DES3225G-MIB
113 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171 | Nodedlink | |||
| 1.3.6.1.4.1.171.10 | Nodedlink-products | |||
| 1.3.6.1.4.1.171.10.24 | Nodedlink-Des3225gProd | |||
| 1.3.6.1.4.1.171.10.24.1 | NodeswProperty | |||
| 1.3.6.1.4.1.171.10.24.1.1 | NodeportPartition | The trap is sent whenever the port state enter the Partion mode when more than 61 collisions occur while trasmitting. | ||
| 1.3.6.1.4.1.171.10.24.1.1 | NodeswModule | |||
| 1.3.6.1.4.1.171.10.24.1.2 | NodelinkChangeEvent | The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up | ||
| 1.3.6.1.4.1.171.10.24.1.3 | NodebroadcastRisingStorm | The trap indicates that broadcast higher rising threshold . This trap including the port ID | ||
| 1.3.6.1.4.1.171.10.24.1.4 | NodebroadcastFallingStorm | The trap indicates that broadcast higher falling threshold . This trap including the port ID | ||
| 1.3.6.1.4.1.171.11 | Nodedlink-mgmt | |||
| 1.3.6.1.4.1.171.11.24 | Nodedes3225gSeries | |||
| 1.3.6.1.4.1.171.11.24.1 | NodeswDevPackage | |||
| 1.3.6.1.4.1.171.11.24.1.1 | NodeswDevInfo | |||
| 1.3.6.1.4.1.171.11.24.1.1.1 | ScalarswDevInfoSystemUpTime | read-only | mandatory | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then… |
| 1.3.6.1.4.1.171.11.24.1.1.2 | ScalarswDevInfoMaxNumOfModule | read-only | mandatory | The maximum number of modules in this device. |
| 1.3.6.1.4.1.171.11.24.1.1.3 | ScalarswDevInfoTotalNumOfModule | read-only | mandatory | The current actual number of modules in this device.The values range is 1..swDevInfoMaxNumOfModule. |
| 1.3.6.1.4.1.171.11.24.1.1.4 | ScalarswDevInfoTotalNumOfPort | read-only | mandatory | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.24.1.1.5 | ScalarswDevInfoNumOfPortInUse | read-only | mandatory | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.24.1.1.6 | ScalarswDevInfoConsoleInUse | read-only | mandatory | This usage indication of console system. |
| 1.3.6.1.4.1.171.11.24.1.1.7 | ScalarswDevInfoSystemLedStatus | read-only | mandatory | This object is a set of system LED indications. The first four octets is defined as system LED. The first LED is power LED. The second LED is console LED. The … |
| 1.3.6.1.4.1.171.11.24.1.1.8 | ScalarswDevInfoSaveCfg | read-only | mandatory | This object indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are di… |
| 1.3.6.1.4.1.171.11.24.1.2 | NodeswDevCtrl | |||
| 1.3.6.1.4.1.171.11.24.1.2.1 | ScalarswDevCtrlStpState | read-write | mandatory | This object can be enabled or disabled spanning tree algorithm during runtime of the system. When the device is in 802.1Q Vlan mode, this object will be enable… |
| 1.3.6.1.4.1.171.11.24.1.2.2 | ScalarswDevIGMPCaptureState | read-write | mandatory | This object indicates Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.24.1.2.3 | ScalarswDevCtrlPartitionModeState | read-write | mandatory | This object used to enable or disable port auto partition. When the object apply for all ports of the device |
| 1.3.6.1.4.1.171.11.24.1.2.4 | ScalarswDevCtrlTableLockState | read-write | mandatory | This object indicates whether the address table is locked. In other words, the address table doesn't learn any more new address. The aging timer is suspended w… |
| 1.3.6.1.4.1.171.11.24.1.2.5 | ScalarswDevCtrlSaveCfg | write-only | mandatory | As the object is set, the current device configuration is save into to NV-RAM. |
| 1.3.6.1.4.1.171.11.24.1.2.6 | ScalarswDevCtrlHOLState | read-write | mandatory | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea reli… |
| 1.3.6.1.4.1.171.11.24.1.2.7 | ScalarswDevCtrlAddrLookupModesAndHitRate | read-write | mandatory | According to the differnet address looke mode setting, to enlarge the address table size is possible in device. But there is side effect as the higher level yo… |
| 1.3.6.1.4.1.171.11.24.1.2.8 | ScalarswDevCtrlUploadImageFileName | read-write | mandatory | The name of the image file to be uploaded from the device to TFTP server when enabling image upload function (by writing swDevCtrlUploadImage). |
| 1.3.6.1.4.1.171.11.24.1.2.9 | ScalarswDevCtrlUploadImage | write-only | mandatory | Image file upload control. Writing it by any value will immediately invoke image upload function. |
| 1.3.6.1.4.1.171.11.24.1.3 | NodeswDevAlarm | |||
| 1.3.6.1.4.1.171.11.24.1.3.1 | ScalarswDevAlarmPartition | read-write | mandatory | Depending on this object, the device send a trap or not when any one of the device's ports was partitioned. |
| 1.3.6.1.4.1.171.11.24.1.3.2 | ScalarswDevAlarmNewRoot | read-write | mandatory | When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.24.1.3.3 | ScalarswDevAlarmTopologyChange | read-write | mandatory | This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device wh… |
| 1.3.6.1.4.1.171.11.24.1.3.4 | ScalarswDevAlarmLinkChange | read-write | mandatory | This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its … |
| 1.3.6.1.4.1.171.11.24.2 | NodeswModulePackage | |||
| 1.3.6.1.4.1.171.11.24.2.1 | TableswModuleInfoTable | not-accessible | mandatory | A table that contains information about every module. |
| 1.3.6.1.4.1.171.11.24.2.1.1 | RowswModuleInfoEntry | not-accessible | mandatory | A list of information for each module of the device. |
| 1.3.6.1.4.1.171.11.24.2.1.1.1 | ColumnswModuleInfoIndex | read-only | mandatory | This object indicates switch module number.(1..swDevInfoMaxNumOfModule) |
| 1.3.6.1.4.1.171.11.24.2.1.1.2 | ColumnswModuleInfoDesc | read-only | mandatory | A textual description of the module for memorization . |
| 1.3.6.1.4.1.171.11.24.2.1.1.3 | ColumnswModuleInfoType | read-only | mandatory | This object indicates the type of this module. |
| 1.3.6.1.4.1.171.11.24.2.1.1.4 | ColumnswModuleInfoTotalNumOfPort | read-only | mandatory | The number of ports within this module. This value is the sum of the ports within this module. |
| 1.3.6.1.4.1.171.11.24.2.1.1.5 | ColumnswModuleInfoNumOfPortInUse | read-only | mandatory | The number of ports in this module connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.24.2.1.1.6 | ColumnswModuleInfoPortLedStatus | read-only | mandatory | This object is a set of module's port LED indications. Every two bytes are presented to a port. Except the module 3 (Gigabit module) ,the first byte is present… |
| 1.3.6.1.4.1.171.11.24.3 | NodeswPortPackage | |||
| 1.3.6.1.4.1.171.11.24.3.1 | TableswPortInfoTable | not-accessible | mandatory | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.24.3.1.1 | RowswPortInfoEntry | not-accessible | mandatory | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.24.3.1.1.1 | ColumnswPortInfoModuleIndex | read-only | mandatory | This object indicates switch module number.(1..Max module number) |
| 1.3.6.1.4.1.171.11.24.3.1.1.2 | ColumnswPortInfoPortIndex | read-only | mandatory | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.24.3.1.1.3 | ColumnswPortInfoType | read-only | mandatory | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.24.3.1.1.4 | ColumnswPortInfoLinkStatus | read-only | mandatory | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.24.3.1.1.5 | ColumnswPortInfoNwayStatus | read-only | mandatory | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.24.3.1.1.6 | ColumnswPortInfoFlowCtrlStatus | read-only | mandatory | This object indicates the port flow control status. |
| 1.3.6.1.4.1.171.11.24.3.2 | TableswPortCtrlTable | not-accessible | mandatory | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.24.3.2.1 | RowswPortCtrlEntry | not-accessible | mandatory | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.24.3.2.1.1 | ColumnswPortCtrlModuleIndex | read-only | mandatory | This object indicates the device module number.(1..Max module number) |
| 1.3.6.1.4.1.171.11.24.3.2.1.2 | ColumnswPortCtrlPortIndex | read-only | mandatory | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.24.3.2.1.3 | ColumnswPortCtrlAdminState | read-write | mandatory | This object decide the port enabled or disabled. |
| 1.3.6.1.4.1.171.11.24.3.2.1.4 | ColumnswPortCtrlLinkStatusAlarmState | read-write | mandatory | Depending on this object to determine to send a trap or not when link status changes . |
| 1.3.6.1.4.1.171.11.24.3.2.1.5 | ColumnswPortCtrlNwayState | read-write | mandatory | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.24.3.2.1.6 | ColumnswPortCtrlFlowCtrlState | read-write | mandatory | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full dupl… |
| 1.3.6.1.4.1.171.11.24.3.2.1.7 | ColumnswPortCtrlBackPressState | read-write | mandatory | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.171.11.24.3.2.1.8 | ColumnswPortCtrlLockState | read-write | mandatory | The state of this entry. When the swDevCtrlTableLockState object is enabled, the state is not changed. When swVlanInfoStatus is in MAC-Base VLAN mode, this obj… |
| 1.3.6.1.4.1.171.11.24.3.2.1.9 | ColumnswPortCtrlPriority | read-write | mandatory | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packe… |
| 1.3.6.1.4.1.171.11.24.3.2.1.10 | ColumnswPortCtrlStpState | read-write | mandatory | The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enabled(3) indicates that STP is en… |
| 1.3.6.1.4.1.171.11.24.3.2.1.11 | ColumnswPortCtrlHOLState | read-write | mandatory | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea reli… |
| 1.3.6.1.4.1.171.11.24.3.2.1.12 | ColumnswPortCtrlBroadcastRisingThr | read-write | mandatory | This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm control (i.e. swPortCtrlBroadcast… |
| 1.3.6.1.4.1.171.11.24.3.2.1.13 | ColumnswPortCtrlBroadcastFallingThr | read-write | mandatory | This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold condition has been met at least … |
| 1.3.6.1.4.1.171.11.24.3.2.1.14 | ColumnswPortCtrlBroadcastRisingAct | read-write | mandatory | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use but the conditions under which … |
| 1.3.6.1.4.1.171.11.24.3.2.1.15 | ColumnswPortCtrlBroadcastFallingAct | read-write | mandatory | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use but the conditions under which… |
| 1.3.6.1.4.1.171.11.24.3.2.1.16 | ColumnswPortCtrlCleanAllStatisticCounter | write-only | mandatory | Setting this object will reset current device's all statistic counters. |
| 1.3.6.1.4.1.171.11.24.3.3 | TableswPortStTable | not-accessible | mandatory | A list of port statistic Counter entries. |
| 1.3.6.1.4.1.171.11.24.3.3.1 | RowswPortStEntry | not-accessible | mandatory | This entry include all the port statistic Counter which support by the device, like Bytes received, Bytes Sent ... |
| 1.3.6.1.4.1.171.11.24.3.3.1.1 | ColumnswPortStModuleIndex | read-only | mandatory | This object indicates the device module number.(1..Max module number) |
| 1.3.6.1.4.1.171.11.24.3.3.1.2 | ColumnswPortStPortIndex | read-only | mandatory | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.24.3.3.1.3 | ColumnswPortStByteRx | read-only | mandatory | swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every data octet of good packets(unicast + multi- cast + broadcast) received. … |
| 1.3.6.1.4.1.171.11.24.3.3.1.4 | ColumnswPortStByteTx | read-only | mandatory | This counter is incremented once for every data octet of a trans- mitted good packet. |
| 1.3.6.1.4.1.171.11.24.3.3.1.5 | ColumnswPortStFrameRx | read-only | mandatory | swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good packet(unicast + multicast + broadcast ) received. swDevCtrlCounter… |
| 1.3.6.1.4.1.171.11.24.3.3.1.6 | ColumnswPortStFrameTx | read-only | mandatory | This counter is incremented once for every transmitted good packet. |
| 1.3.6.1.4.1.171.11.24.3.3.1.7 | ColumnswPortStTotalBytesRx | read-only | mandatory | This counter is incremented once for every data octet of all received packets. This include data octets of rejected and local packets which are not forwarded t… |
| 1.3.6.1.4.1.171.11.24.3.3.1.8 | ColumnswPortStTotalFramesRx | read-only | mandatory | This counter is incremented once for every received packets. This include rejected and local packets which are not forwarded to the switching core for transmis… |
| 1.3.6.1.4.1.171.11.24.3.3.1.9 | ColumnswPortStBroadcastFramesRx | read-only | mandatory | swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good broadcast packet received. swDevCtrlCounterMode = 3(all-frames):Thi… |
| 1.3.6.1.4.1.171.11.24.3.3.1.10 | ColumnswPortStMulticastFramesRx | read-only | mandatory | swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good multicast packet received. swDevCtrlCounterMode = 3(all-frames):Thi… |
| 1.3.6.1.4.1.171.11.24.3.3.1.11 | ColumnswPortStCRCError | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is between 64 and 1518 bytes inclusiv… |
| 1.3.6.1.4.1.171.11.24.3.3.1.12 | ColumnswPortStOversizeFrames | read-only | mandatory | The number of good frames with length more than 1518 bytes. |
| 1.3.6.1.4.1.171.11.24.3.3.1.13 | ColumnswPortStFragments | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes or packet witho… |
| 1.3.6.1.4.1.171.11.24.3.3.1.14 | ColumnswPortStJabber | read-only | mandatory | The number of frames with length more than 1518 bytes and with CRC error or misaligned. |
| 1.3.6.1.4.1.171.11.24.3.3.1.15 | ColumnswPortStCollision | read-only | mandatory | The number of Collisions |
| 1.3.6.1.4.1.171.11.24.3.3.1.16 | ColumnswPortStLateCollision | read-only | mandatory | The number of Late Collision(collision occurring later than 576th transmitted bit). |
| 1.3.6.1.4.1.171.11.24.3.3.1.17 | ColumnswPortStFrames-64-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 64 bytes. This counter includes reject- ed received and transmitted p… |
| 1.3.6.1.4.1.171.11.24.3.3.1.18 | ColumnswPortStFrames-65-127-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 65 to 127 bytes. This counter includes rejected received and transmit… |
| 1.3.6.1.4.1.171.11.24.3.3.1.19 | ColumnswPortStFrames-128-255-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 128 to 255 bytes. This counter includes rejected received and transmi… |
| 1.3.6.1.4.1.171.11.24.3.3.1.20 | ColumnswPortStFrames-256-511-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 256 to 511 bytes. This counter includes rejected received and transmi… |
| 1.3.6.1.4.1.171.11.24.3.3.1.21 | ColumnswPortStFrames-512-1023-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 512 to 1023 bytes. This counter includ- es rejected received and tran… |
| 1.3.6.1.4.1.171.11.24.3.3.1.22 | ColumnswPortStFrames-1024-1536-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 1024 to 1536 bytes. This counter includ- es rejected received and tra… |
| 1.3.6.1.4.1.171.11.24.3.3.1.23 | ColumnswPortStFramesDroppedFrames | read-only | mandatory | This counter is incremented once for every received dropped pack- et. |
| 1.3.6.1.4.1.171.11.24.3.3.1.24 | ColumnswPortStMulticastFramesTx | read-only | mandatory | The number of multicast frames sent. This counter does not include broadcast packets. |
| 1.3.6.1.4.1.171.11.24.3.3.1.25 | ColumnswPortStBroadcastFramesTx | read-only | mandatory | The number of broadcast frames sent. |
| 1.3.6.1.4.1.171.11.24.3.3.1.26 | ColumnswPortStUndersizeFrames | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes. 2.Packet has v… |
| 1.3.6.1.4.1.171.11.24.4 | NodeswFdbPackage | |||
| 1.3.6.1.4.1.171.11.24.4.1 | TableswFdbStaticTable | not-accessible | mandatory | Like typical legacy bridge devices, FDB table records the mapping of Source MAC Address and its associated source port, and forward incoming packets to its des… |
| 1.3.6.1.4.1.171.11.24.4.1.1 | RowswFdbStaticEntry | not-accessible | mandatory | A list of information specifies which ports the frames with specific destination MAC address to go. |
| 1.3.6.1.4.1.171.11.24.4.1.1.1 | ColumnswFdbStaticVid | read-only | mandatory | This object indicates the VLAN-ID. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0). |
| 1.3.6.1.4.1.171.11.24.4.1.1.2 | ColumnswFdbStaticAddressIndex | read-only | mandatory | The destination MAC address in a frame to which this entry's forwarding information applies. This object can take the value of an unicast address or the multic… |
| 1.3.6.1.4.1.171.11.24.4.1.1.3 | ColumnswFdbStaticPortMap | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.171.11.24.4.1.1.4 | ColumnswFdbStaticState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.24.4.1.1.5 | ColumnswFdbStaticStatus | read-only | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.24.4.2 | TableswFdbFilterTable | not-accessible | mandatory | A table which contains the filtering information of the unicast/multicast entries. This table is used by the transparent switching function in determining how … |
| 1.3.6.1.4.1.171.11.24.4.2.1 | RowswFdbFilterEntry | not-accessible | mandatory | A list of information about a specific unicast/multicast MAC address for which the switch has filtering information. |
| 1.3.6.1.4.1.171.11.24.4.2.1.1 | ColumnswFdbFilterVid | read-only | mandatory | This object indicates the VLAN-ID. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0). |
| 1.3.6.1.4.1.171.11.24.4.2.1.2 | ColumnswFdbFilterAddressIndex | read-only | mandatory | This object indicates a unicast/multicast MAC address for which the bridge has filtering information. |
| 1.3.6.1.4.1.171.11.24.4.2.1.3 | ColumnswFdbFilterState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |