DC-OSPF-MIB
984 objects
The MIB module for management of the DC-OSPF product, including the E-NNI Routing function.
Imported Objects
| DC-MASTER-TC | AuthUserDataString IfOperStatus IgpShortcutMetricType NpgOperStatus NumericIndex |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.3 | IdentityospfMib | The MIB module for management of the DC-OSPF product, including the E-NNI Routing function. | ||
| 1.3.6.1.4.1.629.10.3.1 | NodeospfObjects | |||
| 1.3.6.1.4.1.629.10.3.1.1 | TableospfPmEntTable | not-accessible | current | The table of OSPF entities. |
| 1.3.6.1.4.1.629.10.3.1.1.1 | RowospfPmEntEntry | not-accessible | current | Each entry represents an instance of the OSPF Protocol Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.1.1.1 | ColumnospfPmEntRouterId | read-write | current | The configured Router ID. This is a 32-bit integer uniquely identifying the router in the Autonomous System. For example, it is usually set to the smallest IP … |
| 1.3.6.1.4.1.629.10.3.1.1.1.2 | ColumnospfPmEntAdminStat | read-create | current | The desired administrative state of the OSPF Protocol Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.1.1.3 | ColumnospfPmEntVersionNumber | read-only | current | The current version number of the OSPF protocol is 2. |
| 1.3.6.1.4.1.629.10.3.1.1.1.4 | ColumnospfPmEntAreaBdrRtrStatus | read-only | current | A flag to note whether this router is an area border router. |
| 1.3.6.1.4.1.629.10.3.1.1.1.5 | ColumnospfPmEntASBdrRtrStatus | read-write | current | A flag to note whether this router is configured as an Autonomous System border router. |
| 1.3.6.1.4.1.629.10.3.1.1.1.6 | ColumnospfPmEntExternLsaCount | read-only | current | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.629.10.3.1.1.1.7 | ColumnospfPmEntExternLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.4.1.629.10.3.1.1.1.8 | ColumnospfPmEntTOSSupport | read-write | current | The router's support for type-of-service routing. |
| 1.3.6.1.4.1.629.10.3.1.1.1.9 | ColumnospfPmEntOriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. It includes all or… |
| 1.3.6.1.4.1.629.10.3.1.1.1.10 | ColumnospfPmEntRxNewLsas | read-only | current | The number of link-state advertisements received determined to be new instances. This number does not include newer instances of self-originated link-state adv… |
| 1.3.6.1.4.1.629.10.3.1.1.1.11 | ColumnospfPmEntExtLsdbLimit | read-write | current | We do not currently support the Database Overflow extension, so the setting of this parameter is ignored. It specifies the maximum number of non-default AS-ext… |
| 1.3.6.1.4.1.629.10.3.1.1.1.12 | ColumnospfPmEntMulticastExtns | read-write | current | We do not currently support Multicast Extensions, so the setting of this parameter is ignored. A Bit Mask indicating whether the router is forwarding IP multic… |
| 1.3.6.1.4.1.629.10.3.1.1.1.13 | ColumnospfPmEntExitOverflowIntvl | read-write | current | We do not currently support the Database Overflow extension, so the setting of this parameter is ignored. It specifies the number of seconds that, after enteri… |
| 1.3.6.1.4.1.629.10.3.1.1.1.14 | ColumnospfPmEntDemandExtensions | read-write | current | We do not currently support demand routing, so the setting of this parameter is ignored. |
| 1.3.6.1.4.1.629.10.3.1.1.1.15 | ColumnospfPmEntRFC1583Comp | read-write | current | Indicates metrics used to choose among multiple AS-external-LSAs. When RFC1583Compatibility is set to true, only cost will be used when choosing among multiple… |
| 1.3.6.1.4.1.629.10.3.1.1.1.16 | ColumnospfPmEntOpaqueLsaSupport | read-write | current | The router's support for Opaque LSA types. This value cannot be changed when the Entity MIB is active and in oper state up. |
| 1.3.6.1.4.1.629.10.3.1.1.1.17 | ColumnospfPmEntTrafficEngSupport | read-write | current | The router's support for OSPF traffic engineering. This value cannot be changed when the Entity MIB is active and in oper state up. |
| 1.3.6.1.4.1.629.10.3.1.1.1.18 | ColumnospfPmEntIndex | not-accessible | current | The index of this ospfPmEntEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.3.6.1.4.1.629.10.3.1.1.1.19 | ColumnospfPmEntOperStatus | read-only | current | The current operational state of the OSPF Protocol Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.1.1.20 | ColumnospfPmEntRowStatus | read-create | current | Used to create and delete an OSPF Protocol Manager Entity Table entry. Note that when this object is set to 'active', the ospfPmEntRouterId object in the row m… |
| 1.3.6.1.4.1.629.10.3.1.1.1.21 | ColumnospfPmEntCalcMaxDelay | read-write | current | The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of … |
| 1.3.6.1.4.1.629.10.3.1.1.1.22 | ColumnospfPmEntCalcThrshUpdStart | read-write | current | This parameter can be used to override the above routing calculation delay when the number of updates to the Link State Database reaches a threshold value. Thi… |
| 1.3.6.1.4.1.629.10.3.1.1.1.23 | ColumnospfPmEntCalcThrshUpdRestart | read-write | current | This parameter can be used to interrupt a full routing calculation when the number of pending updates to the Link State Database has reached a threshold value.… |
| 1.3.6.1.4.1.629.10.3.1.1.1.24 | ColumnospfPmEntCalcThrshIncUpdates | read-write | current | This parameter can be used to optimize the performance of the Routing Calculator in the situation where updates that are pending to the Link State Database sol… |
| 1.3.6.1.4.1.629.10.3.1.1.1.25 | ColumnospfPmEntCalcThrshIncSpfUpd | read-write | current | This parameter can be used to optimize the performance of the Routing Calculator in the situation where updates that are pending to the Link State Database con… |
| 1.3.6.1.4.1.629.10.3.1.1.1.26 | ColumnospfPmEntCalcPauseFreq | read-write | current | This value determines how regularly a Routing Calculation is paused. It is measured in points. The points scale roughly maps to a time scale, so that the large… |
| 1.3.6.1.4.1.629.10.3.1.1.1.27 | ColumnospfPmEntRteMaxEqCostPaths | read-write | current | The maximum number of equal cost paths that are stored for each destination in the Routing Table. Note that, when IGP shortcut interfaces are in use, this maxi… |
| 1.3.6.1.4.1.629.10.3.1.1.1.28 | ColumnospfPmEntCheckAge | read-write | current | This value determines how often the checksums of LSAs in the Link State Database are checked. If 0, no checksums in the database are checked. |
| 1.3.6.1.4.1.629.10.3.1.1.1.29 | ColumnospfPmEntExtLsaRfshIntvl | read-write | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.629.10.3.1.1.1.30 | ColumnospfPmEntExtOpLsaCount | read-only | current | The number of type-11 LSAs in the external database. |
| 1.3.6.1.4.1.629.10.3.1.1.1.31 | ColumnospfPmEntExtOpLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all type-11 LSAs in the external Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.1.1.32 | ColumnospfPmEntNumUpdPending | read-only | current | The number of updates that are pending addition to the Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.1.1.33 | ColumnospfPmEntNumUpdMerged | read-only | current | The number of updates that have been merged into the Link State Database since the last routing calculation. |
| 1.3.6.1.4.1.629.10.3.1.1.1.34 | ColumnospfPmEntNumCksumsPending | read-only | current | The number of LSAs in the Link State Database which are now due to have their checksum checked. |
| 1.3.6.1.4.1.629.10.3.1.1.1.35 | ColumnospfPmEntDoGraceHitless | read-write | current | Indicates whether DC-OSPF should perform hitless restart using grace LSAs. If DC-OSPF is being deactivated, grace LSAs are sent out to inform neighboring route… |
| 1.3.6.1.4.1.629.10.3.1.1.1.36 | ColumnospfPmEntDoGraceUnplannedHitless | read-write | current | Indicates whether DC-OSPF should perform an unplanned hitless restart using grace LSAs. Note that DoGraceHitless has a higher priority to DoGraceUnplannedHitle… |
| 1.3.6.1.4.1.629.10.3.1.1.1.37 | ColumnospfPmEntHitlessGracePeriod | read-write | current | If DC-OSPF is attempting to undergo a hitless restart, this field specifies the length of grace period that should be requested from adjacent routers in grace … |
| 1.3.6.1.4.1.629.10.3.1.1.1.38 | ColumnospfPmEntHitlessRestartReason | read-write | current | If DC-OSPF is attempting to undergo a planned hitless restart, this field specifies the reason for the restart. This reason is passed to adjacent neighbors in … |
| 1.3.6.1.4.1.629.10.3.1.1.1.39 | ColumnospfPmEntTERouterId | read-write | current | The configured Traffic Engineering router ID. The TE Router ID is a router ID which is also a routable IP address. If this field is set to the default value of… |
| 1.3.6.1.4.1.629.10.3.1.1.1.40 | ColumnospfPmEntPrivateData | read-create | current | This object contains the customer defined private data associated with the router. Any private data supplied is stored and may be used to build user defined op… |
| 1.3.6.1.4.1.629.10.3.1.1.1.41 | ColumnospfPmEntSupportEnniRouting | read-create | current | The router's support for the OIF E-NNI Routing 2.0 protocol. When set to true, the router supports ONLY the OIF variant of the OSPF protocol. This value cannot… |
| 1.3.6.1.4.1.629.10.3.1.1.1.42 | ColumnospfPmEntRestartStatus | read-only | current | Current status of OSPF hitless restart. |
| 1.3.6.1.4.1.629.10.3.1.1.1.43 | ColumnospfPmEntRestartAge | read-only | current | Remaining time in current OSPF hitless restart interval. |
| 1.3.6.1.4.1.629.10.3.1.1.1.44 | ColumnospfPmEntRestartExitReason | read-only | current | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a rest… |
| 1.3.6.1.4.1.629.10.3.1.1.1.45 | ColumnospfPmEntCurrentRouterId | read-only | current | The currently in-use Router ID. This field displays the Router ID in use by DC-OSPF. The field ospfPmEntRouterId is used to configure this value. |
| 1.3.6.1.4.1.629.10.3.1.1.1.46 | ColumnospfPmEntCurrentTERouterId | read-only | current | The currently in-use Traffic Engineering Router ID. This field displays the TE Router ID in use by DC-OSPF. The field ospfPmEntTERouterId is used to configure … |
| 1.3.6.1.4.1.629.10.3.1.1.1.47 | ColumnospfPmEntCalcSoonAfterIfChng | read-create | current | Set this object to 'true' to ensure that a routing calculation is started immediately after the configuration of a local interface changes such that a new rout… |
| 1.3.6.1.4.1.629.10.3.1.1.1.48 | ColumnospfPmEntI3EntIndex | read-create | current | Identifies the I3 Interface routing stub entity. The OSPF PM cannot be 'up' without a successful join to an I3 stub. The status of the join is given by the row… |
| 1.3.6.1.4.1.629.10.3.1.1.1.49 | ColumnospfPmEntEnableIgpShortcut | read-create | current | Set ospfPmEntEnableIgpShortcut to 'true' to enable OSPF routing over IGP shortcut interfaces. ospfPmEntEnableIgpShortcut to 'false' to disable OSPF routing ove… |
| 1.3.6.1.4.1.629.10.3.1.1.1.50 | ColumnospfPmEntVpnPeCeSupport | read-create | current | The router's support for protocol extensions that facilitate use of OSPF between provider edge (PE) routers and customer edge (CE) routers in a BGP/MPLS IP VPN… |
| 1.3.6.1.4.1.629.10.3.1.1.1.51 | ColumnospfPmEntVpnRouteTag | read-create | current | The VPN route tag used for loop detection as part of OSPF PE-CE protocol function. This field is only used if ospfPmEntVpnPeCeSupport is true. If this field is… |
| 1.3.6.1.4.1.629.10.3.1.1.1.52 | ColumnospfPmEntVpnRouterIdAttr | read-create | current | Indicates whether to add an OSPF Router ID attribute when exporting an OSPF route as a BGP/MPLS VPN route. OSPF Router ID attributes are specified in RFC 4577.… |
| 1.3.6.1.4.1.629.10.3.1.1.1.53 | ColumnospfPmEntDfltExtType1Metric | read-create | current | The default type 1 metric to use for external routes received from RTM with unspecified path cost. |
| 1.3.6.1.4.1.629.10.3.1.1.1.54 | ColumnospfPmEntDfltExtType2Metric | read-create | current | The default type 2 metric to use for external routes received from RTM with unspecified path cost. |
| 1.3.6.1.4.1.629.10.3.1.1.1.55 | ColumnospfPmEntRtmPurgeTime | read-create | current | This object defines the maximum time that DC-OSPF will wait when a Routing Table Manager (such as DC-RTM) fails before purging routes. In some systems, the Rou… |
| 1.3.6.1.4.1.629.10.3.1.1.1.56 | ColumnospfPmEntMinLsInterval | read-create | current | The minimum time, in milliseconds, between distinct originations of any particular LSA. A value of zero means that there is no minimum time between distinct re… |
| 1.3.6.1.4.1.629.10.3.1.1.1.57 | ColumnospfPmEntMinLsArrival | read-create | current | For any particular LSA, the minimum time in milliseconds that must elapse between reception of new LSA instances during flooding. LSA instances received at hig… |
| 1.3.6.1.4.1.629.10.3.1.1.1.58 | ColumnospfPmEntVpnDfltShamLinkMetric | read-create | current | The default metric for sham links. |
| 1.3.6.1.4.1.629.10.3.1.1.1.59 | ColumnospfPmEntInstanceId | read-create | current | The OSPF instance id. This field allows multiple OSPFv2 protocol instances to be supported on the same subnet. - All OSPFv2 protocol packets sent by this OSPFv… |
| 1.3.6.1.4.1.629.10.3.1.1.1.60 | ColumnospfPmEntStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfPmEntStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.1.1.61 | ColumnospfPmEntEnableTrapSupport | read-create | current | Set this object to 'true' to enable trap support in DC-OSPF-PM. When this field is set to 'true', DC-OSPF-PM will generate traps for the events listed under AM… |
| 1.3.6.1.4.1.629.10.3.1.2 | TableospfPmAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.629.10.3.1.2.1 | RowospfPmAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.629.10.3.1.2.1.1 | ColumnospfPmAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.629.10.3.1.2.1.2 | ColumnospfPmAuthType | read-create | obsolete | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.4.1.629.10.3.1.2.1.3 | ColumnospfPmImportAsExtern | read-create | current | Indicates whether an area is a Stub area, NSSA, or standard area. Type-5 AS-External LSAs and Type-11 Opaque LSAs are not imported into Stub Areas or NSSAs. NS… |
| 1.3.6.1.4.1.629.10.3.1.2.1.4 | ColumnospfPmSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.629.10.3.1.2.1.5 | ColumnospfPmAreaBdrRtrCount | read-only | current | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.629.10.3.1.2.1.6 | ColumnospfPmASBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.629.10.3.1.2.1.7 | ColumnospfPmAreaLsaCount | read-only | current | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.4.1.629.10.3.1.2.1.8 | ColumnospfPmAreaLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) lin… |
| 1.3.6.1.4.1.629.10.3.1.2.1.9 | ColumnospfPmAreaSummary | read-create | current | The variable ospfPmAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the route… |
| 1.3.6.1.4.1.629.10.3.1.2.1.10 | ColumnospfPmAreaStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.2.1.11 | ColumnospfPmAreaNssaTranslatorRole | read-create | current | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| 1.3.6.1.4.1.629.10.3.1.2.1.12 | ColumnospfPmAreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object set to enabled, the NSSA Border rou… |
| 1.3.6.1.4.1.629.10.3.1.2.1.13 | ColumnospfPmAreaNssaTranStabIntvl | read-create | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.629.10.3.1.2.1.14 | ColumnospfPmAreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| 1.3.6.1.4.1.629.10.3.1.2.1.15 | ColumnospfPmAreaApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.2.1.16 | ColumnospfPmAreaAdminStatus | read-create | current | The desired administrative state of this OSPF area. |
| 1.3.6.1.4.1.629.10.3.1.2.1.17 | ColumnospfPmAreaOperStatus | read-only | current | The current operational state of this OSPF area. |
| 1.3.6.1.4.1.629.10.3.1.2.1.18 | ColumnospfPmAreaTransitCapability | read-only | current | This parameter indicates whether the area can carry data traffic that neither originates nor terminates in the area itself. This parameter is calculated when t… |
| 1.3.6.1.4.1.629.10.3.1.2.1.19 | ColumnospfPmAreaLsaRfshIntvl | read-write | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.629.10.3.1.2.1.20 | ColumnospfPmAreaRtrLsaCount | read-only | current | The number of LSAs with LS type-1 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.21 | ColumnospfPmAreaRtrLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-1 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.22 | ColumnospfPmAreaNetLsaCount | read-only | current | The number of LSAs with LS type-2 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.23 | ColumnospfPmAreaNetLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-2 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.24 | ColumnospfPmAreaSummLsaCount | read-only | current | The number of LSAs with LS type-3 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.25 | ColumnospfPmAreaSummLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-3 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.26 | ColumnospfPmAreaSummAsLsaCount | read-only | current | The number of LSAs with LS type-4 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.27 | ColumnospfPmAreaSummAsLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-4 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.28 | ColumnospfPmAreaNssaLsaCount | read-only | current | The number of LSAs with LS type-7 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.29 | ColumnospfPmAreaNssaLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-7 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.30 | ColumnospfPmAreaOpLsaCount | read-only | current | The number of LSAs with LS type-10 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.31 | ColumnospfPmAreaOpLsaCksumSum | read-only | current | The 32 bit sum of LS checksums of all LSAs with LS type-10 in this area's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.2.1.32 | ColumnospfPmAreaNssaNoExtRedist | read-create | current | This parameter indicates whether this router should originate NSSA LSAs into this area for external routes: if set to AMB_TRUE, this router will suppress NSSA … |
| 1.3.6.1.4.1.629.10.3.1.3 | TableospfPmStubAreaTable | not-accessible | current | The set of metrics that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.4.1.629.10.3.1.3.1 | RowospfPmStubAreaEntry | not-accessible | current | The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.4.1.629.10.3.1.3.1.1 | ColumnospfPmStubAreaId | not-accessible | current | The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance. |
| 1.3.6.1.4.1.629.10.3.1.3.1.2 | ColumnospfPmStubTOS | not-accessible | current | The Type of Service associated with the metric. Since DC-OSPF does not support type of service, TOS must be set to zero. |
| 1.3.6.1.4.1.629.10.3.1.3.1.3 | ColumnospfPmStubMetric | read-create | current | The metric value applied at the indicated type of service. The default value for this MIB field is 1. However, if there is no ospfPmStubAreaTable row for a giv… |
| 1.3.6.1.4.1.629.10.3.1.3.1.4 | ColumnospfPmStubStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.3.1.5 | ColumnospfPmStubMetricType | read-create | current | This variable displays the type of metric advertised as a default route. |
| 1.3.6.1.4.1.629.10.3.1.3.1.6 | ColumnospfPmStubApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.4 | TableospfPmLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.629.10.3.1.4.1 | RowospfPmLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.4.1.1 | ColumnospfPmLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.629.10.3.1.4.1.2 | ColumnospfPmLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.4.1.3 | ColumnospfPmLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.629.10.3.1.4.1.4 | ColumnospfPmLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.4.1.5 | ColumnospfPmLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.4.1.6 | ColumnospfPmLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.4.1.7 | ColumnospfPmLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.4.1.8 | ColumnospfPmLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.4.1.9 | ColumnospfPmLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.6 | TableospfPmHostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.629.10.3.1.6.1 | RowospfPmHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.4.1.629.10.3.1.6.1.1 | ColumnospfPmHostIpAddress | not-accessible | current | The IP Address of the Host. |
| 1.3.6.1.4.1.629.10.3.1.6.1.2 | ColumnospfPmHostTOS | not-accessible | current | The Type of Service of the route being configured. |
| 1.3.6.1.4.1.629.10.3.1.6.1.3 | ColumnospfPmHostMetric | read-create | current | The Metric to be advertised. |
| 1.3.6.1.4.1.629.10.3.1.6.1.4 | ColumnospfPmHostStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.6.1.5 | ColumnospfPmHostAreaID | read-create | current | The Area the Host Entry is to be found within. |
| 1.3.6.1.4.1.629.10.3.1.6.1.6 | ColumnospfPmHostApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.6.1.7 | ColumnospfPmHostAdminStatus | read-create | current | The desired administrative state of this host. |
| 1.3.6.1.4.1.629.10.3.1.6.1.8 | ColumnospfPmHostOperStatus | read-only | current | The current operational state of this host. |
