DES3216-MIB
117 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171 | Nodedlink | |||
| 1.3.6.1.4.1.171.1 | NodelinkChangeEvent | The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up | ||
| 1.3.6.1.4.1.171.2 | NodeportPartition | The trap is sent whenever the port state enter the Partion mode when more than 32 collisions occur while trasmitting. | ||
| 1.3.6.1.4.1.171.10 | Nodedlink-products | |||
| 1.3.6.1.4.1.171.10.9 | Nodedlink-Des3216Prod | |||
| 1.3.6.1.4.1.171.10.9.1 | Nodedlink-Des3216ProdId | |||
| 1.3.6.1.4.1.171.10.9.2 | Nodedes3216SwHub | |||
| 1.3.6.1.4.1.171.11 | Nodedlink-mgmt | |||
| 1.3.6.1.4.1.171.11.1 | NodeagentConfigInfo | |||
| 1.3.6.1.4.1.171.11.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.171.11.1.1.1 | ScalaragentRuntimeSwVersion | read-only | mandatory | This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion woul… |
| 1.3.6.1.4.1.171.11.1.1.2 | ScalaragentPromFwVersion | read-only | mandatory | This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion woul… |
| 1.3.6.1.4.1.171.11.1.1.3 | ScalaragentHwRevision | read-only | mandatory | This is a textual description of the hardware revision. The display string should look like 'Rev. A1' |
| 1.3.6.1.4.1.171.11.1.1.4 | ScalaragentMgmtProtocolCapability | read-only | mandatory | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.171.11.1.1.5 | TableagentMibCapabilityTable | not-accessible | mandatory | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.171.11.1.1.5.1 | RowagentMibCapabilityEntry | not-accessible | mandatory | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.11.1.1.5.1.1 | ColumnagentMibCapabilityIndex | read-only | mandatory | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.171.11.1.1.5.1.2 | ColumnagentMibCapabilityDescr | read-only | mandatory | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.171.11.1.1.5.1.3 | ColumnagentMibCapabilityVersion | read-only | mandatory | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.11.1.1.5.1.4 | ColumnagentMibCapabilityType | read-only | mandatory | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.11.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.171.11.1.2.1 | ScalaragentSwUpdateMode | read-write | mandatory | The download media used by the system to download the runtime software. |
| 1.3.6.1.4.1.171.11.1.2.2 | ScalaragentSwUpdateCtrl | read-write | mandatory | Current status of software download control. The setting is effective the next time you reset or power on the hub. |
| 1.3.6.1.4.1.171.11.1.2.3 | ScalaragentBootFile | read-write | mandatory | The name of the file to be downloaded from the TFTP server when software update is enabled. |
| 1.3.6.1.4.1.171.11.1.2.4 | ScalaragentSystemReset | read-write | mandatory | This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The… |
| 1.3.6.1.4.1.171.11.1.2.5 | ScalaragentRs232PortConfig | read-write | mandatory | The current setting of RS-232C port. The RS-232C port can be configured as the console port or used for out-of-band connection. |
| 1.3.6.1.4.1.171.11.1.2.6 | ScalaragentOutOfBandBaudRateConfig | read-write | mandatory | The baud rate setting for out of band connection. The baud rate for the console interface is always 9600. |
| 1.3.6.1.4.1.171.11.1.2.7 | ScalaragentOutOfBandDialNumber | read-write | mandatory | The dial out phone number for out of band to establish a connection. This entry is used for reference only. |
| 1.3.6.1.4.1.171.11.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.171.11.1.3.1 | ScalaragentIpNumOfIf | read-only | mandatory | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.171.11.1.3.2 | TableagentIpIfTable | not-accessible | mandatory | A list of IP interface entries supported by the agent. |
| 1.3.6.1.4.1.171.11.1.3.2.1 | RowagentIpIfEntry | not-accessible | mandatory | An agentIPIfEntry contains information about a particular IP interface. |
| 1.3.6.1.4.1.171.11.1.3.2.1.1 | ColumnagentIpIfIndex | read-only | mandatory | This object uniquely identifies the IP interface number in agentIpIfTable. This value should never greater than agentIpNumOfIf |
| 1.3.6.1.4.1.171.11.1.3.2.1.2 | ColumnagentIpIfAddress | read-write | mandatory | The IP address of the interface. |
