DC-VPWS-MIB
62 objects
VPWS MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.10 | Nodeopx | |||
| 1.3.6.1.4.1.629.10.19 | IdentityvpwsMib | VPWS MIB. | ||
| 1.3.6.1.4.1.629.10.19.1 | NodevpwsObjects | |||
| 1.3.6.1.4.1.629.10.19.1.1 | TablevpwsConfigTable | not-accessible | current | VPWS Configuration Table. This table specifies information for configuring and monitoring Virtual Private Wire Services (VPWS). Note that any changes made to t… |
| 1.3.6.1.4.1.629.10.19.1.1.1 | RowvpwsConfigEntry | not-accessible | current | Represents a configured VPWS. |
| 1.3.6.1.4.1.629.10.19.1.1.1.2 | ColumnvpwsIndex | not-accessible | current | Index identifying the VPWS instance. |
| 1.3.6.1.4.1.629.10.19.1.1.1.3 | ColumnvpwsConfigRowStatus | read-create | current | The row status for this VPWS Configuration Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.19.1.1.1.4 | ColumnvpwsConfigAdminStatus | read-create | current | The administrative status of this VPWS instance, used to activate and deactivate the VPWS instance. |
| 1.3.6.1.4.1.629.10.19.1.1.1.5 | ColumnvpwsConfigOperStatus | read-only | current | The current operational state of this VPWS instance. If the operational status is 'up' then the VPWS is programmed in the data plane. |
| 1.3.6.1.4.1.629.10.19.1.1.1.6 | ColumnvpwsConfigName | read-create | current | A textual name of the VPWS instance. If there is no local name, or this field is otherwise not applicable, then this field MUST contain a zero-length octet str… |
| 1.3.6.1.4.1.629.10.19.1.1.1.7 | ColumnvpwsConfigDescr | read-create | current | A textual string containing information about the VPWS instance. If there is no information for this VPWS instance, then this field MUST contain a zero-length … |
| 1.3.6.1.4.1.629.10.19.1.1.1.8 | ColumnvpwsConfigADType | read-create | current | The auto-discovery protocol used by this VPWS. Changing this value will cause an interruption to data flow for this VPWS. |
| 1.3.6.1.4.1.629.10.19.1.1.1.9 | ColumnvpwsConfigSigType | read-create | current | The pseudowire signaling protocol used for auto-created PWs on this VPWS. If vpwsConfigADType is set to 'none' this field is ignored. If vpwsConfigADType is se… |
| 1.3.6.1.4.1.629.10.19.1.1.1.10 | ColumnvpwsConfigPwEncapType | read-create | current | The MPLS pseudowire encapsulation type used by this VPWS. Changing this value will cause an interruption to data flow for this VPWS. |
| 1.3.6.1.4.1.629.10.19.1.1.1.11 | ColumnvpwsConfigMtu | read-create | current | The layer 2 MTU of this VPWS. When using auto-discovery and signaling, this specifies the signaled layer 2 MTU. Changing this value will cause an interruption … |
| 1.3.6.1.4.1.629.10.19.1.1.1.12 | ColumnvpwsConfigControlWord | read-create | current | Whether or not the pseudowires use a PW control word. Changing this value will cause an interruption to data flow for this VPWS. |
| 1.3.6.1.4.1.629.10.19.1.1.1.13 | ColumnvpwsConfigSeqDelivery | read-create | current | Whether or not the pseudowires must provide sequenced delivery of traffic. Changing this value will cause an interruption to data flow for this VPWS. |
| 1.3.6.1.4.1.629.10.19.1.1.1.14 | ColumnvpwsConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPWS. See [RFC4364] for a complete definition of a route distinguisher. This is only used if BGP auto-discovery is enabled (vp… |
| 1.3.6.1.4.1.629.10.19.1.1.1.15 | ColumnvpwsConfigVpnId | read-create | current | The VPN ID to advertise as a BGP extended community, or zero if none. If the VPWS uses BGP auto-discovery and LDP signaling (vpwsConfigADType = bgp and vpwsCon… |
| 1.3.6.1.4.1.629.10.19.1.1.1.16 | ColumnvpwsConfigLocalSiteID | read-create | current | The local VPWS site ID, or zero if not specified. This is only used if BGP auto-discovery is enabled (vpwsConfigADType = bgp). It can be used with BGP or LDP s… |
| 1.3.6.1.4.1.629.10.19.1.1.1.17 | ColumnvpwsConfigLocalPreference | read-create | current | The preference that the local PE router is the designated forwarder for this VPWS. High values are preferred to low values. This is only used if BGP auto-disco… |
| 1.3.6.1.4.1.629.10.19.1.1.1.18 | ColumnvpwsConfigLabelBlockSize | read-create | current | The size of the label blocks for this VPWS. This is only used when using BGP auto-discovery with BGP signaling (vpwsConfigADType = bgp and vpwsConfigSigType = … |
| 1.3.6.1.4.1.629.10.19.1.1.1.19 | ColumnvpwsConfigIncludeCSV | read-create | current | Whether or not the BGP NLRI for this VPWS will include a Circuit Status Vector TLV. This is only used when using BGP auto-discovery with BGP signaling (vpwsCon… |
| 1.3.6.1.4.1.629.10.19.1.1.1.20 | ColumnvpwsConfigIgnoreMtuMismatch | read-create | current | This field specifies whether mismatches of MTU size with remote PE routers should be ignored for this VPWS. If this field is false, PWs will not be established… |
| 1.3.6.1.4.1.629.10.19.1.1.1.21 | ColumnvpwsConfigIgnoreEncapsMismatch | read-create | current | This field specifies whether mismatches of encapsulation type with remote PE routers should be ignored for this VPWS. If this field is false, PWs will not be e… |
| 1.3.6.1.4.1.629.10.19.1.2 | TablevpwsStatusTable | not-accessible | current | VPWS Status Table (read-only). This table reports the status of Virtual Private Wire Services (VPWS). |
| 1.3.6.1.4.1.629.10.19.1.2.1 | RowvpwsStatusEntry | not-accessible | current | Represents a VPWS. |
| 1.3.6.1.4.1.629.10.19.1.2.1.3 | ColumnvpwsStatusOperStatus | read-only | current | The current operational state of this VPWS instance. If the operational status is 'up' then the VPWS has been successfully activated. |
| 1.3.6.1.4.1.629.10.19.1.2.1.4 | ColumnvpwsStatusVcCount | read-only | current | The number of Virtual Circuits currently present in this VPWS instance. Specifically, this is number of local Attachment Circuits (ACs) bound to active pseudow… |
| 1.3.6.1.4.1.629.10.19.1.2.1.5 | ColumnvpwsStatusDesignatedForwarder | read-only | current | Whether or not the PE router is currently the elected Designated Forwarder for this VPWS instance. This field is only used if BGP auto-discovery is enabled (vp… |
| 1.3.6.1.4.1.629.10.19.1.3 | TablevpwsBindCfgTable | not-accessible | current | VPWS Binding Config Table. This table configures bindings of Attachment Circuits (ACs) to VPWS instances, pseudowires (PWs), and layer 2 local switching rules … |
| 1.3.6.1.4.1.629.10.19.1.3.1 | RowvpwsBindCfgEntry | not-accessible | current | Represents a configured VPWS binding. |
| 1.3.6.1.4.1.629.10.19.1.3.1.3 | ColumnvpwsBindCfgRowStatus | read-create | current | The row status for this VPWS Binding Configuration Table entry, used to create and destroy table entries. |
| 1.3.6.1.4.1.629.10.19.1.3.1.4 | ColumnvpwsBindCfgAdminStatus | read-create | current | The administrative status of this VPWS binding, used to activate and deactivate the VPWS binding. |
| 1.3.6.1.4.1.629.10.19.1.3.1.5 | ColumnvpwsBindCfgOperStatus | read-only | current | The current operational status of this VPWS binding. If the operational status is 'up' then the cross-connect for this binding is programmed in the data plane. |
| 1.3.6.1.4.1.629.10.19.1.3.1.6 | ColumnvpwsBindCfgVpwsIndex | read-create | current | Index identifying the VPWS instance. This field must be set to a non-zero value before the VPWS binding can go into operational status 'up'. Changing this valu… |
| 1.3.6.1.4.1.629.10.19.1.3.1.7 | ColumnvpwsBindCfgPwBindType | read-create | current | The VPWS pseudowire (PW) binding type. This field specifies the identifiers used for the PW to which the AC is bound. If the PW is provisioned in the pwTable, … |
| 1.3.6.1.4.1.629.10.19.1.3.1.8 | ColumnvpwsBindCfgPwSetIndex | read-create | current | Index for the set of PWs to which the AC should be bound. The AC is bound to every PW in the pwTable with pwRedundancySetId set to this value. This is only use… |
| 1.3.6.1.4.1.629.10.19.1.3.1.9 | ColumnvpwsBindCfgRemoteSiteID | read-create | current | The remote VPWS site ID of the PW to bind the AC to, or zero if not specified. This is only used if the pseudowire (PW) is created as a result of BGP auto-disc… |
| 1.3.6.1.4.1.629.10.19.1.3.1.10 | ColumnvpwsBindCfgLclSwitchIfIndex | read-create | current | Interface index that the AC should be bound to directly, via a layer 2 local switching rule (hairpin). Only relevant if the local PE hosts both VPWS sites conc… |
| 1.3.6.1.4.1.629.10.19.1.4 | TablevpwsBindTable | not-accessible | current | VPWS Binding Table (read-only). This table displays the Attachment Circuit (AC) bindings in a VPWS. Bindings are configured in the vpwsBindCfgTable. This table… |
| 1.3.6.1.4.1.629.10.19.1.4.1 | RowvpwsBindEntry | not-accessible | current | Represents a VPWS binding. |
| 1.3.6.1.4.1.629.10.19.1.4.1.4 | ColumnvpwsBindOperStatus | read-only | current | The current operational status of this VPWS binding. If the operational status is 'up' then the cross-connect for this binding is programmed in the data plane. |
| 1.3.6.1.4.1.629.10.19.1.4.1.5 | ColumnvpwsBindPwBindType | read-only | current | If the AC is bound to a pseudowire (PW) that is provisioned in the pwTable, then this field is set to pwMibIndex. If the AC is bound to a pseudowire that has b… |
| 1.3.6.1.4.1.629.10.19.1.4.1.6 | ColumnvpwsBindPwSetIndex | read-only | current | The PW set index of the PWs bound to this AC. The AC is bound to the (redundant) set of PWs corresponding to rows in the pwTable with pwRedundancySetId set to … |
| 1.3.6.1.4.1.629.10.19.1.4.1.7 | ColumnvpwsBindPwIfIndex | read-only | current | The interface index that has been assigned for the set of pseudowires to which this AC is bound. |
| 1.3.6.1.4.1.629.10.19.1.4.1.8 | ColumnvpwsBindLocalSiteID | read-only | current | The local VPWS site ID to which this AC is bound, or zero if not applicable. This is only relevant if vpwsBindPwBindType = lclRmtVeId. If vpwsBindPwBindType = … |
| 1.3.6.1.4.1.629.10.19.1.4.1.9 | ColumnvpwsBindRemoteSiteID | read-only | current | The remote VPWS site ID to which this AC is bound, or zero if not applicable. This is only relevant if vpwsBindPwBindType = lclRmtVeId. If vpwsBindPwBindType =… |
| 1.3.6.1.4.1.629.10.19.1.4.1.10 | ColumnvpwsBindLclSwitchIfIndex | read-only | current | The interface index of the AC bound to this AC directly in a layer 2 local switching rule (hairpin). If the vpwsBindPwBindType is pwMibIndex, then this value w… |
| 1.3.6.1.4.1.629.10.19.1.4.1.11 | ColumnvpwsBindRemoteRD | read-only | current | The remote route distinguisher, or null if not known. This is the route distinguisher of the best BGP route advertising the remote VPWS site ID. This is only r… |
| 1.3.6.1.4.1.629.10.19.1.4.1.12 | ColumnvpwsBindRemoteAddrType | read-only | current | The address family of the remote address. This is only relevant if vpwsBindPwBindType = lclRmtVeId. |
| 1.3.6.1.4.1.629.10.19.1.4.1.13 | ColumnvpwsBindRemoteAddr | read-only | current | The remote address, or null if not known. This is the address of the router advertising the best BGP route to the remote VPWS site ID. This is only relevant if… |
| 1.3.6.1.4.1.629.10.19.2 | NodevpwsConformance | |||
| 1.3.6.1.4.1.629.10.19.2.1 | NodevpwsCompliances | |||
| 1.3.6.1.4.1.629.10.19.2.1.1 | CompliancevpwsFullCompliance | current | The module is implemented with support for double-sided bindings and auto-created bindings using BGP auto-discovery. | |
| 1.3.6.1.4.1.629.10.19.2.1.2 | CompliancevpwsDoubleSidedCompliance | current | The module is implemented with support for double-sided bindings only. | |
| 1.3.6.1.4.1.629.10.19.2.1.3 | CompliancevpwsBgpADCompliance | current | The module is implemented with support for BPG auto-discovery only. | |
| 1.3.6.1.4.1.629.10.19.2.2 | NodevpwsGroups | |||
| 1.3.6.1.4.1.629.10.19.2.2.1 | GroupvpwsBaseGroup | current | Objects relating to common VPWS configuration. | |
| 1.3.6.1.4.1.629.10.19.2.2.2 | GroupvpwsDoubleSidedGroup | current | Objects specifically relating to configuration of a VPWS with double-sided bindings. | |
| 1.3.6.1.4.1.629.10.19.2.2.3 | GroupvpwsBgpADGroup | current | Objects specifically relating to configuration of a VPWS with BGP auto-discovery. |