| 1.3.6.1.4.1.629.10.3.1.7 | TableospfPmIfTable | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. This table has been updated to include DC-OSPF implementation specific fields. Th… |
| 1.3.6.1.4.1.629.10.3.1.7.1 | RowospfPmIfEntry | not-accessible | current | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. This entry has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.7.1.1 | ColumnospfPmIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.2 | ColumnospfPmAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and address less interfaces; This variable takes the value 0 on interfaces with IP Addresses, and a non-z… |
| 1.3.6.1.4.1.629.10.3.1.7.1.3 | ColumnospfPmIfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. This field cannot be changed if … |
| 1.3.6.1.4.1.629.10.3.1.7.1.4 | ColumnospfPmIfType | read-write | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.4.1.629.10.3.1.7.1.5 | ColumnospfPmIfAdminStat | read-create | current | The OSPF interface's administrative status. The value of this field indicates whether the OSPF protocol will be run over this interface and whether this interf… |
| 1.3.6.1.4.1.629.10.3.1.7.1.6 | ColumnospfPmIfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.629.10.3.1.7.1.7 | ColumnospfPmIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.8 | ColumnospfPmIfRetransInterval | read-create | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.629.10.3.1.7.1.9 | ColumnospfPmIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.629.10.3.1.7.1.10 | ColumnospfPmIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.629.10.3.1.7.1.11 | ColumnospfPmIfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.4.1.629.10.3.1.7.1.12 | ColumnospfPmIfState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.4.1.629.10.3.1.7.1.13 | ColumnospfPmIfDesignatedRouter | read-only | current | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.629.10.3.1.7.1.14 | ColumnospfPmIfBackupDesignatedRouter | read-only | current | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.629.10.3.1.7.1.15 | ColumnospfPmIfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.7.1.16 | ColumnospfPmIfAuthKey | read-create | current | The cleartext password used as an OSPF Authentication key when simplePassword security is enabled. This object does not access any OSPF Cryptogaphic (e.g. MD5)… |
| 1.3.6.1.4.1.629.10.3.1.7.1.17 | ColumnospfPmIfStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.7.1.18 | ColumnospfPmIfMulticastForwarding | read-create | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicas… |
| 1.3.6.1.4.1.629.10.3.1.7.1.19 | ColumnospfPmIfDemand | read-create | current | We do not currently support the OSPF demand extension, so the setting of this parameter is ignored. It indicates whether Demand OSPF procedures (HELLO suppress… |
| 1.3.6.1.4.1.629.10.3.1.7.1.20 | ColumnospfPmIfAuthType | read-create | current | The authentication type specified for an interface. Additional authentication types may be assigned locally. Note that this object can be used to engage in sig… |
| 1.3.6.1.4.1.629.10.3.1.7.1.21 | ColumnospfPmIfLsaCount | read-only | current | The total number of link-local link state advertisements in this interface's link-local link state database. |
| 1.3.6.1.4.1.629.10.3.1.7.1.22 | ColumnospfPmIfLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to det… |
| 1.3.6.1.4.1.629.10.3.1.7.1.23 | ColumnospfPmIfApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.7.1.24 | ColumnospfPmIfOperStatus | read-only | current | The current operational state of this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.25 | ColumnospfPmIfNetMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.629.10.3.1.7.1.26 | ColumnospfPmIfResourceClass | read-only | current | This field specifies administrative group membership for this interface, in terms of a bit mask. An interface that is a member of multiple groups will have mul… |
| 1.3.6.1.4.1.629.10.3.1.7.1.27 | ColumnospfPmIfTransmitTimerDelay | read-write | current | The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic.… |
| 1.3.6.1.4.1.629.10.3.1.7.1.28 | ColumnospfPmIfIPMaxPacketSize | read-only | current | Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes… |
| 1.3.6.1.4.1.629.10.3.1.7.1.29 | ColumnospfPmIfPassive | read-write | current | Indicates whether this interface is a passive interface. If set to true, we suppress HELLO packets sent on and received from this interface. We will therefore … |
| 1.3.6.1.4.1.629.10.3.1.7.1.30 | ColumnospfPmIfInterfaceName | read-only | current | The textual name of the interface. The value of this object is the name of the interface as assigned by the local device and is suitable for use in commands en… |
| 1.3.6.1.4.1.629.10.3.1.7.1.31 | ColumnospfPmIfLsaRefreshIntvl | read-write | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.629.10.3.1.7.1.32 | ColumnospfPmIfQOSSupport | read-write | current | Defines whether Traffic Engineering LSAs can be originated for this interface. Traffic Engineering information to advertise must be supplied by the I3 Stub. |
| 1.3.6.1.4.1.629.10.3.1.7.1.33 | ColumnospfPmIfTEMetricPcntge | read-write | current | The Traffic Engineering metric (ospfPmIfTEMetric) is updated in real-time by the External IF Config Stub. In order to increase performance and reduce network t… |
| 1.3.6.1.4.1.629.10.3.1.7.1.34 | ColumnospfPmIfTEMetric | read-only | current | The Traffic Engineering metric for this interface, used by CSPF to calculate constrained routes. This is advertised through the routing domain in Opaque LSAs. … |
| 1.3.6.1.4.1.629.10.3.1.7.1.35 | ColumnospfPmIfLastTEMetric | read-only | current | The last advertised Traffic Engineering metric for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.36 | ColumnospfPmIfMaxBwidthPcntge | read-write | current | The maximum bandwidth on this interface (ospfPmIfMaxBandwidth) is updated in real-time by the External IF Config Stub. In order to increase performance and red… |
| 1.3.6.1.4.1.629.10.3.1.7.1.37 | ColumnospfPmIfMaxBandwidth | read-only | current | The maximum bandwidth on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. This is the true link capacity. The units… |
| 1.3.6.1.4.1.629.10.3.1.7.1.38 | ColumnospfPmIfLastMaxBwidth | read-only | current | The last advertised Maximum Bandwidth for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.39 | ColumnospfPmIfMaxResBwidthPcntge | read-write | current | The maximum reservable bandwidth on this interface (ospfPmIfMaxResBwidth) is updated in real-time by the External IF Config Stub. In order to increase performa… |
| 1.3.6.1.4.1.629.10.3.1.7.1.40 | ColumnospfPmIfMaxResBwidth | read-only | current | The maximum reservable bandwidth on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. This is the true link capacity… |
| 1.3.6.1.4.1.629.10.3.1.7.1.41 | ColumnospfPmIfLastMaxResBwidth | read-only | current | The last advertised Maximum Reserved Bandwidth for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.42 | ColumnospfPmIfUnresBwidthPcntge | read-write | current | The unreserved bandwidth on this interface (ospfPmIfUnresBwidth0, .. 7) is updated in real-time by the External IF Config Stub. In order to increase performanc… |
| 1.3.6.1.4.1.629.10.3.1.7.1.43 | ColumnospfPmIfUnresBwidth0 | read-only | current | The unreserved bandwidth on this interface, at the first priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained route… |
| 1.3.6.1.4.1.629.10.3.1.7.1.44 | ColumnospfPmIfLastUnresBwidth0 | read-only | current | The last advertised Unreserved Bandwidth at the first priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.45 | ColumnospfPmIfUnresBwidth1 | read-only | current | The unreserved bandwidth on this interface, at the second priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained rout… |
| 1.3.6.1.4.1.629.10.3.1.7.1.46 | ColumnospfPmIfLastUnresBwidth1 | read-only | current | The last advertised Unreserved Bandwidth at the second priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.47 | ColumnospfPmIfUnresBwidth2 | read-only | current | The unreserved bandwidth on this interface, at the third priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained route… |
| 1.3.6.1.4.1.629.10.3.1.7.1.48 | ColumnospfPmIfLastUnresBwidth2 | read-only | current | The last advertised Unreserved Bandwidth at the third priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.49 | ColumnospfPmIfUnresBwidth3 | read-only | current | The unreserved bandwidth on this interface, at the fourth priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained rout… |
| 1.3.6.1.4.1.629.10.3.1.7.1.50 | ColumnospfPmIfLastUnresBwidth3 | read-only | current | The last advertised Unreserved Bandwidth at the fourth priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.51 | ColumnospfPmIfUnresBwidth4 | read-only | current | The unreserved bandwidth on this interface, at the fifth priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained route… |
| 1.3.6.1.4.1.629.10.3.1.7.1.52 | ColumnospfPmIfLastUnresBwidth4 | read-only | current | The last advertised Unreserved Bandwidth at the fifth priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.53 | ColumnospfPmIfUnresBwidth5 | read-only | current | The unreserved bandwidth on this interface, at the sixth priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained route… |
| 1.3.6.1.4.1.629.10.3.1.7.1.54 | ColumnospfPmIfLastUnresBwidth5 | read-only | current | The last advertised Unreserved Bandwidth at the sixth priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.55 | ColumnospfPmIfUnresBwidth6 | read-only | current | The unreserved bandwidth on this interface, at the seventh priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained rou… |
| 1.3.6.1.4.1.629.10.3.1.7.1.56 | ColumnospfPmIfLastUnresBwidth6 | read-only | current | The last advertised Unreserved Bandwidth at the seventh priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.57 | ColumnospfPmIfUnresBwidth7 | read-only | current | The unreserved bandwidth on this interface, at the eighth priority level or TE-class, in IEEE floating point format, used by CSPF to calculate constrained rout… |
| 1.3.6.1.4.1.629.10.3.1.7.1.58 | ColumnospfPmIfLastUnresBwidth7 | read-only | current | The last advertised Unreserved Bandwidth at the eighth priority level or TE-class for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.59 | ColumnospfPmIfIfIndex | read-only | current | A 32-bit index identifying this interface, or zero if no index value is known. For interfaces having no IP Address this field is automatically set to the value… |
| 1.3.6.1.4.1.629.10.3.1.7.1.60 | ColumnospfPmIfRemoteIfIndex | read-only | current | For a point to point interface, this specifies the interface index assigned to this link by the remote peer. If the remote interface ID is not known, this fiel… |
| 1.3.6.1.4.1.629.10.3.1.7.1.61 | ColumnospfPmIfLinkProtectionType | read-only | current | The protection capability that exists for this interface. |
| 1.3.6.1.4.1.629.10.3.1.7.1.62 | ColumnospfPmIfSRLG | read-only | current | An Octet String indicating the Shared Risk Link Groups (SRLGs) that links on this interface belong to. Links belong to the same SRLG if they share the same ris… |
| 1.3.6.1.4.1.629.10.3.1.7.1.63 | ColumnospfPmIfMaxLSPBwidthPcntge | read-write | current | The MAX LSP bandwidth for the various switching descriptors on this interface (ospfPmIfSwitchMaxLSPBwidth0, .. 7) is updated in real-time by the External IF Co… |
| 1.3.6.1.4.1.629.10.3.1.7.1.64 | ColumnospfPmIfMinLSPBwidthPcntge | read-write | current | The Min LSP bandwidth for the various switching descriptors on this interface is updated in real-time by the External IF Config Stub. In order to increase perf… |
| 1.3.6.1.4.1.629.10.3.1.7.1.65 | ColumnospfPmIfMTUSizePcntge | read-write | current | The Maximum Transmission Unit size for the various switching descriptors on this interface is updated in real-time by the External IF Config Stub. In order to … |
| 1.3.6.1.4.1.629.10.3.1.7.1.66 | ColumnospfPmIfHelperModePolicy | read-write | current | Indicates whether DC-OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each o… |
| 1.3.6.1.4.1.629.10.3.1.7.1.67 | ColumnospfPmIfMaxHitlessGracePeriod | read-write | current | If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighbor… |
| 1.3.6.1.4.1.629.10.3.1.7.1.68 | ColumnospfPmIfEnableTeFlooding | read-write | current | Used to enable TE LSA flooding across this interface. This allows the TE data network to be partitioned separately from the underlying OSPF control plane netwo… |
| 1.3.6.1.4.1.629.10.3.1.7.1.69 | ColumnospfPmIfAuthUserData | read-create | current | Authentication user data for interface level authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to as… |
| 1.3.6.1.4.1.629.10.3.1.7.1.70 | ColumnospfPmIfFastHelloMultiplier | read-create | current | The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached… |
| 1.3.6.1.4.1.629.10.3.1.7.1.71 | ColumnospfPmIfAutoDeleteNbr | read-create | current | Whether dynamically created entries in the ospfPmNbrTable should be kept when the adjacency goes down. The default value is 'true', which indicates that dynami… |
| 1.3.6.1.4.1.629.10.3.1.7.1.72 | ColumnospfPmIfNumBwidthCnstrnts | read-only | current | The number of valid bandwidth constraints, starting from ospfPmIfBwidthCnstrnt0. In a non Diffserv-TE environment, this object will be set to 0. |
| 1.3.6.1.4.1.629.10.3.1.7.1.73 | ColumnospfPmIfBwidthCnstrntModel | read-only | current | The Bandwidth Constraints Model Identifier, from the name space managed by IANA - see RFC 4124. If DC-OSPF is flooding a Bandwidth Constraints sub-TLV for this… |
| 1.3.6.1.4.1.629.10.3.1.7.1.74 | ColumnospfPmIfBwidthCnstrnt0 | read-only | current | The first bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or … |
| 1.3.6.1.4.1.629.10.3.1.7.1.75 | ColumnospfPmIfBwidthCnstrnt1 | read-only | current | The second bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or… |
| 1.3.6.1.4.1.629.10.3.1.7.1.76 | ColumnospfPmIfBwidthCnstrnt2 | read-only | current | The third bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or … |
| 1.3.6.1.4.1.629.10.3.1.7.1.77 | ColumnospfPmIfBwidthCnstrnt3 | read-only | current | The fourth bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or… |
| 1.3.6.1.4.1.629.10.3.1.7.1.78 | ColumnospfPmIfBwidthCnstrnt4 | read-only | current | The fifth bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or … |
| 1.3.6.1.4.1.629.10.3.1.7.1.79 | ColumnospfPmIfBwidthCnstrnt5 | read-only | current | The sixth bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or … |
| 1.3.6.1.4.1.629.10.3.1.7.1.80 | ColumnospfPmIfBwidthCnstrnt6 | read-only | current | The seventh bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than o… |
| 1.3.6.1.4.1.629.10.3.1.7.1.81 | ColumnospfPmIfBwidthCnstrnt7 | read-only | current | The eighth bandwidth constraint on this interface, in IEEE floating point format, used by CSPF to calculate constrained routes. Each value will be less than or… |
| 1.3.6.1.4.1.629.10.3.1.7.1.82 | ColumnospfPmIfMtuIgnore | read-write | current | This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description pac… |
| 1.3.6.1.4.1.629.10.3.1.7.1.83 | ColumnospfPmIfNmEntity | read-create | current | Identifies the NM entity that will handle this interface. This field cannot be changed if the row is admin status up and row status active. |
| 1.3.6.1.4.1.629.10.3.1.7.1.84 | ColumnospfPmIfBfdDesired | read-create | current | Indicates whether Bidirectional Forwarding Detection (BFD) is desired on this interface. If the NM entity managing this interface (configured using ospfPmIfNmE… |
| 1.3.6.1.4.1.629.10.3.1.7.1.85 | ColumnospfPmIfRstHlprStrictLsaChk | read-create | current | Whether to perform strict LSA checking when acting as a restart helper for a restarting peer on this interface. When ospfPmIfRstHlprStrictLsaChk is 'true', OSP… |
| 1.3.6.1.4.1.629.10.3.1.7.1.86 | ColumnospfPmIfStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfPmIfStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.7.1.87 | ColumnospfPmIfGraceLsaResendTimer | read-create | current | The value of the timer used to resend Grace LSA packets in seconds. Following an unplanned restart Grace LSAs are resent every unplnd_grace_lsa_resend_timer se… |
| 1.3.6.1.4.1.629.10.3.1.7.1.88 | ColumnospfPmIfGRDelayTimer | read-create | current | The value of the timer used to wait, after an unplanned graceful restart, before sending the first HELLO. If grace LSAs are being retransmitted, the retransmis… |
| 1.3.6.1.4.1.629.10.3.1.8 | TableospfPmIfMetricTable | not-accessible | current | The TOS metrics for a network interface identified by the the interface index. This does not apply to virtual interfaces or sham links. |
| 1.3.6.1.4.1.629.10.3.1.8.1 | RowospfPmIfMetricEntry | not-accessible | current | A particular TOS metric for a network interface identified by the interface index. |
| 1.3.6.1.4.1.629.10.3.1.8.1.1 | ColumnospfPmIfMetricIpAddress | not-accessible | current | The IP address of this OSPF interface. On row creation, this can be derived from the instance. |
| 1.3.6.1.4.1.629.10.3.1.8.1.2 | ColumnospfPmIfMetricAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the valu… |
| 1.3.6.1.4.1.629.10.3.1.8.1.3 | ColumnospfPmIfMetricTOS | not-accessible | current | The type of service metric being referenced. Since DC-OSPF does not support type of service, TOS must be set to zero. |
| 1.3.6.1.4.1.629.10.3.1.8.1.4 | ColumnospfPmIfMetricValue | read-create | current | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.629.10.3.1.8.1.5 | ColumnospfPmIfMetricStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.8.1.6 | ColumnospfPmIfMetricApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.9 | TableospfPmVirtIfTable | not-accessible | current | Information about this router's virtual interfaces. This table has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.9.1 | RowospfPmVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. This entry has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.9.1.1 | ColumnospfPmVirtIfAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.629.10.3.1.9.1.2 | ColumnospfPmVirtIfNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.629.10.3.1.9.1.3 | ColumnospfPmVirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link-state update packet over this interface. |
| 1.3.6.1.4.1.629.10.3.1.9.1.4 | ColumnospfPmVirtIfRetransInterval | read-create | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.629.10.3.1.9.1.5 | ColumnospfPmVirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. Note th… |
| 1.3.6.1.4.1.629.10.3.1.9.1.6 | ColumnospfPmVirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.629.10.3.1.9.1.7 | ColumnospfPmVirtIfState | read-only | current | OSPF virtual interface state. |
| 1.3.6.1.4.1.629.10.3.1.9.1.8 | ColumnospfPmVirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link. |
| 1.3.6.1.4.1.629.10.3.1.9.1.9 | ColumnospfPmVirtIfAuthKey | read-create | current | The cleartext password used as an OSPF Authentication key when simplePassword security is enabled. This object does not access any OSPF Cryptogaphic (e.g. MD5)… |
| 1.3.6.1.4.1.629.10.3.1.9.1.10 | ColumnospfPmVirtIfStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.9.1.11 | ColumnospfPmVirtIfAuthType | read-create | current | The authentication type specified for a virtual interface. Additional authentication types may be assigned locally. Note that this object can be used to engage… |
| 1.3.6.1.4.1.629.10.3.1.9.1.12 | ColumnospfPmVirtIfLsaCount | read-only | current | The total number of link-local link state advertisements in this virtual interface's link-local link state database. |
| 1.3.6.1.4.1.629.10.3.1.9.1.13 | ColumnospfPmVirtIfLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be use… |
| 1.3.6.1.4.1.629.10.3.1.9.1.14 | ColumnospfPmVirtIfApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.9.1.15 | ColumnospfPmVirtIfAdminStatus | read-create | current | The desired administrative state of this virtual interface. |
| 1.3.6.1.4.1.629.10.3.1.9.1.16 | ColumnospfPmVirtIfOperStatus | read-only | current | The current operational state of this virtual interface. |
| 1.3.6.1.4.1.629.10.3.1.9.1.17 | ColumnospfPmVirtIfResourceClass | read-only | current | This field specifies administrative group membership for this interface, in terms of a bit mask. An interface that is a member of multiple groups will have mul… |
| 1.3.6.1.4.1.629.10.3.1.9.1.18 | ColumnospfPmVirtIfTransmitTimerDelay | read-write | current | The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic.… |
| 1.3.6.1.4.1.629.10.3.1.9.1.19 | ColumnospfPmVirtIfIPMaxPacketSize | read-write | current | Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes… |
| 1.3.6.1.4.1.629.10.3.1.9.1.20 | ColumnospfPmVirtIfPassive | read-write | current | Indicates whether this interface is a passive interface. If set to true, we suppress HELLO packets sent on and received from this interface. We will therefore … |
| 1.3.6.1.4.1.629.10.3.1.9.1.21 | ColumnospfPmVirtIfInterfaceName | read-write | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.629.10.3.1.9.1.22 | ColumnospfPmVirtIfLsaRefreshIntvl | read-write | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.629.10.3.1.9.1.23 | ColumnospfPmVirtIfHelperModePolicy | read-write | current | Indicates whether DC-OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each o… |
