DC-RSVP-MIB
164 objects
The MIB module for management of the DC-RSVP product.
Imported Objects
| DC-MASTER-TC | NumericIndexOrZero |
| IF-MIB | InterfaceIndexOrZero |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.6 | IdentitydcRsvp | The MIB module for management of the DC-RSVP product. | ||
| 1.3.6.1.4.1.629.10.6.1 | NodedcRsvpObjects | |||
| 1.3.6.1.4.1.629.10.6.1.1 | TabledcRsvpProductTable | not-accessible | current | The table of active instances of DC-RSVP. The number of fields in this table is equal to AMB_OID_RSVP_PROD_MAX. |
| 1.3.6.1.4.1.629.10.6.1.1.1 | RowdcRsvpProductEntry | not-accessible | current | Each entry represents an RSVP entity. |
| 1.3.6.1.4.1.629.10.6.1.1.1.1 | ColumndcRsvpProductIndex | not-accessible | current | The index of this dcRsvpProductEntry. This is the HAF entity index passed on the entity create parameters. |
| 1.3.6.1.4.1.629.10.6.1.1.1.2 | ColumndcRsvpProductASNumber | read-create | current | The number identifying the autonomous system (AS) to which this node belongs. |
| 1.3.6.1.4.1.629.10.6.1.1.1.3 | ColumndcRsvpProductSenderTTL | read-create | current | The TTL set on messages originating at this node. A value of 0 indicates this number is determined by other means. |
| 1.3.6.1.4.1.629.10.6.1.1.1.4 | ColumndcRsvpProductMinTimerPeriod | read-create | current | The minimum granularity to allow an internal timer to be set in the DC-RSVP product code. |
| 1.3.6.1.4.1.629.10.6.1.1.1.5 | ColumndcRsvpProductAPIIfIndex | read-create | current | Management assigned interface identifier for the (internal) LRAPI interface between RSVP and DC-TPM components. This must be unique in the interface index name… |
| 1.3.6.1.4.1.629.10.6.1.1.1.6 | ColumndcRsvpProductAPIAddress | read-create | current | Management assigned IP address used to identify the (internal) LRAPI interface between RSVP and DC-TPM components. The configured API address MUST not be a rea… |
| 1.3.6.1.4.1.629.10.6.1.1.1.7 | ColumndcRsvpProductAPIRefreshInterval | read-create | current | This field is now deprecated. |
| 1.3.6.1.4.1.629.10.6.1.1.1.8 | ColumndcRsvpProductLocalRepairDelay | read-create | current | This object is used to set the delay between detection of a path error and instigation of local repair procedures. This allows local routing updates to converg… |
| 1.3.6.1.4.1.629.10.6.1.1.1.9 | ColumndcRsvpProductRefreshInterval | read-create | current | This RSVP value, R, which is used to set the average interval between refresh path and resv messages. Note : If values for the if_refresh_interval and if_refre… |
| 1.3.6.1.4.1.629.10.6.1.1.1.10 | ColumndcRsvpProductRefreshMultiple | read-create | current | The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deem… |
| 1.3.6.1.4.1.629.10.6.1.1.1.11 | ColumndcRsvpProductRfrshSlewDenom | read-create | current | The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is i… |
| 1.3.6.1.4.1.629.10.6.1.1.1.12 | ColumndcRsvpProductRfrshSlewNumerator | read-create | current | The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is inc… |
| 1.3.6.1.4.1.629.10.6.1.1.1.13 | ColumndcRsvpProductBlockadeMultiple | read-create | current | The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. |
| 1.3.6.1.4.1.629.10.6.1.1.1.14 | ColumndcRsvpProductSocketBufPoolSize | read-create | current | The number of pre-reserved buffers available for sending sockets data. This is used to pace the sockets data flows. |
| 1.3.6.1.4.1.629.10.6.1.1.1.15 | ColumndcRsvpProductSwitchBufPoolSize | read-create | current | The number of pre-reserved buffers available for programming the switch. This is used to ensure programming operations do not fail in buffer shortage condition… |
| 1.3.6.1.4.1.629.10.6.1.1.1.16 | ColumndcRsvpProductTeMibBufPoolSize | read-create | current | The number of pre-reserved buffers available for signalling with the DC-TPM entity supporting the instance of the TE-MIB. This is used to ensure signals are no… |
