DC-ISIS-MIB
450 objects
The MIB module for management of the DC-ISIS product. This is closely based on the draft standard MIB draft-ietf-isis-wg-mib-16.
Imported Objects
| DC-MASTER-TC | AuthUserDataString EntityIndexOrZero IfOperStatus IgpShortcutMetricType NumericIndex |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv4 InetAddressIPv6 InetAddressPrefixLength InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.10 | IdentitydcIsisMib | The MIB module for management of the DC-ISIS product. This is closely based on the draft standard MIB draft-ietf-isis-wg-mib-16. | ||
| 1.3.6.1.4.1.629.10.10.1 | NodeisisObjects | |||
| 1.3.6.1.4.1.629.10.10.1.1 | NodeisisSystem | |||
| 1.3.6.1.4.1.629.10.10.1.1.1 | TableisisSysTable | not-accessible | current | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1 | RowisisSysEntry | not-accessible | current | Each row defines information specific to a single instance of the IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.1 | ColumnisisSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.2 | ColumnisisSysVersion | read-only | current | The version number of the IS-IS protocol that is implemented. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.3 | ColumnisisSysType | read-create | current | At which levels is the Intermediate System running? This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.4 | ColumnisisSysID | read-create | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivati… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.5 | ColumnisisSysMaxPathSplits | read-create | current | Maximum number of paths with equal routing metric value which it is permitted to split between. Note that, when IGP shortcut interfaces are in use, this maximu… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.6 | ColumnisisSysMaxLSPGenInt | read-create | current | Maximum interval, in seconds, between generated LSPs by this instance of the protocol. This object follows the resettingTimer behavior. The value must be great… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.7 | ColumnisisSysPollESHelloRate | read-create | current | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.8 | ColumnisisSysWaitTime | read-create | current | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.9 | ColumnisisSysAdminState | read-create | current | The administrative state of this instance of the Integrated IS-IS protocol. Setting this object to the value 'on' when its current value is 'off' enables opera… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.10 | ColumnisisSysL2toL1Leaking | read-create | current | If true, allow the router to leak L2 routes into L1. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.11 | ColumnisisSysMaxAge | read-create | current | Value to place in RemainingLifeTime field of the LSPs we generate. This should be at least 300 seconds greater than isisSysMaxLSPGenInt. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.12 | ColumnisisSysReceiveLSPBufferSize | read-create | current | Size of the largest Buffer we are designed or configured to store. This should be at least as big as the maximum isisSysOrigLSPBuffSize supported by the system… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.13 | ColumnisisSysExistState | read-create | current | The state of the IS-IS router. Turning this to state 'destroy' forces the router to forget all the current configuration. Setting the state to 'notInService' s… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.14 | ColumnisisSysOperStatus | read-only | current | The current operational status of this instance of the Protocol Manager component of DC-ISIS. Note that DC-ISIS can only activate if there is at least one acti… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.15 | ColumnisisSysAllowAutoI3Config | read-create | current | If 'true' then add IP addresses received from the I3 stub to the isisCircIPAddrTable with admin state 'on'. If 'false' then add them with admin state 'off'. Th… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.16 | ColumnisisSysCalcMaxDelay | read-create | current | The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of … |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.17 | ColumnisisSysCalcThrshUpdStart | read-create | current | This parameter can be used to override the routing calculation delay indicated by the isisSysCalcMaxDelay parameter when the number of updates to the Link Stat… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.18 | ColumnisisSysCalcThrshUpdRestart | read-create | current | This parameter can be used to interrupt a full routing calculation when the number of pending updates to the Link State Database has reached a threshold value.… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.19 | ColumnisisSysCalcThrshRestartLimit | read-create | current | This parameter limits the number of consecutive times a routing calculation can be interrupted by new updates. This guarantees that the routing calculation wil… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.20 | ColumnisisSysCalcPauseFreq | read-create | current | This value determines how regularly a Routing Calculation is paused. It is measured in points. The points scale roughly maps to a time scale, so that the large… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.21 | ColumnisisSysCheckChecksums | read-create | current | This value determines how often the checksums of LSPs in the Link State Database are checked. If 0, no checksums in the database are checked. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.22 | ColumnisisSysZeroAgeLifetime | read-create | current | This is the minimum amount of time in seconds for which the header of an expired LSP shall be retained after it has been flooded with zero Remaining Lifetime. … |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.23 | ColumnisisSysNumUpdPending | read-only | current | The number of updates that are pending addition to the Link State Database. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.24 | ColumnisisSysNumUpdMerged | read-only | current | The number of updates that have been merged into the Link State Database since the last routing calculation. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.25 | ColumnisisSysNumCksumsPending | read-only | current | The number of LSPs in the Link State Database which are now due to have their checksum checked. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.26 | ColumnisisSysTEMetricPcntge | read-create | current | The Traffic Engineering metric is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter determines t… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.27 | ColumnisisSysMaxBwidthPcntge | read-create | current | The maximum bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter deter… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.28 | ColumnisisSysMaxResBwidthPcntge | read-create | current | The maximum reservable bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this para… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.29 | ColumnisisSysUnresBwidthPcntge | read-create | current | The unreserved bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter de… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.30 | ColumnisisSysMaxLSPBwidthPcntge | read-create | current | The maximum LSP bandwidth for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performance and re… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.31 | ColumnisisSysMinLSPBwidthPcntge | read-create | current | The minimum LSP bandwidth for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performance and re… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.32 | ColumnisisSysMTUSizePcntge | read-create | current | The Maximum Transmission Unit size for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performan… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.33 | ColumnisisSysTERouterID | read-create | current | The Local IPv4 TE Router ID. This is a single stable IPv4 address that can always be referenced in a path that will be reachable from multiple hops away, regar… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.34 | ColumnisisSysIPv6TERouterID | read-create | current | The Local IPv6 TE Router ID. This is a single stable IPv6 global address that can always be referenced in a path that will be reachable from multiple hops away… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.35 | ColumnisisSysMaxExternalRoutes | read-create | current | The maximum number of static routes and routes redistributed from other protocols that DC-ISIS will accept. The action that DC-ISIS will take when the maximum … |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.36 | ColumnisisSysMaxExternalRoutesAction | read-create | current | The action that DC-ISIS will take when the number of external routes exceeds isisSysMaxExternalRoutes. If set to 'log', DC-ISIS will alert the administrator by… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.37 | ColumnisisSysLspFullSuppress | read-create | current | The set of routes (if any) that will be removed from the local LSP by DC-ISIS when the local LSP becomes full at either level. When set to 'external', all stat… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.38 | ColumnisisSysLspFullSetDBOL | read-create | current | If set to 'true', DC-ISIS will set the database overload flag in the local LSP (at all active levels) when the local LSP becomes full (at either level). The ad… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.39 | ColumnisisSysRestartHelpPeer | read-create | current | Indicates whether DC-ISIS implements the procedures defined in the IS-IS restart RFC (3847) for helping a peer to restart. Note that this object has no effect … |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.40 | ColumnisisSysRestartActivationType | read-create | current | This object is only used when DC-ISIS is manually activated or deactivated (in other words, enters or leaves the state with row status 'active' and admin statu… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.41 | ColumnisisSysRestartAutoResetType | read-create | current | There are cases where the IS-IS protocol requires the local node to automatically deactivate and later reactivate. This object indicates which restart procedur… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.42 | ColumnisisSysRestartAdjacencyWait | read-create | current | This object is only used when DC-ISIS activates with the activation type (isisSysRestartActivationType or isisSysRestartAutoResetType) set to 'start' or 'resta… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.43 | ColumnisisSysMaxRecoveryTime | read-create | current | This object is only used when DC-ISIS activates with the activation type (isisSysRestartActivationType or isisSysRestartAutoResetType) set to 'restart'. It def… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.44 | ColumnisisSysClearStats | read-create | current | Set to 'true' to clear all system statistics, including the isisSystemCounter and isisPacketCounter tables. Note that isisSysStatsLSPCount is not reset by this… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.45 | ColumnisisSysSetAttached | read-create | current | If DC-ISIS is operating at both level 1 and level 2, this field indicates how DC-ISIS should decide whether to set the attached bit in its level 1 LSP. - 'atta… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.46 | ColumnisisSysProtSupported | read-create | current | This attribute contains the set of protocols supported by this Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.47 | ColumnisisSysRestrictLanAdjsToSubnet | read-create | current | This object only affects IPv4 broadcast circuits. If this is set to 'true', DC-ISIS will only form adjacencies with intermediate systems that are on the same s… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.48 | ColumnisisSysHostName | read-create | current | The string that this instance of IS-IS will use as the local hostname. This is advertised to other Intermediate Systems in the Dynamic Hostname TLV. |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.49 | ColumnisisSysCalcSoonAfterCircChange | read-create | current | Set this object to 'true' to minimize the delay before triggering a routing calculation that includes any relevant circuit change. This means a change to the l… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.50 | ColumnisisSysSendNotifications | read-create | current | This attribute contains the set of notifications generated by this Intermediate System. The notifications that may be enabled are the isisCircIndTable, isisDat… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.51 | ColumnisisSysEnableIgpShortcut | read-create | current | Set isisSysEnableIgpShortcut to 'true' to enable IS-IS routing over IGP shortcut interfaces. Set isisSysEnableIgpShortcut to 'false' to disable IS-IS routing o… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.52 | ColumnisisSysI3EntityIndex | read-create | current | Identifies the I3 stub instance to which this IS-IS instance should join. The status of the join is given by the row in the isisPmMjTable with isisPmMjInterfac… |
| 1.3.6.1.4.1.629.10.10.1.1.1.1.53 | ColumnisisSysRtmPurgeTime | read-create | current | This object defines the maximum time that DC-ISIS will wait when a Routing Table Manager (such as DC-RTM) fails before purging routes. In some systems, the Rou… |
| 1.3.6.1.4.1.629.10.10.1.1.2 | TableisisManAreaAddrTable | not-accessible | current | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.1.2.1 | RowisisManAreaAddrEntry | not-accessible | current | Each entry contains one area address manually configured on this system |
| 1.3.6.1.4.1.629.10.10.1.1.2.1.1 | ColumnisisManAreaAddr | not-accessible | current | A manually configured area address for this system. This object follows the index behavior. Note: an index for the entry {1, {49.0001} active} in this table wo… |
| 1.3.6.1.4.1.629.10.10.1.1.2.1.2 | ColumnisisManAreaAddrExistState | read-create | current | The state of the isisManAreaAddrEntry. This object follows the Row Status behavior. If the isisSysAdminState for this instance of the IS-IS protocol is 'on', a… |
| 1.3.6.1.4.1.629.10.10.1.1.3 | TableisisAreaAddrTable | not-accessible | current | The union of the sets of area addresses reported in all Level 1 LSPs with segment number zero received by this instance of the protocol from Intermediate Syste… |
| 1.3.6.1.4.1.629.10.10.1.1.3.1 | RowisisAreaAddrEntry | not-accessible | current | Each entry contains one area address reported in a Level 1 LSP received by this instance of the IS-IS protocol. The DC-ISIS implementation ignores received are… |
| 1.3.6.1.4.1.629.10.10.1.1.3.1.1 | ColumnisisAreaAddr | not-accessible | current | An area address reported in a Level 1 LSP received by this instance of the IS-IS protocol. The DC-ISIS implementation ignores received area addresses with a le… |
| 1.3.6.1.4.1.629.10.10.1.1.3.1.2 | ColumnisisAreaAddrInLSP | read-only | current | Following ISO10589 section 7.1.5, we advertise the three numerically lowest level 1 area addresses in the level 2 LSP fragment zero. If 'true', then this area … |
| 1.3.6.1.4.1.629.10.10.1.1.5 | TableisisSummAddrTable | not-accessible | current | The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine an… |
| 1.3.6.1.4.1.629.10.10.1.1.5.1 | RowisisSummAddrEntry | not-accessible | current | Each entry contains one IP summary address. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.1 | ColumnisisSummAddressType | not-accessible | current | The Type of IP address for this summary address. This object follows the index behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.2 | ColumnisisSummAddress | not-accessible | current | The IP Address value for this summary address. This object follows the index behavior. The address must not contain any set host bits (bits set after the addre… |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.3 | ColumnisisSummAddrPrefixLen | not-accessible | current | The Length of the IP NetMask for this summary address. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.4 | ColumnisisSummAddrExistState | read-create | current | The existence state of this summary address. This object follows the row status behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.5 | ColumnisisSummAddrMetric | read-create | current | The metric value to announce this summary address with in LSPs generated by this system. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.6 | ColumnisisSummAddrFullMetric | read-create | current | The wide metric value to announce this summary address with in LSPs generated by this system. |
| 1.3.6.1.4.1.629.10.10.1.1.5.1.8 | ColumnisisSummAddrMtId | not-accessible | current | The topology that this summary address applies to. This should be set to zero if multi-topology IS-IS is not enabled. This object follows the index behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.6 | TableisisRedistributeAddrTable | not-accessible | current | This table provides criteria to decide if a route should be leaked from L2 to L1 when Domain Wide Prefix leaking is enabled. Addresses that match the summary m… |
| 1.3.6.1.4.1.629.10.10.1.1.6.1 | RowisisRedistributeAddrEntry | not-accessible | current | Each entry contains one IP summary address to manage leaking L2 addresses into L1. |
| 1.3.6.1.4.1.629.10.10.1.1.6.1.1 | ColumnisisRedistributeAddrType | not-accessible | current | The Type of IP address for this summary address. This object follows the index behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.6.1.2 | ColumnisisRedistributeAddrAddress | not-accessible | current | The IP Address value for this summary address. This object follows the index behavior. The address must not contain any set host bits (bits set after the addre… |
| 1.3.6.1.4.1.629.10.10.1.1.6.1.3 | ColumnisisRedistributeAddrPrefixLen | not-accessible | current | The Length of the IP NetMask for this summary address. |
| 1.3.6.1.4.1.629.10.10.1.1.6.1.4 | ColumnisisRedistributeAddrExistState | read-create | current | The existence state of this summary address. This object follows the row status behavior. |
| 1.3.6.1.4.1.629.10.10.1.1.6.1.6 | ColumnisisRedistributeAddrMtId | not-accessible | current | The topology that this redistribution address applies to. This should be set to zero if multi-topology IS-IS is not enabled. This object follows the index beha… |
| 1.3.6.1.4.1.629.10.10.1.1.7 | TableisisRouterTable | not-accessible | current | The set of hostnames and router ID. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1 | RowisisRouterEntry | not-accessible | current | Each entry tracks information about one peer at one level. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1.1 | ColumnisisRouterSysID | not-accessible | current | The System ID of the Router Peer. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1.2 | ColumnisisRouterLevel | not-accessible | current | The level of this Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1.3 | ColumnisisRouterHostName | read-only | current | The hostname listed in LSP, or NULL if none. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1.4 | ColumnisisRouterID | read-only | current | The Router ID of the Peer found in LSP, or NULL if none. |
| 1.3.6.1.4.1.629.10.10.1.1.7.1.5 | ColumnisisRouterIPv6ID | read-only | current | The IPv6 TE Router ID found in the LSP, if any. |
| 1.3.6.1.4.1.629.10.10.1.1.8 | TableisisMtSysTable | not-accessible | current | A row in this table represents the level of support for a topology on this instance of the Integrated IS-IS protocol. This table is only used when multi-topolo… |
| 1.3.6.1.4.1.629.10.10.1.1.8.1 | RowisisMtSysEntry | not-accessible | current | Each row defines information specific to a single topology on a single instance of the IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.2 | ColumnisisMtSysMtId | not-accessible | current | The topology that this row represents. |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.3 | ColumnisisMtSysExistState | read-create | current | The state of the MIB row. Turning this to state 'destroy' forces the router to forget all the current topology configuration. Setting the state to 'notInServic… |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.4 | ColumnisisMtSysAdminState | read-create | current | The desired operational state of this topology on this instance of the Integrated IS-IS protocol. Setting this object to the value 'on' when its current value … |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.5 | ColumnisisMtSysOperState | read-only | current | The current operational status of this topology on this instance of the Integrated IS-IS protocol. If this is 'down' then the topology is not supported. |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.6 | ColumnisisMtSysProtSupported | read-create | current | This attribute contains the set of protocols supported by this topology on this Intermediate System. Note that RFC 5120 assigns certain topologies to serve pre… |
| 1.3.6.1.4.1.629.10.10.1.1.8.1.7 | ColumnisisMtSysDefaultActive | read-create | current | When set to 'true', corresponding rows in the isisMtCircStatusTable have oper status 'up', unless a corresponding row exists in the isisMtCircManConfigTable. W… |
| 1.3.6.1.4.1.629.10.10.1.2 | NodeisisSysLevel | |||
| 1.3.6.1.4.1.629.10.10.1.2.1 | TableisisSysLevelTable | not-accessible | current | Level specific information about an instance of IS-IS. |
| 1.3.6.1.4.1.629.10.10.1.2.1.1 | RowisisSysLevelEntry | not-accessible | current | Describe variables defined for Area or Domain. |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.1 | ColumnisisSysLevelIndex | not-accessible | current | The level that this entry describes. |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.2 | ColumnisisSysLevelOrigLSPBuffSize | read-create | current | The maximum size of LSPs and SNPs originated by this Intermediate System at this level. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.3 | ColumnisisSysLevelMinLSPGenInt | read-create | current | Minimum interval, in milliseconds, between successive generation of LSPs with the same LSPID at this level by this instance of the protocol. This object follow… |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.4 | ColumnisisSysLevelOverloadState | read-only | current | The Overload state of the database at this level. The value 'overloaded' indicates a database that is low on an essential resource, such as memory. The adminis… |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.5 | ColumnisisSysLevelSetOverload | read-create | current | Administratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this var… |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.6 | ColumnisisSysLevelSetOverloadUntil | read-create | current | If set, the overload bit should be set, and cleared after sysUpTime exceeds this value. |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.7 | ColumnisisSysLevelMetricStyle | read-create | current | Which style of Metric do we generate in our LSPs at this level? |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.8 | ColumnisisSysLevelSPFConsiders | read-create | current | Which style of Metric do we consider in our SPF computation at this level? |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.9 | ColumnisisSysLevelTEEnabled | read-create | current | Do we do Traffic Engineering for IPv4 at this level? If Traffic Engineering is enabled, isisSysLevelMetricStyle must be set to 'wide' or 'both' for this level,… |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.10 | ColumnisisSysLevelIPv6TEEnabled | read-create | current | Do we do Traffic Engineering for IPv6 at this level? DC-ISIS only supports Traffic Engineering for IPv6 at level 1. If Traffic Engineering is enabled, a value … |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.11 | ColumnisisSysLevelRestartT2Duration | read-create | current | This object is only used when DC-ISIS activates with the activation type (isisSysRestartActivationType or isisSysRestartAutoResetType) set to 'start' or 'resta… |
| 1.3.6.1.4.1.629.10.10.1.2.1.1.12 | ColumnisisSysLevelAuthUser | read-create | current | Authentication user data for area/domain level authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to … |
| 1.3.6.1.4.1.629.10.10.1.3 | NodeisisCirc | |||
| 1.3.6.1.4.1.629.10.10.1.3.2 | TableisisCircTable | not-accessible | current | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1 | RowisisCircEntry | not-accessible | current | An isisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.1 | ColumnisisCircIndex | not-accessible | current | The identifier of this circuit, unique within the instance of the IS-IS protocol. This object follows the index behavior. This is for SNMP Indexing purposes on… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.2 | ColumnisisCircIfIndex | read-create | current | The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation. In DC-ISIS this is also used as the 3-… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.3 | ColumnisisCircIfSubIndex | read-create | current | A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation. … |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.4 | ColumnisisCircAdminState | read-create | current | The administrative state of the circuit. This object follows the AdminState behavior. In DC-ISIS the default admin state for a new automatic circuit is 'on' if… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.5 | ColumnisisCircExistState | read-create | current | The existence state of this circuit. This object follows the Row Status behavior. Setting the state to 'notInService' halts the generation and processing of IS… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.6 | ColumnisisCircType | read-create | current | The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface define… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.7 | ColumnisisCircExtDomain | read-create | current | If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.8 | ColumnisisCircLevel | read-create | current | Indicates which type of packets will be sent and accepted on this circuit. The values used will be modified by the settings of isisSysType. This object follows… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.9 | ColumnisisCircPassiveCircuit | read-create | current | Should we include this interface in LSPs, even if it is not running the IS-IS Protocol? In DC-ISIS, circuits with isisCircExtDomain 'true' will only be include… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.10 | ColumnisisCircMeshGroupEnabled | read-create | current | Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh gro… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.11 | ColumnisisCircMeshGroup | read-create | current | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the sa… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.12 | ColumnisisCircSmallHellos | read-create | current | Can we send unpadded hellos on LAN circuits? False means LAN Hellos must be padded. Implementations should allow the administrator to read this value. An imple… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.13 | ColumnisisCircLastUpTime | read-only | current | If the circuit is enabled, the value of sysUpTime when isisCircAdminState most recently entered the state on. If the circuit is not on, the value of sysUpTime … |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.14 | ColumnisisCirc3WayEnabled | read-only | current | Is this circuit enabled to run 3Way handshake? DC-ISIS will always run the 3-way handshake on point to point circuits, and so this object is read-only. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.15 | ColumnisisCircExtendedCircID | read-only | current | The value to be used as the extended circuit ID in 3Way handshake. This value is only used if isisCirc3WayEnabled is true, and must be unique across all circui… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.16 | ColumnisisCircOperState | read-only | current | The operational state of this circuit. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.17 | ColumnisisCircSdEntityIndex | read-create | current | Identifies the SDC entity which will handle this circuit. This object must be specified before the circuit can run the IS-IS protocol. It cannot be changed aft… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.18 | ColumnisisCircDlBuffPoolSize | read-create | current | Capacity of the buffer pool used by the DL stub to send data signals to the SDC. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.19 | ColumnisisCircSdPDUBuffPoolSize | read-create | current | Capacity of the buffer pool into which SDC transfers data signals from the DL Stub. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.20 | ColumnisisCircSdIndBuffPoolSize | read-create | current | Capacity of the buffer pool used by SDC to send indications to PM. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.21 | ColumnisisCircDataLinkBlockSize | read-create | current | Maximum size of PDU that can be sent or received over this circuit (MTU). This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.22 | ColumnisisCircPhysicalAddress | read-create | current | The physical address of the network interface (for example a MAC address on an Ethernet card). This value is only relevant to a broadcast circuit and is ignore… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.23 | ColumnisisCircManualOrAutomatic | read-only | current | Has this circuit been configured by MIB (manual), I3 information (automatic) or both? MIB configuration overrides I3 configuration. Automatic circuits cannot b… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.24 | ColumnisisCircT1TimerRunning | read-only | current | Is the T1 timer running on this circuit? This object is only valid on a circuit that is currently running the IS-IS protocol (isisCircExtDomain is 'false' and … |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.25 | ColumnisisCircProtSupported | read-create | current | Which protocols are supported on this circuit? Note that the configured value is used in conjunction with the value of isisSysProtSupported. In particular: - I… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.26 | ColumnisisCircPtToPtOverLAN | read-create | current | Allows a broadcast circuit to be configured to operate point-to-point over LAN procedures. This is used in conjunction with the isisCircType object as follows.… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.28 | ColumnisisCircProtBfdDesired | read-create | current | Indicates the protocols running on this circuit for which Bidirectional Forwarding Detection (BFD) is desired. If isisCircProtBfdDesired is clear for an addres… |
| 1.3.6.1.4.1.629.10.10.1.3.2.1.29 | ColumnisisCircIfName | read-write | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.629.10.10.1.3.3 | TableisisCircIPAddrTable | not-accessible | current | This table contains the set of IP Addresses configured on all circuits. |
