DES-1526-MIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString mib-2 PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171 | Noded-link | |||
| 1.3.6.1.4.1.171.10 | Nodedlink-products | |||
| 1.3.6.1.4.1.171.10.60 | Nodedlink-DES1526SeriesProd | |||
| 1.3.6.1.4.1.171.10.60.1 | NodeDES-1526 | |||
| 1.3.6.1.4.1.171.10.60.1.1 | NodecompanyCommGroup | |||
| 1.3.6.1.4.1.171.10.60.1.1 | NodeswFiberInsert | Fiber insert trap | ||
| 1.3.6.1.4.1.171.10.60.1.1.1 | TablecommSetTable | not-accessible | mandatory | A list of SNMP Set Community Entries |
| 1.3.6.1.4.1.171.10.60.1.1.1.1 | RowcommSetEntry | not-accessible | mandatory | A list of SNMP Set Community properties |
| 1.3.6.1.4.1.171.10.60.1.1.1.1.1 | ColumncommSetIndex | read-only | mandatory | An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. |
| 1.3.6.1.4.1.171.10.60.1.1.1.1.2 | ColumncommSetName | read-write | mandatory | The name of this SNMP Set Community Entry. |
| 1.3.6.1.4.1.171.10.60.1.1.1.1.3 | ColumncommSetStatus | read-write | mandatory | The RowStatus for the Set Community entry. |
| 1.3.6.1.4.1.171.10.60.1.1.2 | TablecommGetTable | not-accessible | mandatory | A list of SNMP Get Community Entries |
| 1.3.6.1.4.1.171.10.60.1.1.2.1 | RowcommGetEntry | not-accessible | mandatory | A list of SNMP Get Community properties |
| 1.3.6.1.4.1.171.10.60.1.1.2.1.1 | ColumncommGetIndex | read-only | mandatory | An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. |
| 1.3.6.1.4.1.171.10.60.1.1.2.1.2 | ColumncommGetName | read-write | mandatory | The name of this SNMP Get Community Entry. |
| 1.3.6.1.4.1.171.10.60.1.1.2.1.3 | ColumncommGetStatus | read-write | mandatory | The RowStatus for the Get Community entry. |
| 1.3.6.1.4.1.171.10.60.1.1.3 | TablecommTrapTable | not-accessible | mandatory | A list of SNMP Trap Community Entries |
| 1.3.6.1.4.1.171.10.60.1.1.3.1 | RowcommTrapEntry | not-accessible | mandatory | A list of SNMP Trap Community properties |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.1 | ColumncommTrapIndex | read-only | mandatory | An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.2 | ColumncommTrapName | read-write | mandatory | The name of this SNMP Trap Community Entry. |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.3 | ColumncommTrapIpAddress | read-write | mandatory | The IP Address of this SNMP Trap Community Entry. |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.4 | ColumncommTrapVlanId | read-write | mandatory | The Trap VLAN identifier of this SNMP Trap Community Entry. The value must be from 1 to 4094. |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.5 | ColumncommTrapSNMPBootup | read-write | mandatory | Bootup trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.6 | ColumncommTrapSNMPTPLinkUpDown | read-write | mandatory | Twisted Pair link up / link down trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.7 | ColumncommTrapSNMPFiberLinkUpDown | read-write | mandatory | Fiber link up / link down trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.9 | ColumncommTrapTrapAbnormalTPRXError | read-write | mandatory | Twisted Pair abnormal receive error trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.10 | ColumncommTrapTrapAbnormalTPTXError | read-write | mandatory | Twisted Pair abnormal transmit error trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.11 | ColumncommTrapTrapAbnormalFiberRXError | read-write | mandatory | Fiber abnormal receive error trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.12 | ColumncommTrapTrapAbnormalFiberTXError | read-write | mandatory | Fiber abnormal transmit error trap |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.13 | ColumncommTrapTrapPOEPowerFail | read-write | mandatory | PoE POWER Fail |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.14 | ColumncommTrapTrapPOEPortOvercurrent | read-write | mandatory | PoE port Overcurrent |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.15 | ColumncommTrapTrapPOEPortShort | read-write | mandatory | PoE port Shortcircuit |
| 1.3.6.1.4.1.171.10.60.1.1.3.1.16 | ColumncommTrapStatus | read-write | mandatory | The RowStatus for the Trap Community entry. |
| 1.3.6.1.4.1.171.10.60.1.2 | NodeswFiberRemove | Fiber remove trap | ||
| 1.3.6.1.4.1.171.10.60.1.3 | NodecompanyMiscGroup | |||
| 1.3.6.1.4.1.171.10.60.1.3 | NodeswFiberAbnormalRXError | Fiber abnormal rx error trap | ||
| 1.3.6.1.4.1.171.10.60.1.3.3 | ScalarmiscStatisticsReset | read-write | mandatory | Resets the units statistics. A (1) resets the unit, a (2) does nothing. |
| 1.3.6.1.4.1.171.10.60.1.4 | NodeswFiberAbnormalTXError | Fiber abnormal tx error trap | ||
| 1.3.6.1.4.1.171.10.60.1.5 | NodeswTPAbnormalRXError | Twisted Pair abnormal rx error trap | ||
| 1.3.6.1.4.1.171.10.60.1.6 | NodeswTPAbnormalTXError | Twisted Pair abnormal tx error trap | ||
| 1.3.6.1.4.1.171.10.60.1.11 | NodecompanyConfigGroup | |||
| 1.3.6.1.4.1.171.10.60.1.11.1 | ScalarconfigVerSwPrimary | read-only | mandatory | The software image version string |
| 1.3.6.1.4.1.171.10.60.1.11.2 | ScalarconfigVerHwChipSet | read-only | mandatory | The hardware chipset version string |
| 1.3.6.1.4.1.171.10.60.1.11.6 | TableconfigPortTable | not-accessible | mandatory | A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assu… |
| 1.3.6.1.4.1.171.10.60.1.11.6.1 | RowconfigPortEntry | not-accessible | mandatory | An enterprise specific interface entry. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.1 | ColumnconfigPort | read-only | mandatory | A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.2 | ColumnconfigPortSpeed | read-write | mandatory | The port's speed desired state. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.3 | ColumnconfigPortOperStatus | read-only | mandatory | The port's operating speed state. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.4 | ColumnconfigPortFlowControl | read-write | mandatory | The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.5 | ColumnconfigPortFlowControlOper | read-only | mandatory | The port's operating flow control state. |
| 1.3.6.1.4.1.171.10.60.1.11.6.1.6 | ColumnconfigPortPriority | read-write | mandatory | The port's current priority. |
| 1.3.6.1.4.1.171.10.60.1.11.8 | TableconfigMirrorTable | not-accessible | mandatory | A list of the Mirror |
| 1.3.6.1.4.1.171.10.60.1.11.8.1 | RowconfigMirrorEntry | not-accessible | mandatory | A Mirror entry containing the Mirror id and mode |
| 1.3.6.1.4.1.171.10.60.1.11.8.1.1 | ColumnconfigMirrorId | read-only | mandatory | An index that uniquely identifies an entry in the Mirror Table. One entries are currently supported. |
| 1.3.6.1.4.1.171.10.60.1.11.8.1.2 | ColumnconfigMirrorMode | read-write | mandatory | When deciding the mirroring source port, then Mirror mode will be available. |
| 1.3.6.1.4.1.171.10.60.1.11.8.1.3 | ColumnconfigMirrorMon | read-write | mandatory | When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to if… |
| 1.3.6.1.4.1.171.10.60.1.11.8.1.4 | ColumnconfigMirrorSrc | read-write | mandatory | When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring source port. This value has a valid range of 1 to ifNumb… |
| 1.3.6.1.4.1.171.10.60.1.11.8.1.5 | ColumnconfigMirrorStatus | read-write | mandatory | The RowStatus for the Mirror entry. |
| 1.3.6.1.4.1.171.10.60.1.11.9 | ScalarconfigSNMPEnable | read-write | mandatory | Enable/Disable SNMP function. A (1) enables, a (2) disables. |
| 1.3.6.1.4.1.171.10.60.1.11.12 | ScalarconfigIpAssignmentMode | read-write | mandatory | Indicates whether the device address is assigned by the user (manual), or DHCP, or Others(BootP). |
| 1.3.6.1.4.1.171.10.60.1.11.13 | ScalarconfigPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station. |
| 1.3.6.1.4.1.171.10.60.1.11.15 | ScalarconfigPasswordAdmin | write-only | mandatory | The adminstrator password |
| 1.3.6.1.4.1.171.10.60.1.11.16 | ScalarconfigIpAddress | read-write | mandatory | The IP Address for the RDU box. |
| 1.3.6.1.4.1.171.10.60.1.11.17 | ScalarconfigNetMask | read-write | mandatory | The network mask for the RDU box. |
| 1.3.6.1.4.1.171.10.60.1.11.18 | ScalarconfigGateway | read-write | mandatory | The Gatway Address for the unit. |
| 1.3.6.1.4.1.171.10.60.1.11.19 | ScalarconfigSave | read-write | mandatory | Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing. |
| 1.3.6.1.4.1.171.10.60.1.11.22 | ScalarconfigRestoreDefaults | read-write | mandatory | Restores the configuration of the unit to the original settings. |
| 1.3.6.1.4.1.171.10.60.1.13 | NodecompanyTVlanGroup | |||
| 1.3.6.1.4.1.171.10.60.1.13.1 | TabletvlanTable | not-accessible | mandatory | A list of the VLANs |
| 1.3.6.1.4.1.171.10.60.1.13.1.1 | RowtvlanEntry | not-accessible | mandatory | A VLAN entry containing the VLAN id and name. |
| 1.3.6.1.4.1.171.10.60.1.13.1.1.1 | ColumntvlanId | read-only | mandatory | The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094. |
| 1.3.6.1.4.1.171.10.60.1.13.1.1.3 | ColumntvlanMember | read-write | mandatory | The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet s… |
| 1.3.6.1.4.1.171.10.60.1.13.1.1.4 | ColumntvlanUntaggedPorts | read-write | mandatory | If that bit has a value of '1' the outgoing frame on the egress port is untagged. If that bit has a value of '0' the outgoing frame on the egress port is tagge… |
| 1.3.6.1.4.1.171.10.60.1.13.1.1.5 | ColumntvlanStatus | read-write | mandatory | The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| 1.3.6.1.4.1.171.10.60.1.13.2 | TabletvlanPortTable | not-accessible | mandatory | A list of ports and their associated VLAN. |
| 1.3.6.1.4.1.171.10.60.1.13.2.1 | RowtvlanPortEntry | not-accessible | mandatory | Information pertaining to an individual port regarding to which VLAN it belongs. |
| 1.3.6.1.4.1.171.10.60.1.13.2.1.1 | ColumntvlanPortPortId | read-only | mandatory | A port identifier that is in the range of 1 to ifNumber. |
| 1.3.6.1.4.1.171.10.60.1.13.2.1.2 | ColumntvlanPortVlanId | read-write | mandatory | The default VLAN identifier. |
| 1.3.6.1.4.1.171.10.60.1.14 | NodecompanyPortTrunkGroup | |||
| 1.3.6.1.4.1.171.10.60.1.14.1 | TableportTrunkTable | not-accessible | mandatory | A list of port trunks and their associated members. |
| 1.3.6.1.4.1.171.10.60.1.14.1.1 | RowportTrunkEntry | not-accessible | mandatory | A port trunk entry containing the trunk id and trunk members. |
| 1.3.6.1.4.1.171.10.60.1.14.1.1.1 | ColumnportTrunkId | read-only | mandatory | The port trunk identifier. The current range is from 1 to 4. |
| 1.3.6.1.4.1.171.10.60.1.14.1.1.2 | ColumnportTrunkMember | read-only | mandatory | Trunk group 1 - 3 has eight members (Port 01/09/17 - 08/16/24). Trunk group 4 has two members (Port 25-26). Each octet within this value specifies a set of eig… |
| 1.3.6.1.4.1.171.10.60.1.14.1.1.3 | ColumnportTrunkMemberValue | read-write | mandatory | A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no p… |
| 1.3.6.1.4.1.171.10.60.1.14.1.1.4 | ColumnportTrunkEnable | read-write | mandatory | Enable/Disable Trunk group. A (1) enables, a (2) disables. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING (SIZE (6)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | current |