| 1.3.6.1.4.1.629.10.3.1.9.1.24 | ColumnospfPmVirtIfMaxHtlssGracePeriod | read-write | current | If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighbor… |
| 1.3.6.1.4.1.629.10.3.1.9.1.25 | ColumnospfPmVirtIfEnableTeFlooding | read-write | current | Used to enable TE LSA flooding across this virtual interface. This allows the TE data network to be partitioned separately from the underlying OSPF control pla… |
| 1.3.6.1.4.1.629.10.3.1.9.1.26 | ColumnospfPmVirtIfAuthUserData | read-create | current | Authentication user data for interface level authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to as… |
| 1.3.6.1.4.1.629.10.3.1.9.1.27 | ColumnospfPmVirtIfFastHelloMultiplier | read-create | current | The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached… |
| 1.3.6.1.4.1.629.10.3.1.9.1.28 | ColumnospfPmVirtIfMtuIgnore | read-write | current | This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description pac… |
| 1.3.6.1.4.1.629.10.3.1.9.1.29 | ColumnospfPmVirtIfNmEntity | read-only | current | Identifies the NM entity that is handling this virtual interface. |
| 1.3.6.1.4.1.629.10.3.1.9.1.30 | ColumnospfPmVirtIfBfdDesired | read-create | current | Indicates whether Bidirectional Forwarding Detection (BFD) is desired on this interface. If the NM entity managing this virtual interface (configured using osp… |
| 1.3.6.1.4.1.629.10.3.1.9.1.31 | ColumnospfPmVirtIfRstHlprStrictLsaChk | read-create | current | Whether to perform strict LSA checking when acting as a restart helper for a restarting peer on this virtual interface. When ospfPmVirtIfRstHlprStrictLsaChk is… |
| 1.3.6.1.4.1.629.10.3.1.9.1.32 | ColumnospfPmVirtIfStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfPmVirtIfStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.9.1.33 | ColumnospfPmVirtIfGRDelayTimer | read-create | current | The value of the timer used to wait, after an unplanned graceful restart, before sending the first HELLO. If grace LSAs are being retransmitted, the retransmis… |
| 1.3.6.1.4.1.629.10.3.1.10 | TableospfPmNbrTable | not-accessible | current | A table of neighbor information for neighbors on network interfaces. This does not apply to neighbors on virtual interfaces, sham links or multi-area interface… |
| 1.3.6.1.4.1.629.10.3.1.10.1 | RowospfPmNbrEntry | not-accessible | current | The information regarding a single neighbor. This table has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.10.1.1 | ColumnospfPmNbrIpAddr | not-accessible | current | The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the address of another of the ne… |
| 1.3.6.1.4.1.629.10.3.1.10.1.2 | ColumnospfPmNbrAddressLessIndex | not-accessible | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.629.10.3.1.10.1.3 | ColumnospfPmNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.10.1.4 | ColumnospfPmNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.629.10.3.1.10.1.5 | ColumnospfPmNbrPriority | read-only | current | The priority of this neighbor as signalled in the last received OSPF Hello packet. A value of 0 signifies that the neighbor is not eligible to become the desig… |
| 1.3.6.1.4.1.629.10.3.1.10.1.6 | ColumnospfPmNbrState | read-only | current | The State of the relationship with this Neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.7 | ColumnospfPmNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.10.1.8 | ColumnospfPmNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.629.10.3.1.10.1.9 | ColumnospfPmNbrStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.10.1.10 | ColumnospfPmNbrPermanence | read-only | current | This variable displays the status of the entry. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.4.1.629.10.3.1.10.1.11 | ColumnospfPmNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.12 | ColumnospfPmNbrApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.10.1.13 | ColumnospfPmNbrAdminStatus | read-create | current | The desired administrative state of this neighbor. This object can only be changed for explicitly defined neighbors. For discovered neighbors (ospfPmNbrPermane… |
| 1.3.6.1.4.1.629.10.3.1.10.1.14 | ColumnospfPmNbrOperStatus | read-only | current | The current operational state of this neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.15 | ColumnospfPmNbrNumRequests | read-only | current | The number of LSAs we have requested from this neighbor for which we are still awaiting a response. This field is incremented when an LSA is requested by sendi… |
| 1.3.6.1.4.1.629.10.3.1.10.1.16 | ColumnospfPmNbrIfIpAddr | read-create | current | The IP address of the interface used for this neighbor. Note this field is only used for NBMA and P2MP links. If this value is set to zero DC-OSPF will choose … |
| 1.3.6.1.4.1.629.10.3.1.10.1.17 | ColumnospfPmNbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If Fast Hellos are in use, thi… |
| 1.3.6.1.4.1.629.10.3.1.10.1.18 | ColumnospfPmNbrAreaId | read-only | current | The area to which the neighbor belongs. If the oper_status is down, then this value is set to zero and the field is not valid. |
| 1.3.6.1.4.1.629.10.3.1.10.1.19 | ColumnospfPmNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.20 | ColumnospfPmNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.21 | ColumnospfPmNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.10.1.22 | ColumnospfPmNbrConfiguredPriority | read-write | current | The configured priority of this neighbor. This field is set to a non-zero value in order to initiate an 'hello' exchange with a neighbor over an NBMA interface… |
| 1.3.6.1.4.1.629.10.3.1.10.1.23 | ColumnospfPmNbrDesignatedRtrState | read-only | current | The designated router state of this neighbor. This field indicates whether the router is the designated router or backup designated router or neither. |
| 1.3.6.1.4.1.629.10.3.1.11 | TableospfPmVirtNbrTable | not-accessible | current | A table of virtual neighbor information. This table has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.11.1 | RowospfPmVirtNbrEntry | not-accessible | current | Virtual neighbor information. This table has been updated to include DC-OSPF implementation specific fields. |
| 1.3.6.1.4.1.629.10.3.1.11.1.1 | ColumnospfPmVirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.629.10.3.1.11.1.2 | ColumnospfPmVirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.11.1.3 | ColumnospfPmVirtNbrIpAddr | read-only | current | The IP address this Virtual Neighbor is using. |
| 1.3.6.1.4.1.629.10.3.1.11.1.4 | ColumnospfPmVirtNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.629.10.3.1.11.1.5 | ColumnospfPmVirtNbrState | read-only | current | The state of the Virtual Neighbor Relationship. |
| 1.3.6.1.4.1.629.10.3.1.11.1.6 | ColumnospfPmVirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.11.1.7 | ColumnospfPmVirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.629.10.3.1.11.1.8 | ColumnospfPmVirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.11.1.9 | ColumnospfPmVirtNbrApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.11.1.10 | ColumnospfPmVirtNbrNumRequests | read-only | current | The number of LSAs we have requested from this neighbor for which we are still awaiting a response. This field is incremented when an LSA is requested by sendi… |
| 1.3.6.1.4.1.629.10.3.1.11.1.11 | ColumnospfPmVirtNbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the virtual neighbor or we declare the adjacency down. If Fast Hellos are in … |
| 1.3.6.1.4.1.629.10.3.1.11.1.12 | ColumnospfPmVirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.11.1.13 | ColumnospfPmVirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.11.1.14 | ColumnospfPmVirtNbrRestartHelperExit | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.12 | TableospfPmExtLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.629.10.3.1.12.1 | RowospfPmExtLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.12.1.1 | ColumnospfPmExtLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.12.1.2 | ColumnospfPmExtLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.629.10.3.1.12.1.3 | ColumnospfPmExtLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.12.1.4 | ColumnospfPmExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.12.1.5 | ColumnospfPmExtLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.12.1.6 | ColumnospfPmExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.12.1.7 | ColumnospfPmExtLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.12.1.8 | ColumnospfPmExtLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.13 | NodeospfPmRouteGroup | |||
| 1.3.6.1.4.1.629.10.3.1.13.1 | NodeospfPmIntraArea | |||
| 1.3.6.1.4.1.629.10.3.1.13.2 | NodeospfPmInterArea | |||
| 1.3.6.1.4.1.629.10.3.1.13.3 | NodeospfPmExternalType1 | |||
| 1.3.6.1.4.1.629.10.3.1.13.4 | NodeospfPmExternalType2 | |||
| 1.3.6.1.4.1.629.10.3.1.14 | TableospfPmAreaAggregateTable | not-accessible | current | A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.629.10.3.1.14.1 | RowospfPmAreaAggregateEntry | not-accessible | current | A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.629.10.3.1.14.1.1 | ColumnospfPmAreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.629.10.3.1.14.1.2 | ColumnospfPmAreaAggregateLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Aggregate applies to. |
| 1.3.6.1.4.1.629.10.3.1.14.1.3 | ColumnospfPmAreaAggregateNet | not-accessible | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.629.10.3.1.14.1.4 | ColumnospfPmAreaAggregateMask | not-accessible | current | The Subnet Mask that pertains to the Net or Subnet. This mask should be contiguous, i.e. of the form 0xFFFF0000 and not 0xFF00FF00. |
| 1.3.6.1.4.1.629.10.3.1.14.1.5 | ColumnospfPmAreaAggregateStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction and destruction. |
| 1.3.6.1.4.1.629.10.3.1.14.1.6 | ColumnospfPmAreaAggregateEffect | read-create | current | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (effectAdvertiseMatching), or result in the subnet's not being advertise… |
| 1.3.6.1.4.1.629.10.3.1.14.1.7 | ColumnospfPmAreaAggregateApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.17 | TableospfPmLocalLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for network interfaces. This does not include link state for virtual interfaces, sham links or multi-area int… |
| 1.3.6.1.4.1.629.10.3.1.17.1 | RowospfPmLocalLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.17.1.1 | ColumnospfPmLocalLsdbIpAddress | not-accessible | current | The IP Address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.4.1.629.10.3.1.17.1.2 | ColumnospfPmLocalLsdbAddressLessIf | not-accessible | current | The Interface Index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.4.1.629.10.3.1.17.1.3 | ColumnospfPmLocalLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.17.1.4 | ColumnospfPmLocalLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.629.10.3.1.17.1.5 | ColumnospfPmLocalLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.17.1.6 | ColumnospfPmLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.17.1.7 | ColumnospfPmLocalLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.17.1.8 | ColumnospfPmLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.17.1.9 | ColumnospfPmLocalLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.17.1.10 | ColumnospfPmLocalLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.17.1.11 | ColumnospfPmLocalLsdbAreaId | read-only | current | The OSPF area in which the link belongs. |
| 1.3.6.1.4.1.629.10.3.1.18 | TableospfPmVirtLocalLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for virtual links. |
| 1.3.6.1.4.1.629.10.3.1.18.1 | RowospfPmVirtLocalLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.18.1.1 | ColumnospfPmVirtLocalLsdbTransitArea | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.629.10.3.1.18.1.2 | ColumnospfPmVirtLocalLsdbNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.629.10.3.1.18.1.3 | ColumnospfPmVirtLocalLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.18.1.4 | ColumnospfPmVirtLocalLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.629.10.3.1.18.1.5 | ColumnospfPmVirtLocalLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.18.1.6 | ColumnospfPmVirtLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.18.1.7 | ColumnospfPmVirtLocalLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.18.1.8 | ColumnospfPmVirtLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.18.1.9 | ColumnospfPmVirtLocalLsdbAdv | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.18.1.10 | ColumnospfPmVirtLocalLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.19 | TableospfPmMjTable | not-accessible | current | This table controls which entities the OSPF Protocol Manager should join to as master. Each join is represented by a row in this table. The status of each join… |
| 1.3.6.1.4.1.629.10.3.1.19.1 | RowospfPmMjEntry | not-accessible | current | Represents a join for which the OSPF Protocol Manager is master. |
| 1.3.6.1.4.1.629.10.3.1.19.1.1 | ColumnospfPmMjApplIndex | not-accessible | current | Identifies an OSPF Protocol Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.19.1.2 | ColumnospfPmMjInterfaceId | not-accessible | current | Identifies the interface required of this master join. |
| 1.3.6.1.4.1.629.10.3.1.19.1.3 | ColumnospfPmMjPartnerIndex | not-accessible | current | Identifies the slave entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slav… |
| 1.3.6.1.4.1.629.10.3.1.19.1.4 | ColumnospfPmMjRowStatus | read-create | current | The row status for this OSPF Protocol Manager Master Join Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.3.1.19.1.5 | ColumnospfPmMjAdminStatus | read-create | current | The administrative status of this master join, used to start and stop the join. |
| 1.3.6.1.4.1.629.10.3.1.19.1.6 | ColumnospfPmMjOperStatus | read-only | current | The current operational status of this master join. |
| 1.3.6.1.4.1.629.10.3.1.19.1.7 | ColumnospfPmMjJoinStatus | read-only | current | The status of the master join. |
| 1.3.6.1.4.1.629.10.3.1.20 | TableospfPmSjTable | not-accessible | current | This table contains information on joins for which OSPF Protocol Manager entities are acting as slaves. Each row in this table represents one slave join in a p… |
| 1.3.6.1.4.1.629.10.3.1.20.1 | RowospfPmSjEntry | not-accessible | current | Represents a join for which the OSPF Protocol Manager is slave. |
| 1.3.6.1.4.1.629.10.3.1.20.1.1 | ColumnospfPmSjApplIndex | not-accessible | current | Identifies an OSPF Protocol Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.20.1.2 | ColumnospfPmSjMasterIndex | not-accessible | current | Identifies the master entity. |
| 1.3.6.1.4.1.629.10.3.1.20.1.3 | ColumnospfPmSjJoinIndex | read-only | current | Index assigned to the join by the master to uniquely identify the join within the scope of the master entity. This is the index received in the join registrati… |
| 1.3.6.1.4.1.629.10.3.1.20.1.4 | ColumnospfPmSjJoinStatus | read-only | current | The status of the slave join. |
| 1.3.6.1.4.1.629.10.3.1.20.1.5 | ColumnospfPmSjInterfaceId | not-accessible | current | Identifies the interface provided on this slave join. |
| 1.3.6.1.4.1.629.10.3.1.21 | TableospfPmIfSwitchTable | not-accessible | current | The OSPF Interface Switching Descriptor Table describes the switching capabilities of the interfaces on the router. |
| 1.3.6.1.4.1.629.10.3.1.21.1 | RowospfPmIfSwitchEntry | not-accessible | current | The OSPF Interface Switching Descriptor Entry describes the switching capabilities of the interfaces on the router. |
| 1.3.6.1.4.1.629.10.3.1.21.1.1 | ColumnospfPmIfSwitchApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.21.1.2 | ColumnospfPmIfSwitchIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.3 | ColumnospfPmIfSwitchAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and address less interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the cor… |
| 1.3.6.1.4.1.629.10.3.1.21.1.4 | ColumnospfPmIfSwitchingCap | not-accessible | current | The switching capability of the interface. Possible values are as follows: - 1 Packet-Switch Capable-1 - 2 Packet-Switch Capable-2 - 3 Packet-Switch Capable-3 … |
| 1.3.6.1.4.1.629.10.3.1.21.1.5 | ColumnospfPmIfSwitchEncoding | not-accessible | current | The type of encoding used on this interface. Possible values are as follows: - 1 Packet - 2 Ethernet - 3 ANSI-ETSI-PDH - 5 SDH-SONET - 7 DIG-Wrapper - 8 Lambda… |
| 1.3.6.1.4.1.629.10.3.1.21.1.6 | ColumnospfPmIfSwitchMaxLSPBwidth0 | read-only | current | The MAX LSP bandwidth on this interface, at the first priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units ar… |
| 1.3.6.1.4.1.629.10.3.1.21.1.7 | ColumnospfPmIfSwitchLastMaxLSPBwidth0 | read-only | current | The last advertised MAX LSP Bandwidth at the first priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.8 | ColumnospfPmIfSwitchMaxLSPBwidth1 | read-only | current | The MAX LSP bandwidth on this interface, at the second priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units a… |
| 1.3.6.1.4.1.629.10.3.1.21.1.9 | ColumnospfPmIfSwitchLastMaxLSPBwidth1 | read-only | current | The last advertised MAX LSP Bandwidth at the second priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.10 | ColumnospfPmIfSwitchMaxLSPBwidth2 | read-only | current | The MAX LSP bandwidth on this interface, at the third priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units ar… |
| 1.3.6.1.4.1.629.10.3.1.21.1.11 | ColumnospfPmIfSwitchLastMaxLSPBwidth2 | read-only | current | The last advertised MAX LSP Bandwidth at the third priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.12 | ColumnospfPmIfSwitchMaxLSPBwidth3 | read-only | current | The MAX LSP bandwidth on this interface, at the fourth priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units a… |
| 1.3.6.1.4.1.629.10.3.1.21.1.13 | ColumnospfPmIfSwitchLastMaxLSPBwidth3 | read-only | current | The last advertised MAX LSP Bandwidth at the fourth priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.14 | ColumnospfPmIfSwitchMaxLSPBwidth4 | read-only | current | The MAX LSP bandwidth on this interface, at the fifth priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units ar… |
| 1.3.6.1.4.1.629.10.3.1.21.1.15 | ColumnospfPmIfSwitchLastMaxLSPBwidth4 | read-only | current | The last advertised MAX LSP Bandwidth at the fifth priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.16 | ColumnospfPmIfSwitchMaxLSPBwidth5 | read-only | current | The MAX LSP bandwidth on this interface, at the sixth priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units ar… |
| 1.3.6.1.4.1.629.10.3.1.21.1.17 | ColumnospfPmIfSwitchLastMaxLSPBwidth5 | read-only | current | The last advertised MAX LSP Bandwidth at the sixth priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.18 | ColumnospfPmIfSwitchMaxLSPBwidth6 | read-only | current | The MAX LSP bandwidth on this interface, at the seventh priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units … |
| 1.3.6.1.4.1.629.10.3.1.21.1.19 | ColumnospfPmIfSwitchLastMaxLSPBwidth6 | read-only | current | The last advertised MAX LSP Bandwidth at the seventh priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.20 | ColumnospfPmIfSwitchMaxLSPBwidth7 | read-only | current | The MAX LSP bandwidth on this interface, at the eighth priority level, in IEEE floating point format, used by CSPF to calculate constrained routes. The units a… |
| 1.3.6.1.4.1.629.10.3.1.21.1.21 | ColumnospfPmIfSwitchLastMaxLSPBwidth7 | read-only | current | The last advertised MAX LSP Bandwidth at the eighth priority level for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.22 | ColumnospfPmIfSwitchMinLSPBwidth | read-only | current | Specific information about the switching capability for this interface. This represents the Minimium LSP bandwidth for this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.23 | ColumnospfPmIfSwitchLastMinLSPBwidth | read-only | current | The last advertised Min LSP Bandwidth on this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.24 | ColumnospfPmIfSwitchMTUSize | read-only | current | Specific information about the switching capability for this interface. This field reports the Maximum Transmission Unit size for this type of traffic. Note th… |
| 1.3.6.1.4.1.629.10.3.1.21.1.25 | ColumnospfPmIfSwitchLastMTUSize | read-only | current | The last advertised Min LSP Bandwidth on this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.26 | ColumnospfPmIfSwitchSonetSdhSupport | read-only | current | The SONET or SDH supported on this interface. |
| 1.3.6.1.4.1.629.10.3.1.21.1.27 | ColumnospfPmIfSwitchISDIndex | not-accessible | current | An arbitrary index used to distinguish between Interface Switching Descriptors that are different, but have the same capability and encoding. |
| 1.3.6.1.4.1.629.10.3.1.22 | TableospfNmEntTable | not-accessible | current | The table of OSPF Neighbor Manager entities. |
| 1.3.6.1.4.1.629.10.3.1.22.1 | RowospfNmEntEntry | not-accessible | current | Each entry represents an instance of the OSPF Neighbor Manager entity. |
| 1.3.6.1.4.1.629.10.3.1.22.1.1 | ColumnospfNmEntIndex | not-accessible | current | The index of this ospfNmEntEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.3.6.1.4.1.629.10.3.1.22.1.2 | ColumnospfNmEntRowStatus | read-create | current | The row status for this NM Entity Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.3.1.22.1.3 | ColumnospfNmEntAdminStatus | read-create | current | The administrative status of this NM entity, used to activate and deactivate NM. |
| 1.3.6.1.4.1.629.10.3.1.22.1.4 | ColumnospfNmEntOperStatus | read-only | current | The current operational status of this NM entity. |
| 1.3.6.1.4.1.629.10.3.1.22.1.5 | ColumnospfNmMjEntityIndex | read-create | current | Identifies the PM entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slave P… |
| 1.3.6.1.4.1.629.10.3.1.22.1.6 | ColumnospfNmSckEntityIndex | read-create | current | Identifies the SCK stub entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable s… |
| 1.3.6.1.4.1.629.10.3.1.22.1.7 | ColumnospfNmEntNmiJoinOperStatus | read-only | current | The current operational state of the NMI join. ospfNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and ca… |
| 1.3.6.1.4.1.629.10.3.1.22.1.8 | ColumnospfNmEntSckJoinOperStatus | read-only | current | The current operational state of the SCK join. ospfNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and ca… |
| 1.3.6.1.4.1.629.10.3.1.22.1.9 | ColumnospfNmEntBfdEntityIndex | read-create | current | The entity index for the Bidirectional Forwarding Detection (BFD) provider to which this NM entity should join. Zero indicates that no BFD provider is availabl… |
| 1.3.6.1.4.1.629.10.3.1.22.1.10 | ColumnospfNmEntBfdJoinOperStatus | read-only | current | The current operational state of the BFDI join. If ospfNmEntBfdEntityIndex has a zero value, this field will have a value of 'operStatusDown'. This will not ha… |
| 1.3.6.1.4.1.629.10.3.1.22.1.11 | ColumnospfNmEntStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfNmEntStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.22.1.12 | ColumnospfNmEntEnableTrapSupport | read-create | current | Set this object to 'true' to enable trap support in DC-OSPF-NM. When this field is set to 'true', DC-OSPF-NM will generate traps for the events listed under AM… |
| 1.3.6.1.4.1.629.10.3.1.23 | TableospfPmIgpShortcutTable | not-accessible | current | The table of IGP shortcut tunnel interfaces known to OSPF. |
| 1.3.6.1.4.1.629.10.3.1.23.1 | RowospfPmIgpShortcutEntry | not-accessible | current | Each entry corresponds to one IGP shortcut tunnel interface known to OSPF on this system. |
| 1.3.6.1.4.1.629.10.3.1.23.1.1 | ColumnospfPmShortcutApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.23.1.2 | ColumnospfPmShortcutIfIndex | not-accessible | current | The value of ifIndex for the IGP shortcut tunnel interface. |
| 1.3.6.1.4.1.629.10.3.1.23.1.3 | ColumnospfPmShortcutRemoteAddress | read-only | current | The IP Address value for this remote address. |
| 1.3.6.1.4.1.629.10.3.1.23.1.4 | ColumnospfPmShortcutMetricType | read-only | current | The type of metric value assigned to this IGP shortcut. The type of metric value can be one of the following. - 'metricTypeAbsolute'; the metric defined by osp… |
| 1.3.6.1.4.1.629.10.3.1.23.1.5 | ColumnospfPmShortcutMetricValue | read-only | current | The metric assigned to this IGP shortcut. If ospfPmShortcutMetricType is set to 'metricTypeAbsolute' then this field takes a value in the range of 1 - 16777215… |
| 1.3.6.1.4.1.629.10.3.1.23.1.6 | ColumnospfPmShortcutOperStatus | read-only | current | The operational status of the IGP shortcut interface. The IGP shortcut interface is only usable by DC-OSPF if ospfPmShortcutOperStatus is set to 'up'. |
| 1.3.6.1.4.1.629.10.3.1.24 | TableospfPmDomainIdTable | not-accessible | current | The OSPF Domain ID Table. The OSPF Domain ID Table controls the LSA types assigned to BGP/MPLS IP VPN routes as part of OSPF PE-CE protocol function. This tabl… |
| 1.3.6.1.4.1.629.10.3.1.24.1 | RowospfPmDomainIdEntry | not-accessible | current | Each entry represents an OSPF Domain ID. |
| 1.3.6.1.4.1.629.10.3.1.24.1.1 | ColumnospfPmDomainIdApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.24.1.2 | ColumnospfPmDomainIdValue | not-accessible | current | The OSPF Domain ID value. The OSPF Domain ID value is a BGP extended community attribute value. It consists of a 2 byte Type field followed by a 6 byte Value f… |
| 1.3.6.1.4.1.629.10.3.1.24.1.3 | ColumnospfPmDomainIdRowStatus | read-create | current | The row status for this OSPF Domain ID Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.3.1.24.1.4 | ColumnospfPmDomainIdRole | read-create | current | The configured role of this OSPF Domain ID (primary or secondary). |
| 1.3.6.1.4.1.629.10.3.1.24.1.5 | ColumnospfPmDomainIdStatus | read-only | current | The actual status of this OSPF Domain ID. If the overall OSPF Domain ID configuration is valid then the actual OSPF Domain ID status matches its configured rol… |
| 1.3.6.1.4.1.629.10.3.1.25 | TableospfPmShamLinkTable | not-accessible | current | The OSPF Sham Link Table. The OSPF Sham Link Table configures sham links over the provider BGP/MPLS IP VPN backbone as part of OSPF PE-CE protocol function. Th… |
| 1.3.6.1.4.1.629.10.3.1.25.1 | RowospfPmShamLinkEntry | not-accessible | current | Each entry represents an OSPF sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.1 | ColumnospfPmShamLinkApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.25.1.2 | ColumnospfPmShamLinkAreaId | not-accessible | current | The OSPF area in which the sham link belongs. |
| 1.3.6.1.4.1.629.10.3.1.25.1.3 | ColumnospfPmShamLinkLocalIpAddr | not-accessible | current | The local sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.25.1.4 | ColumnospfPmShamLinkRemoteIpAddr | not-accessible | current | The remote sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.25.1.5 | ColumnospfPmShamLinkRowStatus | read-create | current | The row status for this OSPF Sham Link Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.3.1.25.1.6 | ColumnospfPmShamLinkIfIndex | read-create | current | The interface index assigned to this sham link. This is advertised in the router's router-LSAs. This field cannot be changed if the row is admin status up and … |
| 1.3.6.1.4.1.629.10.3.1.25.1.7 | ColumnospfPmShamLinkMetric | read-create | current | The configured metric for this sham link. If this metric is zero then the sham link uses the default metric specified by ospfPmEntVpnDfltShamLinkMetric. |
| 1.3.6.1.4.1.629.10.3.1.25.1.8 | ColumnospfPmShamLinkTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link-state update packet over this sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.9 | ColumnospfPmShamLinkRetransInterval | read-create | current | The number of seconds between link-state advertisement retransmissions for this sham link. This value is also used when retransmitting database description and… |
| 1.3.6.1.4.1.629.10.3.1.25.1.10 | ColumnospfPmShamLinkHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on this sham link. This value must be the same for the remote endpoint. Note th… |
| 1.3.6.1.4.1.629.10.3.1.25.1.11 | ColumnospfPmShamLinkRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.629.10.3.1.25.1.12 | ColumnospfPmShamLinkState | read-only | current | OSPF interface state for this sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.13 | ColumnospfPmShamLinkEvents | read-only | current | The number of state changes or error events on this sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.14 | ColumnospfPmShamLinkAuthType | read-create | current | The authentication type for this sham link. Additional authentication types may be assigned locally. Note that this object can be used to engage in significant… |
| 1.3.6.1.4.1.629.10.3.1.25.1.15 | ColumnospfPmShamLinkAuthKey | read-create | current | The cleartext password used as an OSPF Authentication key when simplePassword security is enabled. This object does not access any OSPF Cryptogaphic (e.g. MD5)… |
| 1.3.6.1.4.1.629.10.3.1.25.1.16 | ColumnospfPmShamLinkLsaCount | read-only | current | The total number of link-local link state advertisements in this sham link's link-local link state database. |
| 1.3.6.1.4.1.629.10.3.1.25.1.17 | ColumnospfPmShamLinkLsaCksumSum | read-only | current | The 32 bit unsigned sum of the link-state advertisements' LS checksums contained in this sham link's link-local link state database. The sum can be used to det… |
| 1.3.6.1.4.1.629.10.3.1.25.1.18 | ColumnospfPmShamLinkAdminStatus | read-create | current | The desired administrative state of this sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.19 | ColumnospfPmShamLinkOperStatus | read-only | current | The current operational state of this sham link. |
| 1.3.6.1.4.1.629.10.3.1.25.1.20 | ColumnospfPmShamLinkTransmitDelay | read-create | current | The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic.… |
| 1.3.6.1.4.1.629.10.3.1.25.1.21 | ColumnospfPmShamLinkIPMaxPacketSize | read-create | current | Maximum transfer unit (MTU) for this sham link. This is the maximum packet size in bytes for packets sent over the sham link. This size excludes link layer hea… |
| 1.3.6.1.4.1.629.10.3.1.25.1.22 | ColumnospfPmShamLinkInterfaceName | read-create | current | The textual name of the interface. Set to null if not known. This field cannot be changed if the row is admin status up and row status active. |
| 1.3.6.1.4.1.629.10.3.1.25.1.23 | ColumnospfPmShamLinkLsaRefreshIntvl | read-create | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.629.10.3.1.25.1.24 | ColumnospfPmShamLinkHelperModePolicy | read-create | current | Indicates whether DC-OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each o… |
| 1.3.6.1.4.1.629.10.3.1.25.1.25 | ColumnospfPmShamLinkMaxGracePeriod | read-create | current | If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighbor… |
| 1.3.6.1.4.1.629.10.3.1.25.1.26 | ColumnospfPmShamLinkEnableTeFlooding | read-create | current | Used to enable TE LSA flooding across this interface. This allows the TE data network to be partitioned separately from the underlying OSPF control plane netwo… |
| 1.3.6.1.4.1.629.10.3.1.25.1.27 | ColumnospfPmShamLinkAuthUserData | read-create | current | Authentication user data for interface level authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to as… |
| 1.3.6.1.4.1.629.10.3.1.25.1.28 | ColumnospfPmShamLinkFastHelloMult | read-create | current | The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached… |
| 1.3.6.1.4.1.629.10.3.1.25.1.29 | ColumnospfPmShamLinkMtuIgnore | read-create | current | This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description pac… |
| 1.3.6.1.4.1.629.10.3.1.25.1.30 | ColumnospfPmShamLinkNmEntity | read-create | current | The index of the OSPF NM entity that handles this sham link. This field cannot be changed if the row is admin status up and row status active. |
| 1.3.6.1.4.1.629.10.3.1.25.1.31 | ColumnospfPmShamLinkRstStrictLsaChk | read-create | current | Whether to perform strict LSA checking when acting as a restart helper for a restarting peer on this sham link. When ospfPmShamLinkRstStrictLsaChk is 'true', O… |
| 1.3.6.1.4.1.629.10.3.1.25.1.32 | ColumnospfPmShamLinkIpAddrConflict | read-only | current | Indicates whether the local sham link endpoint address conflicts with any addresses advertized into OSPF by this OSPF instance. To ensure proper operation of t… |
| 1.3.6.1.4.1.629.10.3.1.25.1.33 | ColumnospfPmShamLinkStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfPmShamLinkStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.25.1.34 | ColumnospfPmShamLinkGrcLsaRsndTmr | read-create | current | The value of the timer used to resend Grace LSA packets in seconds. Following an unplanned restart Grace LSAs are resent every unplnd_grace_lsa_resend_timer se… |
| 1.3.6.1.4.1.629.10.3.1.25.1.35 | ColumnospfPmShamLinkGRDelayTimer | read-create | current | The value of the timer used to wait, after an unplanned graceful restart, before sending the first HELLO. If grace LSAs are being retransmitted, the retransmis… |
| 1.3.6.1.4.1.629.10.3.1.26 | TableospfPmShamNbrTable | not-accessible | current | A table of sham link neighbor information. |
| 1.3.6.1.4.1.629.10.3.1.26.1 | RowospfPmShamNbrEntry | not-accessible | current | Sham link neighbor information. |
| 1.3.6.1.4.1.629.10.3.1.26.1.1 | ColumnospfPmShamNbrApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.26.1.2 | ColumnospfPmShamNbrAreaId | not-accessible | current | The OSPF area in which the sham link belongs. |
| 1.3.6.1.4.1.629.10.3.1.26.1.3 | ColumnospfPmShamNbrLocalIpAddr | not-accessible | current | The local sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.26.1.4 | ColumnospfPmShamNbrRemoteIpAddr | not-accessible | current | The remote sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.26.1.5 | ColumnospfPmShamNbrRouterId | read-only | current | The 32 bit number that uniquely identifies the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.26.1.6 | ColumnospfPmShamNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.629.10.3.1.26.1.7 | ColumnospfPmShamNbrState | read-only | current | The state of the sham link neighbor relationship. |
| 1.3.6.1.4.1.629.10.3.1.26.1.8 | ColumnospfPmShamNbrEvents | read-only | current | The number of times this sham link neighbor has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.26.1.9 | ColumnospfPmShamNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.629.10.3.1.26.1.10 | ColumnospfPmShamNbrNumRequests | read-only | current | The number of LSAs we have requested from this neighbor for which we are still awaiting a response. This field is incremented when an LSA is requested by sendi… |
| 1.3.6.1.4.1.629.10.3.1.26.1.11 | ColumnospfPmShamNbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the sham link neighbor or we declare the adjacency down. If Fast Hellos are i… |
| 1.3.6.1.4.1.629.10.3.1.26.1.12 | ColumnospfPmShamNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.26.1.13 | ColumnospfPmShamNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.26.1.14 | ColumnospfPmShamNbrRestartHelperExit | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.27 | TableospfPmShamLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for sham links. |
| 1.3.6.1.4.1.629.10.3.1.27.1 | RowospfPmShamLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.27.1.1 | ColumnospfPmShamLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.27.1.2 | ColumnospfPmShamLsdbAreaId | not-accessible | current | The OSPF area in which the sham link belongs. |
| 1.3.6.1.4.1.629.10.3.1.27.1.3 | ColumnospfPmShamLsdbLocalIpAddr | not-accessible | current | The local sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.27.1.4 | ColumnospfPmShamLsdbRemoteIpAddr | not-accessible | current | The remote sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.27.1.5 | ColumnospfPmShamLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.27.1.6 | ColumnospfPmShamLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.629.10.3.1.27.1.7 | ColumnospfPmShamLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.27.1.8 | ColumnospfPmShamLsdbSequence | read-only | current | The sequence number field is a signed 32 bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.27.1.9 | ColumnospfPmShamLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.27.1.10 | ColumnospfPmShamLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.27.1.11 | ColumnospfPmShamLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.28 | TableospfPmMultiAreaIfTable | not-accessible | current | The OSPF Multi-Area Interface Table describes multi-area interfaces for multi-area adjacencies (as defined in RFC 5185) from the viewpoint of OSPF. This table … |
| 1.3.6.1.4.1.629.10.3.1.28.1 | RowospfPmMultiAreaIfEntry | not-accessible | current | Each entry represents an OSPF multi-area interface. |
| 1.3.6.1.4.1.629.10.3.1.28.1.1 | ColumnospfPmMultiAreaIfApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.28.1.2 | ColumnospfPmMultiAreaIfIpAddress | not-accessible | current | The IP address of the primary OSPF interface that this multi-area interface relates to. |
| 1.3.6.1.4.1.629.10.3.1.28.1.3 | ColumnospfPmMultiAreaIfAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and address less interfaces; This variable takes the value 0 when the related primary interface has an IP… |
| 1.3.6.1.4.1.629.10.3.1.28.1.4 | ColumnospfPmMultiAreaIfAreaId | not-accessible | current | A 32-bit integer uniquely identifying the area to which this multi-area interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.629.10.3.1.28.1.5 | ColumnospfPmMultiAreaIfRemoteAddr | not-accessible | current | The IP address to which packets for this multi-area interface should be sent. On point-to-point interfaces there is no need to configure the remote address to … |
| 1.3.6.1.4.1.629.10.3.1.28.1.6 | ColumnospfPmMultiAreaIfStatus | read-create | current | The row status for this entry, used to create and destroy an entry in this table. |
| 1.3.6.1.4.1.629.10.3.1.28.1.7 | ColumnospfPmMultiAreaIfAdminStat | read-create | current | The interface's administrative status. The value of this field indicates whether the OSPF protocol will be run over this interface and whether this interface w… |
| 1.3.6.1.4.1.629.10.3.1.28.1.8 | ColumnospfPmMultiAreaIfOperStatus | read-only | current | The current operational state of this interface. Note that a multi-area interface cannot go operationally up until the corresponding primary interface is opera… |
| 1.3.6.1.4.1.629.10.3.1.28.1.9 | ColumnospfPmMultiAreaIfState | read-only | current | The OSPF Interface State for this multi-area interface. |
| 1.3.6.1.4.1.629.10.3.1.28.1.10 | ColumnospfPmMultiAreaIfEvents | read-only | current | The number of times this OSPF multi-area interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.28.1.11 | ColumnospfPmMultiAreaIfMetricValue | read-create | current | The metric assigned to this interface. |
| 1.3.6.1.4.1.629.10.3.1.28.1.12 | ColumnospfPmMultiAreaIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.629.10.3.1.28.1.13 | ColumnospfPmMultiAreaIfRetransInt | read-create | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.629.10.3.1.28.1.14 | ColumnospfPmMultiAreaIfHelloInt | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the neighbor at the other end… |
| 1.3.6.1.4.1.629.10.3.1.28.1.15 | ColumnospfPmMultiAreaIfRtrDeadInt | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.629.10.3.1.28.1.16 | ColumnospfPmMultiAreaIfFastHelloMult | read-create | current | The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached… |
| 1.3.6.1.4.1.629.10.3.1.28.1.17 | ColumnospfPmMultiAreaIfAuthType | read-create | current | The authentication type specified for this interface. Additional authentication types may be assigned locally. Note that this object can be used to engage in s… |
| 1.3.6.1.4.1.629.10.3.1.28.1.18 | ColumnospfPmMultiAreaIfAuthKey | read-create | current | The cleartext password used as an OSPF Authentication key when simplePassword security is enabled. This object does not access any OSPF Cryptogaphic (e.g. MD5)… |
| 1.3.6.1.4.1.629.10.3.1.28.1.19 | ColumnospfPmMultiAreaIfAuthUserData | read-create | current | Authentication user data for interface level authentication. This data is passed opaquely to the Metaswitch authentication interface where it can be used to as… |
| 1.3.6.1.4.1.629.10.3.1.28.1.20 | ColumnospfPmIfMultiAreaIPMaxPktSize | read-only | current | Maximum transfer unit (MTU) for the interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes link la… |
| 1.3.6.1.4.1.629.10.3.1.28.1.21 | ColumnospfPmMultiAreaIfMtuIgnore | read-write | current | This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description pac… |
| 1.3.6.1.4.1.629.10.3.1.28.1.22 | ColumnospfPmMultiAreaIfLsaCount | read-only | current | The total number of link-local link state advertisements in this interface's link-local link state database. |
| 1.3.6.1.4.1.629.10.3.1.28.1.23 | ColumnospfPmMultiAreaIfLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this multi-area interface's link-local link state database. The sum can be … |
| 1.3.6.1.4.1.629.10.3.1.28.1.24 | ColumnospfPmMultiAreaIfTrsmtTmrDelay | read-write | current | The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic.… |
| 1.3.6.1.4.1.629.10.3.1.28.1.25 | ColumnospfPmMultiAreaIfEnableTeFlood | read-write | current | Used to enable TE LSA flooding across this interface. This allows the TE data network to be partitioned separately from the underlying OSPF control plane netwo… |
| 1.3.6.1.4.1.629.10.3.1.28.1.26 | ColumnospfPmMultiAreaIfStatsReset | read-create | current | Set this object to 'true' to reset all stats counters in the ospfPmMaIfStatsTable that augments this table. Reading the value of this object has no meaning. |
| 1.3.6.1.4.1.629.10.3.1.28.1.27 | ColumnospfPmMultiAreaGraceLsaRsndTmr | read-create | current | The value of the timer used to resend Grace LSA packets in seconds. Following an unplanned restart Grace LSAs are resent every unplnd_grace_lsa_resend_timer se… |
| 1.3.6.1.4.1.629.10.3.1.28.1.28 | ColumnospfPmMultiAreaGRDelayTimer | read-create | current | The value of the timer used to wait, after an unplanned graceful restart, before sending the first HELLO. If grace LSAs are being retransmitted, the retransmis… |
| 1.3.6.1.4.1.629.10.3.1.29 | TableospfPmMultiAreaNbrTable | not-accessible | current | A read-only table containing multi-area adjacency neighbor information. This table is used to provide support for RFC 5185 - OSPF Multi-Area Adjacency. It is a… |
| 1.3.6.1.4.1.629.10.3.1.29.1 | RowospfPmMultiAreaNbrEntry | not-accessible | current | A table of multi-area interface neighbor information. |
| 1.3.6.1.4.1.629.10.3.1.29.1.1 | ColumnospfPmMultiAreaNbrApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.29.1.2 | ColumnospfPmMultiAreaNbrIfIpAddr | not-accessible | current | The IP address of the primary OSPF interface over which the neighbor can be reached. |
| 1.3.6.1.4.1.629.10.3.1.29.1.3 | ColumnospfPmMultiAreaNbrAddrLessIf | not-accessible | current | This variable takes the value 0 when the interface over which the neighbor can be reached has an IP Address, otherwise it takes the non-zero interface index va… |
| 1.3.6.1.4.1.629.10.3.1.29.1.4 | ColumnospfPmMultiAreaNbrAreaId | not-accessible | current | The area to which the adjacency to this neighbor belongs. |
| 1.3.6.1.4.1.629.10.3.1.29.1.5 | ColumnospfPmMultiAreaNbrRemoteAddr | not-accessible | current | The IP address to which packets for this multi-area adjacency are sent. On point-to-point interfaces there is no need to configure the remote address to send p… |
| 1.3.6.1.4.1.629.10.3.1.29.1.6 | ColumnospfPmMultiAreaNbrSrcIpAddr | read-only | current | The IP address this neighbor is using as its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the address of another of the ne… |
| 1.3.6.1.4.1.629.10.3.1.29.1.7 | ColumnospfPmMultiAreaNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.29.1.8 | ColumnospfPmMultiAreaNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.4.1.629.10.3.1.29.1.9 | ColumnospfPmMultiAreaNbrState | read-only | current | The State of the relationship with this Neighbor. |
| 1.3.6.1.4.1.629.10.3.1.29.1.10 | ColumnospfPmMultiAreaNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.629.10.3.1.29.1.11 | ColumnospfPmMultiAreaNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.629.10.3.1.29.1.12 | ColumnospfPmMultiAreaNbrNumRequests | read-only | current | The number of LSAs we have requested from this neighbor for which we are still awaiting a response. This field is incremented when an LSA is requested by sendi… |
| 1.3.6.1.4.1.629.10.3.1.29.1.13 | ColumnospfPmMultiAreaNbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the multi-area adjacency down. If Fast Hellos are … |
| 1.3.6.1.4.1.629.10.3.1.29.1.14 | ColumnospfPmMultiAreaNbrRstrtHelpSts | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.29.1.15 | ColumnospfPmMultiAreaNbrRstrtHelpAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.29.1.16 | ColumnospfPmMultiAreaNbrRstrtHelpExitR | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.629.10.3.1.30 | TableospfPmMultiAreaLclLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for multi-area adjacency links. This table is used to provide support for RFC 5185 - OSPF Multi-Area Adjacenc… |
| 1.3.6.1.4.1.629.10.3.1.30.1 | RowospfPmMultiAreaLclLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.629.10.3.1.30.1.1 | ColumnospfPmMultiAreaLclLsdbApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.30.1.2 | ColumnospfPmMultiAreaLclLsdbIpAddr | not-accessible | current | The IP Address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.4.1.629.10.3.1.30.1.3 | ColumnospfPmMultiAreaLclLsdbAddrLssIf | not-accessible | current | The Interface Index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.4.1.629.10.3.1.30.1.4 | ColumnospfPmMultiAreaLclLsdbAreaId | not-accessible | current | A 32-bit integer uniquely identifying the area to which the multi-area interface from which the LSA was received connects. Area ID 0.0.0.0 is used for the OSPF… |
| 1.3.6.1.4.1.629.10.3.1.30.1.5 | ColumnospfPmMultiAreaLclLsdbRemAddr | not-accessible | current | The IP address to which packets for this multi-area adjacency are sent. On point-to-point interfaces there is no need to configure the remote address to send p… |
| 1.3.6.1.4.1.629.10.3.1.30.1.6 | ColumnospfPmMultiAreaLclLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.629.10.3.1.30.1.7 | ColumnospfPmMultiAreaLclLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.629.10.3.1.30.1.8 | ColumnospfPmMultiAreaLclLsdbRtrId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.629.10.3.1.30.1.9 | ColumnospfPmMultiAreaLclLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.629.10.3.1.30.1.10 | ColumnospfPmMultiAreaLclLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.629.10.3.1.30.1.11 | ColumnospfPmMultiAreaLclLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.629.10.3.1.30.1.12 | ColumnospfPmMultiAreaLclLsdbAdvert | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.629.10.3.1.31 | TableospfPmEntStatsTable | not-accessible | current | The OSPF Entity Statistics Table is a read-only table including per-OSPF PM entity counters. This table is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.31.1 | RowospfPmEntStatsEntry | not-accessible | current | The OSPF Entity Statistics Entry containing statistics for the PM entity. This entry is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.31.1.1 | ColumnospfPmEntStatsIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.31.1.2 | ColumnospfPmEntStatsNoIf | read-only | current | The number of OSPF packet header errors detected of type 'OSPF cannot determine the receiving interface'. This count is incremented when the receiving interfac… |
| 1.3.6.1.4.1.629.10.3.1.31.1.3 | ColumnospfPmEntStatsNoVirtLink | read-only | current | The number of OSPF packet header 'no virtual link' errors. This count is incremented when a received packet appears to be for a virtual interface, but no recei… |
| 1.3.6.1.4.1.629.10.3.1.31.1.4 | ColumnospfPmEntStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.32 | TableospfPmIfStatsTable | not-accessible | current | The OSPF Interface Statistics Table is a read-only table including per-OSPF interface counters. This table is DC-OSPF implementation specific. As for the ospfP… |
| 1.3.6.1.4.1.629.10.3.1.32.1 | RowospfPmIfStatsEntry | not-accessible | current | The OSPF Interface Statistics Entry containing statistics for one interface from the viewpoint of OSPF. This entry is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.32.1.1 | ColumnospfPmIfStatsApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.32.1.2 | ColumnospfPmIfStatsIpAddress | not-accessible | current | The IP address of the OSPF interface. |
| 1.3.6.1.4.1.629.10.3.1.32.1.3 | ColumnospfPmIfStatsAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and address less interfaces; This variable takes the value 0 on interfaces with IP Addresses, and a non-z… |
| 1.3.6.1.4.1.629.10.3.1.32.1.4 | ColumnospfPmIfStatsRxInvalid | read-only | current | The number of OSPF packets with an invalid type field received on this interface. The count is reinitialized to zero when interface statistics collection is re… |
| 1.3.6.1.4.1.629.10.3.1.32.1.5 | ColumnospfPmIfStatsRxInvalidByte | read-only | current | The number of bytes received in OSPF packets with an invalid type field received on this interface. This count includes the IP header and any authentication da… |
| 1.3.6.1.4.1.629.10.3.1.32.1.6 | ColumnospfPmIfStatsRxHello | read-only | current | The number of OSPF Hello packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.7 | ColumnospfPmIfStatsRxHelloByte | read-only | current | The number of bytes received in OSPF Hello packets on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.32.1.8 | ColumnospfPmIfStatsRxDbDes | read-only | current | The number of OSPF Database Description packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.9 | ColumnospfPmIfStatsRxDbDesByte | read-only | current | The number of bytes received in OSPF Database Description packets on this interface. This count includes the IP header and any authentication data. The count i… |
| 1.3.6.1.4.1.629.10.3.1.32.1.10 | ColumnospfPmIfStatsRxLsReq | read-only | current | The number of OSPF LS Request packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.11 | ColumnospfPmIfStatsRxLsReqByte | read-only | current | The number of bytes received in OSPF LS Request packets on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.32.1.12 | ColumnospfPmIfStatsRxLsUpd | read-only | current | The number of OSPF LS Update packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.13 | ColumnospfPmIfStatsRxLsUpdByte | read-only | current | The number of bytes received in OSPF LS Update packets on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.32.1.14 | ColumnospfPmIfStatsRxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets received on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.32.1.15 | ColumnospfPmIfStatsRxLsAckByte | read-only | current | The number of bytes received in OSPF LS Acknowledgement packets on this interface. This count includes the IP header and any authentication data. The count is … |
| 1.3.6.1.4.1.629.10.3.1.32.1.16 | ColumnospfPmIfStatsTxFailed | read-only | current | The number of packets that OSPF could not send on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.17 | ColumnospfPmIfStatsTxFailedByte | read-only | current | The number of bytes in packets that OSPF could not send on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.32.1.18 | ColumnospfPmIfStatsTxHello | read-only | current | The number of OSPF Hello packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.19 | ColumnospfPmIfStatsTxHelloByte | read-only | current | The number of bytes in OSPF Hello packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized to … |
| 1.3.6.1.4.1.629.10.3.1.32.1.20 | ColumnospfPmIfStatsTxDbDes | read-only | current | The number of OSPF Database Description packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.21 | ColumnospfPmIfStatsTxDbDesByte | read-only | current | The number of bytes in OSPF Database Description packets sent on this interface. This count includes the IP header and any authentication data. The count is re… |
| 1.3.6.1.4.1.629.10.3.1.32.1.22 | ColumnospfPmIfStatsTxLsReq | read-only | current | The number of OSPF LS Request packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.23 | ColumnospfPmIfStatsTxLsReqByte | read-only | current | The number of bytes in OSPF LS Request packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialize… |
| 1.3.6.1.4.1.629.10.3.1.32.1.24 | ColumnospfPmIfStatsTxLsUpd | read-only | current | The number of OSPF LS Update packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.25 | ColumnospfPmIfStatsTxLsUpdByte | read-only | current | The number of bytes in OSPF LS Update packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.32.1.26 | ColumnospfPmIfStatsTxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.32.1.27 | ColumnospfPmIfStatsTxLsAckByte | read-only | current | The number of bytes in OSPF LS Acknowledgement packets sent on this interface. This count includes the IP header and any authentication data. The count is rein… |
| 1.3.6.1.4.1.629.10.3.1.32.1.28 | ColumnospfPmIfStatsLength | read-only | current | The number of OSPF packet header length errors detected on this interface. This count is incremented when either a received packet is too small to be identifie… |
| 1.3.6.1.4.1.629.10.3.1.32.1.29 | ColumnospfPmIfStatsCksum | read-only | current | The number of OSPF packet header checksum errors detected on this interface. This count is incremented when authentication of a received OSPF packet header che… |
| 1.3.6.1.4.1.629.10.3.1.32.1.30 | ColumnospfPmIfStatsVersion | read-only | current | The number of OSPF packet header version errors detected on this interface. This count is incremented when a received OSPF packet header Version field is inval… |
| 1.3.6.1.4.1.629.10.3.1.32.1.31 | ColumnospfPmIfStatsBadSrc | read-only | current | The number of OSPF packet header 'bad source' errors detected on this interface. This count is incremented when the source IP address of a received OSPF packet… |
| 1.3.6.1.4.1.629.10.3.1.32.1.32 | ColumnospfPmIfStatsAreaMismatch | read-only | current | The number of OSPF packet header 'area mismatch' errors detected on this interface. This count is incremented when the area id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.32.1.33 | ColumnospfPmIfStatsSelfOrig | read-only | current | The number of OSPF packet header 'self-originated' errors detected on this interface. This count is incremented when the source IP address of a received OSPF p… |
| 1.3.6.1.4.1.629.10.3.1.32.1.34 | ColumnospfPmIfStatsDupeId | read-only | current | The number of OSPF packet header 'duplicate id' errors detected on this interface. This count is incremented when the route id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.32.1.35 | ColumnospfPmIfStatsHello | read-only | current | The number of OSPF packet header 'Hello' errors detected on this interface. This count is incremented when a received OSPF HEllO packet fails verification. The… |
| 1.3.6.1.4.1.629.10.3.1.32.1.36 | ColumnospfPmIfStatsMtuMismatch | read-only | current | The number of OSPF packet header 'MTU mismatch' errors detected on this interface. This count is incremented when a received OSPF Database Description packet h… |
| 1.3.6.1.4.1.629.10.3.1.32.1.37 | ColumnospfPmIfStatsNbrIgnored | read-only | current | The number of OSPF packet header 'neighbor ignored' errors detected on this interface. This count is incremented when a received OSPF Hello packet is ignored b… |
| 1.3.6.1.4.1.629.10.3.1.32.1.38 | ColumnospfPmIfStatsAuth | read-only | current | The number of OSPF packet header authentication errors detected on this interface. This count is incremented when a received OSPF packet fails authentication c… |
| 1.3.6.1.4.1.629.10.3.1.32.1.39 | ColumnospfPmIfStatsWrongProto | read-only | current | The number of OSPF packet header 'wrong protocol' errors detected on this interface. This count is incremented when the IP protocol field in a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.32.1.40 | ColumnospfPmIfStatsResourceErr | read-only | current | The number of OSPF packet header resource errors detected on this interface. This count is incremented when a received OSPF packet is dropped because of resour… |
| 1.3.6.1.4.1.629.10.3.1.32.1.41 | ColumnospfPmIfStatsVirtMaIfClash | read-only | current | The number of OSPF packet header 'virtual interface clash with multi-area interface' errors detected on this interface. This count is incremented when a receiv… |
| 1.3.6.1.4.1.629.10.3.1.32.1.42 | ColumnospfPmIfStatsBadLsaLen | read-only | current | The number of OSPF LS Update packets received on this interface that were discarded because of a bad LSA length. This count is incremented when a received OSPF… |
| 1.3.6.1.4.1.629.10.3.1.32.1.43 | ColumnospfPmIfStatsLsaBadType | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA type. This count is incremented when a received LSA is ignored becaus… |
| 1.3.6.1.4.1.629.10.3.1.32.1.44 | ColumnospfPmIfStatsLsaBadLen | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA length. This count is incremented when a received LSA is ignored beca… |
| 1.3.6.1.4.1.629.10.3.1.32.1.45 | ColumnospfPmIfStatsLsaBadData | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of bad LSA data. This count is incremented when a received LSA is ignored because … |
| 1.3.6.1.4.1.629.10.3.1.32.1.46 | ColumnospfPmIfStatsLsaBadCksum | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA checksum value. This count is incremented when a received LSA is igno… |
| 1.3.6.1.4.1.629.10.3.1.32.1.47 | ColumnospfPmIfStatsIfStandby | read-only | current | The number of OSPF packet header 'interface in standby state' errors detected on this interface. This count is incremented when a received OSPF packet is dropp… |
| 1.3.6.1.4.1.629.10.3.1.32.1.48 | ColumnospfPmIfStatsUnkNbmaNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown NBMA neighbor. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.32.1.49 | ColumnospfPmIfStatsUnkVirtNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown virtual neighbor. This count is incremented when a r… |
| 1.3.6.1.4.1.629.10.3.1.32.1.50 | ColumnospfPmIfStatsAuthMismatch | read-only | current | The number of OSPF packets received on this interface that were dropped because of a bad authentication type. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.32.1.51 | ColumnospfPmIfStatsAuthFailure | read-only | current | The number of OSPF packets received on this interface that were dropped because packet authentication failed. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.32.1.52 | ColumnospfPmIfStatsNetmaskMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad netmask. This count is incremented when a received Hello packet is dr… |
| 1.3.6.1.4.1.629.10.3.1.32.1.53 | ColumnospfPmIfStatsHelloMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Hello Interval. This count is incremented when a received Hello packe… |
| 1.3.6.1.4.1.629.10.3.1.32.1.54 | ColumnospfPmIfStatsDeadMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Router Dead Interval. This count is incremented when a received Hello… |
| 1.3.6.1.4.1.629.10.3.1.32.1.55 | ColumnospfPmIfStatsOptionsMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of bad Optional Capabilities. This count is incremented when a received Hello … |
| 1.3.6.1.4.1.629.10.3.1.32.1.56 | ColumnospfPmIfStatsNbrAdminDown | read-only | current | The number of Hello packets received on this interface that were dropped because the sending neighbor is Oper State Down. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.32.1.57 | ColumnospfPmIfStatsPktLocalAddr | read-only | current | The number of Hello packets received on this interface that were dropped because they appear to come from the local router. This count is incremented when a re… |
| 1.3.6.1.4.1.629.10.3.1.32.1.58 | ColumnospfPmIfStatsMaIfNotP2p | read-only | current | The number of Hello packets received on this interface that were dropped because they were received on a multi-area interface that is not point-to-point. This … |
| 1.3.6.1.4.1.629.10.3.1.32.1.59 | ColumnospfPmIfStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.33 | TableospfPmVirtIfStatsTable | not-accessible | current | The OSPF Virtual Interface Statistics Table is a read-only table including per-OSPF interface counters. This table is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.33.1 | RowospfPmVirtIfStatsEntry | not-accessible | current | The OSPF Virtual Interface Statistics Entry containing statistics for one virtual interface from the viewpoint of OSPF. This entry is DC-OSPF implementation sp… |
| 1.3.6.1.4.1.629.10.3.1.33.1.1 | ColumnospfPmVirtIfStatsApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.33.1.2 | ColumnospfPmVirtIfStatsAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.629.10.3.1.33.1.3 | ColumnospfPmVirtIfStatsNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.629.10.3.1.33.1.4 | ColumnospfPmVirtIfStatsRxInvalid | read-only | current | The number of OSPF packets with an invalid type field received on this interface. The count is reinitialized to zero when interface statistics collection is re… |
| 1.3.6.1.4.1.629.10.3.1.33.1.5 | ColumnospfPmVirtIfStatsRxInvalidByte | read-only | current | The number of bytes received in OSPF packets with an invalid type field received on this interface. This count includes the IP header and any authentication da… |
| 1.3.6.1.4.1.629.10.3.1.33.1.6 | ColumnospfPmVirtIfStatsRxHello | read-only | current | The number of OSPF Hello packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.7 | ColumnospfPmVirtIfStatsRxHelloByte | read-only | current | The number of bytes received in OSPF Hello packets on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.33.1.8 | ColumnospfPmVirtIfStatsRxDbDes | read-only | current | The number of OSPF Database Description packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.9 | ColumnospfPmVirtIfStatsRxDbDesByte | read-only | current | The number of bytes received in OSPF Database Description packets on this interface. This count includes the IP header and any authentication data. The count i… |
| 1.3.6.1.4.1.629.10.3.1.33.1.10 | ColumnospfPmVirtIfStatsRxLsReq | read-only | current | The number of OSPF LS Request packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.11 | ColumnospfPmVirtIfStatsRxLsReqByte | read-only | current | The number of bytes received in OSPF LS Request packets on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.33.1.12 | ColumnospfPmVirtIfStatsRxLsUpd | read-only | current | The number of OSPF LS Update packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.13 | ColumnospfPmVirtIfStatsRxLsUpdByte | read-only | current | The number of bytes received in OSPF LS Update packets on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.33.1.14 | ColumnospfPmVirtIfStatsRxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets received on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.33.1.15 | ColumnospfPmVirtIfStatsRxLsAckByte | read-only | current | The number of bytes received in OSPF LS Acknowledgement packets on this interface. This count includes the IP header and any authentication data. The count is … |
| 1.3.6.1.4.1.629.10.3.1.33.1.16 | ColumnospfPmVirtIfStatsTxFailed | read-only | current | The number of packets that OSPF could not send on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.17 | ColumnospfPmVirtIfStatsTxFailedByte | read-only | current | The number of bytes in packets that OSPF could not send on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.33.1.18 | ColumnospfPmVirtIfStatsTxHello | read-only | current | The number of OSPF Hello packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.19 | ColumnospfPmVirtIfStatsTxHelloByte | read-only | current | The number of bytes in OSPF Hello packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized to … |
| 1.3.6.1.4.1.629.10.3.1.33.1.20 | ColumnospfPmVirtIfStatsTxDbDes | read-only | current | The number of OSPF Database Description packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.21 | ColumnospfPmVirtIfStatsTxDbDesByte | read-only | current | The number of bytes in OSPF Database Description packets sent on this interface. This count includes the IP header and any authentication data. The count is re… |
| 1.3.6.1.4.1.629.10.3.1.33.1.22 | ColumnospfPmVirtIfStatsTxLsReq | read-only | current | The number of OSPF LS Request packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.23 | ColumnospfPmVirtIfStatsTxLsReqByte | read-only | current | The number of bytes in OSPF LS Request packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialize… |
| 1.3.6.1.4.1.629.10.3.1.33.1.24 | ColumnospfPmVirtIfStatsTxLsUpd | read-only | current | The number of OSPF LS Update packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.25 | ColumnospfPmVirtIfStatsTxLsUpdByte | read-only | current | The number of bytes in OSPF LS Update packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.33.1.26 | ColumnospfPmVirtIfStatsTxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.33.1.27 | ColumnospfPmVirtIfStatsTxLsAckByte | read-only | current | The number of bytes in OSPF LS Acknowledgement packets sent on this interface. This count includes the IP header and any authentication data. The count is rein… |
| 1.3.6.1.4.1.629.10.3.1.33.1.28 | ColumnospfPmVirtIfStatsLength | read-only | current | The number of OSPF packet header length errors detected on this interface. This count is incremented when either a received packet is too small to be identifie… |
| 1.3.6.1.4.1.629.10.3.1.33.1.29 | ColumnospfPmVirtIfStatsCksum | read-only | current | The number of OSPF packet header checksum errors detected on this interface. This count is incremented when authentication of a received OSPF packet header che… |
| 1.3.6.1.4.1.629.10.3.1.33.1.30 | ColumnospfPmVirtIfStatsVersion | read-only | current | The number of OSPF packet header version errors detected on this interface. This count is incremented when a received OSPF packet header Version field is inval… |
| 1.3.6.1.4.1.629.10.3.1.33.1.31 | ColumnospfPmVirtIfStatsBadSrc | read-only | current | The number of OSPF packet header 'bad source' errors detected on this interface. This count is incremented when the source IP address of a received OSPF packet… |
| 1.3.6.1.4.1.629.10.3.1.33.1.32 | ColumnospfPmVirtIfStatsAreaMismatch | read-only | current | The number of OSPF packet header 'area mismatch' errors detected on this interface. This count is incremented when the area id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.33.1.33 | ColumnospfPmVirtIfStatsSelfOrig | read-only | current | The number of OSPF packet header 'self-originated' errors detected on this interface. This count is incremented when the source IP address of a received OSPF p… |
| 1.3.6.1.4.1.629.10.3.1.33.1.34 | ColumnospfPmVirtIfStatsDupeId | read-only | current | The number of OSPF packet header 'duplicate id' errors detected on this interface. This count is incremented when the route id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.33.1.35 | ColumnospfPmVirtIfStatsHello | read-only | current | The number of OSPF packet header 'Hello' errors detected on this interface. This count is incremented when a received OSPF HEllO packet fails verification. The… |
| 1.3.6.1.4.1.629.10.3.1.33.1.36 | ColumnospfPmVirtIfStatsMtuMismatch | read-only | current | The number of OSPF packet header 'MTU mismatch' errors detected on this interface. This count is incremented when a received OSPF Database Description packet h… |
| 1.3.6.1.4.1.629.10.3.1.33.1.37 | ColumnospfPmVirtIfStatsNbrIgnored | read-only | current | The number of OSPF packet header 'neighbor ignored' errors detected on this interface. This count is incremented when a received OSPF Hello packet is ignored b… |
| 1.3.6.1.4.1.629.10.3.1.33.1.38 | ColumnospfPmVirtIfStatsAuth | read-only | current | The number of OSPF packet header authentication errors detected on this interface. This count is incremented when a received OSPF packet fails authentication c… |
| 1.3.6.1.4.1.629.10.3.1.33.1.39 | ColumnospfPmVirtIfStatsWrongProto | read-only | current | The number of OSPF packet header 'wrong protocol' errors detected on this interface. This count is incremented when the IP protocol field in a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.33.1.40 | ColumnospfPmVirtIfStatsResourceErr | read-only | current | The number of OSPF packet header resource errors detected on this interface. This count is incremented when a received OSPF packet is dropped because of resour… |
| 1.3.6.1.4.1.629.10.3.1.33.1.41 | ColumnospfPmVirtIfStatsVirtMaIfClash | read-only | current | The number of OSPF packet header 'virtual interface clash with multi-area interface' errors detected on this interface. This count is incremented when a receiv… |
| 1.3.6.1.4.1.629.10.3.1.33.1.42 | ColumnospfPmVirtIfStatsBadLsaLen | read-only | current | The number of OSPF LS Update packets received on this interface that were discarded because of a bad LSA length. This count is incremented when a received OSPF… |
| 1.3.6.1.4.1.629.10.3.1.33.1.43 | ColumnospfPmVirtIfStatsLsaBadType | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA type. This count is incremented when a received LSA is ignored becaus… |
| 1.3.6.1.4.1.629.10.3.1.33.1.44 | ColumnospfPmVirtIfStatsLsaBadLen | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA length. This count is incremented when a received LSA is ignored beca… |
| 1.3.6.1.4.1.629.10.3.1.33.1.45 | ColumnospfPmVirtIfStatsLsaBadData | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of bad LSA data. This count is incremented when a received LSA is ignored because … |
| 1.3.6.1.4.1.629.10.3.1.33.1.46 | ColumnospfPmVirtIfStatsLsaBadCksum | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA checksum value. This count is incremented when a received LSA is igno… |
| 1.3.6.1.4.1.629.10.3.1.33.1.47 | ColumnospfPmVirtIfStatsUnkNbmaNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown NBMA neighbor. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.33.1.48 | ColumnospfPmVirtIfStatsUnkVirtNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown virtual neighbor. This count is incremented when a r… |
| 1.3.6.1.4.1.629.10.3.1.33.1.49 | ColumnospfPmVirtIfStatsAuthMismatch | read-only | current | The number of OSPF packets received on this interface that were dropped because of a bad authentication type. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.33.1.50 | ColumnospfPmVirtIfStatsAuthFailure | read-only | current | The number of OSPF packets received on this interface that were dropped because packet authentication failed. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.33.1.51 | ColumnospfPmVirtIfStatsNetmaskMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad netmask. This count is incremented when a received Hello packet is dr… |
| 1.3.6.1.4.1.629.10.3.1.33.1.52 | ColumnospfPmVirtIfStatsHelloMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Hello Interval. This count is incremented when a received Hello packe… |
| 1.3.6.1.4.1.629.10.3.1.33.1.53 | ColumnospfPmVirtIfStatsDeadMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Router Dead Interval. This count is incremented when a received Hello… |
| 1.3.6.1.4.1.629.10.3.1.33.1.54 | ColumnospfPmVirtIfStatsOptionsMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of bad Optional Capabilities. This count is incremented when a received Hello … |
| 1.3.6.1.4.1.629.10.3.1.33.1.55 | ColumnospfPmVirtIfStatsNbrAdminDown | read-only | current | The number of Hello packets received on this interface that were dropped because the sending neighbor is Oper State Down. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.33.1.56 | ColumnospfPmVirtIfStatsPktLocalAddr | read-only | current | The number of Hello packets received on this interface that were dropped because they appear to come from the local router. This count is incremented when a re… |
| 1.3.6.1.4.1.629.10.3.1.33.1.57 | ColumnospfPmVirtIfStatsMaIfNotP2p | read-only | current | The number of Hello packets received on this interface that were dropped because they were received on a multi-area interface that is not point-to-point. This … |
| 1.3.6.1.4.1.629.10.3.1.33.1.58 | ColumnospfPmVirtIfStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.34 | TableospfPmShamLinkStatsTable | not-accessible | current | The OSPF Sham Link Statistics Table is a read-only table including per-OSPF interface counters. This table is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.34.1 | RowospfPmShamLinkStatsEntry | not-accessible | current | The OSPF Sham Link Statistics Entry containing statistics for one sham link from the viewpoint of OSPF. This entry is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.34.1.1 | ColumnospfPmShamLinkStatsApplIndex | not-accessible | current | Identifies this OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.34.1.2 | ColumnospfPmShamLinkStatsAreaId | not-accessible | current | The OSPF area in which the sham link belongs. |
| 1.3.6.1.4.1.629.10.3.1.34.1.3 | ColumnospfPmShamLinkStatsLocalIpAddr | not-accessible | current | The local sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.34.1.4 | ColumnospfPmShamLinkStatsRemoteIpAddr | not-accessible | current | The remote sham link endpoint address. |
| 1.3.6.1.4.1.629.10.3.1.34.1.5 | ColumnospfPmShamLinkStatsRxInvalid | read-only | current | The number of OSPF packets with an invalid type field received on this interface. The count is reinitialized to zero when interface statistics collection is re… |
| 1.3.6.1.4.1.629.10.3.1.34.1.6 | ColumnospfPmShamLinkStatsRxInvalidByte | read-only | current | The number of bytes received in OSPF packets with an invalid type field received on this interface. This count includes the IP header and any authentication da… |
| 1.3.6.1.4.1.629.10.3.1.34.1.7 | ColumnospfPmShamLinkStatsRxHello | read-only | current | The number of OSPF Hello packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.8 | ColumnospfPmShamLinkStatsRxHelloByte | read-only | current | The number of bytes received in OSPF Hello packets on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.34.1.9 | ColumnospfPmShamLinkStatsRxDbDes | read-only | current | The number of OSPF Database Description packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.10 | ColumnospfPmShamLinkStatsRxDbDesByte | read-only | current | The number of bytes received in OSPF Database Description packets on this interface. This count includes the IP header and any authentication data. The count i… |
| 1.3.6.1.4.1.629.10.3.1.34.1.11 | ColumnospfPmShamLinkStatsRxLsReq | read-only | current | The number of OSPF LS Request packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.12 | ColumnospfPmShamLinkStatsRxLsReqByte | read-only | current | The number of bytes received in OSPF LS Request packets on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.34.1.13 | ColumnospfPmShamLinkStatsRxLsUpd | read-only | current | The number of OSPF LS Update packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.14 | ColumnospfPmShamLinkStatsRxLsUpdByte | read-only | current | The number of bytes received in OSPF LS Update packets on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.34.1.15 | ColumnospfPmShamLinkStatsRxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets received on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.34.1.16 | ColumnospfPmShamLinkStatsRxLsAckByte | read-only | current | The number of bytes received in OSPF LS Acknowledgement packets on this interface. This count includes the IP header and any authentication data. The count is … |
| 1.3.6.1.4.1.629.10.3.1.34.1.17 | ColumnospfPmShamLinkStatsTxFailed | read-only | current | The number of packets that OSPF could not send on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.18 | ColumnospfPmShamLinkStatsTxFailedByte | read-only | current | The number of bytes in packets that OSPF could not send on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.34.1.19 | ColumnospfPmShamLinkStatsTxHello | read-only | current | The number of OSPF Hello packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.20 | ColumnospfPmShamLinkStatsTxHelloByte | read-only | current | The number of bytes in OSPF Hello packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized to … |
| 1.3.6.1.4.1.629.10.3.1.34.1.21 | ColumnospfPmShamLinkStatsTxDbDes | read-only | current | The number of OSPF Database Description packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.22 | ColumnospfPmShamLinkStatsTxDbDesByte | read-only | current | The number of bytes in OSPF Database Description packets sent on this interface. This count includes the IP header and any authentication data. The count is re… |
| 1.3.6.1.4.1.629.10.3.1.34.1.23 | ColumnospfPmShamLinkStatsTxLsReq | read-only | current | The number of OSPF LS Request packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.24 | ColumnospfPmShamLinkStatsTxLsReqByte | read-only | current | The number of bytes in OSPF LS Request packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialize… |
| 1.3.6.1.4.1.629.10.3.1.34.1.25 | ColumnospfPmShamLinkStatsTxLsUpd | read-only | current | The number of OSPF LS Update packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.26 | ColumnospfPmShamLinkStatsTxLsUpdByte | read-only | current | The number of bytes in OSPF LS Update packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.34.1.27 | ColumnospfPmShamLinkStatsTxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.34.1.28 | ColumnospfPmShamLinkStatsTxLsAckByte | read-only | current | The number of bytes in OSPF LS Acknowledgement packets sent on this interface. This count includes the IP header and any authentication data. The count is rein… |
| 1.3.6.1.4.1.629.10.3.1.34.1.29 | ColumnospfPmShamLinkStatsLength | read-only | current | The number of OSPF packet header length errors detected on this interface. This count is incremented when either a received packet is too small to be identifie… |
| 1.3.6.1.4.1.629.10.3.1.34.1.30 | ColumnospfPmShamLinkStatsCksum | read-only | current | The number of OSPF packet header checksum errors detected on this interface. This count is incremented when authentication of a received OSPF packet header che… |
| 1.3.6.1.4.1.629.10.3.1.34.1.31 | ColumnospfPmShamLinkStatsVersion | read-only | current | The number of OSPF packet header version errors detected on this interface. This count is incremented when a received OSPF packet header Version field is inval… |
| 1.3.6.1.4.1.629.10.3.1.34.1.32 | ColumnospfPmShamLinkStatsBadSrc | read-only | current | The number of OSPF packet header 'bad source' errors detected on this interface. This count is incremented when the source IP address of a received OSPF packet… |
| 1.3.6.1.4.1.629.10.3.1.34.1.33 | ColumnospfPmShamLinkStatsAreaMismatch | read-only | current | The number of OSPF packet header 'area mismatch' errors detected on this interface. This count is incremented when the area id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.34.1.34 | ColumnospfPmShamLinkStatsSelfOrig | read-only | current | The number of OSPF packet header 'self-originated' errors detected on this interface. This count is incremented when the source IP address of a received OSPF p… |
| 1.3.6.1.4.1.629.10.3.1.34.1.35 | ColumnospfPmShamLinkStatsDupeId | read-only | current | The number of OSPF packet header 'duplicate id' errors detected on this interface. This count is incremented when the route id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.34.1.36 | ColumnospfPmShamLinkStatsHello | read-only | current | The number of OSPF packet header 'Hello' errors detected on this interface. This count is incremented when a received OSPF HEllO packet fails verification. The… |
| 1.3.6.1.4.1.629.10.3.1.34.1.37 | ColumnospfPmShamLinkStatsMtuMismatch | read-only | current | The number of OSPF packet header 'MTU mismatch' errors detected on this interface. This count is incremented when a received OSPF Database Description packet h… |
| 1.3.6.1.4.1.629.10.3.1.34.1.38 | ColumnospfPmShamLinkStatsNbrIgnored | read-only | current | The number of OSPF packet header 'neighbor ignored' errors detected on this interface. This count is incremented when a received OSPF Hello packet is ignored b… |
| 1.3.6.1.4.1.629.10.3.1.34.1.39 | ColumnospfPmShamLinkStatsAuth | read-only | current | The number of OSPF packet header authentication errors detected on this interface. This count is incremented when a received OSPF packet fails authentication c… |
| 1.3.6.1.4.1.629.10.3.1.34.1.40 | ColumnospfPmShamLinkStatsWrongProto | read-only | current | The number of OSPF packet header 'wrong protocol' errors detected on this interface. This count is incremented when the IP protocol field in a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.34.1.41 | ColumnospfPmShamLinkStatsResourceErr | read-only | current | The number of OSPF packet header resource errors detected on this interface. This count is incremented when a received OSPF packet is dropped because of resour… |
| 1.3.6.1.4.1.629.10.3.1.34.1.42 | ColumnospfPmShamLinkStatsVirtMaIfClash | read-only | current | The number of OSPF packet header 'virtual interface clash with multi-area interface' errors detected on this interface. This count is incremented when a receiv… |
| 1.3.6.1.4.1.629.10.3.1.34.1.43 | ColumnospfPmShamLinkStatsBadLsaLen | read-only | current | The number of OSPF LS Update packets received on this interface that were discarded because of a bad LSA length. This count is incremented when a received OSPF… |
| 1.3.6.1.4.1.629.10.3.1.34.1.44 | ColumnospfPmShamLinkStatsLsaBadType | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA type. This count is incremented when a received LSA is ignored becaus… |
| 1.3.6.1.4.1.629.10.3.1.34.1.45 | ColumnospfPmShamLinkStatsLsaBadLen | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA length. This count is incremented when a received LSA is ignored beca… |
| 1.3.6.1.4.1.629.10.3.1.34.1.46 | ColumnospfPmShamLinkStatsLsaBadData | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of bad LSA data. This count is incremented when a received LSA is ignored because … |
| 1.3.6.1.4.1.629.10.3.1.34.1.47 | ColumnospfPmShamLinkStatsLsaBadCksum | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA checksum value. This count is incremented when a received LSA is igno… |
| 1.3.6.1.4.1.629.10.3.1.34.1.48 | ColumnospfPmShamLinkStatsUnkNbmaNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown NBMA neighbor. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.34.1.49 | ColumnospfPmShamLinkStatsUnkVirtNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown virtual neighbor. This count is incremented when a r… |
| 1.3.6.1.4.1.629.10.3.1.34.1.50 | ColumnospfPmShamLinkStatsAuthMismatch | read-only | current | The number of OSPF packets received on this interface that were dropped because of a bad authentication type. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.34.1.51 | ColumnospfPmShamLinkStatsAuthFailure | read-only | current | The number of OSPF packets received on this interface that were dropped because packet authentication failed. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.34.1.52 | ColumnospfPmShamLinkStatsNetmaskMsmtch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad netmask. This count is incremented when a received Hello packet is dr… |
| 1.3.6.1.4.1.629.10.3.1.34.1.53 | ColumnospfPmShamLinkStatsHelloMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Hello Interval. This count is incremented when a received Hello packe… |
| 1.3.6.1.4.1.629.10.3.1.34.1.54 | ColumnospfPmShamLinkStatsDeadMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Router Dead Interval. This count is incremented when a received Hello… |
| 1.3.6.1.4.1.629.10.3.1.34.1.55 | ColumnospfPmShamLinkStatsOptionsMsmtch | read-only | current | The number of Hello packets received on this interface that were dropped because of bad Optional Capabilities. This count is incremented when a received Hello … |
| 1.3.6.1.4.1.629.10.3.1.34.1.56 | ColumnospfPmShamLinkStatsNbrAdminDown | read-only | current | The number of Hello packets received on this interface that were dropped because the sending neighbor is Oper State Down. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.34.1.57 | ColumnospfPmShamLinkStatsPktLocalAddr | read-only | current | The number of Hello packets received on this interface that were dropped because they appear to come from the local router. This count is incremented when a re… |
| 1.3.6.1.4.1.629.10.3.1.34.1.58 | ColumnospfPmShamLinkStatsMaIfNotP2p | read-only | current | The number of Hello packets received on this interface that were dropped because they were received on a multi-area interface that is not point-to-point. This … |
| 1.3.6.1.4.1.629.10.3.1.34.1.59 | ColumnospfPmShamLinkStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.35 | TableospfPmMaIfStatsTable | not-accessible | current | The OSPF Multi-Area Interface Statistics Table is a read-only table including per-OSPF interface counters. This table is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.35.1 | RowospfPmMaIfStatsEntry | not-accessible | current | The OSPF Multi-Area Interface Statistics Entry containing statistics for one multi-area interface from the viewpoint of OSPF. This entry is DC-OSPF implementat… |