| 1.3.6.1.4.1.629.10.6.1.1.1.17 | ColumndcRsvpProductRoutingBufPoolSize | read-create | current | The number of pre-reserved buffers available for route queries. This is used to ensure re-routing of many LSPs does not fail in buffer shortage conditions. |
| 1.3.6.1.4.1.629.10.6.1.1.1.18 | ColumndcRsvpProductLSPSetupPriority | read-create | current | The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be … |
| 1.3.6.1.4.1.629.10.6.1.1.1.19 | ColumndcRsvpProductLSPHoldingPriority | read-create | current | The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must b… |
| 1.3.6.1.4.1.629.10.6.1.1.1.20 | ColumndcRsvpProductAdminStatus | read-create | current | The desired administrative state of the RSVP entity. |
| 1.3.6.1.4.1.629.10.6.1.1.1.21 | ColumndcRsvpProductOperStatus | read-only | current | The current operational state of this instance of DC-RSVP. |
| 1.3.6.1.4.1.629.10.6.1.1.1.22 | ColumndcRsvpProductRowStatus | read-create | current | Used to create and delete a DC-RSVP Product Table entry. When this object is set to 'active', only the dcRsvpProductAdminStatus object in the row may be modifi… |
| 1.3.6.1.4.1.629.10.6.1.1.1.23 | ColumndcRsvpProductLsrIndex | read-create | current | The index of the DC-LMGR product instance which this DC-RSVP is to join to as its LDB interface provider. If this value is not specified, or the value of this … |
| 1.3.6.1.4.1.629.10.6.1.1.1.24 | ColumndcRsvpProductTeMibIndex | read-create | current | The index of the DC-TPM entity (which supports the TE-MIB) with which this DC-RSVP entity is to join to as its LRA interface provider. If this value is not spe… |
| 1.3.6.1.4.1.629.10.6.1.1.1.25 | ColumndcRsvpProductMultiStackSupport | read-create | current | A flag to indicate if multiple RSVP stacks are present in the same system as the current one and, if so, how they are supported. If set to PHOP, Path messages … |
| 1.3.6.1.4.1.629.10.6.1.1.1.26 | ColumndcRsvpProductUseHopByHop | read-create | current | A flag to indicate that DC-RSVP should use the hop by hop addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the … |
| 1.3.6.1.4.1.629.10.6.1.1.1.27 | ColumndcRsvpProductUseNotify | read-create | current | A flag to indicate that DC-RSVP should attempt to insert a Notify Request object in all Path requests that it sends as ingress and all Resv requests that it se… |
| 1.3.6.1.4.1.629.10.6.1.1.1.28 | ColumndcRsvpProductNotifyRRDecay | read-create | current | The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retrans… |
| 1.3.6.1.4.1.629.10.6.1.1.1.29 | ColumndcRsvpProductNotifyRRInterval | read-create | current | The interval in milliseconds before a Notify message is first resent if no acknowledgement is received. |
| 1.3.6.1.4.1.629.10.6.1.1.1.30 | ColumndcRsvpProductNotifyRRLimit | read-create | current | The maximum number of times a Notify message is resent if no acknowledgement is received. |
| 1.3.6.1.4.1.629.10.6.1.1.1.31 | ColumndcRsvpProductAllowIPEncap | read-create | current | A flag to indicate that DC-RSVP should support the use of IP encapsulation of RSVP packets, which are required for out-of-band signaling. If set, then DC-RSVP … |
| 1.3.6.1.4.1.629.10.6.1.1.1.32 | ColumndcRsvpProductProtocolExtensions | read-create | current | Specifies which extensions to the standard RSVP-TE protocol are enabled. For fully standards-compliant behavior, set this parameter to zero (no bits set). To e… |
| 1.3.6.1.4.1.629.10.6.1.1.1.33 | ColumndcRsvpProductPSRFlags | read-create | current | This field is used by DC-RSVP to determine whether it should set the Path State Removed flag on a PathErr (and therefore remove corresponding state and generat… |
| 1.3.6.1.4.1.629.10.6.1.1.1.34 | ColumndcRsvpProductInitPathRRDecay | read-create | current | The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Initial Path message. A value of 0 indicates a constant r… |
| 1.3.6.1.4.1.629.10.6.1.1.1.35 | ColumndcRsvpProductInitPathRRInterval | read-create | current | The rapid retransmission interval in milliseconds before an Initial Path message is first resent if no acknowledgement is received. A Path message is treated a… |
| 1.3.6.1.4.1.629.10.6.1.1.1.36 | ColumndcRsvpProductInitPathRRLimit | read-create | current | The maximum number of times an Initial Path message is resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path… |
| 1.3.6.1.4.1.629.10.6.1.1.1.37 | ColumndcRsvpProductEnableUni | read-create | current | A flag to indicate whether the local node supports UNI signaling messages. |
| 1.3.6.1.4.1.629.10.6.1.1.1.38 | ColumndcRsvpProductRestartCapable | read-create | current | A flag to indicate whether the local node should advertise itself as restart capable. This should be set to AMB_TRUE if fault-tolerance is enabled in DC-MPLS o… |
| 1.3.6.1.4.1.629.10.6.1.1.1.39 | ColumndcRsvpProductRestartTime | read-create | current | The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP communication. This is advertised to neighbor… |
| 1.3.6.1.4.1.629.10.6.1.1.1.40 | ColumndcRsvpProductRecoveryTime | read-create | current | The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP and MPLS forwarding information after the re-establish… |
| 1.3.6.1.4.1.629.10.6.1.1.1.41 | ColumndcRsvpProductMinPeerRestart | read-create | current | The mininum period of time in milliseconds that RSVP should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related… |
| 1.3.6.1.4.1.629.10.6.1.1.1.42 | ColumndcRsvpProductGracefulDelTimeout | read-create | current | The time in milliseconds that DC-MPLS will wait for graceful deletion to complete before the forced deletion procedure is used instead. |
| 1.3.6.1.4.1.629.10.6.1.1.1.43 | ColumndcRsvpProductEgressDelBehavior | read-create | current | Specifies the action that an egress node should take in the graceful deletion procedure on receipt of a Path message containing an Admin Status object with the… |
| 1.3.6.1.4.1.629.10.6.1.1.1.44 | ColumndcRsvpProductEnabUniConnSplicing | read-create | current | A flag to indicate whether UNI-N nodes should allow the splicing of UNI connections with proprietary ON connections. |
| 1.3.6.1.4.1.629.10.6.1.1.1.45 | ColumndcRsvpProductFastRerouteCaps | read-create | current | Specifies what fast reroute capabilities are enabled on this node. This field is only valid if the fast reroute extension is enabled in the dcRsvpProductProtoc… |
| 1.3.6.1.4.1.629.10.6.1.1.1.46 | ColumndcRsvpProductFastRroutBkpRtryInt | read-create | current | When this node is a PLR, this field specifies the period that the node should wait before retrying the setup of a backup LSP which failed last time because no … |
| 1.3.6.1.4.1.629.10.6.1.1.1.47 | ColumndcRsvpProductErrorActionFlags | read-create | current | This field is used by DC-RSVP to determine whether it should take any special action following certain types of local errors. Each bit of this flags field corr… |
| 1.3.6.1.4.1.629.10.6.1.1.1.48 | ColumndcRsvpProductEnableNni | read-create | current | A flag to indicate whether the local node supports NNI signaling messages. |
| 1.3.6.1.4.1.629.10.6.1.1.1.49 | ColumndcRsvpProductBehaviorFlags | read-create | current | Specifies some detailed aspects of the behavior of DC-RSVP. This field may be changed while _admin_status_ is AMB_ADMIN_STATUS_UP. - enableTTLMatch: Whether to… |
| 1.3.6.1.4.1.629.10.6.1.1.1.50 | ColumndcRsvpProductLabelSetStyle | read-create | current | Specifies the style of LABEL_SET object that should be used. RFCs 3741 and 3743 are unclear whether the LABEL_SET object should include LABEL headers. The corr… |
| 1.3.6.1.4.1.629.10.6.1.1.1.51 | ColumndcRsvpProductLabelSetOperStatus | read-only | current | The current operational status of Label Set style. - excludeLabelHeader: The LABEL_SET object contains concatenated LABEL values without the object headers. - … |
| 1.3.6.1.4.1.629.10.6.1.1.1.52 | ColumndcRsvpProductLabelSetTrapEnable | read-create | current | This object is used to enable traps for the Label Set style oper_status object. |
| 1.3.6.1.4.1.629.10.6.1.1.1.53 | ColumndcRsvpProductLabelSetChngAct | read-create | current | Specifies the action to take when the value of dcRsvpProductLabelSetStyle is changed. - leaveLSPs: All nodes should suppress refreshes and switch to the new fo… |
| 1.3.6.1.4.1.629.10.6.1.1.1.54 | ColumndcRsvpProductExtPrtAdminStatus | read-create | current | The desired operational state of support for the extended PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling. Support for end-to-end si… |
| 1.3.6.1.4.1.629.10.6.1.1.1.55 | ColumndcRsvpProductUniIncSonetProfile | read-create | current | This field is obsolete. The value in this field is ignored by DC-RSVP for Test and Set commands. This field is always set to 0 for Get responses. |
| 1.3.6.1.4.1.629.10.6.1.1.1.56 | ColumndcRsvpProductFrrFacAdminStatus | read-create | current | Specifies whether backup LSPs can be put in place for LSPs requesting FRR using the facility method. Setting this to UP means that LSPs that request FRR using … |
| 1.3.6.1.4.1.629.10.6.1.1.1.57 | ColumndcRsvpProductFrrFacOperStatus | read-only | current | The current operational status for FRR Facility support. When this is UP backup LSPs will be put in place, when this is down backup LSPs will not be put in pla… |
| 1.3.6.1.4.1.629.10.6.1.1.1.58 | ColumndcRsvpProductIpv6AdminStatus | read-write | current | Specifies whether the local node supports IPv6 LSPs. Setting this to UP means that this node supports IPv6 LSPs being set up to, from and through this node. Se… |
| 1.3.6.1.4.1.629.10.6.1.1.1.59 | ColumndcRsvpProductIpv6OperStatus | read-only | current | The current operational status for IPv6 support. When this is UP IPv6 LSPs can be set up to from or through this node. When this is down there will be no activ… |
| 1.3.6.1.4.1.629.10.6.1.1.1.60 | ColumndcRsvpProductAPIIpv6Address | read-create | current | Management assigned IPv6 address used to identify the (internal) LRAPI interface between RSVP and DC-TPM components. The configured API IPv6 address MUST not b… |
| 1.3.6.1.4.1.629.10.6.1.1.1.61 | ColumndcRsvpProductExtPrtOperStatus | read-only | current | The current operational state of support for the extended PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling. |
| 1.3.6.1.4.1.629.10.6.1.1.1.62 | ColumndcRsvpProductRROHopType | read-create | current | The type of Recorded Route hop that DC-RSVP will insert on any messages requesting Recorded Route information. DC-RSVP uses the same hop type on all outgoing m… |
| 1.3.6.1.4.1.629.10.6.1.1.1.63 | ColumndcRsvpProductBfdIndex | read-create | current | The index of the BFD product instance which this DC-RSVP is to join to as its BFD interface provider. If the value of this object is 0, DC-RSVP will not attemp… |
| 1.3.6.1.4.1.629.10.6.1.1.1.64 | ColumndcRsvpProductBfdBufPoolSize | read-create | current | The number of pre-reserved buffers available for BFD interface messages. This is used to ensure that the establishment of many BFD sessions does not fail in bu… |
| 1.3.6.1.4.1.629.10.6.1.1.1.65 | ColumndcRsvpProductLspAttrAdminStatus | read-create | current | Specifies whether the local node supports the LSP_ATTRIBUTES object. Setting this to UP means that this node supports LSPs with the LSP_ATTRIBUTES object being… |
| 1.3.6.1.4.1.629.10.6.1.1.1.66 | ColumndcRsvpProductLspAttrOperStatus | read-only | current | The current operational state of support for the LSP_ATTRIBUTES object. |
