DELL-SNMP-UPS-MIB
179 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674 | Nodedell | |||
| 1.3.6.1.4.1.674.10902 | Nodeupsdell | |||
| 1.3.6.1.4.1.674.10902.2 | Nodehardware | |||
| 1.3.6.1.4.1.674.10902.2.100 | NodeproductID | |||
| 1.3.6.1.4.1.674.10902.2.100.1 | ScalarproductIDDisplayName | read-only | mandatory | Name of this product for display purposes. |
| 1.3.6.1.4.1.674.10902.2.100.2 | ScalarproductIDDescription | read-only | mandatory | A short description of this product. |
| 1.3.6.1.4.1.674.10902.2.100.3 | ScalarproductIDVendor | read-only | mandatory | The name of the product manufacturer. |
| 1.3.6.1.4.1.674.10902.2.100.4 | ScalarproductIDVersion | read-only | mandatory | The version of this product. |
| 1.3.6.1.4.1.674.10902.2.100.5 | ScalarproductIDBuildNumber | read-only | mandatory | The software build number of the product populating the MIB. |
| 1.3.6.1.4.1.674.10902.2.100.6 | ScalarproductIDURL | read-only | mandatory | The URL of the web-based application to manage this device, should the device provide one. |
| 1.3.6.1.4.1.674.10902.2.100.7 | ScalarproductIDDeviceNetworkName | read-only | mandatory | Operating system specific computer name if product SNMP service is hosted. |
| 1.3.6.1.4.1.674.10902.2.110 | NodeproductStatus | |||
| 1.3.6.1.4.1.674.10902.2.110.1 | ScalarproductStatusGlobalStatus | read-only | mandatory | Current status of the product. This is a rollup for the entire product including any monitored devices. The status is intended to give initiative to an SNMP mo… |
| 1.3.6.1.4.1.674.10902.2.110.2 | ScalarproductStatusLastGlobalStatus | read-only | mandatory | The status before the current status which induced an initiative to issue a global status change trap. |
| 1.3.6.1.4.1.674.10902.2.110.3 | ScalarproductStatusTimeStamp | read-only | mandatory | The last time that the SNMP table geometries changed and/or attribute data was significantly updated. This is to be used by management applications to trigger … |
| 1.3.6.1.4.1.674.10902.2.110.4 | ScalarproductStatusGetTimeOut | read-only | optional | Suggested time out value in milliseconds for how long the SNMP getter should wait while attempting to poll the product SNMP service. |
| 1.3.6.1.4.1.674.10902.2.110.5 | ScalarproductStatusRefreshRate | read-only | optional | Rate in seconds at which the SNMP service cached data is being updated. |
| 1.3.6.1.4.1.674.10902.2.110.6 | ScalarproductStatusGeneratingTrapFlag | read-only | optional | Indicates if this SNMP sub-agent is capable of and/or is generating SNMP Traps. This variable can take the following values: 1 True, this service is capable of… |
| 1.3.6.1.4.1.674.10902.2.120 | Nodephysical | |||
| 1.3.6.1.4.1.674.10902.2.120.1 | NodephysicalIdent | |||
| 1.3.6.1.4.1.674.10902.2.120.1.1 | ScalarphysicalIdentFamilyName | read-only | mandatory | UPS Family name. |
| 1.3.6.1.4.1.674.10902.2.120.1.2 | ScalarphysicalIdentSerialNumber | read-only | mandatory | UPS Serial number. |
| 1.3.6.1.4.1.674.10902.2.120.1.3 | ScalarphysicalIdentConverterType | read-only | mandatory | UPS type. |
| 1.3.6.1.4.1.674.10902.2.120.1.4 | ScalarphysicalIdentReferenceNumber | read-only | mandatory | Technical Reference of UPS firmware. |
| 1.3.6.1.4.1.674.10902.2.120.2 | NodephysicalOutput | |||
| 1.3.6.1.4.1.674.10902.2.120.2.1 | ScalarphysicalOutputInstantHeadroom | read-only | mandatory | This is the present amount of watt capacity remaining before overload. |
| 1.3.6.1.4.1.674.10902.2.120.2.2 | ScalarphysicalOutputPeakHeadroom | read-only | mandatory | Statistical value holding the lowest value that Instantaneous Headroom Watts was ever set too since the last time this statistic was reset. |
| 1.3.6.1.4.1.674.10902.2.120.2.3 | ScalarphysicalOutputPeakHeadroomTimestamp | read-only | mandatory | Time and date stamp of the last time the Peak Headroom Watts value was updated. |
| 1.3.6.1.4.1.674.10902.2.120.2.4 | ScalarphysicalOutputPeakConsumption | read-only | mandatory | Statistical value of the maximum RMS Watts the UPS has seen since the last time this statistic was reset. |
| 1.3.6.1.4.1.674.10902.2.120.2.5 | ScalarphysicalOutputPeakConsumptionTimestamp | read-only | mandatory | Time and date stamp of the last time the Peak Consumption Watts value was updated. |
| 1.3.6.1.4.1.674.10902.2.120.2.6 | ScalarphysicalOutputPresentConsumption | read-only | mandatory | Derived by averaging the watt second consumption over the past hour. Use an array of 60 words to store the average watt seconds consumed over the last minute t… |
| 1.3.6.1.4.1.674.10902.2.120.2.7 | ScalarphysicalOutputCumulativeConsumption | read-only | mandatory | 64 bit meter value that is derived by reading the Present KWH Consumption meter once per hour and adding it to the last value of this meter. Value accumulates … |
| 1.3.6.1.4.1.674.10902.2.120.2.8 | ScalarphysicalOutputCumulativeConsumptionTimestamp | read-only | mandatory | Time and date stamp of last time this meter value was reset. |
| 1.3.6.1.4.1.674.10902.2.120.2.9 | ScalarphysicalOutputVA | read-only | mandatory | Output VA. |
| 1.3.6.1.4.1.674.10902.2.120.3 | NodephysicalRectifier | |||
| 1.3.6.1.4.1.674.10902.2.120.3.1 | ScalarphysicalRectifierPosVoltage | read-only | mandatory | DC bus positive voltage. |
| 1.3.6.1.4.1.674.10902.2.120.3.2 | ScalarphysicalRectifierNegVoltage | read-only | mandatory | DC bus negative voltage. |
| 1.3.6.1.4.1.674.10902.2.120.4 | NodephysicalUPS | |||
| 1.3.6.1.4.1.674.10902.2.120.4.1 | ScalarphysicalUPSDateTime | read-only | mandatory | Real Time Clock with Date and Time. |
| 1.3.6.1.4.1.674.10902.2.120.4.2 | ScalarphysicalUPSAlarmsStatus | read-only | mandatory | List of traps that are in active mode. This list is coded in ASCI format and each trap number is separated by a coma (ex: 1,5,23,77). Only odd traps are listed. |
| 1.3.6.1.4.1.674.10902.2.120.4.3 | ScalarphysicalUPSRuntimeToShutdown | read-only | mandatory | Number of seconds remaining until UPS will receive a ShutdownAfterDelay command. 2147483647 if no countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.4.4 | ScalarphysicalUPSOutpoutSwitchable | read-only | mandatory | Parameter to enable or not remote UPS commands coming from all communication ports. |
| 1.3.6.1.4.1.674.10902.2.120.5 | NodephysicalBattery | |||
| 1.3.6.1.4.1.674.10902.2.120.5.1 | ScalarphysicalBatteryABMStatus | read-only | mandatory | Advanced Battery Monitoring satus. |
| 1.3.6.1.4.1.674.10902.2.120.5.2 | ScalarphysicalBatteryTestStatus | read-only | mandatory | Battery test satus. |
| 1.3.6.1.4.1.674.10902.2.120.5.3 | ScalarphysicalBatterySecondsRemaining | read-only | mandatory | Battery remaining time calculated by the autonometer. |
| 1.3.6.1.4.1.674.10902.2.120.6 | NodephysicalLoadSegment | |||
