DC-LMP-PROD
52 objects
The MIB module for management of the DC-LMP product.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.5 | IdentitydcLmp | The MIB module for management of the DC-LMP product. | ||
| 1.3.6.1.4.1.629.10.5.1 | NodedcLmpObjects | |||
| 1.3.6.1.4.1.629.10.5.1.1 | TabledcLmpProductTable | not-accessible | current | The table of LMP entities. |
| 1.3.6.1.4.1.629.10.5.1.1.1 | RowdcLmpProductEntry | not-accessible | current | Each entry represents an instance of the DC-LMP product. |
| 1.3.6.1.4.1.629.10.5.1.1.1.1 | ColumndcLmpProductIndex | not-accessible | current | The index of this dcLmpProductEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.3.6.1.4.1.629.10.5.1.1.1.2 | ColumndcLmpProductNodeId | read-create | current | The Node ID for this LMP node. |
| 1.3.6.1.4.1.629.10.5.1.1.1.3 | ColumndcLmpProductSocketIfIndex | read-create | current | Management assigned interface identifier for the IP Sockets component interface to DC-LMP. |
| 1.3.6.1.4.1.629.10.5.1.1.1.4 | ColumndcLmpProductSocketBufPoolSize | read-create | current | The number of buffers available for sending sockets data to a given neighbor. This is used to pace the sockets data flow. There can never be more than this man… |
| 1.3.6.1.4.1.629.10.5.1.1.1.5 | ColumndcLmpProductDLMIBufPoolSize | read-create | current | The number of pre-reserved buffers available for interacting with the DLM provider. This is used to ensure DLM interactions do not fail in buffer shortage cond… |
| 1.3.6.1.4.1.629.10.5.1.1.1.6 | ColumndcLmpProductResendInterval | read-create | current | The initial interval in milliseconds between resends of LMP messages, where per-message type values are not provided. |
| 1.3.6.1.4.1.629.10.5.1.1.1.7 | ColumndcLmpProductResendDelta | read-create | current | The default factor that governs the speed with which the sender increases the retransmission interval. |
| 1.3.6.1.4.1.629.10.5.1.1.1.8 | ColumndcLmpProductHelloIntvalDflt | read-create | current | This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicates how frequently LMP Hello mess… |
| 1.3.6.1.4.1.629.10.5.1.1.1.9 | ColumndcLmpProductHelloIntvalDfltMin | read-create | current | This object specifies the default minimum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMin. This field can be set… |
| 1.3.6.1.4.1.629.10.5.1.1.1.10 | ColumndcLmpProductHelloIntvalDfltMax | read-create | current | This object specifies the default maximum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMax. This field can be set… |
| 1.3.6.1.4.1.629.10.5.1.1.1.11 | ColumndcLmpProductHelloDeadIvlDflt | read-create | current | This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before … |
| 1.3.6.1.4.1.629.10.5.1.1.1.12 | ColumndcLmpProductHelloDeadIvlDfltMin | read-create | current | This object specifies the default minimum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMin. This field ca… |
| 1.3.6.1.4.1.629.10.5.1.1.1.13 | ColumndcLmpProductHelloDeadIvlDfltMax | read-create | current | This object specifies the default maximum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMax. This field ca… |
| 1.3.6.1.4.1.629.10.5.1.1.1.14 | ColumndcLmpProductLinkVerifyInterval | read-create | current | This object indicates how often the link verification procedure is executed. This field can be set to zero to disable periodic link verification. |
| 1.3.6.1.4.1.629.10.5.1.1.1.15 | ColumndcLmpProductLnkMismatchNotifEnbl | read-create | current | If this object is true, then it enables the generation of lmpTeLinkPropertyMismatch and lmpDataLinkPropertyMismatch notifications, otherwise these notification… |
| 1.3.6.1.4.1.629.10.5.1.1.1.16 | ColumndcLmpProductUnprotNotifEnable | read-create | current | If this object is true, then it enables the generation of lmpUnprotected notification, otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.629.10.5.1.1.1.17 | ColumndcLmpProductCcUpDownNotifEnable | read-create | current | If this object is true, then it enables the generation of lmpControlChannelUp and lmpControlChannelDown notifications, otherwise these notifications are not em… |
| 1.3.6.1.4.1.629.10.5.1.1.1.18 | ColumndcLmpProductTeLinkNotifEnable | read-create | current | If this object is true, then it enables the generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded notifications, otherwise these notifications are not emitt… |
| 1.3.6.1.4.1.629.10.5.1.1.1.19 | ColumndcLmpProductTelCorrNotifEnable | read-create | current | If this object is true, then it enables the generation of lmpTeLinkCorrelated notification, otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.629.10.5.1.1.1.20 | ColumndcLmpProductDataLinkNotifEnable | read-create | current | If this object is true, then it enables the generation of lmpDataLinkVerificationFailure notifications, otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.629.10.5.1.1.1.21 | ColumndcLmpProductNeighborAutoGen | read-create | current | Denotes whether or not this instance of DC-LMP should automatically generate new entries in the neighbor table for new neighbors discovered during control chan… |