| 1.3.6.1.4.1.629.10.6.1.1.1.67 | ColumndcRsvpProductI3Index | read-create | current | The index of the I3 entity with which this DC-RSVP entity is to join to as its I3 interface provider. If this value is not specified, DC-RSVP will use the dcRs… |
| 1.3.6.1.4.1.629.10.6.1.1.1.68 | ColumndcRsvpProductSckIndex | read-create | current | The index of the SCK entity with which this DC-RSVP entity is to join to as its SCK interface provider. If this value is not specified, DC-RSVP will use the dc… |
| 1.3.6.1.4.1.629.10.6.1.1.1.69 | ColumndcRsvpProductNhrIndex | read-create | current | The index of the NHR entity with which this DC-RSVP entity is to join to as its NHR interface provider. If this value is not specified, DC-RSVP will use the dc… |
| 1.3.6.1.4.1.629.10.6.1.1.1.70 | ColumndcRsvpProductWaitForHellos | read-create | current | Specifies whether DC-RSVP should suppress sending of Path messages if gracefully restarting and there is no Hello session up to the next hop. If a Path message… |
| 1.3.6.1.4.1.629.10.6.1.1.1.71 | ColumndcRsvpProductForcePEOnEgrDel | read-create | current | Forces DC-RSVP to send a PathErr message upstream when carrying out forced deletion of an LSP at the egress node. If this field is AMB_TRUE then DC-RSVP will a… |
| 1.3.6.1.4.1.629.10.6.1.1.1.72 | ColumndcRsvpProductFastRrtBkpSetupInt | read-create | current | When this node is a PLR, this field specifies the maximum period that the node should wait on initiating the setup of a backup LSP before sending a Resv messag… |
| 1.3.6.1.4.1.629.10.6.1.2 | TabledcRsvpDiagnosticTable | not-accessible | current | The table of sessions that are being diagnosed. |
| 1.3.6.1.4.1.629.10.6.1.2.1 | RowdcRsvpDiagnosticEntry | not-accessible | current | Each entry represents a session that is being diagnosed. |
| 1.3.6.1.4.1.629.10.6.1.2.1.1 | ColumndcRsvpDiagProductIndex | not-accessible | current | The index of the DC-RSVP product that is handling this query. |
| 1.3.6.1.4.1.629.10.6.1.2.1.2 | ColumndcRsvpDiagRequestIndex | not-accessible | current | The index of this dcRsvpDiagnosticEntry. This corresponds to a particular session being diagnosed and is an arbitrary value, defined on row creation. |
| 1.3.6.1.4.1.629.10.6.1.2.1.3 | ColumndcRsvpDiagReqsInProgress | read-only | current | The number of outstanding diagnostic requests relating to this session. |
| 1.3.6.1.4.1.629.10.6.1.2.1.4 | ColumndcRsvpDiagSessionEndPoint | read-only | current | The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4 session object. |
| 1.3.6.1.4.1.629.10.6.1.2.1.5 | ColumndcRsvpDiagSessionTunnelId | read-only | current | The tunnel ID, from the LSP_TUNNEL_IPv4 session object. |
| 1.3.6.1.4.1.629.10.6.1.2.1.6 | ColumndcRsvpDiagSessionExtTunnelId | read-only | current | The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object. |
| 1.3.6.1.4.1.629.10.6.1.2.1.7 | ColumndcRsvpDiagLastHop | read-only | current | The IP address of the last hop to be queried. This is the address to which the DREQ message is first sent. |
| 1.3.6.1.4.1.629.10.6.1.2.1.8 | ColumndcRsvpDiagSender | read-only | current | The IP address of the sender for the specified session. |
| 1.3.6.1.4.1.629.10.6.1.2.1.9 | ColumndcRsvpDiagMaxHops | read-only | current | The maximum number of hops to diagnose. |
| 1.3.6.1.4.1.629.10.6.1.2.1.10 | ColumndcRsvpDiagHopByHopReply | read-only | current | A flag to indicate that DREPs should be returned hop-by- hop using the reverse of the path taken by the DREQ. |
| 1.3.6.1.4.1.629.10.6.1.2.1.11 | ColumndcRsvpDiagRowStatus | read-only | current | Used to create or delete a DC-RSVP Diagnostic Table entry. |
| 1.3.6.1.4.1.629.10.6.1.3 | TabledcRsvpDiagNodeTable | not-accessible | current | The table of nodes within a session that is being diagnosed. External management can extract information from this table, but cannot modify information in it. |
| 1.3.6.1.4.1.629.10.6.1.3.1 | RowdcRsvpDiagNodeEntry | not-accessible | current | Each entry represents a node within a session that is being diagnosed. |
| 1.3.6.1.4.1.629.10.6.1.3.1.1 | ColumndcRsvpDiagNodeProductIndex | not-accessible | current | The index of the DC-RSVP product that is handling this query. |
| 1.3.6.1.4.1.629.10.6.1.3.1.2 | ColumndcRsvpDiagNodeRequestIndex | not-accessible | current | The index of the corresponding request in dcRsvpDiagnosticTable. |
| 1.3.6.1.4.1.629.10.6.1.3.1.3 | ColumndcRsvpDiagNodeIndex | not-accessible | current | The index of this dcRsvpDiagNodeEntry. This is equivalent to the hop number, with 1 being the ingress. |
| 1.3.6.1.4.1.629.10.6.1.3.1.4 | ColumndcRsvpDiagNodeType | read-only | current | The type of the node: ingress, transit, egress or missing. Missing indicates that no diagnostic response has been received for this node, and this entry may in… |
| 1.3.6.1.4.1.629.10.6.1.3.1.5 | ColumndcRsvpDiagNodeDreqArrivalTime | read-only | current | The arrival time of the DREQ at the node, specified as a 32-bit NTP timestamp. |
| 1.3.6.1.4.1.629.10.6.1.3.1.6 | ColumndcRsvpDiagNodeIncomingIfAddr | read-only | current | The IP address of the interface on which message from the sender are expected to arrive at this node, or 0 if unknown. |
| 1.3.6.1.4.1.629.10.6.1.3.1.7 | ColumndcRsvpDiagNodeOutgoingIfAddr | read-only | current | The IP address of the interface through which the DREQ arrived and to which messages flow from the given sender for the specified session address, or 0 if unkn… |
| 1.3.6.1.4.1.629.10.6.1.3.1.8 | ColumndcRsvpDiagNodePrevHopAddr | read-only | current | The IP address from which this node receives RSVP PATH messages for this source, or 0 if unknown. This is also the address to which the DREQ was forwarded. |
| 1.3.6.1.4.1.629.10.6.1.3.1.9 | ColumndcRsvpDiagNodeDTTL | read-only | current | The number of IP hops traversed by the DREQ between the downstream RSVP node and this node. |
| 1.3.6.1.4.1.629.10.6.1.3.1.10 | ColumndcRsvpDiagNodeMFlag | read-only | current | A flag that indicates whether the reservation described by the response objects is merged with reservations from other downstream interfaces before being forwa… |
| 1.3.6.1.4.1.629.10.6.1.3.1.11 | ColumndcRsvpDiagNodeRErr | read-only | current | The error conditions at this node. Bit 3 indicates ROUTE object too big; Bit 2 indicates packet too big; Bit 1 indicates no PATH state. Bit 1 is the least sign… |
| 1.3.6.1.4.1.629.10.6.1.3.1.12 | ColumndcRsvpDiagNodeKValue | read-only | current | The refresh timer multiple. |
| 1.3.6.1.4.1.629.10.6.1.3.1.13 | ColumndcRsvpDiagNodeTimerValue | read-only | current | The local refresh timer value in seconds. |
| 1.3.6.1.4.1.629.10.6.1.3.1.14 | ColumndcRsvpDiagRsvpHopAddr | read-only | current | The hop address from the session's RSVP_HOP object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.15 | ColumndcRsvpDiagRsvpHopLIH | read-only | current | The LIH from the session's RSVP_HOP object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.16 | ColumndcRsvpDiagSenderTpltAddress | read-only | current | The address from the session's SENDER_TEMPLATE object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.17 | ColumndcRsvpDiagSenderTpltLSPId | read-only | current | The LSP ID from the session's SENDER_TEMPLATE object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.18 | ColumndcRsvpDiagFlowSpecCLBktRate | read-only | current | Int-serv controlled load token bucket rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.19 | ColumndcRsvpDiagFlowSpecCLBktDep | read-only | current | Int-serv controlled load token bucket depth in bytes, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.20 | ColumndcRsvpDiagFlowSpecCLPkDataRate | read-only | current | Int-serv controlled load peak data rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.21 | ColumndcRsvpDiagFlowSpecCLMinPolUnit | read-only | current | Int-serv controlled load minimum policed unit from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.22 | ColumndcRsvpDiagFlowSpecCLMaxPktSize | read-only | current | Int-serv controlled load maximum packet size from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.23 | ColumndcRsvpDiagFlowSpecGQBktRate | read-only | current | Int-serv guaranteed QoS token bucket rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.24 | ColumndcRsvpDiagFlowSpecGQBktDep | read-only | current | Int-serv guaranteed QoS token bucket depth in bytes, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.25 | ColumndcRsvpDiagFlowSpecGQPkDataRate | read-only | current | Int-serv guaranteed QoS peak data rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.26 | ColumndcRsvpDiagFlowSpecGQMinPolUnit | read-only | current | Int-serv guaranteed QoS minimum policed unit from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.27 | ColumndcRsvpDiagFlowSpecGQMaxPktSize | read-only | current | Int-serv guaranteed QoS maximum packet size from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.28 | ColumndcRsvpDiagFlowSpecGQRate | read-only | current | Int-serv guaranteed QoS rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
| 1.3.6.1.4.1.629.10.6.1.3.1.29 | ColumndcRsvpDiagFlowSpecGQSlack | read-only | current | Int-serv guaranteed QoS slack in microseconds, from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.30 | ColumndcRsvpDiagFlowSpecCoSCoS | read-only | current | CoS class of service from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.31 | ColumndcRsvpDiagFlowSpecCoSMTU | read-only | current | CoS maximum packet size from the session's RRI_FLOWSPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.32 | ColumndcRsvpDiagFilterSpecAddress | read-only | current | The address from the session's FILTER_SPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.33 | ColumndcRsvpDiagFilterSpecLSPId | read-only | current | The LSP ID from the session's FILTER_SPEC object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.34 | ColumndcRsvpDiagConfirmRcvAddr | read-only | current | The address from the session's CONFIRM object. |
| 1.3.6.1.4.1.629.10.6.1.3.1.35 | ColumndcRsvpDiagStyle | read-only | current | The style word from the session's STYLE object. |
| 1.3.6.1.4.1.629.10.6.1.4 | TabledcRsvpIfTable | not-accessible | current | Each entry in this table represents a RSVP-TE interface parameters entity. |
| 1.3.6.1.4.1.629.10.6.1.4.1 | RowdcRsvpIfEntry | not-accessible | current | Each entry represents a RSVP-TE interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.1 | ColumndcRsvpIfProductIndex | not-accessible | current | Index for the RSVP-TE instance. |
| 1.3.6.1.4.1.629.10.6.1.4.1.2 | ColumndcRsvpIfIndex | not-accessible | current | Network interface index in the IF-MIB (RFC 2233) of the RSVP-TE interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.3 | ColumndcRsvpIfName | read-only | current | The textual name of the interface. The value of this object is the name of the interface as assigned by the local device and is suitable for use in commands en… |
| 1.3.6.1.4.1.629.10.6.1.4.1.4 | ColumndcRsvpIfRowStatus | read-create | current | The row status for this RSVP-TE interface table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.6.1.4.1.5 | ColumndcRsvpIfAdminStatus | read-create | current | Administrative status for this interface. When dcRsvpIfRowStatus is set to 'active' and dcRsvpIfAdminStatus is 'up' this interface is advertised into DC-MPLS. |
