOrZero VrfName |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.2.826.1 | IdentitybgpMib | The MIB module for management of the DC-BGP product. | ||
| 1.2.826.1.1 | NodebgpNotifications | |||
| 1.2.826.1.1.0 | NodebgpBaseNotifications | |||
| 1.2.826.1.1.0.1 | NotificationbgpTrapData | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap in the following circumstances: - When a BGP peer's FSM enters the established sta… | |
| 1.2.826.1.1.0.2 | NotificationbgpEntTrapData | current | Structure used to send trap data to the MIB Manager. If bgpRmEntTrapOperState is set to 'true', DC-BGP will send a trap when the local device enters RM operati… | |
| 1.2.826.1.1.0.3 | NotificationbgpPeerSessionEstablished | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when a BGP peer's FSM enters the established state, if bgpPeerTrapEstab is set to … | |
| 1.2.826.1.1.0.4 | NotificationbgpPeerSessionBackward | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when a BGP peer's FSM moves from a higher numbered state to a lower numbered state… | |
| 1.2.826.1.1.0.5 | NotificationbgpPeerAfiSafiMaxPrefix | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when the maximum numbers of prefixes is reached for a peer or, depending upon conf… | |
| 1.2.826.1.1.0.6 | NotificationbgpPeerAfiSafiPrefixThreshold | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when the prefix threshold is breached for peer or, depending upon configuration an… | |
| 1.2.826.1.1.0.7 | NotificationbgpEntOperStatusChange | current | Structure used to send trap data to the MIB Manager. If bgpRmEntTrapOperState is set to 'true', DC-BGP will send a trap when the local device enters RM operati… | |
| 1.2.826.1.1.0.8 | NotificationbgpEntRestartHelperChange | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when the local device changes Graceful Restart helper state for a peer, if bgpPeer… | |
| 1.2.826.1.1.0.9 | NotificationbgpEntRibSizeWarnTrap | current | Structure used to send trap data to the MIB Manager. Sent when the total number of routes in DC-BGP's Adj-RIBs-In exceeds or drops back below the configured va… | |
| 1.2.826.1.1.0.10 | NotificationbgpPeerAfiSafiMaxPrefixClear | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when the number of prefixes learned from a peer or, depending upon configuration, … | |
| 1.2.826.1.1.0.11 | NotificationbgpPeerAfiSafiPrfxThrshldClear | current | Structure used to send trap data to the MIB Manager. DC-BGP will send a trap when the number of prefixes learned from a peer or, depending upon configuration, … | |
| 1.2.826.1.2 | NodebgpRm | |||
| 1.2.826.1.2.1 | TablebgpRmEntTable | not-accessible | current | Each entry in this table represents a RIB Manager entity. Only some fields in an entry can be changed while the admin status is up. |
| 1.2.826.1.2.1.1 | RowbgpRmEntEntry | not-accessible | current | Each entry represents a RIB Manager entity. |
| 1.2.826.1.2.1.1.1 | ColumnbgpRmEntIndex | not-accessible | current | Identifies a RIB Manager entity. |
| 1.2.826.1.2.1.1.2 | ColumnbgpRmEntRowStatus | read-create | current | The row status for this RIB Manager Entity Table entry, used to create and destroy table entries. |
| 1.2.826.1.2.1.1.3 | ColumnbgpRmEntAdminStatus | read-create | current | The administrative status of this RIB Manager entity, used to activate and deactivate RM. |
| 1.2.826.1.2.1.1.4 | ColumnbgpRmEntOperStatus | read-only | current | The current operational status of this RIB Manager entity. |
| 1.2.826.1.2.1.1.5 | ColumnbgpRmEntAsSize | read-create | current | The size of AS numbers. The semantics of this are determined as per RFC 4893. It is equivalent to the Base Scalar bgpM2AsSize. This field can only be changed w… |
| 1.2.826.1.2.1.1.6 | ColumnbgpRmEntLocalAs | read-create | current | The local autonomous system number. For a router not in a confederation, it is equivalent to the Base Scalar bgpM2LocalAs. For a router in a confederation, it … |
| 1.2.826.1.2.1.1.7 | ColumnbgpRmEntConfederationId | read-create | current | The confederation identifier. This is an externally visible autonomous system number that identifies the confederation as a whole. This field is only valid if … |
| 1.2.826.1.2.1.1.8 | ColumnbgpRmEntLocalIdentifier | read-create | current | The BGP Identifier of the local system. This is a generic identifier and not necessarily an IP address. This field can only be changed when the Admin Status is… |
| 1.2.826.1.2.1.1.9 | ColumnbgpRmEntClusterId | read-create | current | The configured Cluster-ID of the local router. A value of 0.0.0.0 indicates the absence of this value. This field can only be changed when the Admin Status is … |
| 1.2.826.1.2.1.1.10 | ColumnbgpRmEntIpv4MultiSupport | read-create | obsolete | This value is TRUE if Multicast IPv4 is supported. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.11 | ColumnbgpRmEntVpnIpv4Support | read-create | obsolete | This value is TRUE if VPN-IPv4 addresses for MPLS/BGP VPNs are supported. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.12 | ColumnbgpRmEntFlapDeltat | read-create | current | This is the time granularity used to perform all decay computations. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.13 | ColumnbgpRmEntFlapReusemax | read-create | current | This is the time corresponding to the last reuse list. This is the maximum value of T-hold that may be configured in the bgpFlapConfigTable table. This field c… |
| 1.2.826.1.2.1.1.14 | ColumnbgpRmEntFlapReusesize | read-create | current | This is the number of reuse lists. This field, together with bgpRmEntFlapReusemax, fixes the time interval that each reuse list covers. This field can only be … |
| 1.2.826.1.2.1.1.15 | ColumnbgpRmEntFlapReusearray | read-create | current | This is the size of the reuse index arrays. This size determines the accuracy with which suppressed routes can be placed within the set of reuse lists when sup… |
| 1.2.826.1.2.1.1.16 | ColumnbgpRmEntFlapFreemax | read-create | current | This is the maximum length of time for which a penalty against a route this is not available shall be remebered, across all configurations in the bgpFlapConfig… |
| 1.2.826.1.2.1.1.17 | ColumnbgpRmEntNoRefresh | read-create | current | This is set to TRUE to prevent automatic route refresh when a policy update has occurred. This field allows several policy updates to be followed by a single r… |
| 1.2.826.1.2.1.1.18 | ColumnbgpRmEntDefLocalPref | read-create | current | The default value used for the local preference if one is not set up through the filtering process. This field can only be changed when the Admin Status is dow… |
| 1.2.826.1.2.1.1.19 | ColumnbgpRmEntAlwaysCompMed | read-create | current | This is set to TRUE to always compare the MULTI-EXIT-DESC route attribute in the BGP decision process, even if the routes in consideration were learned from di… |
| 1.2.826.1.2.1.1.20 | ColumnbgpRmEntAggregateMed | read-create | current | If FALSE, then routes will only be aggregated if they have matching MULTI-EXIT-DISC route attributes. This means that operation is in strict compliance with th… |
| 1.2.826.1.2.1.1.21 | ColumnbgpRmEntDeterministicMed | read-create | current | This is set to TRUE to enable deterministic MULTI-EXIT-DESC processing. If set to FALSE, the selection of routes by the BGP decision process is non-determinist… |
| 1.2.826.1.2.1.1.22 | ColumnbgpRmEntNhrJoinStatus | read-only | obsolete | The status of the NHR Interface join. |
| 1.2.826.1.2.1.1.23 | ColumnbgpRmEntNhrEntIndex | read-create | obsolete | Identifies the NHR Interface routing stub entity. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.24 | ColumnbgpRmEntI3JoinStatus | read-only | current | The status of the I3 join. |
| 1.2.826.1.2.1.1.25 | ColumnbgpRmEntI3EntIndex | read-create | current | Identifies the I3 Interface routing stub entity. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.26 | ColumnbgpRmEntPauseThreshold | read-create | current | The RM component can be configured to limit the amount of work that it carries out in a single cycle of the N-BASE scheduler. The component maintains a work pe… |
| 1.2.826.1.2.1.1.27 | ColumnbgpRmEntMaxIBgpEcmpRoutes | read-create | current | The maximum number of Equal Cost BGP next-hops stored by DC-BGP for a route learnt via internal BGP. This is also the maximum number of network next-hops sent … |
| 1.2.826.1.2.1.1.28 | ColumnbgpRmEntMaxEBgpEcmpRoutes | read-create | current | The maximum number of Equal Cost BGP next-hops stored by DC-BGP for a route learnt via external BGP. This is also the maximum number of network next-hops sent … |
| 1.2.826.1.2.1.1.29 | ColumnbgpRmEntRestartSupported | read-create | current | Whether DC-BGP RIB Manager should execute graceful restart procedures in the event of either a peer failure or its own failure. This field can only be changed … |
| 1.2.826.1.2.1.1.30 | ColumnbgpRmEntMaxRestartTime | read-create | current | This is the maximum time (in seconds) to wait for a graceful restart capable peer to come back after a peer restart or peer session failure. This value is used… |
| 1.2.826.1.2.1.1.31 | ColumnbgpRmEntRecoveryTime | read-create | current | The interval which DC-BGP should advertize to its peers as the estimated time (in seconds) it will take for the BGP session to be re-established after a local … |
| 1.2.826.1.2.1.1.32 | ColumnbgpRmEntDoGracefulRestart | read-create | current | Indicates whether DC-BGP RIB Manager should execute graceful restart procedures when it is restarted. Executing graceful restart procedures ensures that routin… |
| 1.2.826.1.2.1.1.33 | ColumnbgpRmEntIpv4UniFwdPrsrvd | read-create | obsolete | This value should be set to TRUE if Unicast IPv4 forwarding state has been preserved over a restart, and the value of the bgpRmEntRestartSupported field is set… |
| 1.2.826.1.2.1.1.34 | ColumnbgpRmEntIpv4MultiFwdPrsrvd | read-create | obsolete | This value should be set to TRUE if Multicast IPv4 forwarding state has been preserved over a restart, and the value of the bgpRmEntRestartSupported field is s… |
| 1.2.826.1.2.1.1.35 | ColumnbgpRmEntVpnIpv4FwdPrsrvd | read-create | obsolete | This value should be set to TRUE if VPN-IPv4 forwarding state has been preserved over a restart, and the value of the bgpRmEntRestartSupported field is set to … |
| 1.2.826.1.2.1.1.36 | ColumnbgpRmEntIpv4ArinhJoinStatus | read-only | current | The status of the ARI Interface slave join for querying IPv4 next hops. This is equivalent to the bgpRmArinhJoinStatus field within the bgpRmArinhJoinTable for… |
| 1.2.826.1.2.1.1.37 | ColumnbgpRmEntIpv4ArinhEntIndex | read-only | current | Identifies the IPv4 ARI provider entity. This is equivalent to the bgpRmArinhEntIndex field within the bgpRmArinhJoinTable for the IPv4 Unicast table entry. |
| 1.2.826.1.2.1.1.38 | ColumnbgpRmEntIpv6ArinhJoinStatus | read-only | current | The status of the ARI Interface slave join for querying IPv6 next hops. This is equivalent to the bgpRmArinhJoinStatus field within the bgpRmArinhJoinTable for… |
| 1.2.826.1.2.1.1.39 | ColumnbgpRmEntIpv6ArinhEntIndex | read-only | current | Identifies the IPv6 ARI provider entity. This is equivalent to the bgpRmArinhEntIndex field within the bgpRmArinhJoinTable for the IPv6 Unicast table entry. |
| 1.2.826.1.2.1.1.40 | ColumnbgpRmEntSupportIpv6 | read-create | current | Indicates whether this instance supports connections to BGP peers with IPv6 addresses, and understands IPv6 next hop addresses. This field must not be set to T… |
| 1.2.826.1.2.1.1.41 | ColumnbgpRmEntStrictConfed | read-create | current | When set to TRUE DC-BGP insists upon strict adherence by peers to the protocol specification, rejecting AS-Path attributes with erroneous AS-Confed segments. W… |
| 1.2.826.1.2.1.1.42 | ColumnbgpRmEntOrfSupported | read-create | current | Whether DC-BGP RIB Manager should support Cooperative Route Filtering (commonly referred to as Outbound Route Filtering or ORF). This field can only be changed… |
| 1.2.826.1.2.1.1.43 | ColumnbgpRmEntCiscoPrefixSupported | read-create | current | Whether DC-BGP RIB Manager should advertise support for the proprietary Cisco ORF prefix type. This field can only be changed when the Admin Status is down and… |
| 1.2.826.1.2.1.1.44 | ColumnbgpRmEntSelectDeferTime | read-create | current | The maximum time (in seconds) following local restart that DC-BGP will wait before performing route selection. The value specified should be large enough to pr… |
| 1.2.826.1.2.1.1.45 | ColumnbgpRmEntStalePathTime | read-create | current | The maximum time (in seconds) that DC-BGP will wait following a peer restart or peer session failure before removing stale routes from that peer. The value mus… |
| 1.2.826.1.2.1.1.46 | ColumnbgpRmEntNonPersistentAros | read-create | obsolete | This field is now retired. |
| 1.2.826.1.2.1.1.47 | ColumnbgpRmEntAroRouteThreshold | read-create | obsolete | This field is now retired. |
| 1.2.826.1.2.1.1.48 | ColumnbgpRmEntMaxActiveAroGroups | read-create | obsolete | This field is now retired. |
| 1.2.826.1.2.1.1.49 | ColumnbgpRmEntNumArosInGroup | read-create | obsolete | This field is now retired. |
| 1.2.826.1.2.1.1.50 | ColumnbgpRmEntNumAroRoutes | read-only | current | The total number of Adj-RIB-Out routes currently allocated across all Adj-RIBs-Out. When additional paths are enabled, routes with different path ID values cou… |
| 1.2.826.1.2.1.1.51 | ColumnbgpRmEntPeakNumAroRoutes | read-only | current | The peak number of Adj-RIB-Out routes that have been allocated at any one time. When additional paths are enabled, routes with different path ID values count a… |
| 1.2.826.1.2.1.1.52 | ColumnbgpRmEntClearStats | read-create | current | Set to true to reset the bgpRmEntPeakNumAroRoutes field and to clear the bgpRmAfiSafiTotNumPrefixAllocs, bgpRmAfiSafiTotNumRouteAllocs, bgpRmAfiSafiTotNumPrefi… |
| 1.2.826.1.2.1.1.53 | ColumnbgpRmEntFastExtFallover | read-create | current | Indicates whether DC-BGP is configured to perform fast external fallover. When bgpRmEntFastExtFallover is 'true', BGP sessions to directly connected EBGP peers… |
| 1.2.826.1.2.1.1.54 | ColumnbgpRmEntRemainDelayTime | read-only | current | The maximum time remaining until route selection takes place following a restart, in hundredths of a second. This is the time left until the timer with duratio… |
| 1.2.826.1.2.1.1.55 | ColumnbgpRmEntPathAttrs | read-only | current | The total number of path attributes present. |
| 1.2.826.1.2.1.1.56 | ColumnbgpRmEntAggSplitHorizon | read-create | current | Indicates whether DC-BGP should apply split-horizon processing when advertising locally generated aggregate routes to a peer. If set to TRUE, locally generated… |
| 1.2.826.1.2.1.1.57 | ColumnbgpRmEntAggAdvSuppr | read-create | current | This field governs the behaviour of DC-BGP when a locally-generated, summary aggregate route cannot be advertised to a peer. If set to TRUE, DC-BGP should atte… |
| 1.2.826.1.2.1.1.58 | ColumnbgpRmEntUpdateGroups | read-create | current | This field indicates that DC-BGP should combine peers into update groups. This means that peers which have similar configuration and export policies for a part… |
| 1.2.826.1.2.1.1.59 | ColumnbgpRmEntPhase3DelayTime | read-create | current | The time in seconds after the number of Established BGP sessions changes from zero to one in which phase 3 work will be postponed if there is still phase 1 or … |
| 1.2.826.1.2.1.1.60 | ColumnbgpRmEntTrapOperState | read-create | current | This value indicates whether or not the Oper State change trap is used. If in use DC-BGP will send a trap whenever the operational status of the RM Entity chan… |
| 1.2.826.1.2.1.1.61 | ColumnbgpRmEntMaxASLimit | read-create | current | The maximum number of AS numbers in the AS_PATH attribute that is allowed in routes learned from peers. Routes whose AS_PATH has more AS numbers than this limi… |
| 1.2.826.1.2.1.1.62 | ColumnbgpRmEntRestartTimeLeft | read-only | current | Remaining time before BGP graceful restart times out. |
| 1.2.826.1.2.1.1.63 | ColumnbgpRmEntRestartExitReason | read-only | current | Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a res… |
| 1.2.826.1.2.1.1.64 | ColumnbgpRmEntAsPathMultipathRelax | read-create | current | This field indicates whether BGP routes with different AS_PATHs can be used as equal cost routes. If this is FALSE then DC-BGP only treats two BGP routes as eq… |
| 1.2.826.1.2.1.1.65 | ColumnbgpRmEntAsPathIgnore | read-create | current | This field indicates whether DC-BGP ignores AS path length when determining the preferred route from two BGP routes. If this is FALSE then DC-BGP treats the BG… |
| 1.2.826.1.2.1.1.66 | ColumnbgpRmEntPreferExistingRoute | read-create | current | This field indicates how DC-BGP handles a tie when determining the preferred route between two routes of essentially equal cost received from BGP peers externa… |
| 1.2.826.1.2.1.1.67 | ColumnbgpRmEntMedMissingAsWorst | read-create | current | This field indicates whether DC-BGP treats the multi-exit discriminator (MED) for a BGP route received with no MED as having the worst possible priority value.… |
| 1.2.826.1.2.1.1.68 | ColumnbgpRmEntMedConfed | read-create | current | This field indicates whether DC-BGP carries out multi-exit discriminator (MED) comparison to determine the preferred route from two BGP routes originating from… |
| 1.2.826.1.2.1.1.69 | ColumnbgpRmEntDynPeerRestartTime | read-create | current | The time to wait (in seconds) for dynamic peers to reconnect following local restart. DC-BGP will wait at least this time following local restart before perfor… |
| 1.2.826.1.2.1.1.70 | ColumnbgpRmEntCheckFirstAsNum | read-create | current | Whether or not the first AS number in the AS_PATH attribute in an UPDATE received from a peer should be checked to make sure it is the same as the AS number of… |
| 1.2.826.1.2.1.1.71 | ColumnbgpRmEntRibSizeWarning | read-create | current | Limit on the total number of routes across all of DC-BGP's Adj-RIBs-IN across all <AFI, SAFI>. (In other words, the count of all locally-redistributed routes a… |
| 1.2.826.1.2.1.1.72 | ColumnbgpRmEntRtiName | read-write | current | This value describes routing instance name. This value is passed, while configuring the routing instance. |
| 1.2.826.1.2.1.1.73 | ColumnbgpRmEntLmgrJoinStatus | read-only | current | The status of the LMGR join. |
| 1.2.826.1.2.1.1.74 | ColumnbgpRmEntLmgrEntIndex | read-write | current | Identifies the LMGR entity. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.2.1.1.75 | ColumnbgpRmEntDebug | read-write | current | This field is used to set debug flags of BGP Instance. |
| 1.2.826.1.2.1.1.76 | ColumnbgpRmEntLevel | read-write | current | This field is used to set debug level of BGP Instance. |
| 1.2.826.1.2.1.1.77 | ColumnbgpRmEntAllFlagsEnabled | read-write | current | This field is used to determine all flags enabled. |
| 1.2.826.1.2.1.1.78 | ColumnbgpRmEntRxTxFlagsEnabled | read-write | current | This field is used to determine rx/tx flags enabled. |
| 1.2.826.1.2.1.1.79 | ColumnbgpRmEntProcId | read-only | current | This field is used to get BGP RM entity processId. |
| 1.2.826.1.2.1.1.80 | ColumnbgpRmEntRestartMultiplier | read-write | current | This field is used to set multiplier for all configured graceful restart time except bgpRmEntDynPeerRestartTime. |
| 1.2.826.1.2.1.1.81 | ColumnbgpRmEntEnableAlarms | read-write | current | This field is used to enable alarms. |
| 1.2.826.1.2.1.1.82 | ColumnbgpRmEntVrfName | read-create | current | The text name of the VRF in which this entity instance is running. If this field is a zero-length string then it is assumed that this entity instance is runnin… |
| 1.2.826.1.2.1.1.83 | ColumnbgpRmEntDynPeerLimit | read-create | current | Limit on the total number of dynamic peers that can be accepted. A value of zero (0) means no limit. This field can be changed while DC-BGP is active. If this … |
| 1.2.826.1.2.1.1.84 | ColumnbgpRmEntTableVersion | read-only | current | The table version number of the Loc-RIB. Initialized to 1 when BGP starts or restarts, and is incremented every time the Loc-RIB is recalculated. |
| 1.2.826.1.2.1.1.85 | ColumnbgpRmEntHelperOnly | read-create | current | If graceful restart is supported (bgpRmEntRestartSupported is True), this field controls whether DC-BGP will act as a helper node only - its effect is to force… |
| 1.2.826.1.2.1.1.86 | ColumnbgpRmEntInterClientReflEnabled | read-create | current | Whether DC-BGP supports acting as a route reflector between route reflector clients. Routes will not be reflected between two peers that are configured to be r… |
| 1.2.826.1.2.1.1.87 | ColumnbgpRmEntConfigRtRefresh | read-create | current | Set this field to 'true' to trigger a route refresh for all peers. Peers that do not support route refresh will have their sessions toggled. Reading the value … |
| 1.2.826.1.2.1.1.88 | ColumnbgpRmEntSupportIpv4 | read-create | current | Indicates whether this instance supports connections to BGP peers with IPv4 addresses, and understands IPv4 next hop addresses. This field can be changed at an… |
| 1.2.826.1.2.1.1.89 | ColumnbgpRmEntUseHalProgramming | read-create | current | Indicates whether DC-BGP is being used in a system integrated with the HAL components. When this field is set to true, DC-BGP will request specific types of ro… |
| 1.2.826.1.2.1.1.90 | ColumnbgpRmEntTenantId | read-write | current | This field is used to set tenant id. |
| 1.2.826.1.2.1.1.91 | ColumnbgpRmEntStaleGr | read-write | current | This field is used to change the behavior when route delete comes, stale entry does not get deleted. |
| 1.2.826.1.2.1.1.92 | ColumnbgpRmEntSlaCommunity | read-write | current | This field is used to attach specified extended community to all redistributed routes. |
| 1.2.826.1.2.1.1.93 | ColumnbgpRmEntSooAuto | read-write | current | This field is used to attach auto-generated extended community to all redistributed local host routes. |
| 1.2.826.1.2.1.1.94 | ColumnbgpRmEntSiteId | read-write | current | This field is used to specify site-id for this router in sdwan case. Else set to 0. |
| 1.2.826.1.2.1.1.95 | ColumnbgpRmEntCliId | read-write | current | This field is used to set bgp cli id. |
| 1.2.826.1.2.1.1.98 | ColumnbgpRmEntTenantName | read-write | current | This value describes org name. |
| 1.2.826.1.2.1.1.99 | ColumnbgpRmEntVPSiteInfoLocal | read-write | current | This field is used to include local site information (tenant-name(s), wan-ip(s), cpu-load, mem-load, site-identification) in versa-private routes. |
| 1.2.826.1.2.1.1.100 | ColumnbgpRmEntVPSiteInfoRemote | read-write | current | This field is used to include remote site information (tenant-name(s), wan-ip(s), cpu-load, mem-load, site-identification) in versa-private routes. |
| 1.2.826.1.2.1.1.101 | ColumnbgpRmEntCommOldFormat | read-write | current | If set to 'true' the set and match communities in the route maps will be processed in the old format i.e. as a 4 byte number. |
| 1.2.826.1.2.2 | TablebgpRmAfiSafiTable | not-accessible | current | Table of per-<AFI, SAFI> configuration information. |
| 1.2.826.1.2.2.1 | RowbgpRmAfiSafiEntry | not-accessible | current | Entry containing information about support for an <AFI, SAFI>. |
| 1.2.826.1.2.2.1.2 | ColumnbgpRmAfiSafiAfi | not-accessible | current | The AFI index into the <AFI, SAFI> table. |
| 1.2.826.1.2.2.1.3 | ColumnbgpRmAfiSafiSafi | not-accessible | current | The SAFI index into the <AFI, SAFI> table. |
| 1.2.826.1.2.2.1.4 | ColumnbgpRmAfiSafiAdminStatus | read-create | current | The administrative status for this <AFI, SAFI>. The IPv4 Unicast address family defaults to admin-up. The default for other address families is to be admin-dow… |
| 1.2.826.1.2.2.1.5 | ColumnbgpRmAfiSafiStateKept | read-create | current | This value is used only if Graceful Restart procedures are supported (in other words if bgpRmEntRestartSupported is true). If set to true at the point at which… |
| 1.2.826.1.2.2.1.6 | ColumnbgpRmAfiSafiAfmRequired | read-create | current | If this flag is set, DC-BGP will require an active AFM join to be present before advertising NLRI of this <AFI, SAFI> to peers. This ensures that routes are no… |
| 1.2.826.1.2.2.1.7 | ColumnbgpRmAfiSafiLocRibBlocked | read-only | current | This flag is set if the Loc-RIB for this <AFI, SAFI> is currently blocked, in which case DC-BGP will not advertise any routes of this <AFI, SAFI> to peers. A L… |
| 1.2.826.1.2.2.1.8 | ColumnbgpRmAfiSafiAdvertiseInactive | read-create | current | If set to 'true', the best route will be advertised to peers, whether or not the route has been added to the forwarding table by the AFM. If set to 'false', th… |
| 1.2.826.1.2.2.1.9 | ColumnbgpRmAfiSafiUserData | read-only | current | User data for this BGP AFI SAFI entry. |
| 1.2.826.1.2.2.1.10 | ColumnbgpRmAfiSafiIbgpPrefixes | read-only | current | The total number of IBGP routes received for this <AFI, SAFI>. When additional paths are enabled, routes with different path ID values count as different prefi… |
| 1.2.826.1.2.2.1.11 | ColumnbgpRmAfiSafiEbgpPrefixes | read-only | current | The total number of EBGP routes received for this <AFI, SAFI>. When additional paths are enabled, routes with different path ID values count as different prefi… |
| 1.2.826.1.2.2.1.12 | ColumnbgpRmAfiSafiRedistPrefixes | read-only | current | The total number of routes redistributed for this <AFI, SAFI>. When additional paths are enabled, routes with different path ID values count as different prefi… |
| 1.2.826.1.2.2.1.13 | ColumnbgpRmAfiSafiInPrfxes | read-only | current | The number of prefixes received for this <AFI, SAFI> that are stored in an Adj-RIB-In. When additional paths are enabled, routes with different path ID values … |
| 1.2.826.1.2.2.1.14 | ColumnbgpRmAfiSafiInPrfxesAccepted | read-only | current | The number of prefixes received for this <AFI, SAFI> that are installed in an Adj-RIB-In and are eligible to become active in the Loc-Rib. When additional path… |
| 1.2.826.1.2.2.1.15 | ColumnbgpRmAfiSafiInPrfxesRejected | read-only | current | The number of prefixes received for this <AFI, SAFI> that are installed in an Adj-RIB-In and are NOT eligible to become active in the Loc-Rib. When additional … |
| 1.2.826.1.2.2.1.16 | ColumnbgpRmAfiSafiOutPrfxes | read-only | current | The number of prefixes for this <AFI, SAFI> that are installed in an Adj-RIB-Out. When additional paths are enabled, routes with different path ID values count… |
| 1.2.826.1.2.2.1.17 | ColumnbgpRmAfiSafiOutPrfxesAdvertised | read-only | current | The number of advertised prefixes for this <AFI, SAFI> currently associated with any peer. When additional paths are enabled, routes with different path ID val… |
| 1.2.826.1.2.2.1.18 | ColumnbgpRmAfiSafiInPrfxesActive | read-only | current | The number of prefixes received for this <AFI, SAFI> that are installed in the Adj-RIB-In and are active in the Loc-Rib. When additional paths are enabled, rou… |
| 1.2.826.1.2.2.1.19 | ColumnbgpRmAfiSafiInPrfxesFlapped | read-only | current | The number of prefixes received for this <AFI, SAFI> that are installed in the Adj-RIB-In and for which RIB Manager is tracking a route flap damping penalty. W… |
| 1.2.826.1.2.2.1.20 | ColumnbgpRmAfiSafiInPrfxesFlapSuppr | read-only | current | The number of prefixes received for this <AFI, SAFI> that are installed in the Adj-RIB-In and that are suppressed as a result of route flapping. When additiona… |
| 1.2.826.1.2.2.1.21 | ColumnbgpRmAfiSafiInPrfxesFlapHistory | read-only | current | The number of prefixes received for this <AFI, SAFI> that are not currently in the Adj-RIB-In, but which have an associated route flap damping penalty. When ad… |
| 1.2.826.1.2.2.1.22 | ColumnbgpRmAfiSafiDefaultImportRule | read-create | current | The default behavior that BGP applies when it receives a route of this address family for which an import policy has not been configured. |
| 1.2.826.1.2.2.1.23 | ColumnbgpRmAfiSafiInPrfxesDeniedByPol | read-only | current | The number of prefixes received for this <AFI, SAFI> that are stored, but failed import policy and so have not been installed in the Adj-RIB-In. When additiona… |
| 1.2.826.1.2.2.1.24 | ColumnbgpRmAfiSafiNumLocRibRoutes | read-only | current | The number of routes installed in the Loc-RIB for this <AFI, SAFI>. When additional paths are enabled, routes with different path ID values count as different … |
| 1.2.826.1.2.2.1.25 | ColumnbgpRmAfiSafiNextHopSafi | read-create | current | Specifies the SAFI that will be used to resolve BGP next hops for routes with this <AFI, SAFI>. This may be set to none, unicast or multicast. If set to none, … |
| 1.2.826.1.2.2.1.26 | ColumnbgpRmAfiSafiNumLocRibBestRoutes | read-only | current | The number of routes installed in the Loc-RIB as 'best' routes for this <AFI, SAFI>. This does not include additional paths or ECMP routes. |
| 1.2.826.1.2.2.1.27 | ColumnbgpRmAfiSafiAddPathCapCfg | read-create | current | The default BGP additional path capability for I-BGP sessions. This can be overridden at the BGP peer AFI/SAFI or peer group AFI/SAFI level (bgpPeerAfiSafiAddP… |
| 1.2.826.1.2.2.1.28 | ColumnbgpRmAfiSafiAddPathBestN | read-create | current | The number of best paths to calculate as candidate BGP additional paths. DC-BGP calculates the N best paths for each destination as candidates for advertisemen… |
| 1.2.826.1.2.2.1.29 | ColumnbgpRmAfiSafiCheckMartians | read-create | current | If this flag is set to true, DC-BGP will check received routes for Martian prefixes. |
| 1.2.826.1.2.2.1.30 | ColumnbgpRmAfiSafiDefaultMetric | read-create | current | This field defines the default metric for routes redistributed into BGP. Any route redistributed into BGP without a MED value has its MED value set to this val… |
| 1.2.826.1.2.2.1.31 | ColumnbgpRmAfiSafiFlapConfigIndex | read-create | current | The index of the route flap configuration table entry for this AFI/SAFI, or zero if route flap dampening is not required. This route flap configuration applies… |
| 1.2.826.1.2.2.1.32 | ColumnbgpRmAfiSafiFlapConfigMap | read-create | current | The index of the Route Map used for route flap configuration for this AFI/SAFI, or zero if none. If a route map is used for route flap configuration then the r… |
| 1.2.826.1.2.2.1.33 | ColumnbgpRmAfiSafiIGPMetricIgnore | read-create | current | Determines whether DC-BGP considers the IGP metric when comparing routes. The decision process, as defined by RFC 4271, requires that this is set to false. Set… |
| 1.2.826.1.2.2.1.34 | ColumnbgpRmAfiSafiNumLocRibNextHops | read-only | current | The total number of next hops for all routes installed in the Loc-RIB for this <AFI, SAFI>. |
| 1.2.826.1.2.2.1.35 | ColumnbgpRmAfiSafiNumLocRibECMPRoutes | read-only | current | The number of routes installed in the Loc-RIB for this <AFI, SAFI> for which there are multiple ECMP next hops. |
| 1.2.826.1.2.2.1.36 | ColumnbgpRmAfiSafiTotNumPrefixAllocs | read-only | current | The total number of memory allocations for prefixes (NLRIs) that have been made ever for this <AFI, SAFI>. If the route to a prefix flaps so that memory is fre… |
| 1.2.826.1.2.2.1.37 | ColumnbgpRmAfiSafiTotNumRouteAllocs | read-only | current | The total number of memory allocations for routes that have been made ever for this <AFI, SAFI>. If a route flaps so that memory is freed and re-allocated for … |
| 1.2.826.1.2.2.1.38 | ColumnbgpRmAfiSafiTotNumPrefixFrees | read-only | current | The total number of memory frees for prefixes (NLRIs) that have been done ever for this <AFI, SAFI>. This counter can be reset by setting the bgpRmEntClearStat… |
| 1.2.826.1.2.2.1.39 | ColumnbgpRmAfiSafiTotNumRouteFrees | read-only | current | The total number of memory frees for routes that have been done ever for this <AFI, SAFI>. This counter can be reset by setting the bgpRmEntClearStats field to… |
| 1.2.826.1.2.2.1.40 | ColumnbgpRmAfiSafiMaExtCommList | read-create | current | Identifies an extended community list that can be used to filter routes based on their extended communities (including route-targets). This filter is applied b… |
| 1.2.826.1.2.2.1.41 | ColumnbgpRmAfiSafiMaxIBgpEcmpRoutes | read-create | current | The maximum number of Equal Cost BGP next-hops stored by DC-BGP for a route of this <AFI, SAFI> learnt via internal BGP. This is also the maximum number of net… |
| 1.2.826.1.2.2.1.42 | ColumnbgpRmAfiSafiMaxEBgpEcmpRoutes | read-create | current | The maximum number of Equal Cost BGP next-hops stored by DC-BGP for a route of this <AFI, SAFI> learnt via external BGP. This is also the maximum number of net… |
| 1.2.826.1.2.2.1.43 | ColumnbgpRmAfiSafiInstallBestNPaths | read-create | current | The number of paths to install into the AFM for each destination for a route of this <AFI, SAFI>. This is used to determine how many protecting paths are insta… |
| 1.2.826.1.3 | NodebgpPeer | |||
| 1.2.826.1.3.1 | NodebgpPeerData | |||
| 1.2.826.1.3.1.1 | TablebgpPeerTable | not-accessible | current | BGP peer configuration table. This table allows a user to configure individual BGP peers. This table is a configuration table - all status, statistics and cont… |
| 1.2.826.1.3.1.1.1 | RowbgpPeerEntry | not-accessible | current | Entry containing information about the connection with a BGP peer. |
| 1.2.826.1.3.1.1.1.2 | ColumnbgpPeerIdentifier | read-only | current | This field is now deprecated - use bgpPeerStatusIdentifier instead. The BGP Identifier of this entry's BGP peer. This entry is zero unless the bgpPeerState is … |
| 1.2.826.1.3.1.1.1.3 | ColumnbgpPeerState | read-only | current | This field is now deprecated - use bgpPeerStatusState instead. The BGP peer's FSM state. |
| 1.2.826.1.3.1.1.1.4 | ColumnbgpPeerRowStatus | read-create | current | The row status for this BGP peer table entry, used to create and destroy table entries. |
| 1.2.826.1.3.1.1.1.5 | ColumnbgpPeerAdminStatus | read-create | current | The desired state of the BGP connection. A transition from 'up' to 'down' will cause the BGP Stop Event to be generated. A transition from 'down' to 'up' will … |
| 1.2.826.1.3.1.1.1.6 | ColumnbgpPeerOperStatus | read-only | current | The current operational status of this peer. This usually reflects the desired AdminStatus, but can contain transitional values and failures. |
| 1.2.826.1.3.1.1.1.7 | ColumnbgpPeerLocalAddrType | not-accessible | current | The address family of the local address configured for the peering session. Valid values are: unknown(0), ipv4(1) and ipv6(2). A type of ipv6 is only accepted … |
| 1.2.826.1.3.1.1.1.8 | ColumnbgpPeerLocalAddr | not-accessible | current | The local address configured for the peering session, or a zero length address if not specified. For outbound connections, if a local address is specified then… |
| 1.2.826.1.3.1.1.1.9 | ColumnbgpPeerLocalPort | not-accessible | current | The local port configured for the peering session, or zero if not specified. For outbound connections, if a local port is specified then DC-BGP will bind to th… |
| 1.2.826.1.3.1.1.1.10 | ColumnbgpPeerLocalNm | read-create | current | The entity index of the Neighbor Manager for peering sessions with this peer. This field can only be changed when the row is not active. This field has no corr… |
| 1.2.826.1.3.1.1.1.11 | ColumnbgpPeerRemoteAddrType | not-accessible | current | The address family of the remote address for the peering session. Valid values are: unknown(0), ipv4(1) and ipv6(2). A type of ipv6 is only accepted if bgpRmEn… |
| 1.2.826.1.3.1.1.1.12 | ColumnbgpPeerRemoteAddr | not-accessible | current | The remote address for the peering session, or a zero length field if not specified in which case this peer is identified only by interface by bgpPeerLocalAddr… |
| 1.2.826.1.3.1.1.1.13 | ColumnbgpPeerRemotePort | not-accessible | current | The remote port configured for the peering session, or zero if not specified. For outbound connections, if a remote port is specified then DC-BGP will connect … |
| 1.2.826.1.3.1.1.1.14 | ColumnbgpPeerRemoteAs | read-create | current | The remote autonomous system number. This is ignored for peers that are identified by interface only. This field can be changed at any time. However, if the fi… |
| 1.2.826.1.3.1.1.1.15 | ColumnbgpPeerIndex | read-only | current | This field is now deprecated - use bgpPeerStatusPeerIndex instead. The peer index is a unique index for the peer entry in the bgpPeerStatusTable. It is used to… |
| 1.2.826.1.3.1.1.1.16 | ColumnbgpPeerConfedMember | read-create | current | This value indicates whether or not the peer is a member of the same confederation that this router is in. This field can only be set to true if the field bgpR… |
| 1.2.826.1.3.1.1.1.17 | ColumnbgpPeerReflectorClient | read-create | current | This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient(0) indicates that this peer is not a reflector c… |
| 1.2.826.1.3.1.1.1.18 | ColumnbgpPeerTrapEstab | read-create | current | This value indicates whether or not the Established trap is used. This field can be changed at any time. However, if the field is changed while the peer is adm… |
| 1.2.826.1.3.1.1.1.19 | ColumnbgpPeerTrapBackw | read-create | current | This value indicates whether or not the Backward Transition trap is used. This field can be changed at any time. However, if the field is changed while the pee… |
| 1.2.826.1.3.1.1.1.20 | ColumnbgpPeerCapsSupport | read-only | current | This field is now deprecated - use bgpPeerStatusCapsSupport instead. Whether or not this peer accepted our local capabilities optional parameter sent on the OP… |
| 1.2.826.1.3.1.1.1.21 | ColumnbgpPeerLastError | read-only | current | This field is now deprecated - use bgpPeerStatusLastError instead. The last error code and subcode sent or received on this connection. If no error has occurre… |
| 1.2.826.1.3.1.1.1.22 | ColumnbgpPeerLastErrorDataLen | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorDataLen instead. The length of the last error data. If this is zero no error data was provided or gene… |
| 1.2.826.1.3.1.1.1.23 | ColumnbgpPeerLastErrorData | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorData instead. The last error code's data seen by this peer on this connection. |
| 1.2.826.1.3.1.1.1.24 | ColumnbgpPeerFsmEstablishedTime | read-only | current | This field is now deprecated - use bgpPeerStatusFsmEstablishedTime instead. This timer indicates how long in seconds this peer has been in the Established stat… |
| 1.2.826.1.3.1.1.1.25 | ColumnbgpPeerInUpdatesElapsedTime | read-only | current | This field is now deprecated - use bgpPeerStatusInUpdatesElpsTime instead. Elapsed time in seconds since the last BGP message was received from the peer. Each … |
| 1.2.826.1.3.1.1.1.26 | ColumnbgpPeerConnectRetryInterval | read-create | current | Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is ch… |
| 1.2.826.1.3.1.1.1.27 | ColumnbgpPeerHoldTimeConfigd | read-create | current | Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BG… |
| 1.2.826.1.3.1.1.1.28 | ColumnbgpPeerKeepAliveConfigd | read-create | current | Time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages'… |
| 1.2.826.1.3.1.1.1.29 | ColumnbgpPeerMinASOriginationInterval | read-create | current | Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes t… |
| 1.2.826.1.3.1.1.1.30 | ColumnbgpPeerMinRouteAdvertiseInterval | read-create | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawin… |
| 1.2.826.1.3.1.1.1.31 | ColumnbgpPeerHoldTime | read-only | current | This field is now deprecated - use bgpPeerStatusHoldTime instead. Time interval in seconds for the Hold Timer established with the peer. The Hold Timer interva… |
| 1.2.826.1.3.1.1.1.32 | ColumnbgpPeerKeepAlive | read-only | current | This field is now deprecated - use bgpPeerStatusKeepAlive instead. Time interval in seconds for the KeepAlive Timer established with the peer. The KeepAlive Ti… |
| 1.2.826.1.3.1.1.1.33 | ColumnbgpPeerInUpdates | read-only | current | This field is now deprecated - use bgpPeerStatusInUpdates instead. The number of BGP UPDATE messages received on this connection. This object is initialized to… |
| 1.2.826.1.3.1.1.1.34 | ColumnbgpPeerOutUpdates | read-only | current | This field is now deprecated - use bgpPeerStatusOutUpdates instead. The number of BGP UPDATE messages transmitted on this connection. This object is initialize… |
| 1.2.826.1.3.1.1.1.35 | ColumnbgpPeerInTotalMessages | read-only | current | This field is now deprecated - use bgpPeerStatusInTotalMessages instead. The total number of messages received from the remote peer on this connection. This ob… |
| 1.2.826.1.3.1.1.1.36 | ColumnbgpPeerOutTotalMessages | read-only | current | This field is now deprecated - use bgpPeerStatusOutTotalMessages instead. The total number of messages transmitted to the remote peer on this connection. This … |
| 1.2.826.1.3.1.1.1.37 | ColumnbgpPeerFsmEstablishedTransitions | read-only | current | This field is now deprecated - use bgpPeerStatusFsmEstTransitions instead. The total number of times the BGP FSM transitioned into the established state for th… |
| 1.2.826.1.3.1.1.1.38 | ColumnbgpPeerConnectRetryCount | read-only | current | This field is now deprecated - use bgpPeerStatusConnectRetryCount instead. The current connect retry count of this peer. This is incremented each time the peer… |
| 1.2.826.1.3.1.1.1.39 | ColumnbgpPeerClearCnts | read-create | current | This field is now deprecated - use bgpPeerStatusClearCnts instead. Set to clear the counters associated with this peer. Reading the value of this field has no … |
| 1.2.826.1.3.1.1.1.40 | ColumnbgpPeerConfigPeergr | read-create | current | The index of the peer group this neighbor belongs to, or zero if this neighbor does not belong to a peer group. |
| 1.2.826.1.3.1.1.1.41 | ColumnbgpPeerConfigIndex | read-create | current | The index of the Policy Configuration Table this peer uses for its policy setup. This field may be changed when the peer is admin_status UP. A value of zero in… |
| 1.2.826.1.3.1.1.1.42 | ColumnbgpPeerConfigRtRefresh | read-create | current | This field is now deprecated - use bgpPeerStatusRtRefresh instead. Set this field to 'true' to trigger a route refresh for this peer. Setting this field will o… |
| 1.2.826.1.3.1.1.1.43 | ColumnbgpPeerConfigMaxPrfx | read-create | current | This object is used in conjunction with the address-family specific bgpPeerAfiSafiConfigMaxPrfx to limit the number of prefixes that can be accepted from this … |
| 1.2.826.1.3.1.1.1.44 | ColumnbgpPeerConfigDropWarn | read-create | current | This object is used in conjunction with the address-family specific bgpPeerAfiSafiConfigDropWarn to determine whether the session is dropped or a warning is ge… |
| 1.2.826.1.3.1.1.1.45 | ColumnbgpPeerConfigPassive | read-create | current | If TRUE, then no outbound connections will be initiated, and only incoming connections will be accepted. If FALSE, then outbound connections will be attempted … |
| 1.2.826.1.3.1.1.1.46 | ColumnbgpPeerConfigOpenDelay | read-create | current | The delay to enforce in between a TCP connection with this peer becoming established and a BGP Open message being sent. If this delay is zero, then no delay wi… |
| 1.2.826.1.3.1.1.1.47 | ColumnbgpPeerConfigIdleHold | read-create | current | The time to hold this peer in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it. No new connections will be ini… |
| 1.2.826.1.3.1.1.1.48 | ColumnbgpPeerPassword | read-create | current | The MD5 password used by this peer. This value is passed to the sockets stub at creation. bgpPeerPasswordLen must be set to the length of the string. This fiel… |
| 1.2.826.1.3.1.1.1.49 | ColumnbgpPeerTtl | read-create | current | The Time To Live used by the connection on this peer. Directly connected peers should have this set to one. A value of zero indicates the TTL socket option wil… |
| 1.2.826.1.3.1.1.1.50 | ColumnbgpPeerCheckFirstAsNum | read-create | current | Whether or not the first AS number in the AS_PATH attribute in an UPDATE received from this peer should be checked to make sure it is the same as the AS number… |
| 1.2.826.1.3.1.1.1.51 | ColumnbgpPeerAggrInclConfedAS | read-create | current | This value indicates whether or not the neighbor understands aggregated confederation AS_PATH information. If set to FALSE, no confederation AS_PATH informatio… |
| 1.2.826.1.3.1.1.1.52 | ColumnbgpPeerMinRouteWithdrawInterval | read-create | current | Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a ro… |
| 1.2.826.1.3.1.1.1.53 | ColumnbgpPeerStalePathTime | read-only | current | This field is now deprecated - use bgpPeerStatusStalePathTime instead. The maximum time in seconds that DC-BGP will wait following a peer restart or peer sessi… |
| 1.2.826.1.3.1.1.1.54 | ColumnbgpPeerCheckNextHop | read-create | current | Whether or not to check the BGP next-hop of routes sent to this peer. If set to TRUE, which is the default, then routes with a BGP next-hop which is the same a… |
| 1.2.826.1.3.1.1.1.55 | ColumnbgpPeerLocalAddrScopeId | not-accessible | current | For a peer identified by a link-local IPv6 addresses, this is the scope ID of bgpPeerLocalAddr and bgpPeerRemoteAddr. For a peer identified only by interface (… |
| 1.2.826.1.3.1.1.1.56 | ColumnbgpPeerMaxOrfEntries | read-create | current | This object is used in conjunction with the address-family specific bgpPeerAfiSafiMaxOrfEntries to limit the number of ORF entries of all types that can be acc… |
| 1.2.826.1.3.1.1.1.57 | ColumnbgpPeerOrfEntryCount | read-only | current | This field is now deprecated - use bgpPeerStatusOrfEntryCount instead. The current number of ORF entries of all types that have been received from the peer. |
| 1.2.826.1.3.1.1.1.58 | ColumnbgpPeerPeeringType | read-create | current | The type of peering relationship associated with this peer. Setting this to 'biLateral' will stop the advertisement of routes with the NOPEER community to this… |
| 1.2.826.1.3.1.1.1.59 | ColumnbgpPeerSoftResetWithStoredInfo | read-create | current | This object is used in conjunction with bgpPeerAfiSafiSoftResetStore to configure 'soft reset with stored routing information'. This option causes all routes l… |
| 1.2.826.1.3.1.1.1.60 | ColumnbgpPeerAllowLocalAs | read-create | current | The number of instances of the local AS identifier that may be contained in the route's AS-Path without rejecting the route. The AS-Path attribute of a BGP rou… |
| 1.2.826.1.3.1.1.1.61 | ColumnbgpPeerDisableSenderLoopDetect | read-create | current | This field is used in conjunction with bgpPeerAfiSafiDisableSndLpDetect to indicate whether BGP should disable sender-side loop detection when sending routes t… |
| 1.2.826.1.3.1.1.1.62 | ColumnbgpPeerDisableRouteRefresh | read-create | current | Indicates that DC-BGP should not advertise support for Route Refresh messages to this peer. When this flag is set, DC-BGP will not advertise support for Route … |
| 1.2.826.1.3.1.1.1.63 | ColumnbgpPeerFlapStatsClearStat | read-create | current | This field is now deprecated - use bgpPeerStatusFlapStatsClearStat instead. Set this field to 'true' to clear the bgpFlapStatsFlapcnt in all entries in the bgp… |
| 1.2.826.1.3.1.1.1.64 | ColumnbgpPeerFlapStatsClearMap | read-create | current | This field is now deprecated - use bgpPeerStatusFlapStatsClearMap instead. This field is set with bgpPeerFlapStatsClearStat to restrict the set of routes for w… |
| 1.2.826.1.3.1.1.1.65 | ColumnbgpPeerLastErrorRcvd | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorRcvd instead. The last error code and subcode received from the peer on this connection. If no error h… |
| 1.2.826.1.3.1.1.1.66 | ColumnbgpPeerLastErrorRcvdTime | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorRcvdTime instead. The value of sysUpTime when the last error was received from the peer on this connec… |
| 1.2.826.1.3.1.1.1.67 | ColumnbgpPeerLastErrorSent | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorSent instead. The last error code and subcode sent to the peer on this connection. If no error has bee… |
| 1.2.826.1.3.1.1.1.68 | ColumnbgpPeerLastErrorSentTime | read-only | current | This field is now deprecated - use bgpPeerStatusLastErrorSentTime instead. The value of sysUpTime when the last error was sent to the peer on this connection. … |
| 1.2.826.1.3.1.1.1.69 | ColumnbgpPeerLastState | read-only | current | This field is now deprecated - use bgpPeerStatusLastState instead. The BGP peer's previous FSM state. |
| 1.2.826.1.3.1.1.1.70 | ColumnbgpPeerLastEvent | read-only | current | This field is now deprecated - use bgpPeerStatusLastEvent instead. The last input to be made to the BGP peer's FSM. |
| 1.2.826.1.3.1.1.1.71 | ColumnbgpPeerCapsSent | read-only | current | This field is now deprecated - use bgpPeerStatusCapsSent instead. The capabilities announced to the peer on the most recent Open message sent to the peer. This… |
| 1.2.826.1.3.1.1.1.72 | ColumnbgpPeerCapsRcvd | read-only | current | This field is now deprecated - use bgpPeerStatusCapsRcvd instead. The capabilities received on the most recent Open message received from the peer. This field … |
| 1.2.826.1.3.1.1.1.73 | ColumnbgpPeerCapsNegotiated | read-only | current | This field is now deprecated - use bgpPeerStatusCapsNegotiated instead. The capabilities negotiated for the session with the peer. This field is set to zero be… |
| 1.2.826.1.3.1.1.1.74 | ColumnbgpPeerRstrSupport | read-only | current | This field is now deprecated - use bgpPeerStatusRstrSupport instead. Whether the peer supports graceful restart. This field is set to 'none' before an Open mes… |
| 1.2.826.1.3.1.1.1.75 | ColumnbgpPeerRstrFamily | read-only | current | This field is now deprecated - use bgpPeerStatusRstrFamily instead. The address and subaddress families for which the peer supports graceful restart. This fiel… |
| 1.2.826.1.3.1.1.1.76 | ColumnbgpPeerRstrRestarting | read-only | current | This field is now deprecated - use bgpPeerStatusRstrRestarting instead. Whether the peer is currently in the process of restarting. |
| 1.2.826.1.3.1.1.1.77 | ColumnbgpPeerRstrStatus | read-only | current | This field is now deprecated - use bgpPeerStatusRstrStatus instead. The current state of the peer's restart processing. If bgpPeerRstrRestarting is false, this… |
| 1.2.826.1.3.1.1.1.78 | ColumnbgpPeerRstrRemTime | read-only | current | This field is now deprecated - use bgpPeerStatusRstrRemTime instead. The time remaining in the current restart state, in hundredths of a second. If bgpPeerRstr… |
| 1.2.826.1.3.1.1.1.79 | ColumnbgpPeerRcvdMsgElapsedTime | read-only | current | This field is now deprecated - use bgpPeerStatusRcvdMsgElpsTime instead. The elapsed time in hundredths of a second since anything was received from this peer.… |
| 1.2.826.1.3.1.1.1.80 | ColumnbgpPeerIdleHoldRemTime | read-only | current | This field is now deprecated - use bgpPeerStatusIdleHoldRemTime instead. For a peer in 'idle' state, the time remaining in hundredths of a second until DC-BGP … |
| 1.2.826.1.3.1.1.1.81 | ColumnbgpPeerRouteRefrSent | read-only | current | This field is now deprecated - use bgpPeerStatusRouteRefrSent instead. The number of Route Refresh messages sent to the peer. If the session comes down this va… |
| 1.2.826.1.3.1.1.1.82 | ColumnbgpPeerRouteRefrRcvd | read-only | current | This field is now deprecated - use bgpPeerStatusRouteRefrRcvd instead. The number of Route Refresh messages received from the peer. If the session comes down t… |
| 1.2.826.1.3.1.1.1.83 | ColumnbgpPeerNxtHopSlf | read-create | current | Whether or not the peer has next hop self configured. Setting this field to a value other than 'no' causes the value of bgpPeerThirdPtyNxtHop to be ignored. Fo… |
| 1.2.826.1.3.1.1.1.84 | ColumnbgpPeerThirdPtyNxtHop | read-create | current | Whether or not the local BGP speaker should advertise routes received from this peer using third party next hop (this is optional behaviour described in the BG… |
| 1.2.826.1.3.1.1.1.85 | ColumnbgpPeerNxtHopPeer | read-create | current | Whether or not the local BGP speaker should override the use of third party next hop by an EBGP peer. If an EBGP peer speaker uses third party next hop, routes… |
| 1.2.826.1.3.1.1.1.86 | ColumnbgpPeerTrapPrefix | read-create | current | Used in conjunction with bgpPeerAfiSafiTrapPrefix to determine whether BGP issues an SNMP trap when the number of prefixes received from this peer reaches the … |
| 1.2.826.1.3.1.1.1.87 | ColumnbgpPeerConfigThreshold | read-create | current | A percentage of the limit set by bgpPeerConfigMaxPrfx. When the number of prefixes received from this peer reaches this threshold, BGP issues a warning. The ac… |
| 1.2.826.1.3.1.1.1.88 | ColumnbgpPeerMaxPrfxHold | read-create | current | The time interval in seconds between when this BGP session is torn down due to the number of prefixes received from this peer exceeding the maximum in bgpPeerC… |
| 1.2.826.1.3.1.1.1.89 | ColumnbgpPeerSelectedLocalAddrType | read-only | current | This field is now deprecated - use bgpPeerStatusSelLocalAddrType instead. The address family of the local address used by the transport connection for the peer… |
| 1.2.826.1.3.1.1.1.90 | ColumnbgpPeerSelectedLocalAddr | read-only | current | This field is now deprecated - use bgpPeerStatusSelLocalAddr instead. The local address used by the transport connection for the peering session. If a connecti… |
| 1.2.826.1.3.1.1.1.91 | ColumnbgpPeerSelectedLocalPort | read-only | current | This field is now deprecated - use bgpPeerStatusSelLocalPort instead. The local port used by the transport connection for the peering session. If a connection … |
| 1.2.826.1.3.1.1.1.92 | ColumnbgpPeerSelectedRemotePort | read-only | current | This field is now deprecated - use bgpPeerStatusSelRemotePort instead. The remote port used by the transport connection for the peering session. If a connectio… |
| 1.2.826.1.3.1.1.1.93 | ColumnbgpPeerBfdDesired | read-create | current | Indicates whether Bidirectional Forwarding Detection (BFD) is desired for this peer. If the NM entity managing this peer session (configured using bgpPeerLocal… |
| 1.2.826.1.3.1.1.1.94 | ColumnbgpPeerBfdStatus | read-only | current | This field is now deprecated - use bgpPeerStatusBfdStatus instead. BFD session state for this peer. |
| 1.2.826.1.3.1.1.1.95 | ColumnbgpPeerCeaseErrorSubcode | read-create | current | This field is now deprecated - use bgpPeerStatusCeaseErrorSubcode instead. The error subcode to be sent in the Cease Notification messages triggered by MIB req… |
| 1.2.826.1.3.1.1.1.96 | ColumnbgpPeerConfAltLocalAs | read-create | current | An alternative local AS number that can be used to establish a session with this peer. This is used when merging two ASs into a single AS. A value of zero mean… |
| 1.2.826.1.3.1.1.1.97 | ColumnbgpPeerSelectedLocalAs | read-only | current | This field is now deprecated - use bgpPeerStatusSelLocalAs instead. The local AS number used on this session. If bgpPeerConfAltLocalAs is set to a non-zero val… |
| 1.2.826.1.3.1.1.1.98 | ColumnbgpPeerSelectedRemoteAs | read-only | current | This field is now deprecated - use bgpPeerStatusSelRemoteAs instead. The remote AS number used on this session. If bgpPeerConfAltLocalAs is set to a non-zero v… |
| 1.2.826.1.3.1.1.1.99 | ColumnbgpPeerInPrfxes | read-only | current | This field is now deprecated - use bgpPeerStatusInPrfxes instead. The total number of prefixes received from this peer. When additional paths are enabled, rout… |
| 1.2.826.1.3.1.1.1.100 | ColumnbgpPeerOutPrfxes | read-only | current | This field is now deprecated - use bgpPeerStatusOutPrfxes instead. The number of prefixes that are installed in all of this peer's Adj-RIBs-Out. When additiona… |
| 1.2.826.1.3.1.1.1.101 | ColumnbgpPeerOutPrfxesAdvertised | read-only | current | This field is now deprecated - use bgpPeerStatusOutPrfxesAdvertised instead. The total number of prefixes advertised to this peer. When additional paths are en… |
| 1.2.826.1.3.1.1.1.102 | ColumnbgpPeerTrapGrHelperState | read-create | current | This value indicates whether or not the Graceful Restart helper trap is used. If in use for this peer, DC-BGP will send a trap whenever the peer restart status… |
| 1.2.826.1.3.1.1.1.103 | ColumnbgpPeerEnableAttributeDiscard | read-create | current | This value indicates whether or not the 'attribute discard' error handling mechanism is used for BGP UPDATE messages received from this peer. This mechanism ap… |
| 1.2.826.1.3.1.1.1.104 | ColumnbgpPeerConfAltLocalAsMode | read-create | current | This field controls the operation of the alternative local AS number specified by the bgpPeerConfAltLocalAs field. It has no effect unless bgpPeerConfAltLocalA… |
| 1.2.826.1.3.1.1.1.105 | ColumnbgpPeerSendComm | read-create | current | This value indicates whether or not to send BGP community attributes to the peer. When set to 'true', and bgpPeerAfiSafiSendComm for the relevant address famil… |
| 1.2.826.1.3.1.1.1.106 | ColumnbgpPeerSendExtComm | read-create | current | This value indicates whether or not to send BGP extended community attributes to the peer. When set to 'true', and bgpPeerAfiSafiSendExtComm for the relevant a… |
| 1.2.826.1.3.1.1.1.107 | ColumnbgpPeerConfigUsage | read-create | current | A set of bit flags, used together with bgpPeerConfigUsage2 and bgpPeerConfigUsage3, which control where the peer picks up its configuration from. A bit flag ex… |
| 1.2.826.1.3.1.1.1.108 | ColumnbgpPeerWeight | read-create | current | This value defines the weight to be applied to routes received from this neighbor. All routes learned from this neighbor will be given this weight initially. T… |
| 1.2.826.1.3.1.1.1.109 | ColumnbgpPeerFallover | read-create | current | This value indicates whether or not to monitor the route to this peer so that the session can be deactivated if the route fails. Monitoring the route means DC-… |
| 1.2.826.1.3.1.1.1.110 | ColumnbgpPeerConfigUsage2 | read-create | current | A set of bit flags, used together with bgpPeerConfigUsage and bgpPeerConfigUsage3, which control where the peer picks up its configuration from. A bit flag exi… |
| 1.2.826.1.3.1.1.1.111 | ColumnbgpPeerDmzLink | read-create | current | For an eBGP peer, this field indicates whether all routes with IPv4 address family received from the peer should have an extended community attached containing… |
| 1.2.826.1.3.1.1.1.112 | ColumnbgpPeerRemovePrivate | read-write | current | Whether private AS numbers are removed from the AS path before sending an update to this peer. This is only relevant for an eBGP peer. |
| 1.2.826.1.3.1.1.1.113 | ColumnbgpPeerAsOverride | read-write | current | Whether Neighbor AS numbers are replaced with the local AS number from the AS path before sending an update to this peer. This is only relevant for an eBGP pee… |
| 1.2.826.1.3.1.1.1.114 | ColumnbgpPeerDistListAclIn | read-create | current | The Access List index identifying the Access List to use to filter routes received from the peer. If this index is non-zero and the Access List with this index… |
| 1.2.826.1.3.1.1.1.115 | ColumnbgpPeerDistListAclOut | read-create | current | The Access List index identifying the Access List to use to filter routes advertised to the peer. If this index is non-zero and the Access List with this index… |
| 1.2.826.1.3.1.1.1.116 | ColumnbgpPeerDistListPlIn | read-create | current | The Prefix List index identifying the Prefix List to use to filter routes received from the peer. If this index is non-zero and the Prefix List with this index… |
| 1.2.826.1.3.1.1.1.117 | ColumnbgpPeerDistListPlOut | read-create | current | The Prefix List index identifying the Prefix List to use to filter routes advertised to the peer. If this index is non-zero and the Prefix List with this index… |
| 1.2.826.1.3.1.1.1.118 | ColumnbgpPeerFilterListIn | read-create | current | The Filter List index identifying the Filter List to use to filter routes received from the peer. If this index is non-zero and the Filter List with this index… |
| 1.2.826.1.3.1.1.1.119 | ColumnbgpPeerFilterListOut | read-create | current | The Filter List index identifying the Filter List to use to filter routes advertised to the peer. If this index is non-zero and the Filter List with this index… |
| 1.2.826.1.3.1.1.1.120 | ColumnbgpPeerAddrSourceIf | read-create | current | The interface index for the interface from which the source address for session is chosen. If non-zero, BGP will look for the first address on this interface w… |
| 1.2.826.1.3.1.1.1.121 | ColumnbgpPeerUseImportLocalPref | read-create | current | This field defines whether the value in bgpPeerImportLocalPref should be used to configure the local preference value assigned to routes received from this pee… |
| 1.2.826.1.3.1.1.1.122 | ColumnbgpPeerImportLocalPref | read-create | current | Configures the local preference value assigned to routes received from this peer. This overrides the value received from the peer. This field is only used if b… |
| 1.2.826.1.3.1.1.1.123 | ColumnbgpPeerUseExportLocalPref | read-create | current | This field defines whether the value in bgpPeerExportLocalPref should be used to configure the local preference value assigned to routes sent to this peer. The… |
| 1.2.826.1.3.1.1.1.124 | ColumnbgpPeerExportLocalPref | read-create | current | Configures the local preference value assigned to routes being sent to this peer. This overrides the value already set for the local preference of a route. Thi… |
| 1.2.826.1.3.1.1.1.125 | ColumnbgpPeerSlowPeer | read-create | current | Marks the peer as a slow peer. When update groups are in use, slow peers are kept separate from other peers to prevent backpressure from the slow peers slowing… |
| 1.2.826.1.3.1.1.1.126 | ColumnbgpPeerConfigUsage3 | read-create | current | A set of bit flags, used together with bgpPeerConfigUsage and bgpPeerConfigUsage2 which control where the peer picks up its configuration from. A bit flag exis… |
| 1.2.826.1.3.1.1.1.127 | ColumnbgpPeerAddrSourceType | read-create | current | The address type of the bgpPeerAddrSource field. Setting this field to the default value means that bgpPeerAddrSource is unspecified. This field is ignored for… |
| 1.2.826.1.3.1.1.1.128 | ColumnbgpPeerAddrSource | read-create | current | If an address is specified with a type matching bgpPeerRemoteAddrType, and bgpPeerAddrSourceIf is NOT specified, then BGP will use this address as the source a… |
| 1.2.826.1.3.1.1.1.129 | ColumnbgpPeerMaxPrfxClear | read-create | current | This object is used in conjunction with the address-family specific bgpPeerAfiSafiMaxPrfxClear to control when a bgpPeerAfiSafiMaxPrefixClear trap is sent. Thi… |
| 1.2.826.1.3.1.1.1.130 | ColumnbgpPeerPrfxThresholdClear | read-create | current | A percentage of the limit set by bgpPeerConfigMaxPrfx. This object is used in conjunction with the address-family specific bgpPeerAfiSafiPrfxThrsholdClear to c… |
| 1.2.826.1.3.1.1.1.131 | ColumnbgpPeerTtlSecurityMinTtl | read-create | current | The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL S… |
| 1.2.826.1.3.1.1.1.132 | ColumnbgpPeerRemovePrivateAs | read-create | current | Whether private AS numbers are removed from the AS path or replaced with the local AS number before sending an update to this peer. This is only relevant for a… |
| 1.2.826.1.3.1.2 | TablebgpPeerAfiSafiTable | not-accessible | current | Peer <AFI, SAFI> configuration table. This table allows a user to configure peer characteristics on a per AFI/SAFI basis. This table is a configuration table -… |
| 1.2.826.1.3.1.2.1 | RowbgpPeerAfiSafiEntry | not-accessible | current | Peer <AFI, SAFI> configuration table entry. |
| 1.2.826.1.3.1.2.1.8 | ColumnbgpPeerAfiSafiAfi | not-accessible | current | The AFI index into the peer <AFI, SAFI> table. |
| 1.2.826.1.3.1.2.1.9 | ColumnbgpPeerAfiSafiSafi | not-accessible | current | The SAFI index into the peer <AFI, SAFI> table. |
| 1.2.826.1.3.1.2.1.10 | ColumnbgpPeerAfiSafiDisable | read-create | current | When bgpPeerAfiSafiDisable is 'true', BGP will not advertise Multiprotocol support to the peer for this address family. When bgpPeerAfiSafiDisable is 'false', … |
| 1.2.826.1.3.1.2.1.11 | ColumnbgpPeerAfiSafiConfigRtRefresh | read-create | current | This field is now deprecated - use bgpPeerAfiSafiStRtRefresh instead. Set this to 'true' to trigger BGP to send a Route Refresh to the peer for this AFI/SAFI. … |
| 1.2.826.1.3.1.2.1.12 | ColumnbgpPeerAfiSafiAllowLocalAs | read-create | current | The number of instances of the local AS identifier that may be contained in the route's AS-Path without rejecting the route. The AS-Path attribute of a BGP rou… |
| 1.2.826.1.3.1.2.1.13 | ColumnbgpPeerAfiSafiDisableSndLpDetect | read-create | current | Gives finer control of the sender-side loop detection configuration provided by bgpPeerDisableSenderLoopDetect. By default, BGP performs sender side loop detec… |
| 1.2.826.1.3.1.2.1.14 | ColumnbgpPeerAfiSafiNxtHopSlf | read-create | current | Gives finer control of the next-hop-self configuration provided by bgpPeerNxtHopSlf. If the bgpPeerAfiSafiUsePeerNxtHopSlf bit is set in the bgpPeerAfiSafiConf… |
| 1.2.826.1.3.1.2.1.15 | ColumnbgpPeerAfiSafiOrigDefault | read-create | current | Indicates whether BGP should originate a default route to the peer for this AFI/SAFI. BGP cannot originate default VPN routes and so bgpPeerAfiSafiOrigDefault … |
| 1.2.826.1.3.1.2.1.16 | ColumnbgpPeerAfiSafiOrigDefaultRtMap | read-create | current | Configured policy for origination of default routes. The value of bgpPeerAfiSafiOrigDefaultRtMap is only examined if bgpPeerAfiSafiOrigDefault is 'true'. It id… |
| 1.2.826.1.3.1.2.1.17 | ColumnbgpPeerAfiSafiSoftResetStore | read-create | current | Gives finer control of the soft reset configuration provided by bgpPeerSoftResetWithStoredInfo. When bgpPeerSoftResetWithStoredInfo is 'false', BGP does not pe… |
| 1.2.826.1.3.1.2.1.18 | ColumnbgpPeerAfiSafiConfigMaxPrfx | read-create | current | Gives finer control of the maximum prefix configuration provided by bgpPeerConfigMaxPrfx. To configure address family specific values for the maximum number of… |
| 1.2.826.1.3.1.2.1.19 | ColumnbgpPeerAfiSafiConfigDropWarn | read-create | current | Gives finer control of the configuration provided by bgpPeerConfigDropWarn, which determines the behavior when the maximum prefix limit is reached. To configur… |
| 1.2.826.1.3.1.2.1.20 | ColumnbgpPeerAfiSafiTrapPrefix | read-create | current | Gives finer control of the configuration provided by bgpPeerTrapPrefix. To disable sending of traps for all address families, set bgpPeerTrapPrefix to 'false'.… |
| 1.2.826.1.3.1.2.1.21 | ColumnbgpPeerAfiSafiConfigThreshold | read-create | current | Gives finer control of the threshold configuration provided by bgpPeerConfigThreshold. When the number of prefixes received from this peer for this address fam… |
| 1.2.826.1.3.1.2.1.22 | ColumnbgpPeerAfiSafiMaxPrfxHold | read-create | current | Gives finer control of the configuration provided by bgpPeerMaxPrfxHold, which determines the time interval in seconds between when this BGP session is torn do… |
| 1.2.826.1.3.1.2.1.23 | ColumnbgpPeerAfiSafiMaxOrfEntries | read-create | current | Gives finer control of the maximum number of ORF entries configuration provided by bgpPeerMaxOrfEntries. To configure address family specific values for the ma… |
| 1.2.826.1.3.1.2.1.25 | ColumnbgpPeerAfiSafiAddPathCapCfg | read-create | current | The configured BGP additional path capability for this peer and AFI/SAFI. Valid values are: - AMB_BGP_ADD_PATH_SR_INHERIT Inherit configuration from the entity… |
| 1.2.826.1.3.1.2.1.26 | ColumnbgpPeerAfiSafiAddPathCapNeg | read-only | current | This field is now deprecated - use bgpPeerAfiSafiStAddPathCapNeg instead. The BGP additional path capability negotiated with this peer for this AFI/SAFI. Valid… |
| 1.2.826.1.3.1.2.1.27 | ColumnbgpPeerAfiSafiAddPathBestN | read-create | current | The number of best paths to advertise to this peer as additional paths for this AFI/SAFI. The number of candidate paths available to advertise to the peer depe… |
| 1.2.826.1.3.1.2.1.28 | ColumnbgpPeerAfiSafiImportMap | read-create | current | The index of the Route Map to use for route imports from the peer for this AFI/SAFI. The peer may be configured to ignore this field and instead obtain the val… |
| 1.2.826.1.3.1.2.1.29 | ColumnbgpPeerAfiSafiExportMap | read-create | current | The index of the Route Map to use for route exports to the peer for this AFI/SAFI. The peer may be configured to ignore this field and instead obtain the value… |
| 1.2.826.1.3.1.2.1.30 | ColumnbgpPeerAfiSafiImportIpPre | read-create | current | This field is deprecated. It is retained for back compatibility. Use the bgpPeerAfiSafiImportIpAallPre field instead. The index of the IP prefix list to use fo… |
| 1.2.826.1.3.1.2.1.31 | ColumnbgpPeerAfiSafiExportIpPre | read-create | current | This field is deprecated. It is retained for back compatibility. Use the bgpPeerAfiSafiExportIpAallPre field instead. The index of the IP prefix list to use fo… |
| 1.2.826.1.3.1.2.1.32 | ColumnbgpPeerAfiSafiImportIpAallPre | read-create | current | The index of the AALL IP prefix access list to use for route imports from the peer for this AFI/SAFI. Route import policy applies any import IP prefix access l… |
| 1.2.826.1.3.1.2.1.33 | ColumnbgpPeerAfiSafiExportIpAallPre | read-create | current | The index of the AALL IP prefix access list to use for route exports to the peer for this AFI/SAFI. Route export policy applies any export IP prefix access lis… |
| 1.2.826.1.3.1.2.1.34 | ColumnbgpPeerAfiSafiReflectorClient | read-create | current | Gives finer control of the configuration provided by bgpPeerReflectorClient. This value indicates whether the given peer is a reflector client of this router f… |
| 1.2.826.1.3.1.2.1.35 | ColumnbgpPeerAfiSafiAsOverride | read-create | current | This field is used in conjunction with bgpPeerAsOverride to indicate whether BGP should perform AS-override on routes advertised to the peer. If AS-override is… |
| 1.2.826.1.3.1.2.1.36 | ColumnbgpPeerAfiSafiMinASOrigInt | read-create | current | Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes t… |
| 1.2.826.1.3.1.2.1.37 | ColumnbgpPeerAfiSafiMinRteAdvertInt | read-create | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawin… |
| 1.2.826.1.3.1.2.1.38 | ColumnbgpPeerAfiSafiMinRteWithdrawInt | read-create | current | Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a ro… |
| 1.2.826.1.3.1.2.1.39 | ColumnbgpPeerAfiSafiSendComm | read-create | current | This field is used in conjunction with the bgpPeerSendComm field in the bgpPeerTable to indicate whether BGP will send UPDATE messages to the peer for this add… |
| 1.2.826.1.3.1.2.1.40 | ColumnbgpPeerAfiSafiSendExtComm | read-create | current | This field is used in conjunction with the bgpPeerSendExtComm field in the bgpPeerTable to indicate whether BGP will send UPDATE messages to the peer for this … |
| 1.2.826.1.3.1.2.1.41 | ColumnbgpPeerAfiSafiConfigUsage | read-create | current | A set of bit flags which controls whether peer AFI/SAFI configuration is taken from this table or from peer configuration. A bit flag exists for a subset of th… |
| 1.2.826.1.3.1.2.1.42 | ColumnbgpPeerAfiSafiMaxPrfxClear | read-create | current | Gives finer control over the configuration provided by bgpPeerMaxPrfxClear. To configure address family specific values, set bgpPeerMaxPrfxClear to zero and se… |
| 1.2.826.1.3.1.2.1.43 | ColumnbgpPeerAfiSafiPrfxThrsholdClear | read-create | current | Gives finer control over the configuration provided by bgpPeerPrxThresholdClear. To configure address family specific values, set bgpPeerPrfxThresholdClear to … |
| 1.2.826.1.3.1.2.1.44 | ColumnbgpPeerAfiSafiPreserveNh | read-create | current | This field is used to preserve the BGP next hop when forwarding routes to this eBGP peer. By default, the next hop of a route is preserved when advertising the… |
| 1.2.826.1.3.1.2.1.45 | ColumnbgpPeerAfiSafiAcceptRmtNxtHop | read-create | current | If set to false for a directly connected eBGP peer, routes received from the peer with a next-hop that is not the peer's remote address and is not in a subnet … |
| 1.2.826.1.3.1.2.1.46 | ColumnbgpPeerAfiSafiConfigFromGr | read-create | current | A set of bit flags which control whether peer AFI/SAFI configuration is taken from peer group level configuration (bgpPeergrTable or bgpPeergrAfiSafiTable), or… |
| 1.2.826.1.3.1.3 | TablebgpPeerOrfCapabilityTable | not-accessible | current | DC-BGP Peer ORF Capability Table. This table allows a user to configure ORF on a per peer basis. Rows in this table cannot be created or destroyed manually. A … |
| 1.2.826.1.3.1.3.1 | RowbgpPeerOrfCapabilityEntry | not-accessible | current | Entry containing peer specific information about support for an ORF defined by <AFI, SAFI, ORF Type>. |
| 1.2.826.1.3.1.3.1.8 | ColumnbgpPeerOrfCapabilityAfi | not-accessible | current | Specifies the address family with which this ORF is associated. |
| 1.2.826.1.3.1.3.1.9 | ColumnbgpPeerOrfCapabilitySafi | not-accessible | current | Specifies the Subsequent Address Family Indentifier with which this ORF is associated. |
| 1.2.826.1.3.1.3.1.10 | ColumnbgpPeerOrfCapabilityOrfType | not-accessible | current | Indicates the type of this ORF. |
| 1.2.826.1.3.1.3.1.11 | ColumnbgpPeerOrfCapabilityAdminStatus | read-create | current | The administrative status for this ORF entry. |
| 1.2.826.1.3.1.3.1.12 | ColumnbgpPeerOrfCapabilitySendReceive | read-create | current | Indicates whether the sender is (a) willing to receive ORF entries from its peer, (b) would like to send ORF entries to its peer, or (c) both. This field will … |
| 1.2.826.1.3.1.4 | TablebgpPeerStatusTable | not-accessible | current | BGP peer status table. This table reports BGP peer status and statistics. It also allows a user to control BGP peer statistics and peer sessions. This table do… |
| 1.2.826.1.3.1.4.1 | RowbgpPeerStatusEntry | not-accessible | current | Entry containing information about the status of a BGP peer. |
| 1.2.826.1.3.1.4.1.9 | ColumnbgpPeerStatusIdentifier | read-only | current | The BGP Identifier of this entry's BGP peer. This entry is zero unless the bgpPeerStatusState is in the openconfirm or the established state. |
| 1.2.826.1.3.1.4.1.10 | ColumnbgpPeerStatusState | read-only | current | The BGP peer's FSM state. |
| 1.2.826.1.3.1.4.1.11 | ColumnbgpPeerStatusDropSession | read-create | current | Set this field to 'true' to drop the current session with the BGP peer. For a dynamic BGP peer this causes the peer status entry to disappear if the BGP sessio… |
| 1.2.826.1.3.1.4.1.12 | ColumnbgpPeerStatusCeaseErrorSubcode | read-create | current | The error subcode to be sent in the Cease Notification messages triggered by setting bgpPeerStatusDropSession to 'true'. If set to 'none' then DC-BGP chooses t… |
| 1.2.826.1.3.1.4.1.13 | ColumnbgpPeerStatusDynamicPeer | read-only | current | Whether the peer is dynamic (true) or individually configured (false). Configured peers are configured individually in the bgpPeerTable MIB. The corresponding … |
| 1.2.826.1.3.1.4.1.14 | ColumnbgpPeerStatusLocalNm | read-only | current | The entity index of the Neighbor Manager for peering sessions with this peer. |
| 1.2.826.1.3.1.4.1.15 | ColumnbgpPeerStatusRemoteAs | read-only | current | The remote autonomous system number in use on the session. For configured peers not yet active, this is the configured value. This value may be different from … |
| 1.2.826.1.3.1.4.1.16 | ColumnbgpPeerStatusPeerIndex | read-only | current | The peer index. The peer index is a unique index for the peer entry in the bgpPeerStatusTable. It is used to provide an index value for other tables whose data… |
| 1.2.826.1.3.1.4.1.17 | ColumnbgpPeerStatusCapsSupport | read-only | current | Whether or not this peer accepted our local capabilities optional parameter sent on the OPEN message. This field will not be relevant until the peer has reache… |
| 1.2.826.1.3.1.4.1.18 | ColumnbgpPeerStatusLastError | read-only | current | The last error code and subcode sent or received on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte O… |
| 1.2.826.1.3.1.4.1.19 | ColumnbgpPeerStatusLastErrorDataLen | read-only | current | The length of the last error data. If this is zero no error data was provided or generated. |
| 1.2.826.1.3.1.4.1.20 | ColumnbgpPeerStatusLastErrorData | read-only | current | The last error code's data seen by this peer on this connection. |
| 1.2.826.1.3.1.4.1.21 | ColumnbgpPeerStatusFsmEstablishedTime | read-only | current | This timer indicates how long in seconds this peer has been in the Established state or how long since this peer was last in the Established state. It is set t… |
| 1.2.826.1.3.1.4.1.22 | ColumnbgpPeerStatusInUpdatesElpsTime | read-only | current | Elapsed time in seconds since the last BGP Update message was received from the peer. |
| 1.2.826.1.3.1.4.1.23 | ColumnbgpPeerStatusHoldTime | read-only | current | Time interval in seconds for the Hold Timer established with the peer. The Hold Timer interval is calculated by this BGP speaker by using the smaller of the co… |
| 1.2.826.1.3.1.4.1.24 | ColumnbgpPeerStatusKeepAlive | read-only | current | Time interval in seconds for the KeepAlive Timer established with the peer. The KeepAlive Timer interval is calculated by this BGP speaker such that, when comp… |
| 1.2.826.1.3.1.4.1.25 | ColumnbgpPeerStatusInOpens | read-only | current | The number of BGP OPEN messages received on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPeerStatusC… |
| 1.2.826.1.3.1.4.1.26 | ColumnbgpPeerStatusOutOpens | read-only | current | The number of BGP OPEN messages transmitted on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPeerStat… |
| 1.2.826.1.3.1.4.1.27 | ColumnbgpPeerStatusInNotifications | read-only | current | The number of BGP NOTIFICATION messages received on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPee… |
| 1.2.826.1.3.1.4.1.28 | ColumnbgpPeerStatusOutNotifications | read-only | current | The number of BGP NOTIFICATION messages transmitted on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgp… |
| 1.2.826.1.3.1.4.1.29 | ColumnbgpPeerStatusInUpdates | read-only | current | The number of BGP UPDATE messages received on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPeerStatu… |
| 1.2.826.1.3.1.4.1.30 | ColumnbgpPeerStatusOutUpdates | read-only | current | The number of BGP UPDATE messages transmitted on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPeerSt… |
| 1.2.826.1.3.1.4.1.31 | ColumnbgpPeerStatusInKeepalives | read-only | current | The number of BGP KEEPALIVE messages received on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPeerSt… |
| 1.2.826.1.3.1.4.1.32 | ColumnbgpPeerStatusOutKeepalives | read-only | current | The number of BGP KEEPALIVE messages transmitted on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPee… |
| 1.2.826.1.3.1.4.1.33 | ColumnbgpPeerStatusInRefreshes | read-only | current | The number of BGP ROUTE REFRESH messages received on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bgpPe… |
| 1.2.826.1.3.1.4.1.34 | ColumnbgpPeerStatusOutRefreshes | read-only | current | The number of BGP ROUTE REFRESH messages transmitted on this connection. This counter is reset to zero when the peer moves out of oper status Up or when the bg… |
| 1.2.826.1.3.1.4.1.35 | ColumnbgpPeerStatusInTotalMessages | read-only | current | The total number of messages received from the remote peer on this connection. This counter is reset to zero when the peer moves out of oper status Up or when … |
| 1.2.826.1.3.1.4.1.36 | ColumnbgpPeerStatusOutTotalMessages | read-only | current | The total number of messages transmitted to the remote peer on this connection. This counter is reset to zero when the peer moves out of oper status Up or when… |
| 1.2.826.1.3.1.4.1.37 | ColumnbgpPeerStatusFsmEstTransitions | read-only | current | The total number of times the BGP FSM transitioned into the established state for this peer. |
| 1.2.826.1.3.1.4.1.38 | ColumnbgpPeerStatusConnectRetryCount | read-only | current | The current connect retry count of this peer. This is incremented each time the peer session flaps, and is used to determine the time to wait before retrying t… |
| 1.2.826.1.3.1.4.1.39 | ColumnbgpPeerStatusClearCnts | read-create | current | Set this field to 'true' to clear the counters associated with this peer. Reading the value of this field has no meaning. The field is not returned on a MIB Ge… |
| 1.2.826.1.3.1.4.1.40 | ColumnbgpPeerStatusPeergr | read-only | current | The index of the peer group this neighbor belongs to, or zero if this neighbor does not belong to a peer group. For dynamic peers, this is the peer group index… |
| 1.2.826.1.3.1.4.1.41 | ColumnbgpPeerStatusRtRefresh | read-create | current | Set this field to 'true' to trigger sending a route refresh request for this peer. Setting this field will only have an effect if a BGP session to the peer is … |
| 1.2.826.1.3.1.4.1.42 | ColumnbgpPeerStatusStalePathTime | read-only | current | The maximum time in seconds that DC-BGP will wait following a peer restart or peer session failure before removing stale routes from that peer. This is adverti… |
| 1.2.826.1.3.1.4.1.43 | ColumnbgpPeerStatusOrfEntryCount | read-only | current | The current number of ORF entries of all types that have been received from the peer. |
| 1.2.826.1.3.1.4.1.44 | ColumnbgpPeerStatusFlapStatsClearStat | read-create | current | Set this field to 'true' to clear the bgpFlapStatsFlapcnt in all entries in the bgpNlriTable matching routes from this peer. This will not unsuppress a suppres… |
| 1.2.826.1.3.1.4.1.45 | ColumnbgpPeerStatusFlapStatsClearMap | read-create | current | This field is set with bgpPeerStatusFlapStatsClearStat to restrict the set of routes for which bgpFlapStatsFlapcnt is reset when bgpPeerStatusFlapStatsClearSta… |
| 1.2.826.1.3.1.4.1.46 | ColumnbgpPeerStatusLastErrorRcvd | read-only | current | The last error code and subcode received from the peer on this connection. If no error has been received from the peer, this field is zero. Otherwise, the firs… |
| 1.2.826.1.3.1.4.1.47 | ColumnbgpPeerStatusLastErrorRcvdTime | read-only | current | The value of sysUpTime when the last error was received from the peer on this connection. If no error has been received from the peer, this field is zero. |
| 1.2.826.1.3.1.4.1.48 | ColumnbgpPeerStatusLastErrorSent | read-only | current | The last error code and subcode sent to the peer on this connection. If no error has been sent to the peer, this field is zero. Otherwise, the first byte of th… |
| 1.2.826.1.3.1.4.1.49 | ColumnbgpPeerStatusLastErrorSentTime | read-only | current | The value of sysUpTime when the last error was sent to the peer on this connection. If no error has been sent to the peer, this field is zero. |
| 1.2.826.1.3.1.4.1.50 | ColumnbgpPeerStatusLastState | read-only | current | The BGP peer's previous FSM state. |
| 1.2.826.1.3.1.4.1.51 | ColumnbgpPeerStatusLastEvent | read-only | current | The last input to be made to the BGP peer's FSM. |
| 1.2.826.1.3.1.4.1.52 | ColumnbgpPeerStatusCapsSent | read-only | current | The capabilities announced to the peer on the most recent Open message sent to the peer. This field is set to zero before the first Open message is sent to the… |
| 1.2.826.1.3.1.4.1.53 | ColumnbgpPeerStatusCapsRcvd | read-only | current | The capabilities received on the most recent Open message received from the peer. This field is set to zero before the first Open message is received from the … |
| 1.2.826.1.3.1.4.1.54 | ColumnbgpPeerStatusCapsNegotiated | read-only | current | The capabilities negotiated for the session with the peer. This field is set to zero before Open messages have been exchanged with the peer, and is unchanged i… |
| 1.2.826.1.3.1.4.1.55 | ColumnbgpPeerStatusRstrSupport | read-only | current | Whether the peer supports graceful restart. This field is set to 'none' before an Open message has been received from a peer, and is unchanged if the session c… |
| 1.2.826.1.3.1.4.1.56 | ColumnbgpPeerStatusRstrFamily | read-only | current | The address and subaddress families for which the peer supports graceful restart. This field is set to zero before an Open message has been received from a pee… |
| 1.2.826.1.3.1.4.1.57 | ColumnbgpPeerStatusRstrRestarting | read-only | current | Whether the peer is currently in the process of restarting. |
| 1.2.826.1.3.1.4.1.58 | ColumnbgpPeerStatusRstrStatus | read-only | current | The current state of the peer's restart processing. If bgpPeerStatusRstrRestarting is false, this is set to notRestarting. |
| 1.2.826.1.3.1.4.1.59 | ColumnbgpPeerStatusRstrRemTime | read-only | current | The time remaining in the current restart state, in hundredths of a second. If bgpPeerStatusRstrStatus is notRestarting, this is set to zero. |
| 1.2.826.1.3.1.4.1.60 | ColumnbgpPeerStatusRcvdMsgElpsTime | read-only | current | The elapsed time in hundredths of a second since anything was received from this peer. If nothing has been received from this peer, this field is set to zero. … |
| 1.2.826.1.3.1.4.1.61 | ColumnbgpPeerStatusIdleHoldRemTime | read-only | current | For a peer in 'idle' state, the time remaining in hundredths of a second until DC-BGP will try to reactivate the connection. If the peer is not in 'idle' state… |
| 1.2.826.1.3.1.4.1.62 | ColumnbgpPeerStatusRouteRefrSent | read-only | current | The number of Route Refresh messages sent to the peer. If the session comes down this value is unchanged, and will continue to increment if the session is rees… |
| 1.2.826.1.3.1.4.1.63 | ColumnbgpPeerStatusRouteRefrRcvd | read-only | current | The number of Route Refresh messages received from the peer. If the session comes down this value is unchanged, and will continue to increment if the session i… |
| 1.2.826.1.3.1.4.1.64 | ColumnbgpPeerStatusSelLocalAddrType | read-only | current | The address family of the local address used by the transport connection for the peering session. If a connection exists then this field will be identical to b… |
| 1.2.826.1.3.1.4.1.65 | ColumnbgpPeerStatusSelLocalAddr | read-only | current | The local address used by the transport connection for the peering session. If a connection exists and bgpPeerLocalAddr is specified then these two fields will… |
| 1.2.826.1.3.1.4.1.66 | ColumnbgpPeerStatusSelLocalPort | read-only | current | The local port used by the transport connection for the peering session. If a connection exists and bgpPeerLocalPort is non-zero then these two fields will be … |
| 1.2.826.1.3.1.4.1.67 | ColumnbgpPeerStatusSelRemotePort | read-only | current | The remote port used by the transport connection for the peering session. If a connection exists and bgpPeerRemotePort is non-zero then these two fields will b… |
| 1.2.826.1.3.1.4.1.68 | ColumnbgpPeerStatusBfdStatus | read-only | current | BFD session state for this peer. |
| 1.2.826.1.3.1.4.1.69 | ColumnbgpPeerStatusSelLocalAs | read-only | current | The local AS number used on this session. If bgpPeerConfAltLocalAs is set to a non-zero value, then the session might have been set up advertising one of two l… |
| 1.2.826.1.3.1.4.1.70 | ColumnbgpPeerStatusSelRemoteAs | read-only | current | The remote AS number used on this session. If bgpPeerConfAltLocalAs is set to a non-zero value, and if this is an IBGP peer, then the remote peer might have ad… |
| 1.2.826.1.3.1.4.1.71 | ColumnbgpPeerStatusInPrfxes | read-only | current | The total number of prefixes received from this peer. When additional paths are enabled, routes with different path ID values count as different prefixes. This… |
| 1.2.826.1.3.1.4.1.72 | ColumnbgpPeerStatusOutPrfxes | read-only | current | The number of prefixes that are installed in all of this peer's Adj-RIBs-Out. When additional paths are enabled, routes with different path ID values count as … |
| 1.2.826.1.3.1.4.1.73 | ColumnbgpPeerStatusOutPrfxesAdvertised | read-only | current | The total number of prefixes advertised to this peer. When additional paths are enabled, routes with different path ID values count as different prefixes. This… |
| 1.2.826.1.3.1.4.1.74 | ColumnbgpPeerStatusConfigState | read-only | current | This field reports the state of the peer configuration. The peer configuration may be in one of the following states. - Up to date. That is, all configuration … |
| 1.2.826.1.3.1.4.1.75 | ColumnbgpPeerStatusConfedMember | read-only | current | The currently active value which indicates whether or not the peer is a member of the same confederation that this router is in. This value may be different fr… |
| 1.2.826.1.3.1.4.1.76 | ColumnbgpPeerStatusReflectorClient | read-only | current | The currently active value which indicates whether the given peer is a reflector client of this router, or not. This value may be different from the current pe… |
| 1.2.826.1.3.1.4.1.77 | ColumnbgpPeerStatusTrapEstab | read-only | current | The currently active value which indicates whether or not the Established trap is used. This value may be different from the current peer MIB value (bgpPeerTra… |
| 1.2.826.1.3.1.4.1.78 | ColumnbgpPeerStatusTrapBackw | read-only | current | The currently active value which indicates whether or not the Backward Transition trap is used. This value may be different from the current peer MIB value (bg… |
| 1.2.826.1.3.1.4.1.79 | ColumnbgpPeerStatusConnectRetryInt | read-only | current | The currently active time interval for the ConnectRetry timer. This value may be different from the current peer MIB value (bgpPeerConnectRetryInterval) if the… |
| 1.2.826.1.3.1.4.1.80 | ColumnbgpPeerStatusConfigPassive | read-only | current | The current active passive flag. If TRUE, then no outbound connections will be initiated, and only incoming connections will be accepted. If FALSE, then outbou… |
| 1.2.826.1.3.1.4.1.81 | ColumnbgpPeerStatusConfigOpenDelay | read-only | current | The currently active delay to enforce in between a TCP connection with this peer becoming established and a BGP Open message being sent. This value may be diff… |
| 1.2.826.1.3.1.4.1.82 | ColumnbgpPeerStatusConfigIdleHold | read-only | current | The currently active time to hold this peer in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it. This value ma… |
| 1.2.826.1.3.1.4.1.83 | ColumnbgpPeerStatusTtl | read-only | current | The currently active Time To Live used by the connection on this peer. This value may be different from the current peer MIB value (bgpPeerTtl) if the peer tak… |
| 1.2.826.1.3.1.4.1.84 | ColumnbgpPeerStatusConfAltLocalAs | read-only | current | The currently active alternative local AS number that can be used to establish a session with this peer. This is used when merging two ASs into a single AS. Th… |
| 1.2.826.1.3.1.4.1.85 | ColumnbgpPeerStatusConfAltLocalAsMode | read-only | current | The currently active AS number mode. This value may be different from the current peer MIB value (bgpPeerConfAltLocalAsMode) if the peer takes its value from a… |
| 1.2.826.1.3.1.4.1.86 | ColumnbgpPeerStatusDisableRouteRefresh | read-only | current | The currently active disable route refresh flag. This indicates whether DC-BGP should advertise support for Route Refresh messages to this peer. This value may… |
| 1.2.826.1.3.1.4.1.87 | ColumnbgpPeerStatusBfdDesired | read-only | current | The currently active flag which indicates whether Bidirectional Forwarding Detection (BFD) is desired for this peer. This value may be different from the curre… |
| 1.2.826.1.3.1.4.1.88 | ColumnbgpPeerStatusHoldTimeConfigd | read-only | current | The currently active time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value may be different from the current pe… |
| 1.2.826.1.3.1.4.1.89 | ColumnbgpPeerStatusKeepAliveConfigd | read-only | current | The currently active time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. This value may be different from the current pe… |
| 1.2.826.1.3.1.4.1.90 | ColumnbgpPeerStatusEbgpBandwidth | read-only | current | The bandwidth in bytes per second reported for the interface to the peer. This may be zero, indicating unknown or unused, for a number of reasons. - The peer i… |
| 1.2.826.1.3.1.4.1.91 | ColumnbgpPeerStatusLastErrorDir | read-only | current | This indicates whether the last error is due to local or remote node. |
| 1.2.826.1.3.1.4.1.92 | ColumnbgpPeerStatusLastConnUpTimeStamp | read-only | current | This indicates the last connection up timestamp. |
| 1.2.826.1.3.1.4.1.93 | ColumnbgpPeerStatusLastConnDownTimeStamp | read-only | current | This indicates the last connection down timestamp. |
| 1.2.826.1.3.1.4.1.94 | ColumnbgpPeerStatusHistoryError | read-only | current | This indicates the history error code. |
| 1.2.826.1.3.1.4.1.95 | ColumnbgpPeerStatusHistoryErrorDir | read-only | current | This indicates whether the history error is due to local or remote node. |
| 1.2.826.1.3.1.4.1.96 | ColumnbgpPeerStatusHistoryConnUpTimeStamp | read-only | current | This indicates the history connection up timestamp. |
| 1.2.826.1.3.1.4.1.97 | ColumnbgpPeerStatusHistoryConnDownTimeStamp | read-only | current | This indicates the history connection down timestamp. |
| 1.2.826.1.3.1.4.1.98 | ColumnbgpPeerStatusRemovePrivate | read-only | current | Whether private AS numbers are removed from the AS path before sending an update to this peer. This is only relevant for an eBGP peer. |
| 1.2.826.1.3.1.4.1.99 | ColumnbgpPeerStatusAsOverride | read-only | current | Whether Neighbor AS numbers are replaced with the local AS number from the AS path before sending an update to this peer. This is only relevant for an eBGP pee… |
| 1.2.826.1.3.1.4.1.100 | ColumnbgpPeerStatusRstrStaleNlri | read-only | current | The address and subaddress families for which the peer supports graceful restart and has stale nlri. This field is set to zero before an Open message has been … |
| 1.2.826.1.3.1.4.1.101 | ColumnbgpPeerStatusBranchName | read-only | current | This indicates the Branch Name of the Peer. |
| 1.2.826.1.3.1.4.1.102 | ColumnbgpPeerStatusLastErrRcvdTimeStamp | read-only | current | This indicates the last error recieved timestamp. |
| 1.2.826.1.3.1.4.1.103 | ColumnbgpPeerStatusLastErrSentTimeStamp | read-only | current | This indicates the last error sent timestamp. |
| 1.2.826.1.3.1.4.1.104 | ColumnbgpPeerStatusResendAllRoutes | read-create | current | Set this to 'true' to trigger BGP to re-send all routes to the peer. If the peer supports enhanced route refresh, then the routes will be sent as an unsolicite… |
| 1.2.826.1.3.1.4.1.105 | ColumnbgpPeerStatusOutUpdateElpsTime | read-only | current | Elapsed time in seconds since the last BGP UPDATE message was sent to this peer. Each time bgpPeerStatusOutUpdates is incremented, the value of this object is … |
| 1.2.826.1.3.1.4.1.106 | ColumnbgpPeerStatusOutPrfxesDenied | read-only | current | This is the number of prefixes in the Loc-RIB that have have failed export policy checks and so have not been installed in the Adj-RIB-Out for this peer. |
| 1.2.826.1.3.1.4.1.107 | ColumnbgpPeerStatusOutPrfxesImpWdr | read-only | current | The total number of routes for which an implicit withdraw has been sent to this peer. A route is implicitly withdrawn if a replacement route with the same NLRI… |
| 1.2.826.1.3.1.4.1.108 | ColumnbgpPeerStatusOutPrfxesExpWdr | read-only | current | The total number of routes for which an explicit withdraw has been sent to this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUT… |
| 1.2.826.1.3.1.4.1.109 | ColumnbgpPeerStatusInPrfxesImpWdr | read-only | current | The total number of routes that have been implicitly withdrawn by this peer. A route is implicitly withdrawn if a replacement route with the same NLRI is recei… |
| 1.2.826.1.3.1.4.1.110 | ColumnbgpPeerStatusInPrfxesExpWdr | read-only | current | The total number of routes that have been explicitly withdrawn by this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUTES field … |
| 1.2.826.1.3.1.4.1.111 | ColumnbgpPeerStatusReceivedHoldTime | read-only | current | The Hold Time value received in the OPEN message from this peer. A value of zero indicates that no Hold Time has been received from the peer. |
| 1.2.826.1.3.1.4.1.112 | ColumnbgpPeerStatusSelRemoteAddrType | read-only | current | The address family of the remote address used by the transport connection for the peering session. If the type is unknown then it is not possible to establish … |
| 1.2.826.1.3.1.4.1.113 | ColumnbgpPeerStatusSelRemoteAddr | read-only | current | The remote address used by the transport connection for the peering session. If no address is selected then it is not possible to establish a connection to the… |
| 1.2.826.1.3.1.5 | TablebgpPeerAfiSafiStatusTable | not-accessible | current | BGP peer <AFI, SAFI> status table. This table allows a user to control BGP peer AFI/SAFI operations. In future this table may also report BGP peer AFI/SAFI sta… |
| 1.2.826.1.3.1.5.1 | RowbgpPeerAfiSafiStatusEntry | not-accessible | current | Entry containing information about the status of a BGP peer for a particular AFI/SAFI. |
| 1.2.826.1.3.1.5.1.11 | ColumnbgpPeerAfiSafiStRtRefresh | read-create | current | Set this to 'true' to trigger BGP to send a Route Refresh request to the peer for this AFI/SAFI. Setting this field will only have an effect if a BGP session t… |
| 1.2.826.1.3.1.5.1.12 | ColumnbgpPeerAfiSafiStAddPathCapNeg | read-only | current | The BGP additional path capability negotiated with this peer for this AFI/SAFI. Valid values are: - AMB_BGP_ADD_PATH_SR_DISABLE Disable sending and receiving a… |
| 1.2.826.1.3.1.5.1.13 | ColumnbgpPeerAfiSafiStReflectorClient | read-only | current | The currently active value which indicates whether the given peer is a reflector client of this router for this AFI/SAFI, or not. This value may be different f… |
| 1.2.826.1.3.1.5.1.14 | ColumnbgpPeerAfiSafiStUpdateGroup | read-only | current | The index of the update group that the peer is a member of for this AFI/SAFI. Zero if the peer is not a member of an update group. |
| 1.2.826.1.3.1.5.1.15 | ColumnbgpPeerAfiSafiStResendAllRoutes | read-create | current | Set this to 'true' to trigger BGP to re-send all routes to the peer for this AFI/SAFI. If the peer supports enhanced route refresh, then this will be sent as a… |
| 1.2.826.1.3.1.6 | TablebgpPeerDebugTable | not-accessible | current | BGP peer debug table. This table allows a user to control BGP peer debug operations. This table contains entries for both configured and dynamic peers. Rows in… |
| 1.2.826.1.3.1.6.1 | RowbgpPeerDebugEntry | not-accessible | current | Entry containing information about the status of a BGP peer debug flags. |
| 1.2.826.1.3.1.6.1.2 | ColumnbgpPeerDebugAddrType | not-accessible | current | The address family of the remote address prefix. Valid values are: ipv4 and ipv6. Type ipv6 is only accepted if bgpRmEntSupportIpv6 is TRUE. |
| 1.2.826.1.3.1.6.1.3 | ColumnbgpPeerDebugAddr | read-write | current | This field is used to set peer ip for setting debug flags. |
| 1.2.826.1.3.1.6.1.4 | ColumnbgpPeerDebugRowStatus | read-create | current | The row status for this peer range table entry, used to create and destroy table entries. |
| 1.2.826.1.3.1.6.1.5 | ColumnbgpPeerDebugDebug | read-write | current | This field is used to set debug flags of BGP Peer. |
| 1.2.826.1.3.1.6.1.6 | ColumnbgpPeerDebugLevel | read-write | current | This field is used to set debug level of BGP Peer. |
| 1.2.826.1.3.1.6.1.7 | ColumnbgpPeerDebugAllFlagsEnabled | read-write | current | This field is used to determine all flags enabled. |
| 1.2.826.1.3.1.6.1.8 | ColumnbgpPeerDebugRxTxFlagsEnabled | read-write | current | This field is used to determine rx/tx flags enabled. |
| 1.2.826.1.3.2 | NodebgpPeerCaps | |||
| 1.2.826.1.3.2.1 | TablebgpPeerCapsRcvdTable | not-accessible | current | This table contains contains the capabilities that are supported for a given peer. It is equivalent to the bgpM2PeerCapsReceivedTable. |
| 1.2.826.1.3.2.1.1 | RowbgpPeerCapsRcvdEntry | not-accessible | current | These entries are keyed by a peer index and the BGP Capability Code and index. |
| 1.2.826.1.3.2.1.1.3 | ColumnbgpPeerCapRcvdCode | not-accessible | current | The BGP Capability Advertisement Capability Code. |
| 1.2.826.1.3.2.1.1.4 | ColumnbgpPeerCapRcvdIndex | not-accessible | current | Multiple instances of a given capability may be sent by a BGP speaker. This variable is used to index them. |
| 1.2.826.1.3.2.1.1.5 | ColumnbgpPeerCapRcvdValue | read-only | current | The value of the announced capability. |
| 1.2.826.1.3.2.2 | TablebgpPeerCapsSentTable | not-accessible | current | This table contains contains the capabilities that are announced to a given peer. It is equivalent to the bgpM2PeerCapsAnnouncedTable. |
| 1.2.826.1.3.2.2.1 | RowbgpPeerCapsSentEntry | not-accessible | current | These entries are keyed by a peer index and the BGP Capability Code and index. |
| 1.2.826.1.3.2.2.1.3 | ColumnbgpPeerCapSentCode | not-accessible | current | The BGP Capability Advertisement Capability Code. |
| 1.2.826.1.3.2.2.1.4 | ColumnbgpPeerCapSentIndex | not-accessible | current | Multiple instances of a given capability may be sent by a BGP speaker. This variable is used to index them. |
| 1.2.826.1.3.2.2.1.5 | ColumnbgpPeerCapSentValue | read-only | current | The value of the announced capability. |
| 1.2.826.1.3.3 | NodebgpPeerCntrs | |||
| 1.2.826.1.3.3.1 | TablebgpPrfxCntrsTable | not-accessible | current | Additional per-peer, per AFI/SAFI counters for prefixes. It is equivalent to the bgpM2PrefixCountersTable. |
| 1.2.826.1.3.3.1.1 | RowbgpPrfxCntrsEntry | not-accessible | current | Entry containing information about a bgp-peer's prefix counters. |
| 1.2.826.1.3.3.1.1.3 | ColumnbgpPrfxCntrsAfi | not-accessible | current | The AFI index of the per-peer, per prefix counters. |
| 1.2.826.1.3.3.1.1.4 | ColumnbgpPrfxCntrsSafi | not-accessible | current | The SAFI index of the per-peer, per prefix counters. |
| 1.2.826.1.3.3.1.1.5 | ColumnbgpPrfxInPrfxes | read-only | current | The number of prefixes received from a peer and are stored in the Adj-RIB-In for that peer. When additional paths are enabled, routes with different path ID va… |
| 1.2.826.1.3.3.1.1.6 | ColumnbgpPrfxInPrfxesAccepted | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and are eligible to become active in the Loc-Rib. When additional paths are enabled, rou… |
| 1.2.826.1.3.3.1.1.7 | ColumnbgpPrfxInPrfxesRejected | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and are NOT eligible to become active in the Loc-Rib. When additional paths are enabled,… |
| 1.2.826.1.3.3.1.1.8 | ColumnbgpPrfxOutPrfxes | read-only | current | The number of prefixes for a peer that are installed in that peer's Adj-RIB-Out. When additional paths are enabled, routes with different path ID values count … |
| 1.2.826.1.3.3.1.1.9 | ColumnbgpPrfxOutPrfxesAdvertised | read-only | current | The number of advertised prefixes currently associated with the peer. When additional paths are enabled, routes with different path ID values count as differen… |
| 1.2.826.1.3.3.1.1.10 | ColumnbgpPrfxCntrsUserData | read-only | current | User data for this BGP prefix counters entry. |
| 1.2.826.1.3.3.1.1.11 | ColumnbgpPrfxInPrfxesFlapped | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and for which RIB Manager is tracking a route flap damping penalty. When additional path… |
| 1.2.826.1.3.3.1.1.12 | ColumnbgpPrfxInPrfxesFlapSuppressed | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and that are suppressed as a result of route flapping. When additional paths are enabled… |
| 1.2.826.1.3.3.1.1.13 | ColumnbgpPrfxInPrfxesFlapHistory | read-only | current | The number of prefixes for a peer that are not currently in the Adj-RIB-In, but which have an associated route flap damping penalty. When additional paths are … |
| 1.2.826.1.3.3.1.1.14 | ColumnbgpPrfxInPrfxesActive | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and are marked as 'active' in the Loc-Rib. When additional paths are enabled, routes wit… |
| 1.2.826.1.3.3.1.1.15 | ColumnbgpPrfxInPrfxesDeniedByPol | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, because of local filter policy. This does not track wheth… |
| 1.2.826.1.3.3.1.1.16 | ColumnbgpPrfxNumLocRibRoutes | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and included in the Loc-RIB. When additional paths are enabled, routes with different pa… |
| 1.2.826.1.3.3.1.1.17 | ColumnbgpPrfxNumLocRibBestRoutes | read-only | current | The number of prefixes for a peer that are installed in the Adj-RIB-In and included in the Loc-RIB as 'best' routes. This does not include additional paths or … |
| 1.2.826.1.3.3.1.1.18 | ColumnbgpPrfxInPrfxesDeniedMartian | read-only | current | The number of times a received Martian prefix has been denied and therefore not installed in the Adj-RIB-In. When additional paths are enabled, routes with dif… |
| 1.2.826.1.3.3.1.1.19 | ColumnbgpPrfxInPrfxesDeniedAsLoop | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, due to loops as determined by the AS Path. When additiona… |
| 1.2.826.1.3.3.1.1.20 | ColumnbgpPrfxInPrfxesDeniedNextHop | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, because the next hop is invalid. The next hop is invalid … |
| 1.2.826.1.3.3.1.1.21 | ColumnbgpPrfxInPrfxesDeniedAsLength | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, because the AS Path length is too long. The AS Path lengt… |
| 1.2.826.1.3.3.1.1.22 | ColumnbgpPrfxInPrfxesDeniedCommunity | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, due to well-known community checks. This applies to route… |
| 1.2.826.1.3.3.1.1.23 | ColumnbgpPrfxInPrfxesDeniedLocalOrig | read-only | current | The number of times a received prefix has been denied, and therefore not installed in the Adj-RIB-In, because it is locally originated. When additional paths a… |
| 1.2.826.1.3.3.1.1.24 | ColumnbgpPrfxInTotalPrfxes | read-only | current | The total number of prefixes learned from all sessions with this peer. When a session fails, the value in this counter persists and will be reported even thoug… |
| 1.2.826.1.3.3.1.1.25 | ColumnbgpPrfxOutTotalPrfxes | read-only | current | The total number of prefixes sent on all sessions with this peer. When a session fails, the value in this counter persists and will be reported even thought th… |
| 1.2.826.1.3.3.1.1.26 | ColumnbgpPrfxPeerState | read-only | current | The BGP peer's FSM state. This allows the user to filter on results for sessions that are active. |
| 1.2.826.1.3.3.1.1.27 | ColumnbgpPrfxOutPrfxesDenied | read-only | current | This is the number of prefixes in the Loc-RIB that have have failed export policy checks and so have not been installed in the Adj-RIB-Out. |
| 1.2.826.1.3.3.1.1.28 | ColumnbgpPrfxOutPrfxesImpWdr | read-only | current | The total number of routes for which an implicit withdraw has been sent to this peer. A route is implicitly withdrawn if a replacement route with the same NLRI… |
| 1.2.826.1.3.3.1.1.29 | ColumnbgpPrfxOutPrfxesExpWdr | read-only | current | The total number of routes for which an explicit withdraw has been sent to this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUT… |
| 1.2.826.1.3.3.1.1.30 | ColumnbgpPrfxInPrfxesImpWdr | read-only | current | The total number of routes that have been implicitly withdrawn by this peer. A route is implicitly withdrawn if a replacement route with the same NLRI is recei… |
| 1.2.826.1.3.3.1.1.31 | ColumnbgpPrfxInPrfxesExpWdr | read-only | current | The total number of routes that have been explicitly withdrawn by this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUTES field … |
| 1.2.826.1.3.3.1.1.32 | ColumnbgpPrfxCurPrfxesDeniedByPol | read-only | current | When 'soft reset with stored routing information' is enabled for a peer with the given AFI/SAFI, this is the number of stored prefixes from the peer that have … |
| 1.2.826.1.4 | NodebgpRib | |||
| 1.2.826.1.4.1 | TablebgpNlriTable | not-accessible | current | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers and AFMs, along with locally conf… |
| 1.2.826.1.4.1.1 | RowbgpNlriEntry | not-accessible | current | Information about a path to a network. |
| 1.2.826.1.4.1.1.2 | ColumnbgpNlriPeerOrAfm | not-accessible | current | Whether this route was learned from a BGP peer or an AFM, or was created by BGP itself. |
| 1.2.826.1.4.1.1.3 | ColumnbgpNlriPeerAfmIndex | not-accessible | current | The index of either the BGP peer or AFM this route was learned from. If bgpNlriPeerOrAfm is peer, this field is equivalent to a bgpPeerStatusPeerIndex. If bgpN… |
| 1.2.826.1.4.1.1.4 | ColumnbgpNlriAfi | not-accessible | current | The address family of the prefix for this NLRI. |
| 1.2.826.1.4.1.1.5 | ColumnbgpNlriSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI. |
| 1.2.826.1.4.1.1.6 | ColumnbgpNlriPrfx | not-accessible | current | An address prefix in the Network Layer Reachability Information field. The prefix length is specified by bgpNlriPrfxLen. Any bits beyond the length specified b… |
| 1.2.826.1.4.1.1.7 | ColumnbgpNlriPrfxLen | not-accessible | current | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| 1.2.826.1.4.1.1.8 | ColumnbgpNlriBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route. |
| 1.2.826.1.4.1.1.9 | ColumnbgpNlriAsSize | read-only | current | Whether the bgpNlriASPathStr field contains two or four byte AS numbers. |
| 1.2.826.1.4.1.1.10 | ColumnbgpNlriASPathStr | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. If bgpRmEntAsSize is four-octet and… |
| 1.2.826.1.4.1.1.11 | ColumnbgpPathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.2.826.1.4.1.1.12 | ColumnbgpPathAttrNextHop | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The … |
| 1.2.826.1.4.1.1.13 | ColumnbgpPathAttrMultiExitDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpPathAttrMEDPrsnt is TRUE. |
| 1.2.826.1.4.1.1.14 | ColumnbgpPathAttrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route. |
| 1.2.826.1.4.1.1.15 | ColumnbgpPathAttrAtomicAggregate | read-only | current | When this object is set to AMB_BGP_ATOMIC_AGGR_PRESENT, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specif… |
| 1.2.826.1.4.1.1.16 | ColumnbgpPathAttrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. |
| 1.2.826.1.4.1.1.17 | ColumnbgpPathAttrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of zero indicates the absence of this attribute. Note propagation of AS of ze… |
| 1.2.826.1.4.1.1.18 | ColumnbgpPathAttrCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. |
| 1.2.826.1.4.1.1.19 | ColumnbgpPathAttrOrigId | read-only | current | The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attr… |
| 1.2.826.1.4.1.1.20 | ColumnbgpPathAttrWeight | read-only | current | The local degree of preference assigned to this route. |
| 1.2.826.1.4.1.1.21 | ColumnbgpFlapStatsConfig | read-only | current | The index of the route flap configuration table entry containing the settings being applied to this route for dampening. |
| 1.2.826.1.4.1.1.22 | ColumnbgpFlapStatsPenalty | read-only | current | The current penalty value of this route. If it is greater than the cutoff threshold the route is suppressed. |
| 1.2.826.1.4.1.1.23 | ColumnbgpFlapStatsFlapcnt | read-only | current | The number of times this route has flapped since statistics were last cleared. |
| 1.2.826.1.4.1.1.24 | ColumnbgpFlapStatsSupprsd | read-only | current | Whether or not this route is suppressed. |
| 1.2.826.1.4.1.1.25 | ColumnbgpFlapStatsTimeleft | read-only | current | The time left until this route is no longer suppressed. Only valid if the route is suppressed. |
| 1.2.826.1.4.1.1.26 | ColumnbgpFlapStatsCleardamp | read-create | current | This value is set to TRUE to clear all the damping information of this route, and unsuppress it if it is suppressed. Specifically the following fields are clea… |
| 1.2.826.1.4.1.1.27 | ColumnbgpFlapStatsClearstat | read-create | current | Set this field to 'true' to clear just the bgpFlapStatsFlapcnt field. This will not unsuppress a suppressed route. Reading the value of this field has no meani… |
| 1.2.826.1.4.1.1.28 | ColumnbgpNlriEcmp | read-only | current | Whether or not this route was installed into the Forwarding Table as an ECMP route (it may or may not be the best BGP4 route advertised to BGP peers). |
| 1.2.826.1.4.1.1.29 | ColumnbgpPathAttrAsPathLimAs | read-only | current | The AS number of the speaker that attached the AS_PATHLIMIT attribute. A value of 0 indicates the absence of this attribute. Note that propagation of AS of zer… |
| 1.2.826.1.4.1.1.30 | ColumnbgpPathAttrAsPathLimUpper | read-only | current | The upper bound on the number of ASes in the AS_PATH associated with this route before the route will be filtered. Only valid if bgpPathAttrAsPathLimAs is non-… |
| 1.2.826.1.4.1.1.31 | ColumnbgpNlriIsActive | read-only | current | An indication of whether or not this route is installed in the forwarding table. If bgpRmAfiSafiAdvertiseInactive is set to 'false', then this is set to - 'act… |
| 1.2.826.1.4.1.1.32 | ColumnbgpNlriUserData | read-only | current | User data for this BGP NLRI entry. |
| 1.2.826.1.4.1.1.33 | ColumnbgpNlriStale | read-only | current | Whether or not this route was last sent by the peer before BGP detected that the peer was restarting. If the route is not re-advertised by the peer before the … |
| 1.2.826.1.4.1.1.34 | ColumnbgpNlriFlapStartTime | read-only | current | The value of sysUpTime when this route first flapped. This field is only valid if bgpFlapStatsPenalty is non-zero. |
| 1.2.826.1.4.1.1.35 | ColumnbgpNlriLinkLocalNextHop | read-only | current | The IPv6 link-local address of the border router that should be used to access the destination network. This object is only valid for a prefix with a received … |
| 1.2.826.1.4.1.1.36 | ColumnbgpPathAttrMEDPrsnt | read-only | current | If true, then the route has an associated MED attribute, whose value is given in bgpPathAttMultiExitDisc. If false, the route has no MED attribute, and the val… |
| 1.2.826.1.4.1.1.37 | ColumnbgpNlriPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.1.1.38 | ColumnbgpNlriHistory | read-only | current | If true, then the route is a history route. If false it is current. |
| 1.2.826.1.4.1.1.39 | ColumnbgpNlriPmsi | read-only | current | This field contains the full line format of the PMSI attribute value omitting the attribute header. Note that the value will be truncated if it exceeds the max… |
| 1.2.826.1.4.1.1.40 | ColumnbgpNlriPmsiActualLen | read-only | current | This field contains the actual length of the PMSI attribute. If the PMSI attribute value has been truncated this gives the true length. |
| 1.2.826.1.4.1.1.41 | ColumnbgpPathAttrAdminDistance | read-only | current | The admin distance of the BGP route used as a tie-breaker in RTM |
| 1.2.826.1.4.1.1.42 | ColumnbgpNlriReasonNotBest | read-only | current | If bgpNlriBest is 'true', then this field is set to 'routeIsBest'. Otherwise, it reports the stage in the decision process when the route was determined to be … |
| 1.2.826.1.4.1.1.43 | ColumnbgpNlriPeerType | read-only | current | If bgpNlriPeerOrAfm is peer, this field indicates whether the source peer is an iBGP or eBGP peer. If bgpNlriPeerOrAfm is afm, this field is set to 'none'. |
| 1.2.826.1.4.1.1.44 | ColumnbgpNlriRemoteAddrType | read-only | current | The address family of the address of the BGP peer that this route was learned from. This field is only valid if bgpNlriPeerOrAfm is peer. This field is equival… |
| 1.2.826.1.4.1.1.45 | ColumnbgpNlriRemoteAddr | read-only | current | The address of the BGP peer that this route was learned from. This field is only valid if bgpNlriPeerOrAfm is peer. This field is equivalent to bgpPeerRemoteAd… |
| 1.2.826.1.4.1.1.46 | ColumnbgpNlriRemoteAddrScopeId | read-only | current | The scope ID of the BGP peer address. This field is only valid if bgpNlriPeerOrAfm is peer. This field is equivalent to bgpPeerLocalAddrScopeId. |
| 1.2.826.1.4.1.1.47 | ColumnbgpNlriAggrType | read-only | current | This object indicates any aggregation processing that has been applied to this route. A value of noAggregation(1) indicates that this route does not aggregate … |
| 1.2.826.1.4.1.1.48 | ColumnbgpNlriOutputInterface | read-only | current | The output interface. This field is only non-zero for routes received with a link-local IPv6 next hop from directly connected peers. |
| 1.2.826.1.4.1.1.49 | ColumnbgpNlriCommunities | read-only | current | The community membership associated with the route after import policy has been applied. Each community is four-octets in length and each community follows the… |
| 1.2.826.1.4.1.1.50 | ColumnbgpNlriExtCommunities | read-only | current | The extended community membership associated with the route after import policy has been applied. Each extended community is eight-octets in length and each ex… |
| 1.2.826.1.4.1.1.51 | ColumnbgpNlriPathAttrAuxData | read-only | current | The auxilliary data of the route with format specific to AFI/SAFI |
| 1.2.826.1.4.2 | TablebgpPathAttrUnknownTable | not-accessible | current | The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP … |
| 1.2.826.1.4.2.1 | RowbgpPathAttrUnknownEntry | not-accessible | current | Information about an unknown attribute provided with a path to a network. |
| 1.2.826.1.4.2.1.8 | ColumnbgpPathAttrUnknownType | not-accessible | current | The attribute type advertised with this unknown attribute by the peer. This is the one octet type code field and does not include the attribute flags. These ar… |
| 1.2.826.1.4.2.1.9 | ColumnbgpPathAttrUnknownValue | read-only | current | Value of path attribute not understood by the base BGP-4 document. This will begin with the flags, code and length. Note that only unknown optional-transitive … |
| 1.2.826.1.4.2.1.10 | ColumnbgpPathAttrUnknownUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3 | NodebgpPathAttrExtensions | |||
| 1.2.826.1.4.3.1 | NodebgpPathAttrNonCapExts | |||
| 1.2.826.1.4.3.1.1966 | NodebgpPathAttrRouteReflectionExts | |||
| 1.2.826.1.4.3.1.1966.2 | TablebgpPathAttrClusterTable | not-accessible | current | The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data fo… |
| 1.2.826.1.4.3.1.1966.2.1 | RowbgpPathAttrClusterEntry | not-accessible | current | Information about a cluster traversal provided with a path to a network. |
| 1.2.826.1.4.3.1.1966.2.1.8 | ColumnbgpPathAttrClusterIndex | not-accessible | current | An integral index for a row in this table. |
| 1.2.826.1.4.3.1.1966.2.1.9 | ColumnbgpPathAttrClusterValue | read-only | current | A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster th… |
| 1.2.826.1.4.3.1.1966.2.1.10 | ColumnbgpPathAttrClusterUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.1966.3 | TablebgpRcvdPathAttrClusterTable | not-accessible | current | The BGP-4 Received Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of ro… |
| 1.2.826.1.4.3.1.1966.3.1 | RowbgpRcvdPathAttrClusterEntry | not-accessible | current | Information about a cluster traversal provided with a path to a network. |
| 1.2.826.1.4.3.1.1966.3.1.7 | ColumnbgpRcvdPathAttrClusterIndex | not-accessible | current | An integral index for a row in this table. |
| 1.2.826.1.4.3.1.1966.3.1.8 | ColumnbgpRcvdPathAttrClusterValue | read-only | current | A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster th… |
| 1.2.826.1.4.3.1.1966.3.1.9 | ColumnbgpRcvdPathAttrClusterUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.1966.3.1.10 | ColumnbgpRcvdPathAttrClusterPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.3.1.1966.4 | TablebgpAROPathAttrClusterTable | not-accessible | current | The BGP-4 ARO Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row dat… |
| 1.2.826.1.4.3.1.1966.4.1 | RowbgpAROPathAttrClusterEntry | not-accessible | current | Information about a cluster traversal provided with a path to a network. |
| 1.2.826.1.4.3.1.1966.4.1.7 | ColumnbgpAROPathAttrClusterIndex | not-accessible | current | An integral index for a row in this table. |
| 1.2.826.1.4.3.1.1966.4.1.8 | ColumnbgpAROPathAttrClusterValue | read-only | current | A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster th… |
| 1.2.826.1.4.3.1.1966.4.1.9 | ColumnbgpAROPathAttrClusterUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.1997 | NodebgpPathAttrCommunityExts | |||
| 1.2.826.1.4.3.1.1997.1 | TablebgpPathAttrCommTable | not-accessible | current | The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data… |
| 1.2.826.1.4.3.1.1997.1.1 | RowbgpPathAttrCommEntry | not-accessible | current | Information about a community association provided with a path to a network. |
| 1.2.826.1.4.3.1.1997.1.1.8 | ColumnbgpPathAttrCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.1997.1.1.9 | ColumnbgpPathAttrCommValue | read-only | current | A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics. |
| 1.2.826.1.4.3.1.1997.1.1.10 | ColumnbgpPathAttrCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.1997.2 | TablebgpRcvdPathAttrCommTable | not-accessible | current | The BGP-4 Received Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of… |
| 1.2.826.1.4.3.1.1997.2.1 | RowbgpRcvdPathAttrCommEntry | not-accessible | current | Information about a community association provided with a path to a network. |
| 1.2.826.1.4.3.1.1997.2.1.7 | ColumnbgpRcvdPathAttrCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.1997.2.1.8 | ColumnbgpRcvdPathAttrCommValue | read-only | current | A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics. |
| 1.2.826.1.4.3.1.1997.2.1.9 | ColumnbgpRcvdPathAttrCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.1997.2.1.10 | ColumnbgpRcvdPathAttrCommPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.3.1.1997.3 | TablebgpAROPathAttrCommTable | not-accessible | current | The BGP-4 ARO Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row … |
| 1.2.826.1.4.3.1.1997.3.1 | RowbgpAROPathAttrCommEntry | not-accessible | current | Information about a community association provided with a path to a network. |
| 1.2.826.1.4.3.1.1997.3.1.7 | ColumnbgpAROPathAttrCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.1997.3.1.8 | ColumnbgpAROPathAttrCommValue | read-only | current | A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics. |
| 1.2.826.1.4.3.1.1997.3.1.9 | ColumnbgpAROPathAttrCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.2547 | NodebgpPathAttrExtCommunityExts | |||
| 1.2.826.1.4.3.1.2547.1 | TablebgpPathAttrExtCommTable | not-accessible | current | The BGP-4 Path Attribute Extended Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The a… |
| 1.2.826.1.4.3.1.2547.1.1 | RowbgpPathAttrExtCommEntry | not-accessible | current | Information about an extended community association provided with a path to a network. |
| 1.2.826.1.4.3.1.2547.1.1.8 | ColumnbgpPathAttrExtCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.2547.1.1.9 | ColumnbgpPathAttrExtCommValue | read-only | current | A value representing an extended community. There are certain 8-octet long values which could be returned in this columnar row data that carry additional seman… |
| 1.2.826.1.4.3.1.2547.1.1.10 | ColumnbgpPathAttrExtCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.2547.2 | TablebgpRcvdPathAttrExtCommTable | not-accessible | current | The BGP-4 Received Path Attribute Extended Community Table contains the per network path (NLRI) data on the extended community membership advertised with a rou… |
| 1.2.826.1.4.3.1.2547.2.1 | RowbgpRcvdPathAttrExtCommEntry | not-accessible | current | Information about an extended community association provided with a path to a network. |
| 1.2.826.1.4.3.1.2547.2.1.7 | ColumnbgpRcvdPathAttrExtCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.2547.2.1.8 | ColumnbgpRcvdPathAttrExtCommValue | read-only | current | A value representing an extended community. There are certain 8-octet long values which could be returned in this columnar row data that carry additional seman… |
| 1.2.826.1.4.3.1.2547.2.1.9 | ColumnbgpRcvdPathAttrExtCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.1.2547.2.1.10 | ColumnbgpRcvdPathAttrExtCommPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.3.1.2547.3 | TablebgpAROPathAttrExtCommTable | not-accessible | current | The BGP-4 ARO Path Attribute Extended Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. T… |
| 1.2.826.1.4.3.1.2547.3.1 | RowbgpAROPathAttrExtCommEntry | not-accessible | current | Information about an extended community association provided with a path to a network. |
| 1.2.826.1.4.3.1.2547.3.1.7 | ColumnbgpAROPathAttrExtCommIndex | not-accessible | current | An integer index for a row in this table. |
| 1.2.826.1.4.3.1.2547.3.1.8 | ColumnbgpAROPathAttrExtCommValue | read-only | current | A value representing an extended community. There are certain 8-octet long values which could be returned in this columnar row data that carry additional seman… |
| 1.2.826.1.4.3.1.2547.3.1.9 | ColumnbgpAROPathAttrExtCommUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.3.2 | NodebgpPathAttrCapExts | |||
| 1.2.826.1.4.4 | TablebgpAdjRibOutTable | not-accessible | current | The BGP Adj-RIB-Out Table contains the set of routes advertised to each peer. |
| 1.2.826.1.4.4.1 | RowbgpAdjRibOutEntry | not-accessible | current | Information about a path to a network that has been advertised to a peer. The route has been explicitly advertised in an UPDATE message sent to the peer, unles… |
| 1.2.826.1.4.4.1.3 | ColumnbgpAdjRibOutAfi | not-accessible | current | The address family of the prefix for this Adj-RIB Out route. |
| 1.2.826.1.4.4.1.4 | ColumnbgpAdjRibOutSafi | not-accessible | current | The subsequent address family of the prefix for this Adj-RIB Out route. |
| 1.2.826.1.4.4.1.5 | ColumnbgpAdjRibOutPrfx | not-accessible | current | An address prefix in the Network Layer Reachability Information field for this Adj-RIB Out route. The prefix length is specified by bgpAdjRibOutPrfxLen. Any bi… |
| 1.2.826.1.4.4.1.6 | ColumnbgpAdjRibOutPrfxLen | not-accessible | current | Length in bits of the address prefix contained in the bgpAdjRibOutPrfx object. |
| 1.2.826.1.4.4.1.7 | ColumnbgpAdjRibOutAdvertStatus | read-only | current | This object indicates the current state of advertisement of the route to the peer. A value of advertised(1) indicates that the route has been advertised to the… |
| 1.2.826.1.4.4.1.8 | ColumnbgpAdjRibOutLocalAggrType | read-only | current | This object indicates any aggregation processing that has been applied to this Adj-RIB-Out route. A value of noAggregation(1) indicates that this route does no… |
| 1.2.826.1.4.4.1.9 | ColumnbgpAdjRibOutAsSize | read-only | current | Whether the bgpAdjRibOutASPathStr object contains two or four byte AS numbers. |
