DC-EVPN-MIB
261 objects
DC-EVPN Management Interface.
Imported Objects
| DC-MASTER-TC | -- End Versa change MjStatus AdminStatus BaseOperStatus NumericIndex OperStatus SjStatus VrfName |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-TC-STD-MIB | MplsLabel |
| Q-BRIDGE-MIB | -- Begin Versa change - Defined VlanId here as Q-BRIDGE-MIB depends on too many MIBs -- VlanId -- |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.1 | IdentityevpnMib | DC-EVPN Management Interface. | ||
| 1.1.1 | NodeevpnObjects | |||
| 1.1.1.1 | TableevpnEntTable | not-accessible | current | This is the top-level table for DC-EVPN. It controls creation and global configuration of DC-EVPN. |
| 1.1.1.1.1 | RowevpnEntEntry | not-accessible | current | Each entry represents a DC-EVPN entity. |
| 1.1.1.1.1.1 | ColumnevpnEntEntityIndex | not-accessible | current | Identifies a DC-EVPN entity. |
| 1.1.1.1.1.2 | ColumnevpnEntRowStatus | read-create | current | The row status for this DC-EVPN Entity Table entry, used to create and destroy table entries. |
| 1.1.1.1.1.3 | ColumnevpnEntAdminStatus | read-create | current | The administrative status of this DC-EVPN entity, used to activate and deactivate DC-EVPN. |
| 1.1.1.1.1.4 | ColumnevpnEntOperStatus | read-only | current | The current operational status of this DC-EVPN entity. |
| 1.1.1.1.1.5 | ColumnevpnEntNbasePriority | read-create | current | N-BASE priority for this DC-EVPN Manager entity. When multiple N-BASE processes have IPSs queued, then the supplied N-BASE scheduler prioritizes them according… |
| 1.1.1.1.1.6 | ColumnevpnEntTimerGranularity | read-create | current | Clustered timer granularity for this DC-EVPN Manager entity. Increasing this value reduces the accuracy of clustered timers, but might reduce the number of OS … |
| 1.1.1.1.1.7 | ColumnevpnEntRestartDuration | read-create | current | The length of the audit period for the BDPI join after the entity activates. After a restart, bridge domain information is kept programmed until the end of the… |
| 1.1.1.1.1.8 | ColumnevpnEntRescheduleLimit | read-create | current | The maximum number of different objects that can be processed in a single schedule. When subcomponents are scheduled by receipt of an IPS or a timer pop, that … |
| 1.1.1.1.1.9 | ColumnevpnEntLdbiBufferPoolSize | read-create | current | The size of the LDBI buffer pool. This determines the maximum number of buffers that can exist at once for the LDBI pool. DC-EVPN Manager does not use pre-allo… |
| 1.1.1.1.1.10 | ColumnevpnEntRpiBufferPoolSize | read-create | current | The size of the RPI buffer pool. This determines the maximum number of buffers that can exist at once for the RPI pool. DC-EVPN Manager does not use pre-alloca… |
| 1.1.1.1.1.11 | ColumnevpnEntBdpiBufferPoolSize | read-create | current | The size of the BDPI buffer pool. This determines the maximum number of buffers that can exist at once for the BDPI pool. DC-EVPN Manager does not use pre-allo… |
| 1.1.1.1.1.12 | ColumnevpnEntMaiBufferPoolSize | read-create | current | The size of the MAI buffer pool. This determines the maximum number of buffers that can exist at once for the MAI pool. DC-EVPN Manager does not use pre-alloca… |
| 1.1.1.1.1.13 | ColumnevpnEntRetryInterval | read-create | current | The retry interval for resource failures that are retried on a timer. This field is not suitable for network administrators. This field cannot be changed after… |
| 1.1.1.1.1.14 | ColumnevpnEntMacMoveLimit | read-create | current | The limit on the number of MAC mobility events for a given MAC address before a duplicate MAC error is detected. When DC-EVPN Manager detects a MAC mobility ev… |
| 1.1.1.1.1.15 | ColumnevpnEntMacMoveDuration | read-create | current | The duration of the timer to start when a MAC mobility event is detected via local learning. See evpnEntMacMoveLimit for a description of how this timer is use… |
| 1.1.1.1.1.16 | ColumnevpnEntTpiBufferPoolSize | read-create | current | The size of the TPI buffer pool. This determines the maximum number of buffers that can exist at once for the TPI pool. DC-EVPN Manager does not use pre-alloca… |
| 1.1.1.1.1.17 | ColumnevpnEntLocalRouterAddressType | read-create | current | The type of the local router address to advertise in EVPN routes, or 'unknown' if there is no associated IP address. |
| 1.1.1.1.1.18 | ColumnevpnEntLocalRouterAddress | read-create | current | The local router address that is used as the BGP next hop address for routes, and as the originating router address in the NLRI of inclusive multicast EVPN rou… |
| 1.1.1.1.1.19 | ColumnevpnEntMacWithdrawDelay | read-create | current | The time between DC-EVPN receiving a withdrawal for a MAC and deleting the dataplane programming for that MAC address. This allows DC-EVPN to maintain connecti… |
| 1.1.1.1.1.20 | ColumnevpnEntLabelAllocType | read-create | current | The type of label allocation to use for EVPN/MPLS. Note that the value used typically depends on data plane support, so this field is expected to be determined… |