| 1.3.6.1.4.1.629.10.6.1.4.1.6 | ColumndcRsvpIfOperStatus | read-only | current | Current operational status of the RSVP-TE interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.7 | ColumndcRsvpIfUseRefrMsgs | read-create | current | Indicates the level of refresh reduction support to be configured on this interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.8 | ColumndcRsvpIfUseMessageIDs | read-create | current | Indicates whether Message ID support should be configured on this interface. Note that Refresh Reduction measures cannot be used if Message ID support is not e… |
| 1.3.6.1.4.1.629.10.6.1.4.1.9 | ColumndcRsvpIfRefreshInterval | read-create | current | The average interval, in milliseconds, between Path and Resv refresh messages for LSPs which use this interface for RSVP-signalled data. A value of 0 indicates… |
| 1.3.6.1.4.1.629.10.6.1.4.1.10 | ColumndcRsvpIfHelloPeriod | read-create | current | Default period in milliseconds between sending Hello messages to all neighbors on this interface. If this is set to 0, no Hello messages are sent by this inter… |
| 1.3.6.1.4.1.629.10.6.1.4.1.11 | ColumndcRsvpIfHelloTolerance | read-create | current | Number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out. |
| 1.3.6.1.4.1.629.10.6.1.4.1.12 | ColumndcRsvpIfBfdEnabled | read-create | current | Indicates whether Bidirectional Forwarding Detection (BFD) is enabled on this interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.13 | ColumndcRsvpIfPhpEnabled | read-create | current | Indicates whether Penultimate Hop Popping (PHP) is enabled on this interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.14 | ColumndcRsvpIfExplNullEnabled | read-create | current | Indicates whether Explicit NULL is enabled on this interface. |
| 1.3.6.1.4.1.629.10.6.1.4.1.15 | ColumndcRsvpIfAdminGroup | read-create | current | RSVP-TE interface administrative group for this interface. |
| 1.3.6.1.4.1.629.10.6.2 | NodedcRsvpNotifications | |||
| 1.3.6.1.4.1.629.10.6.2.0 | NodedcRsvpNotifyPrefix | |||
| 1.3.6.1.4.1.629.10.6.2.0.1 | NotificationrsvpLabelSetTrap | current | The rsvpLabelSetTrap structure is used when sending MIB TRAPs from RSVP that are associated with the dcRsvpProductLabelSetOperStatus. The values are taken from… | |
| 1.3.6.1.4.1.629.10.6.3 | NodedcRsvpConformance | |||
| 1.3.6.1.4.1.629.10.6.3.1 | NodedcRsvpCompliances | |||
| 1.3.6.1.4.1.629.10.6.3.1.1 | CompliancedcRsvpCompliance | current | The compliance statement for the DC-RSVP product MIB. | |
| 1.3.6.1.4.1.629.10.6.3.2 | NodedcRsvpGroups | |||
| 1.3.6.1.4.1.629.10.6.3.2.2 | GroupdcRsvpProductGroup | current | Product Table Objects. | |
| 1.3.6.1.4.1.629.10.6.3.2.3 | GroupdcRsvpDiagGroup | current | Diagnostic Table Objects. | |
| 1.3.6.1.4.1.629.10.6.3.2.4 | GroupdcRsvpDiagNodeGroup | current | Diag Node Table Objects. | |
| 1.3.6.1.4.1.629.10.6.3.2.5 | GroupdcRsvpNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.4.1.629.10.6.3.2.6 | GroupdcRsvpIfEntryGroup | current | RSVP-TE interface Table Objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcRsvpAdminStatus | INTEGER { adminStatusUp(1), adminStatusDown(2) } | current | The desired administrative state of an RSVP entity. |
| DcRsvpDiagNodeIndexType | Unsigned32 | current | The index value identifying a node within an RSVP session that is being diagnosed. |
| DcRsvpDiagNodeTypeVal | INTEGER { missing(1), ingress(2), transit(3), egress(4) } | current | The type of a node in a session that is being diagnosed. |
| DcRsvpDiagReqIndex | Unsigned32 | current | The index value identifying an RSVP session that is being diagnosed. |
| DcRsvpIfRefreshOption | Unsigned32 { no(0), srefreshMsgs(1), bundleSendMsgs(2), noReqAck(4) } | current | The level of refresh reduction support to be configured on this interface. |
| DcRsvpIndex | Unsigned32 | current | The index value identifying an RSVP entity. |
| DcRsvpOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of an RSVP entity. |