DDN-WOS-MIB
143 objects
SMI v2 MIB module for WOS (Web Object Scalar).
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 enterprises Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6894 | Nodedatadirect | |||
| 1.3.6.1.4.1.6894.4 | Nodewos | |||
| 1.3.6.1.4.1.6894.4.1 | IdentitywosMIB | SMI v2 MIB module for WOS (Web Object Scalar). | ||
| 1.3.6.1.4.1.6894.4.1.0 | NodewosNotifications | |||
| 1.3.6.1.4.1.6894.4.1.0.1 | NotificationwosTrapMessage | current | This notification is sent whenever a cluster alert is generated. | |
| 1.3.6.1.4.1.6894.4.1.1 | NodewosObjects | |||
| 1.3.6.1.4.1.6894.4.1.1.1 | NodewosNotificationInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.1.1 | ScalarwosTrapDesc | accessible-for-notify | current | Description of the notification. |
| 1.3.6.1.4.1.6894.4.1.1.1.2 | ScalarwosTrapSeverity | accessible-for-notify | current | Severity of the notification. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix t… |
| 1.3.6.1.4.1.6894.4.1.1.1.3 | ScalarwosTrapType | accessible-for-notify | current | Identifies the type of the notification. |
| 1.3.6.1.4.1.6894.4.1.1.1.4 | ScalarwosTrapLocation | accessible-for-notify | current | A location pertaining to the notification (node IP address, cluster name, zone name, etc.) |
| 1.3.6.1.4.1.6894.4.1.1.2 | NodewosStatsInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.2.1 | ScalarwosStatsFRPS | read-only | current | Object read rate in file reads per second. |
| 1.3.6.1.4.1.6894.4.1.1.2.2 | ScalarwosStatsFWPS | read-only | current | Object write rate in file writes per second. |
| 1.3.6.1.4.1.6894.4.1.1.2.3 | ScalarwosStatsFDPS | read-only | current | Object delete rate in file deletes per second. |
| 1.3.6.1.4.1.6894.4.1.1.2.4 | ScalarwosStatsReadLatency | read-only | current | Object read latency in milliseconds. |
| 1.3.6.1.4.1.6894.4.1.1.2.5 | ScalarwosStatsWriteLatency | read-only | current | Object write latency in milliseconds. |
| 1.3.6.1.4.1.6894.4.1.1.2.6 | ScalarwosStatsDeleteLatency | read-only | current | Object delete latency in milliseconds. |
| 1.3.6.1.4.1.6894.4.1.1.2.7 | ScalarwosStatsReadThroughput | read-only | current | Object read throughput. |
| 1.3.6.1.4.1.6894.4.1.1.2.8 | ScalarwosStatsWriteThroughput | read-only | current | Object write throughput. |
| 1.3.6.1.4.1.6894.4.1.1.2.9 | ScalarwosStatsReadCount | read-only | current | Total number of read transactions since the last cluster restart. |
| 1.3.6.1.4.1.6894.4.1.1.2.10 | ScalarwosStatsWriteCount | read-only | current | Total number of write transactions since the last cluster restart. |
| 1.3.6.1.4.1.6894.4.1.1.2.11 | ScalarwosStatsDeleteCount | read-only | current | Total number of delete transactions since the last cluster restart. |
| 1.3.6.1.4.1.6894.4.1.1.3 | NodewosAlertsInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.3.1 | TablewosAlertTable | not-accessible | current | Table containing cluster alerts. |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1 | RowwosAlertEntry | not-accessible | current | An entry in wosAlertTable. |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.1 | ColumnwosAlertIndex | not-accessible | current | Alert table index. The most recent alert is assigned starting at index 1, and older alerts are assigned indices in ascending order. |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.2 | ColumnwosAlertSeverity | read-only | current | Severity of the alert. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the prob… |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.3 | ColumnwosAlertTime | read-only | current | Date and time the alert was generated. |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.4 | ColumnwosAlertType | read-only | current | Identifies the type of the alert. |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.5 | ColumnwosAlertLocation | read-only | current | A location pertaining to the alert (node IP address, cluster name, zone name, etc.) |
| 1.3.6.1.4.1.6894.4.1.1.3.1.1.6 | ColumnwosAlertDesc | read-only | current | Description of the alert. |
| 1.3.6.1.4.1.6894.4.1.1.4 | NodewosClusterInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.4.1 | ScalarwosClusterName | read-only | current | The name of the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.2 | ScalarwosClusterId | read-only | current | The ID number of the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.3 | ScalarwosClusterStatus | read-only | current | The cluster status. |
| 1.3.6.1.4.1.6894.4.1.1.4.4 | ScalarwosClusterPrimaryNodeAddressType | read-only | current | The IP address type of the primary cluster node. |
| 1.3.6.1.4.1.6894.4.1.1.4.5 | ScalarwosClusterPrimaryNodeAddress | read-only | current | The IP address of the cluster primary node. Refer to wosClusterPrimaryNodeAddress to determine the address type. |
| 1.3.6.1.4.1.6894.4.1.1.4.6 | ScalarwosClusterTotalNodeCount | read-only | current | The total number of nodes in the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.7 | ScalarwosClusterActiveNodeCount | read-only | current | The number of nodes in the cluster that are active. |
| 1.3.6.1.4.1.6894.4.1.1.4.8 | ScalarwosClusterDisconnectedNodeCount | read-only | current | Then number of nodes in the cluster that are disconnected. |
| 1.3.6.1.4.1.6894.4.1.1.4.9 | ScalarwosClusterConnectedClientsCount | read-only | current | The number of active client connections to the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.10 | ScalarwosClusterObjectCountLow | read-only | current | The total number of objects stored in the cluster. Together with wosClusterObjectCountHigh this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.4.11 | ScalarwosClusterObjectCountHigh | read-only | current | The total number of objects stored in the cluster. Together with wosClusterObjectCountLow this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.4.12 | ScalarwosClusterUsableCapacity | read-only | current | The usable capacity of the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.13 | ScalarwosClusterUsedCapacity | read-only | current | The used capacity of the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.4.14 | ScalarwosClusterFreeCapacity | read-only | current | Total free capacity of the cluster. |
| 1.3.6.1.4.1.6894.4.1.1.5 | NodewosZonesInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.5.1 | TablewosZoneTable | not-accessible | current | Table containing cluster zones. |
| 1.3.6.1.4.1.6894.4.1.1.5.1.1 | RowwosZoneEntry | not-accessible | current | An entry in wosZoneTable. |
| 1.3.6.1.4.1.6894.4.1.1.5.1.1.1 | ColumnwosZoneId | not-accessible | current | An integer that uniquely identifies the zone in the cluster and is the index value for wosZoneTable entries. |
| 1.3.6.1.4.1.6894.4.1.1.5.1.1.2 | ColumnwosZoneName | read-only | current | The name of the zone. |
| 1.3.6.1.4.1.6894.4.1.1.5.1.1.3 | ColumnwosZoneNodeCount | read-only | current | The number of nodes accepted into the zone. |
| 1.3.6.1.4.1.6894.4.1.1.6 | NodewosNodesInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.6.1 | TablewosNodeTable | not-accessible | current | Table containing cluster nodes. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1 | RowwosNodeEntry | not-accessible | current | An entry in wosNodeTable. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.1 | ColumnwosNodeIndex | not-accessible | current | An arbitrary integer used as the index value for wosNodeTable entries. The index value can change at any time. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.2 | ColumnwosNodeName | read-only | current | The node name. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.3 | ColumnwosNodeAddressType | read-only | current | The IP address type of the node. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.4 | ColumnwosNodeAddress | read-only | current | The IP address of the node. Refer to wosNodeAddressType to determine the address type. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.5 | ColumnwosNodeZoneName | read-only | current | The name of the zone that the node belongs to. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.6 | ColumnwosNodeStatus | read-only | current | The status of the node (e.g. active, connecting, etc.). |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.7 | ColumnwosNodeFwVersion | read-only | current | The version number of the node's firmware. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.8 | ColumnwosNodeObjectCountLow | read-only | current | The total number of objects stored on the node. Together with wosNodeObjectCountHigh this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.9 | ColumnwosNodeObjectCountHigh | read-only | current | The total number of objects stored on the node. Together with wosNodeObjectCountLow this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.10 | ColumnwosNodeTotalCapacity | read-only | current | The total capacity of the node. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.11 | ColumnwosNodeUsedCapacity | read-only | current | The used capacity of the node. |
| 1.3.6.1.4.1.6894.4.1.1.6.1.1.12 | ColumnwosNodePercentFull | read-only | current | The used capacity of the node as a percentage of the total capacity. |
| 1.3.6.1.4.1.6894.4.1.1.6.2 | TablewosPendingNodeTable | not-accessible | current | Table containing pending nodes. |
| 1.3.6.1.4.1.6894.4.1.1.6.2.1 | RowwosPendingNodeEntry | not-accessible | current | An entry in wosPendingNodeTable. |
| 1.3.6.1.4.1.6894.4.1.1.6.2.1.1 | ColumnwosPendingNodeIndex | not-accessible | current | An arbitrary integer used as the index value for wosPendingNodeTable entries. The index value can change at any time. |
| 1.3.6.1.4.1.6894.4.1.1.6.2.1.2 | ColumnwosPendingNodeAddressType | read-only | current | The IP address type of the pending node. |
| 1.3.6.1.4.1.6894.4.1.1.6.2.1.3 | ColumnwosPendingNodeAddress | read-only | current | The IP address of the pending node. Refer to wosPendingNodeAddressType to determine the address type. |
| 1.3.6.1.4.1.6894.4.1.1.6.2.1.4 | ColumnwosPendingNodeStatus | read-only | current | The status of the pending node (e.g. pending, pending (upgrading), etc.). |
| 1.3.6.1.4.1.6894.4.1.1.6.3 | TablewosNodeDriveTable | not-accessible | current | Table containing details about a node's disk drives. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1 | RowwosNodeDriveEntry | not-accessible | current | An entry in wosNodeDriveTable. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.1 | ColumnwosNodeDriveSlotNbr | not-accessible | current | The slot number of the node that the drive is installed in. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.2 | ColumnwosNodeDriveNodeName | read-only | current | The name of the node that the drive is installed in. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.3 | ColumnwosNodeDriveMfgr | read-only | current | The drive manufacturer. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.4 | ColumnwosNodeDriveModel | read-only | current | The drive model number. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.5 | ColumnwosNodeDriveSerialNbr | read-only | current | The drive serial number. |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.6 | ColumnwosNodeDriveStatus | read-only | current | The status of the drive (e.g. down, not present, etc.). |
| 1.3.6.1.4.1.6894.4.1.1.6.3.1.7 | ColumnwosNodeDriveCapacity | read-only | current | The total capacity of the drive. |
| 1.3.6.1.4.1.6894.4.1.1.7 | NodewosPoliciesInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.7.1 | TablewosPolicyTable | not-accessible | current | Table containing policies. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1 | RowwosPolicyEntry | not-accessible | current | An entry in wosPolicyTable. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.1 | ColumnwosPolicyIndex | not-accessible | current | An arbitrary integer used as an index value for wosPolicyTable entries. The index value can change at any time. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.2 | ColumnwosPolicyReplicaIndex | not-accessible | current | An integer used as an index value for a zone replica in wosPolicyTable entries. The first zone replica in a policy is assigned starting at index 1 and the rema… |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.3 | ColumnwosPolicyId | read-only | current | The ID number of the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.4 | ColumnwosPolicyName | read-only | current | The name of the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.5 | ColumnwosPolicyReplicaZoneName | read-only | current | The name of the zone containing replicas for the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.6 | ColumnwosPolicyReplicaCount | read-only | current | The number of replicas in the zone for the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.7 | ColumnwosPolicyReplicationType | read-only | current | The replication type of the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.8 | ColumnwosPolicyLocalDataProtection | read-only | current | True if local data protection is enabled for the policy. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.9 | ColumnwosPolicyObjCountLow | read-only | current | The total number of objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.10 | ColumnwosPolicyObjCountHigh | read-only | current | The total number of objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.11 | ColumnwosPolicyNonComplObjCountLow | read-only | current | The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.12 | ColumnwosPolicyNonComplObjCountHigh | read-only | current | The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number. |
| 1.3.6.1.4.1.6894.4.1.1.7.1.1.13 | ColumnwosPolicyUsedCapacity | read-only | current | The total capacity used by the policy. |
| 1.3.6.1.4.1.6894.4.1.1.8 | NodewosPrefsInfo | |||
| 1.3.6.1.4.1.6894.4.1.1.8.1 | ScalarwosPrefStoreUnderReplObjs | read-only | current | True if storage of under-replicated objects is allowed. |
| 1.3.6.1.4.1.6894.4.1.1.8.2 | ScalarwosPrefNodeDownDelay | read-only | current | The node down delay time. |
| 1.3.6.1.4.1.6894.4.1.1.8.3 | ScalarwosPrefEmailAlertNewInterval | read-only | current | The minimum delay time between notifications of new alerts. |
| 1.3.6.1.4.1.6894.4.1.1.8.4 | ScalarwosPrefEmailAlertRmndrInterval | read-only | current | The minimum delay time between reminders of existing alerts. |
| 1.3.6.1.4.1.6894.4.1.1.8.5 | ScalarwosPrefEmailAlertFromAddr | read-only | current | The From address for email alerts. |
| 1.3.6.1.4.1.6894.4.1.1.8.6 | TablewosPrefEmailAlertRecipientTable | not-accessible | current | Table containing email alert recipients. |
| 1.3.6.1.4.1.6894.4.1.1.8.6.1 | RowwosPrefEmailAlertRecipientEntry | not-accessible | current | An entry in wosPrefEmailAlertRecipientTable. |
| 1.3.6.1.4.1.6894.4.1.1.8.6.1.1 | ColumnwosPrefEmailAlertRecipientIndex | not-accessible | current | Email alert table index. |
| 1.3.6.1.4.1.6894.4.1.1.8.6.1.2 | ColumnwosPrefEmailAlertRecipient | read-only | current | The email alert recipient. |
| 1.3.6.1.4.1.6894.4.1.1.8.7 | TablewosPrefEmailAlertServerTable | not-accessible | current | Table containing outgoing email servers for email alerts. |
| 1.3.6.1.4.1.6894.4.1.1.8.7.1 | RowwosPrefEmailAlertServerEntry | not-accessible | current | An entry in wosPrefEmailAlertServerTable. |
| 1.3.6.1.4.1.6894.4.1.1.8.7.1.1 | ColumnwosPrefEmailAlertServerIndex | not-accessible | current | Email alert server table index. |
| 1.3.6.1.4.1.6894.4.1.1.8.7.1.2 | ColumnwosPrefEmailAlertServer | read-only | current | The outgoing email server for email alerts. |
| 1.3.6.1.4.1.6894.4.1.1.8.8 | TablewosPrefSnmpManagerTable | not-accessible | current | Table containing SNMP managers. |
| 1.3.6.1.4.1.6894.4.1.1.8.8.1 | RowwosPrefSnmpManagerEntry | not-accessible | current | An entry in wosPrefSnmpManagerTable. |
| 1.3.6.1.4.1.6894.4.1.1.8.8.1.1 | ColumnwosPrefSnmpManagerIndex | not-accessible | current | SNMP Manager table index. |
| 1.3.6.1.4.1.6894.4.1.1.8.8.1.2 | ColumnwosPrefSnmpManager | read-only | current | The SNMP manager. |
| 1.3.6.1.4.1.6894.4.1.1.8.9 | ScalarwosPrefSnmpTrapCommunityName | read-only | current | The community name for the SNMP traps. |
| 1.3.6.1.4.1.6894.4.1.1.8.10 | TablewosPrefMgmtIpFilterTable | not-accessible | current | Table containing management IP filters. |
| 1.3.6.1.4.1.6894.4.1.1.8.10.1 | RowwosPrefMgmtIpFilterEntry | not-accessible | current | An entry in wosPrefMgmtIpFilterTable. |
| 1.3.6.1.4.1.6894.4.1.1.8.10.1.1 | ColumnwosPrefMgmtIpFilterIndex | not-accessible | current | Management IP filter table index. |
| 1.3.6.1.4.1.6894.4.1.1.8.10.1.2 | ColumnwosPrefMgmtIpFilter | read-only | current | The management IP filter. |
| 1.3.6.1.4.1.6894.4.1.1.8.11 | TablewosPrefClientIpFilterTable | not-accessible | current | Table containing client I/O IP filters. |
| 1.3.6.1.4.1.6894.4.1.1.8.11.1 | RowwosPrefClientIpFilterEntry | not-accessible | current | An entry in wosPrefClientIpFilterTable. |
| 1.3.6.1.4.1.6894.4.1.1.8.11.1.1 | ColumnwosPrefClientIpFilterIndex | not-accessible | current | Client I/O IP filter table index. |
| 1.3.6.1.4.1.6894.4.1.1.8.11.1.2 | ColumnwosPrefClientIpFilter | read-only | current | The client I/O IP filter. |
| 1.3.6.1.4.1.6894.4.1.1.8.12 | ScalarwosPrefSyslogFacility | read-only | current | The Syslog Facility. user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog… |
| 1.3.6.1.4.1.6894.4.1.1.8.13 | ScalarwosPrefSyslogRemoteHost | read-only | current | The remote syslog host. |
| 1.3.6.1.4.1.6894.4.1.2 | NodewosConformance | |||
| 1.3.6.1.4.1.6894.4.1.2.1 | NodewosCompliances | |||
| 1.3.6.1.4.1.6894.4.1.2.1.1 | CompliancewosCompliance | current | The compliance statement for WOS nodes implementing the DDN-WOS-MIB. | |
| 1.3.6.1.4.1.6894.4.1.2.2 | NodewosGroups | |||
| 1.3.6.1.4.1.6894.4.1.2.2.1 | GroupwosEventsGroup | current | This groups defines the set of notification types. | |
| 1.3.6.1.4.1.6894.4.1.2.2.2 | GroupwosNotificationsGroup | current | This group defines the set of notification objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.3 | GroupwosStatsGroup | current | This group defines the set of statistics objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.4 | GroupwosAlertsGroup | current | This group defines the set of alert objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.5 | GroupwosClusterGroup | current | This group defines the set of cluster objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.6 | GroupwosZonesGroup | current | This group defines the set of zone objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.7 | GroupwosNodesGroup | current | This group defines the set of node objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.8 | GroupwosPoliciesGroup | current | This group defines the set of policy objects. | |
| 1.3.6.1.4.1.6894.4.1.2.2.9 | GroupwosPrefsGroup | current | This group defines the set of preferences objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| WosSeverityLevel | INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), informational(7), debug(8) } | current | Specifies the severity level of an event: emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Sh… |
| WosSyslogFacility | INTEGER { user(1), mail(2), daemon(3), auth(4), syslog(5), lpr(6), news(7), uucp(8), cron(9), authpriv(10), ftp(11), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23) } | current | The syslog standard Facilities (from RFC 3164). user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated interna… |