| 1.3.6.1.4.1.171.11.1.3.2.1.3 | ColumnagentIpIfNetMask | read-write | mandatory | The IP net mask for this interface. |
| 1.3.6.1.4.1.171.11.1.3.2.1.4 | ColumnagentIpIfDefaultRouter | read-write | mandatory | The default gateway for this IP interface. |
| 1.3.6.1.4.1.171.11.1.3.2.1.5 | ColumnagentIpIfMacAddr | read-only | mandatory | The MAC address of this IP interface. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zer… |
| 1.3.6.1.4.1.171.11.1.3.2.1.6 | ColumnagentIpIfType | read-only | mandatory | The physical layer interface of the IP interface. |
| 1.3.6.1.4.1.171.11.1.3.3 | ScalaragentIpBootServerAddr | read-write | mandatory | The IP Address of Boot Server. |
| 1.3.6.1.4.1.171.11.1.3.4 | ScalaragentIpBootProtocol | read-write | mandatory | The software download protocol used for software update. |
| 1.3.6.1.4.1.171.11.1.3.5 | ScalaragentIpGetIpFromBootpServer | read-write | mandatory | This object indicates whether the agent get its system IP address from BootP server at start up. |
| 1.3.6.1.4.1.171.11.1.3.6 | ScalaragentIpUnauthAddr | read-only | mandatory | The IP address of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.171.11.1.3.7 | ScalaragentIpUnauthComm | read-only | mandatory | The community string of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.171.11.1.3.8 | ScalaragentIpLastBootServerAddr | read-only | mandatory | The last IP address used as Boot server IP address. |
| 1.3.6.1.4.1.171.11.1.3.9 | ScalaragentIpLastIpAddr | read-only | mandatory | The last IP address used as the agent system IP address. |
| 1.3.6.1.4.1.171.11.1.3.10 | TableagentIpTrapManagerTable | not-accessible | mandatory | A list of trap manager entries to which to send SNMP traps . |
| 1.3.6.1.4.1.171.11.1.3.10.1 | RowagentIpTrapManagerEntry | not-accessible | mandatory | This entry contains the particular trap manager settings. |
| 1.3.6.1.4.1.171.11.1.3.10.1.1 | ColumnagentIpTrapManagerIpAddr | read-only | mandatory | The IP address to receive SNMP traps from this device. |
| 1.3.6.1.4.1.171.11.1.3.10.1.2 | ColumnagentIpTrapManagerComm | read-write | mandatory | The community string of the SNMP trap packet sent to the trap manager. |
| 1.3.6.1.4.1.171.11.1.3.10.1.3 | ColumnagentIpTrapManagerStatus | read-write | mandatory | This object indicates whether or not the trap should be send to this trap manager. |
| 1.3.6.1.4.1.171.11.9 | Nodedes3216series | |||
| 1.3.6.1.4.1.171.11.9.1 | Nodedes3216MIB | |||
| 1.3.6.1.4.1.171.11.9.1.1 | NodeswDevicePackage | |||
| 1.3.6.1.4.1.171.11.9.1.1.1 | NodeswDeviceInfo | |||
| 1.3.6.1.4.1.171.11.9.1.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | mandatory | The number of ports within this switch hub. This value is the sum of the ports of each group within this switch hub. |
| 1.3.6.1.4.1.171.11.9.1.1.1.2 | ScalarswDevInfoNumOfPortOnUse | read-only | mandatory | The number of ports in this switch hub connected to the segment or end stations. |
| 1.3.6.1.4.1.171.11.9.1.1.1.3 | ScalarswDevInfoDesc | read-only | mandatory | A textual description of this switch hub. |
| 1.3.6.1.4.1.171.11.9.1.1.1.4 | ScalarswDevInfoPortType | read-only | mandatory | The connector type of this port. |
| 1.3.6.1.4.1.171.11.9.1.1.1.5 | ScalarswDevInfoHwRev | read-only | mandatory | A textual description of the hardware revision of this switch bub. |
| 1.3.6.1.4.1.171.11.9.1.1.1.6 | ScalarswDevInfoSystemUpTime | read-only | mandatory | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re- initialization, the… |
| 1.3.6.1.4.1.171.11.9.1.1.1.7 | ScalarswDevInfoFrontPanelLedStatus | read-only | mandatory | The current status of front panel LED. |
| 1.3.6.1.4.1.171.11.9.1.1.1.8 | ScalarswDevInfoDramSize | read-only | mandatory | The DRAM size of the switch hub |
| 1.3.6.1.4.1.171.11.9.1.1.1.9 | TableswDevInfoGroupTypeTable | not-accessible | mandatory | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.171.11.9.1.1.1.9.1 | RowswDevInfoGroupTypeEntry | not-accessible | mandatory | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.11.9.1.1.1.9.1.1 | ColumnswDevInfoGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.171.11.9.1.1.1.9.1.2 | ColumnswDevInfoGroupMediaType | read-only | mandatory | |
| 1.3.6.1.4.1.171.11.9.1.1.2 | NodeswDeviceCtl | |||
| 1.3.6.1.4.1.171.11.9.1.1.2.1 | ScalarswDevCtrlDisableLearningState | read-write | mandatory | This Object indicate the switch hub wether or not learn any new addresses from the Ethernet ports. |
| 1.3.6.1.4.1.171.11.9.1.1.2.2 | ScalarswDevCtrlReset | read-write | mandatory | This object indicates the switch hub reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The a… |
| 1.3.6.1.4.1.171.11.9.1.2 | NodeswPortPackage | |||
| 1.3.6.1.4.1.171.11.9.1.2.1 | TableswPortInfoTable | not-accessible | mandatory | A list of port information entries. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1 | RowswPortInfoEntry | not-accessible | mandatory | This entry contains the port information, like porttype, linkstatus... |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.1 | ColumnswPortInfoGroupIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains infomation. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.2 | ColumnswPortInfoIndex | read-only | mandatory | This object indicate switch hub port number. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.3 | ColumnswPortInfoType | read-only | mandatory | The connector type of this port. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.4 | ColumnswPortInfoPartitionStatus | read-only | mandatory | This Object indicate the port partition status. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.5 | ColumnswPortInfoLinkStatus | read-only | mandatory | This Object indicate the port link test status. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.6 | ColumnswPortInfoDuplexMode | read-only | mandatory | This Object indicate the port work in which duplex mode. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.7 | ColumnswPortInfoNegotiationStatus | read-only | mandatory | This Object indicate the port work in auto negotiation enabled or disabled. |
| 1.3.6.1.4.1.171.11.9.1.2.1.1.8 | ColumnswPortInfoSpeedStatus | read-only | mandatory | This Object indicate the port trasmit rate is in 10M bps or 100M bps . |
| 1.3.6.1.4.1.171.11.9.1.2.2 | TableswPortCtrlTable | not-accessible | mandatory | A list of port state control entries. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1 | RowswPortCtrlEntry | not-accessible | mandatory | This entry control the port state, like filter broadcast, linkstatus... |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.1 | ColumnswPortCtrlGroupIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains infomation. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.2 | ColumnswPortCtrlIndex | read-only | mandatory | This object indicate switch hub port number. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.3 | ColumnswPortCtrlAdminState | read-write | mandatory | Port control administration state. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.4 | ColumnswPortCtrlDuplexState | read-write | mandatory | Indicating the port work in half/full duplex mode. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.5 | ColumnswPortCtrlLinkStatusAlarmState | read-write | mandatory | Depending on this object to determine wether send a trap or not when link status change . |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.6 | ColumnswPortCtrlFilterBcastState | read-write | mandatory | Port control filter broadcast to all port or discard. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.7 | ColumnswPortCtrlForwardUnknowState | read-write | mandatory | Port control forward unknow packet state. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.8 | ColumnswPortCtrlPartitionStatus | read-write | mandatory | Depending on this object determine to send a trap or not when the port was partition. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.9 | ColumnswPortCtrlNegotiationStatus | read-write | mandatory | Depending on this object determine to enable NWAY or disable. |
| 1.3.6.1.4.1.171.11.9.1.2.2.1.10 | ColumnswPortCtrlSpeedStatus | read-write | mandatory | Depending on this object to determining this port transmit rate is 10M bps or 100M bps. |
