DC-VPLS-MIB
90 objects
VPLS MIB.
Imported Objects
| DC-L2VPN-MIB | BgpExtendedCommunity BgpRouteDistinguisher l2vmEntityIndex L2vpnADType L2vpnPwBindType L2vpnSigType L2vpnVeIdOrZero |
| DC-MASTER-TC | -- RFC5601 AdminStatus NpgOperStatus NumericIndex NumericIndexOrZero |
| IANA-PWE3-MIB | IANAPwTypeTC |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.18 | IdentityvplsMib | VPLS MIB. | ||
| 1.3.6.1.4.1.629.10.18.0 | NodevplsNotifications | |||
| 1.3.6.1.4.1.629.10.18.0.1 | NotificationvplsStatusChanged | current | The vplsStatusChanged notification is generated when vplsStatusOperStatus changes to operStatusUp or operStatusFailedPerm. The object instances included in the… | |
| 1.3.6.1.4.1.629.10.18.1 | NodevplsObjects | |||
| 1.3.6.1.4.1.629.10.18.1.1 | TablevplsConfigTable | not-accessible | current | VPLS Configuration Table. This table specifies information for configuring and monitoring Virtual Private LAN Services (VPLS). It corresponds to vplsConfigTabl… |
| 1.3.6.1.4.1.629.10.18.1.1.1 | RowvplsConfigEntry | not-accessible | current | Represents a configured VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.2 | ColumnvplsIndex | not-accessible | current | Index identifying the VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.1.1.3 | ColumnvplsConfigRowStatus | read-create | current | The row status of this VPLS Configuration Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.18.1.1.1.4 | ColumnvplsConfigAdminStatus | read-create | current | The administrative status of this VPLS instance, used to activate and deactivate the VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.1.1.5 | ColumnvplsConfigOperStatus | read-only | current | The current operational state of this VPLS instance. If the operational status is 'up' then the VPLS is programmed in the data plane. |
| 1.3.6.1.4.1.629.10.18.1.1.1.6 | ColumnvplsConfigName | read-create | current | A textual name of the VPLS instance. If there is no local name, or this object is otherwise not applicable, then this field MUST contain a zero-length octet st… |
| 1.3.6.1.4.1.629.10.18.1.1.1.7 | ColumnvplsConfigDescr | read-create | current | A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this field MUST contain a zero-length oc… |
| 1.3.6.1.4.1.629.10.18.1.1.1.8 | ColumnvplsConfigADType | read-create | current | The auto-discovery protocol used by this VPLS. Changing this value will cause an interruption to data flow for this VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.9 | ColumnvplsConfigSigType | read-create | current | The pseudowire signaling protocol used for auto-created PWs on this VPLS. If vplsConfigADType is set to 'none' this field is ignored. If vplsConfigADType is se… |
| 1.3.6.1.4.1.629.10.18.1.1.1.10 | ColumnvplsConfigPwEncapType | read-create | current | The MPLS PW encapsulation type used by this VPLS. Changing this value will cause an interruption to data flow for this VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.11 | ColumnvplsConfigMacLearning | read-create | current | This field specifies if MAC Learning is enabled for this VPLS. If this field is true then MAC Learning is enabled. If false, then MAC Learning is disabled. |
| 1.3.6.1.4.1.629.10.18.1.1.1.12 | ColumnvplsConfigDiscardUnknownDest | read-create | current | If the value of this field is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are process… |
| 1.3.6.1.4.1.629.10.18.1.1.1.13 | ColumnvplsConfigMacAge | read-create | current | The aging time for entries in the VPLS Forwarder's FDB. Set to zero to disable MAC aging. |
| 1.3.6.1.4.1.629.10.18.1.1.1.14 | ColumnvplsConfigMtu | read-create | current | The layer 2 MTU of this VPLS. When using auto-discovery and signaling, this specifies the signaled layer 2 MTU. This can be used to limit the MTU to a value lo… |
| 1.3.6.1.4.1.629.10.18.1.1.1.15 | ColumnvplsConfigMacSize | read-create | current | The maximum number of learned and static entries allowed in the VPLS Forwarder's FDB. A value of zero means no maximum. |
| 1.3.6.1.4.1.629.10.18.1.1.1.16 | ColumnvplsConfigPwMacAddressLimit | read-create | current | The maximum number of learned and static entries allowed in the FDB for each PW binding. A value of zero means no maximum. |
| 1.3.6.1.4.1.629.10.18.1.1.1.17 | ColumnvplsConfigControlWord | read-create | current | Whether or not the pseudowires use a PW control word. Changing this value will cause an interruption to data flow for this VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.18 | ColumnvplsConfigSeqDelivery | read-create | current | Whether or not the pseudowires must provide sequenced delivery of traffic. Changing this value will cause an interruption to data flow for this VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.19 | ColumnvplsConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. This is only used if BGP auto-discovery is enabled (vp… |
| 1.3.6.1.4.1.629.10.18.1.1.1.20 | ColumnvplsConfigVpnId | read-create | current | The VPN ID to advertise as a BGP extended community, or zero if none. If the VPLS uses BGP auto-discovery and LDP signaling (vplsConfigADType = bgp and vplsCon… |
| 1.3.6.1.4.1.629.10.18.1.1.1.21 | ColumnvplsConfigLocalVeID | read-create | current | The local VPLS VE ID, or zero if not specified. This is only used if BGP auto-discovery is enabled (vplsConfigADType = bgp). It can be used with BGP or LDP sig… |
| 1.3.6.1.4.1.629.10.18.1.1.1.22 | ColumnvplsConfigLocalPreference | read-create | current | The preference that the local PE router is the designated forwarder for this VPLS. High values are preferred to low values. This is only used if BGP auto-disco… |
| 1.3.6.1.4.1.629.10.18.1.1.1.23 | ColumnvplsConfigLabelBlockSize | read-create | current | The size of the label blocks for this VPLS. This is only used when using BGP auto-discovery with BGP signaling (vplsConfigADType = bgp and vplsConfigSigType = … |
| 1.3.6.1.4.1.629.10.18.1.1.1.24 | ColumnvplsConfigADPwMacLearning | read-create | current | This field specifies if MAC Learning is enabled for BGP auto-discovered PW bindings in this VPLS. If this field and vplsConfigMacLearning are both true then MA… |
| 1.3.6.1.4.1.629.10.18.1.1.1.25 | ColumnvplsConfigMultiCastFloodMode | read-create | current | This field specifies which (if any) multicast frames are flooded in this VPLS. |
| 1.3.6.1.4.1.629.10.18.1.1.1.26 | ColumnvplsConfigIgnoreMtuMismatch | read-create | current | This field specifies whether mismatches of MTU size with remote PE routers should be ignored for this VPLS. If this field is false, PWs will not be established… |
| 1.3.6.1.4.1.629.10.18.1.1.1.27 | ColumnvplsConfigIgnoreEncapsMismatch | read-create | current | This field specifies whether mismatches of encapsulation type with remote PE routers should be ignored for this VPLS. If this field is false, PWs will not be e… |
| 1.3.6.1.4.1.629.10.18.1.2 | TablevplsStatusTable | not-accessible | current | This read-only table provides information for monitoring Virtual Private LAN Services (VPLS). It corresponds to vplsStatusTable in draft-ietf-l2vpn-vpls-mib-12. |
| 1.3.6.1.4.1.629.10.18.1.2.1 | RowvplsStatusEntry | not-accessible | current | A row in this table represents a Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single V… |
| 1.3.6.1.4.1.629.10.18.1.2.1.3 | ColumnvplsStatusOperStatus | read-only | current | The current operational state of this VPLS instance. If the operational status is 'up' then the VPLS is programmed in the data plane. |
| 1.3.6.1.4.1.629.10.18.1.2.1.4 | ColumnvplsStatusPwSetDownGauge | read-only | current | This field specifies the total number of operationally 'down' PW Sets currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.5 | ColumnvplsStatusPwSetGoingUpGauge | read-only | current | This field specifies the total number of operationally 'going-up' PW Sets currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.6 | ColumnvplsStatusPwSetUpGauge | read-only | current | This field specifies the total number of operationally 'up' PW Sets currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.7 | ColumnvplsStatusPwSetFailGauge | read-only | current | This field specifies the number of operationally 'failed' PW Sets currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.8 | ColumnvplsStatusPwSetFailPermGauge | read-only | current | This field specifies the number of operationally 'failed-perm' PW Sets currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.9 | ColumnvplsStatusAcDownGauge | read-only | current | This field specifies the total number of operationally 'down' attachment circuits currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.10 | ColumnvplsStatusAcGoingUpGauge | read-only | current | This field specifies the total number of operationally 'going-up' attachment circuits currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.11 | ColumnvplsStatusAcUpGauge | read-only | current | This field specifies the total number of operationally 'up' attachment circuits currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.12 | ColumnvplsStatusAcFailGauge | read-only | current | This field specifies the total number of operationally 'failed' attachment circuits currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.13 | ColumnvplsStatusAcFailPermGauge | read-only | current | This field specifies the total number of operationally 'failed-perm' attachment circuits currently present in this VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.2.1.14 | ColumnvplsStatusDesignatedForwarder | read-only | current | Whether or not the PE router is currently the elected Designated Forwarder for this VPLS instance. This field is only used if BGP auto-discovery is enabled (vp… |
| 1.3.6.1.4.1.629.10.18.1.3 | TablevplsAcBindCfgTable | not-accessible | current | This table provides an association between an Interface (as an attachment circuit) and a VPLS service. Multiple ACs can be associated to a single VPLS service.… |
| 1.3.6.1.4.1.629.10.18.1.3.1 | RowvplsAcBindCfgEntry | not-accessible | current | Each row represents an association between an attachment circuit (AC) and a VPLS instance. ACs are identified by their Interface index as defined in the ifTabl… |
| 1.3.6.1.4.1.629.10.18.1.3.1.3 | ColumnvplsAcBindCfgRowStatus | read-create | current | The row status for this VPLS AC Binding Configuration Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.18.1.3.1.4 | ColumnvplsAcBindCfgAdminStatus | read-create | current | The administrative status of this VPLS AC Binding, used to activating and deactivate the VPLS AC Binding. |
| 1.3.6.1.4.1.629.10.18.1.3.1.5 | ColumnvplsAcBindCfgOperStatus | read-only | current | The curent operational status of the binding. If the operational status is 'up' then the AC is programmed in the data plane and bound to the VPLS. |
| 1.3.6.1.4.1.629.10.18.1.3.1.6 | ColumnvplsAcBindCfgVplsIndex | read-create | current | Index identifying the VPLS instance. This field must be set to a non-zero value for which there is a matching operationally 'up' VPLS before the VPLS AC Bindin… |
| 1.3.6.1.4.1.629.10.18.1.3.1.7 | ColumnvplsAcBindCfgMacAddrLimit | read-create | current | The maximum number of learned and static entries allowed in the FDB for this AC binding. A value of zero means no maximum. |
| 1.3.6.1.4.1.629.10.18.1.3.1.8 | ColumnvplsAcBindCfgMacLearning | read-create | current | This field specifies if MAC Learning is enabled for this AC binding. If this field and vplsConfigMacLearning are both true then MAC Learning is enabled for the… |
| 1.3.6.1.4.1.629.10.18.1.4 | TablevplsPwSetBindCfgTable | not-accessible | current | This table allows an operator to manually configure an association between a PW Set and a VPLS. A PW Set is a redundant group of PWs that contains at most one … |
| 1.3.6.1.4.1.629.10.18.1.4.1 | RowvplsPwSetBindCfgEntry | not-accessible | current | Each row represents a manual association between a PW Set and a VPLS instance. |
| 1.3.6.1.4.1.629.10.18.1.4.1.2 | ColumnvplsPwSetBindCfgIndex | not-accessible | current | The index of the PW Set that is being bound to a VPLS. |
| 1.3.6.1.4.1.629.10.18.1.4.1.3 | ColumnvplsPwSetBindCfgRowStatus | read-create | current | The row status for this VPLS PW Set Binding Configuration Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.18.1.4.1.4 | ColumnvplsPwSetBindCfgAdminStatus | read-create | current | The administrative status of this VPLS PW Set Binding, used to activate and deactivate the binding. |
| 1.3.6.1.4.1.629.10.18.1.4.1.5 | ColumnvplsPwSetBindCfgOperStatus | read-only | current | The curent operational status of the binding. If the operational status is 'up' then a PW is programmed in the data plane and bound to the VPLS Forwarder. |
| 1.3.6.1.4.1.629.10.18.1.4.1.6 | ColumnvplsPwSetBindCfgVplsIndex | read-create | current | Index identifying the VPLS instance. This field must be set to a non-zero value before the VPLS PW Set Binding can go into operation status 'up'. Changing this… |
| 1.3.6.1.4.1.629.10.18.1.4.1.7 | ColumnvplsPwSetBindCfgSpltHznGrp | read-create | current | The split horizon group ID that all the PWs in this PW Set belong to. A value of zero indicates that the PWs in this PW Set do not belong to any split horizon … |
| 1.3.6.1.4.1.629.10.18.1.4.1.8 | ColumnvplsPwSetBindCfgMacLearning | read-create | current | This field specifies if MAC Learning is enabled for this PW Set binding. If this field and vplsConfigMacLearning are both true then MAC Learning is enabled for… |
| 1.3.6.1.4.1.629.10.18.1.5 | TablevplsAcBindTable | not-accessible | current | This table displays the association between a VPLS service and the corresponding attachment circuits (ACs). A service can have more than one AC association. |
| 1.3.6.1.4.1.629.10.18.1.5.1 | RowvplsAcBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more attachment circuits (ACs). ACs are identified by their interface index as defined in… |
| 1.3.6.1.4.1.629.10.18.1.5.1.4 | ColumnvplsAcBindOperStatus | read-only | current | The curent operational status of the binding. If the operational status is 'up' then the AC is programmed in the data plane and bound to the VPLS. |
| 1.3.6.1.4.1.629.10.18.1.5.1.5 | ColumnvplsAcBindAcStatus | read-only | current | The current status of the AC. |
| 1.3.6.1.4.1.629.10.18.1.6 | TablevplsPwSetBindTable | not-accessible | current | This table displays the association between a VPLS, an individual VPLS Forwarder and the PW Sets that are bound to the VPLS. This table is read-only. |
| 1.3.6.1.4.1.629.10.18.1.6.1 | RowvplsPwSetBindEntry | not-accessible | current | Each row represents an association between a VPLS Forwarder and a PW Set. |
| 1.3.6.1.4.1.629.10.18.1.6.1.3 | ColumnvplsPwSetBindIndex | not-accessible | current | The index of the PW Set that is bound to this VPLS. If vplsPwSetBindConfigType is 'manual' then this field corresponds to vplsPwSetBindCfgIndex. If vplsPwSetBi… |
| 1.3.6.1.4.1.629.10.18.1.6.1.4 | ColumnvplsPwSetBindOperStatus | read-only | current | The curent operational status of the binding. If the operational status is 'up' then the PW Set is programmed in the data plane and bound to the VPLS Forwarder. |
| 1.3.6.1.4.1.629.10.18.1.6.1.5 | ColumnvplsPwSetBindConfigType | read-only | current | If the PW Set was bound to the VPLS manually via a row in vplsPwSetBindCfgTable then this field is set to pwMibIndex. If the PW Set contains a PW that was crea… |
| 1.3.6.1.4.1.629.10.18.1.6.1.6 | ColumnvplsPwSetBindIfIndex | read-only | current | The interface index that has been assigned for this PW Set if known, or zero otherwise. |
| 1.3.6.1.4.1.629.10.18.1.6.1.7 | ColumnvplsPwSetBindRemoteRD | read-only | current | The remote route distinguisher, or null if not known. This is the route distinguisher of the best BGP route advertising the remote VPLS VE. This is only releva… |
| 1.3.6.1.4.1.629.10.18.1.6.1.8 | ColumnvplsPwSetBindRemoteAddrType | read-only | current | The address family of the remote address. This is only relevant if vplsPwSetBindConfigType = lclRmtVeId. |
| 1.3.6.1.4.1.629.10.18.1.6.1.9 | ColumnvplsPwSetBindRemoteAddr | read-only | current | The remote address, or null if not known. This is the address of the router advertising the best BGP route to the remote VPLS VE. This is only relevant if vpls… |
| 1.3.6.1.4.1.629.10.18.2 | NodevplsConformance | |||
| 1.3.6.1.4.1.629.10.18.2.1 | NodevplsCompliances | |||
| 1.3.6.1.4.1.629.10.18.2.1.1 | CompliancevplsFullCompliance | current | The module is implemented with support for manual PW bindings and auto-created PW bindings using BGP auto-discovery. | |
| 1.3.6.1.4.1.629.10.18.2.1.2 | CompliancevplsManualPwCompliance | current | The module is implemented with support for manual PW bindings. | |
| 1.3.6.1.4.1.629.10.18.2.1.3 | CompliancevplsAutoPwCompliance | current | The module is implemented with support for auto-created PW bindings using BGP auto-discovery. | |
| 1.3.6.1.4.1.629.10.18.2.2 | NodevplsGroups | |||
| 1.3.6.1.4.1.629.10.18.2.2.1 | GroupvplsBaseGroup | current | Objects that are common to all styles of VPLS configuration. | |
| 1.3.6.1.4.1.629.10.18.2.2.2 | GroupvplsManualPwGroup | current | Objects that are specific to VPLS configuration using manual PWs. | |
| 1.3.6.1.4.1.629.10.18.2.2.3 | GroupvplsAutoPwGroup | current | Objects that are specific to VPLS configuration using auto-created PWs. | |
| 1.3.6.1.4.1.629.10.18.2.2.4 | GroupvplsNotificationGroup | current | The group of notifications supporting the Notifications generated for VPLS instances. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VplsAcStatus | INTEGER { unknown(0), active(1), standby(2) } | current | The status of a VPLS Attachment Circuit. |
| VplsMCFloodMode | INTEGER { all(1), unknown(2), none(3) } | current | Which (if any) multicast frames should be flooded for a VPLS. |