| 1.3.6.1.4.1.674.10902.2.120.6.1 | ScalarphysicalLoadSegment1ShutdownAfterDelay | read-only | mandatory | Number of seconds remaining until load segment 1 will switch off. -1 if no shutdown countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.6.2 | ScalarphysicalLoadSegment1StartupAfterDelay | read-only | mandatory | Number of seconds remaining until load segment 1 will switch on. -1 if no startup countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.6.3 | ScalarphysicalLoadSegment2ShutdownAfterDelay | read-only | mandatory | Number of seconds remaining until load segment 2 will switch off. -1 if no shutdown countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.6.4 | ScalarphysicalLoadSegment2StartupAfterDelay | read-only | mandatory | Number of seconds remaining until load segment 2 will switch on. -1 if no startup countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.6.5 | ScalarphysicalLoadSegment1RuntimeToShutdown | read-only | mandatory | Number of seconds remaining until load segment 1 will receive a ShutdownAfterDelay command. 2147483647 if no countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.6.6 | ScalarphysicalLoadSegment2RuntimeToShutdown | read-only | mandatory | Number of seconds remaining until load segment 2 will receive a ShutdownAfterDelay command. 2147483647 if no countdown is in effect. |
| 1.3.6.1.4.1.674.10902.2.120.7 | NodephysicalEnvironment | |||
| 1.3.6.1.4.1.674.10902.2.120.7.1 | ScalarphysicalEnvironmentSensorPresent | read-only | mandatory | Informations, if there is Environment Measurement Probe connected. |
| 1.3.6.1.4.1.674.10902.2.120.7.2 | ScalarphysicalEnvironmentSensorName | read-only | mandatory | User name of EMP. |
| 1.3.6.1.4.1.674.10902.2.120.7.3 | NodephysicalEnvironmentValues | |||
| 1.3.6.1.4.1.674.10902.2.120.7.3.1 | ScalarphysicalEnvironmentValuesTemperatureUnit | read-only | mandatory | Temperature unit setting. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.2 | ScalarphysicalEnvironmentValuesTemperature | read-only | mandatory | Current temperature value in 0.1 degree Celsius. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.3 | ScalarphysicalEnvironmentValuesHumidity | read-only | mandatory | Current humidity value in 0.1 percents. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.4 | ScalarphysicalEnvironmentValuesTemperatureLow | read-only | mandatory | Temperature low threshhold in units of degree Celsius. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.5 | ScalarphysicalEnvironmentValuesTemperatureHigh | read-only | mandatory | Temperature high threshhold in units of degree Celsius. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.6 | ScalarphysicalEnvironmentValuesTemperatureHysteresis | read-only | mandatory | Temperature hysteresis in units of degree Celsius. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.7 | ScalarphysicalEnvironmentValueshHumidityLow | read-only | mandatory | Humidity low threshhold in percents. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.8 | ScalarphysicalEnvironmentValuesHumidityHigh | read-only | mandatory | Humidity high threshhold in percents. |
| 1.3.6.1.4.1.674.10902.2.120.7.3.9 | ScalarphysicalEnvironmentValuesHumidityHysteresis | read-only | mandatory | Humidity hysteresis in percents. |
| 1.3.6.1.4.1.674.10902.2.120.7.4 | TablephysicalEnvironmentInputTable | not-accessible | mandatory | The table containins dry contact inputs information. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1 | RowphysicalEnvironmentInputEntry | not-accessible | mandatory | The description of an entry in the table. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1.1 | ColumnphysicalEnvironmentInputIndex | read-only | mandatory | The input index, ranging from 1 to 2. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1.2 | ColumnphysicalEnvironmentInputName | read-only | mandatory | The input user-friendly name. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1.3 | ColumnphysicalEnvironmentInputState | read-only | mandatory | Current state of input. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1.4 | ColumnphysicalEnvironmentInputOpenedState | read-only | mandatory | The input opened state user-friendly name. |