| 1.3.6.1.4.1.171.11.9.1.2.3 | TableswPortCounterTable | not-accessible | mandatory | A list of port MIB statistic Counter entries. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1 | RowswPortCounterEntry | not-accessible | mandatory | This entry include all the port Counter which support by DES3216, like Bytes received, Bytes Sent ... |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.1 | ColumnswPortCounterGroupIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains infomation. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.2 | ColumnswPortCounterIndex | read-only | mandatory | This object indicate switch hub port number. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.3 | ColumnswPortBytesReceived | read-only | mandatory | The number of good bytes received. Local and dropped packets increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.4 | ColumnswPortBytesSent | read-only | mandatory | The number of good bytes sent. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.5 | ColumnswPortFramesReceived | read-only | mandatory | The number of good frames received. Local and dropped packets increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.6 | ColumnswPortFramesSent | read-only | mandatory | The number of good frames sent. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.7 | ColumnswPortTotalBytesReceived | read-only | mandatory | The number of bytes received(good and bad). |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.8 | ColumnswPortTotalFramesReceived | read-only | mandatory | The number of frames bytes received(good and bad). |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.9 | ColumnswPortBroadcastFramesReceived | read-only | mandatory | The number of good broadcast frames received. Local and dropped packets increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.10 | ColumnswPortMulticastFramesReceived | read-only | mandatory | The number of good multicast frames received. Local and dropped packets increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.11 | ColumnswPortCRCError | read-only | mandatory | The number of frames with valid packet length and CRC error or misaligned(odd number of nibbles) increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.12 | ColumnswPortOversizeFrames | read-only | mandatory | The number of good frames with length more than 1518 bytes ( or 1522 bytes for LongEn = 1). |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.13 | ColumnswPortFragments | read-only | mandatory | The number of good bytes received. Local and dropped packets increment the counter as well. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.14 | ColumnswPortJabber | read-only | mandatory | The number of frames with length more than 1518 bytes and with CRC error or misaligned. |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.15 | ColumnswPortCollision | read-only | mandatory | The number of Collisions |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.16 | ColumnswPortLateCollision | read-only | mandatory | The number of Late Collision(collision occurring later than 576th transmitted bit |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.17 | ColumnswPortFrames64Bytes | read-only | mandatory | The number of good packets with length of 64 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.18 | ColumnswPortFrames65To127Bytes | read-only | mandatory | The number of good packets with length between 65 to 127 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.19 | ColumnswPortFrames128To255Bytes | read-only | mandatory | The number of good packets with length between 128 to 255 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.20 | ColumnswPortFrames256To511Bytes | read-only | mandatory | The number of good packets with length between 256 to 511 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.21 | ColumnswPortFrames512To1023Bytes | read-only | mandatory | The number of good packets with length between 512 to 1023 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.22 | ColumnswPortFrames1024To1522Bytes | read-only | mandatory | The number of good packets with length between 1024 to 1522 bytes |
| 1.3.6.1.4.1.171.11.9.1.2.3.1.23 | ColumnswPortMACRxError | read-only | mandatory | The number of frames with RX MAC Error |