MIB Viewer

DC-LMGR-MIB

54 objects
The MIB module for management of the DC-LMGR product.
Imported Objects
DC-MASTER-TCNumericIndexOrZero
INET-ADDRESS-MIBInetAddress InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.2.826.1IdentitydcLmgrThe MIB module for management of the DC-LMGR product.
1.2.826.1.1NodedcLmgrObjects
1.2.826.1.1.1TabledcLmgrLsrEntityTablenot-accessiblecurrentEach entry represents an instance of the Label Manager. Each instance is identified by LSR index.
1.2.826.1.1.1.1RowdcLmgrLsrEntityEntrynot-accessiblecurrentEach entry represents a Label Manager entity.
1.2.826.1.1.1.1.1ColumndcLmgrLsrEntityLsrIndexnot-accessiblecurrentLSR index for this dcLmgrLsrEntityEntry. This is the entity index passed in the Label Manager create parameters.
1.2.826.1.1.1.1.2ColumndcLmgrLsrEntityAdminStatusread-createcurrentAdministrative status for Label Manager. When dcLmgrLsrEntityRowStatus is 'active' and dcLmgrLsrEntityAdminStatus is 'up' Label Manager is active and only thes…
1.2.826.1.1.1.1.3ColumndcLmgrLsrEntityOperStatusread-onlycurrentThe current operational status of the Label Manager entity.
1.2.826.1.1.1.1.4ColumndcLmgrLsrEntityRowStatusread-createcurrentRow status for the Label Manager table entry, used to create and destroy table entries. When dcLmgrLsrEntityRowStatus is 'active' and dcLmgrLsrEntityAdminStatu…
1.2.826.1.1.1.1.5ColumndcLmgrLsrEntityMinLsiBuffersread-createcurrentMinimum number of buffers to allocate for Label Switch Interface requests. This number includes any buffers sent to the Label Switch Controller and awaiting a …
1.2.826.1.1.1.1.6ColumndcLmgrLsrEntityMaxLsiBuffersread-createcurrentMaximum number of buffers to allocate for Label Switch Interface requests. A value of 0 means no maximum. This field can not be changed when the row is active.
1.2.826.1.1.1.1.7ColumndcLmgrLscStatusread-onlycurrentDiagnostic field providing information about the status of the Label Switch Controller as seen by Label Manager.
1.2.826.1.1.1.1.8ColumndcLmgrLdbCountread-onlycurrentDiagnostic field providing information about the number of active interfaces between Label Manager and the its Label Database Interface users (DC-TPM and DC-RS…
1.2.826.1.1.1.1.9ColumndcLmgrLsrEntityLsrIdread-createcurrentAn ID that uniquely identifies this LSR within the network. The LSR ID is typically derived from one of the LSR's IPv4 addresses. It may be used for path vecto…
1.2.826.1.1.1.1.10ColumndcLmgrLsrEntityTranAddrTyperead-createcurrentThe type of the internetwork layer address used as the transport address. Currently this must be IPv4. See dcLmgrLsrEntityIpv6TranAddr, below, for the equivale…
1.2.826.1.1.1.1.11ColumndcLmgrLsrEntityTranAddrLenread-createcurrentThe length of the internetwork layer address used as the transport address for LDP Hello messages in the global label space and for messages originating on unn…
1.2.826.1.1.1.1.12ColumndcLmgrLsrEntityTranAddrread-createcurrentThe value of the internetwork layer address used as the transport address for LDP Hello messages in the global label space and for messages originating on unnu…
1.2.826.1.1.1.1.13ColumndcLmgrLsrEntityControlModeread-createcurrentThe LSP control mode that this LSR should adopt. This field is only used by Label Manager in systems where it supports LDP and/or CR-LDP.
1.2.826.1.1.1.1.14ColumndcLmgrLsrEntityMergeLspsread-createcurrentWhether this LSR should aim to merge LSPs, where permitted by the underlying hardware. This field is only used by Label Manager in systems where it supports LD…
1.2.826.1.1.1.1.15ColumndcLmgrLsrEntityLoopDetectionread-createcurrentWhether this LSR should perform loop detection. This field is only used by Label Manager in systems where it supports LDP and/or CR-LDP.
1.2.826.1.1.1.1.16ColumndcLmgrLsrEntityPerformGroupingread-createcurrentWhether Label Manager should perform LSP grouping on behalf of the LDBI user. This field is currently only used for systems supporting RSVP.
1.2.826.1.1.1.1.17ColumndcLmgrLsrAutoStaticLspsread-createcurrentWhether Label Manager should automatically activate or deactivate static LSPs when the interfaces on which they depend become active or inactive.
1.2.826.1.1.1.1.18ColumndcLmgrLsrDisplayPhpXCsread-createcurrentWhether Label Manager should display the virtual cross connects its sets up at the Egress node of Implicit Null and Explicit Null LSPs in the mplsXcTable. Thes…
1.2.826.1.1.1.1.19ColumndcLmgrLsrEntityIpv6TranAddrread-createcurrentThe value of the internetwork address used for messages originating on unnumbered interfaces in RSVP in an IPv6 network. This value also uniquely identifies th…
1.2.826.1.1.1.1.20ColumndcLmgrLsrEnableStaticP2MPread-createcurrentWhether Label Manager should allow configuration of static point-to-multipoint LSPs. Disabling point-to-multipoint support causes any statically configured poi…
1.2.826.1.1.1.1.21ColumndcLmgrLsrStaticP2MPActiveread-onlycurrentThe current state of support for static point-to-multipoint LSPs. This field is set to true when support for static point-to-multipoint LSPs is enabled. It is …
1.2.826.1.1.1.1.22ColumndcLmgrLsrLsiEntIndexread-createcurrentThe index of the Label Switch Controller instance which this LMGR is to join to as its LSI interface provider. If this value is not specified, or the value of …
1.2.826.1.1.1.1.23ColumndcLmgrLsrI3EntIndexread-createcurrentThe index of the I3 entity which this LMGR is to join to as its I3 interface provider. If this value is not specified, or the value of this object is 0, LMGR w…
1.2.826.1.1.1.1.24ColumndcLmgrLabelReleaseDelayread-createcurrentA length of time (in seconds) to wait after releasing an MPLS label before the label will be released to the general pool to be assigned to new LSPs. Changes m…
1.2.826.1.1.1.1.25ColumndcLmgrGlobalIdread-createcurrentThe Global ID is defined in RFC 6370 and uniquely identifies an operator. It is derived from a 4-octet AS number assigned to the operator and is used solely to…
1.2.826.1.1.1.1.26ColumndcLmgrNodeIdread-createcurrentThe Node ID is defined in RFC 6370 and is assigned by the operator within the scope of a Global ID.
1.2.826.1.1.1.1.27ColumndcLmgrFtModeread-createcurrentThe fault tolerant mode used by Label Manager if used in a fault tolerant environment. The default value is full replication which should be used in conjunctio…
1.2.826.1.1.2TabledcLmgrLsrLspXcTablenot-accessiblecurrentEach entry represents an instance of an LSP cross-conect between a single in-segment and a single out-segment.
1.2.826.1.1.2.1RowdcLmgrLsrLspXcEntrynot-accessiblecurrentEach entry represents an LSP cross connect.
1.2.826.1.1.2.1.2ColumndcLmgrLsrLspXcIndexnot-accessiblecurrentXC index for this dcLmgrLsrLspXc. This is the XC index assigned by Label Manager for the LSP.
1.2.826.1.1.2.1.3ColumndcLmgrLsrLspInSegIndexnot-accessiblecurrentIndex for the in segment. This is the index assigned by Label Manager for the in segment.
1.2.826.1.1.2.1.4ColumndcLmgrLsrLspInSegIfIndexread-onlycurrentIf index for the in segment. This is the If index specified on setting up the in segment.
1.2.826.1.1.2.1.5ColumndcLmgrLsrLspInSegLabelread-onlycurrentTop label for the in segment. This is the Label assigned by Label Manager Label Library for the in segment.
1.2.826.1.1.2.1.6ColumndcLmgrLsrLspOutSegIndexnot-accessiblecurrentIndex for the out segment. This is the index assigned by Label Manager for the out segment.
1.2.826.1.1.2.1.7ColumndcLmgrLsrLspOutSegIfIndexread-onlycurrentInterface Index for the out segment. This is the interface index specified when setting up the out segment.
1.2.826.1.1.2.1.8ColumndcLmgrLsrLspOutSegLabelread-onlycurrentTop label for the out segment. This is the label specified by the remote LSR for the out segment.
1.2.826.1.1.2.1.9ColumndcLmgrLsrLspOutSegNHAddrTyperead-onlycurrentThe type of the next hop address for the out segment.
1.2.826.1.1.2.1.10ColumndcLmgrLsrLspOutSegNextHopAddrread-onlycurrentNext hop address for the out segment. This is the address specified by the remote LSR for the out segment.
1.2.826.1.2NodedcLmgrConformance
1.2.826.1.2.1NodedcLmgrCompliances
1.2.826.1.2.1.1CompliancedcLmgrCompliancecurrentThe compliance statement for the DC-LMGR product.
1.2.826.1.2.2NodedcLmgrGroups
1.2.826.1.2.2.2GroupdcLmgrEntityGroupcurrentLabel Manager Entity Objects.
1.2.826.1.2.2.3GroupdcLmgrMiscGroupcurrentMiscellaneous Non-Mandatory Objects.
Type Definitions
NameSyntaxStatusDescription
DcLmgrAdminStatusINTEGER { adminStatusUp(1), adminStatusDown(2) }currentThe desired administrative state of a Label Manager entity.
DcLmgrControlModesINTEGER { ordered(1), independent(2) }currentThe Control Mode of Label Manager.
DcLmgrFtModesINTEGER { full(1), recovery(2) }currentThe Fault Tolerant Mode of Label Manager.
DcLmgrIndexUnsigned32currentThe index value identifying a Label Manager entity.
DcLmgrOperStatusINTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) }currentThe current operational state of a Label Manager entity. If the operational state is goingDown then a request to activate the Label Manager entity is rejected.
DcLmgrPartnerStatusINTEGER { initial(0), activating(1), active(2), deactivating(3), failedOver(4), failed(5), unavailable(6) }currentThe state of a Label Manager partner entity.