DELL-NETWORKING-IF-EXTENSION-MIB
82 objects
Dell Networking OS IF Extenstion MIB.
Imported Objects
| DELL-NETWORKING-SMI | dellNetMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.11 | IdentitydellNetIfExtensionMib | Dell Networking OS IF Extenstion MIB. | ||
| 1.3.6.1.4.1.6027.3.11.1 | NodedellNetIfExtensionMibObject | |||
| 1.3.6.1.4.1.6027.3.11.1.1 | NodedellNetIfExtensionParams | |||
| 1.3.6.1.4.1.6027.3.11.1.1.1 | TabledellNetIfTable | not-accessible | current | Dell Networking OS Extension ifTable contains generic interface parameters. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1 | RowdellNetIfEntry | not-accessible | current | A row defintion of Dell Networking OS Interface Extension parameters. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.1 | ColumndellNetIfIpMtu | read-write | current | The IP (Internet Protocol), Maximum Transmission Unit value. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.2 | ColumndellNetIfDuplexMode | read-write | current | Duplex mode of the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.3 | ColumndellNetIfQueueingStrategy | read-only | current | Queueing strategy used for packets. |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.4 | ColumndellNetIfRxFlowCtrl | read-write | current | Flow control receive. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.5 | ColumndellNetIfTxFlowCtrl | read-write | current | Flow Control transmit.This will be read-only only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.6 | ColumndellNetIfDescr | read-write | current | A textual string containing information about the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.7 | ColumndellNetIfAdminStatus | read-write | current | A admin status of any interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.8 | ColumndellNetIfRateInterval | read-write | current | The rate info interval for the interface. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.9 | ColumndellNetIfSpeed | read-write | current | The interface's current bandwidth in bits per second. This will be read-write only for s60 |
| 1.3.6.1.4.1.6027.3.11.1.1.1.1.10 | ColumndellNetIfPortListBitPos | read-only | current | This is used for identifying the bit position in PortList Object for a given interface. |
| 1.3.6.1.4.1.6027.3.11.1.2 | NodedellNetIfExtensionStats | |||
| 1.3.6.1.4.1.6027.3.11.1.2.1 | TabledellNetIfStaticsTable | not-accessible | current | The statistcs information of the interfaces for performance monitoring. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1 | RowdellNetIfStaticsEntry | not-accessible | current | A row defintion of Dell Networking OS Extension interface statistics. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.1 | ColumndellNetIfInVlanPkts | read-only | current | The total number of valid VLAN Tagged frames received. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.2 | ColumndellNetIfIn64BytePkts | read-only | current | The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets). |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.3 | ColumndellNetIfIn65To127BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.4 | ColumndellNetIfIn128To255BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.5 | ColumndellNetIfIn256To511BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS o… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.6 | ColumndellNetIfIn512To1023BytePkts | read-only | current | The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.7 | ColumndellNetIfInOver1023BytePkts | read-only | current | The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and w… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.8 | ColumndellNetIfInThrottles | read-only | current | This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.9 | ColumndellNetIfInRunts | read-only | current | The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.10 | ColumndellNetIfInGiants | read-only | current | The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and w… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.11 | ColumndellNetIfInCRC | read-only | current | The total number of frames received that had a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a b… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.12 | ColumndellNetIfInOverruns | read-only | current | The total number of frames dropped because of buffer issue. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.13 | ColumndellNetIfOutVlanPkts | read-only | current | The Number of Good VLAN Tagged Frames sent successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.14 | ColumndellNetIfOutUnderruns | read-only | current | The total number of frames dropped because of buffer underrun. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.15 | ColumndellNetIfOutUnicasts | read-only | current | The Number of Good Unicast Frames sent successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.16 | ColumndellNetIfOutCollisions | read-only | current | A count of the frames that due to excessive or late collisions are not transmitted successfully. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.17 | ColumndellNetIfOutWredDrops | read-only | current | A count of the frames that are dropped using WRED policy because of to excessive traffic. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.18 | ColumndellNetIfOut64BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was 64 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.19 | ColumndellNetIfOut65To127BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 65 to 127 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.20 | ColumndellNetIfOut128To255BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 128 to 255 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.21 | ColumndellNetIfOut256To511BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 256 to 511 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.22 | ColumndellNetIfOut512To1023BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was in the range of 512 to 1023 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.23 | ColumndellNetIfOutOver1023BytePkts | read-only | current | The Number of Good Frames sent successfully whose size was greater than 1023 Bytes. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.24 | ColumndellNetIfOutThrottles | read-only | current | This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.25 | ColumndellNetIfLastDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occ… |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.26 | ColumndellNetIfInCentRate | read-only | current | This is the ingress rate in percentage. This is an integer value which can go from 0 to 100. |
| 1.3.6.1.4.1.6027.3.11.1.2.1.1.27 | ColumndellNetIfOutCentRate | read-only | current | This is the egress rate in percentage. This is an integer value which can go from 0 to 100. |
| 1.3.6.1.4.1.6027.3.11.1.3 | NodedellNetIfTransceiverData | |||
| 1.3.6.1.4.1.6027.3.11.1.3.1 | TabledellNetIfTransceiverDataTable | not-accessible | current | The information to monitor transceiver data. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1 | RowdellNetIfTransceiverDataEntry | not-accessible | current | A row defintion of Dell Networking OS Extension transceiver data. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.1 | ColumndellNetIfTransDeviceName | read-only | current | TransceiverData - DeviceName |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.2 | ColumndellNetIfTransPort | read-only | current | TransceiverData - Port |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.3 | ColumndellNetIfTransOpticsPresent | read-only | current | TransceiverData - OpticsPresent shows the presence of optic. The possible values are 1 when the optic is inserted and 2 when the optic is not inserted. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.4 | ColumndellNetIfTransOpticsType | read-only | current | TransceiverData - Type |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.5 | ColumndellNetIfTransVendorName | read-only | current | TransceiverData - Name |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.6 | ColumndellNetIfTransPartNumber | read-only | current | TransceiverData - PartNumber |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.7 | ColumndellNetIfTransSerialNumber | read-only | current | TransceiverData - SerialNumber |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.8 | ColumndellNetIfTransTransmitPowerLane1 | read-only | current | TransceiverData - Transmit Power in Lane 1 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.9 | ColumndellNetIfTransTransmitPowerLane2 | read-only | current | TransceiverData - Transmit Power in Lane 2 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.10 | ColumndellNetIfTransTransmitPowerLane3 | read-only | current | TransceiverData - Transmit Power in Lane 3 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.11 | ColumndellNetIfTransTransmitPowerLane4 | read-only | current | TransceiverData - Transmit Power in Lane 4 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.12 | ColumndellNetIfTransReceivePowerLane1 | read-only | current | TransceiverData - Receive Power in Lane 1 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.13 | ColumndellNetIfTransReceivePowerLane2 | read-only | current | TransceiverData - Receive Power in Lane 2 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.14 | ColumndellNetIfTransReceivePowerLane3 | read-only | current | TransceiverData - Receive Power in Lane 3 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.15 | ColumndellNetIfTransReceivePowerLane4 | read-only | current | TransceiverData - Receive Power in Lane 4 in unit dBm. For optics supporting power, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.16 | ColumndellNetIfTransTemperature | read-only | current | TransceiverData - Temperature in unit degree Celsius. For optics supporting temperature, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.17 | ColumndellNetIfTransVoltage | read-only | current | TransceiverData - Voltage in unit volts. For optics supporting voltage, valid float value will be displayed or 'null string' will be displayed. |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.18 | ColumndellNetIfTransTransmitBiasCurrentLane1 | read-only | current | TransceiverData - Transmit Bias Current in Lane 1 in unit mA. For optics supporting current, valid float value will be displayed or 'null string' will be displ… |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.19 | ColumndellNetIfTransTransmitBiasCurrentLane2 | read-only | current | TransceiverData - Transmit Bias Current in Lane 2 in unit mA. For optics supporting current, valid float value will be displayed or 'null string' will be displ… |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.20 | ColumndellNetIfTransTransmitBiasCurrentLane3 | read-only | current | TransceiverData - Transmit Bias Current in Lane 3 in unit mA. For optics supporting current, valid float value will be displayed or 'null string' will be displ… |
| 1.3.6.1.4.1.6027.3.11.1.3.1.1.21 | ColumndellNetIfTransTransmitBiasCurrentLane4 | read-only | current | TransceiverData - Transmit Bias Current in Lane 4 in unit mA. For optics supporting current, valid float value will be displayed or 'null string' will be displ… |
| 1.3.6.1.4.1.6027.3.11.1.4 | NodedellNetIfAlarmObjects | |||
| 1.3.6.1.4.1.6027.3.11.1.4.1 | NodedellNetIfAlarmMibNotifications | |||
| 1.3.6.1.4.1.6027.3.11.1.4.1.1 | NotificationdellNetIfAlarmHighBer | current | The driver/agent generate this trap when the Bit error rate is high on an interface. | |
| 1.3.6.1.4.1.6027.3.11.1.4.1.2 | NotificationdellNetIfAlarmHighBerClr | current | The driver/agent generate this trap when the high Bit error rate alarm on an interface is cleared. | |
| 1.3.6.1.4.1.6027.3.11.1.4.1.3 | NotificationdellNetIfAlarmFastRetrain | current | The driver/agent generate this trap when the retrain event is observed on an interface. | |
| 1.3.6.1.4.1.6027.3.11.2 | NodedellNetIfExtensionMibConformance | |||
| 1.3.6.1.4.1.6027.3.11.2.1 | NodedellNetIfExtensionMibCompliances | |||
| 1.3.6.1.4.1.6027.3.11.2.1.1 | CompliancedellNetIfExtensionMibCompliance | current | The compliance statement for Dell Networking OS IF Extension MIB. | |
| 1.3.6.1.4.1.6027.3.11.2.2 | NodedellNetIfExtensionMibGroups | |||
| 1.3.6.1.4.1.6027.3.11.2.2.1 | GroupdellNetIfParamsGroup | current | A collection of objects providing the Dell Networking OS IF Extenstion parameters. | |
| 1.3.6.1.4.1.6027.3.11.2.2.2 | GroupdellNetIfStatsGroup | current | A collection of objects providing the interface statistics. | |
| 1.3.6.1.4.1.6027.3.11.2.2.3 | GroupdellNetIfTransceiverDataGroup | current | A collection of objects providing the Dell Networking OS Transceiver Data. | |
| 1.3.6.1.4.1.6027.3.11.2.2.4 | GroupdellNetIfNotificationGroup | current | Notifications for Dell Networking OS Interface mib |