| 1.3.6.1.4.1.629.10.3.1.35.1.1 | ColumnospfPmMaIfStatsApplIndex | not-accessible | current | Identifies the DC-OSPF entity. |
| 1.3.6.1.4.1.629.10.3.1.35.1.2 | ColumnospfPmMaIfStatsIpAddress | not-accessible | current | The IP address of the primary OSPF interface that this multi-area interface relates to. |
| 1.3.6.1.4.1.629.10.3.1.35.1.3 | ColumnospfPmMaIfStatsAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and address less interfaces; This variable takes the value 0 when the related primary interface has an IP… |
| 1.3.6.1.4.1.629.10.3.1.35.1.4 | ColumnospfPmMaIfStatsAreaId | not-accessible | current | A 32-bit integer uniquely identifying the area to which this multi-area interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.629.10.3.1.35.1.5 | ColumnospfPmMaIfStatsRemoteAddr | not-accessible | current | The IP address to which packets for this multi-area interface should be sent. |
| 1.3.6.1.4.1.629.10.3.1.35.1.6 | ColumnospfPmMaIfStatsRxInvalid | read-only | current | The number of OSPF packets with an invalid type field received on this interface. The count is reinitialized to zero when interface statistics collection is re… |
| 1.3.6.1.4.1.629.10.3.1.35.1.7 | ColumnospfPmMaIfStatsRxInvalidByte | read-only | current | The number of bytes received in OSPF packets with an invalid type field received on this interface. This count includes the IP header and any authentication da… |
| 1.3.6.1.4.1.629.10.3.1.35.1.8 | ColumnospfPmMaIfStatsRxHello | read-only | current | The number of OSPF Hello packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.9 | ColumnospfPmMaIfStatsRxHelloByte | read-only | current | The number of bytes received in OSPF Hello packets on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.35.1.10 | ColumnospfPmMaIfStatsRxDbDes | read-only | current | The number of OSPF Database Description packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.11 | ColumnospfPmMaIfStatsRxDbDesByte | read-only | current | The number of bytes received in OSPF Database Description packets on this interface. This count includes the IP header and any authentication data. The count i… |
| 1.3.6.1.4.1.629.10.3.1.35.1.12 | ColumnospfPmMaIfStatsRxLsReq | read-only | current | The number of OSPF LS Request packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.13 | ColumnospfPmMaIfStatsRxLsReqByte | read-only | current | The number of bytes received in OSPF LS Request packets on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.35.1.14 | ColumnospfPmMaIfStatsRxLsUpd | read-only | current | The number of OSPF LS Update packets received on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.15 | ColumnospfPmMaIfStatsRxLsUpdByte | read-only | current | The number of bytes received in OSPF LS Update packets on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.35.1.16 | ColumnospfPmMaIfStatsRxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets received on this interface. This count includes the IP header and any authentication data. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.35.1.17 | ColumnospfPmMaIfStatsRxLsAckByte | read-only | current | The number of bytes received in OSPF LS Acknowledgement packets on this interface. This count includes the IP header and any authentication data. The count is … |
| 1.3.6.1.4.1.629.10.3.1.35.1.18 | ColumnospfPmMaIfStatsTxFailed | read-only | current | The number of packets that OSPF could not send on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.19 | ColumnospfPmMaIfStatsTxFailedByte | read-only | current | The number of bytes in packets that OSPF could not send on this interface. This count includes the IP header and any authentication data. The count is reinitia… |
| 1.3.6.1.4.1.629.10.3.1.35.1.20 | ColumnospfPmMaIfStatsTxHello | read-only | current | The number of OSPF Hello packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.21 | ColumnospfPmMaIfStatsTxHelloByte | read-only | current | The number of bytes in OSPF Hello packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized to … |
| 1.3.6.1.4.1.629.10.3.1.35.1.22 | ColumnospfPmMaIfStatsTxDbDes | read-only | current | The number of OSPF Database Description packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.23 | ColumnospfPmMaIfStatsTxDbDesByte | read-only | current | The number of bytes in OSPF Database Description packets sent on this interface. This count includes the IP header and any authentication data. The count is re… |
| 1.3.6.1.4.1.629.10.3.1.35.1.24 | ColumnospfPmMaIfStatsTxLsReq | read-only | current | The number of OSPF LS Request packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.25 | ColumnospfPmMaIfStatsTxLsReqByte | read-only | current | The number of bytes in OSPF LS Request packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialize… |
| 1.3.6.1.4.1.629.10.3.1.35.1.26 | ColumnospfPmMaIfStatsTxLsUpd | read-only | current | The number of OSPF LS Update packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.27 | ColumnospfPmMaIfStatsTxLsUpdByte | read-only | current | The number of bytes in OSPF LS Update packets sent on this interface. This count includes the IP header and any authentication data. The count is reinitialized… |
| 1.3.6.1.4.1.629.10.3.1.35.1.28 | ColumnospfPmMaIfStatsTxLsAck | read-only | current | The number of OSPF LS Acknowledgement packets sent on this interface. The count is reinitialized to zero when interface statistics collection is reset. |
| 1.3.6.1.4.1.629.10.3.1.35.1.29 | ColumnospfPmMaIfStatsTxLsAckByte | read-only | current | The number of bytes in OSPF LS Acknowledgement packets sent on this interface. This count includes the IP header and any authentication data. The count is rein… |
| 1.3.6.1.4.1.629.10.3.1.35.1.30 | ColumnospfPmMaIfStatsLength | read-only | current | The number of OSPF packet header length errors detected on this interface. This count is incremented when either a received packet is too small to be identifie… |
| 1.3.6.1.4.1.629.10.3.1.35.1.31 | ColumnospfPmMaIfStatsCksum | read-only | current | The number of OSPF packet header checksum errors detected on this interface. This count is incremented when authentication of a received OSPF packet header che… |
| 1.3.6.1.4.1.629.10.3.1.35.1.32 | ColumnospfPmMaIfStatsVersion | read-only | current | The number of OSPF packet header version errors detected on this interface. This count is incremented when a received OSPF packet header Version field is inval… |
| 1.3.6.1.4.1.629.10.3.1.35.1.33 | ColumnospfPmMaIfStatsBadSrc | read-only | current | The number of OSPF packet header 'bad source' errors detected on this interface. This count is incremented when the source IP address of a received OSPF packet… |
| 1.3.6.1.4.1.629.10.3.1.35.1.34 | ColumnospfPmMaIfStatsAreaMismatch | read-only | current | The number of OSPF packet header 'area mismatch' errors detected on this interface. This count is incremented when the area id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.35.1.35 | ColumnospfPmMaIfStatsSelfOrig | read-only | current | The number of OSPF packet header 'self-originated' errors detected on this interface. This count is incremented when the source IP address of a received OSPF p… |
| 1.3.6.1.4.1.629.10.3.1.35.1.36 | ColumnospfPmMaIfStatsDupeId | read-only | current | The number of OSPF packet header 'duplicate id' errors detected on this interface. This count is incremented when the route id in a received OSPF packet header… |
| 1.3.6.1.4.1.629.10.3.1.35.1.37 | ColumnospfPmMaIfStatsHello | read-only | current | The number of OSPF packet header 'Hello' errors detected on this interface. This count is incremented when a received OSPF HEllO packet fails verification. The… |
| 1.3.6.1.4.1.629.10.3.1.35.1.38 | ColumnospfPmMaIfStatsMtuMismatch | read-only | current | The number of OSPF packet header 'MTU mismatch' errors detected on this interface. This count is incremented when a received OSPF Database Description packet h… |
| 1.3.6.1.4.1.629.10.3.1.35.1.39 | ColumnospfPmMaIfStatsNbrIgnored | read-only | current | The number of OSPF packet header 'neighbor ignored' errors detected on this interface. This count is incremented when a received OSPF Hello packet is ignored b… |
| 1.3.6.1.4.1.629.10.3.1.35.1.40 | ColumnospfPmMaIfStatsAuth | read-only | current | The number of OSPF packet header authentication errors detected on this interface. This count is incremented when a received OSPF packet fails authentication c… |
| 1.3.6.1.4.1.629.10.3.1.35.1.41 | ColumnospfPmMaIfStatsWrongProto | read-only | current | The number of OSPF packet header 'wrong protocol' errors detected on this interface. This count is incremented when the IP protocol field in a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.35.1.42 | ColumnospfPmMaIfStatsResourceErr | read-only | current | The number of OSPF packet header resource errors detected on this interface. This count is incremented when a received OSPF packet is dropped because of resour… |
| 1.3.6.1.4.1.629.10.3.1.35.1.43 | ColumnospfPmMaIfStatsVirtMaIfClash | read-only | current | The number of OSPF packet header 'virtual interface clash with multi-area interface' errors detected on this interface. This count is incremented when a receiv… |
| 1.3.6.1.4.1.629.10.3.1.35.1.44 | ColumnospfPmMaIfStatsBadLsaLen | read-only | current | The number of OSPF LS Update packets received on this interface that were discarded because of a bad LSA length. This count is incremented when a received OSPF… |
| 1.3.6.1.4.1.629.10.3.1.35.1.45 | ColumnospfPmMaIfStatsLsaBadType | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA type. This count is incremented when a received LSA is ignored becaus… |
| 1.3.6.1.4.1.629.10.3.1.35.1.46 | ColumnospfPmMaIfStatsLsaBadLen | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA length. This count is incremented when a received LSA is ignored beca… |
| 1.3.6.1.4.1.629.10.3.1.35.1.47 | ColumnospfPmMaIfStatsLsaBadData | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of bad LSA data. This count is incremented when a received LSA is ignored because … |
| 1.3.6.1.4.1.629.10.3.1.35.1.48 | ColumnospfPmMaIfStatsLsaBadCksum | read-only | current | The number of OSPF LSAs received on this interface that were ignored because of a bad LSA checksum value. This count is incremented when a received LSA is igno… |
| 1.3.6.1.4.1.629.10.3.1.35.1.49 | ColumnospfPmMaIfStatsUnkNbmaNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown NBMA neighbor. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.35.1.50 | ColumnospfPmMaIfStatsUnkVirtNbr | read-only | current | The number of Hello packets received on this interface that were dropped because they came from an unknown virtual neighbor. This count is incremented when a r… |
| 1.3.6.1.4.1.629.10.3.1.35.1.51 | ColumnospfPmMaIfStatsAuthMismatch | read-only | current | The number of OSPF packets received on this interface that were dropped because of a bad authentication type. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.35.1.52 | ColumnospfPmMaIfStatsAuthFailure | read-only | current | The number of OSPF packets received on this interface that were dropped because packet authentication failed. This count is incremented when a received OSPF pa… |
| 1.3.6.1.4.1.629.10.3.1.35.1.53 | ColumnospfPmMaIfStatsNetmaskMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad netmask. This count is incremented when a received Hello packet is dr… |
| 1.3.6.1.4.1.629.10.3.1.35.1.54 | ColumnospfPmMaIfStatsHelloMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Hello Interval. This count is incremented when a received Hello packe… |
| 1.3.6.1.4.1.629.10.3.1.35.1.55 | ColumnospfPmMaIfStatsDeadMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of a bad Router Dead Interval. This count is incremented when a received Hello… |
| 1.3.6.1.4.1.629.10.3.1.35.1.56 | ColumnospfPmMaIfStatsOptionsMismatch | read-only | current | The number of Hello packets received on this interface that were dropped because of bad Optional Capabilities. This count is incremented when a received Hello … |
| 1.3.6.1.4.1.629.10.3.1.35.1.57 | ColumnospfPmMaIfStatsNbrAdminDown | read-only | current | The number of Hello packets received on this interface that were dropped because the sending neighbor is Oper State Down. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.35.1.58 | ColumnospfPmMaIfStatsPktLocalAddr | read-only | current | The number of Hello packets received on this interface that were dropped because they appear to come from the local router. This count is incremented when a re… |
| 1.3.6.1.4.1.629.10.3.1.35.1.59 | ColumnospfPmMaIfStatsMaIfNotP2p | read-only | current | The number of Hello packets received on this interface that were dropped because they were received on a multi-area interface that is not point-to-point. This … |
| 1.3.6.1.4.1.629.10.3.1.35.1.60 | ColumnospfPmMaIfStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.36 | TableospfNmEntStatsTable | not-accessible | current | The OSPF Entity Statistics Table is a read-only table including per-OSPF interface counters. This table is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.36.1 | RowospfNmEntStatsEntry | not-accessible | current | The OSPF Entity Statistics Entry containing statistics for the NM entity. This entry is DC-OSPF implementation specific. |
| 1.3.6.1.4.1.629.10.3.1.36.1.1 | ColumnospfNmEntStatsIndex | not-accessible | current | Identifies the DC-OSPF NM entity. |
| 1.3.6.1.4.1.629.10.3.1.36.1.2 | ColumnospfNmEntStatsLength | read-only | current | The number of OSPF packet header length errors detected in the case where OSPF cannot determine the receiving interface. This count is incremented when a recei… |
| 1.3.6.1.4.1.629.10.3.1.36.1.3 | ColumnospfNmEntStatsNoIf | read-only | current | The number of OSPF packet header errors detected of type 'OSPF cannot determine the receiving interface'. This count is incremented when the receiving interfac… |
| 1.3.6.1.4.1.629.10.3.1.36.1.4 | ColumnospfNmEntStatsNoVirtLink | read-only | current | The number of OSPF packet header 'no virtual link' errors. This count is incremented when a received packet appears to be for a virtual interface, but no recei… |
| 1.3.6.1.4.1.629.10.3.1.36.1.5 | ColumnospfNmEntStatsInstanceId | read-only | current | The number of OSPF packet header 'instance id' errors detected in the case where OSPF cannot determine the receiving interface. The count is reinitialized to z… |
| 1.3.6.1.4.1.629.10.3.1.36.1.6 | ColumnospfNmEntStatsBadIpHdrLen | read-only | current | The number of OSPF packet header 'bad IP header length' errors detected in the case where OSPF cannot determine the receiving interface. The count is reinitial… |
| 1.3.6.1.4.1.629.10.3.1.36.1.7 | ColumnospfNmEntStatsVersion | read-only | current | The number of OSPF packet header version errors detected in the case where OSPF cannot determine the receiving interface. This count is incremented when a rece… |
| 1.3.6.1.4.1.629.10.3.1.36.1.8 | ColumnospfNmEntStatsBadSrc | read-only | current | The number of OSPF packet header 'bad source' errors detected in the case where OSPF cannot determine the receiving interface. This count is incremented when t… |
| 1.3.6.1.4.1.629.10.3.1.36.1.9 | ColumnospfNmEntStatsResourceErr | read-only | current | The number of OSPF packet header resource errors detected in the case where OSPF cannot determine the receiving interface. This count is incremented when a rec… |
| 1.3.6.1.4.1.629.10.3.1.36.1.10 | ColumnospfNmEntStatsBadPacket | read-only | current | The number of OSPF packets received that have been dropped, for a reason which does not have a more specific type defined in the DC-OSPF user exit interface. T… |
| 1.3.6.1.4.1.629.10.3.1.37 | TableospfPmSpfEntryTable | not-accessible | current | The OSPF SPF entry table is a read-only table which shows information about routers in the SPF tree for each area, as calculated by DC-OSPF. Each row in this t… |
| 1.3.6.1.4.1.629.10.3.1.37.1 | RowospfPmSpfEntryEntry | not-accessible | current | An entry in the OSPF SPF entry table, showing information about a router in the SPF tree for an area, as calculated by DC-OSPF. Each entry corresponds to a nex… |
| 1.3.6.1.4.1.629.10.3.1.37.1.1 | ColumnospfPmSpfEntryApplIndex | not-accessible | current | Identifies the DC-OSPF PM entity. |
| 1.3.6.1.4.1.629.10.3.1.37.1.2 | ColumnospfPmSpfEntryAreaId | not-accessible | current | The area in which the router is connected. |
| 1.3.6.1.4.1.629.10.3.1.37.1.3 | ColumnospfPmSpfEntryRtrId | not-accessible | current | The router ID of the connected router. |
| 1.3.6.1.4.1.629.10.3.1.37.1.4 | ColumnospfPmSpfEntryNextHopIdx | not-accessible | current | An arbitrary index used to distinguish between multiple equal-cost next hops to the same router. |
| 1.3.6.1.4.1.629.10.3.1.37.1.5 | ColumnospfPmSpfEntryNextHopAddr | read-only | current | The next hop address to reach the router. If there are multiple equal cost next hops to the router then there will be multiple rows in this table. |
| 1.3.6.1.4.1.629.10.3.1.37.1.6 | ColumnospfPmSpfEntryIfIndex | read-only | current | The outgoing interface for the next hop. If there are multiple equal cost next hops to the router then there will be multiple rows in this table. |
| 1.3.6.1.4.1.629.10.3.1.37.1.7 | ColumnospfPmSpfEntryCost | read-only | current | The path cost to reach the router. This always represents the intra-area path cost. |
| 1.3.6.1.4.1.629.10.3.1.37.1.8 | ColumnospfPmSpfEntryIsASBR | read-only | current | Whether the router is an Autonomous System Boundary Router (ASBR). |
| 1.3.6.1.4.1.629.10.3.1.37.1.9 | ColumnospfPmSpfEntryIsABR | read-only | current | Whether the router is an Area Border Router (ABR). |
| 1.3.6.1.4.1.629.10.3.1.37.1.10 | ColumnospfPmSpfEntryIsVirtEndpt | read-only | current | Whether the router is an endpoint of one or more fully adjacent virtual links. |
| 1.3.6.1.4.1.629.10.3.1.37.1.11 | ColumnospfPmSpfEntryCalcIndex | read-only | current | An index which identifies the last route calculation started by DC-OSPF. If this index changes between GET responses it means that the two sets of information … |
| 1.3.6.1.4.1.629.10.3.1.38 | TableospfPmRouteTable | not-accessible | current | The OSPF route table is a read-only table which shows information about IPv4 routes as calculated by DC-OSPF. Each row in this table corresponds to a next hop … |
| 1.3.6.1.4.1.629.10.3.1.38.1 | RowospfPmRouteEntry | not-accessible | current | An entry in the OSPF route table, showing information about IPv4 routes as calculated by DC-OSPF. Each entry corresponds to a next hop for a route to an IPv4 d… |
| 1.3.6.1.4.1.629.10.3.1.38.1.1 | ColumnospfPmRouteApplIndex | not-accessible | current | Identifies the DC-OSPF PM entity. |
| 1.3.6.1.4.1.629.10.3.1.38.1.2 | ColumnospfPmRouteAddrPrefix | not-accessible | current | The IP address of the destination. |
| 1.3.6.1.4.1.629.10.3.1.38.1.3 | ColumnospfPmRouteAddrPrefixLen | not-accessible | current | Prefix length (in bits) to apply to the destination address, to obtain the set of addresses to which this route applies. |
| 1.3.6.1.4.1.629.10.3.1.38.1.4 | ColumnospfPmRouteNextHopIdx | not-accessible | current | An arbitrary index used to distinguish between multiple equal-cost next hops to the same destination. |
| 1.3.6.1.4.1.629.10.3.1.38.1.5 | ColumnospfPmRouteNextHopAddr | read-only | current | The next hop address to reach the destination. If there are multiple equal cost next hops to the destination then there will be multiple rows in this table. |
| 1.3.6.1.4.1.629.10.3.1.38.1.6 | ColumnospfPmRouteIfIndex | read-only | current | The outgoing interface for the next hop. If there are multiple equal cost next hops to the destination then there will be multiple rows in this table. |
| 1.3.6.1.4.1.629.10.3.1.38.1.7 | ColumnospfPmRouteAreaId | read-only | current | If the path_type is AMB_OSPF_PATH_INTRA_AREA then this field indicates the area associated with the route. Otherwise this field is set to all zeros and has no … |
| 1.3.6.1.4.1.629.10.3.1.38.1.8 | ColumnospfPmRouteCost | read-only | current | The cost of the path to the destination. For type 2 external routes this field indicates the cost of the path's external portion only. |
| 1.3.6.1.4.1.629.10.3.1.38.1.9 | ColumnospfPmRoutePathType | read-only | current | The type of path to reach the destination. |
| 1.3.6.1.4.1.629.10.3.1.38.1.10 | ColumnospfPmRouteCalcIndex | read-only | current | An index which identifies the last route calculation started by DC-OSPF. If this index changes between GET responses it means that the two sets of information … |
| 1.3.6.1.4.1.629.10.3.1.39 | TableospfPmRouterDestTable | not-accessible | current | The OSPF router destination table is a read-only table which shows information about routes to other OSPF routers, as calculated by DC-OSPF. Note that DC-OSPF … |
| 1.3.6.1.4.1.629.10.3.1.39.1 | RowospfPmRouterDestEntry | not-accessible | current | An entry in the OSPF router destination table, showing information about routes to other OSPF routers, as calculated by DC-OSPF. Note that DC-OSPF only calcula… |
| 1.3.6.1.4.1.629.10.3.1.39.1.1 | ColumnospfPmRouterDestApplIndex | not-accessible | current | Identifies the DC-OSPF PM entity. |
| 1.3.6.1.4.1.629.10.3.1.39.1.2 | ColumnospfPmRouterDestRouterId | not-accessible | current | The OSPF router ID of the destination router. |
| 1.3.6.1.4.1.629.10.3.1.39.1.3 | ColumnospfPmRouterDestAreaId | not-accessible | current | The area associated with the route to the router. |
| 1.3.6.1.4.1.629.10.3.1.39.1.4 | ColumnospfPmRouterDestNextHopIdx | not-accessible | current | An arbitrary index used to distinguish between multiple equal-cost next hops to the same router. |
| 1.3.6.1.4.1.629.10.3.1.39.1.5 | ColumnospfPmRouterDestNextHopAddr | read-only | current | The next hop address to reach the destination router. If there are multiple equal cost next hops to the destination then there will be multiple rows in this ta… |
| 1.3.6.1.4.1.629.10.3.1.39.1.6 | ColumnospfPmRouterDestIfIndex | read-only | current | The outgoing interface for the next hop. If there are multiple equal cost next hops to the destination router then there will be multiple rows in this table. |
| 1.3.6.1.4.1.629.10.3.1.39.1.7 | ColumnospfPmRouterDestCost | read-only | current | The cost of the path to the destination router. For type 2 external routes this field indicates the cost of the path's external portion only. |
| 1.3.6.1.4.1.629.10.3.1.39.1.8 | ColumnospfPmRouterDestIsASBR | read-only | current | Whether the destination router is an Autonomous System Boundary Router (ASBR). Set to AMB_TRUE if the destination is advertising ASBR capabilities. |
| 1.3.6.1.4.1.629.10.3.1.39.1.9 | ColumnospfPmRouterDestIsABR | read-only | current | Whether the destination is an Area Border Router (ABR). Set to AMB_TRUE if the destination router is advertising ABR capabilities. |
| 1.3.6.1.4.1.629.10.3.1.39.1.10 | ColumnospfPmRouterDestIsVirtEndpt | read-only | current | Whether the destination is an endpoint of one or more fully adjacent virtual links. Set to AMB_TRUE if the destination router is a virtual endpoint. |
| 1.3.6.1.4.1.629.10.3.1.39.1.11 | ColumnospfPmRouterDestPathType | read-only | current | The type of path to reach the destination router. |
| 1.3.6.1.4.1.629.10.3.1.39.1.12 | ColumnospfPmRouterDestCalcIndex | read-only | current | An index which identifies the last route calculation started by DC-OSPF. If this index changes between GET responses it means that the two sets of information … |
| 1.3.6.1.4.1.629.10.3.2 | NodeospfConformance | |||
| 1.3.6.1.4.1.629.10.3.2.1 | NodeospfGroups | |||
| 1.3.6.1.4.1.629.10.3.2.1.1 | GroupospfBasicGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.2 | GroupospfAreaGroup | current | These objects are required for OSPF systems supporting areas. | |
| 1.3.6.1.4.1.629.10.3.2.1.3 | GroupospfStubAreaGroup | current | These objects are required for OSPF systems supporting stub areas. | |
| 1.3.6.1.4.1.629.10.3.2.1.4 | GroupospfLsdbGroup | current | These objects are required for OSPF systems that display their link state database. | |
| 1.3.6.1.4.1.629.10.3.2.1.6 | GroupospfHostGroup | current | These objects are required for OSPF systems that support attached hosts. | |
| 1.3.6.1.4.1.629.10.3.2.1.7 | GroupospfIfGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.8 | GroupospfIfMetricGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.9 | GroupospfVirtIfGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.10 | GroupospfNbrGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.11 | GroupospfVirtNbrGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.12 | GroupospfExtLsdbGroup | current | These objects are required for OSPF systems that display their link state database. | |
| 1.3.6.1.4.1.629.10.3.2.1.13 | GroupospfAreaAggregateGroup | current | These objects are required for OSPF systems. | |
| 1.3.6.1.4.1.629.10.3.2.1.14 | GroupospfPropLocalLsdbGroup | current | Proprietary objects for ospfPmLocalLsdbTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.15 | GroupospfPropVirtLocalLsdbGroup | current | Proprietary objects for ospfPmVirtLocalLsdbTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.16 | GroupospfPropMjGroup | current | Proprietary objects for ospfPmMjTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.17 | GroupospfPropSjGroup | current | Proprietary objects for ospfPmSjTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.18 | GroupospfPropIfSwitchGroup | current | Proprietary objects for ospfPmSjTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.19 | GroupospfPropAreaObsoleteGroup | obsolete | Obsolete objects for ospfPmAreaTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.20 | GroupospfPropVirtIfGroup | current | Proprietary objects for ospfPmVirtIfTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.21 | GroupospfPropIfGroup | current | Proprietary objects for ospfPmIfTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.22 | GroupospfPropAreaGroup | current | Proprietary objects for ospfPmAreaTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.23 | GroupospfPropEntGroup | current | Proprietary objects for ospfPmEntTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.24 | GroupospfPropNmEntGroup | current | Proprietary objects for ospfNmEntTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.25 | GroupospfPropIgpShortcutGroup | current | Proprietary objects for ospfPmIgpShortcutTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.26 | GroupospfPropDomainIdGroup | current | Proprietary objects for the proprietary ospfPmDomainIdTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.27 | GroupospfPropShamLinkGroup | current | Proprietary objects for the proprietary ospfPmShamLinkTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.28 | GroupospfPropShamNbrGroup | current | Proprietary objects for the proprietary ospfPmShamNbrTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.29 | GroupospfPropShamLsdbGroup | current | Proprietary objects for the proprietary ospfPmShamLsdbTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.30 | GroupospfPropMultiAreaIfGroup | current | Proprietary objects for the proprietary ospfPmMultiAreaIfTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.31 | GroupospfPropMultiAreaNbrGroup | current | Proprietary objects for the proprietary ospfPmMultiAreaNbrTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.32 | GroupospfPropMultiAreaLclLsdbGroup | current | Proprietary objects for the proprietary ospfPmMultiAreaLclLsdbTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.33 | GroupospfPropPmEntStatsGroup | current | Proprietary objects for the proprietary ospfPmEntStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.34 | GroupospfPropIfStatsGroup | current | Proprietary objects for the proprietary ospfPmIfStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.35 | GroupospfPropVirtIfStatsGroup | current | Proprietary objects for the proprietary ospfPmVirtIfStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.36 | GroupospfPropShamLinkStatsGroup | current | Proprietary objects for the proprietary ospfPmShamLinkStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.37 | GroupospfPmMaIfStatsGroup | current | Proprietary objects for the proprietary ospfPmMaIfStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.38 | GroupospfPropNmEntStatsGroup | current | Proprietary objects for the proprietary ospfNmEntStatsTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.39 | GroupospfPmSpfEntryGroup | current | Proprietary objects for the proprietary ospfPmSpfEntryTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.40 | GroupospfPmRouteTableGroup | current | Proprietary objects for the proprietary ospfPmRouteTable. | |
| 1.3.6.1.4.1.629.10.3.2.1.41 | GroupospfPmRouterDestGroup | current | Proprietary objects for the proprietary ospfPmRouterDestTable. | |
| 1.3.6.1.4.1.629.10.3.2.2 | NodeospfCompliances | |||
| 1.3.6.1.4.1.629.10.3.2.2.1 | ComplianceospfCompliance | current | The compliance statement | |
| 1.3.6.1.4.1.629.10.3.3 | NodeospfTrap | |||
| 1.3.6.1.4.1.629.10.3.3.0 | NodeospfTraps | |||
| 1.3.6.1.4.1.629.10.3.3.0.1 | NotificationospfVirtIfStateChange | current | DC-OSPF generates this trap when the state of a virtual interface changes. | |
| 1.3.6.1.4.1.629.10.3.3.0.2 | NotificationospfNbrStateChange | current | DC-OSPF generates this trap when the state of a neighbor changes. | |
| 1.3.6.1.4.1.629.10.3.3.0.3 | NotificationospfVirtNbrStateChange | current | DC-OSPF generates this trap when the state of a virtual neighbor changes. | |
| 1.3.6.1.4.1.629.10.3.3.0.4 | NotificationospfIfConfigError | current | DC-OSPF generates this trap when a packet is received, matched to a network interface and then dropped because of mismatching configuration. | |
| 1.3.6.1.4.1.629.10.3.3.0.5 | NotificationospfVirtIfConfigError | current | DC-OSPF generates this trap when a packet is received, matched to a virtual interface and then dropped because of mismatching configuration. | |
| 1.3.6.1.4.1.629.10.3.3.0.6 | NotificationospfIfAuthFailure | current | DC-OSPF generates this trap when a packet is received that fails to authenticate over a network interface. | |
| 1.3.6.1.4.1.629.10.3.3.0.7 | NotificationospfVirtIfAuthFailure | current | DC-OSPF generates this trap when a packet is received that fails to authenticate over a virtual interface. | |
| 1.3.6.1.4.1.629.10.3.3.0.8 | NotificationospfIfStateChange | current | DC-OSPF generates this trap when the state of a network interface changes. | |
| 1.3.6.1.4.1.629.10.3.3.0.9 | NotificationospfNssaTranslatorStatusChange | current | DC-OSPF generates this trap when the local router's ability to translate type-5 LSAs changes. | |
| 1.3.6.1.4.1.629.10.3.3.0.10 | NotificationospfNbrRestartHelperStatusChange | current | DC-OSPF PM generates this trap when it enters or leaves graceful restart helper state for a neighbor on a network interface. | |
| 1.3.6.1.4.1.629.10.3.3.0.11 | NotificationospfVirtNbrRstrtHelperStatusChng | current | DC-OSPF PM generates this trap when it enters or leaves graceful restart helper state for a virtual neighbor. | |
| 1.3.6.1.4.1.629.10.3.3.0.12 | NotificationospfPmOperStateChange | current | DC-OSPF generates this trap when the operational state of OSPF-PM enters UP, DOWN or ACT_FAILED state. | |
| 1.3.6.1.4.1.629.10.3.3.1 | NodeospfTrapControl | |||
| 1.3.6.1.4.1.629.10.3.3.1.1 | ScalarospfConfigErrorType | read-only | current | Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVirtError traps. When the last value of a trap using this object is neede… |
| 1.3.6.1.4.1.629.10.3.3.1.2 | ScalarospfPacketType | read-only | current | OSPF packet types. When the last value of a trap using this object is needed, but no traps of that type have been sent, this value pertaining to this object sh… |
| 1.3.6.1.4.1.629.10.3.3.1.3 | ScalarospfPacketSrc | read-only | current | The IP address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a trap using this object is needed, but no traps o… |
| 1.3.6.1.4.1.629.10.3.3.1.4 | ScalarospfTrapVirtIfAreaId | accessible-for-notify | current | Version of ospfPmVirtIfAreaId used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.5 | ScalarospfTrapVirtIfNeighbor | accessible-for-notify | current | Version of ospfPmVirtIfNeighbor used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.6 | ScalarospfTrapPmEntIndex | accessible-for-notify | current | Version of ospfPmEntIndex used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.7 | ScalarospfTrapNbrIpAddr | accessible-for-notify | current | Version of ospfPmNbrIpAddr used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.8 | ScalarospfTrapNbrAddressLessIndex | accessible-for-notify | current | Version of ospfPmNbrAddressLessIndex used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.9 | ScalarospfTrapVirtNbrArea | accessible-for-notify | current | Version of ospfPmVirtNbrArea used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.10 | ScalarospfTrapVirtNbrRtrId | accessible-for-notify | current | Version of ospfPmVirtNbrRtrId used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.11 | ScalarospfTrapNmEntIndexValid | accessible-for-notify | current | Whether the trap was generated by OSPF-NM or not. |
| 1.3.6.1.4.1.629.10.3.3.1.12 | ScalarospfTrapNmEntIndex | accessible-for-notify | current | Version of ospfNmEntIndex used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.13 | ScalarospfTrapIfIpAddress | accessible-for-notify | current | Version of ospfPmIfIpAddress used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.14 | ScalarospfTrapAddressLessIf | accessible-for-notify | current | Version of ospfPmAddressLessIf used for traps. |
| 1.3.6.1.4.1.629.10.3.3.1.15 | ScalarospfTrapAreaId | accessible-for-notify | current | Version of ospfPmAreaId used for traps. |
| 1.3.6.1.4.1.629.10.3.3.2 | NodeospfTrapConformance | |||
| 1.3.6.1.4.1.629.10.3.3.2.1 | NodeospfTrapGroups | |||
| 1.3.6.1.4.1.629.10.3.3.2.1.1 | GroupospfTrapEventGroup | current | A grouping of OSPF trap events, as specified in NOTIFICATION-TYPE constructs. | |
| 1.3.6.1.4.1.629.10.3.3.2.1.2 | GroupospfTrapControlGroup | current | A grouping of objects required for OSPF traps. | |
| 1.3.6.1.4.1.629.10.3.3.2.2 | NodeospfTrapCompliances | |||
| 1.3.6.1.4.1.629.10.3.3.2.2.1 | ComplianceospfTrapCompliance | obsolete | The compliance statement. | |
| 1.3.6.1.4.1.629.10.3.3.2.2.2 | ComplianceospfTrapCompliance2 | current | The compliance statement. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AreaID | IpAddress | current | An OSPF Area Identifier. |
| BigMetric | Integer32 (0..'FFFFFF'h) | current | The OSPF External Metric. |
| DesignatedRouterPriority | Integer32 (0..'FF'h) | current | The values defined for the priority of a system for becoming the designated router. |
| FastHelloMultiplierRange | Integer32 (3..20) | current | The range of hello multipliers that determine how often Fast Hellos are exchanged. |
| HelloRange | Integer32 (1..'FFFF'h) | current | The range of intervals on which hello messages are exchanged. |
| Metric | Integer32 (0..'FFFF'h) | current | The OSPF Internal Metric. |
| OspfAggLsTypes | INTEGER { lsSummaryLink(3), lsNssaExternalLink(7) } | current | OSPF LSA types aggregated across area boundaries. |
| OspfAggregateEffects | INTEGER { effectAdvertiseMatching(1), effectDoNotAdvertiseMatching(2) } | current | Determines whether an area aggregate should be advertised. |
| OspfAreaLsTypes | INTEGER { lsRouterLink(1), lsNetworkLink(2), lsSummaryLink(3), lsAsSummaryLink(4), lsMulticastLink(6), lsNssaExternalLink(7), lsAreaOpaqueLink(10) } | current | OSPF area-scope LSA types. |
| OspfAuthTypes | INTEGER { authNone(0), authSimplePassword(1), authMd5(2), authHmacSha1(3), authHmacSha256(4), authHmacSha384(5), authHmacSha512(6) } | current | OSPF authentication type. |
| OspfDesignatedRtrState | INTEGER { designatedOther(0), designatedRouter(1), backupDesignatedRouter(2) } | current | Designated router states. |
| OspfExtLsTypes | INTEGER { lsExternalLink(5), lsExternalOpaqueLink(11) } | current | OSPF external-scope LSA types. |
| OspfHelperModePolicy | BITS { helpPolicyUnknown(0), helpPolicySoftware(1), helpPolicyReload(2), helpPolicySwitch(3) } | current | Bit flags used in the bit field that determines whether OSPF helps a router attempting hitless restart for a certain restart reason. |
| OspfHitlessRestartReasons | INTEGER { reasonUnknown(0), reasonSoftwareRestart(1), reasonSoftwareReload(2), reasonSwitchToBackup(3) } | current | OSPF reasons for Hitless Restart. |
| OspfImportTypes | INTEGER { importExternal(1), importNoExternal(2), importNssa(3) } | current | OSPF import type. This determines whether an area should import externals. |
| OspfInterfaceStates | INTEGER { ifDown(1), ifLoopback(2), ifWaiting(3), ifPointToPoint(4), ifDesignatedRouter(5), ifBackupDesignatedRouter(6), ifOtherDesignatedRouter(7), ifStandby(8) } | current | OSPF Interface State. |
| OspfLinkLsTypes | INTEGER { lsLinkOpaqueLink(9) } | current | OSPF link-local-scope LSA types. |
| OspfMetricTypes | INTEGER { metricStandard(1), metricComparableCost(2), metricNonComparable(3) } | current | OSPF Metric type. |
| OspfMulticastFwardTypes | INTEGER { multicastBlocked(1), multicast(2), multicastUnicast(3) } | current | OSPF Multicast forwarding types. |
| OspfNbrPermanence | INTEGER { permDynamic(1), permPermanent(2) } | current | OSPF Neighbor Permanence. |
| OspfNeighborStates | INTEGER { nbrDown(1), nbrAttempt(2), nbrInit(3), nbrTwoWay(4), nbrExchangeStart(5), nbrExchange(6), nbrLoading(7), nbrFull(8) } | current | OSPF Neighbor State. |
| OspfNetworkTypes | INTEGER { networkUndefined(0), networkBroadcast(1), networkNbma(2), networkPointToPoint(3), networkPointToMultipoint(5), networkLoopback(10) } | current | OSPF Network type. |
| OspfPathType | INTEGER { pathTypeNone(0), pathTypeIntraArea(1), pathTypeInterArea(2), pathTypeType1Ext(3), pathTypeType2Ext(4) } | current | OSPF path types. |
| OspfPmAdminStatus | INTEGER { adminStatusUp(1), adminStatusDown(2) } | current | The desired administrative state of an OSPF Protocol Manager entity. |
| OspfPmEntPrivateDataType | OCTET STRING (SIZE (0..128)) | current | Represents private data field. |
| OspfPmIfLinkProtValue | BITS { linkUnused0(0), linkUnused1(1), linkUnused2(2), linkUnused3(3), linkUnused4(4), linkUnused5(5), linkUnused6(6), linkUnused7(7), linkUnused8(8), linkUnused9(9), linkUnused10(10), linkUnused11(11), linkUnused12(12), linkUnused13(13), linkUnused14(14), linkUnused15(15), linkUnused16(16), linkUnused17(17), linkUnused18(18), linkUnused19(19), linkUnused20(20), linkUnused21(21), linkUnused22(22), linkUnused23(23), linkExtraTraffic(24), linkUnprotected(25), linkShared(26), linkDedicated1To1(27), linkDedicated1Plus1(28), linkEnhanced(29) } | current | Value denoting the protection capabilities of the interface. Named bits must be numbered contiguously starting at zero. The allowable values for the protection values start at bit 24. We therefore define bits linkUnused… |
| OspfPmIfSwitchCapValue | INTEGER { ifPacketSwitchCapable1(1), ifPacketSwitchCapable2(2), ifPacketSwitchCapable3(3), ifPacketSwitchCapable4(4), ifLayer2SwitchCapable(51), ifTDMCapable(100), ifLambdaSwitchCapable(150), ifFiberSwitchCapable(200) } | current | Value indicating the switching capabilities of the interface. |
| OspfPmIfSwitchEncodingValue | INTEGER { ifPacketCapable(1), ifEthernetCapable(2), ifAnsiEtsiPdhCapable(3), ifSdhSonetCapable(5), ifDigWrapperCapable(7), ifLambdaCapable(8), ifFiberCapable(9), ifFiberChannelCapable(11) } | current | The type of encoding used on this interface. |
| OspfPmIfSwitchSonetSdhValue | INTEGER { ifSonetSdhStandard(0), ifSonetSdhArbitrary(1) } | current | The SONET or SDH support on this interface. |
| OspfPmIndex | Unsigned32 | current | The index value identifying an OSPF entity. |
| OspfPmInterfaceId | INTEGER { ifIpSockets(1), ifIfInfo(2), ifRteProtInput(3) } | current | The type of interface to which a join applies. |
| OspfPmMjStatus | INTEGER { mjNotJoined(1), mjSentAddJoin(2), mjSentRegister(3), mjJoinActive(4), mjSentDelJoin(5), mjSentUnregister(6), mjJoinGone(7), mjFailedToRegister(8), mjFailingOver(9), mjFailed(10) } | current | The status of a Master Join. |
| OspfPmOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of an OSPF Protocol Manager entity. |
| OspfPmSjStatus | INTEGER { sjNotJoined(1), sjJoined(2), sjJoinActive(3), sjJoinUnreg(4), sjJoinGone(5), sjFailingOver(6), sjFailed(7) } | current | The status of a Slave Join. |
| OspfPmSlaveInterfaceId | INTEGER { ifCspfInterface(1), ifNmInterface(2), ifPdiInterface(3) } | current | The type of interface to which a slave join applies. |
| OspfRestartExitReason | INTEGER { none (1), inProgress (2), completed (3), timedOut (4), topologyChanged (5) } | current | The reason for exiting an attempted graceful restart. |
| OspfRestartHelperStatus | INTEGER { notHelping(1), helping(2) } | current | Indicates whether the router is acting as a hitless restart helper for a neighbor. |
| OspfShamConflictFlags | BITS { shamConflictIf(0), shamConflictHost(1), shamConflictRtm(2), shamConflictStable(3) } | current | Bit flags indicating conflicts between local sham link endpoint addresses and addresses advertized into OSPF. |
| OspfSummaryTypes | INTEGER { summNoAreaSummary(1), summSendAreaSummary(2) } | current | Determines whether an area border router should advertise inter-area routes into this area. |
| OspfTransRoles | INTEGER { roleAlways(1), roleCandidate(2) } | current | Determines whether this router should always perform NSSA translation or only when elected. |
| OspfTransStates | INTEGER { stateEnabled(1), stateElected(2), stateDisabled(3) } | current | Determines whether this router is performing NSSA translation. |
| OspfVersionNumber | INTEGER { version2(2) } | current | OSPF version number. |
| PositiveInteger | Integer32 (0..'7FFFFFFF'h) | current | A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues. |
| RouterID | IpAddress | current | An OSPF Router Identifier. |
| TOSType | Integer32 (0..30) | current | Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB + | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | + IP TOS IP TOS Field Policy Field Policy Contents… |
| UpToMaxAge | Integer32 (0..3600) | current | The values that one might find or configure for variables bounded by the maximum age of an LSA. |
| UpToRefreshInterval | Integer32 (1..1800) | current | The values configurable for variables bounded by the Refresh Interval. |