| 1.3.6.1.4.1.674.10902.2.120.7.4.1.5 | ColumnphysicalEnvironmentInputClosedState | read-only | mandatory | The input closed state user-friendly name. |
| 1.3.6.1.4.1.674.10902.2.130 | Nodelogical | |||
| 1.3.6.1.4.1.674.10902.2.140 | Nodetraps | |||
| 1.3.6.1.4.1.674.10902.2.140.1 | NodetrapInverterOverVoltage | Inverter AC over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.2 | NodetrapInverterOverVoltageOk | Inverter AC over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.3 | NodetrapInverterUnderVoltage | Inverter AC under voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.4 | NodetrapInverterUnderVoltageOk | Inverter AC under voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.5 | NodetrapBypassFrequencyOutOfRange | Bypass under or over frequency. | ||
| 1.3.6.1.4.1.674.10902.2.140.6 | NodetrapBypassFrequencyOutOfRangeOk | Bypass under or over frequency ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.7 | NodetrapOnBuck | On Buck / Input Voltage Reducer. | ||
| 1.3.6.1.4.1.674.10902.2.140.8 | NodetrapReturnFromBuck | Return from Buck. | ||
| 1.3.6.1.4.1.674.10902.2.140.9 | NodetrapOnBoost | On Boost / Input Voltage Booster. | ||
| 1.3.6.1.4.1.674.10902.2.140.10 | NodetrapReturnFromBoost | Return from Boost. | ||
| 1.3.6.1.4.1.674.10902.2.140.11 | NodetrapInputOverVoltage | Input AC over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.12 | NodetrapInputOverVoltageOk | Input AC over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.13 | NodetrapInputUnderVoltage | Input AC under voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.14 | NodetrapInputUnderVoltageOk | Input AC under voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.15 | NodetrapInputFrequencyOutOfRange | Input under or over frequency. | ||
| 1.3.6.1.4.1.674.10902.2.140.16 | NodetrapInputFrequencyOutOfRangeOk | Input under or over frequency ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.17 | NodetrapRemoteEmergencyPowerOff | Remote emergency power off. | ||
| 1.3.6.1.4.1.674.10902.2.140.18 | NodetrapReturnFromEmergencyPowerOff | Return from remote emergency power off. | ||
| 1.3.6.1.4.1.674.10902.2.140.19 | NodetrapLevel1Overload | Output Level 1 overload. | ||
| 1.3.6.1.4.1.674.10902.2.140.20 | NodetrapLevel1OverloadOk | Output Level 1 overload ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.21 | NodetrapLevel2Overload | Level 2 overload. | ||
| 1.3.6.1.4.1.674.10902.2.140.22 | NodetrapLevel2OverloadOk | Level 2 overload ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.23 | NodetrapLevel3Overload | Level 3 overload. | ||
| 1.3.6.1.4.1.674.10902.2.140.24 | NodetrapLevel3OverloadOk | Level 3 overload ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.25 | NodetrapPosDCLinkOverVoltage | Positive DC link over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.26 | NodetrapPosDCLinkOverVoltageOk | Positive DC link over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.27 | NodetrapPosDCLinkUnderVoltage | Positive DC link under voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.28 | NodetrapPosDCLinkUnderVoltageOk | Positive DC link under voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.29 | NodetrapNegDCLinkOverVoltage | Negative DC link over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.30 | NodetrapNegDCLinkOverVoltageOk | Negative DC link over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.31 | NodetrapNegDCLinkUnderVoltage | Negative DC link under voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.32 | NodetrapNegDCLinkUnderVoltageOk | Negative DC link under voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.33 | NodetrapRectifierFault | Rectifier fault. | ||
| 1.3.6.1.4.1.674.10902.2.140.34 | NodetrapRectifierOk | Rectifier ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.35 | NodetrapInverterFault | Inverter fault. | ||
| 1.3.6.1.4.1.674.10902.2.140.36 | NodetrapInverterOk | Inverter ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.37 | NodetrapChargerFailure | Charger failure. | ||
| 1.3.6.1.4.1.674.10902.2.140.38 | NodetrapChargerOk | Charger ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.39 | NodetrapEepromFailure | EEPROM failure. | ||
| 1.3.6.1.4.1.674.10902.2.140.40 | NodetrapEepromOk | EEPROM off. | ||
| 1.3.6.1.4.1.674.10902.2.140.41 | NodetrapShutdownImminent | Shutdown imminent. | ||
| 1.3.6.1.4.1.674.10902.2.140.42 | NodetrapShutdownImminentOver | Shutdown imminent over. | ||
| 1.3.6.1.4.1.674.10902.2.140.43 | NodetrapBatteryLow | Battery low. | ||
| 1.3.6.1.4.1.674.10902.2.140.44 | NodetrapBatteryOk | Battery ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.45 | NodetrapOutputShortCircuit | Output short circuit. | ||
| 1.3.6.1.4.1.674.10902.2.140.46 | NodetrapOutputReturnFromShortCircuit | Output return from short circuit. | ||
| 1.3.6.1.4.1.674.10902.2.140.47 | NodetrapUtilityNotPresent | Utility not present. | ||
| 1.3.6.1.4.1.674.10902.2.140.48 | NodetrapUtilityPresent | Utility present. | ||
| 1.3.6.1.4.1.674.10902.2.140.49 | NodetrapBatteryOverVoltage | Battery DC over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.50 | NodetrapBatteryOverVoltageOk | Battery DC over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.51 | NodetrapHeatsinkOvertemperature | Heatsink overtemperature. | ||
| 1.3.6.1.4.1.674.10902.2.140.52 | NodetrapHeatsinkOvertemperatureOk | Heatsink overtemperature ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.53 | NodetrapBypassNotAvailable | Bypass not available. | ||
| 1.3.6.1.4.1.674.10902.2.140.54 | NodetrapBypassNotAvailableOk | Bypass not available ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.55 | NodetrapOnManualBypass | On manual/ maintenance bypass. | ||
| 1.3.6.1.4.1.674.10902.2.140.57 | NodetrapUPSOnBattery | UPS on battery. | ||
| 1.3.6.1.4.1.674.10902.2.140.58 | NodetrapUPSReturnFromBattery | UPS return from battery. | ||
| 1.3.6.1.4.1.674.10902.2.140.59 | NodetrapUPSOnBypass | UPS on bypass. | ||
| 1.3.6.1.4.1.674.10902.2.140.60 | NodetrapUPSReturnFromBypass | UPS return from bypass. | ||
| 1.3.6.1.4.1.674.10902.2.140.61 | NodetrapBatteryTestInProgress | Battery manual or automatic test in progress. | ||
| 1.3.6.1.4.1.674.10902.2.140.62 | NodetrapBatteryTestDone | Battery test done. | ||
| 1.3.6.1.4.1.674.10902.2.140.63 | NodetrapBatteryNeedReplacement | Battery test failed, battery needs to be replaced. | ||
| 1.3.6.1.4.1.674.10902.2.140.64 | NodetrapBatteryReplacementDone | Battery replacement done. | ||
| 1.3.6.1.4.1.674.10902.2.140.65 | NodetrapFanFailure | Fan failure. | ||
| 1.3.6.1.4.1.674.10902.2.140.66 | NodetrapFanOk | Fan ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.67 | NodetrapSiteWiringFault | Site wiring fault. | ||
| 1.3.6.1.4.1.674.10902.2.140.68 | NodetrapSiteWiringOk | Site wiring ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.69 | NodetrapBatteryDisconnected | Batteries disconnected. | ||
