DC-CR-LDP-MIB
67 objects
The MIB module for management of the DC-CR-LDP product
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.15 | Identitydccrldp | The MIB module for management of the DC-CR-LDP product | ||
| 1.3.6.1.4.1.629.10.15.1 | NodedccrldpObjects | |||
| 1.3.6.1.4.1.629.10.15.1.1 | TabledccrldpSigTable | not-accessible | current | The table of active instances of DC-CR-LDP Signaling. |
| 1.3.6.1.4.1.629.10.15.1.1.1 | RowdccrldpSigEntry | not-accessible | current | Each of these entries represents an instance of DC-CR-LDP Signaling running in the HAF. Some of these instances will be the primary, and others may be backups. |
| 1.3.6.1.4.1.629.10.15.1.1.1.1 | ColumndccrldpSigIndex | not-accessible | current | The index of this dccrldpSigEntry. This is the HAF entity index passed on the product create parameters. |
| 1.3.6.1.4.1.629.10.15.1.1.1.2 | ColumndccrldpSigPathManagerIndex | read-create | current | The index of the Path Manager instance to which this instance of Signaling is to join. See dccrldpPmTable. |
| 1.3.6.1.4.1.629.10.15.1.1.1.3 | ColumndccrldpSigLsrIndex | read-create | current | The index of the DC-LMGR product instance to which this DC-CR-LDP Signaling is to join as its LDB interface provider. See dclmgrLsrEntityTable. |
| 1.3.6.1.4.1.629.10.15.1.1.1.4 | ColumndccrldpSigSocketIfIndex | read-create | current | Management assigned interface identifier for the IP Sockets component interface to DC-CR-LDP Signalling. |
| 1.3.6.1.4.1.629.10.15.1.1.1.5 | ColumndccrldpSigSessionBufPoolSize | read-create | current | The number of pre-reserved buffers available for sending sockets and LDI messages for each LDP session. This is used to pace the sockets and LDI data flows for… |
| 1.3.6.1.4.1.629.10.15.1.1.1.6 | ColumndccrldpSigEMBufPoolSize | read-create | current | The number of pre-reserved buffers available for sending sockets, LDBI, NHR and I3 messages within Entity Manager This is used to pace Entity Manager's sockets… |
| 1.3.6.1.4.1.629.10.15.1.1.1.7 | ColumndccrldpSigAMBufPoolSize | read-create | current | The number of pre-reserved buffers available for sending sockets messages within Adjacency Manager. This is used to pace Adjacency Manager's sockets data flows. |
| 1.3.6.1.4.1.629.10.15.1.1.1.8 | ColumndccrldpSigAdminStatus | read-create | current | This object is used to activate the DC-CR-LDP Signaling instance. |
| 1.3.6.1.4.1.629.10.15.1.1.1.9 | ColumndccrldpSigOperStatus | read-only | current | The current operational status of this instance of DC-CR-LDP Signaling. |
| 1.3.6.1.4.1.629.10.15.1.1.1.10 | ColumndccrldpSigRowStatus | read-create | current | Used to create and delete a DC-CR-LDP Signaling Table entry. When this object is set to 'active', only the dccrldpSigAdminStatus object in the row may be modif… |
| 1.3.6.1.4.1.629.10.15.1.1.1.11 | ColumndccrldpSigUseI3Interface | read-create | current | Used to indicate whether this DC-CR-LDP Signaling instance should use the I3 interface or the IPR interface to determine information regarding local interface … |
| 1.3.6.1.4.1.629.10.15.1.1.1.12 | ColumndccrldpSigConformanceFlags | read-create | current | Flags specifying how DC-LDP Session Controller should behave in situations either where the interpretation of strict conformance is debatable, or where strictl… |
| 1.3.6.1.4.1.629.10.15.1.1.1.13 | ColumndccrldpSigUseIPv6Transport | read-create | current | Used to indicate whether the DC-CR-LDP signaling is to use IPv6 transport where possible. Note that if DC-LDP is configured with an IPv4 transport address, IPv… |
| 1.3.6.1.4.1.629.10.15.1.1.1.14 | ColumndccrldpSigSessStatusTrapEnable | read-create | current | If this object is true, then it enables the generation of mplsLdpSessionUp and mplsLdpSessionDown traps, otherwise these traps are not generated. |
| 1.3.6.1.4.1.629.10.15.1.1.1.15 | ColumndccrldpSigSessThreshTrapEnable | read-create | current | If this object is true, then it enables the generation of mplsLdpInitSessionThresholdExceeded traps, otherwise these traps are not generated. |
| 1.3.6.1.4.1.629.10.15.1.1.1.16 | ColumndccrldpSigPathVecLimitTrapEnable | read-create | current | If this object is true, then it enables the generation of mplsLdpPathVectorLimitMismatch traps, otherwise these traps are not generated. |
| 1.3.6.1.4.1.629.10.15.1.1.1.17 | ColumndccrldpSigBfdProviderIndex | read-create | current | The index of the BFDI provider instance to which this DC-LDP Signaling is to join as its BFD interface provider. See bfdEntityTable. Zero indicates that no BFD… |
| 1.3.6.1.4.1.629.10.15.1.2 | TabledccrldpPmTable | not-accessible | current | The table of active instances of DC-CR-LDP Path Manager. |
| 1.3.6.1.4.1.629.10.15.1.2.1 | RowdccrldpPmEntry | not-accessible | current | Each of these entries represents an instance of DC-CR-LDP Path Manager running in the HAF. Some of these instances will be the primary, and others may be backu… |
| 1.3.6.1.4.1.629.10.15.1.2.1.1 | ColumndccrldpPmIndex | not-accessible | current | The index of this dccrldpPmEntry. This is the HAF entity index passed on the product create parameters. |
| 1.3.6.1.4.1.629.10.15.1.2.1.2 | ColumndccrldpPmLsrIndex | read-create | current | The index of the DC-LMGR product instance to which this DC-CR-LDP Path Manager is to join as its LDB interface provider. See dclmgrLsrEntityTable. |
| 1.3.6.1.4.1.629.10.15.1.2.1.3 | ColumndccrldpPmLdpEntityAutoCreate | read-create | current | When set to 'true', the Entity Manager component of DC-CR-LDP creates Entities automatically based on interfaces known to Entity Manager. When set to 'false' E… |
| 1.3.6.1.4.1.629.10.15.1.2.1.4 | ColumndccrldpPmLdpEntityAutoStart | read-create | current | When set to 'true', the Entity Manager component of DC-CR-LDP automatically starts Entities. Both configured and automatically created Entities are automatical… |
| 1.3.6.1.4.1.629.10.15.1.2.1.5 | ColumndccrldpPmLdpEntityReuse | read-create | current | When set to 'true', the same Entity can be used for multiple interfaces. That is, the per-platform label space behaves as a per-interface label space. When set… |
| 1.3.6.1.4.1.629.10.15.1.2.1.6 | ColumndccrldpPmLdpVersion | read-create | current | An indication of the LDP version supported. |
| 1.3.6.1.4.1.629.10.15.1.2.1.7 | ColumndccrldpPmUseLdpFt | read-create | current | When set to 'true', DC-CR-LDP implements fault tolerance procedures for LDP and CR-LDP. When set to 'false', fault tolerance procedures are not used. |
| 1.3.6.1.4.1.629.10.15.1.2.1.8 | ColumndccrldpPmAsNumber | read-create | current | The number identifying the autonomous system (AS) to which this node belongs. |
| 1.3.6.1.4.1.629.10.15.1.2.1.9 | ColumndccrldpPmIprBufPoolSize | read-create | current | The size of the buffer pool used for sending either (deprecated) IPRI messages or for sending NHR and I3 messages. This is used to pace IPR/NHR+I3 data flows f… |
| 1.3.6.1.4.1.629.10.15.1.2.1.10 | ColumndccrldpPmLdpSupported | read-create | current | When set to 'true', DC-CR-LDP implements LDP functionality. When set to 'false' received LDP requests are rejected. Note that at least one of dccrldpPmLdpSuppo… |
| 1.3.6.1.4.1.629.10.15.1.2.1.11 | ColumndccrldpPmCrLdpSupported | read-create | current | When set to 'true', DC-CR-LDP implements CR-LDP functionality. When set to 'false' received CR-LDP requests are rejected. Note that at least one of dccrldpPmLd… |
| 1.3.6.1.4.1.629.10.15.1.2.1.12 | ColumndccrldpPmQueryFECSupported | read-create | current | When set to 'true', DC-CR-LDP queries the routing stub when a label mapping for an unrecognized FEC is received to determine whether the FEC should be recogniz… |
| 1.3.6.1.4.1.629.10.15.1.2.1.13 | ColumndccrldpPmAdminStatus | read-create | current | This object is used to activate the DC-CR-LDP Path Manager instance. |
| 1.3.6.1.4.1.629.10.15.1.2.1.14 | ColumndccrldpPmOperStatus | read-only | current | The current operational status of this instance of DC-CR-LDP Path Manager. |
| 1.3.6.1.4.1.629.10.15.1.2.1.15 | ColumndccrldpPmRowStatus | read-create | current | Used to create and delete a DC-CR-LDP Path Manager Table entry. When this object is set to 'active', only the dccrldpPmAdminStatus object in the row may be mod… |
| 1.3.6.1.4.1.629.10.15.1.2.1.16 | ColumndccrldpPmRestartCapable | read-create | current | A flag to indicate whether the local node should advertise itself as LDP restart capable if the Label Switch Controller or Label Data Forwarder is capable of s… |
| 1.3.6.1.4.1.629.10.15.1.2.1.17 | ColumndccrldpPmReconnectTime | read-create | current | The time that the local node takes to restart LDP and bring up the LDP sessions. This is advertised to neighbors in the FT Session TLV in Initialization messag… |
| 1.3.6.1.4.1.629.10.15.1.2.1.18 | ColumndccrldpPmRecoveryTime | read-create | current | The period of time that the local node is willing to retain its MPLS forwarding state, if any, that it preserved across the restart. The time is from the end o… |
| 1.3.6.1.4.1.629.10.15.1.2.1.19 | ColumndccrldpPmMaxPeerReconnect | read-create | current | The maximum period of time that LDP should wait for a restart capable neighbor to restore an LDP session. LDP waits for the minimum of this time and the Reconn… |
| 1.3.6.1.4.1.629.10.15.1.2.1.20 | ColumndccrldpPmMaxPeerRecovery | read-create | current | The maximum period of time that LDP should wait for a restart capable neighbor to refresh Label Mappings previously received from that neighbor before deleting… |
| 1.3.6.1.4.1.629.10.15.1.2.1.21 | ColumndccrldpPmAdjDwnHoldTime | read-create | current | The time to hold a failed LDP Hello adjacency to distinguish between LDP peer failure and interface failure. This field is used to ensure that LDP retains adja… |
| 1.3.6.1.4.1.629.10.15.1.2.1.22 | ColumndccrldpPmOutSegProgOrder | read-create | current | This determines the order in which LDP connects and releases out segments. default: This will release all out-segments on a session before programming new out-… |
| 1.3.6.1.4.1.629.10.15.1.2.1.23 | ColumndccrldpPmSupportIpv6 | read-create | current | This field indicates whether LDP Path Manager supports IPv6 addresses, FECs and routes. If this field is set to false then no IPv6 addresses will be accepted o… |
| 1.3.6.1.4.1.629.10.15.1.2.1.24 | ColumndccrldpPmPolicySupportFlags | read-create | current | This field contains bit flags which indicate whether DC-LDP supports LDP Policy and if per FEC policy optimization is to be used. The supported bit flags are -… |