| 1.1.1.1.1.21 | ColumnevpnEntPriBufferPoolSize | read-create | current | The size of the PRI buffer pool. This determines the maximum number of buffers that can exist at once for the PRI pool. DC-EVPN Manager does not use pre-alloca… |
| 1.1.1.1.1.22 | ColumnevpnEntUseHal | read-create | current | Indicates whether DC-EVPN is being used in a system integrated with DC-PSM and other HAL components. When set to 'true', DC-EVPN will use the PRI join instead … |
| 1.1.1.1.1.23 | ColumnevpnEntAfmBufferPoolSize | read-create | current | The size of the AFM buffer pool. This determines the maximum number of buffers that can exist at once for the AFM pool. DC-EVPN Manager does not use pre-alloca… |
| 1.1.1.1.1.24 | ColumnevpnEntBdiiBufferPoolSize | read-create | current | The size of the BDII buffer pool. This determines the maximum number of buffers that can exist at once for the BDII pool. DC-EVPN Manager does not use pre-allo… |
| 1.1.1.1.1.25 | ColumnevpnEntPartialRt | read-create | current | Indicates whether EVPN will allow partial route target matching against auto-derived route targets. Enabling this allows auto-derived route targets to be used … |
| 1.1.1.1.1.26 | ColumnevpnEntTenantId | read-write | current | This value describes org id. |
| 1.1.1.1.1.27 | ColumnevpnEntRtiName | read-create | current | This value describes routing instance name. This value is passed, while configuring the routing instance. |
| 1.1.1.1.1.28 | ColumnevpnEntEnableAlarms | read-write | current | This field is used to enable alarms. |
| 1.1.1.1.1.29 | ColumnevpnEntVxlanAddrType | read-create | current | The address type of the evpnEntVxlanAddr. This field can only be changed when the Admin Status is down. |
| 1.1.1.1.1.30 | ColumnevpnEntVxlanAddr | read-create | current | The TVI P2MP Router Address that is used for creating, ptvi dynamic tunnel interface. This address must be either of type IPv4 or IPv6, as specified by the evp… |
| 1.1.1.2 | TableevpnMjTable | not-accessible | current | This table controls which entities DC-EVPN should join to as master. Each join is represented by a row in this table. The status of each join is represented by… |
| 1.1.1.2.1 | RowevpnMjEntry | not-accessible | current | Represents a join for which DC-EVPN is master. |
| 1.1.1.2.1.2 | ColumnevpnMjInterfaceId | not-accessible | current | Identifies the interface required of this master join. |
| 1.1.1.2.1.3 | ColumnevpnMjPartnerType | not-accessible | current | Identifies the type of slave entity to join to. This can be used to distinguish between different entity types both of who can provide the same interface. |
| 1.1.1.2.1.4 | ColumnevpnMjPartnerIndex | not-accessible | current | Identifies the specific slave entity to join with. |
| 1.1.1.2.1.5 | ColumnevpnMjSubIndex | not-accessible | current | Additional indexing information for the join. For RPI joins to DC-RTM, this is set to the IP address family to be used on the join (AMB_INETWK_ADDR_TYPE_IPV4 o… |
| 1.1.1.2.1.6 | ColumnevpnMjRowStatus | read-create | current | The row status for this DC-EVPN Master Join Table entry, used to create and destroy table entries. |
| 1.1.1.2.1.7 | ColumnevpnMjAdminStatus | read-create | current | The administrative status of this master join, used to start and stop the join. |
| 1.1.1.2.1.8 | ColumnevpnMjOperStatus | read-only | current | The current operational status of this master join. |
| 1.1.1.2.1.9 | ColumnevpnMjJoinStatus | read-only | current | The status of the master join. |
| 1.1.1.3 | TableevpnSjTable | not-accessible | current | Read-only table containing information on joins for which DC-EVPN entities are acting as slaves. Each row in this table represents one slave join in a particul… |
| 1.1.1.3.1 | RowevpnSjEntry | not-accessible | current | Represents a join for which DC-EVPN is slave. |
| 1.1.1.3.1.2 | ColumnevpnSjInterfaceId | not-accessible | current | Identifies the interface provided by this slave join. |
| 1.1.1.3.1.3 | ColumnevpnSjPartnerType | not-accessible | current | Identifies the type of master entity joined to. |
| 1.1.1.3.1.4 | ColumnevpnSjPartnerIndex | not-accessible | current | Identifies the specific master entity joined to. |
| 1.1.1.3.1.5 | ColumnevpnSjSubIndex | not-accessible | current | Permits multiple joins between the same pair of entities. |
| 1.1.1.3.1.6 | ColumnevpnSjJoinStatus | read-only | current | The status of the slave join. |
| 1.1.1.4 | TableevpnEviTable | not-accessible | current | Read-create table configuring EVPN instances. |
| 1.1.1.4.1 | RowevpnEviEntry | not-accessible | current | Entry in the table of EVPN instances. |
| 1.1.1.4.1.2 | ColumnevpnEviIndex | not-accessible | current | Index identifying the EVPN instance. |
| 1.1.1.4.1.3 | ColumnevpnEviRowStatus | read-create | current | Row status. Used to create and delete the configuration for this EVPN instance. |
| 1.1.1.4.1.4 | ColumnevpnEviAdminStatus | read-create | current | The desired status of the EVPN instance. Used to enable or disable the EVPN instance. |
| 1.1.1.4.1.5 | ColumnevpnEviOperStatus | read-only | current | Operational status of the EVPN instance. |
| 1.1.1.4.1.6 | ColumnevpnEviOperReason | read-only | current | The reason for the EVPN instance to be in its current oper status, if the instance is not active or activating. |
| 1.1.1.4.1.7 | ColumnevpnEviRdCfgOrAuto | read-create | current | Specifies whether this EVPN instance uses a configured or auto-derived route distiguisher. |
| 1.1.1.4.1.8 | ColumnevpnEviCfgRd | read-create | current | Specifies the configured route distinguisher for the EVPN instance. This is only used if evpnEviRdCfgOrAuto is set to 'configured'. |
| 1.1.1.4.1.9 | ColumnevpnEviRd | read-only | current | The route distinguisher in use for this EVPN instance. This is set as follows. - Set to the value of evpnEviCfgRd if evpnEviRdCfgOrAuto is 'configured'. - Auto… |
| 1.1.1.4.1.10 | ColumnevpnEviRtCfgOrAuto | read-create | current | Specifies whether this EVPN instance uses configured or auto-derived route targets. Currently, only auto-derived route targets are supported, so the value must… |
| 1.1.1.4.1.11 | ColumnevpnEviAutoRt | read-only | current | The auto-derived route target for this EVPN instance. Set to all zeros if EVPN does not have the information required to derive the value. |
| 1.1.1.4.1.12 | ColumnevpnEviEncapsulation | read-create | current | Specifies the encapsulation type supported by the EVPN instance. |
| 1.1.1.4.1.13 | ColumnevpnEviLocalRouterAddressType | read-create | current | The type of the local router address to advertise in EVPN routes for this EVPN instance, or 'unknown' if there is no associated IP address. |
| 1.1.1.4.1.14 | ColumnevpnEviLocalRouterAddress | read-create | current | The local router address that is used as the BGP next hop address for routes, and as the originating router address in the NLRI of inclusive multicast EVPN rou… |
| 1.1.1.4.1.15 | ColumnevpnEviAutoRtType | read-create | current | Specifies the type of the auto-derived route target for this EVPN instance. If you do not wish to use auto-derived route targets, set this field to 'none'. |
| 1.1.1.4.1.16 | ColumnevpnEviServiceType | read-create | current | Specifies the service type of EVI |
| 1.1.1.5 | TableevpnBdTable | not-accessible | current | Read-create table providing configuration of an EVPN bridge domain. |
| 1.1.1.5.1 | RowevpnBdEntry | not-accessible | current | Entry in the table of EVPN bridge domains. |
| 1.1.1.5.1.2 | ColumnevpnBdIndex | not-accessible | current | Index identifying the BD. |
| 1.1.1.5.1.3 | ColumnevpnBdRowStatus | read-create | current | Row status. Used to create and delete the configuration for this bridge domain. |
| 1.1.1.5.1.4 | ColumnevpnBdAdminStatus | read-create | current | The desired status of the bridge domain. Used to enable or disable the bridge domain. |
| 1.1.1.5.1.5 | ColumnevpnBdOperStatus | read-only | current | Operational status of the bridge domain. |
| 1.1.1.5.1.6 | ColumnevpnBdOperReason | read-only | current | The reason for the bridge domain to be in its current oper status, if it is not active or activating. |
| 1.1.1.5.1.7 | ColumnevpnBdMacLearning | read-create | current | This object specifies if MAC Learning is enabled for this bridge domain. If this object is true then MAC learning is enabled. If false, then MAC learning is di… |
| 1.1.1.5.1.8 | ColumnevpnBdMacAddrLimit | read-create | current | The maximum number of learned entries allowed in the bridge domain's FDB. A value of zero means no maximum. |
| 1.1.1.5.1.9 | ColumnevpnBdMacAgingTime | read-create | current | The MAC aging time to use for this bridge domain, in seconds. This field is only significant if mac-learning is enabled. A value of 0 means that MAC aging is d… |
| 1.1.1.5.1.10 | ColumnevpnBdVni | read-create | current | The VXLAN Network Identifier for the Bridge Domain. This must be non-zero for bridge domains associated with an EVI using VXLAN encapsulation. |
| 1.1.1.5.1.11 | ColumnevpnBdMcastMode | read-create | current | Multicast mode used by this bridge-domain. |
| 1.1.1.5.1.12 | ColumnevpnBdMcastGpAddressType | read-create | current | The type of IP multicast group address to be used for BUM traffic for a VXLAN Bridge Domain. The address is required if evpnBdMcastMode is 'pimAsm' or 'pimBidi… |
| 1.1.1.5.1.13 | ColumnevpnBdMcastGpAddress | read-create | current | The IP multicast group address to be used for BUM traffic for a VXLAN Bridge Domain. The address is required if evpnBdMcastMode is 'pimAsm' or 'pimBidir'. |
| 1.1.1.5.1.14 | ColumnevpnBdEviIndex | not-accessible | current | EVI Index corresponding to the BD. |
| 1.1.1.5.1.15 | ColumnevpnBdVlanId | not-accessible | current | VLAN id corresponding to the BD. |
| 1.1.1.6 | TableevpnIfBindCfgTable | not-accessible | current | Read-create table for configuring interfaces as attachment circuits in an EVPN bridge domain. The bridge domain itself is configured in the evpnBdTable. Note t… |
| 1.1.1.6.1 | RowevpnIfBindCfgEntry | not-accessible | current | Entry describing an interface in an EVPN bridge domain. |
| 1.1.1.6.1.4 | ColumnevpnIfBindCfgRowStatus | read-create | current | Row status. Used to create and delete entries in the table. |
| 1.1.1.6.1.5 | ColumnevpnIfBindCfgAdminStatus | read-create | current | The administrative status of this configuration. Used to activate and deactivate the programming of this interface in the specified EVPN bridge domain. |
| 1.1.1.6.1.6 | ColumnevpnIfBindCfgOperStatus | read-only | current | The current operational status of the programming of the interface in the specified EVPN bridge domain. |
| 1.1.1.6.1.7 | ColumnevpnIfBindCfgOperReason | read-only | current | The reason for the programming of the interface in the specified bridge domain to be in its current oper status, if it is not active or activating. |
| 1.1.1.6.1.8 | ColumnevpnIfBindCfgMacLearning | read-create | current | This object specifies if MAC Learning is enabled for this bridge domain member. If this object is true then MAC learning is enabled. If false, then MAC learnin… |
| 1.1.1.6.1.9 | ColumnevpnIfBindCfgMacAddrLimit | read-create | current | The maximum number of learned entries allowed in the bridge domain's FDB for this interface. A value of zero means no maximum. |
| 1.1.1.7 | TableevpnBdIfTable | not-accessible | current | Read-only table listing the interfaces configured as attachment circuits in EVPN bridge domains. |
| 1.1.1.7.1 | RowevpnBdIfEntry | not-accessible | current | Entry describing an interface in an EVPN bridge domain. |
| 1.1.1.7.1.4 | ColumnevpnBdIfOperStatus | read-only | current | The current operational status of the programming of the interface in the specified EVPN bridge domain. |
| 1.1.1.7.1.5 | ColumnevpnBdIfOperReason | read-only | current | The reason for the interface to be in its current oper status, if it is not active or activating. |
| 1.1.1.8 | TableevpnMacIpTable | not-accessible | current | Read-only table for displaying MAC addresses belonging to EVPN instances. This includes MAC addresses learned from locally attached customer sites and MAC addr… |
| 1.1.1.8.1 | RowevpnMacIpEntry | not-accessible | current | A MAC address associated with an EVPN instance. |
| 1.1.1.8.1.3 | ColumnevpnMacIpEthernetTagId | not-accessible | current | The Ethernet tag ID associated with the MAC address. |
| 1.1.1.8.1.4 | ColumnevpnMacIpMacAddress | not-accessible | current | The MAC address in the EVPN FDB. |
| 1.1.1.8.1.5 | ColumnevpnMacIpIpAddressType | not-accessible | current | Type of IP address associated with the MAC address, or 'unknown' if there is no associated IP address. |
| 1.1.1.8.1.6 | ColumnevpnMacIpIpAddress | not-accessible | current | IP address associated with the MAC address, if any. |
| 1.1.1.8.1.7 | ColumnevpnMacIpPathIndex | not-accessible | current | Arbitrary index, used to distinguish multiple paths associated with a single MAC/IP entry. |
| 1.1.1.8.1.8 | ColumnevpnMacIpSource | read-only | current | Source from which the MAC address was learned. |
| 1.1.1.8.1.9 | ColumnevpnMacIpBgpNhAddrType | read-only | current | Type of IP address associated with the BGP next hop for the MAC address. Set to 'unknown' for MAC addresses learned from local customer sites. |
| 1.1.1.8.1.10 | ColumnevpnMacIpBgpNhAddr | read-only | current | The BGP next hop for the MAC address. This returns a zero length string for MAC addresses learned from local customer sites. |
| 1.1.1.8.1.11 | ColumnevpnMacIpLocalInterface | read-only | current | The local interface index through which the MAC address can be reached, or zero for a MAC addresses learned through BGP. |
| 1.1.1.8.1.12 | ColumnevpnMacIpLabel | read-only | current | The label associated with this MAC address. |
| 1.1.1.8.1.13 | ColumnevpnMacIpInUse | read-only | current | Indicates whether the MAC/IP entry is in use for forwarding. For MAC/IP advertisements from remote EVPN instances, this indicates whether the entry has been ac… |
| 1.1.1.8.1.14 | ColumnevpnMacIpEsi | read-only | current | The Ethernet Segment Identifier advertised with the MAC/IP address. |
| 1.1.1.8.1.15 | ColumnevpnMacIpSequenceNum | read-only | current | The MAC Mobility sequence number associated with the MAC/IP address. |
| 1.1.1.8.1.16 | ColumnevpnMacIpSticky | read-only | current | Whether the Sticky flag is set for this MAC/IP address. |
| 1.1.1.9 | TableevpnEsTable | not-accessible | current | Read-write table providing configuration parameters for Ethernet Segments. This table is only relevant for multi-homing. |
| 1.1.1.9.1 | RowevpnEsEntry | not-accessible | current | Configuration for an Ethernet Segment. |
| 1.1.1.9.1.2 | ColumnevpnEsIfIndex | not-accessible | current | Interface index of the Ethernet Segment. Note that this is the interface index of the physical interface or bundle interface for the link to the multi-homed CE… |
| 1.1.1.9.1.3 | ColumnevpnEsRowStatus | read-create | current | Row status. Used to create and delete the configuration for this Ethernet Segment. |
| 1.1.1.9.1.4 | ColumnevpnEsAdminStatus | read-create | current | The desired status of the Ethernet Segment configuration. |
| 1.1.1.9.1.5 | ColumnevpnEsOperStatus | read-only | current | Operational status of the Ethernet Segment configuration. A value of 'up' indicates only that the configuration is enabled and consistent. The status of the Et… |
| 1.1.1.9.1.6 | ColumnevpnEsOperReason | read-only | current | The reason for the Ethernet Segment to be in its current oper status, if the instance is not active or activating. |
| 1.1.1.9.1.7 | ColumnevpnEsIdentifier | read-create | current | Configured Ethernet Segment Identifier (ESI), or all zeros if no Ethernet Segment Identifier is configured. For an ES multi-homed using MC-LAG, EVPN can auto-g… |
| 1.1.1.9.1.8 | ColumnevpnEsMode | read-create | current | Type of multi-homing for the Ethernet Segment. - A value of singleHomed forces EVPN to treat this Ethernet Segment as single homed. - A value of EVPN performs … |
| 1.1.1.9.1.9 | ColumnevpnEsRouteDistinguisher | read-create | current | The configured route distinguisher to use when advertising the Ethernet Segment route. This can be used to over-ride the default value, which is based on the B… |
| 1.1.1.9.1.10 | ColumnevpnEsRouteTarget | read-create | current | The ES-Import Route Target for the Ethernet Segment. For an ES that is multi-homed using MC-LAG or that is configured to use a type 1 ESI, EVPN can auto-genera… |
| 1.1.1.9.1.11 | ColumnevpnEsDfElectionWaitTime | read-create | current | Time to wait after advertising the Ethernet Segment before running the designated forwarder election. |
| 1.1.1.9.1.12 | ColumnevpnEsTnnlEndptAddrType | read-create | current | Type of tunnel endpoint address to advertise in EVPN routes for this ES, or 'unknown' if there is no associated IP address. |
| 1.1.1.9.1.13 | ColumnevpnEsTnnlEndptAddr | read-create | current | Tunnel endpoint address to use in EVPN routes for this ES. Specify a value if you need remote PEs to send unicast traffic destined for this Ethernet Segment us… |
| 1.1.1.10 | TableevpnEsStateTable | not-accessible | current | Read-only Ethernet Segment status table. An entry exists for each interface that has been configured or auto-discovered as an Ethernet Segment. |
| 1.1.1.10.1 | RowevpnEsStateEntry | not-accessible | current | Status of an Ethernet Segment. |
| 1.1.1.10.1.3 | ColumnevpnEsStateStatus | read-only | current | Status of the Ethernet Segment configuration. A value of 'up' indicates that the Ethernet Segment configuration is being used in EVPN route advertisements. |
| 1.1.1.10.1.4 | ColumnevpnEsStateIfStatus | read-only | current | Status of the interface. A value of 'up' indicates that the interface is active and capable of forwarding data. |
| 1.1.1.10.1.5 | ColumnevpnEsStateIdentifier | read-only | current | The Ethernet Segment Identifier (ESI) associated with this Ethernet Segment. |
| 1.1.1.10.1.6 | ColumnevpnEsStateMode | read-only | current | Indicates which multi-homing procedures, if any, are in operation on the Ethernet Segment. |
| 1.1.1.10.1.7 | ColumnevpnEsStateRouteDistinguisher | read-only | current | The route distinguisher in use for advertising the Ethernet Segment route. If no value is configured for evpnEsRouteDistinguisher, the value is auto-generated … |
| 1.1.1.10.1.8 | ColumnevpnEsStateRouteTarget | read-only | current | The ES-Import Route Target for the Ethernet Segment. |
| 1.1.1.10.1.9 | ColumnevpnEsStateDfElectionWaitTime | read-only | current | Time to wait after advertising the Ethernet Segment before running the designated forwarder election. |
| 1.1.1.10.1.10 | ColumnevpnEsStateTnnlEndptAddrType | read-only | current | Type of tunnel endpoint address to advertise in EVPN routes for this ES, or 'unknown' if there is no associated IP address. |
| 1.1.1.10.1.11 | ColumnevpnEsStateTnnlEndptAddr | read-only | current | Tunnel endpoint address to use in EVPN routes for this ES. This matches the configured value in evpnEsTnnlEndptAddr if an address is configured, and is otherwi… |
| 1.1.1.11 | TableevpnEsMemberTable | not-accessible | current | Read-only table listing the IP address of each PE connected to Ethernet Segment. |
| 1.1.1.11.1 | RowevpnEsMemberEntry | not-accessible | current | A member of an Ethernet Segment. |
| 1.1.1.11.1.3 | ColumnevpnEsMemberAddrType | not-accessible | current | IP address type of a PE connected to an Ethernet Segment. |
| 1.1.1.11.1.4 | ColumnevpnEsMemberAddr | not-accessible | current | IP address of a PE connected to an Ethernet Segment. |
| 1.1.1.11.1.5 | ColumnevpnEsMemberIsLocal | read-only | current | Indicates whether the IP address belongs to the local router. |
| 1.1.1.12 | TableevpnEsDfTable | not-accessible | current | Read-only table identifying the designated forwarder for each supported VLAN on an Ethernet Segment. |
| 1.1.1.12.1 | RowevpnEsDfEntry | not-accessible | current | The designated forwarder for a VLAN on an Ethernet Segment. |
| 1.1.1.12.1.3 | ColumnevpnEsDfVlan | not-accessible | current | VLAN identifier of a service on the Ethernet Segment, or 0 for untagged traffic. |
| 1.1.1.12.1.4 | ColumnevpnEsDfAddrType | read-only | current | IP address type of the designated forwarder. |
| 1.1.1.12.1.5 | ColumnevpnEsDfAddr | read-only | current | The IP address of the designated forwarder for the VLAN on this Ethernet Segment. |
| 1.1.1.13 | TableevpnIrbTable | not-accessible | current | Read-only table listing the IRBs advertised to DC-EVPN. |
| 1.1.1.13.1 | RowevpnIrbEntry | not-accessible | current | An IRB interface advertised to DC-EVPN. |
| 1.1.1.13.1.2 | ColumnevpnIrbIfIndex | not-accessible | current | Interface index of the IRB interface. |
| 1.1.1.13.1.3 | ColumnevpnIrbName | read-only | current | The name of the IRB interface. |
| 1.1.1.13.1.4 | ColumnevpnIrbEvi | read-only | current | The EVPN instance index that the IRB is associated with. |
| 1.1.1.13.1.5 | ColumnevpnIrbVrfName | read-only | current | The text name of the VRF that this IRB is associated with. |
| 1.1.1.14 | TableevpnEviRtTable | not-accessible | current | Read-write table for configuring per-EVI route targets. |
| 1.1.1.14.1 | RowevpnEviRtEntry | not-accessible | current | Configuration for a per-EVI route target. |
| 1.1.1.14.1.3 | ColumnevpnEviRtRouteTarget | not-accessible | current | The configured route target value. |
| 1.1.1.14.1.4 | ColumnevpnEviRtRowStatus | read-create | current | Row status. Used to create and delete the configuration for this route target. |
| 1.1.1.14.1.5 | ColumnevpnEviRtOperStatus | read-only | current | Operational status of the route target configuration. |
| 1.1.1.14.1.6 | ColumnevpnEviRtOperReason | read-only | current | The reason for the route target to be in its current oper status. |
| 1.1.1.14.1.7 | ColumnevpnEviRtType | read-create | current | Type of route target. - import(1) indicates that the EVI should import all remote routes that carry this route target, but should not add this route target to … |
| 1.1.1.15 | TableevpnIpVrfTable | not-accessible | current | Read-write table for configuring IP-VRFs for EVPN. |
| 1.1.1.15.1 | RowevpnIpVrfEntry | not-accessible | current | Configuration for an IP-VRF. |
| 1.1.1.15.1.2 | ColumnevpnIpVrfName | not-accessible | current | The text name of the IP-VRF. |
| 1.1.1.15.1.3 | ColumnevpnIpVrfRowStatus | read-create | current | Row status. Used to create and delete the configuration for this IP-VRF. |
| 1.1.1.15.1.4 | ColumnevpnIpVrfAdminStatus | read-create | current | The desired status of the IP-VRF configuration. |
| 1.1.1.15.1.5 | ColumnevpnIpVrfOperStatus | read-only | current | Operational status of the IP-VRF configuration. |
| 1.1.1.15.1.6 | ColumnevpnIpVrfOperReason | read-only | current | The reason for the IP-VRF configuration to be in its current oper status. |
| 1.1.1.15.1.7 | ColumnevpnIpVrfVni | read-create | current | The VXLAN Network Identifier for the IP-VRF. |
| 1.1.1.15.1.8 | ColumnevpnIpVrfRouteDistinguisher | read-create | current | The configured route distinguisher to use when advertising IP Prefix routes for this VRF. This can be used to over-ride the default value, which is based on th… |
| 1.1.1.16 | TableevpnIpVrfRtTable | not-accessible | current | Read-write table for configuring per-VRF route targets. |
| 1.1.1.16.1 | RowevpnIpVrfRtEntry | not-accessible | current | Configuration for a per-VRF route target. |
| 1.1.1.16.1.2 | ColumnevpnIpVrfRtVrfName | not-accessible | current | The text name of the VRF that this RT is associated with. |
| 1.1.1.16.1.3 | ColumnevpnIpVrfRtTarget | not-accessible | current | The Route Target for the IP-VRF. This field is used in conjunction with evpnIpVrfRtType to configure the route target for the IP-VRF. |
| 1.1.1.16.1.4 | ColumnevpnIpVrfRtType | read-create | current | Type of route target for the IP-VRF. This route target will be used to import routes to or export routes from the IP-VRF's RIB. - import(1) indicates that the … |
| 1.1.1.16.1.5 | ColumnevpnIpVrfRtRowStatus | read-create | current | Row status. Used to create and delete the configuration for this route target. |
| 1.1.1.16.1.6 | ColumnevpnIpVrfRtOperStatus | read-only | current | Operational status of the route target configuration. |
| 1.1.1.16.1.7 | ColumnevpnIpVrfRtOperReason | read-only | current | The reason for the route target to be in its current oper status. |
| 1.1.1.17 | TableevpnIncMcastTable | not-accessible | current | Read-only table for displaying inclusive multicast routes associated with EVPN instances. This includes routes sent by the local router and routes received fro… |
| 1.1.1.17.1 | RowevpnIncMcastEntry | not-accessible | current | An inclusive multicast route associated with an EVPN instance. |
| 1.1.1.17.1.3 | ColumnevpnIncMcastRd | not-accessible | current | The Route Distinguisher from the route. |
| 1.1.1.17.1.4 | ColumnevpnIncMcastEthernetTagId | not-accessible | current | The Ethernet tag ID associated with the route. |
| 1.1.1.17.1.5 | ColumnevpnIncMcastIpAddressType | not-accessible | current | The originating router's IP address type. |
| 1.1.1.17.1.6 | ColumnevpnIncMcastIpAddress | not-accessible | current | The originating router's IP address. |
| 1.1.1.17.1.7 | ColumnevpnIncMcastSource | read-only | current | Source from which the route was learned. |
| 1.1.1.17.1.8 | ColumnevpnIncMcastTnnlType | read-only | current | Tunnel type as contained in the PMSI attribute associated with the route. |
| 1.1.1.17.1.9 | ColumnevpnIncMcastTnnlLabel | read-only | current | The label associated with this tunnel. |
| 1.1.1.17.1.10 | ColumnevpnIncMcastTnnlIpAddrType | read-only | current | Tunnel endpoint IP address type. |
| 1.1.1.17.1.11 | ColumnevpnIncMcastTnnlIpAddr | read-only | current | Tunnel endpoint IP address, taken from the PMSI attribute associated with the route. - For a tunnel type of ingressReplication, this is the IP address to which… |
| 1.1.1.18 | TableevpnVxlanTnnlTable | not-accessible | current | Read-only table for displaying VXLAN tunnels used by EVPN instances. |
| 1.1.1.18.1 | RowevpnVxlanTnnlEntry | not-accessible | current | A VXLAN tunnel used by EVPN instance. |
| 1.1.1.18.1.2 | ColumnevpnVxlanTnnlLocalVni | not-accessible | current | The local VNI associated with the VXLAN tunnel. |
| 1.1.1.18.1.3 | ColumnevpnVxlanTnnlRemoteVni | not-accessible | current | The remote VNI associated with the VXLAN tunnel. |
| 1.1.1.18.1.4 | ColumnevpnVxlanTnnlPeerAddressType | not-accessible | current | The destination IP address type of the VXLAN tunnel. |
| 1.1.1.18.1.5 | ColumnevpnVxlanTnnlPeerAddress | not-accessible | current | The destination IP address of the VXLAN tunnel. |
| 1.1.1.18.1.6 | ColumnevpnVxlanTnnlSourceAddressType | not-accessible | current | The source IP address type of the VXLAN tunnel. |
| 1.1.1.18.1.7 | ColumnevpnVxlanTnnlSourceAddress | not-accessible | current | The source IP address of the VXLAN tunnel. |
| 1.1.1.18.1.8 | ColumnevpnVxlanTnnlOperStatus | read-only | current | Operational status of the VXLAN tunnel used by EVPN. |
| 1.1.1.18.1.9 | ColumnevpnVxlanTnnlPortIfIndex | read-only | current | Interface index of the VXLAN port. |
| 1.1.1.18.1.10 | ColumnevpnVxlanTnnlEviIndex | read-only | current | Index identifying the EVPN instance. |
| 1.1.1.18.1.11 | ColumnevpnVxlanTnnlVrfName | read-only | current | The text name of the VRF that this VXLAN Tunnel is associated with. |
| 1.1.2 | NodeevpnNotifications | |||
| 1.1.2.0 | NodeevpnBaseNotifications | |||
| 1.1.2.0.1 | NotificationevpnMacError | current | Notification indicating that an error has been detected for a MAC address advertised within an EVPN network. Notifications are generated when the fault is init… | |
| 1.1.2.0.2 | NotificationevpnMulticastConfigError | current | Notification indicating inconsistent multicast configuration. The notification is generated when EVPN detects that the local multicast configuration for an EVI… | |
| 1.1.2.0.3 | NotificationevpnIpDuplicationError | current | Notification indicating that a duplicated IP has been detected within an EVPN network. Notifications are generated when the fault is initially detected, and wh… | |
| 1.1.3 | NodeevpnConformance | |||
| 1.1.3.1 | NodeevpnGroups | |||
| 1.1.3.1.1 | GroupevpnGeneralGroup | current | Objects from EVPN entity configuration tables. | |
| 1.1.3.1.2 | GroupevpnConfigGroup | current | Objects from EVPN protocol configuration tables. | |
| 1.1.3.1.3 | GroupevpnInfoGroup | current | Information from read-only EVPN tables. | |
| 1.1.3.1.4 | GroupevpnNotificationObjectGroup | current | Objects used in notification parameters. | |
| 1.1.3.1.5 | GroupevpnNotificationGroup | current | Notifications. | |
| 1.1.3.2 | NodeevpnCompliances | |||
| 1.1.3.2.1 | ComplianceevpnModuleFullCompliance | current | The full set of EVPN objects. | |
| 1.1.4 | NodeevpnNotification | |||
| 1.1.4.1 | NodeevpnNotificationEntry | |||
| 1.1.4.1.2 | ScalarevpnMacErrorMacAddress | accessible-for-notify | current | The MAC address for which a fault has been detected. |
| 1.1.4.1.3 | ScalarevpnMacErrorErrorType | accessible-for-notify | current | The MAC address for which a fault has been detected. |
| 1.1.4.1.4 | ScalarevpnMacErrorErrorDetected | accessible-for-notify | current | Indicates whether or not an error is currently detected for this MAC address. A value of true(1) indicates that an error has been detected for this MAC address… |
| 1.1.4.1.5 | ScalarevpnMacErrorIpAddressType | accessible-for-notify | current | If evpnMacErrorErrorDetected is true, this field is the type of IP address in the remote MAC/IP route that caused the error. |
| 1.1.4.1.6 | ScalarevpnMacErrorIpAddress | accessible-for-notify | current | If evpnMacErrorErrorDetected is true, this field is the IP address in the remote MAC/IP route that caused the error. |
| 1.1.4.1.7 | ScalarevpnMacErrorIpBgpNhAddrType | accessible-for-notify | current | If evpnMacErrorErrorDetected is true, this field is the type of IP address associated with the BGP next hop for the remote MAC/IP route that caused the error. |
| 1.1.4.1.8 | ScalarevpnMacErrorIpBgpNhAddr | accessible-for-notify | current | If evpnMacErrorErrorDetected is true, this field is the BGP next hop address for the remote MAC/IP route that caused the error. |
| 1.1.4.1.9 | ScalarevpnLocalMcastMode | accessible-for-notify | current | The local multicast mode. |
| 1.1.4.1.10 | ScalarevpnLocalMcastGpAddrType | accessible-for-notify | current | The local IP multicast group address type. |
| 1.1.4.1.11 | ScalarevpnLocalMcastGpAddr | accessible-for-notify | current | The local IP multicast group address. |
| 1.1.4.1.12 | ScalarevpnRemoteRtrAddrType | accessible-for-notify | current | The type of address of a remote router. |
| 1.1.4.1.13 | ScalarevpnRemoteRtrAddr | accessible-for-notify | current | The address of a remote router. |