| 1.3.6.1.4.1.674.10902.2.140.70 | NodetrapBatteryConnected | Batteries connected. | ||
| 1.3.6.1.4.1.674.10902.2.140.71 | NodetrapUPSOff | UPS off. | ||
| 1.3.6.1.4.1.674.10902.2.140.72 | NodetrapUPSOn | UPS on. | ||
| 1.3.6.1.4.1.674.10902.2.140.73 | NodetrapDCLinkImbalance | DC link imbalance. | ||
| 1.3.6.1.4.1.674.10902.2.140.74 | NodetrapDCLinkImbalanceOk | DC link imbalance ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.79 | NodetrapABMOn | ABM state on. | ||
| 1.3.6.1.4.1.674.10902.2.140.80 | NodetrapABMOff | ABM state off. | ||
| 1.3.6.1.4.1.674.10902.2.140.81 | NodetrapLoadSegment1Off | Load segment 1 off. | ||
| 1.3.6.1.4.1.674.10902.2.140.82 | NodetrapLoadSegment1On | Load segment 1 on. | ||
| 1.3.6.1.4.1.674.10902.2.140.83 | NodetrapLoadSegment2Off | Load segment 2 off. | ||
| 1.3.6.1.4.1.674.10902.2.140.84 | NodetrapLoadSegment2On | Load segment 2 on. | ||
| 1.3.6.1.4.1.674.10902.2.140.85 | NodetrapInHighEfficiencyMode | In High Efficiency mode. | ||
| 1.3.6.1.4.1.674.10902.2.140.86 | NodetrapReturnFromHighEfficiencyMode | Return from High Efficiency mode. | ||
| 1.3.6.1.4.1.674.10902.2.140.87 | NodetrapRectifierOverload | Rectifier input over current. | ||
| 1.3.6.1.4.1.674.10902.2.140.88 | NodetrapRectifierOverloadOk | Rectifier current ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.89 | NodetrapInverterOverload | Inverter output over current. | ||
| 1.3.6.1.4.1.674.10902.2.140.90 | NodetrapInverterOverloadOk | Inverter output current ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.91 | NodetrapBypassVoltageOutOfRange | Bypass AC under or over voltage. | ||
| 1.3.6.1.4.1.674.10902.2.140.92 | NodetrapBypassVoltageOutOfRangeOk | Bypass AC under or over voltage ok. | ||
| 1.3.6.1.4.1.674.10902.2.140.93 | NodetrapServiceBattery | Service battery. | ||
| 1.3.6.1.4.1.674.10902.2.140.94 | NodetrapToBypassCommand | UPS received command to switch on bypass. | ||
| 1.3.6.1.4.1.674.10902.2.140.95 | NodetrapFromBypassCommand | UPS received command to switch on inverter. | ||
| 1.3.6.1.4.1.674.10902.2.140.96 | NodetrapCommunicationLost | Lost communication with UPS, HID databasis is not updated. | ||
| 1.3.6.1.4.1.674.10902.2.140.97 | NodetrapCommunicationRestored | Communication restored with UPS, HID databasis is updated. | ||
| 1.3.6.1.4.1.674.10902.2.140.98 | NodetrapEnvironComFailure | Environment Probe communication failure. | ||
| 1.3.6.1.4.1.674.10902.2.140.99 | NodetrapEnvironComOK | Environment Probe communication restored. | ||
| 1.3.6.1.4.1.674.10902.2.140.100 | NodetrapEnvironTemperatureLow | Temperature is below low threshold. | ||
| 1.3.6.1.4.1.674.10902.2.140.102 | NodetrapEnvironTemperatureHigh | Temperature is above high threshold. | ||
| 1.3.6.1.4.1.674.10902.2.140.103 | NodetrapEnvironTemperatureOK | Temperature is in normal range. | ||
| 1.3.6.1.4.1.674.10902.2.140.104 | NodetrapEnvironHumidityLow | Humidity is below low threshold. | ||
| 1.3.6.1.4.1.674.10902.2.140.106 | NodetrapEnvironHumidityHigh | Humidity is above high threshold. | ||
| 1.3.6.1.4.1.674.10902.2.140.107 | NodetrapEnvironHumidityOK | Humidity is in normal range. | ||
| 1.3.6.1.4.1.674.10902.2.140.108 | NodetrapEnvironInput1Closed | Input #1 is Closed. | ||
| 1.3.6.1.4.1.674.10902.2.140.109 | NodetrapEnvironInput1Open | Input #1 is Open. | ||
| 1.3.6.1.4.1.674.10902.2.140.110 | NodetrapEnvironInput2Closed | Input #2 is Closed. | ||
| 1.3.6.1.4.1.674.10902.2.140.111 | NodetrapEnvironInput2Open | Input #2 is Open. |