DC-PIM-MIB
465 objects
The MIB module for management of the DC-PIM product. This is closely based on the standard IETF PIM MIB, defined in draft-ietf-pim-mib-v2-03.
Imported Objects
| DC-MASTER-TC | AdminStatus BfdSessionStatus ExtAccessListListIndexOrZero L2BridgeDomainType NpgOperStatus NumericIndex NumericIndexOrZero StdAccessListListIndexOrZero |
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetVersion |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.2.826.42.1.1578918.5.71.1 | IdentitydcPimMIB | The MIB module for management of the DC-PIM product. This is closely based on the standard IETF PIM MIB, defined in draft-ietf-pim-mib-v2-03. | ||
| 1.2.826.42.1.1578918.5.71.1.1 | NodepimMIBObjects | |||
| 1.2.826.42.1.1578918.5.71.1.1.0 | NodepimTraps | |||
| 1.2.826.42.1.1578918.5.71.1.1.0.1 | NotificationpimNeighborLoss | current | A pimNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no… | |
| 1.2.826.42.1.1578918.5.71.1.1.0.2 | NotificationpimInterfaceStateChange | current | A pimInterfaceStateChange trap signifies that the OperStatus of the interface has changed. - If the reported OperStatus is operStatusDown, the interface is in … | |
| 1.2.826.42.1.1578918.5.71.1.1.1 | NodepimTables | |||
| 1.2.826.42.1.1578918.5.71.1.1.1.1 | TablepimInterfaceTable | not-accessible | current | This table is used to create and manage the {interface, IP version} pairs for which PIM is enabled. When the entity is running MGMD Snooping or Proxy (but not … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1 | RowpimInterfaceEntry | not-accessible | current | An entry (conceptual row) in the pimInterfaceTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.1 | ColumnpimInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.2 | ColumnpimInterfaceIPVersion | not-accessible | current | The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, for example IPv4 and IPv6, but the traffic is cons… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.3 | ColumnpimInterfaceAddressType | read-only | current | The address type of this PIM interface. DC-PIM returns the same entry for this object as for the pimInterfaceIPVersion object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.4 | ColumnpimInterfaceAddress | read-only | current | The primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.5 | ColumnpimInterfaceNetMaskLength | read-only | current | The network mask length for the primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. A … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.6 | ColumnpimInterfaceDR | read-only | current | The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. This field is ignore… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.7 | ColumnpimInterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM an… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.8 | ColumnpimInterfaceTrigHelloInterval | read-create | current | The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Triggered_Hello_Delay' timer value d… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.9 | ColumnpimInterfaceJoinPruneInterval | read-create | current | The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.11 | ColumnpimInterfaceHelloHoldtime | read-create | current | The value set in the Holdtime field of PIM Hello messages transmitted on this interface, that is, the amount of time a receiver must consider the neighbor reac… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.12 | ColumnpimInterfaceJoinPruneHoldtime | read-create | current | The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface, that is, the amount of time a receiver must keep the Join/Prune … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.14 | ColumnpimInterfacePropagationDelay | read-create | current | The value this router inserts into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface, that is, the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.15 | ColumnpimInterfaceOverrideInterval | read-create | current | The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface, that is, the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.17 | ColumnpimInterfaceGenerationIDValue | read-only | current | The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface, that is, an arbitrary value which allows PIM neigh… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.19 | ColumnpimInterfaceDRPriority | read-create | current | The Designated Router Priority value inserted into the DR Priority option on this interface. If all routers on the interface include the DR Priority option in … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.20 | ColumnpimInterfaceLanDelayEnabled | read-only | current | Evaluates to 'true' if all routers on this interface are using the LAN Prune Delay option. This field is ignored if pimTmEntMgmdProxy is set to 'true'. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.21 | ColumnpimInterfaceEffectPropagDelay | read-only | current | The Effective Propagation Delay on this interface. This object is always 500 if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEntMgmdPr… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.22 | ColumnpimInterfaceEffectOverrideIvl | read-only | current | The Effective Override Interval on this interface. This object is always 2500 if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEntMgmdP… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.23 | ColumnpimInterfaceSuppressionEnabled | read-only | current | Whether join suppression is enabled on this interface. This object is always 'true' if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEn… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.24 | ColumnpimInterfaceBidirCapable | read-only | current | Evaluates to 'true' if all routers on this interface are using the Bidirectional-PIM Capable option. This field is ignored if pimTmEntMgmdProxy is set to 'true… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.25 | ColumnpimInterfaceDRPriorityEnabled | read-only | current | Evaluates to 'true' if all routers on this interface are using the DR Priority option. This field is only relevant for PIM-SM, but DC-PIM evaluates it from rec… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.27 | ColumnpimInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. All writeable objects in this en… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.28 | ColumnpimInterfaceGraftRetryInterval | read-create | current | The minimum interval that must transpire between two successive Graft(S,G) messages sent by a router. This object corresponds to the 'Graft_Retry_Period' timer… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.29 | ColumnpimInterfaceSRAllCapable | read-only | current | Evaluates to 'true' if all routers on this interface are using the State Refresh option. This field is only relevant to PIM-DM. It is always 'false' if either … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.51 | ColumnpimInterfaceAdminStatus | read-create | current | The desired administrative state of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.52 | ColumnpimInterfaceOperStatus | read-only | current | The current operational state of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.53 | ColumnpimInterfaceStubInterface | read-create | current | Whether this interface is a 'stub interface' with regard to PIM. If this is set to 'true', no PIM packets are sent or processed (if received) on this interface… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.54 | ColumnpimInterfaceP2PNoHellos | read-create | current | Whether this interface is a point-to-point interface on which we do not require the neighbor to send PIM-Hello signals. Provided for back-compatibility with so… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.55 | ColumnpimInterfaceMgmdEntIndex | read-create | current | The HAF entity index of the DC-MGMD (for example, for IPv4 this is DC-IGMP) Router component that owns this interface. Zero is a wildcard value meaning that no… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.56 | ColumnpimInterfaceNeighborCount | read-only | current | The number of PIM neighbors on this interface. This field is ignored if pimTmEntMgmdProxy is set to 'true'. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.57 | ColumnpimInterfaceStarGStateLimit | read-create | current | The maximum number of groups for which DC-PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.58 | ColumnpimInterfaceStarGStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of ze… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.59 | ColumnpimInterfaceStarGStateStored | read-only | current | The number of groups for which DC-PIM TIB Manager is storing (*,G,I) state specific to this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.60 | ColumnpimInterfaceSGStateLimit | read-create | current | The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means th… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.61 | ColumnpimInterfaceSGStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.62 | ColumnpimInterfaceSGStateStored | read-only | current | The number of {source, group} pairs for which DC-PIM TIB Manager is storing (S,G,I) state specific to this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.63 | ColumnpimInterfaceUseNeighborFilter | read-create | current | Setting this object to 'true' enables the neighbor filter specified by pimInterfaceNeighborFilter. This field is ignored if pimTmEntMgmdProxy is set to 'true'. |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.64 | ColumnpimInterfaceNeighborFilter | read-create | current | When neighbor filtering is enabled (that is, when pimInterfaceUseNeighborFilter is 'true'), the local router will process link-local multicast PIM messages rec… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.65 | ColumnpimInterfaceAssertInterval | read-create | current | The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' minus… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.66 | ColumnpimInterfaceAssertHoldtime | read-create | current | The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object cor… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.67 | ColumnpimInterfaceDomainBorder | read-create | current | Whether or not this interface is a PIM domain border. The effect of being a PIM domain border interface is to disable the BSR protocol, thus allowing each PIM … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.68 | ColumnpimInterfaceUseAsmGrpFilter | read-create | current | Setting this object to 'true' enables the PIM-SM ASM and BIDIR-PIM group filter specified by pimInterfaceAsmGrpFilter. This field is only relevant for PIM-SM a… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.69 | ColumnpimInterfaceAsmGrpFilter | read-create | current | When PIM-SM ASM / BIDIR-PIM group filtering is enabled (that is, when pimInterfaceUseAsmGrpFilter is 'true'), then for groups in the PIM-SM ASM and BIDIR-PIM s… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.70 | ColumnpimInterfaceUseSsmSrcAndGrpFilt | read-create | current | Setting this object to 'true' enables the SSM source and group filter specified by pimInterfaceSsmSrcAndGrpFilter. This field is only relevant for PIM-SM. It i… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.71 | ColumnpimInterfaceSsmSrcAndGrpFilter | read-create | current | When SSM source and group filtering is enabled (that is, when pimInterfaceUseSsmSrcAndGrpFilt is 'true'), then for groups in the SSM space the local router wil… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.72 | ColumnpimInterfaceSiteName | read-only | current | Site name corresponding to the remote endpoint of the PIM interface |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.73 | ColumnpimInterfaceIfName | read-only | current | Name of the interface |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.74 | ColumnpimInterfaceDFElectionRobustness | read-create | current | The number of times that the local router sends copies of the same DF Offer or DF Winner message. This object corresponds to the 'Election_Robustness' value de… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.75 | ColumnpimInterfaceDFElectionOfferIvl | read-create | current | The interval between resends of the same DF message, prior to subtracting a random amount of jitter. This object corresponds to the 'Offer_Period' value define… |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.76 | ColumnpimInterfaceDFElectionBackoffIvl | read-create | current | The interval that the acting DF waits after learning of an MRIB change, before passing the role to the best neighboring router. This object corresponds to the … |
| 1.2.826.42.1.1578918.5.71.1.1.1.1.1.77 | ColumnpimInterfaceBfdDesired | read-create | current | Indicates the type of Bidirectional Forwarding Detection (BFD) support desired on this interface. This field is ignored if pimInterfaceP2PNoHellos is set to 't… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2 | TablepimNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. This table is not used for MGMD Snooping or Proxy. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1 | RowpimNeighborEntry | not-accessible | current | An entry (conceptual row) in the pimNeighborTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.1 | ColumnpimNeighborIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.2 | ColumnpimNeighborAddressType | not-accessible | current | The address type of this PIM neighbor. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.3 | ColumnpimNeighborAddress | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.4 | ColumnpimNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.5 | ColumnpimNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.6 | ColumnpimNeighborLanPruneDelayPresent | read-only | current | Evaluates to 'true' if this neighbor is using the LAN Prune Delay option. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.7 | ColumnpimNeighborPropagationDelay | read-only | current | The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor, that is, the expected propagation delay on the link. This o… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.8 | ColumnpimNeighborOverrideInterval | read-only | current | The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor, that is, the preferred maximum value of the randomized inte… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.9 | ColumnpimNeighborTBit | read-only | current | Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppressio… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.10 | ColumnpimNeighborGenerationIDPresent | read-only | current | Evaluates to 'true' if this neighbor is using the Generation ID option. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.11 | ColumnpimNeighborGenerationIDValue | read-only | current | The value of the Generation ID from the last PIM Hello message received from this neighbor, that is, an arbitrary value which allows other PIM routers to detec… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.12 | ColumnpimNeighborBidirCapable | read-only | current | Evaluates to 'true' if this neighbor is using the Bidirectional-PIM Capable option. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.13 | ColumnpimNeighborDRPriorityPresent | read-only | current | Evaluates to 'true' if this neighbor is using the DR Priority option. |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.14 | ColumnpimNeighborDRPriority | read-only | current | The value of the Designated Router Priority from the last PIM Hello message received from this neighbor, that is, the administrative preference for this neighb… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.16 | ColumnpimNeighborSRCapable | read-only | current | Evaluates to TRUE if this neighbor is using the State Refresh Capable option. State Refresh capability is not relevant for bidir or sparse-mode groups. However… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.17 | ColumnpimNeighborHoldTime | read-only | current | The value of the Holdtime field from the last PIM Hello message received from this neighbor, that is, a value in secs for which this neighbor should be kept al… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.18 | ColumnpimNeighborOperStatus | read-only | current | The status of the neighbor. This is Oper Status Up at all times that this neighbor row exists except for the following: - this neighor has been heard from over… |
| 1.2.826.42.1.1578918.5.71.1.1.1.2.1.19 | ColumnpimNeighborBfdStatus | read-only | current | The status of the BFD session to this neighbor. If BFD session support for the interface is set to 'none', this field always has a value of 'notRequired'. |
| 1.2.826.42.1.1578918.5.71.1.1.1.3 | TablepimNbrSecAddressTable | not-accessible | current | The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above). This ta… |
| 1.2.826.42.1.1578918.5.71.1.1.1.3.1 | RowpimNbrSecAddressEntry | not-accessible | current | An entry (conceptual row) in the pimNbrSecAddressTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.3.1.1 | ColumnpimNbrSecAddressIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.3.1.2 | ColumnpimNbrSecAddressType | not-accessible | current | The address type of this PIM neighbor. DC-PIM returns 'ipv4' or 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.3.1.3 | ColumnpimNbrSecAddressPrimary | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.3.1.4 | ColumnpimNbrSecAddress | read-only | current | The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4 | TablepimStarGTable | not-accessible | current | The (conceptual) table listing the non-interface specific (*,G) state that the entity maintains. This MIB table is not used for MGMD Snooping or PIM-DM, nor fo… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1 | RowpimStarGEntry | not-accessible | current | An entry (conceptual row) in the pimStarGTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.1 | ColumnpimStarGAddressType | not-accessible | current | The address type of this multicast group. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.2 | ColumnpimStarGGrpAddress | not-accessible | current | The multicast group address. The InetAddressType is given by the pimStarGAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.3 | ColumnpimStarGUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.4 | ColumnpimStarGPimMode | read-only | current | Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.5 | ColumnpimStarGRPAddressType | read-only | current | The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.6 | ColumnpimStarGRPAddress | read-only | current | The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the pimStarGRPAddressType. This object is zero if the RP address is unk… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.7 | ColumnpimStarGRPOrigin | read-only | current | The mechanism by which the RP for the group was learned. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.8 | ColumnpimStarGRPIsLocal | read-only | current | Whether the local router is the RP for the group. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.9 | ColumnpimStarGUpstreamJoinState | read-only | current | Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM and BIDIR-PIM s… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.10 | ColumnpimStarGUpstreamJoinTimer | read-only | current | The time remaining before the local router next sends a periodic (*,G) Join message on pimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer i… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.11 | ColumnpimStarGUpstreamNeighborType | read-only | current | The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor. DC-PIM returns 'ipv4', '… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.12 | ColumnpimStarGUpstreamNeighbor | read-only | current | The primary address of the neighbor on pimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.13 | ColumnpimStarGRPFIfIndex | read-only | current | The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown or the RP is local. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.14 | ColumnpimStarGRPFNextHopType | read-only | current | The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.15 | ColumnpimStarGRPFNextHop | read-only | current | The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) … |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.16 | ColumnpimStarGRPFRouteProtocol | read-only | current | The routing mechanism via which the route used to find the RPF interface towards the RP was learned. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.17 | ColumnpimStarGRPFRouteAddress | read-only | current | The IP address which when combined with the corresponding value of pimStarGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.18 | ColumnpimStarGRPFRoutePrefixLength | read-only | current | The prefix length which when combined with the corresponding value of pimStarGRPFRouteAddress identifies the route used to find the RPF interface towards the R… |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.19 | ColumnpimStarGRPFRouteMetricPref | read-only | current | The metric preference of the route used to find the RPF interface towards the RP. |
| 1.2.826.42.1.1578918.5.71.1.1.1.4.1.20 | ColumnpimStarGRPFRouteMetric | read-only | current | The routing metric of the route used to find the RPF interface towards the RP. |
| 1.2.826.42.1.1578918.5.71.1.1.1.5 | TablepimStarGITable | not-accessible | current | The (conceptual) table listing the interface-specific (*,G) state that the entity maintains. For MGMD Proxy or Snooping, or PIM-DM, (*,G,I) state exists only b… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1 | RowpimStarGIEntry | not-accessible | current | An entry (conceptual row) in the pimStarGITable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.1 | ColumnpimStarGIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.2 | ColumnpimStarGIPimMode | read-only | current | Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.3 | ColumnpimStarGIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.4 | ColumnpimStarGILocalMembership | read-only | current | Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_incl… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.5 | ColumnpimStarGIJoinPruneState | read-only | current | The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machin… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.6 | ColumnpimStarGIPrunePendingTimer | read-only | current | The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another … |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.7 | ColumnpimStarGIJoinExpiryTimer | read-only | current | The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification (RFC4601) a… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.8 | ColumnpimStarGIAssertState | read-only | current | The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification (RFC4601).… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.9 | ColumnpimStarGIAssertTimer | read-only | current | If pimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If pimSta… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.10 | ColumnpimStarGIAssertWinnerAddressType | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). DC-PIM returns 'ipv4', 'ipv6'… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.11 | ColumnpimStarGIAssertWinnerAddress | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimStarGIAssertWinnerAddressType obj… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.12 | ColumnpimStarGIAssertWinnerMetricPref | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is ze… |
| 1.2.826.42.1.1578918.5.71.1.1.1.5.1.13 | ColumnpimStarGIAssertWinnerMetric | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero.… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6 | TablepimSGTable | not-accessible | current | The (conceptual) table listing the non-interface specific (S,G) state that the entity maintains. This MIB table is not used for MGMD Snooping or MGMD Proxy (ex… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1 | RowpimSGEntry | not-accessible | current | An entry (conceptual row) in the pimSGTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.1 | ColumnpimSGAddressType | not-accessible | current | The address type of the source and multicast group for this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.2 | ColumnpimSGGrpAddress | not-accessible | current | The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.3 | ColumnpimSGSrcAddress | not-accessible | current | The source address for this entry. The InetAddressType is given by the pimSGAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.4 | ColumnpimSGUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.5 | ColumnpimSGPimMode | read-only | current | Whether pimSGGrpAddress is a PIM-SM SSM (Source Specific Multicast, used with PIM-SM), PIM-SM ASM (Any Source Multicast, used with PIM-SM), PIM-DM (dense mode)… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.6 | ColumnpimSGUpstreamJoinState | read-only | current | Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.7 | ColumnpimSGUpstreamJoinTimer | read-only | current | The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.8 | ColumnpimSGUpstreamNeighbor | read-only | current | The primary address of the neighbor on pimSGRPFIfIndex that is the local router's next hop neighbor towards the source. This is zero if the the RPF next hop is… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.9 | ColumnpimSGRPFIfIndex | read-only | current | The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.10 | ColumnpimSGRPFNextHopType | read-only | current | The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this obje… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.11 | ColumnpimSGRPFNextHop | read-only | current | The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.12 | ColumnpimSGRPFRouteProtocol | read-only | current | The routing mechanism via which the route used to find the RPF interface towards the source was learned. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.13 | ColumnpimSGRPFRouteAddress | read-only | current | The IP address which when combined with the corresponding value of pimSGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the so… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.14 | ColumnpimSGRPFRoutePrefixLength | read-only | current | The prefix length which when combined with the corresponding value of pimSGRPFRouteAddress identifies the route used to find the RPF interface towards the sour… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.15 | ColumnpimSGRPFRouteMetricPref | read-only | current | The metric preference of the route used to find the RPF interface towards the source. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.16 | ColumnpimSGRPFRouteMetric | read-only | current | The routing metric of the route used to find the RPF interface towards the source. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.17 | ColumnpimSGSPTBit | read-only | current | Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree. This field is only relevant for PIM-SM. It is ignored i… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.19 | ColumnpimSGDRRegisterState | read-only | current | Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Reg… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.20 | ColumnpimSGDRRegisterStopTimer | read-only | current | If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joi… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.22 | ColumnpimSGUpstreamPruneState | read-only | current | Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. … |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.23 | ColumnpimSGOriginatorState | read-only | current | Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specificat… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.24 | ColumnpimSGStateRefreshTimer | read-only | current | If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer … |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.25 | ColumnpimSGPruneLimitTimer | read-only | current | If pimSGUpstreamPruneState is 'pruned', this is the time remaining before the local router may send a Prune(S,G) message on pimSGRPFIfIndex. Otherwise, this is… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.26 | ColumnpimSGLocalMsdpAdv | read-only | current | Whether there is an active local data flow for this (S,G) that has been advertised to an MSDE partner. This field is only relevant for PIM-SM. It is always 'fa… |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.27 | ColumnpimSGMsdpRemoteDataAct | read-only | current | Whether there is an active remote data flow for this (S,G) that has been advertised into DC-PIM by an MSDE partner. This field is only relevant for PIM-SM. It … |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.28 | ColumnpimSGJoinSPT | read-only | current | Whether DC-PIM is attempting to join to the shortest-path tree for this (S,G). This field is only relevant for PIM-SM. |
| 1.2.826.42.1.1578918.5.71.1.1.1.6.1.29 | ColumnpimSGRPBit | read-only | current | Whether this (S,G) state points towards the RP. For example if DC-PIM has received Join(*,G)s from two downstream routers A and B, and then receives a Prune(S,… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7 | TablepimSGITable | not-accessible | current | The (conceptual) table listing the interface-specific (S,G) state that the entity maintains. For MGMD Proxy or Snooping, (S,G,I) state exists only because of l… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1 | RowpimSGIEntry | not-accessible | current | An entry (conceptual row) in the pimSGITable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.1 | ColumnpimSGIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.2 | ColumnpimSGIPimMode | read-only | current | Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.3 | ColumnpimSGIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.4 | ColumnpimSGILocalMembership | read-only | current | Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMPv3 or MLDv2). This corresponds to local_receiver_… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.5 | ColumnpimSGIJoinPruneState | read-only | current | The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machin… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.6 | ColumnpimSGIPrunePendingTimer | read-only | current | The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.7 | ColumnpimSGIJoinExpiryTimer | read-only | current | The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification (RFC4601). … |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.8 | ColumnpimSGIAssertState | read-only | current | The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM and PIM-DM specification… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.9 | ColumnpimSGIAssertTimer | read-only | current | If pimSGIAssertState is 'iAmAssertWinner', for a PIM-SM group this is the time remaining before the local router next sends a (S,G) Assert message on this inte… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.10 | ColumnpimSGIAssertWinnerAddressType | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). DC-PIM returns 'ipv4', 'ipv6' or… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.11 | ColumnpimSGIAssertWinnerAddress | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimSGIAssertWinnerAddressType object. T… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.12 | ColumnpimSGIAssertWinnerMetricPref | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is z… |
| 1.2.826.42.1.1578918.5.71.1.1.1.7.1.13 | ColumnpimSGIAssertWinnerMetric | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero… |
| 1.2.826.42.1.1578918.5.71.1.1.1.8 | TablepimSGRptTable | not-accessible | current | The (conceptual) table listing the non-interface specific (S,G,rpt) state that the entity maintains. This MIB table is not used for MGMD Snooping or PIM-DM or … |
| 1.2.826.42.1.1578918.5.71.1.1.1.8.1 | RowpimSGRptEntry | not-accessible | current | An entry (conceptual row) in the pimSGRptTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.8.1.1 | ColumnpimSGRptSrcAddress | not-accessible | current | The source address for this entry. The InetAddressType is given by the pimStarGAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.8.1.2 | ColumnpimSGRptUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.8.1.3 | ColumnpimSGRptUpstreamPruneState | read-only | current | Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages … |
| 1.2.826.42.1.1578918.5.71.1.1.1.8.1.4 | ColumnpimSGRptUpstreamOverrideTimer | read-only | current | The time remaining before the local router sends a triggered (S,G,rpt) Join message on pimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override… |
| 1.2.826.42.1.1578918.5.71.1.1.1.9 | TablepimSGRptITable | not-accessible | current | The (conceptual) table listing the interface-specific (S,G,rpt) state that the entity maintains. For MGMD Proxy or Snooping, or PIM-DM or BIDIR-PIM, (S,G,I,rpt… |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1 | RowpimSGRptIEntry | not-accessible | current | An entry (conceptual row) in the pimSGRptITable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.1 | ColumnpimSGRptIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.2 | ColumnpimSGRptIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.3 | ColumnpimSGRptILocalMembership | read-only | current | Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMPv… |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.4 | ColumnpimSGRptIJoinPruneState | read-only | current | The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) stat… |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.5 | ColumnpimSGRptIPrunePendingTimer | read-only | current | The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM spe… |
| 1.2.826.42.1.1578918.5.71.1.1.1.9.1.6 | ColumnpimSGRptIPruneExpiryTimer | read-only | current | The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification (… |
| 1.2.826.42.1.1578918.5.71.1.1.1.11 | TablepimStaticRPTable | not-accessible | current | This table is used to create and manage static configuration of RPs and group ranges. If the group prefixes configured for two or more rows in this table overl… |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1 | RowpimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the pimStaticRPTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.1 | ColumnpimStaticRPAddressType | not-accessible | current | The address type of this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.2 | ColumnpimStaticRPGrpAddress | not-accessible | current | The multicast group address which, when combined with pimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the pi… |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.3 | ColumnpimStaticRPGrpPrefixLength | not-accessible | current | The multicast group prefix length, which, when combined with pimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the … |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.4 | ColumnpimStaticRPRPAddress | read-create | current | The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPAddressType object. This field can only… |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.5 | ColumnpimStaticRPPimMode | read-create | current | The PIM mode to be used for groups in this group prefix. DC-PIM does not support the value 'other' for this object. If this object is set to 'ssm', 'dense' or … |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.6 | ColumnpimStaticRPOverrideSubranges | read-create | current | Whether this static RP configuration will override other RP information learned for groups in this group prefix. If this object is TRUE, then this object will … |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.8 | ColumnpimStaticRPRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before a valid value has been w… |
| 1.2.826.42.1.1578918.5.71.1.1.1.11.1.51 | ColumnpimStaticRPAdminStatus | read-create | current | The desired administrative state of this row. |
| 1.2.826.42.1.1578918.5.71.1.1.1.12 | TablepimAnycastRPSetTable | not-accessible | current | This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entri… |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1 | RowpimAnycastRPSetEntry | not-accessible | current | An entry corresponds to a single remote router within a particular Anycast-RP set. |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.1 | ColumnpimAnycastRPSetAddressType | not-accessible | current | The address type of the Anycast-RP address and router address. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.2 | ColumnpimAnycastRPSetAnycastAddress | not-accessible | current | The Anycast-RP address. The InetAddressType is given by the pimAnycastRPSetAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.3 | ColumnpimAnycastRPSetRouterAddress | not-accessible | current | The address of a router that is a member of the Anycast-RP set. This must not be the same as pimAnycastRPSetAnycastAddress. The InetAddressType is given by the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.4 | ColumnpimAnycastRPSetRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. All writeable objects in this entry can be modified when the status of this e… |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.5 | ColumnpimAnycastRPSetLocalRouter | read-only | current | Whether this entry corresponds to the local router. |
| 1.2.826.42.1.1578918.5.71.1.1.1.12.1.51 | ColumnpimAnycastRPSetAdminStatus | read-create | current | The desired administrative state of this row. |
| 1.2.826.42.1.1578918.5.71.1.1.1.13 | TablepimGroupMappingTable | not-accessible | current | The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1 | RowpimGroupMappingEntry | not-accessible | current | An entry (conceptual row) in the pimGroupMappingTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.1 | ColumnpimGroupMappingOrigin | not-accessible | current | The mechanism by which this group mapping was learned. |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.2 | ColumnpimGroupMappingAddressType | not-accessible | current | The address type of the IP multicast group prefix. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.3 | ColumnpimGroupMappingGrpAddress | not-accessible | current | The IP multicast group address which, when combined with pimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given … |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.4 | ColumnpimGroupMappingGrpPrefixLength | not-accessible | current | The multicast group prefix length, which, when combined with pimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given b… |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.6 | ColumnpimGroupMappingRPAddress | not-accessible | current | The IP address of the RP to be used for groups within this group prefix, or zero if no RP is to be used or if the RP address is unknown. The InetAddressType is… |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.7 | ColumnpimGroupMappingPimMode | read-only | current | The PIM mode to be used for groups in this group prefix. |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.8 | ColumnpimGroupMappingPrecedence | read-only | current | The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.13.1.51 | ColumnpimGroupMappingIsInactive | read-only | current | Flag indicating whether this Group Mapping is currently inactive. If this flag is set to 'true' then this row is not currently in use - no group addresses will… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14 | TablepimNbrStatsTable | not-accessible | current | This table lists the statistics for PIM neighbors. Note that if a neighbor's Liveness Timer expires (including on receipt of a PIM Hello message with a zero Ho… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1 | RowpimNbrStatsEntry | not-accessible | current | An entry (conceptual row) in the pimNbrStatsTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.1 | ColumnpimNbrStatsNumRecvHello | read-only | current | The number of valid PIM Hello messages that have been received from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.2 | ColumnpimNbrStatsNumRecvJoinPrune | read-only | current | The number of valid PIM Join/Prune messages that have been received from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.3 | ColumnpimNbrStatsNumRecvAssert | read-only | current | The number of valid PIM Assert messages that have been received from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.4 | ColumnpimNbrStatsNumRecvBSM | read-only | current | The number of valid PIM Bootstrap messages that have been received from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.5 | ColumnpimNbrStatsNumErrJoinPrune | read-only | current | The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note that this does not include messages for which… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.6 | ColumnpimNbrStatsNumErrAssert | read-only | current | The number of PIM Assert messages that have been received from this neighbor that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.7 | ColumnpimNbrStatsNumErrBSM | read-only | current | The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.12 | ColumnpimNbrStatsNumRecvGraft | read-only | current | The number of Graft messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft mes… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.13 | ColumnpimNbrStatsNumErrGraft | read-only | current | The number of badly formatted Graft messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.14 | ColumnpimNbrStatsNumRecvGraftAck | read-only | current | The number of Graft Ack messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.15 | ColumnpimNbrStatsNumErrGraftAck | read-only | current | The number of badly formatted Graft Ack messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.16 | ColumnpimNbrStatsNumRecvStateRefresh | read-only | current | The number of State Refresh messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, or the TM entity is configured not to s… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.17 | ColumnpimNbrStatsNumErrStateRefresh | read-only | current | The number of badly formatted State Refresh messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode, or the T… |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.18 | ColumnpimNbrStatsNumRecvDFElection | read-only | current | The number of DF election messages which have been received from this neighbor. If 'bidir' is clear for pimTmEntMode, this count will be zero. Any received DF … |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.19 | ColumnpimNbrStatsNumErrDFElection | read-only | current | The number of badly formatted DF election messages received from this neighbor. This count is incremented even if 'bidir' is clear for pimTmEntMode. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.20 | ColumnpimNbrStatsNumRecvJoinedSrcs | read-only | current | The total number of joined sources that have been received in valid PIM Join/Prune messages from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.14.1.21 | ColumnpimNbrStatsNumRecvPrunedSrcs | read-only | current | The total number of pruned sources that have been received in valid PIM Join/Prune messages from this neighbor. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15 | TablepimIfStatsTable | not-accessible | current | This table lists the statistics for {interface, IP version} pairs for which PIM is enabled. Note that any messages filtered out by pimInterfaceNeighborFilter d… |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1 | RowpimIfStatsEntry | not-accessible | current | An entry (conceptual row) in the pimIfStatsTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.1 | ColumnpimIfStatsNumSentHello | read-only | current | The number of PIM Hello messages that have been sent out this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.2 | ColumnpimIfStatsNumSentJoinPrune | read-only | current | The number of PIM Join/Prune messages that have been sent out this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.3 | ColumnpimIfStatsNumSentAssert | read-only | current | The number of PIM Assert messages that have been sent out this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.4 | ColumnpimIfStatsNumSentBsm | read-only | current | The number of PIM Bootstrap Router messages that have been sent out this interface. DC-PIM always multicasts this type of message. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.5 | ColumnpimIfStatsNumErrHello | read-only | current | The number of PIM Hello messages that have been received on this interface that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.6 | ColumnpimIfStatsNumRecvUnknownNbr | read-only | current | The number of PIM Join/Prune, Assert, DF Election, and multicast Bootstrap Router messages that have been received on this interface from a neighbor from which… |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.7 | ColumnpimIfStatsNumUnknownHelloOpt | read-only | current | The number of unknown options that have been received in PIM Hello messages on this interface. This value will include any PIM Hellos received with the known C… |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.8 | ColumnpimIfStatsNumFilteredOut | read-only | current | The number of link-local multicast PIM messages filtered out by pimInterfaceNeighborFilter on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.12 | ColumnpimIfStatsNumSentGraft | read-only | current | The number of Graft messages which have been sent out of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.13 | ColumnpimIfStatsNumSentGraftAck | read-only | current | The number of Graft Ack messages which have been sent out of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.14 | ColumnpimIfStatsNumSentStateRefresh | read-only | current | The number of State Refresh messages which have been sent out of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.15 | ColumnpimIfStatsNumSentDFElection | read-only | current | The number of DF election messages which have been sent out of this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.16 | ColumnpimIfStatsNumRecvHello | read-only | current | The number of valid PIM Hello messages that have been received on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.17 | ColumnpimIfStatsNumRecvJoinPrune | read-only | current | The number of valid PIM Join/Prune messages that have been received on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.18 | ColumnpimIfStatsNumRecvAssert | read-only | current | The number of valid PIM Assert messages that have been received on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.19 | ColumnpimIfStatsNumRecvUnknownType | read-only | current | The number of PIM messages with an unknown PIM message type that have been received on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.20 | ColumnpimIfStatsNumRecvBadChecksum | read-only | current | The number of PIM messages with a incorrect PIM checksum that have been received on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.21 | ColumnpimIfStatsTimeToNxtHello | read-only | current | The time (in milliseconds) until the next Hello message is sent on this interface if the Hello timer is running, or zero otherwise. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.22 | ColumnpimIfStatsNumSentJoinedSrcs | read-only | current | The total number of joined sources that have been sent in PIM Join/Prune messages on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.15.1.23 | ColumnpimIfStatsNumSentPrunedSrcs | read-only | current | The total number of pruned sources that have been sent in PIM Join/Prune messages on this interface. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16 | TablepimNmEntTable | not-accessible | current | This table is used to create and manage DC-PIM Neighbor Manager entities. There is no reason to create rows in this table if pimTmEntMode is always set to 'mgm… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1 | RowpimNmEntEntry | not-accessible | current | Each entry represents an instance of the DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.1 | ColumnpimNmEntIndex | not-accessible | current | The index of this pimNmEntEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.2 | ColumnpimNmEntRowStatus | read-create | current | Used to create and delete a DC-PIM Neighbor Manager Entity Table entry. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.3 | ColumnpimNmEntAdminStatus | read-create | current | The desired administrative state of the DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.4 | ColumnpimNmEntOperStatus | read-only | current | The current operational state of the DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.5 | ColumnpimNmEntTmEntIndex | read-create | current | The HAF entity index value of the DC-PIM TIB Manager to join to. Once set, the value of this object cannot be changed. |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.6 | ColumnpimNmEntI3JoinOperStatus | read-only | current | The current operational state of the I3 join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cann… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.7 | ColumnpimNmEntNmiJoinOperStatus | read-only | current | The current operational state of the NMI join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and can… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.8 | ColumnpimNmEntSckJoinOperStatus | read-only | current | The current operational state of the SCK join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and can… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.9 | ColumnpimNmEntClearStatsCounters | read-create | current | Set this object to 'true' to cause DC-PIM Neighbor Manager to reset all its statistics counters (that is, all objects with syntax PimStatsCounter that are eith… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.10 | ColumnpimNmEntStatsUpTime | read-only | current | The time since the statistics counters were last reset, either by establishing the NMI join (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.11 | ColumnpimNmEntEnableUnicastMessages | read-create | current | Set this object to 'true' to enable DC-PIM Neighbor Manager to send and receive unicast PIM messages. This object must only be set to 'false' if the local rout… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.12 | ColumnpimNmEntAcceptUnicastBsms | read-create | current | Set this object to 'true' to enable DC-PIM Neighbor Manager to accept PIM Bootstrap Messages (BSMs) which are sent to DC-PIM as unicast messages. Setting the o… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.13 | ColumnpimNmEntCrpAdvFilterIndex | read-create | current | Set this object to zero to disable Candidate-RP Advertisement filtering. This means that the local router will process a Candidate-RP Advertisement message fro… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.14 | ColumnpimNmEntBfdEntityIndex | read-create | current | Identifies a BFD stub entity to which the Neighbor Manager will join. A value of zero indicates that no BFD provider is available, or that NM should not join t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.15 | ColumnpimNmEntBfdJoinOperStatus | read-only | current | The current operational state of the BFD join. If pimNmEntBfdEntityIndex is non-zero, pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object… |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.16 | ColumnpimNmEntTenantName | read-create | current | Name of the tenant which owns this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.17 | ColumnpimNmEntTenantId | read-create | current | ID of the tenant which owns this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.18 | ColumnpimNmEntEnableAlarms | read-create | current | Enables alarms on this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.16.1.19 | ColumnpimNmEntRtmIndex | read-create | current | Identifies a rtm index used for stubs. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17 | TablepimNmEntStatsTable | not-accessible | current | This table lists the statistics for DC-PIM Neighbor Manager entities. Note that any messages filtered out by pimInterfaceNeighborFilter do not contribute to an… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1 | RowpimNmEntStatsEntry | not-accessible | current | Each entry represents the statistics for a DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.1 | ColumnpimNmEntStatsNumSentCRPAdvert | read-only | current | The number of PIM Candidate-RP-Advertisement messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.2 | ColumnpimNmEntStatsNumSentRegister | read-only | current | The number of PIM Register messages that have been sent by this DC-PIM Neighbor Manager entity. Note that this only includes PIM Register messages forwarded to… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.3 | ColumnpimNmEntStatsNumSentRegisterStop | read-only | current | The number of PIM Register-Stop messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.4 | ColumnpimNmEntStatsNumRecvCRPAdvert | read-only | current | The number of valid PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.5 | ColumnpimNmEntStatsNumRecvRegister | read-only | current | The number of valid PIM Register messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.6 | ColumnpimNmEntStatsNumRecvRegisterStop | read-only | current | The number of valid PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.7 | ColumnpimNmEntStatsNumErrCRPAdvert | read-only | current | The number of PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.8 | ColumnpimNmEntStatsNumErrRegister | read-only | current | The number of PIM Register messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.9 | ColumnpimNmEntStatsNumErrRegisterStop | read-only | current | The number of PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.10 | ColumnpimNmEntStatsNumRecvIgnoredType | read-only | current | The number of PIM messages with a known but unsupported PIM message type that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.11 | ColumnpimNmEntStatsNumRecvUnknownType | read-only | current | The number of PIM messages with an unknown PIM message type that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.12 | ColumnpimNmEntStatsNumRecvUnknownVer | read-only | current | The number of PIM messages with an unknown PIM version that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.13 | ColumnpimNmEntStatsNumRecvBadChecksum | read-only | current | The number of PIM messages with a incorrect PIM checksum that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.14 | ColumnpimNmEntStatsNumRecvBadLength | read-only | current | The number of PIM messages with a length too short to contain a common PIM header that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.15 | ColumnpimNmEntStatsNumCRPAdvfiltered | read-only | current | The number of C-RP-Advertisement messages which have been filtered out by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.17 | ColumnpimNmEntStatsNumRecvHello | read-only | current | The number of valid PIM Hello messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.18 | ColumnpimNmEntStatsNumErrHello | read-only | current | The number of PIM Hello messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.19 | ColumnpimNmEntStatsNumRecvJoinPrune | read-only | current | The number of valid PIM Join/Prune messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.20 | ColumnpimNmEntStatsNumRecvAssert | read-only | current | The number of valid PIM Assert messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.21 | ColumnpimNmEntStatsNumRecvBSM | read-only | current | The number of valid PIM Bootstrap messages that have been received by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.22 | ColumnpimNmEntStatsNumErrJoinPrune | read-only | current | The number of PIM Join/Prune messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. Note that this does not includ… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.23 | ColumnpimNmEntStatsNumErrAssert | read-only | current | The number of PIM Assert messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.24 | ColumnpimNmEntStatsNumErrBSM | read-only | current | The number of PIM Bootstrap messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.25 | ColumnpimNmEntStatsNumRecvGraft | read-only | current | The number of Graft messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, this count will be zero. An… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.26 | ColumnpimNmEntStatsNumErrGraft | read-only | current | The number of badly formatted Graft messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pimTmEntMo… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.27 | ColumnpimNmEntStatsNumRecvGraftAck | read-only | current | The number of Graft Ack messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, this count will be zero… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.28 | ColumnpimNmEntStatsNumErrGraftAck | read-only | current | The number of badly formatted Graft Ack messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pimTmE… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.29 | ColumnpimNmEntStatsNumRecvStateRefresh | read-only | current | The number of State Refresh messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, or the TM entity is… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.30 | ColumnpimNmEntStatsNumErrStateRefresh | read-only | current | The number of badly formatted State Refresh messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pi… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.31 | ColumnpimNmEntStatsNumRecvDFElection | read-only | current | The number of DF election messages which have been received by this DC-PIM Neighbor Manager entity. If 'bidir' is clear for pimTmEntMode, this count will be ze… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.32 | ColumnpimNmEntStatsNumErrDFElection | read-only | current | The number of badly formatted DF election messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'bidir' is clear for pimT… |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.33 | ColumnpimNmEntStatsNumSentHello | read-only | current | The number of valid PIM Hello messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.34 | ColumnpimNmEntStatsNumSentJoinPrune | read-only | current | The number of valid PIM Join/Prune messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.35 | ColumnpimNmEntStatsNumSentAssert | read-only | current | The number of valid PIM Assert messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.36 | ColumnpimNmEntStatsNumSentBSM | read-only | current | The number of valid PIM Bootstrap messages that have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.37 | ColumnpimNmEntStatsNumSentGraft | read-only | current | The number of Graft messages which have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.38 | ColumnpimNmEntStatsNumSentGraftAck | read-only | current | The number of Graft Ack messages which have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.39 | ColumnpimNmEntStatsNumSentStateRefresh | read-only | current | The number of State Refresh messages which have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.40 | ColumnpimNmEntStatsNumSentDFElection | read-only | current | The number of DF election messages which have been sent by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.41 | ColumnpimNmEntStatsNumRecvJoinedSrcs | read-only | current | The total number of joined sources that have been received in valid PIM Join/Prune messages by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.42 | ColumnpimNmEntStatsNumRecvPrunedSrcs | read-only | current | The total number of pruned sources that have been received in valid PIM Join/Prune messages by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.43 | ColumnpimNmEntStatsNumSentJoinedSrcs | read-only | current | The total number of joined sources that have been sent in PIM Join/Prune messages by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.17.1.44 | ColumnpimNmEntStatsNumSentPrunedSrcs | read-only | current | The total number of pruned sources that have been sent in PIM Join/Prune messages by this DC-PIM Neighbor Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18 | TablepimTmEntTable | not-accessible | current | This table is used to create and manage DC-PIM TIB Manager entities. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1 | RowpimTmEntEntry | not-accessible | current | Each entry represents an instance of the DC-PIM TIB Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.1 | ColumnpimTmEntIndex | not-accessible | current | The index of this pimTmEntEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.2 | ColumnpimTmEntRowStatus | read-create | current | Used to create and delete a DC-PIM TIB Manager Entity Table entry. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.3 | ColumnpimTmEntAdminStatus | read-create | current | The desired administrative state of the DC-PIM TIB Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.4 | ColumnpimTmEntOperStatus | read-only | current | The current operational state of the DC-PIM TIB Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.5 | ColumnpimTmEntGStateLimit | read-create | current | The maximum number of groups for which DC-PIM TIB Manager is allowed to store non-interface specific (*,G) and/or (S,G) state. A value of zero means that there… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.6 | ColumnpimTmEntGStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of groups for which it is storing non-interface specific (*,G) and/or (S,G) state exceeds this value. A valu… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.7 | ColumnpimTmEntGStateStored | read-only | current | The number of groups for which DC-PIM TIB Manager is storing non-interface specific (*,G) and/or (S,G) state. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.8 | ColumnpimTmEntSGStateLimit | read-create | current | The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store non-interface specific (S,G) state. A value of zero means that the… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.9 | ColumnpimTmEntSGStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing non-interface specific (S,G) state exceeds this value. A va… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.10 | ColumnpimTmEntSGStateStored | read-only | current | The number of {source, group} pairs for which DC-PIM TIB Manager is storing non-interface specific (S,G) state. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.11 | ColumnpimTmEntStarGIStateLimit | read-create | current | The maximum number of {group, interface} pairs for which DC-PIM TIB Manager is allowed to store (*,G,I) state. A value of zero means that there is no limit. De… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.12 | ColumnpimTmEntStarGIStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of {group, interface} pairs for which it is storing (*,G,I) state exceeds this value. A value of zero means … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.13 | ColumnpimTmEntStarGIStateStored | read-only | current | The number of {group, interface} pairs for which DC-PIM TIB Manager is storing (*,G,I) state. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.14 | ColumnpimTmEntSGIStateLimit | read-create | current | The maximum number of {source, group, interface} triplets for which DC-PIM TIB Manager is allowed to store (S,G,I) state. A value of zero means that there is n… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.15 | ColumnpimTmEntSGIStateWarnThold | read-create | current | DC-PIM TIB Manager logs an exception if the number of {source, group, interface} triplets for which it is storing (S,G,I) state exceeds this value. A value of … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.16 | ColumnpimTmEntSGIStateStored | read-only | current | The number of {source, group, interface} triplets for which DC-PIM TIB Manager is storing (S,G,I) state. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.17 | ColumnpimTmEntUseAsmGrpFilter | read-create | current | Setting this object to 'true' enables the PIM-SM ASM and BIDIR-PIM group filter specified by pimTmEntAsmGrpFilter. This field is only relevant for PIM-SM and B… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.18 | ColumnpimTmEntAsmGrpFilter | read-create | current | When PIM-SM ASM / BIDIR-PIM group filtering is enabled (that is, when pimTmEntUseAsmGrpFilter is 'true'), then for groups in the PIM-SM ASM and BIDIR-PIM space… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.19 | ColumnpimTmEntUseSsmSrcAndGrpFilter | read-create | current | Setting this object to 'true' enables the SSM source and group filter specified by pimTmEntSsmSrcAndGrpFilter. This field is only relevant for PIM-SM. This fie… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.20 | ColumnpimTmEntSsmSrcAndGrpFilter | read-create | current | When SSM source and group filtering is enabled (that is, when pimTmEntUseSsmSrcAndGrpFilter is 'true'), then for groups in the SSM space, the local router will… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.21 | ColumnpimTmEntUseRegSrcAndGrpFilter | read-create | current | Setting this object to 'true' enables the Register message filter by source and group address, specified by pimTmEntRegSrcAndGrpFilter. This field is only rele… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.22 | ColumnpimTmEntRegSrcAndGrpFilter | read-create | current | When Register message filtering by source and group address is enabled (that is, when pimTmEntUseRegSrcAndGrpFilter is 'true'), then: - for groups for which th… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.23 | ColumnpimTmEntRegSuppressionTime | read-create | current | The mean value of the randomized interval during which a DR stops Register-encapsulation after receiving a PIM Register-Stop message. This object corresponds t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.24 | ColumnpimTmEntRegProbeTime | read-create | current | The time to wait for a PIM Register-Stop message after sending a PIM Null-Register message, before resuming Register-encapsulation at a DR. This object corresp… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.25 | ColumnpimTmEntKeepalivePeriod | read-create | current | The time to keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets. This object corresponds to the 'Sou… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.26 | ColumnpimTmEntSendIfStateChangeTraps | read-create | current | Setting this object to 'true' means that DC-PIM TIB Manager will send a pimInterfaceStateChange trap when an interface's operational state changes. This field … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.27 | ColumnpimTmEntSupportedAddrType | read-create | current | This field indicates the address family type that this entity supports. On routers which support multiple address families, separate DC-PIM-TM and DC-PIM-NM en… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.28 | ColumnpimTmEntMgmdProxy | read-create | current | This field indicates whether this entity is configured to be an MGMD proxy device using a deprecated mode of integration with IGMP host support. In this mode t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.29 | ColumnpimTmEntMode | read-create | current | This field indicates the mode(s) that the PIM-TM entity is configured to operate in. - 'sparse' for PIM-SM, as defined in RFC4601. - 'dense' for PIM-DM, as def… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.30 | ColumnpimTmEntStateRefreshCapable | read-create | current | This field defines whether the local router is capable of originating and flooding PIM-DM State Refresh messages. State Refresh messages are used to ensure tha… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.31 | ColumnpimTmEntStateRefreshInterval | read-create | current | The interval between successive State Refresh(S,G) messages originated by the local router. This object corresponds to the 'RefreshInterval' timer value define… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.32 | ColumnpimTmEntSnoopBridgeDomainType | read-create | current | The type of bridge domain supported by this entity. This field is only relevant for MGMD snooping. If pimTmEntMode is not 'mgmd-snooping', this value has no ef… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.33 | ColumnpimTmEntSnoopBridgeDomainId | read-create | current | The principal ID of the bridge domain supported by this entity. This field is only valid if pimTmEntSnoopBridgeDomainType is not 'none'. The interpretation of … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.34 | ColumnpimTmEntSnoopBridgeDomainSubId | read-create | current | The secondary ID of the bridge domain supported by this entity. This field is only valid if pimTmEntSnoopBridgeDomainType is 'vpws' or 'vpls'. The interpretati… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.35 | ColumnpimTmEntMsdpFlowsRcvd | read-only | current | This field is deprecated. It returns the same value as pimTmEntStatsMsdpFlowsRcvd. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.36 | ColumnpimTmEntMsdpFlowsSent | read-only | current | This field is deprecated. It returns the same value as pimTmEntStatsMsdpFlowsSent. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.37 | ColumnpimTmEntNullRegCount | read-only | current | This field is deprecated. It returns the same value as pimTmEntStatsNullRegCount. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.38 | ColumnpimTmEntClearCounters | read-create | current | Set this object to 'true' to cause this entity to reset all its statistics counters - that is, all objects in pimTmEntStatsTable, plus the deprecated statistic… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.39 | ColumnpimTmEntNumSources | read-only | current | Number of different source addresses known by this entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.40 | ColumnpimTmEntNumRPs | read-only | current | Number of different Rendezvous Point (RP) addresses known by this entity. DC-PIM always returns zero for the value of this object in either of the following ca… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.41 | ColumnpimTmEntGRBackstopDuration | read-create | current | The length of the Graceful Restart backstop timer to run within DC-PIM, in seconds. Graceful Restart is currently only supported when running in IGMP Proxy, IG… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.42 | ColumnpimTmEntGRJoinStartupDuration | read-create | current | The length of the join startup timer to run within DC-PIM, in seconds. This timer is only used when Graceful Restart is supported. This is the case when pimTmE… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.43 | ColumnpimTmEntScheduleLimit | read-create | current | The maximum number of objects that can be processed in a single schedule. When subcomponents are scheduled by receipt of an IPS or a timer pop, that IPS can ca… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.44 | ColumnpimTmEntRtiName | read-create | current | This name of routing instance in which this PIM instance is created. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.45 | ColumnpimTmEntRtiIndex | read-create | current | The index of routing instance in which this PIM instance is created. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.46 | ColumnpimTmEntTenantName | read-write | current | Name of the tenant which owns this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.47 | ColumnpimTmEntTenantId | read-create | current | ID of the tenant which owns this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.48 | ColumnpimTmEntDynInterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on dynamic interfaces. This object corresponds to the 'Hello_Period' timer value defined in the PIM-S… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.49 | ColumnpimTmEntDynInterfaceJoinPruneInterval | read-create | current | The frequency at which this router sends PIM Join/Prune messages on dynamic interfaces. This object corresponds to the 't_periodic' timer value defined in the … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.50 | ColumnpimTmEntDynInterfaceHelloHoldtime | read-create | current | The value set in the Holdtime field of PIM Hello messages transmitted on dynamic interfaces, that is, the amount of time a receiver must consider the neighbor … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.51 | ColumnpimTmEntDynInterfaceJoinPruneHoldtime | read-create | current | The value inserted into the Holdtime field of a PIM Join/Prune message sent on dynamic interfaces, that is, the amount of time a receiver must keep the Join/Pr… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.52 | ColumnpimTmEntDynInterfacePropagationDelay | read-create | current | The value this router inserts into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages it sends on dynamic interfaces, that is,… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.53 | ColumnpimTmEntDynInterfaceOverrideInterval | read-create | current | The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on dynamic interfaces, that is,… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.54 | ColumnpimTmEntDynInterfaceAssertInterval | read-create | current | The frequency at which this router sends PIM Assert messages on dynamic interfaces when it is the assert winner. This object corresponds to the 'Assert_Time' m… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.55 | ColumnpimTmEntDynInterfaceAssertHoldtime | read-create | current | The interval before this router leaves assert loser state on dynamic interfaces, unless it receives a PIM Assert message that refreshes this state. This object… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.56 | ColumnpimTmEntSptThresholdPps | read-create | current | The threshold in packets per seconds to control transition to direct SPT. Note the value 0 for this field and pimTmEntSptThresholdKbps field indicates threshol… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.57 | ColumnpimTmEntSptThresholdKbps | read-create | current | The threshold in kilobits per seconds to control transition to direct SPT. Note the value 0 for this field and pimTmEntSptThresholdPps field indicates threshol… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.58 | ColumnpimTmEntDynInterfaceDRPriority | read-create | current | The Designated Router Priority value inserted into the DR Priority option on this interface. If all routers on the interface include the DR Priority option in … |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.59 | ColumnpimTmEntMultipathMode | read-create | current | The method of selecting a next hop when there are multiple ECMP RPF Next Hops. The following options are available. - AMB_PIM_MPATH_HIGHEST_NBR. No load splitt… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.60 | ColumnpimTmEntBidirDataMonitorEnable | read-create | current | Whether to enable monitoring of active data flows for BIDIR-PIM groups. Enabling this is a prerequisite for the following. - Static RP load-splitting for BIDIR… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.61 | ColumnpimTmEntBsrRPMultipathMode | read-create | current | The group modes for which PIM performs RP load-splitting, when needing to choose between multiple BSR-learnt RPs, each with the same PIM mode and priority valu… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.62 | ColumnpimTmEntGRStatus | read-only | current | The current status of PIM Graceful Restart. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.63 | ColumnpimTmEntGRBackstopRemaining | read-only | current | The length of time remaining on the backstop timer. Zero if the backstop timer is not running. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.64 | ColumnpimTmEntGRJoinStartupRemaining | read-only | current | The length of time remaining on the join startup timer. Zero if the timer is not running. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.65 | ColumnpimTmEntRegisterSourceIf | read-create | current | The interface index for the interface from which the source address for Register messages is chosen. This field is not used for Register messages sent to Anyca… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.66 | ColumnpimTmEntPassInterfaceInfo | read-create | current | Setting this object to 'true' means that DC-PIM TIB Manager will pass information about interfaces to the MPF stub in ATG_TIBI_ADD_UPD_MCAST_IF and ATG_TIBI_DE… |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.67 | ColumnpimTmEntBSRTimeout | read-create | current | The interval for which an elected BSR remains valid after the receipt of a BSM. |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.68 | ColumnpimTmEntEnableAlarms | read-create | current | Enables alarms on this PIM instance |
| 1.2.826.42.1.1578918.5.71.1.1.1.18.1.69 | ColumnpimTmEntRPMultipathAlgorithm | read-create | current | The algorithm for selecting an RP, when there are multiple RPs with the same information origin (static or BSR), PIM mode and priority value. To conform to RFC… |
| 1.2.826.42.1.1578918.5.71.1.1.1.19 | TablepimTmMjTable | not-accessible | current | This table is used to create and manage the master joins that DC-PIM TIB Manager forms to other entities. Each join is represented by a row in this table. The … |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1 | RowpimTmMjEntry | not-accessible | current | Represents a join for which the DC-PIM TIB Manager is master. |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.1 | ColumnpimTmMjInterfaceId | not-accessible | current | Identifies the interface required of this master join. |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.2 | ColumnpimTmMjPartnerIndex | not-accessible | current | Identifies the slave entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slav… |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.3 | ColumnpimTmMjRowStatus | read-create | current | The row status for this DC-PIM TIB Manager Master Join Table entry, used to create and destroy table entries. |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.4 | ColumnpimTmMjAdminStatus | read-create | current | The administrative status of this master join, used to start and stop the join. |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.5 | ColumnpimTmMjOperStatus | read-only | current | The current operational status of this master join. |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.6 | ColumnpimTmMjInFailureMode | read-only | current | If set to 'true', this join is in failure mode. This means that the slave indicated that it has a resource shortage, so the master is currently suppressing sig… |
| 1.2.826.42.1.1578918.5.71.1.1.1.19.1.7 | ColumnpimTmMjFailRetryTrigger | read-create | current | Set this object to 'true' to force the master to resume sending signals across this join immediately. Reading the value of this object has no meaning. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20 | TablepimTmSjTable | not-accessible | current | This table shows which entities the DC-PIM TIB Manager is joined to as slave. Each join is represented by a row in this table. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1 | RowpimTmSjEntry | not-accessible | current | Represents a join for which the DC-PIM TIB Manager is slave. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1.1 | ColumnpimTmSjInterfaceId | not-accessible | current | Identifies the interface provided on this slave join. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1.2 | ColumnpimTmSjPartnerIndex | not-accessible | current | Identifies the master entity joined to. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1.3 | ColumnpimTmSjOperStatus | read-only | current | The current operational status of this slave join. |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1.4 | ColumnpimTmSjInFailureMode | read-only | current | If set to 'true', this join is in failure mode. This means that the master indicated that it has a resource shortage, so the slave is currently suppressing sig… |
| 1.2.826.42.1.1578918.5.71.1.1.1.20.1.5 | ColumnpimTmSjFailRetryTrigger | read-write | current | Set this object to 'true' to force the slave to resume sending signals across this join immediately. Reading the value of this object has no meaning. This obje… |
| 1.2.826.42.1.1578918.5.71.1.1.1.21 | TablepimBidirDFElectionTable | not-accessible | current | The (conceptual) table listing the per-RP Designated Forwarder (DF) Election state for each interface for all the RPs in BIDIR-PIM mode. This table is empty if… |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1 | RowpimBidirDFElectionEntry | not-accessible | current | An entry (conceptual row) in the pimBidirDFElectionTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.2 | ColumnpimBidirDFElectionAddressType | not-accessible | current | The address type of this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.3 | ColumnpimBidirDFElectionRPAddress | not-accessible | current | The IP address of the RP for which the DF state is being maintained. The InetAddressType is given by the pimBidirDFElectionAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.4 | ColumnpimBidirDFElectionIfIndex | not-accessible | current | The value of ifIndex for the interface for which the DF state is being maintained. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.5 | ColumnpimBidirDFElectionWinnerAddrType | read-only | current | The address type of the winner of the DF Election process. A value of unknown(0) indicates there is currently no DF. DC-PIM returns unknown(0) or the same valu… |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.6 | ColumnpimBidirDFElectionWinnerAddress | read-only | current | The primary IP address of the winner of the DF Election process. The InetAddressType is given by the pimBidirDFElectionWinnerAddressType object. If there is cu… |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.7 | ColumnpimBidirDFElectionWinnerUpTime | read-only | current | The time since the current winner (last) became elected as the DF for this RP, or zero if there is currently no DF. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.8 | ColumnpimBidirDFElectionWinnerMtrcPrf | read-only | current | The metric preference advertised by the DF Winner, or zero if there is currently no DF. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.9 | ColumnpimBidirDFElectionWinnerMetric | read-only | current | The metric advertised by the DF Winner, or zero if there is currently no DF. |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.10 | ColumnpimBidirDFElectionState | read-only | current | The state of this interface with respect to DF-Election for this RP. The states correspond to the ones defined in the BIDIR-PIM specification (RFC5015). |
| 1.2.826.42.1.1578918.5.71.1.1.1.21.1.11 | ColumnpimBidirDFElectionStateTimer | read-only | current | This object corresponds to the remaining duration of the 'DF election-Timer (DFT)' defined by the BIDIR-PIM specification (RFC5015). Expiration of the timer ca… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22 | TablepimStaticRPMultiTable | not-accessible | current | This table performs the same role as pimStaticRPTable, but it allows multiple static RPs to be configured for the same ASM or BIDIR group range. This allows fo… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1 | RowpimStaticRPMultiEntry | not-accessible | current | An entry (conceptual row) in the pimStaticRPTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.1 | ColumnpimStaticRPMultiAddressType | not-accessible | current | The address type of this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.2 | ColumnpimStaticRPMultiRPAddress | not-accessible | current | The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPMultiAddressType object. This field mus… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.3 | ColumnpimStaticRPMultiGrpAddress | not-accessible | current | The multicast group address which, when combined with pimStaticRPMultiGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by t… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.4 | ColumnpimStaticRPMultiGrpPrefixLength | not-accessible | current | The multicast group prefix length, which, when combined with pimStaticRPMultiGrpAddress, gives the group prefix for this entry. The InetAddressType is given by… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.5 | ColumnpimStaticRPMultiPriority | read-create | current | The priority for this row. Numerically higher values for this object indicate lower priorities, with the value zero denoting the highest priority. For a group … |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.6 | ColumnpimStaticRPMultiPimMode | read-create | current | The PIM mode to be used for groups in this group prefix. This object must be set to either 'asm' or 'bidir'. To configure group ranges for other modes, use pim… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.7 | ColumnpimStaticRPMultiOverrideSubrngs | read-create | current | Whether this static RP configuration will override other RP information learned for groups in this group prefix. If this object is TRUE, then this object will … |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.8 | ColumnpimStaticRPMultiRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before a valid value has been w… |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.9 | ColumnpimStaticRPMultiAdminStatus | read-create | current | The desired administrative state of this row. |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.10 | ColumnpimStaticRPMultiOperStatus | read-only | current | The current operational state of this row. |
| 1.2.826.42.1.1578918.5.71.1.1.1.22.1.11 | ColumnpimStaticRPMultiOperFailReason | read-only | current | When pimStaticRPMultiOperStatus is operStatusFailedPerm, this object provides additional information about the cause of the failure. |
| 1.2.826.42.1.1578918.5.71.1.1.1.23 | TablepimGroupAddrMappingTable | not-accessible | current | The (conceptual) table listing the PIM mode and RP address (if any) in use for each multicast group address. See the pimGroupMappingTable for the algorithm tha… |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1 | RowpimGroupAddrMappingEntry | not-accessible | current | An entry (conceptual row) in the pimGroupAddrMappingTable. |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1.1 | ColumnpimGroupAddrMappingAddressType | not-accessible | current | The address type of the IP multicast group. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1.2 | ColumnpimGroupAddrMappingGroupAddress | not-accessible | current | The IP multicast group address. The InetAddressType is given by the pimGroupAddrMappingAddressType object. |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1.3 | ColumnpimGroupAddrMappingPimMode | read-only | current | The PIM mode to be used for this multicast group. |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1.4 | ColumnpimGroupAddrMappingRPAddress | read-only | current | The IP address of the RP to be used for this group, or zero if no RP is to be used, or if the RP address is unknown. The address type is given by the pimGroupA… |
| 1.2.826.42.1.1578918.5.71.1.1.1.23.1.5 | ColumnpimGroupAddrMappingOrigin | read-only | current | The mechanism by which this group mapping was learned. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24 | TablepimTmEntStatsTable | not-accessible | current | This table lists the statistics for DC-PIM TIB Manager entities. The statistics in this table can be cleared using the pimTmEntClearCounters field. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1 | RowpimTmEntStatsEntry | not-accessible | current | Each entry represents the statistics for a DC-PIM TIB Manager entity. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.1 | ColumnpimTmEntStatsTmEntIndex | not-accessible | current | The index of this pimTmEntEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.2 | ColumnpimTmEntStatsMsdpFlowsRcvd | read-only | current | Number of new or updated (S,G) data flows received by this entity in ATG_MSDI_REMOTE_DATA_ACT messages from Multicast Source Discovery Entities during the life… |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.3 | ColumnpimTmEntStatsMsdpFlowsSent | read-only | current | Number of new or updated (S,G) data flows advertised by this entity to Multicast Source Discovery Entities in ATG_MSDI_LOCAL_DATA_ACT messages during the lifet… |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.4 | ColumnpimTmEntStatsNullRegCount | read-only | current | Number of Null Register messages received by this entity. This counter will wrap at 2^32 messages. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.5 | ColumnpimTmEntStatsNumSptSwitchoverRq | read-only | current | Number of SPT switchover requests received by this entity. This counter will wrap at 2^32 messages. |
| 1.2.826.42.1.1578918.5.71.1.1.1.24.1.6 | ColumnpimTmEntStatsNumRegisterStateSG | read-only | current | The number of (S,G) pairs for which PIM is storing DR Register(S,G) state. In other words, the number of pimSGTable rows for which pimSGDRRegisterState is not … |
| 1.2.826.42.1.1578918.5.71.1.2 | NodepimMIBConformance | |||
| 1.2.826.42.1.1578918.5.71.1.2.1 | NodepimMIBCompliances | |||
| 1.2.826.42.1.1578918.5.71.1.2.1.1 | CompliancepimMIBCompliance | current | The compliance statement for PIM routers which implement the PIM MIB. | |
| 1.2.826.42.1.1578918.5.71.1.2.2 | NodepimMIBGroups | |||
| 1.2.826.42.1.1578918.5.71.1.2.2.1 | GrouppimNotificationGroup | current | A collection of notifications for signaling important PIM events. | |
| 1.2.826.42.1.1578918.5.71.1.2.2.2 | GrouppimObjectGroup | current | A collection of objects for managing PIM routers. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OriginatorState | INTEGER { notOriginator(0), originator(1) } | current | Originator FSM states. PIM-DM only. notOriginator(0) 'Not Originator' FSM state. The local router is not originating StateRefresh messages. originator(1) 'Originator' FSM state. The local router is originating StateRefr… |
| PimBfdSessionType | INTEGER { none(0), desired(1), strict(2) } | current | The BFD session support type for an interface. |
| PimBsrRPMultipathMode | BITS { asm(0), bidir(1) } | current | The group modes for which PIM performs RP load-splitting, when needing to choose between multiple BSR-learnt RPs for a group range, each with the same PIM mode and priority value. |
| PimDfElectionState | INTEGER { offer(1), lose(2), win(3), backoff(4), disabled(5) } | current | BIDIR-PIM DF election states. |
| PimEntMode | BITS { sparse(0), dense(1), sparsedense(2), mgmdsnooping(3), mgmdproxy(4) } | current | The PIM mode in which an entity is operating. sparse The entity is running in sparse mode, as defined in RFC4601. dense The entity is running in dense mode, as defined in RFC3973. sparsedense The entity is running in sp… |
| PimGroupMappingOriginType | INTEGER { static(1), config(2), bsr(3), embedded(4), other(5) } | current | The mechanism by which a PIM group mapping was learned. static(1) Statically created link-local or unroutable group mappings. config(2) Local configuration. bsr(3) The PIM Bootstrap Router (BSR) mechanism [I-D.ietf-pim-… |
| PimGroupMode | INTEGER { none(1), ssm(2), asm(3), bidir(4), other(5), dense(6) } | current | The PIM mode in which a group is operating. none(1) The group is not using PIM, for example because it is a link-local or unroutable group address. ssm(2) Source-Specific Multicast (SSM), with PIM Sparse Mode. asm(3) An… |
| PimGrStatus | INTEGER { disabled(1), learning(2), querying(3), programming(4), successful(5), timedOut(6), failed(7) } | current | The current status and previous result of PIM graceful restart. disabled(1) PIM graceful restart is disabled. learning(2) PIM is currently learning group membership state from PIM neighbors and the local MGMD device. qu… |
| PimGrTimerValue | Unsigned32 (0..3600) | current | Minimum, maximum and default values for the Graceful Restart backstop timer duration. In seconds. The default value is 0 seconds - i.e. Graceful Restart is disabled. This is so that existing deployment don't have Gracef… |
| PimMultipathMode | INTEGER { highestNeighbor(1), nextHopGroupHash(2), groupModulo(3), nextHopSGHash(4) } | current | The selection method when PIM needs to choose between. multiple ECMP RPF next hops provided by the MRIB. highestNeighbor(1) Use no load splitting between ECMP next hops. If multiple ECMP next hops are available, PIM sel… |
| PimNeighborOperState | INTEGER { up(1), goingDown(2), pendingBfd(3) } | current | Oper state values for a PIM Neighbor. |
| PimRPMultipathAlgorithms | INTEGER { rfc4601Hash(1), groupModulo(2) } | current | The algorithms that PIM supports for choosing between multiple RPs for a group range, with the same origin (static or BSR), PIM mode and priority value. |
| PimStaticRPMultiOpFailReason | INTEGER { none(1), configClash(2), inconsistentOverride(3) } | current | The reason that a row in pimStaticRPMultiTable has failed to activate. |
| PimStatsCounter | Unsigned32 | current | The count of the number of events of a particular type that have occurred since the last time either the NMI join was established (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager, or by recovery after… |
| PimTmIfIdMj | INTEGER { tmMjIfTib(1), tmMjIfGmi(2), tmMjIfMsdi(3) } | current | The type of interface to which a DC-PIM TIB Manager master join applies. |
| PimTmIfIdSj | INTEGER { tmSjIfGrpMgmnt(1), tmSjIfActiveRoutes(2), tmSjIfNbrMgmnt(3) } | current | The type of interface to which a DC-PIM TIB Manager slave join applies. |
| PruneState | INTEGER { forwarding(1), ackPending(2), pruned(3) } | current | Upstream Prune FSM states. PIM-DM only. forwarding(1) 'Forwarding' FSM state. The local router is forwarding data. ackPending(2) 'AckPending' FSM state. The local router is forwarding data and is awaiting a Graft Ack fr… |