| 1.1.4.1.14 | ScalarevpnRemoteMcastMode | accessible-for-notify | current | The remote multicast mode. |
| 1.1.4.1.15 | ScalarevpnRemoteMcastGpAddrType | accessible-for-notify | current | The remote IP multicast group address type. |
| 1.1.4.1.16 | ScalarevpnRemoteMcastGpAddr | accessible-for-notify | current | The remote IP multicast group address. |
| 1.1.4.1.17 | ScalarevpnIpDupErrorIpType | accessible-for-notify | current | The type of the IP address for which an error has been detected. |
| 1.1.4.1.18 | ScalarevpnIpDupErrorIpAddr | accessible-for-notify | current | The IP address for which and error has been detected. |
| 1.1.4.1.19 | ScalarevpnIpDupErrorDetected | accessible-for-notify | current | Indicates whether or not an error is currently detected for this IP address. A value of true(1) indicates that an error has been detected for this IP address. … |
| 1.1.4.1.20 | ScalarevpnIpDupErrorMacAddress | accessible-for-notify | current | The remote MAC address where the same IP is configured. |
| 1.1.4.1.21 | ScalarevpnIpDupIpBgpNhAddrType | accessible-for-notify | current | The type of IP address associated with the BGP next hop for the remote MAC/IP route that caused the error. |
| 1.1.4.1.22 | ScalarevpnIpDupIpBgpNhAddr | accessible-for-notify | current | The BGP next hop address for the remote MAC/IP route that caused the error. |
| 1.1.4.1.23 | ScalarevpnEviName | accessible-for-notify | current | Configured name of the EVI |
| 1.1.4.1.24 | ScalarevpnBdName | accessible-for-notify | current | Configured name of the bridge-domain |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EvpnCfgOrAuto | INTEGER { none(1), configured(2), auto(3) } | current | Indicates whether a value is expected to be configured or automatically derived by EVPN. |
| EvpnEncapsulation | INTEGER { mpls(1), vxlan(2) } | current | The encapsulation type supported by an EVI. |
| EvpnESI | OCTET STRING (SIZE (10)) | current | Syntax for an Ethernet Segment Identifier. |
| EvpnEsModeTc | INTEGER { singleHomed(1), allActive(2), singleActive(3) } | current | Operational mode for an Ethernet Segment. Only single-homing and all-active multi-homing modes are supported. |
| EvpnEthernetTag | Unsigned32 | current | An Ethernet tag identifier, representing a broadcast domain in an EVPN instance. |
| EvpnIndex | Unsigned32 (1..65535) | current | The index of an EVPN instance. The range is restricted to a two octet value to allow auto-derivation of route targets and route distinguishers. |
| EvpnIndexOrZero | Unsigned32 (0..65535) | current | An index of an EVPN instance, or zero if no index has been configured. |
| EvpnLabelAllocType | INTEGER { perFdb(1), perMac(2) } | current | Options for the label allocation strategy for EVPN/MPLS. |
| EvpnLocalMcastMode | INTEGER { ingressReplication(1), pimAsm(2), pimBidir(3) } | current | Locally configured multicast mode. |
| EvpnMacErrorType | INTEGER { duplicate(1), stickMac(2) } | current | Type of error being reported or cleared in a evpnMacError notification. |
| EvpnMjIfId | INTEGER { ifAtgPri(226492416), ifAtgLdb(545325056), ifAtgI3(696844288), ifAtgTpi(697892864), ifAtgQcrp(1031864320), ifAtgBdpi(2038431744), ifAtgMai(2038759424) } | current | The type of interface to which a DC-EVPN join applies. |
| EvpnOperReason | INTEGER { none(1), entityNotUp(2), adminConfig(3), resourceFailure(4), noIfInfo(5), eviNotUp(6), evpnBdNotUp(7), noRouteDistinguisher(8), routeDistinguisherClash(9), noEsi(10), badVni(11), vniClash(12), vlanSubIfEviClash(13), noBgpId(14), rtTypeClash(15), noRouteTarget(16), evpnIpVrfNotUp(17), evpnNoSystemMac(18), rtClash(19), evpnNoMcastGroup(20), evpnNoSourceIp(21), evpnBadTnnlDestType(22), vlanIdClash(23) } | current | A reason for the current oper status of an EVPN object. |
| EvpnPmsiTnnlType | INTEGER { ingressReplication(1), pimAsm(2), pimBidir(3), pimSsm(4), other(5) } | current | The tunnel type for forwarding BUM traffic for a bridge domain. |
| EvpnRouteDistinguisher | OCTET STRING (SIZE (8)) | current | Syntax for a route distinguisher. |
| EvpnRouteTarget | OCTET STRING (SIZE (8)) | current | Syntax for a route target. |
| EvpnRtUsageTc | INTEGER { import(1), export(2), importExport(3), none(4) } | current | Indicates whether a route target is used for route import, export or both. |
| EvpnServiceType | INTEGER { vlanAwareBundle(1), vlanBased(2) } | current | Service type |
| EvpnSjIfId | INTEGER { ifAtgQcrp(1031864320), ifAtgBdii(2038497280) } | current | The type of interface to which a join applies. |
| EvpnSource | INTEGER { local(1), remote(2) } | current | The source of an EVPN route. - 'local' indicates that the EVPN route was created based on information from locally attached sites. - 'remote' indicates that the EVPN route was received from a remote EVPN instance. |
| EvpnStatusType | INTEGER { up(1), down(2) } | current | Status values for an Ethernet Segment or interface in an Ethernet Segment. |
| EvpnVniOrZero | Unsigned32 (0..16777215) | current | A VXLAN network identifer (VNI) value, or zero if no VNI is specified. |
| VlanId | Integer32 (1..4094) | current | The VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification. |