| 1.3.6.1.4.1.629.10.5.1.1.1.22 | ColumndcLmpProductTeLinkAutoLink | read-create | current | Denotes whether or not this instance of DC-LMP should attempt to automatically correlate TE links with neighbor nodes. When this feature is enabled, then durin… |
| 1.3.6.1.4.1.629.10.5.1.1.1.23 | ColumndcLmpProductUniRepeatInterval | read-create | current | The interval in milliseconds between schedulings of UNI Service Discovery. If 0, UNI is not scheduled repeatedly. |
| 1.3.6.1.4.1.629.10.5.1.1.1.24 | ColumndcLmpProductUniCompletionIntval | read-create | current | The maximum allowed time in milliseconds of a UNI Service Discovery exchange. |
| 1.3.6.1.4.1.629.10.5.1.1.1.25 | ColumndcLmpDestIpAddrAsUni | read-create | current | OIF UNI specifies that Config, ConfigAck, ConfigNack and Hello messages be sent to the neighbor's IPCC address (or the All-nodes multicast address in the case … |
| 1.3.6.1.4.1.629.10.5.1.1.1.26 | ColumndcLmpProductRestarted | read-create | current | Flag to indicate whether DC-LMP has restarted following a failure. If this is true, then for a period _LMP_PRODUCT_RESTART_TIME_ after restarting, LinkSummary … |
| 1.3.6.1.4.1.629.10.5.1.1.1.27 | ColumndcLmpProductAdminStatus | read-create | current | The desired administrative state of the LMP entity. |
| 1.3.6.1.4.1.629.10.5.1.1.1.28 | ColumndcLmpProductOperStatus | read-only | current | The current operational state of the LMP entity. |
| 1.3.6.1.4.1.629.10.5.1.1.1.29 | ColumndcLmpProductRowStatus | read-create | current | Used to create and delete an LMP Product Table entry. Note that when this object is set to 'active', the dcLmpProductSocketBufPoolSize and dcLmpProductDLMIBufP… |
| 1.3.6.1.4.1.629.10.5.1.1.1.30 | ColumndcLmpProductWdmMode | read-create | current | This field is now deprecated. WDM is now configured on a per TE Link and Control Channel basis. The lmpTeLinkDwdm and lmpCcWdmMode fields should be used instea… |
| 1.3.6.1.4.1.629.10.5.1.1.1.31 | ColumndcLmpProductWdmRole | read-create | current | Indicates whether this LMP entity can operate in an WDM role and if so whether it should take the role of a peer or optical line system (OLS). |
| 1.3.6.1.4.1.629.10.5.1.1.1.32 | ColumndcLmpSrcIpAddrNodeID | read-create | current | Some LMP implementations use the Node ID as the source IP address in LMP messages. In UNI scenarios this is safe, because the Node ID is drawn from the same ad… |
| 1.3.6.1.4.1.629.10.5.1.1.1.33 | ColumndcLmpProductExtendedHelloDeadIvl | read-create | current | When set to a non-zero value greater than lmpCcHelloDeadIntervalNegotiated, the object overrides the value of lmpCcHelloDeadIntervalNegotiated for a control ch… |
| 1.3.6.1.4.1.629.10.5.1.1.1.34 | ColumnmrvLmpProductTestPort | read-create | current | The if_index of test port for LMP correlation procedure. The test port used as LMP TEST signal injection origin. |
| 1.3.6.1.4.1.629.10.5.1.1.1.35 | ColumnmrvLmpProductTestWavelength | read-create | current | The wavelength of test signal for LMP correlation procedure. |
| 1.3.6.1.4.1.629.10.5.1.1.1.36 | ColumnmrvLmpProductLinkVerifyDeadInterval | read-create | current | This object specifies the VerifyDeadInterval parameter used in the verification of the physical connectivity of data-bearing links. It specifies the observatio… |
| 1.3.6.1.4.1.629.10.5.1.1.1.37 | ColumnmrvLmpProductAttenWithEdfa | read-create | current | The default attenuation level for GMPLS tunnels when programming ROADM channel map for the case when EDFA amplifier is used at the common ROADM port. |
| 1.3.6.1.4.1.629.10.5.1.1.1.38 | ColumnmrvLmpProductAttenWithoutEdfa | read-create | current | The default attenuation level for GMPLS tunnels when programming ROADM channel map for the case when EDFA amplifier isn't used at the common ROADM port. |
| 1.3.6.1.4.1.629.10.5.2 | NodedcLmpConformance | |||
| 1.3.6.1.4.1.629.10.5.2.1 | NodedcLmpGroups | |||
| 1.3.6.1.4.1.629.10.5.2.1.1 | GroupdcLmpProductGroup | current | Collection of objects needed for DC-LMP node configuration. | |
| 1.3.6.1.4.1.629.10.5.2.2 | NodedcLmpCompliances | |||
| 1.3.6.1.4.1.629.10.5.2.2.1 | CompliancedcLmpFullModuleCompliance | current | Compliance statement for agents that support the configuration and monitoring of DC-LMP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcLmpAdminStatus | INTEGER { up(1), down(2) } | current | The desired administrative state of an LMP entity. |
| DcLmpIndex | Unsigned32 | current | The index value identifying an LMP entity. |
| DcLmpOperStatus | INTEGER { up(1), down(2), goingUp(3), goingDown(4), actFailed(5) } | current | The current operational state of an LMP entity. |