| 1.2.826.1.4.4.1.10 | ColumnbgpAdjRibOutASPathStr | read-only | current | This is a string containing the autonomous system path sent to this peer in the AS_PATH attribute for this Adj-RIB-Out route. If this path contains four-octet … |
| 1.2.826.1.4.4.1.11 | ColumnbgpAdjRibOutOrigin | read-only | current | The ultimate origin of the path information. |
| 1.2.826.1.4.4.1.12 | ColumnbgpAdjRibOutNextHop | read-only | current | The next hop address transmitted in the UPDATE packet. The address family of this object is the same as that of bgpAdjRibOutPrfx. Note that for RFC 2545 style … |
| 1.2.826.1.4.4.1.13 | ColumnbgpAdjRibOutMultiExitDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpAdjRibOutMEDPrsnt is TRUE. |
| 1.2.826.1.4.4.1.14 | ColumnbgpAdjRibOutLocalPref | read-only | current | The local preference for this Adj-RIB-Out route, as transmitted in the UPDATE message sent to the peer. |
| 1.2.826.1.4.4.1.15 | ColumnbgpAdjRibOutAtomicAggregate | read-only | current | When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute was included in the UPDATE sent to the peer for this Adj-RIB-Out route. |
| 1.2.826.1.4.4.1.16 | ColumnbgpAdjRibOutAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. |
| 1.2.826.1.4.4.1.17 | ColumnbgpAdjRibOutAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates that this attribute was not included in the UPDATE messa… |
| 1.2.826.1.4.4.1.18 | ColumnbgpAdjRibOutOrigId | read-only | current | The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attr… |
| 1.2.826.1.4.4.1.19 | ColumnbgpAdjRibOutAsLimAs | read-only | current | If non-zero this is the number of the AS that attached the AS_PATHLIMIT attribute. |
| 1.2.826.1.4.4.1.20 | ColumnbgpAdjRibOutAsLimUpper | read-only | current | The upper bound on the number of ASes in the AS_PATH attribute after which the route will be filtered. Only valid if bgpAdjRibOutAsLimAs is non-zero. |
| 1.2.826.1.4.4.1.21 | ColumnbgpAdjRibOutUserData | read-only | current | User data for this BGP ARO entry. |
| 1.2.826.1.4.4.1.22 | ColumnbgpAdjRibOutEcmp | read-only | current | Whether or not this route was installed into the Forwarding Table as an ECMP route. |
| 1.2.826.1.4.4.1.23 | ColumnbgpAdjRibOutStale | read-only | current | Whether or not this route was last sent by the peer before BGP detected that the peer was restarting. If the route is not re-advertised by the peer before the … |
| 1.2.826.1.4.4.1.24 | ColumnbgpAdjRibOutLinkLocalNextHop | read-only | current | The IPv6 link-local address sent in the UPDATE message. This object is only valid if an RFC 2545 style double nexthop was sent in the UPDATE. |
| 1.2.826.1.4.4.1.25 | ColumnbgpAdjRibOutMEDPrsnt | read-only | current | If true, then the route has an associated MED attribute, whose value is given in bgpAdjRibOutMultiExitDisc. If false, the route has no MED attribute, and the v… |
| 1.2.826.1.4.4.1.26 | ColumnbgpAdjRibOutPathId | not-accessible | current | The path ID for this Adj-RIB Out route. If BGP additional path send capability was negotiated with the peer for this AFI/SAFI then this is the path ID sent for… |
| 1.2.826.1.4.4.1.27 | ColumnbgpAdjRibOutLabel | read-only | current | The Out Label for this Adj-RIB Out route. If Inter-AS Option-B is supported, this is the label sent to upstream peers for this NLRI. Otherwise, the value is ze… |
| 1.2.826.1.4.4.1.28 | ColumnbgpAdjRibOutRemoteAddrType | read-only | current | The address family of the address of the BGP peer. This field is equivalent to bgpPeerRemoteAddrType. |
| 1.2.826.1.4.4.1.29 | ColumnbgpAdjRibOutRemoteAddr | read-only | current | The address of the BGP peer. This field is equivalent to bgpPeerRemoteAddr. |
| 1.2.826.1.4.4.1.30 | ColumnbgpAdjRibOutRemoteAddrScopeId | read-only | current | The scope ID of the BGP peer address. This field is equivalent to bgpPeerLocalAddrScopeId. |
| 1.2.826.1.4.4.1.31 | ColumnbgpAdjRibOutPmsi | read-only | current | This field contains the full line format of the PMSI attribute value omitting the attribute header. Note that the value will be truncated if it exceeds the max… |
| 1.2.826.1.4.4.1.32 | ColumnbgpAdjRibOutPmsiActualLen | read-only | current | This field contains the actual length of the PMSI attribute. If the PMSI attribute value has been truncated this gives the true length. |
| 1.2.826.1.4.4.1.33 | ColumnbgpAdjRibOutCommunities | read-only | current | The community membership associated with the route after export policy has been applied. Each community is four-octets in length and each community follows the… |
| 1.2.826.1.4.4.1.34 | ColumnbgpAdjRibOutExtCommunities | read-only | current | The extended community membership associated with the route after export policy has been applied. Each extended community is eight-octets in length and each ex… |
| 1.2.826.1.4.4.1.35 | ColumnbgpAdjRibOutAuxData | read-only | current | The auxilliary data of the route with format specific to AFI/SAFI |
| 1.2.826.1.4.5 | TablebgpNlriPrefixTable | not-accessible | current | This table contains information about paths to destination networks received from all BGP4 peers, along with locally configured aggregate routes. It provides t… |
| 1.2.826.1.4.5.1 | RowbgpNlriPrefixEntry | not-accessible | current | Information about a path to a network. |
| 1.2.826.1.4.5.1.2 | ColumnbgpNlriPrefixPeerOrAfm | not-accessible | current | Whether this route was learned from a BGP peer or an AFM, or was created by BGP itself. |
| 1.2.826.1.4.5.1.3 | ColumnbgpNlriPrefixPeerAfmIndex | not-accessible | current | The index of either the BGP peer or AFM this route was learned from. If bgpNlriPrefixPeerOrAfm is peer, this field is equivalent to a bgpPeerStatusPeerIndex. I… |
| 1.2.826.1.4.5.1.4 | ColumnbgpNlriPrefixAfi | not-accessible | current | The address family of the prefix for this NLRI. |
| 1.2.826.1.4.5.1.5 | ColumnbgpNlriPrefixSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI. |
| 1.2.826.1.4.5.1.6 | ColumnbgpNlriPrefixPrfx | not-accessible | current | An address prefix in the Network Layer Reachability Information field. The prefix length is specified by bgpNlriPrefixPrfxLen. Any bits beyond the length speci… |
| 1.2.826.1.4.5.1.7 | ColumnbgpNlriPrefixPrfxLen | not-accessible | current | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| 1.2.826.1.4.5.1.8 | ColumnbgpNlriPrefixBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route. |
| 1.2.826.1.4.5.1.9 | ColumnbgpNlriPrefixAsSize | read-only | current | Whether the bgpNlriPrefixASPathStr field contains two or four byte AS numbers. |
| 1.2.826.1.4.5.1.10 | ColumnbgpNlriPrefixASPathStr | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. If bgpRmEntAsSize is four-octet and… |
| 1.2.826.1.4.5.1.11 | ColumnbgpNlriPrefixPathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.2.826.1.4.5.1.12 | ColumnbgpNlriPrefixPathAttrNextHop | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The … |
| 1.2.826.1.4.5.1.13 | ColumnbgpNlriPrefixPathAttrMultExtDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpNlriPrefixPathAttrMEDPrsnt is TRUE. |
| 1.2.826.1.4.5.1.14 | ColumnbgpNlriPrefixPathAttrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route. |
| 1.2.826.1.4.5.1.15 | ColumnbgpNlriPrefixPathAttrAtomicAgg | read-only | current | When this object is set to AMB_BGP_ATOMIC_AGGR_PRESENT, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specif… |
| 1.2.826.1.4.5.1.16 | ColumnbgpNlriPrefixPathAttrAggAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. |
| 1.2.826.1.4.5.1.17 | ColumnbgpNlriPrefixPathAttrAggAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of zero indicates the absence of this attribute. Note propagation of AS of ze… |
| 1.2.826.1.4.5.1.18 | ColumnbgpNlriPrefixPathAttrCalcLclPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. |
| 1.2.826.1.4.5.1.19 | ColumnbgpNlriPrefixPathAttrOrigId | read-only | current | The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attr… |
| 1.2.826.1.4.5.1.20 | ColumnbgpNlriPrefixPathAttrWeight | read-only | current | The local degree of preference assigned to this route. |
| 1.2.826.1.4.5.1.21 | ColumnbgpNlriPrefixFlapStatsConfig | read-only | current | The index of the route flap configuration table entry containing the settings being applied to this route for dampening. |
| 1.2.826.1.4.5.1.22 | ColumnbgpNlriPrefixFlapStatsPenalty | read-only | current | The current penalty value of this route. If it is greater than the cutoff threshold the route is suppressed. |
| 1.2.826.1.4.5.1.23 | ColumnbgpNlriPrefixFlapStatsFlapcnt | read-only | current | The number of times this route has flapped since statistics were last cleared. |
| 1.2.826.1.4.5.1.24 | ColumnbgpNlriPrefixFlapStatsSupprsd | read-only | current | Whether or not this route is suppressed. |
| 1.2.826.1.4.5.1.25 | ColumnbgpNlriPrefixFlapStatsTimeleft | read-only | current | The time left until this route is no longer suppressed. Only valid if the route is suppressed. |
| 1.2.826.1.4.5.1.26 | ColumnbgpNlriPrefixFlapStatsCleardamp | read-only | current | This field is present to ensure that fields in the bgpNlriPrefixTable correspond to fields in the bgpNlriTable. It has no meaning when read. |
| 1.2.826.1.4.5.1.27 | ColumnbgpNlriPrefixFlapStatsClearstat | read-only | current | This field is present to ensure that fields in the bgpNlriPrefixTable correspond to fields in the bgpNlriTable. It has no meaning when read. |
| 1.2.826.1.4.5.1.28 | ColumnbgpNlriPrefixEcmp | read-only | current | Whether or not this route was installed into the Forwarding Table as an ECMP route (it may or may not be the best BGP4 route advertised to BGP peers). |
| 1.2.826.1.4.5.1.29 | ColumnbgpNlriPrefixPathAttrAsPathLimAs | read-only | current | The AS number of the speaker that attached the AS_PATHLIMIT attribute. A value of 0 indicates the absence of this attribute. Note that propagation of AS of zer… |
| 1.2.826.1.4.5.1.30 | ColumnbgpNlriPrefixPthAttAsPthLimUpper | read-only | current | The upper bound on the number of ASes in the AS_PATH associated with this route before the route will be filtered. Only valid if bgpPathAttrAsPathLimAs is non-… |
| 1.2.826.1.4.5.1.31 | ColumnbgpNlriPrefixIsActive | read-only | current | An indication of whether or not this route is installed in the forwarding table. If bgpRmAfiSafiAdvertiseInactive is set to 'false', then this is set to - 'act… |
| 1.2.826.1.4.5.1.32 | ColumnbgpNlriPrefixUserData | read-only | current | User data for this BGP NLRI prefix entry. |
| 1.2.826.1.4.5.1.33 | ColumnbgpNlriPrefixStale | read-only | current | Whether or not this route was last sent by the peer before BGP detected that the peer was restarting. If the route is not re-advertised by the peer before the … |
| 1.2.826.1.4.5.1.34 | ColumnbgpNlriPrefixFlapStartTime | read-only | current | The value of sysUpTime when this route flapped. If RIB Manager is not tracking a penalty for this route, this field is set to zero. |
| 1.2.826.1.4.5.1.35 | ColumnbgpNlriPrefixLinkLocalNextHop | read-only | current | The IPv6 link-local address of the border router that should be used to access the destination network. This object is only valid for a prefix with a received … |
| 1.2.826.1.4.5.1.36 | ColumnbgpNlriPrefixPathAttrMEDPrsnt | read-only | current | If true, then the route has an associated MED attribute, whose value is given in bgpNlriPrefixPathAttrMultExitDisc. If false, the route has no MED attribute, a… |
| 1.2.826.1.4.5.1.37 | ColumnbgpNlriPrefixPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.5.1.38 | ColumnbgpNlriPrefixHistory | read-only | current | If true, then the route is a history route. If false it is current. |
| 1.2.826.1.4.5.1.39 | ColumnbgpNlriPrefixPmsi | read-only | current | This field contains the full line format of the PMSI attribute value omitting the attribute header. Note that the value will be truncated if it exceeds the max… |
| 1.2.826.1.4.5.1.40 | ColumnbgpNlriPrefixPmsiActualLen | read-only | current | This field contains the actual length of the PMSI attribute. If the PMSI attribute value has been truncated this gives the true length. |
| 1.2.826.1.4.5.1.41 | ColumnbgpNlriPrefixPathAttrAdminDistance | read-only | current | The admin distance of the BGP route used as a tie-breaker in RTM |
| 1.2.826.1.4.5.1.42 | ColumnbgpNlriPrefixReasonNotBest | read-only | current | If bgpNlriPrefixBest is 'true', then this field is set to 'routeIsBest'. Otherwise, it reports the stage in the decision process when the route was determined … |
| 1.2.826.1.4.5.1.43 | ColumnbgpNlriPrefixPeerType | read-only | current | If bgpNlriPrefixPeerOrAfm is peer, this field indicates whether the source peer is an iBGP or eBGP peer. If bgpNlriPrefixPeerOrAfm is afm, this field is set to… |
| 1.2.826.1.4.5.1.44 | ColumnbgpNlriPrefixRemoteAddrType | read-only | current | The address family of the address of the BGP peer that this route was learned from. This field is only valid if bgpNlriPrefixPeerOrAfm is peer. This field is e… |
| 1.2.826.1.4.5.1.45 | ColumnbgpNlriPrefixRemoteAddr | read-only | current | The address of the BGP peer that this route was learned from. This field is only valid if bgpNlriPrefixPeerOrAfm is peer. This field is equivalent to bgpPeerRe… |
| 1.2.826.1.4.5.1.46 | ColumnbgpNlriPrefixRemoteAddrScopeId | read-only | current | The scope ID of the BGP peer address. This field is only valid if bgpNlriPrefixPeerOrAfm is peer. This field is equivalent to bgpPeerLocalAddrScopeId. |
| 1.2.826.1.4.5.1.47 | ColumnbgpNlriPrefixAggrType | read-only | current | This object indicates any aggregation processing that has been applied to this route. A value of noAggregation(1) indicates that this route does not aggregate … |
| 1.2.826.1.4.5.1.48 | ColumnbgpNlriPrefixOutputInterface | read-only | current | The output interface. This field is only non-zero for routes received with a link-local IPv6 next hop from directly connected peers. |
| 1.2.826.1.4.5.1.49 | ColumnbgpNlriPrefixCommunities | read-only | current | The community membership associated with the route after import policy has been applied. Each community is four-octets in length and each community follows the… |
| 1.2.826.1.4.5.1.50 | ColumnbgpNlriPrefixExtCommunities | read-only | current | The extended community membership associated with the route after import policy has been applied. Each extended community is eight-octets in length and each ex… |
| 1.2.826.1.4.5.1.51 | ColumnbgpNlriPrefixPathAttrAuxData | read-only | current | The auxilliary data of the route with format specific to AFI/SAFI |
| 1.2.826.1.4.6 | TablebgpRcvdNlriTable | not-accessible | current | The BGP-4 Received NLRI Table contains information about all paths to destination networks received from all BGP4 peers. Paths from AFMs are not contained with… |
| 1.2.826.1.4.6.1 | RowbgpRcvdNlriEntry | not-accessible | current | Information about a path to a network. |
| 1.2.826.1.4.6.1.2 | ColumnbgpRcvdNlriPeerIndex | not-accessible | current | The index of the BGP peer this route was learned from. This field is equivalent to a bgpPeerStatusPeerIndex. |
| 1.2.826.1.4.6.1.3 | ColumnbgpRcvdNlriAfi | not-accessible | current | The address family of the prefix for this NLRI. |
| 1.2.826.1.4.6.1.4 | ColumnbgpRcvdNlriSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI. |
| 1.2.826.1.4.6.1.5 | ColumnbgpRcvdNlriPrfx | not-accessible | current | An address prefix in the Network Layer Reachability Information field. The prefix length is specified by bgpRcvdNlriPrfxLen. Any bits beyond the length specifi… |
| 1.2.826.1.4.6.1.6 | ColumnbgpRcvdNlriPrfxLen | not-accessible | current | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| 1.2.826.1.4.6.1.7 | ColumnbgpRcvdNlriAsSize | read-only | current | Whether the bgpRcvdNlriASPathStr field contains two or four byte AS numbers. |
| 1.2.826.1.4.6.1.8 | ColumnbgpRcvdNlriASPathStr | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. If bgpRmEntAsSize is four-octet and… |
| 1.2.826.1.4.6.1.9 | ColumnbgpRcvdPathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.2.826.1.4.6.1.10 | ColumnbgpRcvdPathAttrNextHop | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The … |
| 1.2.826.1.4.6.1.11 | ColumnbgpRcvdPathAttrMultiExitDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpRcvdPathAttrMEDPrsnt is TRUE. |
| 1.2.826.1.4.6.1.12 | ColumnbgpRcvdPathAttrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route. |
| 1.2.826.1.4.6.1.13 | ColumnbgpRcvdPathAttrAtomicAggregate | read-only | current | When this object is set to AMB_BGP_ATOMIC_AGGR_PRESENT, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specif… |
| 1.2.826.1.4.6.1.14 | ColumnbgpRcvdPathAttrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. |
| 1.2.826.1.4.6.1.15 | ColumnbgpRcvdPathAttrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of zero indicates the absence of this attribute. Note propagation of AS of ze… |
| 1.2.826.1.4.6.1.16 | ColumnbgpRcvdPathAttrOrigId | read-only | current | The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attr… |
| 1.2.826.1.4.6.1.17 | ColumnbgpRcvdPathAttrAsPathLimAs | read-only | current | The AS number of the speaker that attached the AS_PATHLIMIT attribute. A value of 0 indicates the absence of this attribute. Note that propagation of AS of zer… |
| 1.2.826.1.4.6.1.18 | ColumnbgpRcvdPathAttrAsPathLimUpper | read-only | current | The upper bound on the number of ASes in the AS_PATH associated with this route before the route will be filtered. Only valid if bgpRcvdPathAttrAsPathLimAs is … |
| 1.2.826.1.4.6.1.19 | ColumnbgpRcvdNlriUserData | read-only | current | User data for this BGP NLRI entry. |
| 1.2.826.1.4.6.1.20 | ColumnbgpRcvdNlriLinkLocalNextHop | read-only | current | The IPv6 link-local address of the border router that should be used to access the destination network. This object is only valid for a prefix with a received … |
| 1.2.826.1.4.6.1.21 | ColumnbgpRcvdPathAttrMEDPrsnt | read-only | current | If true, then the route has an associated MED attribute, whose value is given in bgpRcvdPathAttMultiExitDisc. If false, the route has no MED attribute, and the… |
| 1.2.826.1.4.6.1.22 | ColumnbgpRcvdNlriPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.6.1.23 | ColumnbgpRcvdPathAccepted | read-only | current | If true, then the route was accepted by policy. If false it was denied. |
| 1.2.826.1.4.6.1.24 | ColumnbgpRcvdNlriPmsi | read-only | current | This field contains the full line format of the PMSI attribute value omitting the attribute header. Note that the value will be truncated if it exceeds the max… |
| 1.2.826.1.4.6.1.25 | ColumnbgpRcvdNlriPmsiActualLen | read-only | current | This field contains the actual length of the PMSI attribute. If the PMSI attribute value has been truncated this gives the true length. |
| 1.2.826.1.4.6.1.26 | ColumnbgpRcvdNlriOutputInterface | read-only | current | The output interface. This field is only non-zero for routes received with a link-local IPv6 next hop from directly connected peers. |
| 1.2.826.1.4.6.1.27 | ColumnbgpRcvdNlriCommunities | read-only | current | The community membership associated with the route before import policy has been applied. Each community is four-octets in length and each community follows th… |
| 1.2.826.1.4.6.1.28 | ColumnbgpRcvdNlriExtCommunities | read-only | current | The extended community membership associated with the route before import policy has been applied. Each extended community is eight-octets in length and each e… |
| 1.2.826.1.4.7 | TablebgpRcvdPathAttrUnknownTable | not-accessible | current | The BGP-4 Received Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the l… |
| 1.2.826.1.4.7.1 | RowbgpRcvdPathAttrUnknownEntry | not-accessible | current | Information about an unknown attribute provided with a path to a network. |
| 1.2.826.1.4.7.1.7 | ColumnbgpRcvdPathAttrUnknownType | not-accessible | current | The attribute type advertised with this unknown attribute by the peer. This is the one octet type code field and does not include the attribute flags. These ar… |
| 1.2.826.1.4.7.1.8 | ColumnbgpRcvdPathAttrUnknownValue | read-only | current | Value of path attribute not understood by the base BGP-4 document. This will begin with the flags, code and length. Note that only unknown optional-transitive … |
| 1.2.826.1.4.7.1.9 | ColumnbgpRcvdPathAttrUnknownUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.4.7.1.10 | ColumnbgpRcvdPathAttrUnknownPathId | not-accessible | current | The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this … |
| 1.2.826.1.4.8 | TablebgpAROPathAttrUnknownTable | not-accessible | current | The BGP-4 ARO Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local … |
| 1.2.826.1.4.8.1 | RowbgpAROPathAttrUnknownEntry | not-accessible | current | Information about an unknown attribute provided with a path to a network. |
| 1.2.826.1.4.8.1.7 | ColumnbgpAROPathAttrUnknownType | not-accessible | current | The attribute type advertised with this unknown attribute to the peer. This is the one octet type code field and does not include the attribute flags. These ar… |
| 1.2.826.1.4.8.1.8 | ColumnbgpAROPathAttrUnknownValue | read-only | current | Value of path attribute not understood by the base BGP-4 document. This will begin with the flags, code and length. Note that only unknown optional-transitive … |
| 1.2.826.1.4.8.1.9 | ColumnbgpAROPathAttrUnknownUserData | read-only | current | User data for this path attribute. |
| 1.2.826.1.5 | NodebgpPib | |||
| 1.2.826.1.5.1 | TablebgpRouteMapTable | not-accessible | current | The table of DC-BGP Route Maps. If a particular match or set category does not apply to a route map then do not define the corresponding field in the MIB row. |
| 1.2.826.1.5.1.1 | RowbgpRouteMapEntry | not-accessible | current | Each entry represents a filter consisting of Match and Set entries. |
| 1.2.826.1.5.1.1.2 | ColumnbgpRouteMapIndex | not-accessible | current | The index of this bgpRouteMapEntry. This is the Index used to reference the Route Map. Route map indexes 0xFFnnnnnn, are reserved for representing ORFs adverti… |
| 1.2.826.1.5.1.1.3 | ColumnbgpRouteMapNumber | not-accessible | current | The index of this bgpRouteMapEntry. This is a number used to reference more than one filter per route map index. |
| 1.2.826.1.5.1.1.4 | ColumnbgpRouteMapRowStatus | read-create | current | Used to create and delete a Route Map. |
| 1.2.826.1.5.1.1.5 | ColumnbgpRouteMapMaAfi | read-create | current | The AFI index to match the AFI type against. This value must be set if the bgpRouteMapSeNext field is defined. This value is only used if bgpRouteMapMaAfiDef i… |
| 1.2.826.1.5.1.1.6 | ColumnbgpRouteMapMaAfiDef | read-create | current | Whether or not the value in bgpRouteMapMaAfi should be used for matching. |
| 1.2.826.1.5.1.1.7 | ColumnbgpRouteMapMaSafi | read-create | current | The SAFI index to match the AFI type against. This value must be set if the bgpRouteMapSeNext field is defined. This value is only used if bgpRouteMapMaSafiDef… |
| 1.2.826.1.5.1.1.8 | ColumnbgpRouteMapMaSafiDef | read-create | current | Whether or not the value in bgpRouteMapMaSafi should be used for matching. |
| 1.2.826.1.5.1.1.9 | ColumnbgpRouteMapMaAs | read-create | current | Contains the regular expression to use when matching the AS-Path for a route. This is stored here in ASCII format. AS numbers are matched as decimal numbers. F… |
| 1.2.826.1.5.1.1.10 | ColumnbgpRouteMapMaComm | read-create | current | If not representing one or more ORF entries this contains the regular expression to use when matching elements of the community list for a route. If representi… |
| 1.2.826.1.5.1.1.11 | ColumnbgpRouteMapMaExtComm | read-create | current | If not representing one or more ORF entries this contains the regular expression to use when matching elements of the extended community list for a route. If r… |
| 1.2.826.1.5.1.1.12 | ColumnbgpRouteMapMaAddr | read-only | current | Whether or not there is an IP Address prefix table to match the NLRI attribute against. |
| 1.2.826.1.5.1.1.13 | ColumnbgpRouteMapMaNext | read-only | current | Whether or not there is an IP Address prefix table to match the Next Hop attribute against. |
| 1.2.826.1.5.1.1.14 | ColumnbgpRouteMapMaSource | read-only | current | Whether or not there is an IP Address prefix table to match the source address against. |
| 1.2.826.1.5.1.1.15 | ColumnbgpRouteMapMaMed | read-create | current | The value to match the Multiple Exit Descriminator attribute against. A value of 0 indicates a match on no MED or a MED of 0. This value is only used if bgpRou… |
| 1.2.826.1.5.1.1.16 | ColumnbgpRouteMapMaMedDef | read-create | current | Whether or not the value in bgpRouteMapMaMed should be used for matching. |
| 1.2.826.1.5.1.1.17 | ColumnbgpRouteMapMaUser | read-create | current | Set to TRUE if the user exit for matching is to be called. |
| 1.2.826.1.5.1.1.18 | ColumnbgpRouteMapSeAs | read-create | current | The number of times the local AS number is prepended to the AS path if there is a match. This is only relevant if the route map is being used for exporting rou… |
| 1.2.826.1.5.1.1.19 | ColumnbgpRouteMapSeAsAct | read-create | current | Whether or not the value in bgpRouteMapSeAs should be used for updating attributes. The possible action values are: AMB_BGP_PATH_NONE - Ignore bgpRouteMapSeAs … |
| 1.2.826.1.5.1.1.20 | ColumnbgpRouteMapSeComm | read-create | current | Contains the regular expression used when executing the action defined by bgpRouteMapSeCommAct. Allowed values depend on the value of bgpRouteMapSeCommAct - se… |
| 1.2.826.1.5.1.1.21 | ColumnbgpRouteMapSeCommAct | read-create | current | The action to take on the community list if this route map matches the route. Note that if the action is AMB_BGP_SET_SPECIFIC or AMB_BGP_REMOVE_ALL_AND_SET, th… |
| 1.2.826.1.5.1.1.22 | ColumnbgpRouteMapSeExtComm | read-create | current | Contains the regular expression used when executing the action defined by bgpRouteMapSeExtCommAct. This field may be ignored depending on the value of bgpRoute… |
| 1.2.826.1.5.1.1.23 | ColumnbgpRouteMapSeExtCommAct | read-create | current | The action to take on the extended community list if this route map matches the route. Note that if the action is AMB_BGP_SET_SPECIFIC or AMB_BGP_REMOVE_ALL_AN… |
| 1.2.826.1.5.1.1.24 | ColumnbgpRouteMapSeLocPref | read-create | current | The value to set the Local Pref to if there is a match. This value is only used if bgpRouteMapSeLocPrefDef is TRUE. |
| 1.2.826.1.5.1.1.25 | ColumnbgpRouteMapSeLocPrefDef | read-create | current | Whether or not the value in bgpRouteMapSeLocPref should be used for updating attributes. |
| 1.2.826.1.5.1.1.26 | ColumnbgpRouteMapSeMed | read-create | current | The value to set the MED to if there is a match. A value of 0 indicates that the MED should be removed. This value is only used if bgpRouteMapSeMedDef is TRUE. |
| 1.2.826.1.5.1.1.27 | ColumnbgpRouteMapSeMedDef | read-create | current | Whether or not the value in bgpRouteMapSeMed should be used for updating attributes. This field must be set to FALSE if either bgpRouteMapSeMedDelta is non-zer… |
| 1.2.826.1.5.1.1.28 | ColumnbgpRouteMapSeNext | read-create | current | The value to set the Next Hop to if there is a match. Note that if this is set then the match AFI and SAFI fields (bgpRouteMapMaAfi, bgpRouteMapMaSafi) must al… |
| 1.2.826.1.5.1.1.29 | ColumnbgpRouteMapSeOrigin | read-create | current | The value to set the Origin to if there is a match. This value is only used if bgpRouteMapSeOriginDef is TRUE. |
| 1.2.826.1.5.1.1.30 | ColumnbgpRouteMapSeOriginDef | read-create | current | Whether or not the value in bgpRouteMapSeOrigin should be used for updating attributes. |
| 1.2.826.1.5.1.1.31 | ColumnbgpRouteMapSeWeight | read-create | current | The value to set the Weight to if there is a match. This value is only used if bgpRouteMapSeWeightDef is TRUE. |
| 1.2.826.1.5.1.1.32 | ColumnbgpRouteMapSeWeightDef | read-create | current | Whether or not the value in bgpRouteMapSeWeight should be used for updating attributes. |
| 1.2.826.1.5.1.1.33 | ColumnbgpRouteMapSeFlap | read-create | current | The index of the route flap configuration table entry to use if there is a match, or zero if route flap dampening is not required. If there is a match and this… |
| 1.2.826.1.5.1.1.34 | ColumnbgpRouteMapSeUser | read-create | current | Set to TRUE if the user exit for Sets is to be called. |
| 1.2.826.1.5.1.1.35 | ColumnbgpRouteMapHitcnt | read-only | current | The number of times this row has been matched on. |
| 1.2.826.1.5.1.1.36 | ColumnbgpRouteMapClearcnt | read-create | current | Set to TRUE to clear the counter associated with this row. Reading the value of this field has no meaning. |
| 1.2.826.1.5.1.1.37 | ColumnbgpRouteMapUserInfo | read-create | current | A byte array to allow the user to put in information. This information will be passed to user exits. |
| 1.2.826.1.5.1.1.38 | ColumnbgpRouteMapType | read-create | current | The type of route map entry. This is only relevant for policy filtering route maps. It indicates the action which should apply to a route which matches the rou… |
| 1.2.826.1.5.1.1.39 | ColumnbgpRouteMapContinue | read-create | current | Field containing the number of the route map clause to continue processing at. For a series of AMB_BGP_ROUTE_MAP rows that are ANDed together (that is, the bgp… |
| 1.2.826.1.5.1.1.40 | ColumnbgpRouteMapOrfAssoc | read-create | current | The type of association (if any) this route map has with the ORF protocol. If set to local then the filtering information contained within this route map will … |
| 1.2.826.1.5.1.1.41 | ColumnbgpRouteMapSeAsLimUpper | read-create | current | If there is a match this will cause the AS_PATHLIMIT attribute to be added if it does not already exist. If it does exist then it will be replaced. In either c… |
| 1.2.826.1.5.1.1.42 | ColumnbgpRouteMapSeAsLimDef | read-create | current | Whether or not the value in bgpRouteMapSeAsLimit should be used for updating attributes. |
| 1.2.826.1.5.1.1.43 | ColumnbgpRouteMapMaOrigin | read-create | current | The value to match the Origin attribute against. This value is only used if bgpRouteMapMaOriginDef is TRUE. |
| 1.2.826.1.5.1.1.44 | ColumnbgpRouteMapMaOriginDef | read-create | current | Whether or not the value in bgpRouteMapMaOrigin should be used for matching. |
| 1.2.826.1.5.1.1.45 | ColumnbgpRouteMapSeMedDelta | read-create | current | If there is a match this will cause the MED attribute to be incremented (or decremented) by the value specified. The direction of the value change is defined b… |
| 1.2.826.1.5.1.1.46 | ColumnbgpRouteMapSeMedDeltaTyp | read-create | current | Whether to increment or decrement the MED attribute by the value in bgpRouteMapSeMedDelta. |
| 1.2.826.1.5.1.1.47 | ColumnbgpRouteMapSeMedIgp | read-create | current | If there is a match this will cause the MED attribute to be set to the IGP distance to the next hop. This field must be set to FALSE if either bgpRouteMapSeMed… |
| 1.2.826.1.5.1.1.48 | ColumnbgpRouteMapSeAsPrependCount | read-create | current | This field is deprecated and will always return 0 when read. |
| 1.2.826.1.5.1.1.49 | ColumnbgpRouteMapSeAsPrependSize | read-create | current | The size of AS numbers in the field bgpRouteMapSeAsPrependAsVals to prepend to the AS path if there is a match. This field can be changed at any time. |
| 1.2.826.1.5.1.1.50 | ColumnbgpRouteMapSeAsPrependAsVals | read-create | current | An array containing the AS numbers to prepend to the AS path if there is a match. The length of each AS number is given by bgpRouteMapSeAsPrependSize. This fie… |
| 1.2.826.1.5.1.1.51 | ColumnbgpRouteMapMaAnd | read-create | current | Indicates that the match statements in this route map should be logically ANDed with the match statements in the route map indicated by bgpRouteMapContinue. Th… |
| 1.2.826.1.5.1.1.52 | ColumnbgpRouteMapSeSlaveMed | read-create | current | The value to set the MED to if there is a match and we are HA slave. A value of 0 indicates that the MED should be removed. This value is only used if bgpRoute… |
| 1.2.826.1.5.1.1.53 | ColumnbgpRouteMapSeSlaveMedDef | read-create | current | Whether or not the value in bgpRouteMapSeSlaveMed should be used for updating attributes. This field must be set to FALSE if either bgpRouteMapSeSlaveMedDelta … |
| 1.2.826.1.5.1.1.54 | ColumnbgpRouteMapSeSlaveLocPref | read-create | current | The value to set the Local Pref to if there is a match and we are HA slave. This value is only used if bgpRouteMapSeLocPrefDef is TRUE. |
| 1.2.826.1.5.1.1.55 | ColumnbgpRouteMapSeSlaveLocPrefDef | read-create | current | Whether or not the value in bgpRouteMapSeSlaveLocPref should be used for updating attributes. |
| 1.2.826.1.5.1.1.56 | ColumnbgpRouteMapSeSlaveMedDelta | read-create | current | If there is a match this will cause the MED attribute to be incremented (or decremented) by the value specified. The direction of the value change is defined b… |
| 1.2.826.1.5.1.1.57 | ColumnbgpRouteMapSeSlaveMedDeltaTyp | read-create | current | Whether to increment or decrement the MED attribute by the value in bgpRouteMapSeMedDelta. This will be applicable when we are HA slave. |
| 1.2.826.1.5.1.1.58 | ColumnbgpRouteMapSeSlaveMedIgp | read-create | current | If there is a match this will cause the MED attribute to be set to the IGP distance to the next hop. This field must be set to FALSE if either bgpRouteMapSeMed… |
| 1.2.826.1.5.1.1.59 | ColumnbgpRouteMapSeSlaveAs | read-create | current | The number of times the local AS number is prepended to the AS path if there is a match. This is only relevant if the route map is being used for exporting rou… |
| 1.2.826.1.5.1.1.60 | ColumnbgpRouteMapSeSlaveAsAct | read-create | current | Whether or not the value in bgpRouteMapSeSlaveAs should be used for updating attributes. The possible action values are: AMB_BGP_PATH_NONE - Ignore bgpRouteMap… |
| 1.2.826.1.5.1.1.61 | ColumnbgpRouteMapSeSlaveAsPrependCount | read-create | current | To prepend AS numbers to the AS-Path, set bgpRouteMapSeSlaveAsPrependCount to the count of the AS numbers to prepend, set bgpRouteMapSeSlaveAsPrependSize to in… |
| 1.2.826.1.5.1.1.62 | ColumnbgpRouteMapSeSlaveAsPrependSize | read-create | current | The size of AS numbers in the field bgpRouteMapSeSlaveAsPrependAsVals to prepend to the AS path if there is a match. This field is only used if bgpRouteMapSeSl… |
| 1.2.826.1.5.1.1.63 | ColumnbgpRouteMapSeSlaveAsPrependAsVals | read-create | current | An array containing the AS numbers to prepend to the AS path if there is a match. The length of each AS number is given by bgpRouteMapSeSlaveAsPrependSize. Thi… |
| 1.2.826.1.5.1.1.64 | ColumnbgpRouteMapSeAdminDistance | read-create | current | The value to set the Admin Distance if there is a match. This value is only used if bgpRouteMapSeAdminDistanceDef is TRUE. |
| 1.2.826.1.5.1.1.65 | ColumnbgpRouteMapSeAdminDistanceDef | read-create | current | Whether or not the value in bgpRouteMapSeAdminDistance should be used for updating attributes. |
| 1.2.826.1.5.1.1.66 | ColumnbgpRouteMapAsPathList | read-create | current | The index of the AS Path Access List to use when matching the AS path in a route. A value of zero means that no AS Path Access List is used for matching. |
| 1.2.826.1.5.1.1.67 | ColumnbgpRouteMapMaCommList | read-create | current | The index of the Community List to use when matching communities in a route. The field bgpRouteMapCommListExact is used to define whether the set of communitie… |
| 1.2.826.1.5.1.1.68 | ColumnbgpRouteMapCommListExact | read-create | current | Whether the set of communities in the route must exactly match the set of communities in the community list. If set to true then there must be an exact match o… |
| 1.2.826.1.5.1.1.69 | ColumnbgpRouteMapMaExtCommList | read-create | current | The index of the Extended Community List to use when matching extended communities in a route. The field bgpRouteMapExtCommListExact is used to define whether … |
| 1.2.826.1.5.1.1.70 | ColumnbgpRouteMapExtCommListExact | read-create | current | This field is only used if the extended community list row is of type 'community-group' and determines whether the set of extended communities in the route mus… |
| 1.2.826.1.5.1.1.71 | ColumnbgpRouteMapMaAddrAallPre | read-create | current | The index of the AALL IP Prefix access list used to match the NLRI attribute against. |
| 1.2.826.1.5.1.1.72 | ColumnbgpRouteMapMaNextAallPre | read-create | current | The index of the AALL IP Prefix access list used to match the Next Hop attribute against. |
| 1.2.826.1.5.1.1.73 | ColumnbgpRouteMapMaSourceAallPre | read-create | current | The index of the AALL IP Prefix access list used to match the source address against. |
| 1.2.826.1.5.1.1.74 | ColumnbgpRouteMapSeCommListDel | read-create | current | Specifies the index of a Community List used to delete communities from routes matching this route-map. A value of zero means that no Community List is used. |
| 1.2.826.1.5.1.1.75 | ColumnbgpRouteMapSeCommListAdd | read-create | current | Specifies the index of a Community List used to add communities to routes matching this route-map. A value of zero means that no Community List is used. |
| 1.2.826.1.5.1.1.76 | ColumnbgpRouteMapSeXCommListDel | read-create | current | Specifies the index of an Extended Community List used to delete extended communities from routes matching this route-map. A value of zero means that no Extend… |
| 1.2.826.1.5.1.1.77 | ColumnbgpRouteMapSeXCommListAdd | read-create | current | Specifies the index of an Extended Community List used to add extended communities to routes matching this route-map. A value of zero means that no Extended Co… |
| 1.2.826.1.5.1.1.78 | ColumnbgpRouteMapMaLocPref | read-create | current | The value to match the Local Preference attribute against. This value is only used if bgpRouteMapMaLocPrefDef is TRUE. If a route does not contain a local pref… |
| 1.2.826.1.5.1.1.79 | ColumnbgpRouteMapMaLocPrefDef | read-create | current | Whether or not the value in bgpRouteMapMaLocPref should be used for matching. |
| 1.2.826.1.5.1.1.80 | ColumnbgpRouteMapSeAsRemove | read-create | current | Contains the regular expression to use to remove AS numbers from an AS-Path for a route. This is stored here in ASCII format. AS numbers are matched as decimal… |
| 1.2.826.1.5.1.1.81 | ColumnbgpRouteMapSeLocalDiscard | read-create | current | If set to 'true' then routes matching this route-map will have their action type set locally to DISCARD. |
| 1.2.826.1.5.1.1.82 | ColumnbgpRouteMapSeNextHopPeer | read-create | current | If set to 'true' in an import route map, then routes matching this route-map will have their Next Hop set to the peer's address. This field has no effect on ro… |
| 1.2.826.1.5.1.1.83 | ColumnbgpRouteMapSeSaasSteering | read-create | current | If set to 'true' in an import route map, then routes matching this route-map will have saas steering feature enabled. With this routes learnt from l3vpn/ibgp/e… |
| 1.2.826.1.5.2 | TablebgpIpPreTable | not-accessible | current | This table is deprecated for user configuration - it is retained for back compatibility and for received ORF prefixes only. When configuring prefix lists you s… |
| 1.2.826.1.5.2.1 | RowbgpIpPreEntry | not-accessible | current | Each entry represents an IP Prefix. |
| 1.2.826.1.5.2.1.4 | ColumnbgpIpPreMatch | not-accessible | current | The index of this bgpIpPreEntry. This decides what match command is used by the route map this list is tied to. If the IP prefix list is not associated with a … |
| 1.2.826.1.5.2.1.5 | ColumnbgpIpPreNumber | not-accessible | current | The index of this bgpIpPreEntry. This number is used to reference more than one filter per route map index. |
| 1.2.826.1.5.2.1.6 | ColumnbgpIpPreRowStatus | read-create | current | Used to create and delete a Prefix. |
| 1.2.826.1.5.2.1.7 | ColumnbgpIpPreAfi | read-create | current | The AFI of the address prefix. This MIB is intended for IP prefix matching, so AFI = IPv4 and IPv6 are supported but AFI = L2VPN is not supported. |
| 1.2.826.1.5.2.1.8 | ColumnbgpIpPreSafi | read-create | current | The SAFI of the address prefix. This MIB is intended for IP prefix matching, so AFI/SAFI = L2VPN/VPLS or L2VPN/EVPN is not supported. |
| 1.2.826.1.5.2.1.9 | ColumnbgpIpPreAddr | read-create | current | The Address part of the prefix. This is matched against the line format BGP NLRI omitting any NLRI length field and any leading MPLS labels. For SAFI 128 this … |
| 1.2.826.1.5.2.1.10 | ColumnbgpIpPreLen | read-create | current | The Length (in bits) part of the prefix (as in the 16 in a 128.128/16 prefix). When attempting to match a prefix to this address, only the first len bits of th… |
| 1.2.826.1.5.2.1.11 | ColumnbgpIpPreGe | read-create | current | The GE value of the prefix. GE and LE allow the range of the prefix length to be matched on to be varied. The range is assumed to be from ge-value to the addre… |
| 1.2.826.1.5.2.1.12 | ColumnbgpIpPreLe | read-create | current | The LE value of the prefix. GE and LE allow the range of the prefix length to be matched on to be varied. The range is assumed to be from ge-value to the addre… |
| 1.2.826.1.5.2.1.13 | ColumnbgpIpPreType | read-create | current | The type of this prefix. The behavior is as follows. - If this prefix is not associated with a route map then setting this to DENY will deny any matching route… |
| 1.2.826.1.5.7 | TablebgpPeergrTable | not-accessible | current | The table of peer groups. A peer group is a set of peers that share a common peer group configuration. Using peer groups simplifies peer configuration. Instead… |
| 1.2.826.1.5.7.1 | RowbgpPeergrEntry | not-accessible | current | Each entry represents a peer group. |
| 1.2.826.1.5.7.1.2 | ColumnbgpPeergrIndex | not-accessible | current | The index of this bgpPeergrEntry. This is the index of the peer group. |
| 1.2.826.1.5.7.1.3 | ColumnbgpPeergrRowStatus | read-create | current | Used to create and delete a peer group. |
| 1.2.826.1.5.7.1.4 | ColumnbgpPeergrConfig | read-create | current | The index of the Policy Configuration Table this peer group uses for its policy setup. A value of zero indicates that the peer group is not associated with any… |
| 1.2.826.1.5.7.1.5 | ColumnbgpPeergrArea | read-create | current | Whether this peer group is for IBGP, confederation EBGP, or EBGP peers. This field can only be changed when the row is not active. |
| 1.2.826.1.5.7.1.6 | ColumnbgpPeergrAggrConfedAS | read-create | current | This value indicates whether or not the neighbors in the peer group understand aggregated confederation AS_PATH information. If set to FALSE, no confederation … |
| 1.2.826.1.5.7.1.7 | ColumnbgpPeergrSoftResetWithStoredInfo | read-create | current | This object is used in conjunction with bgpPeergrAfiSafiSoftResetStore to configure 'soft reset with stored routing information'. This option causes all routes… |
| 1.2.826.1.5.7.1.8 | ColumnbgpPeergrAllowLocalAs | read-create | current | The number of instances of the local AS identifier that may be contained in the route's AS-Path without rejecting the route. The AS-Path attribute of a BGP rou… |
| 1.2.826.1.5.7.1.9 | ColumnbgpPeergrDisableSenderLoopDetect | read-create | current | This field is used in conjunction with bgpPeergrAfiSafiDisSndLpDetect to indicate whether BGP should disable sender-side loop detection when sending routes to … |
| 1.2.826.1.5.7.1.10 | ColumnbgpPeergrNxtHopSlf | read-create | current | Whether or not the peer group has next hop self configured. This field overrides the peer bgpPeerNxtHopSlf field. For an individual AFI-SAFI, if the bgpPeerAfi… |
| 1.2.826.1.5.7.1.11 | ColumnbgpPeergrThirdPtyNxtHop | read-create | current | Whether or not the local BGP speaker should advertise routes received from this peer group using third party next hop (this is optional behaviour described in … |
| 1.2.826.1.5.7.1.12 | ColumnbgpPeergrNxtHopPeer | read-create | current | Whether or not the local BGP speaker should override the use of third party next hop by an EBGP peer. If an EBGP peer speaker uses third party next hop, routes… |
| 1.2.826.1.5.7.1.13 | ColumnbgpPeergrEnableAttributeDiscard | read-create | current | This value indicates whether or not the 'attribute discard' error handling mechanism is used for BGP UPDATE messages received from peers in this peer group. Th… |
| 1.2.826.1.5.7.1.14 | ColumnbgpPeergrSendComm | read-create | current | This value indicates whether or not to send BGP community attributes to peers in this peer group. When set to 'true', and bgpPeergrAfiSafiSendComm for the rele… |
| 1.2.826.1.5.7.1.15 | ColumnbgpPeergrSendExtComm | read-create | current | This value indicates whether or not to send BGP extended community attributes to peers in this peer group. When set to 'true', and bgpPeergrAfiSafiSendExtComm … |
| 1.2.826.1.5.7.1.16 | ColumnbgpPeergrPassword | read-create | current | The MD5 password used by peers in this peer group. For individual peers, this can be configured using bgpPeerPassword. This value is passed to the sockets stub… |
| 1.2.826.1.5.7.1.17 | ColumnbgpPeergrReflectorClient | read-create | current | This value indicates whether peers in this peer group are reflector clients of this router, or not. For individual peers, this can be configured using bgpPeerR… |
| 1.2.826.1.5.7.1.18 | ColumnbgpPeergrHoldTimeConfigd | read-create | current | Time interval in seconds for the Hold Time configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bg… |
| 1.2.826.1.5.7.1.19 | ColumnbgpPeergrKeepAliveConfigd | read-create | current | Time interval in seconds for the KeepAlive configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bg… |
| 1.2.826.1.5.7.1.20 | ColumnbgpPeergrTtl | read-create | current | The Time To Live used by the connection on peers in this peer group. For individual peers, this can be configured using bgpPeerTtl. Directly connected peers sh… |
| 1.2.826.1.5.7.1.21 | ColumnbgpPeergrMinRteAdvertiseInterval | read-create | current | Time interval in seconds for the MinRouteAdvertisementInterval timer for peers in this peer group. For individual peers, this can be configured using bgpPeerMi… |
| 1.2.826.1.5.7.1.22 | ColumnbgpPeergrMinRteWithdrawInterval | read-create | current | Time interval in seconds for the MinRouteWithdrawInterval timer for peers in this peer group. For individual peers, this can be configured using bgpPeerMinRout… |
| 1.2.826.1.5.7.1.23 | ColumnbgpPeergrConfigMaxPrfx | read-create | current | This object is used in conjunction with the address-family specific bgpPeergrAfiSafiConfigMaxPrfx to limit the number of prefixes that can be accepted from pee… |
| 1.2.826.1.5.7.1.24 | ColumnbgpPeergrConfAltLocalAs | read-create | current | An alternative local AS number that can be used to establish a session with peers in this peer group. This is used when merging two ASs into a single AS. For i… |
| 1.2.826.1.5.7.1.25 | ColumnbgpPeergrWeight | read-create | current | This value defines the weight to be applied to routes received from neighbors in this group. All routes learned from neighbors in this group will have the assi… |
| 1.2.826.1.5.7.1.26 | ColumnbgpPeergrFallover | read-create | current | This value indicates whether or not to monitor the route to the peers in this group so that the session can be deactivated if the route fails. Monitoring the r… |
| 1.2.826.1.5.7.1.27 | ColumnbgpPeergrRemoteAs | read-create | current | The remote autonomous system number. For individual peers, this can be configured using bgpPeerRemoteAs. This field can be changed at any time. However, if a p… |
| 1.2.826.1.5.7.1.28 | ColumnbgpPeergrCheckFirstAsNum | read-create | current | Whether or not the first AS number in the AS_PATH attribute in an UPDATE received from this peer should be checked to make sure it is the same as the AS number… |
| 1.2.826.1.5.7.1.29 | ColumnbgpPeergrConfedMember | read-create | current | This value indicates whether or not the peers in this peer group are members of the same confederation that this router is in. This field can only be set to tr… |
| 1.2.826.1.5.7.1.30 | ColumnbgpPeergrTrapEstab | read-create | current | This value indicates whether or not the Established trap is used for peers in this peer group. This field can be changed at any time. However, if a peer is con… |
| 1.2.826.1.5.7.1.31 | ColumnbgpPeergrTrapBackw | read-create | current | This value indicates whether or not the Backward Transition trap is used for peers in this peer group. This field can be changed at any time. However, if a pee… |
| 1.2.826.1.5.7.1.32 | ColumnbgpPeergrConnectRetryInterval | read-create | current | Time interval for the ConnectRetry timer for peers in this peer group. The suggested value for this timer is 120 seconds. This field can be changed at any time… |
| 1.2.826.1.5.7.1.33 | ColumnbgpPeergrMinASOriginationInt | read-create | current | Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes t… |
| 1.2.826.1.5.7.1.34 | ColumnbgpPeergrConfigDropWarn | read-create | current | This object is used in conjunction with the address-family specific bgpPeergrAfiSafiConfigDropWarn to determine whether the session is dropped or a warning is … |
| 1.2.826.1.5.7.1.35 | ColumnbgpPeergrConfigPassive | read-create | current | If TRUE, then no outbound connections will be initiated, and only incoming connections will be accepted. If FALSE, then outbound connections will be attempted … |
| 1.2.826.1.5.7.1.36 | ColumnbgpPeergrConfigOpenDelay | read-create | current | The delay to enforce in between a TCP connection with peers in this peer group becoming established and a BGP Open message being sent. If this delay is zero, t… |
| 1.2.826.1.5.7.1.37 | ColumnbgpPeergrConfigIdleHold | read-create | current | The time to hold peers in this peer group in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it. No new connecti… |
| 1.2.826.1.5.7.1.38 | ColumnbgpPeergrCheckNextHop | read-create | current | Whether or not to check the BGP next-hop of routes sent to peers in this peer group. If set to TRUE, which is the default, then routes with a BGP next-hop whic… |
| 1.2.826.1.5.7.1.39 | ColumnbgpPeergrMaxOrfEntries | read-create | current | This object is used in conjunction with the address-family specific bgpPeergrAfiSafiMaxOrfEntries to limit the number of ORF entries of all types that can be a… |
| 1.2.826.1.5.7.1.40 | ColumnbgpPeergrPeeringType | read-create | current | The type of peering relationship associated with peers in this peer group. Setting this to 'biLateral' will stop the advertisement of routes with the NOPEER co… |
| 1.2.826.1.5.7.1.41 | ColumnbgpPeergrDisableRouteRefresh | read-create | current | Indicates that DC-BGP should not advertise support for Route Refresh messages to peers in this peer group. When this flag is set, DC-BGP will not advertise sup… |
| 1.2.826.1.5.7.1.42 | ColumnbgpPeergrTrapPrefix | read-create | current | Used in conjunction with bgpPeergrAfiSafiTrapPrefix to determine whether BGP issues an SNMP trap when the number of prefixes received from peers in this peer g… |
| 1.2.826.1.5.7.1.43 | ColumnbgpPeergrConfigThreshold | read-create | current | A percentage of the limit set by bgpPeergrConfigMaxPrfx. When the number of prefixes received from peers in this peer group reaches this threshold, BGP issues … |
| 1.2.826.1.5.7.1.44 | ColumnbgpPeergrMaxPrfxHold | read-create | current | The time interval in seconds between when this BGP session is torn down due to the number of prefixes received from peers in this peer group exceeding the maxi… |
| 1.2.826.1.5.7.1.45 | ColumnbgpPeergrTrapGrHelperState | read-create | current | This value indicates whether or not the Graceful Restart helper trap is used. If in use for peers in this peer group, DC-BGP will send a trap whenever the peer… |
| 1.2.826.1.5.7.1.46 | ColumnbgpPeergrConfAltLocalAsMode | read-create | current | This field controls the operation of the alternative local AS number specified by the bgpPeergrConfAltLocalAs field for peers in this peer group. It has no eff… |
| 1.2.826.1.5.7.1.47 | ColumnbgpPeergrBfdDesired | read-create | current | Indicates whether Bidirectional Forwarding Detection (BFD) is desired for peers in this peer group. If the NM entity managing the peer session (configured usin… |
| 1.2.826.1.5.7.1.48 | ColumnbgpPeergrDmzLink | read-create | current | If the peer group is for eBGP (as dictated by bgpPeergrArea), this field indicates that all routes with IPv4 address family received from peers in this peer gr… |
| 1.2.826.1.5.7.1.49 | ColumnbgpPeergrRemovePrivate | read-write | current | Whether private AS numbers are removed from the AS path before sending an update to this peer. This is only relevant for an eBGP peer. |
| 1.2.826.1.5.7.1.50 | ColumnbgpPeergrAsOverride | read-write | current | Whether NBR AS numbers are replaced with Local AS number from the AS path before sending an update to this peer. This is only relevant for an eBGP peer. |
| 1.2.826.1.5.7.1.51 | ColumnbgpPeergrUpdateGroup | read-write | current | This field indicates that DC-BGP should treat each configured peer group for IBGP peers as an update group. This means that all the peers in the peer group wil… |
| 1.2.826.1.5.7.1.52 | ColumnbgpPeergrDistListAclIn | read-create | current | The Access List index identifying the Access List to use to filter routes received from peers in this peer group. If this index is non-zero and the Access List… |
| 1.2.826.1.5.7.1.53 | ColumnbgpPeergrDistListAclOut | read-create | current | The Access List index identifying the Access List to use to filter routes advertised to peers in this peer group. If this index is non-zero and the Access List… |
| 1.2.826.1.5.7.1.54 | ColumnbgpPeergrDistListPlIn | read-create | current | The Prefix List index identifying the Prefix List to use to filter routes received from peers in this peer group. If this index is non-zero and the Prefix List… |
| 1.2.826.1.5.7.1.55 | ColumnbgpPeergrDistListPlOut | read-create | current | The Prefix List index identifying the Prefix List to use to filter routes advertised to peers in this peer group. If this index is non-zero and the Prefix List… |
| 1.2.826.1.5.7.1.56 | ColumnbgpPeergrFilterListIn | read-create | current | The Filter List index identifying the Filter List to use to filter routes received from peers in this peer group. If this index is non-zero and the Filter List… |
| 1.2.826.1.5.7.1.57 | ColumnbgpPeergrFilterListOut | read-create | current | The Filter List index identifying the Filter List to use to filter routes advertised to peers in this peer group. If this index is non-zero and the Filter List… |
| 1.2.826.1.5.7.1.58 | ColumnbgpPeergrAddrSourceIf | read-create | current | Interface index for the interface from which the source address for peer sessions in this group is chosen. If non-zero, BGP will look for the first address on … |
| 1.2.826.1.5.7.1.59 | ColumnbgpPeergrUseImportLocalPref | read-create | current | This field defines whether the value in bgpPeergrImportLocalPref should be used to configure the local preference value assigned to routes received from the pe… |
| 1.2.826.1.5.7.1.60 | ColumnbgpPeergrImportLocalPref | read-create | current | Configures the local preference value assigned to routes received from the peers in this group. This overrides the value received from the peer. This field is … |
| 1.2.826.1.5.7.1.61 | ColumnbgpPeergrUseExportLocalPref | read-create | current | This field defines whether the value in bgpPeergrExportLocalPref should be used to configure the local preference value assigned to routes sent to the peers in… |
| 1.2.826.1.5.7.1.62 | ColumnbgpPeergrExportLocalPref | read-create | current | Configures the local preference value assigned to routes being sent to the peers in this group. This overrides the value already set for the local preference o… |
| 1.2.826.1.5.7.1.63 | ColumnbgpPeergrSlowPeer | read-create | current | Marks the peers as slow peers. When update groups are in use, slow peers are kept separate from other peers to prevent backpressure from the slow peers slowing… |
| 1.2.826.1.5.7.1.64 | ColumnbgpPeergrAddrSourceType | read-create | current | The address type of the bgpPeergrAddrSource field. Setting this field to the default value means that bgpPeergrAddrSource is unspecified. This field is ignored… |
| 1.2.826.1.5.7.1.65 | ColumnbgpPeergrAddrSource | read-create | current | If an address is specified with a type matching bgpPeergrRemoteAddrType, and bgpPeergrAddrSourceIf is NOT specified, then BGP will use this address as the sour… |
| 1.2.826.1.5.7.1.66 | ColumnbgpPeergrMaxPrfxClear | read-create | current | This object is used in conjunction with the address-family specific bgpPeergrAfiSafiMaxPrfxClear to control when a bgpPeerAfiSafiMaxPrefixClear trap is sent. T… |
| 1.2.826.1.5.7.1.67 | ColumnbgpPeergrPrfxThresholdClear | read-create | current | This object is used in conjunction with the address-family specific bgpPeergrAfiSafiPrfxThreshClear to control when a bgpPeerAfiSafiPrfxThrshldClear trap is se… |
| 1.2.826.1.5.7.1.68 | ColumnbgpPeergrTtlSecurityMinTtl | read-create | current | The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL S… |
| 1.2.826.1.5.7.1.69 | ColumnbgpPeergrRemovePrivateAs | read-create | current | Whether private AS numbers are removed from the AS path or replaced with the local AS number before sending an update to this peer. This is only relevant for a… |
| 1.2.826.1.5.7.1.70 | ColumnbgpPeergrResetPeerOnCfgChange | read-create | current | Certain configuration can only be changed while a peer session is not active. Setting this field to True will cause changes to those fields to reset all peer s… |
| 1.2.826.1.5.7.1.71 | ColumnbgpPeergrAdminStatus | read-write | current | All the peers configured under the peer can be shutdown. |
| 1.2.826.1.5.8 | TablebgpConfigTable | not-accessible | current | The table of Policy Configuration. |
| 1.2.826.1.5.8.1 | RowbgpConfigEntry | not-accessible | current | Each entry represents a policy configuration. |
| 1.2.826.1.5.8.1.2 | ColumnbgpConfigIndex | not-accessible | current | The index of this bgpConfigEntry. This is the Index of the Policy Configuration. |
| 1.2.826.1.5.8.1.3 | ColumnbgpConfigRowStatus | read-create | current | Used to create and delete a Policy Configuration. |
| 1.2.826.1.5.8.1.4 | ColumnbgpConfigRtgrimpe | read-create | obsolete | The index of the Route Map Group this configuration uses for permitted route imports. The default value of 0 means no route map group is defined. |
| 1.2.826.1.5.8.1.5 | ColumnbgpConfigRtgrimde | read-create | obsolete | The index of the Route Map Group this configuration uses for denied route imports. The default value of 0 means no route map group is defined. |
| 1.2.826.1.5.8.1.6 | ColumnbgpConfigRtgrexpe | read-create | obsolete | The index of the Route Map Group this configuration uses for permitted route exports. The default value of 0 means no route map group is defined. |
| 1.2.826.1.5.8.1.7 | ColumnbgpConfigRtgrexde | read-create | obsolete | The index of the Route Map Group this configuration uses for denied route exports. The default value of 0 means no route map group is defined. |
| 1.2.826.1.5.8.1.8 | ColumnbgpConfigDefImport | read-create | obsolete | Whether routes not covered by the two import route map groups are permitted or denied by default. |
| 1.2.826.1.5.8.1.9 | ColumnbgpConfigDefExport | read-create | obsolete | Whether routes not covered by the two export route map groups are permitted or denied by default. |
| 1.2.826.1.5.8.1.10 | ColumnbgpConfigNxtHopSlf | read-create | obsolete | This field is now retired. The function is provided by bgpPeerNxtHopSlf and bgpPeergrNxtHopSlf. |
| 1.2.826.1.5.8.1.11 | ColumnbgpConfigRemove | read-create | current | This field is now retired. The function is provided by bgpPeerRemovePrivateAs and bgpPeergrRemovePrivateAs. |
| 1.2.826.1.5.8.1.12 | ColumnbgpConfigImportMap | read-create | current | The index of the Route Map this configuration uses for route imports. The default value of 0 means no route map is defined, and all routes will be imported. If… |
| 1.2.826.1.5.8.1.13 | ColumnbgpConfigExportMap | read-create | current | The index of the Route Map this configuration uses for route exports. The default value of 0 means no route map is defined, and all routes will be exported. If… |
| 1.2.826.1.5.8.1.14 | ColumnbgpConfigAdvertiseMap | read-create | current | The index of the Route Map to use as an advertise map. This is only applicable to conditional advertisement. In order for the policy configuration to be valid,… |
| 1.2.826.1.5.8.1.15 | ColumnbgpConfigNonExistMap | read-create | current | The index of the Route Map to use as a non-exist map. This is only applicable to conditional advertisement - see the description of the bgpConfigAdvertiseMap f… |
| 1.2.826.1.5.8.1.16 | ColumnbgpConfigBlockCondAdv | read-only | current | Flag to indicate whether the route(s) that match the advertise route-map are currently being blocked from advertisement. |
| 1.2.826.1.5.8.1.17 | ColumnbgpConfigThirdPtyNxtHop | read-create | obsolete | This field is now retired. The function is provided by bgpPeerThirdPtyNxtHop and bgpPeergrThirdPtyNxtHop. |
| 1.2.826.1.5.8.1.18 | ColumnbgpConfigNxtHopPeer | read-create | obsolete | This field is now retired. The function is provided by bgpPeerNxtHopPeer and bgpPeergrNxtHopPeer. |
| 1.2.826.1.5.8.1.19 | ColumnbgpConfigCondAdvOn | read-create | current | Whether or not Conditional Advertisement is enabled. Set this to AMB_FALSE before changing the conditional advertisement configuration, as certain intermediate… |
| 1.2.826.1.5.9 | TablebgpFlapConfigTable | not-accessible | current | The table of Route Flap Damping configuration parameters. |
| 1.2.826.1.5.9.1 | RowbgpFlapConfigEntry | not-accessible | current | Each entry represents a set of configuration parameters used when damping a route. It is expected there will not be many entries in this table but no limit is … |
| 1.2.826.1.5.9.1.2 | ColumnbgpFlapConfigIndex | not-accessible | current | The index of this route flap configuration table entry. This is the index used to reference this route flap configuration from the BGP RIB Manager entity confi… |
| 1.2.826.1.5.9.1.3 | ColumnbgpFlapConfigRowStatus | read-create | current | Used to create and delete a flap config set. |
| 1.2.826.1.5.9.1.4 | ColumnbgpFlapConfigCut | read-create | current | The cutoff threshold expressed as a number of route withdrawals. Above this level, the route will be suppressed. This value must be greater than or equal to bg… |
| 1.2.826.1.5.9.1.5 | ColumnbgpFlapConfigReuse | read-create | current | The reuse threshold expressed as a number of route withdrawals. Below this level the route will be reused. The scale used is 100 times that used in RFC2439 so … |
| 1.2.826.1.5.9.1.6 | ColumnbgpFlapConfigThold | read-create | current | The maximum time a route can be suppressed for (held). This value must be less than or equal to bgpRmEntFlapReusemax in the bgpRmEntTable. |
| 1.2.826.1.5.9.1.7 | ColumnbgpFlapConfigDecayok | read-create | current | The decay half life of the stability figure while the route is still reachable (whether suppressed or not). This value must be less than bgpFlapConfigTmaxok. |
| 1.2.826.1.5.9.1.8 | ColumnbgpFlapConfigDecayng | read-create | current | The decay half life of the stability figure while the route is not reachable (whether suppressed or not). If it is not defined or set to zero, no decay occurs … |
| 1.2.826.1.5.9.1.9 | ColumnbgpFlapConfigTmaxok | read-create | current | The decay memory limit. The maximum time any memory of a previous instability is retained given the route state is unchanged and reachable. This is generally u… |
| 1.2.826.1.5.9.1.10 | ColumnbgpFlapConfigTmaxng | read-create | current | The decay memory limit. The maximum time any memory of a previous instability is retained given the route state is unchanged and unreachable. This is generally… |
| 1.2.826.1.5.10 | TablebgpAggregateTable | not-accessible | current | This table is used to control how DC-BGP aggregates addresses. Each entry in the table results in one aggregate address being created. This will result in an a… |
| 1.2.826.1.5.10.1 | RowbgpAggregateEntry | not-accessible | current | Each entry represents a member of an aggregate address option set. |
| 1.2.826.1.5.10.1.2 | ColumnbgpAggrAfi | not-accessible | current | The AFI of the aggregating address. |
| 1.2.826.1.5.10.1.3 | ColumnbgpAggrSafi | not-accessible | current | The SAFI of the aggregating address. |
| 1.2.826.1.5.10.1.4 | ColumnbgpAggrPrefix | not-accessible | current | The index of this bgpAggregateEntry. This is the prefix of the configured aggregating address. |
| 1.2.826.1.5.10.1.5 | ColumnbgpAggrPrefixLength | not-accessible | current | The index of this bgpAggregateEntry. This is the length of the prefix (in bits) of the configured aggregating address. |
| 1.2.826.1.5.10.1.6 | ColumnbgpAggrRowStatus | read-create | current | Used to create and delete an aggregate address option set. |
| 1.2.826.1.5.10.1.7 | ColumnbgpAggrOptions | read-create | current | Options applied to this set of aggregate addresses. Note with no options, more specific routes are installed in the routing table, but the AS_PATH will lose in… |
| 1.2.826.1.5.10.1.8 | ColumnbgpAggrSuppressMap | read-create | current | The index of the Route Map used to suppress routes. The match clauses of this route map are used to selectively suppress more specific routes from being advert… |
| 1.2.826.1.5.10.1.9 | ColumnbgpAggrExcludeMap | read-create | current | The index of a Route Map used to exclude aggregatable routes from this aggregate. The match clauses of this route map are used to select routes which, although… |
| 1.2.826.1.5.10.1.10 | ColumnbgpAggrAttributeMap | read-create | current | The index of the Route Map used to set aggregated routes attributes. The set clauses of this route map are used to set path attributes of the aggregated route. |
| 1.2.826.1.5.10.1.11 | ColumnbgpAggrPermanent | read-create | current | If this field is set to TRUE, an aggregate entry is created in the routing table and advertised to peers even if no more-specific matching routes are known. |
| 1.2.826.1.5.10.1.12 | ColumnbgpAggrProgramRejectRoute | read-create | current | If this field is set to TRUE, a REJECT route is configured in the AFM for this aggregate to catch any traffic that is not routed by the more specific routes. I… |
| 1.2.826.1.5.10.1.13 | ColumnbgpAggrInheritMap | read-create | current | If the aggregate is configured to inherit attributes from its aggregated routes (that is, if the asSet, summaryAsSet, asPrepend or summaryAsPrepend option is s… |
| 1.2.826.1.5.11 | TablebgpOrfCapabilityTable | not-accessible | current | DC-BGP ORF Capability Table. |
| 1.2.826.1.5.11.1 | RowbgpOrfCapabilityEntry | not-accessible | current | Entry containing information about support for an ORF defined by <AFI, SAFI, ORF Type>. |
| 1.2.826.1.5.11.1.2 | ColumnbgpOrfCapabilityAfi | not-accessible | current | Specifies the address family with which this ORF is associated. |
| 1.2.826.1.5.11.1.3 | ColumnbgpOrfCapabilitySafi | not-accessible | current | Specifies the Subsequent Address Family Identifier with which this ORF is associated. |
| 1.2.826.1.5.11.1.4 | ColumnbgpOrfCapabilityOrfType | not-accessible | current | Indicates the type of this ORF. |
| 1.2.826.1.5.11.1.5 | ColumnbgpOrfCapabilityAdminStatus | read-create | current | The administrative status for this ORF entry. |
| 1.2.826.1.5.11.1.6 | ColumnbgpOrfCapabilitySendReceive | read-create | current | Indicates whether the sender is (a) willing to receive ORF entries from its peer, (b) would like to send ORF entries to its peer, or (c) both. |
| 1.2.826.1.5.12 | TablebgpPeergrAfiSafiTable | not-accessible | current | Peer group <AFI, SAFI> configuration table. This table allows a user to configure peer group characteristics on a per AFI/SAFI basis. Rows in this table cannot… |
| 1.2.826.1.5.12.1 | RowbgpPeergrAfiSafiEntry | not-accessible | current | Peer group <AFI, SAFI> configuration table entry. |
| 1.2.826.1.5.12.1.3 | ColumnbgpPeergrAfiSafiAfi | not-accessible | current | The AFI index into the peer group <AFI, SAFI> table. |
| 1.2.826.1.5.12.1.4 | ColumnbgpPeergrAfiSafiSafi | not-accessible | current | The SAFI index into the peer group <AFI, SAFI> table. |
| 1.2.826.1.5.12.1.5 | ColumnbgpPeergrAfiSafiAllowLocalAs | read-create | current | The number of instances of the local AS identifier that may be contained in the route's AS-Path without rejecting the route. The AS-Path attribute of a BGP rou… |
| 1.2.826.1.5.12.1.6 | ColumnbgpPeergrAfiSafiDisSndLpDetect | read-create | current | Gives finer control of the sender-side loop detection configuration provided by bgpPeergrDisableSenderLoopDetect. By default, BGP performs sender side loop det… |
| 1.2.826.1.5.12.1.7 | ColumnbgpPeergrAfiSafiNxtHopSlf | read-create | current | Gives finer control of the next-hop-self configuration provided by bgpPeergrNxtHopSlf. If the bgpPeerAfiSafiUsePeerNxtHopSlf bit is set in the bgpPeergrAfiSafi… |
| 1.2.826.1.5.12.1.8 | ColumnbgpPeergrAfiSafiOrigDefault | read-create | current | Indicates whether BGP should originate a default route to the peer group for this address family. BGP cannot originate default VPN routes and so bgpPeergrAfiSa… |
| 1.2.826.1.5.12.1.9 | ColumnbgpPeergrAfiSafiOrigDefaultRtMap | read-create | current | Configured policy for origination of default routes. The value of bgpPeergrAfiSafiOrigDefaultRtMap is only examined if bgpPeergrAfiSafiOrigDefault is 'true'. I… |
| 1.2.826.1.5.12.1.10 | ColumnbgpPeergrAfiSafiSoftResetStore | read-create | current | Gives finer control of the soft reset configuration provided by bgpPeergrSoftResetWithStoredInfo. When bgpPeergrSoftResetWithStoredInfo is 'false', BGP does no… |
| 1.2.826.1.5.12.1.11 | ColumnbgpPeergrAfiSafiAddPathCapCfg | read-create | current | The configured BGP additional path capability for this peer group and address family. Valid values are: - AMB_BGP_ADD_PATH_SR_INHERIT Inherit configuration fro… |
| 1.2.826.1.5.12.1.12 | ColumnbgpPeergrAfiSafiAddPathBestN | read-create | current | The number of best paths to advertise to this peer group as additional paths for this AFI/SAFI. The number of candidate paths available to advertise to the pee… |
| 1.2.826.1.5.12.1.13 | ColumnbgpPeergrAfiSafiConfigMaxPrfx | read-create | current | Gives finer control of the maximum prefix configuration provided by bgpPeergrConfigMaxPrfx. To configure address family specific values for the maximum number … |
| 1.2.826.1.5.12.1.14 | ColumnbgpPeergrAfiSafiImportMap | read-create | current | The index of the Route Map to use for route imports from the peer group for this AFI/SAFI. Route import uses a single import route map - see the description of… |
| 1.2.826.1.5.12.1.15 | ColumnbgpPeergrAfiSafiExportMap | read-create | current | The index of the Route Map to use for route exports to the peer group for this AFI/SAFI. Route export uses a single export route map - see the description of t… |
| 1.2.826.1.5.12.1.16 | ColumnbgpPeergrAfiSafiImportIpPre | read-create | current | This field is deprecated. It is retained for back compatibility. Use the bgpPeergrAfiSafiImportIpAallPre field instead. The index of the IP prefix list to use … |
| 1.2.826.1.5.12.1.17 | ColumnbgpPeergrAfiSafiExportIpPre | read-create | current | This field is deprecated. It is retained for back compatibility. Use the bgpPeergrAfiSafiExportIpAallPre field instead. The index of the IP prefix list to use … |
| 1.2.826.1.5.12.1.18 | ColumnbgpPeergrAfiSafiConfigDropWarn | read-create | current | Gives finer control of the configuration provided by bgpPeergrConfigDropWarn, which determines the behavior when the maximum prefix limit is reached. To config… |
| 1.2.826.1.5.12.1.19 | ColumnbgpPeergrAfiSafiMaxOrfEntries | read-create | current | Gives finer control of the maximum number of ORF entries configuration provided by bgpPeergrMaxOrfEntries. To configure address family specific values for the … |
| 1.2.826.1.5.12.1.20 | ColumnbgpPeergrAfiSafiTrapPrefix | read-create | current | Gives finer control of the configuration provided by bgpPeergrTrapPrefix, which determines whether BGP issues an SNMP trap when the number of prefixes received… |
| 1.2.826.1.5.12.1.21 | ColumnbgpPeergrAfiSafiConfigThreshold | read-create | current | Gives finer control of the threshold configuration provided by bgpPeergrConfigThreshold. When the number of prefixes received from peers in this peer group for… |
| 1.2.826.1.5.12.1.22 | ColumnbgpPeergrAfiSafiMaxPrfxHold | read-create | current | Gives finer control of the configuration provided by bgpPeergrMaxPrfxHold, which determines the time interval in seconds between when this BGP session is torn … |
| 1.2.826.1.5.12.1.23 | ColumnbgpPeergrAfiSafiImportIpAallPre | read-create | current | The index of the AALL IP prefix access list to use for route imports from the peer group for this AFI/SAFI. Route import policy applies any import IP prefix ac… |
| 1.2.826.1.5.12.1.24 | ColumnbgpPeergrAfiSafiExportIpAallPre | read-create | current | The index of the AALL IP prefix access list to use for route exports to the peer group for this AFI/SAFI. Route export policy applies any export IP prefix acce… |
| 1.2.826.1.5.12.1.25 | ColumnbgpPeergrAfiSafiReflectorClient | read-create | current | This value indicates whether the given peer is a reflector client of this router for this AFI/SAFI, or not. A value of nonClient(0) indicates that this peer is… |
| 1.2.826.1.5.12.1.26 | ColumnbgpPeergrAfiSafiAsOverride | read-create | current | This field is used in conjunction with bgpPeergrAsOverride to indicate whether BGP should perform AS-override on routes advertised to the peers in this peer-gr… |
| 1.2.826.1.5.12.1.27 | ColumnbgpPeergrAfiSafiDisable | read-create | current | The meaning of this field is the same as bgpPeerAfiSafiDisable. This field is used for dynamic and configured peers. For a description of how this field is use… |
| 1.2.826.1.5.12.1.28 | ColumnbgpPeergrAfiSafiMinASOrigInt | read-create | current | Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes t… |
| 1.2.826.1.5.12.1.29 | ColumnbgpPeergrAfiSafiMinRteAdvertInt | read-create | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawin… |
| 1.2.826.1.5.12.1.30 | ColumnbgpPeergrAfiSafiMinRteWthdrawInt | read-create | current | Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a ro… |
| 1.2.826.1.5.12.1.31 | ColumnbgpPeergrAfiSafiSendComm | read-create | current | This field is used in conjunction with the bgpPeergrSendComm field in the bgpPeergrTable to indicate whether BGP will send UPDATE messages to the peer group me… |
| 1.2.826.1.5.12.1.32 | ColumnbgpPeergrAfiSafiSendExtComm | read-create | current | This field is used in conjunction with the bgpPeergrSendExtComm field in the bgpPeergrTable to indicate whether BGP will send UPDATE messages to the peer group… |
| 1.2.826.1.5.12.1.33 | ColumnbgpPeergrAfiSafiConfigUsage | read-create | current | A set of bit flags which controls whether peer group AFI/SAFI configuration is taken from this table or from peer group configuration. A bit flag exists for a … |
| 1.2.826.1.5.12.1.34 | ColumnbgpPeergrAfiSafiMaxPrfxClear | read-create | current | Gives finer control over the configuration provided by bgpPeergrMaxPrfxClear. To configure address family specific values, set bgpPeergrMaxPrfxClear to zero an… |
| 1.2.826.1.5.12.1.35 | ColumnbgpPeergrAfiSafiPrfxThreshClear | read-create | current | Gives finer control over the configuration provided by bgpPeergrPfrxThresholdClear. To configure address family specific values set bgpPeergrPrfxThresholdClear… |
| 1.2.826.1.5.12.1.36 | ColumnbgpPeergrAfiSafiPreserveNh | read-create | current | This field is used to preserve the BGP next hop when forwarding routes to eBGP peers in this peer group. By default, the next hop of a route is preserved when … |
| 1.2.826.1.5.12.1.37 | ColumnbgpPeergrAfiSafiAcceptRmtNxtHop | read-create | current | If set to false, then for any directly connected eBGP peers in the peer group, routes received from the peer with a next-hop that is not the peer's remote addr… |
| 1.2.826.1.5.13 | TablebgpAsPathAccessListTable | not-accessible | current | The table of DC-BGP AS Path Access Lists. An AS Path Access List is used to test whether the AS Path in a route matches the list. The AS Path is matched agains… |
| 1.2.826.1.5.13.1 | RowbgpAsPathAccessListEntry | not-accessible | current | Each entry represents one or more AS Paths |
| 1.2.826.1.5.13.1.2 | ColumnbgpAsPathListIndex | not-accessible | current | The AS Path List index. This identifies the AS Path List. |
| 1.2.826.1.5.13.1.3 | ColumnbgpAsPathListAsPathIndex | not-accessible | current | The index of this AS Path Entry in this AS Path List. |
| 1.2.826.1.5.13.1.4 | ColumnbgpAsPathListRowStatus | read-create | current | Used to create and delete an AS Path List entry. |
| 1.2.826.1.5.13.1.5 | ColumnbgpAsPathListAsPath | read-create | current | Contains the regular expression to use when matching the AS Path. This is stored here in ASCII format. AS numbers are matched as decimal numbers. For example, … |
| 1.2.826.1.5.13.1.6 | ColumnbgpAsPathListMatchType | read-create | current | The type of match represented by this AS Path List entry. A list entry with a match type of permit returns true if the AS Path matches the regular expression a… |
| 1.2.826.1.5.13.1.7 | ColumnbgpAsPathListMaOrigin | read-create | current | The value to match the Origin attribute against. This value is only used if bgpAsPathListMaOriginDef is TRUE. |
| 1.2.826.1.5.13.1.8 | ColumnbgpAsPathListMaOriginDef | read-create | current | Whether or not the value in bgpAsPathListMaOrigin should be used for matching. |
| 1.2.826.1.5.14 | TablebgpCommunityListTable | not-accessible | current | The table of DC-BGP Community List entries. A Community List is used to match against communities in a route or to set communities in a route. A Community List… |
| 1.2.826.1.5.14.1 | RowbgpCommunityListEntry | not-accessible | current | Each entry represents a BGP Community |
| 1.2.826.1.5.14.1.2 | ColumnbgpCommunityListIndex | not-accessible | current | The Community List index. This identifies the Community List. |
| 1.2.826.1.5.14.1.3 | ColumnbgpCommunityListEntryIndex | not-accessible | current | The index of this entry in the Community List. This ordering is important when the Community List is used to match against communities in a route. |
| 1.2.826.1.5.14.1.4 | ColumnbgpCommunityListRowStatus | read-create | current | Used to create and delete a Community List entry. |
| 1.2.826.1.5.14.1.5 | ColumnbgpCommunityListCommunity | read-create | current | Contains a single community value. This field is deprecated and should not be used. To use a single community for a Community List entry, create a Community Gr… |
| 1.2.826.1.5.14.1.6 | ColumnbgpCommunityListEntryType | read-create | current | This field indicates how this entry is used to match route commmunities. - If 'community-group', the route communities are matched against entries in the bgpCo… |
| 1.2.826.1.5.14.1.7 | ColumnbgpCommunityListPermit | read-create | current | When matching routes, this field indicates whether the set of matched routes should be permitted or denied. When setting routes, this Community List entry is i… |
| 1.2.826.1.5.14.1.8 | ColumnbgpCommunityListRegexp | read-create | current | Contains the regular expression to use when matching elements of the community list for a route. This is stored here in ASCII format. Communities are matched u… |
| 1.2.826.1.5.15 | TablebgpExtCommListTable | not-accessible | current | The table of DC-BGP Extended Community List entries. An Extended Community List is used to match against extended communities in a route or to set extended com… |
| 1.2.826.1.5.15.1 | RowbgpExtCommListEntry | not-accessible | current | Each entry represents a BGP Extended Community |
| 1.2.826.1.5.15.1.2 | ColumnbgpExtCommListIndex | not-accessible | current | The Extended Community List index. This identifies the Extended Community List. |
| 1.2.826.1.5.15.1.3 | ColumnbgpExtCommListEntryIndex | not-accessible | current | The index of this entry in the Extended Community List. This ordering is important when the Extended Community List is used to match against extended communiti… |
| 1.2.826.1.5.15.1.4 | ColumnbgpExtCommListRowStatus | read-create | current | Used to create and delete an Extended Community List entry. |
| 1.2.826.1.5.15.1.5 | ColumnbgpExtCommListCommunity | read-create | current | Contains a single extended community value. This field is deprecated and should not be used. To use a single extended community for an Extended Community List … |
| 1.2.826.1.5.15.1.6 | ColumnbgpExtCommListEntryType | read-create | current | This field indicates how this entry is used to match route extended commmunities. - If 'community-group', the route extended communities are matched against en… |
| 1.2.826.1.5.15.1.7 | ColumnbgpExtCommListPermit | read-create | current | When matching routes, this field indicates whether the set of matched routes should be permitted or denied. When setting routes, this Extended Community List e… |
| 1.2.826.1.5.15.1.8 | ColumnbgpExtCommListRegexp | read-create | current | Contains the regular expression to use when matching elements of the extended community list for a route. This is stored here in ASCII format. Extended communi… |
| 1.2.826.1.5.16 | TablebgpCommunityGroupTable | not-accessible | current | The table of DC-BGP Community Group entries. Each entry in this table contains a single community. A Community List entry with an event type of 'community-grou… |
| 1.2.826.1.5.16.1 | RowbgpCommunityGroupEntry | not-accessible | current | Each entry represents a BGP Community |
| 1.2.826.1.5.16.1.4 | ColumnbgpCommunityGroupCommunity | not-accessible | current | The community value to use when matching against or setting the route communities. Note that the community value itself is used as an index field. This is OK a… |
| 1.2.826.1.5.16.1.5 | ColumnbgpCommunityGroupRowStatus | read-create | current | Used to create and delete a Community Group entry. |
| 1.2.826.1.5.17 | TablebgpExtCommGroupTable | not-accessible | current | The table of DC-BGP Extended Community Group entries. Each entry in this table contains a single extended community. An Extended Community List entry with an e… |
| 1.2.826.1.5.17.1 | RowbgpExtCommGroupEntry | not-accessible | current | Each entry represents a BGP Extended Community |
| 1.2.826.1.5.17.1.4 | ColumnbgpExtCommGroupCommunity | not-accessible | current | The extended community value to use when matching against or setting the route extended communities. Note that the extended community value itself is used as a… |
| 1.2.826.1.5.17.1.5 | ColumnbgpExtCommGroupRowStatus | read-create | current | Used to create and delete an Extended Community. |
| 1.2.826.1.6 | NodebgpHaf | |||
| 1.2.826.1.6.1 | TablebgpRmAfmJoinTable | not-accessible | current | Each entry in this table represents a join to an AFM for which a RIB Manager entity is master. |
| 1.2.826.1.6.1.1 | RowbgpRmAfmJoinEntry | not-accessible | current | Each entry represents a join to an AFM for which a RIB Manager entity is master. |
| 1.2.826.1.6.1.1.2 | ColumnbgpRmAfmJoin | not-accessible | current | Identifies a join for which a RIB Manager entity is master. |
| 1.2.826.1.6.1.1.3 | ColumnbgpRmAfmRowStatus | read-create | current | The row status for this table entry, used to create and destroy table entries. |
| 1.2.826.1.6.1.1.4 | ColumnbgpRmAfmAdminStatus | read-create | current | The administrative status of this table entry, used to activate and deactivate the join. |
| 1.2.826.1.6.1.1.5 | ColumnbgpRmAfmOperStatus | read-only | current | The current operational status of this join. |
| 1.2.826.1.6.1.1.6 | ColumnbgpRmAfmPartnerIndex | read-create | current | Index that identifies the slave entity for this join. |
| 1.2.826.1.6.1.1.7 | ColumnbgpRmAfmAfi | read-create | current | Address Family Identifier for this join. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.6.1.1.8 | ColumnbgpRmAfmSafi | read-create | current | Subsequent Address Family Identifier for this join. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.6.1.1.9 | ColumnbgpRmAfmJoinStatus | read-only | current | The status of the master join. |
| 1.2.826.1.6.1.1.10 | ColumnbgpRmAfmRestartTime | read-create | current | This is the maximum time that DC-BGP will retain routes from this AFM following failure of this join. DC-BGP will delete all retained stale routes from this AF… |
| 1.2.826.1.6.2 | TablebgpRmNmTable | not-accessible | current | This table contains information on slave joins to Neighbor Manager entities. Each row in this table represents one slave join in a particular RIB Manager entit… |
| 1.2.826.1.6.2.1 | RowbgpRmNmEntry | not-accessible | current | Represents a join to a Neighbor Manager for which the RIB Manager is slave. |
| 1.2.826.1.6.2.1.2 | ColumnbgpRmNmMasterIndex | not-accessible | current | Index of the master entity. This is the index received in the join registration info sent from the master to the slave on the join registration IPS. |
| 1.2.826.1.6.2.1.3 | ColumnbgpRmNmJoinStatus | read-only | current | The status of the slave join. |
| 1.2.826.1.6.3 | TablebgpNmMjTable | not-accessible | current | Each entry in this table represents a join for which a Neighbor Manager entity is master. This table always contains exactly three rows, one each for the joins… |
| 1.2.826.1.6.3.1 | RowbgpNmMjEntry | not-accessible | current | Each entry represents a join for which a Neighbor Manager entity is master. |
| 1.2.826.1.6.3.1.1 | ColumnbgpNmMjEntity | not-accessible | current | Identifies a Neighbor Manager Entity. |
| 1.2.826.1.6.3.1.2 | ColumnbgpNmMjJoin | not-accessible | current | Identifies a join for which a Neighbor Manager entity is master. |
| 1.2.826.1.6.3.1.3 | ColumnbgpNmMjJoinPartner | read-only | current | Identifies the type of process acting as slave on this join. |
| 1.2.826.1.6.3.1.4 | ColumnbgpNmMjPartnerIndex | read-only | current | The index assigned to this join by NM. This index is used by FTI-specific handling code within System Manager to identify the entity index of a slave entity su… |
| 1.2.826.1.6.3.1.5 | ColumnbgpNmMjJoinStatus | read-only | current | The status of the master join. |
| 1.2.826.1.6.4 | TablebgpRmArinhJoinTable | not-accessible | current | This read-only table contains information on Active Route Interface slave joins used for querying next hops. Each row in this table represents one slave join i… |
| 1.2.826.1.6.4.1 | RowbgpRmArinhJoinEntry | not-accessible | current | Represents an ARI join for which the RIB Manager is slave. |
| 1.2.826.1.6.4.1.2 | ColumnbgpRmArinhAfi | not-accessible | current | Specifies the address family identifier with which this ARI join is associated. |
| 1.2.826.1.6.4.1.3 | ColumnbgpRmArinhSafi | not-accessible | current | Specifies the subsequent address family identifier with which this ARI join is associated. |
| 1.2.826.1.6.4.1.4 | ColumnbgpRmArinhJoinStatus | read-only | current | The status of the ARI slave join for querying next hops. |
| 1.2.826.1.6.4.1.5 | ColumnbgpRmArinhEntIndex | read-only | current | Identifies the ARI provider entity. |
| 1.2.826.1.7 | NodebgpNm | |||
| 1.2.826.1.7.1 | TablebgpNmEntTable | not-accessible | current | Each entry in this table represents a Neighbor Manager entity. Fields in an entry cannot be changed while the admin status is up. |
| 1.2.826.1.7.1.1 | RowbgpNmEntEntry | not-accessible | current | Each entry represents a Neighbor Manager entity. |
| 1.2.826.1.7.1.1.1 | ColumnbgpNmEntIndex | not-accessible | current | Identifies the Neighbor Manager entity which should handle this listen socket. |
| 1.2.826.1.7.1.1.2 | ColumnbgpNmEntRowStatus | read-create | current | The row status for this Neighbor Manager Entity Table entry, used to create and destroy table entries. |
| 1.2.826.1.7.1.1.3 | ColumnbgpNmEntAdminStatus | read-create | current | The administrative status of this Neighbor Manager entity, used to activate and deactivate NM. |
| 1.2.826.1.7.1.1.4 | ColumnbgpNmEntOperStatus | read-only | current | The current operational status of this Neighbor Manager entity. |
| 1.2.826.1.7.1.1.5 | ColumnbgpNmEntRmIndex | read-create | current | Identifies a RIB Manager entity to which the Neighbor Manager will join. This index is mapped to an RM entity index by FTI-Specific Handling code within System… |
| 1.2.826.1.7.1.1.6 | ColumnbgpNmEntSckIndex | read-create | current | Identifies the SCK stub entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable s… |
| 1.2.826.1.7.1.1.7 | ColumnbgpNmEntBfdEntityIndex | read-create | current | Identifies a BFD stub entity to which the Neighbor Manager will join. A value of zero indicates that no BFD provider is available, or that NM should not join t… |
| 1.2.826.1.7.1.1.8 | ColumnbgpNmEntDebug | read-write | current | This field is used to set debug flags of BGP Instance. |
| 1.2.826.1.7.1.1.9 | ColumnbgpNmEntLevel | read-write | current | This field is used to set debug level of BGP Instance. |
| 1.2.826.1.7.1.1.10 | ColumnbgpNmEntAllFlagsEnabled | read-write | current | This field is used to determine all flags enabled. |
| 1.2.826.1.7.1.1.11 | ColumnbgpNmEntRtiName | read-write | current | This value describes routing instance name. This value is passed, while configuring the routing instance. |
| 1.2.826.1.7.1.1.12 | ColumnbgpNmEntTenantName | read-write | current | This value describes org name. |
| 1.2.826.1.7.1.1.13 | ColumnbgpNmEntTenantId | read-write | current | This value describes org id. |
| 1.2.826.1.7.1.1.14 | ColumnbgpNmBgpNbrUpCount | read-only | current | Number of bgp peers in up state per tenant. |
| 1.2.826.1.7.1.1.15 | ColumnbgpNmBgpNbrDownCount | read-only | current | Number of bgp peers in down state per tenant. |
| 1.2.826.1.7.1.1.16 | ColumnbgpNmEntEnableAlarms | read-write | current | This value describes alarms enabled or not. |
| 1.2.826.1.7.1.1.17 | ColumnbgpNmEntBranchName | read-write | current | This value describes branch name. |
| 1.2.826.1.7.1.1.18 | ColumnbgpNmEntVrfName | read-create | current | The text name of the VRF in which this entity instance is running. If this field is a zero-length string then it is assumed that this entity instance is runnin… |
| 1.2.826.1.7.1.1.19 | ColumnbgpNmEntCliId | read-write | current | This value describes bgp instance cli id. |
| 1.2.826.1.7.2 | TablebgpNmListenTable | not-accessible | current | Each entry in this table represents a listen socket in the Neighbor Manager entity. |
| 1.2.826.1.7.2.1 | RowbgpNmListenEntry | not-accessible | current | Each entry represents a listen socket. |
| 1.2.826.1.7.2.1.2 | ColumnbgpNmListenIndex | not-accessible | current | Identifies this listen socket since each NM instance can have more than one Listen socket configured. |
| 1.2.826.1.7.2.1.3 | ColumnbgpNmListenRowStatus | read-create | current | The row status for this Neighbor Manager Listen Table entry, used to create and destroy table entries. |
| 1.2.826.1.7.2.1.4 | ColumnbgpNmListenAdminStatus | read-create | current | The administrative status of this Listen entry, used to activate and deactivate the Listen socket. |
| 1.2.826.1.7.2.1.5 | ColumnbgpNmListenOperStatus | read-only | current | The current operational status of this Listen socket. |
| 1.2.826.1.7.2.1.6 | ColumnbgpNmListenAddrType | read-create | current | The address family of the address used to listen on. This determines the format of the bgpNmListenAddr field. This field can only be changed when the Admin Sta… |
| 1.2.826.1.7.2.1.7 | ColumnbgpNmListenAddr | read-create | current | The address used to listen on. This field can only be changed when the Admin Status is down. If set to a zero length address DC-BGP will listen on all addresse… |
| 1.2.826.1.7.2.1.8 | ColumnbgpNmListenPort | read-create | current | The port used to listen on. This field can only be changed when the Admin Status is down. |
| 1.2.826.1.7.2.1.9 | ColumnbgpNmListenAcceptAll | read-create | current | This is set to TRUE if this socket will accept incoming connections from any peer. The recommended value is FALSE. This field can only be changed when the Admi… |
| 1.2.826.1.7.2.1.10 | ColumnbgpNmListenAddrScopeId | read-create | current | The scope ID of the bgpNmListenAddr. The scope ID is required if the address is an IPv6 link-local address. Otherwise, this field must be set to zero. This fie… |
| 1.2.826.1.7.3 | TablebgpPeerNmDebugTable | not-accessible | current | BGP peer debug table. This table allows a user to control BGP peer debug operations. This table contains entries for both configured and dynamic peers. Rows in… |
| 1.2.826.1.7.3.1 | RowbgpPeerNmDebugEntry | not-accessible | current | Entry containing information about the status of a BGP peer debug flags. |
| 1.2.826.1.7.3.1.2 | ColumnbgpPeerNmDebugAddrType | not-accessible | current | The address family of the remote address prefix. Valid values are: ipv4 and ipv6. Type ipv6 is only accepted if bgpRmEntSupportIpv6 is TRUE. |
| 1.2.826.1.7.3.1.3 | ColumnbgpPeerNmDebugAddr | read-write | current | This field is used to set peer ip for setting debug flags. |
| 1.2.826.1.7.3.1.4 | ColumnbgpPeerNmDebugRowStatus | read-create | current | The row status for this peer range table entry, used to create and destroy table entries. |
| 1.2.826.1.7.3.1.5 | ColumnbgpPeerNmDebugDebug | read-write | current | This field is used to set debug flags of BGP Peer. |
| 1.2.826.1.7.3.1.6 | ColumnbgpPeerNmDebugLevel | read-write | current | This field is used to set debug level of BGP Peer. |
| 1.2.826.1.7.3.1.7 | ColumnbgpPeerNmDebugAllFlagsEnabled | read-write | current | This field is used to determine all flags enabled. |
| 1.2.826.1.8 | NodebgpNotification | |||
| 1.2.826.1.8.1 | NodebgpNotificationEntry | |||
| 1.2.826.1.8.1.1 | ScalarbgpNotifPeerLocalAddrType | accessible-for-notify | current | Version of bgpPeerLocalAddrType used for notifications. |
| 1.2.826.1.8.1.2 | ScalarbgpNotifPeerLocalAddr | accessible-for-notify | current | Version of bgpPeerLocalAddr used for notifications. |
| 1.2.826.1.8.1.3 | ScalarbgpNotifPeerRemoteAddrType | accessible-for-notify | current | Version of bgpPeerRemoteAddrType used for notifications. |
| 1.2.826.1.8.1.4 | ScalarbgpNotifPeerRemoteAddr | accessible-for-notify | current | Version of bgpPeerRemoteAddr used for notifications. |
| 1.2.826.1.8.1.5 | ScalarbgpNotifRmEntIndex | accessible-for-notify | current | Version of bgpRmEntIndex used for notifications. |
| 1.2.826.1.8.1.6 | ScalarbgpNotifPeerLocalPort | accessible-for-notify | current | Version of bgpPeerLocalPort used for notifications. |
| 1.2.826.1.8.1.7 | ScalarbgpNotifPeerRemotePort | accessible-for-notify | current | Version of bgpPeerRemotePort used for notifications. |
| 1.2.826.1.8.1.8 | ScalarbgpPeerLastFailureCause | accessible-for-notify | current | The cause of a Backwards Transition trap. If this is not a Backwards Transition trap this is set to zero. |
| 1.2.826.1.8.1.9 | ScalarbgpNotifPeerLocalAddrScopeId | accessible-for-notify | current | Version of bgpPeerLocalAddrScopeId used for notifications. |
| 1.2.826.1.8.1.10 | ScalarbgpRmEntOverLimit | accessible-for-notify | current | AMB_TRUE if DC-BGP's RIB contains more prefixes than the value of bgpRmEntRibSizeWarning defines. |
| 1.2.826.1.8.1.11 | ScalarbgpNotifAfi | accessible-for-notify | current | The AFI for the address family to which this trap relates. |
| 1.2.826.1.8.1.12 | ScalarbgpNotifSafi | accessible-for-notify | current | The SAFI for the subsequent address family to which this trap relates. |
| 1.2.826.1.8.1.13 | ScalarbgpNotifPeerOldFsmState | accessible-for-notify | current | The highest previous FSM state achieved since the last AMB_BGP_BACKWARDS MIB TRAP was sent. This is used for the bgpPeerSessionBackward trap and is otherwise s… |
| 1.2.826.1.8.1.14 | ScalarbgpNotifPeerTenantName | accessible-for-notify | current | Tenant Name of the BGP instance. |
| 1.2.826.1.9 | NodebgpConformance | |||
| 1.2.826.1.9.1 | NodebgpCompliances | |||
| 1.2.826.1.9.1.1 | CompliancebgpCompliance | current | The compliance statement for entities which implement the DC-BGP mib. | |
| 1.2.826.1.9.2 | NodebgpGroups | |||
| 1.2.826.1.9.2.1 | GroupbgpRmEntityGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the RIB Manager Entity table. | |
| 1.2.826.1.9.2.2 | GroupbgpRmAfmJoinGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the RM AFM Join table. | |
| 1.2.826.1.9.2.3 | GroupbgpRmNmGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the RM NM Join table. | |
| 1.2.826.1.9.2.4 | GroupbgpNmMjGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the NM Master Join table. | |
| 1.2.826.1.9.2.5 | GroupbgpNmEntGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Neighbor Manager Entity table. | |
| 1.2.826.1.9.2.6 | GroupbgpNmListenGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Neighbor Manager Listen table. | |
| 1.2.826.1.9.2.7 | GroupbgpPeerGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Peer tables. | |
| 1.2.826.1.9.2.8 | GroupbgpPathAttributesGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Nlri tables. | |
| 1.2.826.1.9.2.9 | GroupbgpPolicyGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Policy tables. | |
| 1.2.826.1.9.2.10 | GroupbgpRmEntityOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the RIB Manager Entity table. | |
| 1.2.826.1.9.2.11 | GroupbgpRmAfmJoinOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the AFM table. | |
| 1.2.826.1.9.2.12 | GroupbgpNmListenOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the Listen table. | |
| 1.2.826.1.9.2.13 | GroupbgpPeerOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the Peer table. | |
| 1.2.826.1.9.2.14 | GroupbgpPathAttributesOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the path attributes tables. | |
| 1.2.826.1.9.2.15 | GroupbgpPolicyOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the policy tables. | |
| 1.2.826.1.9.2.16 | GroupbgpNotificationsGroup | current | The notifications group is completely optional. | |
| 1.2.826.1.9.2.17 | GroupbgpObsoleteGroup | obsolete | This group contains obsolete objects. | |
| 1.2.826.1.9.2.18 | GroupbgpRmAfiSafiGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the AFI SAFI tables. | |
| 1.2.826.1.9.2.19 | GroupbgpRmAfiSafiOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the AFI SAFI table. | |
| 1.2.826.1.9.2.20 | GroupbgpAdjRibOutGroup | current | This group contains objects that are read-only, and is completely optional. | |
| 1.2.826.1.9.2.21 | GroupbgpOrfCapabilityGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the ORF Capability table. | |
| 1.2.826.1.9.2.22 | GroupbgpOrfCapabilityOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the ORF Capability table. | |
| 1.2.826.1.9.2.23 | GroupbgpPeerAfiSafiOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the peer AFI/SAFI table. | |
| 1.2.826.1.9.2.24 | GroupbgpPeergrAfiSafiOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the peer group AFI/SAFI table. | |
| 1.2.826.1.9.2.25 | GroupbgpPeerOrfCapabilityGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Peer ORF Capability table. | |
| 1.2.826.1.9.2.26 | GroupbgpPeerOrfCapabilityOptionalGrp | current | This group contains objects that are defaultable and can optionally be configured in the Peer ORF Capability table. | |
| 1.2.826.1.9.2.27 | GroupbgpRmArinhJoinGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the RM ARI Join table. | |
| 1.2.826.1.9.2.28 | GroupbgpNmEntOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the Neighbor Manager Entity table. | |
| 1.2.826.1.9.2.29 | GroupbgpNotificationObjectGroup | current | The objects used to record notification parameters. This group is completely optional. | |
| 1.2.826.1.9.2.30 | GroupbgpPeerStatusOptionalGroup | current | This group contains mandatory, non-defaultable or read-only objects in the peer status table. | |
| 1.2.826.1.9.2.31 | GroupbgpPeerAfiSafiStOptionalGroup | current | This group contains mandatory, non-defaultable or read-only objects in the peer status AFI/SAFI table. | |
| 1.2.826.1.9.2.32 | GroupbgpPeerRangeGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the peer range table. | |
| 1.2.826.1.9.2.33 | GroupbgpPeerRangeOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the peer range table. | |
| 1.2.826.1.9.2.34 | GroupbgpAsPathAccessListGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the AS Path Access List table. | |
| 1.2.826.1.9.2.35 | GroupbgpAsPathAccessListOptionalGroup | current | This group contains objects that are defaultable and can optionally be configured in the AS Path Access List table. | |
| 1.2.826.1.9.2.36 | GroupbgpCommunityListGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Community List table. | |
| 1.2.826.1.9.2.37 | GroupbgpExtCommListGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Extended Community List table. | |
| 1.2.826.1.9.2.38 | GroupbgpCommunityGroupGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Community Group table. | |
| 1.2.826.1.9.2.39 | GroupbgpExtCommGroupGroup | current | This group is mandatory for all agent implementations. It contains mandatory, non-defaultable or read-only objects in the Extended Community Group table. | |
| 1.2.826.1.9.2.40 | GroupbgpUpdateGroupGroup | current | This group contains mandatory, non-defaultable or read-only objects in the Update Group table. | |
| 1.2.826.1.9.2.41 | GroupbgpUpdateGroupMembershipGroup | current | This group contains mandatory, non-defaultable or read-only objects in the Update Group Membership table. | |
| 1.2.826.1.9.2.42 | GroupbgpPropObsoleteGroup | obsolete | Obsolete objects. | |
| 1.2.826.1.10 | TablebgpPeerRangeTable | not-accessible | current | Peer range table. This table allows a user to configure BGP dynamic neighbors. Instead of being configured individually in the BGP peer table, BGP dynamic neig… |
| 1.2.826.1.10.1 | RowbgpPeerRangeEntry | not-accessible | current | Each entry represents a Peer Range entity. |
| 1.2.826.1.10.1.2 | ColumnbgpPeerRangeRemoteAddrType | not-accessible | current | The address family of the remote address prefix. Valid values are: ipv4 and ipv6. Type ipv6 is only accepted if bgpRmEntSupportIpv6 is TRUE. |
| 1.2.826.1.10.1.3 | ColumnbgpPeerRangeRemoteAddr | not-accessible | current | The remote address prefix. The length must be consistent with bgpPeerRangeRemoteAddrType, 4 for ipv4 and 16 for ipv6. The prefix length is specified by bgpPeer… |
| 1.2.826.1.10.1.4 | ColumnbgpPeerRangeRemotePrefixLen | not-accessible | current | The remote address prefix length in bits. |
| 1.2.826.1.10.1.5 | ColumnbgpPeerRangeRemoteAddrScopeId | not-accessible | current | The scope ID of the remote address prefix. The scope ID is required if the address is an IPv6 link-local address. Otherwise, this field must be set to zero. |
| 1.2.826.1.10.1.6 | ColumnbgpPeerRangeRowStatus | read-create | current | The row status for this peer range table entry, used to create and destroy table entries. |
| 1.2.826.1.10.1.7 | ColumnbgpPeerRangeAdminStatus | read-create | current | The administrative status of this table entry, used to activate and deactivate the peer range. |
| 1.2.826.1.10.1.8 | ColumnbgpPeerRangeConfigPeergr | read-create | current | The index of the peer group that neighbors in this peer range belongs to. The peer range must be assigned to a peer group so this field cannot be set to zero. … |
| 1.2.826.1.10.1.9 | ColumnbgpPeerRangeNumPeers | read-only | current | The current number of dynamic BGP peers for this peer range. |
| 1.2.826.1.10.1.10 | ColumnbgpPeerRangeMaxPeers | read-create | current | The maximum number of dynamic BGP peers for this peer range, or zero if there is no limit. If this limit is reached then DC-BGP rejects incoming connections fr… |
| 1.2.826.1.11 | NodebgpUpdateGroup | |||
| 1.2.826.1.11.1 | TablebgpUpdateGroupTable | not-accessible | current | The table of DC-BGP Update Groups. |
| 1.2.826.1.11.1.1 | RowbgpUpdateGroupEntry | not-accessible | current | Entry containing information about a BGP Update Group |
| 1.2.826.1.11.1.1.2 | ColumnbgpUpdateGroupIndex | not-accessible | current | Identifies an update group. |
| 1.2.826.1.11.1.1.3 | ColumnbgpUpdateGroupMemberCount | read-only | current | The count of members in this update group. The members can be found by looking in the bgpUpdateGroupMembershipTable. |
| 1.2.826.1.11.1.1.4 | ColumnbgpUpdateGroupAfi | read-only | current | The address family for this update group. |
| 1.2.826.1.11.1.1.5 | ColumnbgpUpdateGroupSafi | read-only | current | The subsequent address family for this update group. |
| 1.2.826.1.11.1.1.6 | ColumnbgpUpdateGroupLocalAddressAfi | read-only | current | The AFI of the local address used if next-hop-self is in use. |
| 1.2.826.1.11.1.1.7 | ColumnbgpUpdateGroupLocalAddressSafi | read-only | current | The SAFI of the local address used if next-hop-self is in use. |
| 1.2.826.1.11.1.1.8 | ColumnbgpUpdateGroupLocalAddressLength | read-only | current | The length, in bytes, of the local address used if next-hop-self is in use. |
| 1.2.826.1.11.1.1.9 | ColumnbgpUpdateGroupAsSize | read-only | current | The number of bytes (agreed with the neighbor) that are used for AS numbers. |
| 1.2.826.1.11.1.1.10 | ColumnbgpUpdateGroupNeighborInSameAs | read-only | current | Whether the neighbor is in the same AS as this router. |
| 1.2.826.1.11.1.1.11 | ColumnbgpUpdateGroupConfedMember | read-only | current | Whether the neighbor is in the same confederation as this router. |
| 1.2.826.1.11.1.1.12 | ColumnbgpUpdateGroupConfAltLocalAs | read-only | current | The configured alternative local AS number for the session to the peers. |
| 1.2.826.1.11.1.1.13 | ColumnbgpUpdateGroupSelectedLocalAs | read-only | current | The local AS number for the session to the peers. |
| 1.2.826.1.11.1.1.14 | ColumnbgpUpdateGroupAltLocalAsMode | read-only | current | The alternative local AS number mode. |
| 1.2.826.1.11.1.1.15 | ColumnbgpUpdateGroupAggregateConfed | read-only | current | Whether or not the neighbor understands aggregated confederation AS_PATH information. |
| 1.2.826.1.11.1.1.16 | ColumnbgpUpdateGroupReflectorClient | read-only | current | The peer's type of Route Reflector client. |
| 1.2.826.1.11.1.1.17 | ColumnbgpUpdateGroupNextHopSelf | read-only | current | Whether or not next-hop-self is configured. |
| 1.2.826.1.11.1.1.18 | ColumnbgpUpdateGroupTPNHEnabled | read-only | current | Whether or not third-party next hop is enabled. |
| 1.2.826.1.11.1.1.19 | ColumnbgpUpdateGroupTPNHAddrType | read-only | current | The third-party next hop address type. |
| 1.2.826.1.11.1.1.20 | ColumnbgpUpdateGroupTPNHAddrPrefix | read-only | current | Prefix to match on for third-party next hop. The prefix length is specified by bgpUpdateGroupTPNHAddrPrefixLen. If third-party next hop is disabled for this pe… |
| 1.2.826.1.11.1.1.21 | ColumnbgpUpdateGroupTPNHAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the Third Party Next Hop Address Prefix field. |
| 1.2.826.1.11.1.1.22 | ColumnbgpUpdateGroupPeeringType | read-only | current | The type of peering relationship associated with the peer. |
| 1.2.826.1.11.1.1.23 | ColumnbgpUpdateGroupSlowPeer | read-only | current | Whether the peer has been marked as slow. |
| 1.2.826.1.11.1.1.24 | ColumnbgpUpdateGroupRmvPrivASNums | read-only | current | Whether private AS numbers are removed from the AS path before sending an update to the peer. |
| 1.2.826.1.11.1.1.25 | ColumnbgpUpdateGroupCondAdv | read-only | current | Whether conditional advertisement is enabled. |
| 1.2.826.1.11.1.1.26 | ColumnbgpUpdateGroupCAAdvMap | read-only | current | The index of the route map used as the advertise map for conditional advertisement. |
| 1.2.826.1.11.1.1.27 | ColumnbgpUpdateGroupCANExMap | read-only | current | The index of the route map used as the non-exist map for conditional advertisement. |
| 1.2.826.1.11.1.1.28 | ColumnbgpUpdateGroupConfExpMap | read-only | current | The index of the route map used for filtering exported routes, specified in the peer's configuration. |
| 1.2.826.1.11.1.1.29 | ColumnbgpUpdateGroupSendComm | read-only | current | Whether or not to send BGP community attributes. |
| 1.2.826.1.11.1.1.30 | ColumnbgpUpdateGroupSendExtComm | read-only | current | Whether or not to send BGP extended community attributes. |
| 1.2.826.1.11.1.1.31 | ColumnbgpUpdateGroupOrigDflt | read-only | current | Whether BGP should originate a default route. |
| 1.2.826.1.11.1.1.32 | ColumnbgpUpdateGroupOrigDfltRtMap | read-only | current | The index of the route map that is used for default routes. This is zero if originate_default is false. |
| 1.2.826.1.11.1.1.33 | ColumnbgpUpdateGroupAddPathSend | read-only | current | The negotiated BGP additional path (ADD-PATH) send capability. |
| 1.2.826.1.11.1.1.34 | ColumnbgpUpdateGroupAddPathBestN | read-only | current | The number of best paths to advertise to these peers as additional paths. |
| 1.2.826.1.11.1.1.35 | ColumnbgpUpdateGroupDistListAclOut | read-only | current | The Access List index identifying the Access List used to filter routes advertised. Zero indicates no Access List. |
| 1.2.826.1.11.1.1.36 | ColumnbgpUpdateGroupDistListPlOut | read-only | current | The Prefix List index identifying the Prefix List used to filter routes advertised. Zero indicates no Prefix List. |
| 1.2.826.1.11.1.1.37 | ColumnbgpUpdateGroupFilterListOut | read-only | current | The Filter List index identifying the Filter List used to filter routes advertised. Zero indicates no Filter List. |
| 1.2.826.1.11.1.1.38 | ColumnbgpUpdateGroupExportMapIndex | read-only | current | The index of the route map used for filtering exported routes. |
| 1.2.826.1.11.1.1.39 | ColumnbgpUpdateGroupExportPreIsAall | read-only | current | Whether the export prefix list is an AALL IP prefix access list. |
| 1.2.826.1.11.1.1.40 | ColumnbgpUpdateGroupExportIpPre | read-only | current | The index of the prefix list used for route exports. |
| 1.2.826.1.11.1.1.41 | ColumnbgpUpdateGroupUseExportLocalPref | read-only | current | Whether the peers in this update group have an override local preference value configured. |
| 1.2.826.1.11.1.1.42 | ColumnbgpUpdateGroupExportLocalPref | read-only | current | The override local preference value used for updates sent to the peers in this group. Zero if an override value is not in use. |
| 1.2.826.1.11.1.1.43 | ColumnbgpUpdateGroupMinASOrigInt | read-only | current | Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes t… |
| 1.2.826.1.11.1.1.44 | ColumnbgpUpdateGroupMinRtAdvertiseInt | read-only | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawin… |
| 1.2.826.1.11.1.1.45 | ColumnbgpUpdateGroupMinRtWithdrawInt | read-only | current | Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a ro… |
| 1.2.826.1.11.1.1.46 | ColumnbgpUpdateGroupPreserveNh | read-only | current | Indicates whether the BGP next hop is preserved when forwarding routes to eBGP peers in this update group. |
| 1.2.826.1.11.2 | TablebgpUpdateGroupMembershipTable | not-accessible | current | The table of DC-BGP Update Group Members. |
| 1.2.826.1.11.2.1 | RowbgpUpdateGroupMembershipEntry | not-accessible | current | Entry containing information about a BGP Update Group Member |
| 1.2.826.1.11.2.1.4 | ColumnbgpUpdGpMbrLocalAddrType | read-only | current | The address family of the local address configured for the peering session. For configured peers this field has the same value as bgpPeerLocalAddrType for the … |
| 1.2.826.1.11.2.1.5 | ColumnbgpUpdGpMbrLocalAddr | read-only | current | The local address configured for the peering session, or a zero length address if not specified. For configured peers this field has the same value as bgpPeerL… |
| 1.2.826.1.11.2.1.6 | ColumnbgpUpdGpMbrLocalPort | read-only | current | The local port configured for the peering session, or zero if not specified. For configured peers this field has the same value as bgpPeerLocalPort for the cor… |
| 1.2.826.1.11.2.1.7 | ColumnbgpUpdGpMbrRemoteAddrType | read-only | current | The address family of the remote address for the peering session. For configured peers this field has the same value as bgpPeerRemoteAddrType for the correspon… |
| 1.2.826.1.11.2.1.8 | ColumnbgpUpdGpMbrRemoteAddr | read-only | current | The remote address for the peering session. For configured peers this field has the same value as bgpPeerRemoteAddr for the corresponding row in the BGP peer c… |
| 1.2.826.1.11.2.1.9 | ColumnbgpUpdGpMbrRemotePort | read-only | current | The remote port configured for the peering session, or zero if not specified. For configured peers this field has the same value as bgpPeerRemotePort for the c… |
| 1.2.826.1.11.2.1.10 | ColumnbgpUpdGpMbrLocalAddrScopeId | read-only | current | For a configured peer identified only by interface (bgpPeerLocalAddr and bgpPeerRemoteAddr are both zero), this is the interface index of the local point-to-po… |
| 1.2.826.1.11.2.1.11 | ColumnbgpUpdGpMbrAfi | read-only | current | The AFI of the update group. |
| 1.2.826.1.11.2.1.12 | ColumnbgpUpdGpMbrSafi | read-only | current | The SAFI of the update group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BgpAddPathSrCap | INTEGER { disable (0), receive (1), send (2), both (3), inherit (4), unknown (5) } | current | BGP additional path send/receive capability. |
| BgpAdminStatus | INTEGER { adminStatusUp(1), adminStatusDown(2) } | current | The desired administrative state of an entry. |
| BgpAfi | INTEGER { other(0), ipv4(1), ipv6(2), l2vpn(25) } | current | The representation of a BGP AFI (Address Family Identifier) |
| BgpAfiSafiBits | BITS { ipv4Unicast(0), ipv4Multicast(1), ipv4MplsBgpVpn(2), ipv6Unicast(3), ipv6Multicast(4), ipv6MplsBgpVpn(5), ipv4Labeled(6), ipv6Labeled(7), l2vpnVpls(8), l2vpnEvpn(9) , ipv4VersaPrivate(10) , ipv4Private(11) , ipv4MplsBgpMVpn(12) , ipv6MplsBgpMVpn(13) } | current | Bit flags used to indicate one or more AFI/SAFI combinations. |
| BgpAggregateOptions | INTEGER { none(1), summary(2), asSet(3), summaryAsSet(4), asAppend(5), summaryAsAppend(6) } | current | The option used when aggregating. |
| BgpAsPathAction | INTEGER { none(0), set(1), remMatch(2), remMatchAndSet(3) } | current | How to handle setting an AS-Path attribute. |
| BgpAsSize | INTEGER { twoOctet(1), fourOctet(2) } | current | The size of the AS number. |
| BgpAutonomousSystemNumber | Unsigned32 | current | An autonomous System Number. If bgpAsSize is two-octet, the range is 0..65535. If it is four-octet, it is the full range of Unsigned32. |
| BgpCapabilities | BITS { mpIpv4Unicast(0), mpIpv4Multicast(1), mpIpv4Vpn(2), mpIpv4Label(3), mpIpv6Unicast(4), mpIpv6Multicast(5), mpIpv6Vpn(6), mpIpv6Label(7), routeRefresh(8), gracefulRestart(9), routeRefreshCisco(10), outboundRouteFilter(11), outboundRouteFilterCisco(12), fourOctetAs(13), mpL2vpnVpls(14), addPath(15), mpL2vpnEvpn(16), mpIpv4VersaPrivate(17), versaPrivateRouteVer1(18), versaPrivateRouteVer2(19), versaBranchName(20), mpIpv4MulticastVpn(21), mpIpv6MulticastVpn(22), mpIpv4Private(23), enhancedRouteRefresh(24), extendedNextHopIpv4Uni(25), extendedNextHopIpv4Multi(26), extendedNextHopIpv4Label(27), extendedNextHopIpv4Vpn(28) } | current | The capabilities advertised by a BGP instance. |
| BgpCeaseErrorSubcode | INTEGER { none(0), adminShutdown(2), peerUnconfig(3), adminReset(4), configChange(6), noResource(8) } | current | The error subcode to be sent in the Cease Notification message. |
| BgpCommListEntryType | INTEGER { communityGroup(1), regularExpression(2) } | current | How an entry in the bgpCommunityListTable is used to match route commmunities or an entry in the bgpExtCommListTable is used to match route extended commmunities. |
| BgpCommunity | OCTET STRING (SIZE(4)) | current | The representation of a BGP Community. |
| BgpCommunityAction | INTEGER { none(0), removeAll(1), removeSpecific(2), setSpecific(3), removeAllAndSet(4) } | current | How to handle adding a community attribute. |
| BgpComponentId | INTEGER { componentRm(1), componentNm(2), componentIpSockets(3), componentRtm(4), componentVmIpv4(5), componentBfd(6) } | current | The type of process to which a given entity is joined. |
| BgpDebugFlags | BITS { bfd(0), keepalive(1), notification(2), open(3), packets(4), policy(5), receive(6), refresh(7), route(8), sdwan(9), send(10), state(11), update(12), interface(13), ips(14), fsm(15) } | current | Indicates whether to log debug information for a given bgp feature. |
| BgpDropOrWarn | INTEGER { drop(1), warn(2) } | current | Whether to drop a session or just warn a parameter has been exceeded. |
| BgpExtendedCommunity | OCTET STRING (SIZE(8)) | current | The representation of a BGP Extended Community. |
| BgpIbgpOrEbgp | INTEGER { ibgp(1), ebgp(2), ebgpconfed(3) } | current | Whether this is an IBGP, confederation EBGP, or EBGP peer group. |
| BgpIdentifier | OCTET STRING (SIZE (4)) | current | The representation of a BGP Identifier. |
| BgpIpMatchType | INTEGER { nlriAddr(1), sourceAddr(2), nextHopAddr(3) } | current | The type of match carried out by the route map for this IP prefix list. |
| BgpMedDeltaType | INTEGER { increment(1), decrement(2) } | current | Whether to increment or decrement an MED value. |
| BgpMjStatus | INTEGER { mjNotJoined(1), mjSentAddJoin(2), mjSentRegister(3), mjJoinActive(4), mjSentDelJoin(5), mjSentUnregister(6), mjJoinGone(7), mjFailedToRegister(8), mjFailingOver(9), mjFailed(10), mjNoPartner(11) } | current | The status of a master join. |
| BgpNextHopSelf | INTEGER { true (1), false (2), all (3) } | current | The next hop action to apply. For back compatibility the values of 'yes' and 'no' are the same as the values of the truth values 'true' and 'false' respectively. |
| BgpNlriIsActiveFlag | INTEGER { notTracked(1), inactive(2), active(3) } | current | Indicates whether an NLRI is active in the routing table. |
| BgpNlriPeerTypes | INTEGER { none(1), iBGP(2), eBGP(3) } | current | The type of peer than a route was received from. |
| BgpOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of an entity. |
| BgpOrfAssociation | INTEGER { noAssociation(0), local(1), remote(2) } | current | Indicates the type of association (if any) to the Outbound Route Filtering protocol. |
| BgpOrfSendReceive | INTEGER { receive(1), send(2), both(3) } | current | ORF send/receive indicator. |
| BgpOrfType | INTEGER { community(2), extCommunity(3), prefix(64) } | current | Type of Outbound Route Filter. |
| BgpOriginCode | INTEGER { originIgp(0), originEgp(1), originIncomplete(2) } | current | A BGP origin code. |
| BgpPathAttrAtomicAggPresence | INTEGER { atomicAggregatePresent(1), atomicAggregateMissing(2) } | current | Whether the route has the ATOMIC_AGGREGATE Path Attribute present. |
| BgpPeerAfiSafiCfgFromGrFlags | BITS { bgpPeerAfiSafiUseGrDisable(0), bgpPeerAfiSafiUseGrAllowLocalAS(1), bgpPeerAfiSafiUseGrDisableSndLpDetect(2), bgpPeerAfiSafiUseGrAfiSafiNxtHopSlf(3), bgpPeerAfiSafiUseGrAfiSafiOrigDefault(4), bgpPeerAfiSafiUseGrAfiSafiOrigDfltRtMap(5), bgpPeerAfiSafiUseGrAfiSafiSoftResetStore(6), bgpPeerAfiSafiUseGrAfiSafiConfigMaxPrfx(7), bgpPeerAfiSafiUseGrAfiSafiConfigDropWarn(8), bgpPeerAfiSafiUseGrTrapPrefix(9), bgpPeerAfiSafiUseGrConfigThreshold(10), bgpPeerAfiSafiUseGrMaxPrfxHold(11), bgpPeerAfiSafiUseGrMaxOrfEntries(12), bgpPeerAfiSafiUseGrAddPathCapCfg(13), bgpPeerAfiSafiUseGrAddPathBestN(14), bgpPeerAfiSafiUseGrImportMap(15), bgpPeerAfiSafiUseGrExportMap(16), bgpPeerAfiSafiUseGrImportAallPre(17), bgpPeerAfiSafiUseGrExportAallPre(18), bgpPeerAfiSafiUseGrReflectorClient(19), bgpPeerAfiSafiUseGrAsOverride(20), bgpPeerAfiSafiUseGrAsOrigInt(21), bgpPeerAfiSafiUseGrMinRteAdvertInt(22), bgpPeerAfiSafiUseGrMinRteWithdrawInt(23), bgpPeerAfiSafiUseGrSendComm(24), bgpPeerAfiSafiUseGrSendExtComm(25), bgpPeerAfiSafiUseGrMaxPrfxClear(26), bgpPeerAfiSafiUseGrPrfxThrsholdClear(27), bgpPeerAfiSafiUseGrPreserveNh(28), bgpPeerAfiSafiUseGrAcceptRmtNxtHop(29) } | current | A set of bit flags which control whether peer AFI/SAFI configuration is taken from peer group level configuration (bgpPeergrTable or bgpPeergrAfiSafiTable), or from the configuration indicated by bgpPeerConfigUsage (and… |
| BgpPeerAfiSafiCfgUsage | BITS { bgpPeerAfiSafiUsePeerMinAdInt(0), bgpPeerAfiSafiUsePeerNxtHopSlf(1) } | current | Bit flags used to control whether the peer / peer group uses peer / peer group configuration or AFI/SAFI configuration for individual MIB fields. If set, the peer / peer group should use the peer / peer group configurat… |
| BgpPeerConfigStates | INTEGER { stateUpToDate (1), stateOutOfDateAdminDown (2), stateOutOfDateRowInactive (3) } | current | Reports the state of the peer configuration. |
| BgpPeerConfigUsage | BITS { bgpPeerUseGrpPassword(0), bgpPeerUseGrpReflClient(1), bgpPeerUseGrpHoldTime(2), bgpPeerUseGrpKeepAlive(3), bgpPeerUseGrpTtl(4), bgpPeerUseGrpMinRteAdvInt(5), bgpPeerUseGrpMinRteWthInt(6), bgpPeerUseGrpMaxPrefix(7), bgpPeerUseGrpAltLocalAs(8), bgpPeerUseGrpAggrConfedAs(9), bgpPeerUseGrpThrdPtyNxtHp(10), bgpPeerUseGrpNxtHopPeer(11), bgpPeerUseGrpSendComm(12), bgpPeerUseGrpSendExtComm(13), bgpPeerUseGrpSoftReset(14), bgpPeerUseGrpAllowLocalAs(15), bgpPeerUseGrpDisLoopDetect(16), bgpPeerUseGrpPeerWeight(17), bgpPeerUseGrpFallover(18), bgpPeerUseGrpRemoteAs(19), bgpPeerUseGrpCheckFirstAs(20), bgpPeerUseGrpNxtHopSlf(21), bgpPeerUseGrpEnableAttrDisc(22), bgpPeerUseGrpDmzLink(23), bgpPeerUseGrpDlAclIn(24), bgpPeerUseGrpDlAclOut(25), bgpPeerUseGrpDlPlIn(26), bgpPeerUseGrpDlPlOut(27), bgpPeerUseGrpFilterListIn(28), bgpPeerUseGrpFilterListOut(29), bgpPeerUseGrpSlowPeer(30), bgpPeerUseGrpAfiSafiDisable(31) } | current | Bit flags used to control whether the peer uses the peer configuration or the peer group configuration for individual MIB fields. If set, the peer should use the peer group configuration value rather than the peer confi… |
| BgpPeerConfigUsage2 | BITS { bgpPeerUseGrpConfedMember(0), bgpPeerUseGrpTrapEstab(1), bgpPeerUseGrpTrapBackw(2), bgpPeerUseGrpConnectRetryInt(3), bgpPeerUseGrpMinASOrigInt(4), bgpPeerUseGrpConfigDropWarn(5), bgpPeerUseGrpConfigPassive(6), bgpPeerUseGrpConfigOpenDelay(7), bgpPeerUseGrpConfigIdleHold(8), bgpPeerUseGrpCheckNextHop(9), bgpPeerUseGrpMaxOrfEntries(10), bgpPeerUseGrpPeeringType(11), bgpPeerUseGrpDisRouteRefr(12), bgpPeerUseGrpTrapPrefix(13), bgpPeerUseGrpConfigThresh(14), bgpPeerUseGrpMaxPrfxHold(15), bgpPeerUseGrpTrapGrHlpState(16), bgpPeerUseGrpConfAltLocAsMd(17), bgpPeerUseGrpBfdDesired(18), bgpPeerUseGrpAsOverride(19), bgpPeerUseGrpImportMap(20), bgpPeerUseGrpExportMap(21), bgpPeerUseGrpRemove(22), bgpPeerUseGrpAddrSrcIf(23), bgpPeerUseGrpImportLocalPref(24), bgpPeerUseGrpExportLocalPref(25), bgpPeerASUseGrpAddPathBestN(26), bgpPeerASUseGrpAddPathCapCfg(27), bgpPeerASUseGrpExpIpAallPre(28), bgpPeerASUseGrpImpIpAallPre(29), bgpPeerASUseGrpOrigDflt(30), bgpPeerASUseGrpOrigDfltRtMap(31) } | current | Bit flags used to control whether the peer uses the peer configuration or the peer group configuration for individual MIB fields. If set, the peer should use the peer group configuration value rather than the peer confi… |
| BgpPeerConfigUsage3 | BITS { bgpPeerUseGrpAddrSource(0), bgpPeerUseGrpAfiSafiImportMap(1), bgpPeerUseGrpAfiSafiExportMap(2), bgpPeerUseGrpMaxPrfxClear(3), bgpPeerUseGrpPrfxThresholdClear(4), bgpPeerUseGrpAfiSafiPreserveNh(5), bgpPeerUseGrpTtlSecurityMinTtl(6), bgpPeerUseGrpAfiSafiRmtNxtHop(7) } | current | Bit flags used to control whether the peer uses the peer configuration or the peer group configuration for individual MIB fields. If set, the peer should use the peer group configuration value rather than the peer confi… |
| BgpPeerEvents | INTEGER { noEvent(0), start(1), stop(2), transportOpen(3), transportClosed(4), transportOpenFailed(5), transportFatalError(6), connectRetryTimer(7), holdTimer(8), keepaliverTimer(9), recvOpen(10), recvKeepAlive(11), recvUpdate(12), recvNotification(13), connParmsUpdate(14) } | current | An event that has occurred to a connection to a BGP peer. |
| BgpPeeringType | INTEGER { unspecified(0), provider(1), customer(2), biLateral(3) } | current | Indicates the type of peering relationship with the peer. |
| BgpPeerLastFailure | INTEGER { other(1), notifySent(2), notifyRecv(3) } | current | The cause of the last failure to occur to a session to a BGP peer. |
| BgpPeerOrAfm | INTEGER { peerIndex(1), afmIndex(2), noIndex(3) } | current | Whether an index refers to a BGP Peer Index or an AFM index. |
| BgpPeerReflectorClientType | INTEGER { nonClient(0), client(1), meshedClient(2) } | current | What type of client this BGP Peer is. A client of a route reflector is a meshed client if and only if it is fully meshed with all meshed clients of that route reflector. |
| BgpPeerRestartStatus | INTEGER { notRestarting(1), restartTimerRunning(2), stalePathTimerRunning(3) } | current | The current status of a restarting BGP peer. |
| BgpPeerRestartSupport | INTEGER { none(1), awareOnly(2), enabled(3) } | current | The level of restart support advertised by a peer. |
| BgpPeerStates | INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } | current | The current state of a connection to a BGP peer. |
| BgpPermitOrDeny | INTEGER { permit(1), deny(2) } | current | Whether the behavior is to permit or deny. |
| BgpPrivAsActs | INTEGER { remove (1), none (2), removeAll (3), replace (4), replaceAll (5) } | current | What action to take when exporting routes whose AS-path contains private AS numbers to eBGP peers. |
| BgpReasonNotBest | INTEGER { notConsidered(0), routeIsBest(1), weight(2), localPref(3), localOrigPreferred(4), asPathLen(5), origin(6), med(7), localOrigTieBreaker(8), ebgpVsibgp(9), adminDistance(10), pathCostToNextHop(11), prefExisting(12), identifier(13), clusterLen(14), peerType(15), peerAddress(16), peerPort(17), pathId(18), grStale(19) } | current | Reports the reason a route was determined to be not the best route to that destination. |
| BgpRestartExitReason | INTEGER { none (1), inProgress (2), completed (3), timedOut (4), failed (5), completePeerNoSupport (6) } | current | The reason for exiting an attempted graceful restart. |
| BgpSafi | INTEGER { none(0), unicast(1), multicast(2), both(3), labeled(4), vpls(65), evpn(70), mplsBgpVpn(128), mplsBgpMVpn(129), private(241) , versaPrivate(248) } | current | The representation of a BGP SAFI (Sub-Address Family Identifier) |
| BgpSjStatus | INTEGER { sjNotJoined(1), sjJoined(2), sjJoinActive(3), sjJoinUnreg(4), sjJoinGone(5), sjFailingOver(6), sjFailed(7) } | current | The status of a slave join. |
| BgpTrueFalseOrInherit | INTEGER { inherit(0), true(1), false(2) } | current | Indicates whether support for a feature is true, false, or is determined by the entity default. |