| 1.3.6.1.4.1.629.10.10.1.3.3.1 | RowisisCircIPAddrEntry | not-accessible | current | Each entry contains one IP Address configured on a circuit. |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.1 | ColumnisisCircIPAddrManOrAuto | not-accessible | current | The type of IP address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of interface informati… |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.2 | ColumnisisCircIPAddrIndex | not-accessible | current | An index to this table which identifies the IP addresss to which this entry belongs. This object follows the manualOrAutomatic behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.3 | ColumnisisCircIPAddrRowStatus | read-create | current | The existence state of this IP address. This object follows the RowStatus and manualOrAutomatic behaviors. |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.4 | ColumnisisCircIPAddrAdminState | read-create | current | Administrative state of this IP address. This object follows the AdminState and manualOrAutomatic behaviors. The system level isisSysAllowAutoI3Config field de… |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.5 | ColumnisisCircIPAddrAddressType | read-create | current | The Inet type of this IP Address. This object follows the manualOrAutomatic behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.6 | ColumnisisCircIPAddrAddress | read-create | current | One IP Address configured on this circuit. This field must be present on row creation and cannot be modified after creation. This address must be unique among … |
| 1.3.6.1.4.1.629.10.10.1.3.3.1.7 | ColumnisisCircIPAddrInLSP | read-create | current | Is this IP address advertised in TLV 132 in LSPs sent out by this intermediate system? This object follows the manualOrAutomatic behavior. |
| 1.3.6.1.4.1.629.10.10.1.3.4 | TableisisMtCircManConfigTable | not-accessible | current | A row in this table represents the manual configuration of support for a topology on this circuit. Rows in this table are created and destroyed by an administr… |
| 1.3.6.1.4.1.629.10.10.1.3.4.1 | RowisisMtCircManConfigEntry | not-accessible | current | An isisMtCircManConfigEntry is created to provide multi-topology specifc circuit configuration. |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.3 | ColumnisisMtCircManMtId | not-accessible | current | The topology that this row represents. |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.4 | ColumnisisMtCircManExistState | read-create | current | The state of the MIB row. Turning this to state 'destroy' forces the router to forget the manually configured multi-topology configuration for this circuit. Se… |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.5 | ColumnisisMtCircManAdminState | read-create | current | The desired operational state for the manual configuration of this topology on this circuit. Setting this object to the value 'on' when its current value is 'o… |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.6 | ColumnisisMtCircManOperState | read-only | current | The current operational status of the manual configuration for this topology on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.7 | ColumnisisMtCircManL1WideMetric | read-create | current | The level 1 wide metric value of this circuit for this topology. Note that topologies other than MT ID 0 always use wide metrics. For multi-topology ID zero (t… |
| 1.3.6.1.4.1.629.10.10.1.3.4.1.8 | ColumnisisMtCircManL2WideMetric | read-create | current | The level 2 wide metric value of this circuit for this topology. Note that topologies other than MT ID 0 always use wide metrics. For multi-topology ID zero (t… |
| 1.3.6.1.4.1.629.10.10.1.3.5 | TableisisMtCircStatusTable | not-accessible | current | A row in this table represents the current support for a topology on this circuit. A row exists in this table for every row in the isisCircTable and every row … |
| 1.3.6.1.4.1.629.10.10.1.3.5.1 | RowisisMtCircStatusEntry | not-accessible | current | An isisMtCircStatusEntry details the status of a topology on a circuit. |
| 1.3.6.1.4.1.629.10.10.1.3.5.1.3 | ColumnisisMtCircStatusMtId | not-accessible | current | The topology that this row represents. |
| 1.3.6.1.4.1.629.10.10.1.3.5.1.4 | ColumnisisMtCircStatusOperState | read-only | current | The current operational state of this topology on this circuit. If no corresponding row exists in the isisMtCircManConfigTable then this is derived from the is… |
| 1.3.6.1.4.1.629.10.10.1.3.5.1.5 | ColumnisisMtCircStatusL1WideMetric | read-only | current | The level 1 wide metric value of this circuit for this topology. Note that topologies other than MT ID 0 always use wide metrics. If no corresponding row exist… |
| 1.3.6.1.4.1.629.10.10.1.3.5.1.6 | ColumnisisMtCircStatusL2WideMetric | read-only | current | The level 2 wide metric value of this circuit for this topology. Note that topologies other than MT ID 0 always use wide metrics. If no corresponding row exist… |
| 1.3.6.1.4.1.629.10.10.1.4 | NodeisisCircLevelValues | |||
| 1.3.6.1.4.1.629.10.10.1.4.1 | TableisisCircLevelTable | not-accessible | current | Level specific information about circuits used by IS-IS. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1 | RowisisCircLevelEntry | not-accessible | current | An isisCircLevelEntry exists for each level on each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.1 | ColumnisisCircLevelIndex | not-accessible | current | The level that this entry describes. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.2 | ColumnisisCircLevelMetric | read-create | current | The metric value of this circuit for this level. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.3 | ColumnisisCircLevelWideMetric | read-create | current | The wide metric value of this circuit for this level. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.4 | ColumnisisCircLevelISPriority | read-create | current | The priority for becoming LAN Designated Intermediate System at this level. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.5 | ColumnisisCircLevelIDOctet | read-only | current | A one byte identifier for the circuit selected by the Intermediate System. On point-to-point circuits, the value is used as the Local Circuit ID in point-to-po… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.6 | ColumnisisCircLevelID | read-only | current | On a point to point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initializat… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.7 | ColumnisisCircLevelDesIS | read-only | current | The ID of the LAN Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Int… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.8 | ColumnisisCircLevelHelloMultiplier | read-create | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.9 | ColumnisisCircLevelHelloTimer | read-create | current | Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at L1 is used as the period between Hellos on L1L2 … |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.10 | ColumnisisCircLevelDRHelloTimer | read-create | current | Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer … |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.11 | ColumnisisCircLevelLSPThrottle | read-create | current | Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.12 | ColumnisisCircLevelMinLSPRetransInt | read-create | current | Minimum interval, in milliseconds, between re-transmission of an LSP at this level. This object follows the resettingTimer behavior. Note that isisCircLevelLSP… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.13 | ColumnisisCircLevelCSNPInterval | read-create | current | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this … |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.14 | ColumnisisCircLevelPartSNPInterval | read-create | current | Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.15 | ColumnisisCircLevelStickyDIS | read-create | current | Boost to add to the priority of this router (up to the maximum permitted value) when it becomes DIS at this level to make it more likely to remain DIS. |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.16 | ColumnisisCircLevelAuthUser | read-create | current | Authentication user data for this level's authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to assis… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.17 | ColumnisisCircLevelIDHostname | read-only | current | The hostname corresponding to the system ID part of the isisCircLevelID object. This is the null string if the isisCircLevelID object is null, or if no hostnam… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.18 | ColumnisisCircLevelDesISHostname | read-only | current | The hostname corresponding to the system ID part of the isisCircLevelDesIS object. This is the null string if the isisCircLevelDesIS object is null, or if no h… |
| 1.3.6.1.4.1.629.10.10.1.4.1.1.19 | ColumnisisCircLevelMinLSPArrivalInt | read-create | current | The minimum interval between reception of new instances of a particular LSP. LSP instances received at higher frequencies are discarded. If set to zero then no… |
| 1.3.6.1.4.1.629.10.10.1.5 | NodeisisCounters | |||
| 1.3.6.1.4.1.629.10.10.1.5.1 | TableisisSystemCounterTable | not-accessible | current | System wide counters for one instance of the IS-IS protocol on the system. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1 | RowisisSystemCounterEntry | not-accessible | current | System-wide IS-IS counters. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.1 | ColumnisisSysStatLevel | not-accessible | current | The level that this entry describes. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.2 | ColumnisisSysStatCorrLSPs | read-only | current | Number of corrupted in-memory LSPs detected. LSPs received from the wire with a bad checksum are silently dropped and not counted. LSPs received from the wire … |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.3 | ColumnisisSysStatAuthTypeFails | read-only | current | The number of authentication type mismatches recognized by this instance of the protocol. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.4 | ColumnisisSysStatAuthFails | read-only | current | The number of authentication failures recognized by this instance of the protocol. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.5 | ColumnisisSysStatLSPDbaseOloads | read-only | current | Number of times the LSP database has become overloaded. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.6 | ColumnisisSysStatManAddrDropFromAreas | read-only | current | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.7 | ColumnisisSysStatAttmptToExMaxSeqNums | read-only | current | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.8 | ColumnisisSysStatSeqNumSkips | read-only | current | Number of times a sequence number skip has occurred. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.9 | ColumnisisSysStatOwnLSPPurges | read-only | current | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.10 | ColumnisisSysStatIDFieldLenMismatches | read-only | current | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.11 | ColumnisisSysStatPartChanges | read-only | current | Partition changes. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.12 | ColumnisisSysStatSPFRuns | read-only | current | Number of times we ran SPF at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.13 | ColumnisisSysStatLSPError | read-only | current | The count of badly formed LSPs discarded by the PM component of DC-ISIS. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.14 | ColumnisisSysStatCSNPError | read-only | current | The count of badly formed CSNPs discarded by the PM component of DC-ISIS. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.15 | ColumnisisSysStatPSNPError | read-only | current | The count of badly formed PSNPs discarded by the PM component of DC-ISIS. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.16 | ColumnisisSysStatLSPQueueLen | read-only | current | The count of received LSPs that are queued internally in the PM component of DC-ISIS, awaiting processing. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.17 | ColumnisisSysStatFragsRebuilt | read-only | current | Number of LSP fragments that the local system has generated. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.18 | ColumnisisSysStatLSPRexmits | read-only | current | Number of LSPs that have been retransmitted. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.19 | ColumnisisSysStatLSPRegens | read-only | current | Number of LSPs that have been regenerated. An LSP is regenerated when it is nearing the end of its lifetime and it has not changed. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.20 | ColumnisisSysStatPurgesInitiated | read-only | current | Number of LSP purges that have been initiated by this instance of IS-IS. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.21 | ColumnisisSysStatLSPCount | read-only | current | The number of LSPs in the database at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.23 | ColumnisisSysStatPurgesIniLocal | read-only | current | Number of LSP purges initiated by this instance of IS-IS, of LSPs that were originated locally. This field behaves like an SNMP counter. It only increases, nev… |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.24 | ColumnisisSysStatPurgesIniRemote | read-only | current | Number of LSP purges initiated by this instance of IS-IS, of LSPs that were originated remotely. This field behaves like an SNMP counter. It only increases, ne… |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.25 | ColumnisisSysStatPurgesIniRemSNP | read-only | current | Number of LSP purges initiated by this instance of IS-IS, of LSPs that were originated remotely, due to receiving a SNP. This field behaves like an SNMP counte… |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.26 | ColumnisisSysStatPurgesIniRemExp | read-only | current | Number of LSP purges initiated by this instance of IS-IS, of LSPs that were originated remotely, because they have expired. This field behaves like an SNMP cou… |
| 1.3.6.1.4.1.629.10.10.1.5.1.1.27 | ColumnisisSysStatPurgesIniRemPrs | read-only | current | Number of LSP purges initiated by this instance of IS-IS, of LSPs that were originated remotely, due to peer restart. This field behaves like an SNMP counter. … |
| 1.3.6.1.4.1.629.10.10.1.5.2 | TableisisCircuitCounterTable | not-accessible | current | Circuit specific counters for this Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1 | RowisisCircuitCounterEntry | not-accessible | current | An isisCircuitCounterEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.1 | ColumnisisCircuitType | not-accessible | current | What type of circuit saw these counts? The point to point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point to point links. Thus we c… |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.2 | ColumnisisCircAdjChanges | read-only | current | The number of times an adjacency state change has occurred on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.3 | ColumnisisCircNumAdj | read-only | current | The number of adjacencies on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.4 | ColumnisisCircInitFails | read-only | current | The number of times initialization of this circuit has failed. This counts events such as PPP NCP failures. Failures to form an adjacency are counted by isisCi… |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.5 | ColumnisisCircRejAdjs | read-only | current | The number of times an adjacency has been rejected on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.6 | ColumnisisCircIDFieldLenMismatches | read-only | current | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.7 | ColumnisisCircMaxAreaAddrMismatches | read-only | current | The number of times an IS-IS control PDU with a max area address field different to that for this system has been received. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.8 | ColumnisisCircAuthTypeFails | read-only | current | The number of times an IS-IS control PDU with an auth type field different to that for this system has been received. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.9 | ColumnisisCircAuthFails | read-only | current | The number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation. |
| 1.3.6.1.4.1.629.10.10.1.5.2.1.10 | ColumnisisCircLANDesISChanges | read-only | current | The number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero. |
| 1.3.6.1.4.1.629.10.10.1.5.3 | TableisisPacketCounterTable | not-accessible | current | Information about IS-IS protocol traffic at one level on one circuit in one direction. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1 | RowisisPacketCounterEntry | not-accessible | current | Information about IS-IS protocol traffic at one level on one circuit in one direction |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.1 | ColumnisisPacketCountLevel | not-accessible | current | The level at which these PDU counts have been collected. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.2 | ColumnisisPacketCountDirection | not-accessible | current | Were we sending or receiving these PDUs? |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.3 | ColumnisisPacketCountIIHello | read-only | current | The number of IS-IS Hello PDUs seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circu… |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.4 | ColumnisisPacketCountISHello | read-only | current | The number of ES-IS Hello PDUs seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.5 | ColumnisisPacketCountESHello | read-only | current | The number of ES Hello PDUs seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.6 | ColumnisisPacketCountLSP | read-only | current | The number of IS-IS LSPs seen in this direction at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.7 | ColumnisisPacketCountCSNP | read-only | current | The number of IS-IS CSNPs seen in this direction at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.8 | ColumnisisPacketCountPSNP | read-only | current | The number of IS-IS PSNPs seen in this direction at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.9 | ColumnisisPacketCountUnknown | read-only | current | The number of unknown IS-IS PDUs seen at this level. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.10 | ColumnisisPacketCountDiscardedIIH | read-only | current | The number of IIH PDUs that have been discarded. This field is always zero for outgoing PDUs. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.11 | ColumnisisPacketCountDiscardedLSP | read-only | current | The number of LSP PDUs that have been discarded by the SDC component of DC-ISIS. This field is always zero for outgoing PDUs. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.12 | ColumnisisPacketCountDiscardedCSNP | read-only | current | The number of CSNP PDUs that have been discarded by the SDC component of DC-ISIS. This field is always zero for outgoing PDUs. |
| 1.3.6.1.4.1.629.10.10.1.5.3.1.13 | ColumnisisPacketCountDiscardedPSNP | read-only | current | The number of PSNP PDUs that have been discarded by the SDC component of DC-ISIS. This field is always zero for outgoing PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6 | NodeisisISAdj | |||
| 1.3.6.1.4.1.629.10.10.1.6.1 | TableisisISAdjTable | not-accessible | current | The table of adjacencies to Intermediate Systems. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1 | RowisisISAdjEntry | not-accessible | current | Each entry corresponds to one adjacency to an Intermediate System on this system. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.1 | ColumnisisISAdjIndex | not-accessible | current | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjace… |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.2 | ColumnisisISAdjState | read-only | current | The state of the adjacency. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.3 | ColumnisisISAdj3WayState | read-only | current | The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state, and are not intended to match isisISAdj… |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.4 | ColumnisisISAdjNeighSNPAAddress | read-only | current | The SNPA address of the neighboring system. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.5 | ColumnisisISAdjNeighSysType | read-only | current | The type of the neighboring system. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.6 | ColumnisisISAdjNeighSysID | read-only | current | The system ID of the neighboring Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.7 | ColumnisisISAdjNbrExtendedCircID | read-only | current | The 4 byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.8 | ColumnisisISAdjUsage | read-only | current | How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and… |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.9 | ColumnisisISAdjHoldTimer | read-only | current | The holding time in seconds for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.10 | ColumnisisISAdjNeighPriority | read-only | current | Priority of the neighboring Intermediate System for becoming the Designated Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.11 | ColumnisisISAdjLastUpTime | read-only | current | If the isisISAdjState is in state 'up', the value of sysUpTime when the adjacency most recently entered the state 'up', or 0 if it has never been in state 'up'. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.12 | ColumnisisISAdjRestartCapable | read-only | current | Does the neighbor support restart signalling? This object is set to 'true' if the peer includes the restart TLV in IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.13 | ColumnisisISAdjPeerRestartState | read-only | current | Is the peer currently restarting? Set to 'notRestarting' if the neighbor is not restarting (is not including a restart TLV in the IIH, or is not setting the RR… |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.14 | ColumnisisISAdjSuppressed | read-only | current | Has the peer requested that the adjacency be suppressed? If set to 'true', the adjacency will not be added to the local LSP. This object is set to 'true' if th… |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.15 | ColumnisisISAdjNeighLanID | read-only | current | On a broadcast circuit, the LAN ID reported by the neighbor for the Designated Intermediate System on this circuit at this level. For a non-broadcast circuit, … |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.16 | ColumnisisISAdjNeighHostname | read-only | current | The hostname corresponding to isisISAdjNeighSysID. This is the null string if isisSdEntMapHostnames is 'false' or if no hostname is known. |
| 1.3.6.1.4.1.629.10.10.1.6.1.1.17 | ColumnisisISAdjNeighLanIDHostname | read-only | current | The hostname corresponding to the system ID part of the isisISAdjNeighLanID object. This is the null string if the isisISAdjNeighLanID object is null, if isisS… |
| 1.3.6.1.4.1.629.10.10.1.6.2 | TableisisISAdjAreaAddrTable | not-accessible | current | This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.2.1 | RowisisISAdjAreaAddrEntry | not-accessible | current | Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.2.1.1 | ColumnisisISAdjAreaAddrIndex | not-accessible | current | An index for the areas associated with one neighbor. This provides a simple way to walk the table. |
| 1.3.6.1.4.1.629.10.10.1.6.2.1.2 | ColumnisisISAdjAreaAddress | read-only | current | One Area Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.629.10.10.1.6.3 | TableisisISAdjIPAddrTable | not-accessible | current | This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. If the isisSysRestrictLanAdjsToSubnet object … |
| 1.3.6.1.4.1.629.10.10.1.6.3.1 | RowisisISAdjIPAddrEntry | not-accessible | current | Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.3.1.1 | ColumnisisISAdjIPAddrIndex | not-accessible | current | An index to this table which identifies the IP addresss to which this entry belongs. |
| 1.3.6.1.4.1.629.10.10.1.6.3.1.2 | ColumnisisISAdjIPAddrType | read-only | current | The type of one IP Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.629.10.10.1.6.3.1.3 | ColumnisisISAdjIPAddrAddress | read-only | current | One IP Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.629.10.10.1.6.4 | TableisisISAdjProtSuppTable | not-accessible | current | This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.4.1 | RowisisISAdjProtSuppEntry | not-accessible | current | Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.4.1.1 | ColumnisisISAdjProtSuppProtocol | not-accessible | current | One supported protocol as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.629.10.10.1.6.4.1.5 | ColumnisisISAdjProtSuppLocalSupport | read-only | current | Whether local configuration allows use of this protocol to this neighbor. The value 'false' indicates that the protocol is unusable. |
| 1.3.6.1.4.1.629.10.10.1.6.4.1.6 | ColumnisisISAdjProtSuppBfdStatus | read-only | current | BFD session state for this protocol. The state inactive(2) indicates that the protocol is unusable for forwarding because a BFD session cannot be established o… |
| 1.3.6.1.4.1.629.10.10.1.6.5 | TableisisISAdjMtSupportedTable | not-accessible | current | This table contains the set of topologies supported by neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.5.1 | RowisisISAdjMtSupportedEntry | not-accessible | current | Each entry contains one topology reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.629.10.10.1.6.5.1.4 | ColumnisisISAdjMtSuppMtId | not-accessible | current | A topology that is supported on this adjacency. |
| 1.3.6.1.4.1.629.10.10.1.6.5.1.5 | ColumnisisISAdjMtSuppLocalSupport | read-only | current | Whether this topology is also supported locally on this circuit. The value is 'true' if there is a corresponding row in the isisMtCircStatusTable with isisMtCi… |
| 1.3.6.1.4.1.629.10.10.1.7 | NodeisisReachAddr | |||
| 1.3.6.1.4.1.629.10.10.1.8 | NodeisisIPReachAddr | |||
| 1.3.6.1.4.1.629.10.10.1.8.1 | TableisisIPRATable | not-accessible | current | The table of IP Reachable Addresses to networks, subnetworks or hosts, learned automatically. DC-ISIS does not support the manual addition of entries using thi… |
| 1.3.6.1.4.1.629.10.10.1.8.1.1 | RowisisIPRAEntry | not-accessible | current | Each entry defines an IP Reachable Address to a network, subnetwork or host. Each IP Reachable Address may have multiple entries in the table, one for each equ… |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.1 | ColumnisisIPRADestType | not-accessible | current | The type of this IP Reachable Address. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.2 | ColumnisisIPRADest | not-accessible | current | The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.3 | ColumnisisIPRADestPrefixLen | not-accessible | current | The length of the IP Netmask for Reachability Address. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.4 | ColumnisisIPRANextHopIndex | not-accessible | current | Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.5 | ColumnisisIPRANextHopType | read-only | current | The type of the IP next hop address. For the DC-ISIS implementation, this field is not stored and is therefore not returned in GETs for this MIB. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.6 | ColumnisisIPRANextHop | read-only | current | The IP next hop to this destination. For the DC-ISIS implementation, this field is not stored and is therefore not returned in GETs for this MIB. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.7 | ColumnisisIPRAType | read-only | current | The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of rout… |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.8 | ColumnisisIPRAExistState | read-only | current | The state of this IP Reachable Address. This object follows the ExistenceState behavior. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.9 | ColumnisisIPRAAdminState | read-only | current | The administrative state of the IP Reachable Address. This object follows the AdminState behavior. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.10 | ColumnisisIPRAMetric | read-only | current | The metric value for reaching the specified destination over this circuit. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.11 | ColumnisisIPRAMetricType | read-only | current | Indicates whether the metric is internal or external. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.12 | ColumnisisIPRAFullMetric | read-only | current | The wide metric value for reaching the specified destination over this circuit. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.13 | ColumnisisIPRASNPAAddress | read-only | current | The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. DC-ISIS does not support this field. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.14 | ColumnisisIPRASourceType | read-only | current | The origin of this route. |
| 1.3.6.1.4.1.629.10.10.1.8.1.1.16 | ColumnisisIPRAMtId | read-only | current | The topology that this reachable address is in. |
| 1.3.6.1.4.1.629.10.10.1.9 | NodeisisLSPDataBase | |||
| 1.3.6.1.4.1.629.10.10.1.9.1 | TableisisLSPSummaryTable | not-accessible | current | The table of LSP Headers. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1 | RowisisLSPSummaryEntry | not-accessible | current | Each entry provides a summary describing an LSP currently stored in the system. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.1 | ColumnisisLSPLevel | not-accessible | current | At which level does this LSP appear? |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.2 | ColumnisisLSPID | not-accessible | current | The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.3 | ColumnisisLSPSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.4 | ColumnisisLSPZeroLife | read-only | current | Is this LSP being purged by this System? |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.5 | ColumnisisLSPChecksum | read-only | current | The 16 bit Fletcher Checksum. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.6 | ColumnisisLSPLifetimeRemain | read-only | current | The remaining lifetime in seconds for this LSP. For a current LSP (isisLSPZeroLife is 'false'), this indicates the time remaining before the LSP will expire. F… |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.7 | ColumnisisLSPPDULength | read-only | current | The length of this LSP. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.8 | ColumnisisLSPAttributes | read-only | current | Flags carried by the LSP. |
| 1.3.6.1.4.1.629.10.10.1.9.1.1.9 | ColumnisisLSPIDHostname | read-only | current | The hostname corresponding to the system ID part of the isisLSPID object. This is the null string if no hostname is known. |
| 1.3.6.1.4.1.629.10.10.1.9.2 | TableisisLSPTLVTable | not-accessible | current | The contents of each LSP. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1 | RowisisLSPTLVEntry | not-accessible | current | Each entry describes an LSP current stored in the system. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.1 | ColumnisisLSPTLVIndex | not-accessible | current | The index of this TLV in the LSP. The first TLV has index 1 and the Nth TLV has an index of N. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.2 | ColumnisisLSPTLVSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.3 | ColumnisisLSPTLVChecksum | read-only | current | The 16 bit Fletcher Checksum. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.4 | ColumnisisLSPTLVType | read-only | current | The type of this TLV. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.5 | ColumnisisLSPTLVLen | read-only | current | The length of this TLV. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.6 | ColumnisisLSPTLVValue | read-only | current | The value of this TLV. |
| 1.3.6.1.4.1.629.10.10.1.9.2.1.7 | ColumnisisLSPTLVHostname | read-only | current | The hostname corresponding to the system ID part of the isisLSPID object. This is the null string if no hostname is known. |
| 1.3.6.1.4.1.629.10.10.1.10 | NodeisisNotification | |||
| 1.3.6.1.4.1.629.10.10.1.10.1 | NodeisisNotificationEntry | |||
| 1.3.6.1.4.1.629.10.10.1.10.1.1 | ScalarisisPduLspId | accessible-for-notify | current | An Octet String that uniquely identifies a Link State PDU. |
| 1.3.6.1.4.1.629.10.10.1.10.1.2 | ScalarisisPduFragment | accessible-for-notify | current | Holds up to 64 initial bytes of a PDU that triggered the notification. |
| 1.3.6.1.4.1.629.10.10.1.10.1.3 | ScalarisisPduFieldLen | accessible-for-notify | current | Holds the System ID length reported in PDU we received. |
| 1.3.6.1.4.1.629.10.10.1.10.1.4 | ScalarisisPduMaxAreaAddress | accessible-for-notify | current | Holds the Max Area Addresses reported in a PDU we received. |
| 1.3.6.1.4.1.629.10.10.1.10.1.5 | ScalarisisAdjState | accessible-for-notify | current | The current state of an adjacency. |
| 1.3.6.1.4.1.629.10.10.1.10.1.6 | ScalarisisErrorOffset | accessible-for-notify | current | An offset to a problem in a PDU. If the problem is a malformed TLV, this points to the begining of the TLV. If the problem is in the header, this points to the… |
| 1.3.6.1.4.1.629.10.10.1.10.1.7 | ScalarisisErrorTLVType | accessible-for-notify | current | The type for a malformed TLV. |
| 1.3.6.1.4.1.629.10.10.1.10.1.8 | ScalarisisNotificationSysInstance | accessible-for-notify | current | The unique identifier of the Integrated IS-IS instance for this notification. |
| 1.3.6.1.4.1.629.10.10.1.10.1.9 | ScalarisisNotificationSysLevelIndex | accessible-for-notify | current | The system level for this notification. |
| 1.3.6.1.4.1.629.10.10.1.10.1.10 | ScalarisisNotificationAreaAddress | accessible-for-notify | current | An Area Address. |
| 1.3.6.1.4.1.629.10.10.1.10.1.11 | ScalarisisNotificationISAdjIndex | accessible-for-notify | current | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. |
| 1.3.6.1.4.1.629.10.10.1.10.1.12 | ScalarisisNotificationDisState | accessible-for-notify | current | The current state of the DIS. |
| 1.3.6.1.4.1.629.10.10.1.10.1.13 | ScalarisisNotificationAttachedState | accessible-for-notify | current | The current state of attachment. |
| 1.3.6.1.4.1.629.10.10.1.10.1.14 | ScalarisisNotificationNeighSysID | accessible-for-notify | current | The system ID of the neighboring Intermediate System. |
| 1.3.6.1.4.1.629.10.10.1.10.1.15 | ScalarisisNotificationMtId | accessible-for-notify | current | The topology for which the IS-IS instance is entering or leaving attached state. |
| 1.3.6.1.4.1.629.10.10.1.11 | NodeisisPmObjects | |||
| 1.3.6.1.4.1.629.10.10.1.11.1 | TableisisPmSjTable | not-accessible | current | This table contains information on joins on which the Protocol Manager acts as a slave. Each row in this table represents one slave join in the Protocol Manage… |
| 1.3.6.1.4.1.629.10.10.1.11.1.1 | RowisisPmSjEntry | not-accessible | current | Represents a join for which the Protocol Manager is slave. |
| 1.3.6.1.4.1.629.10.10.1.11.1.1.1 | ColumnisisPmSjInterface | not-accessible | current | Identifies the interface provided on this slave join. |
| 1.3.6.1.4.1.629.10.10.1.11.1.1.2 | ColumnisisPmSjMasterEntity | not-accessible | current | Index which uniquely identifies the master entity among other entities of the same component within this instance of DC-ISIS. |
| 1.3.6.1.4.1.629.10.10.1.11.1.1.3 | ColumnisisPmSjJoinStatus | read-only | current | The status of the slave join. |
| 1.3.6.1.4.1.629.10.10.1.11.2 | TableisisPmMjTable | not-accessible | current | This table controls which entities the Protocol Manager should join to as master. Each join is represented by a row in this table. The status of each join is r… |
| 1.3.6.1.4.1.629.10.10.1.11.2.1 | RowisisPmMjEntry | not-accessible | current | Represents a join for which the Protocol Manager is master. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.1 | ColumnisisPmMjInterface | not-accessible | current | Identifies the interface required of this master join. This object follows the index behavior. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.2 | ColumnisisPmMjSlaveEntity | not-accessible | current | Identifies the slave entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slav… |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.3 | ColumnisisPmMjAddrType | not-accessible | current | Identifies the slave entity to join with. This is used along with the isisPmMjSlaveEntity (with address subtype 'none') in the join user data on an RPI join, t… |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.4 | ColumnisisPmMjRowStatus | read-create | current | The row status for this master join, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.5 | ColumnisisPmMjAdminStatus | read-create | current | The administrative status of this master join, used to start and stop the join. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.6 | ColumnisisPmMjOperStatus | read-only | current | The current operational status of this master join. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.7 | ColumnisisPmMjJoinStatus | read-only | current | The status of the master join. |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.9 | ColumnisisPmMjMtId | not-accessible | current | The topology that this join is for. Note that this only applies to RPI joins. If multi-topology IS-IS is not supported then this field should be set to zero. T… |
| 1.3.6.1.4.1.629.10.10.1.11.2.1.10 | ColumnisisPmMjSubAddrFamily | read-create | current | Identifies the sub address family this join is for. Note that this only applies to RPI joins. The value is ignored if isisPmMjInterface is not ifRtProtoInput. |
| 1.3.6.1.4.1.629.10.10.1.11.3 | TableisisIgpShortcutTable | not-accessible | current | The table of IGP shortcut tunnel interfaces known to DC-ISIS. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1 | RowisisIgpShortcutEntry | not-accessible | current | Each entry corresponds to one IGP shortcut tunnel interface known to DC-ISIS on this system. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.1 | ColumnisisShortcutIfIndex | not-accessible | current | The value of ifIndex for the IGP shortcut tunnel interface. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.2 | ColumnisisShortcutRemoteAddressType | read-only | current | The Type of IP address for this remote address. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.3 | ColumnisisShortcutRemoteAddress | read-only | current | The IP Address value for this remote address. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.4 | ColumnisisShortcutMetricType | read-only | current | The type of metric value assigned to this IGP shortcut. The type of metric value can be one of the following. - 'metricTypeAbsolute'; the metric defined by isi… |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.5 | ColumnisisShortcutMetricValue | read-only | current | The metric assigned to this IGP shortcut. If isisShortcutMetricType is set to 'metricTypeAbsolute' then this field takes a value in the range of 1 - 16777215. … |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.6 | ColumnisisShortcutOperStatus | read-only | current | The operational status of the IGP shortcut interface. The IGP shortcut interface is only usable by DC-ISIS if isisShortcutOperStatus is set to 'up'. |
| 1.3.6.1.4.1.629.10.10.1.11.3.1.7 | ColumnisisShortcutPendingDeletion | read-only | current | If 'true' then the IGP shortcut interface has been deleted but has not yet been removed from DC-ISIS because it might still be in use as a TE-tunnel next hop. |
| 1.3.6.1.4.1.629.10.10.1.12 | NodeisisSdObjects | |||
| 1.3.6.1.4.1.629.10.10.1.12.1 | TableisisSdEntTable | not-accessible | current | Each entry in this table represents an SDC entity. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1 | RowisisSdEntEntry | not-accessible | current | Each entry represents an SDC entity. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.1 | ColumnisisSdEntIndex | not-accessible | current | Non-zero index which identifies an SDC entity. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.2 | ColumnisisSdEntRowStatus | read-create | current | The row status for this SDC Entity Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.3 | ColumnisisSdEntAdminStatus | read-create | current | The administrative status of this SDC entity, used to activate and deactivate SDC. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.4 | ColumnisisSdEntOperStatus | read-only | current | The current operational status of this SDC entity. |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.5 | ColumnisisSdEntMapHostnames | read-create | current | Should SDC map system IDs to hostnames? If 'true', SDC will fill in the isisISAdjNeighHostname and isisISAdjNeighLanIDHostname objects (if a hostname is known)… |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.6 | ColumnisisSdEntAuthSNPs | read-create | current | Should SDC authenticate SNP packets? If 'false', SDC will not check the authentication on SNP packets. If 'true' then it will. Setting this field is sometimes … |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.7 | ColumnisisSdEntBfdProviderIndex | read-create | current | The entity index for the Bidirectional Forwarding Detection (BFD) provider to which this SDC entity should join. Zero indicates that no BFD provider is availab… |
| 1.3.6.1.4.1.629.10.10.1.12.1.1.8 | ColumnisisSdEntStopAdjDuplIDs | read-create | current | Flag indicating whether this SDC should prevent an adjacency forming to a neighbor with the same System ID but a different SNPA address as an existing neighbor… |
| 1.3.6.1.4.1.629.10.10.1.12.2 | TableisisSdMjTable | not-accessible | current | This table controls which entities an SDC entity should join to as master. Each join is represented by a row in this table. The status of each join is represen… |
| 1.3.6.1.4.1.629.10.10.1.12.2.1 | RowisisSdMjEntry | not-accessible | current | Represents a join for which this SDC entity is master. |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.1 | ColumnisisSdMjInterface | not-accessible | current | Identifies the interface required of this master join. Since an SDC only has a single join on any of its interfaces, this serves with the SDC entity index in u… |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.2 | ColumnisisSdMjRowStatus | read-create | current | The row status for this master join, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.3 | ColumnisisSdMjAdminStatus | read-create | current | The administrative status of this master join, used to start and stop the join. |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.4 | ColumnisisSdMjOperStatus | read-only | current | The current operational status of this master join. |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.5 | ColumnisisSdMjEntityIndex | read-create | current | Identifies the slave entity to join with. This index (possibly along with isisSdMjEntityType - see below) is used in the join user data, to enable FTI-specific… |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.6 | ColumnisisSdMjEntityType | read-create | current | If isisSdMjInterface is ifSubnetDependent, this field indicates the type of entity to join with. This index along with isisSdMjEntityType is used in the join u… |
| 1.3.6.1.4.1.629.10.10.1.12.2.1.7 | ColumnisisSdMjJoinStatus | read-only | current | The status of the master join. |
| 1.3.6.1.4.1.629.10.10.2 | NodeisisNotifications | |||
| 1.3.6.1.4.1.629.10.10.2.0 | NodeisisTrapPrefix | |||
| 1.3.6.1.4.1.629.10.10.2.0.1 | NotificationisisDatabaseOverload | current | This notification is generated when the system enters or leaves the Overload state. The number of times this has been generated and cleared is kept track of by… | |
| 1.3.6.1.4.1.629.10.10.2.0.2 | NotificationisisManualAddressDrops | current | This notification is generated when one of the manual areaAddresses assigned to this system is ignored when computing routes. The object isisNotificationAreaAd… | |
| 1.3.6.1.4.1.629.10.10.2.0.3 | NotificationisisIDLenMismatch | current | A notification sent when we receive a PDU with a different value of the System ID Length. This notification includes an index to identify the circuit where we … | |
| 1.3.6.1.4.1.629.10.10.2.0.4 | NotificationisisMaxAreaAddressesMismatch | current | A notification sent when we receive a PDU with a different value of the Maximum Area Addresses. This notification includes the header of the packet, which may … | |
| 1.3.6.1.4.1.629.10.10.2.0.5 | NotificationisisOwnLSPPurge | current | A notification sent when we receive a PDU with our systemID and zero age. This notification includes the circuit Index and router ID from the LSP, if available… | |
| 1.3.6.1.4.1.629.10.10.2.0.6 | NotificationisisAreaMismatch | current | A notification sent when we receive a Hello PDU from an IS which does not share any area address. This notification includes the header of the packet, which ma… | |
| 1.3.6.1.4.1.629.10.10.2.0.7 | NotificationisisRejectedAdjacency | current | A notification sent when we receive a Hello PDU from an IS, but do not establish an adjacency for some reason. This should be an edge-triggered notification. W… | |
| 1.3.6.1.4.1.629.10.10.2.0.8 | NotificationisisAdjacencyChange | current | A notification sent when an adjacency changes state, entering or leaving state up. The first 6 bytes of the isisPduLspId are the SystemID of the adjacent IS. T… | |
| 1.3.6.1.4.1.629.10.10.2.0.9 | NotificationisisLSPErrorDetected | current | This notification is generated when we receive an LSP with a parse error. The isisCircIfIndex holds in index of the circuit on which the PDU arrived. The isisP… | |
| 1.3.6.1.4.1.629.10.10.2.0.10 | NotificationisisAttemptToExceedMaxSequence | current | When the sequence number on an LSP we generate wraps the 32-bit sequence counter, we purge and wait to re-announce this information. This notification describe… | |
| 1.3.6.1.4.1.629.10.10.2.0.11 | NotificationisisSequenceNumberSkip | current | When we receive an LSP with our System ID and different contents, we may need to reissue the LSP with a higher sequence number. We send this notification if we… | |
| 1.3.6.1.4.1.629.10.10.2.0.12 | NotificationisisCircIndTable | current | A notification sent when the value of isisCircOperState for a circuit changes to operStatusUp, operStatusDown or operStatusActFailed. | |
| 1.3.6.1.4.1.629.10.10.2.0.13 | NotificationisisExtPassCircuitInd | current | A notification sent when the value of isisCircOperState for a circuit not configured to run the IS-IS protocol (such as an external, TE-only or passive circuit… | |
| 1.3.6.1.4.1.629.10.10.2.0.14 | NotificationisisOperStateChange | current | This notification is generated when the IS-IS system changes operational state to operStatusUp, operStatusDown or operStatusActFailed. | |
| 1.3.6.1.4.1.629.10.10.2.0.15 | NotificationisisLspAuthFailure | current | An IS-IS instance sends this notification if a received LSP has failed to authenticate. | |
| 1.3.6.1.4.1.629.10.10.2.0.16 | NotificationisisHelloAuthFailure | current | An IS-IS instance sends this notification if a received Hello has failed to authenticate. | |
| 1.3.6.1.4.1.629.10.10.2.0.17 | NotificationisisAttachedStateChange | current | This notification is generated when the Attached state for a topology changes and the topology is operationally up. | |
| 1.3.6.1.4.1.629.10.10.2.0.18 | NotificationisisDisChange | current | An IS-IS instance sends this notification if the DIS changes at level 1 or level 2. | |
| 1.3.6.1.4.1.629.10.10.3 | NodeisisConformance | |||
| 1.3.6.1.4.1.629.10.10.3.1 | NodeisisGroups | |||
| 1.3.6.1.4.1.629.10.10.3.1.1 | GroupisisSystemGroup | current | The collections of objects used to manage an IS-IS router. | |
| 1.3.6.1.4.1.629.10.10.3.1.2 | GroupisisCircuitGroup | current | The collection of objects used to describe an IS-IS Circuit. | |
| 1.3.6.1.4.1.629.10.10.3.1.3 | GroupisisISAdjGroup | current | The collections of objects used to manage an IS-IS Adjacency. | |
| 1.3.6.1.4.1.629.10.10.3.1.4 | GroupisisNotificationObjectGroup | current | The objects used to record notification parameters. | |
| 1.3.6.1.4.1.629.10.10.3.1.5 | GroupisisNotificationGroup | current | The collections of notifications sent by an IS. | |
| 1.3.6.1.4.1.629.10.10.3.1.6 | GroupisisISPDUCounterGroup | current | The collections of objects used to count protocol PDUs. | |
| 1.3.6.1.4.1.629.10.10.3.1.8 | GroupisisISIPRADestGroup | current | The collections of objects used to manage configured IP addresses. | |
| 1.3.6.1.4.1.629.10.10.3.1.9 | GroupisisLSPGroup | current | The collections of objects used to observe the LSP Data Base. | |
| 1.3.6.1.4.1.629.10.10.3.1.10 | GroupisisDCAdditionGroup | current | The collection of Data Connection additions to the MIB. | |
| 1.3.6.1.4.1.629.10.10.3.2 | NodeisisCompliances | |||
| 1.3.6.1.4.1.629.10.10.3.2.1 | ComplianceisisCompliance | current | The compliance statement for agents that support the IS-IS MIB | |
| 1.3.6.1.4.1.629.10.10.3.2.2 | ComplianceisisAdvancedCompliance | current | The advanced compliance statement for agents that support the IS-IS MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminState | INTEGER { on(1), off(2) } | current | Type used in enabling and disabling a row. Values match those in RFC 2863. |
| CircuitID | OCTET STRING (SIZE(0|7)) | current | ID for a circuit. |
| DefaultMetric | Integer32 (0..63) | current | Integer sub-range for default metric for single hop. ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice. |
| FullMetric | Unsigned32 | current | Full Metric for IP Routes. Traffic Engineering extensions provide 32 bit metrics. |
| IsisAddrType | INTEGER { none(0), ipv4(1), ipv6(2), nsap(3), ipx(4) } | current | The type of address used on an RPI join. |
| IsisAddrTypeBits | BITS { ipv4(1), ipv6(2) } | current | The type of address supported. |
| IsisAdjLevel | INTEGER { reserved (0), level1(1), level2(2), level1and2(3) } | current | Identifies one or more levels. |
| IsisAdminStatus | INTEGER { adminStatusUp(1), adminStatusDown(2) } | current | The desired administrative state of a DC-ISIS entity. |
| IsisMjStatus | INTEGER { mjNotJoined(1), mjSentAddJoin(2), mjSentRegister(3), mjJoinActive(4), mjSentDelJoin(5), mjSentUnregister(6), mjJoinGone(7), mjFailedToRegister(8), mjFailingOver(9), mjFailed(10) } | current | The status of a Master Join. |
| IsisOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of a DC-ISIS entity. |
| IsisPDUHeader | OCTET STRING (SIZE(0..64)) | current | A block to contain the header from a PDU. |
| IsisPmInterfaceId | INTEGER { ifInterfaceInfo(1), ifRtProtoInput(2), ifCSPF(3), ifSDC(4) } | current | The type of interface to which a PM join applies. |
| IsisSdEntityType | INTEGER { ifProtocolManager(1), ifPDUInjectionTool(2) } | current | The type of entity to which an SDC Subnetwork Dependent join applies. |
| IsisSdInterfaceId | INTEGER { ifDataLink(1), ifSubnetDependent(2), ifBidirectionalForwarding(3) } | current | The type of interface to which an SD join applies. |
| IsisSjStatus | INTEGER { sjNotJoined(1), sjJoined(2), sjJoinActive(3), sjJoinUnreg(4), sjJoinGone(5), sjFailingOver(6), sjFailed(7) } | current | The status of a Slave Join. |
| IsisSysRestartType | INTEGER { none(0), start(1), restart(2) } | current | The type of restart procedures to follow when DC-ISIS activates. |
| ISLevel | INTEGER { none(0), area(1), domain(2) } | current | Identifies a level. |
| ISPriority | Integer32 (0..127) | current | Integer sub-range for IS-IS priority. |
| LevelState | INTEGER { off (1), on (2), waiting (3), overloaded(4) } | current | States of the IS-IS protocol. |
| LinkStatePDUID | OCTET STRING (SIZE(8)) | current | A Link State PDU Identifier. |
| LSPBuffSize | Integer32 (512..16000) | current | Integer sub range for LSP size. |
| MetricStyle | INTEGER { narrow(1), wide(2), both(3) } | current | Do we use 1195 style Metrics or wide metrics. |
| MetricType | INTEGER { internal(1), external(2) } | current | Is this an Internal or External Metric? |
| OSINSAddress | OCTET STRING (SIZE(0..20)) | current | OSI Network Service Address, e.g. NSAP, SNPA, or Network Entity Title |
| SupportedProtocol | INTEGER { iso8473(129), ipV6(142), ip(204) } | current | Types of network protocol supported by Integrated IS-IS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577. |
| SystemID | OCTET STRING (SIZE(6)) | current | A system ID. |
| Unsigned16TC | Unsigned32 (0..65535) | current | An Unsigned32 further restricted to 16 Bits. Note that the ASN.1 BER encoding may still require 24 Bits for some values. |
| Unsigned8TC | Unsigned32 (0..255) | current | An Unsigned32 further restricted to 8 Bits. Note that the ASN.1 BER encoding may still require 16 Bits for some values. |
| WideMetric | Unsigned32 (1..16777215) | current | Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric. Traffic Engineering extensions provide 24 bit metrics. |