| 1.3.6.1.4.1.629.10.15.1.2.1.25 | ColumndccrldpPmCheckOutSegIntfaceStat | read-create | current | This field indicates whether LDP Path Manager makes the programming of each out segment conditional on the status of the interface where the out segment is pro… |
| 1.3.6.1.4.1.629.10.15.1.2.1.26 | ColumndccrldpPmLdpEntityCreateNhrLdb | read-create | current | When set to 'true', LDP Path Manager creates joins to the NHR stub and Label Manager as part of activation. This field cannot be changed when the row is active. |
| 1.3.6.1.4.1.629.10.15.1.2.1.27 | ColumndccrldpPmLdpEntityCreatePsiJoin | read-create | current | When set to 'true', LDP Path Manager creates a PSI join to an instance of DC-TPM as part of activation. This field cannot be changed when the row is active. |
| 1.3.6.1.4.1.629.10.15.1.2.1.28 | ColumndccrldpPmRedundancySwitchIntvl | read-create | current | The time interval that DC-MPLS will use in pseudowire redundancy when attempting a switchover, before it determines that switchover has failed. |
| 1.3.6.1.4.1.629.10.15.1.2.1.29 | ColumndccrldpPmLabelWithdrawDelay | read-create | current | The time interval during which Label Withdraws will not be sent upstream after an event occurs that would otherwise cause Label Withdraws to be sent. The only … |
| 1.3.6.1.4.1.629.10.15.1.2.1.30 | ColumndccrldpPmImplicitXcVcFecs | read-create | current | Whether to use implicit XCs for VC FECs. This feature is deprecated. Implicit XCs are required for ECMP FECs, and are enabled automatically if support for them… |
| 1.3.6.1.4.1.629.10.15.1.2.1.31 | ColumndccrldpPmWthdrwDownstreamLbl | read-create | current | DC-LDP sends label mappings to all upstream peers. Sometimes, due to a change of next hop from IP Routing or a new address from the peer, a peer may change fro… |
| 1.3.6.1.4.1.629.10.15.1.2.1.32 | ColumndccrldpPmIngressReleaseDelay | read-create | current | Whether to use the dccrldpPmLabelWithdrawDelay timer to also prevent immediate switch deprogramming at ingress. |
| 1.3.6.1.4.1.629.10.15.1.2.1.33 | ColumndccrldpPmPwFastUpstreamRelease | read-create | current | Whether to release upstream programmed PW state immediately when DC-LDP sends a Label Withdraw, instead of waiting for a Label Release / session-down event. |
| 1.3.6.1.4.1.629.10.15.2 | NodedccrldpConformance | |||
| 1.3.6.1.4.1.629.10.15.2.1 | NodedccrldpCompliances | |||
| 1.3.6.1.4.1.629.10.15.2.1.1 | CompliancedccrldpMibCompliance | current | The compliance statement for the DC-TEMIB product. | |
| 1.3.6.1.4.1.629.10.15.2.2 | NodedccrldpGroups | |||
| 1.3.6.1.4.1.629.10.15.2.2.2 | GroupdccrldpMandatoryGroup | current | Mandatory Objects. | |
| 1.3.6.1.4.1.629.10.15.2.2.3 | GroupdccrldpOptionalGroup | current | Optional Objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcCrldpAdminStatus | INTEGER { up(1), down(2) } | current | The value determines the desired administrative status of a DC-CR-LDP table entry. The up and down states indicate that the traffic flow is enabled or disabled respectively for the protocol. |
| DcCrldpIndex | Unsigned32 | current | A general purpose SNMP index into the dcHafEntity table. |
| DcCrldpOperStatus | INTEGER { up(1), down(2), goingUp(3), goingDown(4), actFailed(5) } | current | The value determines the operational status of a DC-CR-LDP table entry. The up and down states indicate that the traffic flow is enabled or disabled respectively. |