DC-OAM-MPLS-MP-MIB
19 objects
The MIB module for management of MPLS MPs.
Imported Objects
| DC-MASTER-TC | AdminStatus BaseOperStatus NumericIndex |
| DC-OAMM-MIB | oammEntApplIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.16 | IdentitymplsMpMib | The MIB module for management of MPLS MPs. | ||
| 1.3.6.1.4.1.629.10.16.1 | NodemplsMpObjects | |||
| 1.3.6.1.4.1.629.10.16.1.2 | TablemplsMpTable | not-accessible | current | MPLS Maintenance Point (MP) MIB. |
| 1.3.6.1.4.1.629.10.16.1.2.1 | RowmplsMpEntry | not-accessible | current | Each entry represents a Maintenance Point (MP). |
| 1.3.6.1.4.1.629.10.16.1.2.1.1 | ColumnmplsMpIndex | not-accessible | current | This index is used to uniquely identify the Maintenance Point (MP). This is the interface index for the Maintenance Point. |
| 1.3.6.1.4.1.629.10.16.1.2.1.2 | ColumnmplsMpRowStatus | read-create | current | Used to create and delete an MPLS MP Table entry. |
| 1.3.6.1.4.1.629.10.16.1.2.1.3 | ColumnmplsMpAdminStatus | read-create | current | The desired administrative state of the Maintenance Point. |
| 1.3.6.1.4.1.629.10.16.1.2.1.4 | ColumnmplsMpOperStatus | read-only | current | The current operational state of the Maintenance Point. Note that a Maintenance Point can only be operationally up if the DC-OAM Entity is operationally up. |
| 1.3.6.1.4.1.629.10.16.1.2.1.5 | ColumnmplsMpProactiveBfdContCheck | read-create | current | Proactive BFD Continuity Check (CC) OAM function should be enabled for this MP. |
| 1.3.6.1.4.1.629.10.16.1.2.1.6 | ColumnmplsMpProactiveBfdConnVerif | read-create | current | BFD Connectivity Verification (CV) OAM function should be enabled for this MP. |
| 1.3.6.1.4.1.629.10.16.1.2.1.100 | ColumnmplsMpLoopback | read-create | current | This MP should be put into loopback mode at this node. |
| 1.3.6.1.4.1.629.10.16.2 | NodemplsMpConformance | |||
| 1.3.6.1.4.1.629.10.16.2.1 | NodemplsMpGroups | |||
| 1.3.6.1.4.1.629.10.16.2.1.1 | GroupmplsMpGeneralGroup | current | Objects that apply to all MPLS MP MIB implementations. | |
| 1.3.6.1.4.1.629.10.16.2.2 | NodemplsMpCompliances | |||
| 1.3.6.1.4.1.629.10.16.2.2.1 | CompliancemplsMpModuleFullCompliance | current | The Module is implemented with support for read-create. In other words, both monitoring and configuration are available when using this MODULE-COMPLIANCE. | |
| 1.3.6.1.4.1.629.10.16.2.2.2 | CompliancemplsMpModuleReadOnlyCompliance | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |