DELL-NETWORKING-DCB-MIB
111 objects
The proprietary extension MIB module for Dell Networking OS DCB and DCBX.
Imported Objects
| DELL-NETWORKING-SMI | dellNetMgmt |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.15 | IdentitydellNetDcb | The proprietary extension MIB module for Dell Networking OS DCB and DCBX. | ||
| 1.3.6.1.4.1.6027.3.15.1 | NodedellNetDcbSystem | |||
| 1.3.6.1.4.1.6027.3.15.1.1 | ScalardellNetDcbPfcMinThreshold | read-only | current | The minimum PFC(Priority Based Flow Control) threshold for the switch. This Object indicates the minimum Receive queue buffer count. The minimum and maximum va… |
| 1.3.6.1.4.1.6027.3.15.1.2 | ScalardellNetDcbPfcMaxThreshold | read-only | current | The maximum PFC(Priority Based Flow Control)threshold for the switch. This Object indicates the maximum Receive queue buffer count. The minimum and maximum val… |
| 1.3.6.1.4.1.6027.3.15.1.3 | ScalardellNetDcbMaxPfcProfiles | read-only | current | The maximum number of PFC(Priority Based Flow Control)profiles supported by the device. A PFC profile is a bitmap, containing the status of PFC for all the pri… |
| 1.3.6.1.4.1.6027.3.15.2 | NodedellNetDcbObjects | |||
| 1.3.6.1.4.1.6027.3.15.2.1 | TabledellNetDcbPortTable | not-accessible | obsolete | Port table contains the DCB features (Enhanced Transmission Selection/Priortiy Based Flow Control) status (enabled or disabled). |
| 1.3.6.1.4.1.6027.3.15.2.1.1 | RowdellNetDcbPortEntry | not-accessible | obsolete | An entry containing DCB control parameters for a particular port. |
| 1.3.6.1.4.1.6027.3.15.2.1.1.1 | ColumndellNetDcbPortNumber | not-accessible | obsolete | This indicates the interface identifier for which the Dcb configuration is applied. |
| 1.3.6.1.4.1.6027.3.15.2.1.1.2 | ColumndellNetDcbETSAdminStatus | read-only | obsolete | This object is used to display if ETS feature is enabled or disabled on the given port. |
| 1.3.6.1.4.1.6027.3.15.2.1.1.3 | ColumndellNetDcbPFCAdminStatus | read-only | obsolete | This object is used to display if PFC feature is enabled or disabled on the given port. |
| 1.3.6.1.4.1.6027.3.15.3 | NodedellNetDcbApplicationObjects | |||
| 1.3.6.1.4.1.6027.3.15.3.1 | NodedellNetDCBXObjects | |||
| 1.3.6.1.4.1.6027.3.15.3.1.1 | NodedellNetDCBXScalars | |||
| 1.3.6.1.4.1.6027.3.15.3.1.1.1 | ScalardellNetDcbxGlobalTraceLevel | read-write | current | This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer… |
| 1.3.6.1.4.1.6027.3.15.3.1.1.2 | ScalardellNetDCBXGlobalVersion | read-write | current | CIN is Cisco Intel Nuova DCBX (version 1.0). CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX … |
| 1.3.6.1.4.1.6027.3.15.3.1.2 | TabledellNetDCBXPortTable | not-accessible | current | Port table contains the DCBX feature status (enabled or disabled). |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1 | RowdellNetDCBXPortEntry | not-accessible | current | An entry containing DCBX control parameters for a particular port. |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.1 | ColumndellNetDCBXPortNumber | not-accessible | current | This indicates the interface identifier for which the DCBX configuration is applied. |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.2 | ColumndellNetDCBXAdminStatus | read-only | current | This object is used to display if DCBX feature is enabled(1) or disabled(2) on the given port. |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.3 | ColumndellNetDCBXAutoCfgPortRole | read-write | current | Ports operating in the manual role do not have their configuration affected by peer devices or by internal propagation of configuration. These ports will adver… |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.4 | ColumndellNetDCBXPortVersion | read-write | current | CIN is Cisco Intel Nuova DCBX (version 1.0). CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX … |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.5 | ColumndellNetDCBXPortSupportedTLVs | read-only | current | Bitmap that includes the supported set of DCBX LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network manageme… |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.6 | ColumndellNetDCBXPortConfigTLVsTxEnable | read-write | current | Bitmap that includes the DCBX defined set of LLDP TLVs whose transmission is enabled on the local LLDP agent by network management. Having the bit 'pfc(0)' set… |
| 1.3.6.1.4.1.6027.3.15.3.1.3 | TabledellNetDCBXPortStatusTable | not-accessible | current | . |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1 | RowdellNetDCBXPortStatusEntry | not-accessible | current | . |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.2 | ColumndellNetDCBXPortOperVersion | read-only | current | Specifies the DCBX mode in which the interface is currently operating. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.3 | ColumndellNetDCBXPortPeerMACaddress | read-only | current | MAC Address of the DCBX peer. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.4 | ColumndellNetDCBXPortCfgSource | read-only | current | Indicates if this port is the source of configuration information for auto-* ports. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.5 | ColumndellNetDCBXOperStatus | read-only | current | This object gives information on the operational status of DCBX on the given port. Enabled(1) indicates DCBX on the port is in sync with the remote and is oper… |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.6 | ColumndellNetDCBXPortMultiplePeerCount | read-only | current | Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.7 | ColumndellNetDCBXPortPeerRemovedCount | read-only | current | . |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.8 | ColumndellNetDCBXPortPeerOperVersionNum | read-only | current | Specifies the operational version of the peer DCBX device. Valid only when peer device is a CEE/CIN DCBX device. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.9 | ColumndellNetDCBXPortPeerMaxVersion | read-only | current | Specifies the max version of the peer DCBX device. Valid only when peer device is CEE/CIN DCBX device. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.10 | ColumndellNetDCBXPortSeqNum | read-only | current | Specifies the current sequence number that is sent in DCBX control TLVs in CEE/CIN Mode. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.11 | ColumndellNetDCBXPortAckNum | read-only | current | Specifies the current ACK number that is to be sent to peer in DCBX control TLVs in CEE/CIN Mode. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.12 | ColumndellNetDCBXPortPeerRcvdAckNum | read-only | current | Specifies the current ACK number that is sent by peer in DCBX control TLV in CEE/CIN Mode. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.13 | ColumndellNetDCBXPortTxCount | read-only | current | The number of DCBX frames transmitted per interface. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.14 | ColumndellNetDCBXPortRxCount | read-only | current | The number of DCBX frames received per interface. |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.15 | ColumndellNetDCBXPortErrorFramesCount | read-only | current | The number of DCBX frames discarded due to errors in the frame. |
| 1.3.6.1.4.1.6027.3.15.3.2 | NodedellNetETSObjects | |||
| 1.3.6.1.4.1.6027.3.15.3.2.1 | NodedellNetETSScalars | |||
| 1.3.6.1.4.1.6027.3.15.3.2.1.1 | ScalardellNetETSSystemControl | read-only | current | The ETS(Enhanced Transmission selection) system control status for the switch. It indicates whether ETS Module in the system is running or shutdown. When this … |
| 1.3.6.1.4.1.6027.3.15.3.2.1.2 | ScalardellNetETSModuleStatus | read-only | current | The ETS(Enhanced Transmission Selection) Module status for the switch. If this object returns with 'disabled', then all the ports have the ETS feature disabled… |
| 1.3.6.1.4.1.6027.3.15.3.2.1.3 | ScalardellNetETSClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the ETS Module: dellNetETSConfTxTLVCounter, dellNetETSConfRxTLVCounter, dellNetETSConfRxTLVErro… |
| 1.3.6.1.4.1.6027.3.15.3.2.1.4 | ScalardellNetETSGlobalEnableTrap | read-only | current | This object indicates whether the transmission of TRAP notification messages for ETS feature is enabled or disabled. |
| 1.3.6.1.4.1.6027.3.15.3.2.2 | TabledellNetETSPortTable | not-accessible | current | ETS Port table contains the ETS (Enhanced Transmission Selection) features information specific to this port. An entry created in this table in the following t… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1 | RowdellNetETSPortEntry | not-accessible | current | An entry containing ETS control parameters and ETS information for a particular port. |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.1 | ColumndellNetETSPortNumber | not-accessible | current | This indicates the interface identifier for which the ETS configuration is applied. |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.2 | ColumndellNetETSAdminMode | read-only | current | This object is used to display the Admin mode for ETS feature on the given port. If the mode is 'on(1)',ETS feature is enabled on this port. ETS configurations… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.3 | ColumndellNetETSDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the ETS feature on the given port. If state is Off '(0)', then ETS Operational(l… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.4 | ColumndellNetETSDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the ETS feature on the given port. |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.5 | ColumndellNetETSOperStatus | read-only | current | This object gives information on the operational status of ETS on the given port. Enabled(1) indicates ETS on the port is in sync with the remote and is operat… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.6 | ColumndellNetETSClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: dellNetETSConfTxTLVCounter, dellNetETSConfRxTLVCounter, dellNetETSConfRxTLV… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.7 | ColumndellNetETSConfTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS configuration TLV that are transmitted from this port. This counter will be incremented every time when … |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.8 | ColumndellNetETSConfRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS ConfigurationTLV that are received in this port. This counter will be incremented every time when there … |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.9 | ColumndellNetETSConfRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Conf TLVs received by ETS. This counter will be incremented every time a ETS Conf TLV is dropped b… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.10 | ColumndellNetETSRecoTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are transmitted from this port. This counter will be incremented every time when… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.11 | ColumndellNetETSRecoRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are received in this port. This counter will be incremented every time when ther… |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.12 | ColumndellNetETSRecoRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Reco TLVs received by ETS. This counter will be incremented every time a ETS Reco TLV is dropped b… |
| 1.3.6.1.4.1.6027.3.15.3.3 | NodedellNetPFCObjects | |||
| 1.3.6.1.4.1.6027.3.15.3.3.1 | NodedellNetPFCScalars | |||
| 1.3.6.1.4.1.6027.3.15.3.3.1.1 | ScalardellNetPFCSystemControl | read-only | current | The PFC(Priority Based Flow Control) system control status for the switch. It indicates whether PFC Module in the system is running or shutdown. When this obje… |
| 1.3.6.1.4.1.6027.3.15.3.3.1.2 | ScalardellNetPFCModuleStatus | read-only | current | The PFC(Priority Based Flow Control) Module status for the switch. If this object returns with 'disabled', then all the ports have the PFC feature disabled in … |
| 1.3.6.1.4.1.6027.3.15.3.3.1.3 | ScalardellNetPFCClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the PFC Module: dellNetPFCTxTLVCounter, dellNetPFCRxTLVCounter, dellNetPFCRxTLVErrors. Setting … |
| 1.3.6.1.4.1.6027.3.15.3.3.1.4 | ScalardellNetPFCGlobalEnableTrap | read-only | current | This object indicates whether the transmission of TRAP notification messages for PFC feature is enabled or disabled. |
| 1.3.6.1.4.1.6027.3.15.3.3.2 | TabledellNetPFCPortTable | not-accessible | current | PFC Port table contains the PFC (Priortiy Based Flow Control) features information specific to this port. An entry created in the port table populates the entr… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1 | RowdellNetPFCPortEntry | not-accessible | current | An entry containing PFC control parameters and PFC information for a particular port. |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.1 | ColumndellNetPFCPortNumber | not-accessible | current | This indicates the interface identifier for which the PFC configuration is applied. |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.2 | ColumndellNetPFCAdminMode | read-only | current | This object is used to display Admin mode for PFC feature on the given port. If mode is 'on(1)',PFC feature is enabled on this port. PFC configurations, either… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.3 | ColumndellNetPFCDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the PFC feature on the given port. If state is Off '(0)', then PFC Operational(l… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.4 | ColumndellNetPFCDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the PFC feature on the given port. |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.5 | ColumndellNetPFCOperStatus | read-only | current | This object gives information on the operational status of PFC on the given port. Enabled(1) indicates PFC on the port is in sync with the remote and is operat… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.6 | ColumndellNetPFCClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: dellNetPFCTxTLVCounter, dellNetPFCRxTLVCounter, dellNetPFCRxTLVErrors. Sett… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.7 | ColumndellNetPFCTxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are transmitted from this port. This counter will be incremented every time when there is PFC T… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.8 | ColumndellNetPFCRxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are received in this port. This counter will be incremented every time when there is PFC TLV is… |
| 1.3.6.1.4.1.6027.3.15.3.3.2.1.9 | ColumndellNetPFCRxTLVErrors | read-only | current | This object is used to keep track of number of malformed TLVs received by PFC. This counter will be incremented every time a PFC-TLV is dropped by PFC. |
| 1.3.6.1.4.1.6027.3.15.4 | NodedellNetDcbNotificationObjects | |||
| 1.3.6.1.4.1.6027.3.15.4.0 | NodedellNetDCBTraps | |||
| 1.3.6.1.4.1.6027.3.15.4.0.1 | NotificationdellNetETSModuleStatusTrap | current | This trap is generated when there is a change in the ETS Module status. This trap is generated only if dellNetETSGlobalEnableTrap is enabled to send the trap. | |
| 1.3.6.1.4.1.6027.3.15.4.0.2 | NotificationdellNetETSPortAdminStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the ETS Admin status and the dellNetETSGlobalEnableTrap is enabled to send th… | |
| 1.3.6.1.4.1.6027.3.15.4.0.3 | NotificationdellNetETSPortPeerStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the DCBX Peer Status and the dellNetETSGlobalEnableTrap is enabled to send th… | |
| 1.3.6.1.4.1.6027.3.15.4.0.4 | NotificationdellNetETSPortDcbxOperStateTrap | current | This trap is generated in the following conditions. Whenever there is a change in the ETS Operational State and the dellNetETSGlobalEnableTrap is enabled to se… | |
| 1.3.6.1.4.1.6027.3.15.4.0.5 | NotificationdellNetPFCModuleStatusTrap | current | This trap is generated when there is a change in the PFC Module status is enabled. This trap is generated only if dellNetPFCGlobalEnableTrap is enabled to send… | |
| 1.3.6.1.4.1.6027.3.15.4.0.6 | NotificationdellNetPFCPortAdminStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the PFC Admin Status and the dellNetPFCGlobalEnableTrap is enabled to send th… | |
| 1.3.6.1.4.1.6027.3.15.4.0.7 | NotificationdellNetPFCPortPeerStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the DCBX Peer Status and the dellNetPFCGlobalEnableTrap is enabled to send th… | |
| 1.3.6.1.4.1.6027.3.15.4.0.8 | NotificationdellNetPFCPortDcbxOperStateTrap | current | This trap is generated in the following conditions. Whenever there is a change in the PFC Operational State and the dellNetPFCGlobalEnableTrap is enabled to se… | |
| 1.3.6.1.4.1.6027.3.15.4.1 | NodedellNetDCBTrapObjects | |||
| 1.3.6.1.4.1.6027.3.15.4.1.1 | ScalardellNetDcbTrapPortNumber | accessible-for-notify | current | This object refers to the Port number for which the DCBX feature is enabled. And will be used in sending the feature port specific Traps. |
| 1.3.6.1.4.1.6027.3.15.4.1.2 | ScalardellNetDcbPeerUpStatus | accessible-for-notify | current | This object refers to the DCBX Peer Up or Peer down status on the port. If the value is 'true', then the DCBX Peer will be present and UP. If the value is 'fal… |
| 1.3.6.1.4.1.6027.3.15.5 | NodedellNetDCBMibConformance | |||
| 1.3.6.1.4.1.6027.3.15.5.1 | NodedellNetDCBMibCompliances | |||
| 1.3.6.1.4.1.6027.3.15.5.1.1 | CompliancedellNetDCBMibComplianceRev1 | current | The compliance statement for Dell Networking OS product which implement the Dell Networking OS dcbx MIB. | |
| 1.3.6.1.4.1.6027.3.15.5.1.2 | CompliancedellNetDCBMibCompliance | obsolete | The compliance statement for Dell Networking OS product which implement the Dell Networking OS dcb MIB. This module consists of the obsolete MIB objects. | |
| 1.3.6.1.4.1.6027.3.15.5.2 | NodedellNetDCBMibGroups | |||
| 1.3.6.1.4.1.6027.3.15.5.2.1 | GroupdellNetDcbSystemObjectGroup | current | This group represents a collection of objects providing the DCB system information. | |
| 1.3.6.1.4.1.6027.3.15.5.2.2 | GroupdellNetDcbObjectGroup | obsolete | This group represents a collection of objects providing the information on the DCB control parameters for a particular port. | |
| 1.3.6.1.4.1.6027.3.15.5.2.3 | GroupdellNetDcbxScalarsGroup | current | This group represents the DCBX scalars in the DellNet DCB mib. | |
| 1.3.6.1.4.1.6027.3.15.5.2.4 | GroupdellNetDCBXPortTableGroup | current | This group contains the collection of objects describing the DCBX specific information on the particular port. | |
| 1.3.6.1.4.1.6027.3.15.5.2.5 | GroupdellNetETSScalarsGroup | current | This object represents the collection of objects providing the ETS Information on the system. | |
| 1.3.6.1.4.1.6027.3.15.5.2.6 | GroupdellNetETSPortTableGroup | current | This object group represents the collection of objects providing ETS specific status information on a specific port. | |
| 1.3.6.1.4.1.6027.3.15.5.2.7 | GroupdellNetPFCScalarsGroup | current | This group represents a collection of objects providing the system information related to PFC. | |
| 1.3.6.1.4.1.6027.3.15.5.2.8 | GroupdellNetPFCPortTableGroup | current | This group represents a collection of objects providing the PFC specific status information per port. | |
| 1.3.6.1.4.1.6027.3.15.5.2.9 | GroupdellNetDCBNotificationObjectsGroup | current | This object group represents the collection of objects used by the notification group dellNetDCBNotificationsGroup. | |
| 1.3.6.1.4.1.6027.3.15.5.2.10 | GroupdellNetDCBNotificationsGroup | current | A collection on notification objects in the DellNet-DCB mib |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcbAdminMode | INTEGER { on(1), off(2)} | current | 'on(1)', In this mode, the configurations, either from this system or the remote system will take effect based on DCBX negotiations. 'off(2)', In this mode, all the operational(local) parameters for the feature will be … |
| DcbState | INTEGER { off(0), init(1), rxrecommended(2), internallypropagated(3) } | current | The state of the DCBX state machine. off '(0)', In this state all Operational(local) parameters for the feature will be same as Admin Configuration parameters but will not be operational in the system(hardware). init '(… |
| DcbStateMachineType | INTEGER { asymmetric(1), symmetric(2), feature(3) } | current | asymmetric'(1)',By using this state machine the operational parameters for the DCB feature can be same as peer or not. symmetric '(2)',By using this state machine the operational parameters for the DCB feature will be s… |
| DcbxPortRole | INTEGER { manual(1), autoup(2), autodown(3), configSource(4) } | current | . |
| DcbxVersion | INTEGER { auto(1), ieee(2), cin(3), cee(4) } | current | . |
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |