DES3550-L2MGMT-MIB
295 objects
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| SW3500PRIMGMT-MIB | des3550 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.64.2.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.11.64.2.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.1.1 | ScalarswDevInfoSystemUpTime | read-only | current | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then… |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.2 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.3 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.4 | ScalarswDevInfoConsoleInUse | read-only | current | The usage indication of the console system. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.5 | ScalarswDevInfoModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.8 | TableswDevInfoPowerTable | not-accessible | current | A list of the temperature. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1 | RowswDevInfoPowerEntry | not-accessible | current | An entry for Power information. |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.1 | ColumnswDevInfoPowerUnitIndex | read-only | current | Indicates the ID of the unit in the System |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.2 | ColumnswDevInfoPowerID | read-only | current | Indicates ID of the power |
| 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.3 | ColumnswDevInfoPowerStatus | read-only | current | Indicates status of the power |
| 1.3.6.1.4.1.171.11.64.2.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.3 | ScalarswL2DevCtrlRmonState | read-write | current | This object can be enable or disable RMON. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.8 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.9 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.10 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.11 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of variation MAC in the address table. The default value is 1 . |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.12 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval in seconds for triggering the MAC notify message. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.13 | ScalarswL2DevCtrlAsymVlanState | read-write | current | This object can enable or disable asymmetric VLANs during the runtime of the system. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.14 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which Vlan includes system ip and that the Vlan should have been created. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.15 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.2.15.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.15.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object can designate a TCP port. When Telnet is disabled this object isn't accessible. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.16 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls Web status. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object can designate a TCP port. When Web is disabled this object isn't accessible. |
| 1.3.6.1.4.1.171.11.64.2.2.1.2.18 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded. |
| 1.3.6.1.4.1.171.11.64.2.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.64.2.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.64.2.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the… |
| 1.3.6.1.4.1.171.11.64.2.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when a… |
| 1.3.6.1.4.1.171.11.64.2.2.3 | NodeswL2VlanMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.3.1 | TableswL2VlanAdvertisementTable | not-accessible | current | A table containing the advertisement state for each VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.171.11.64.2.2.3.1.1 | RowswL2VlanAdvertisementEntry | not-accessible | current | Advertisement state for each VLAN configured in the device. |
| 1.3.6.1.4.1.171.11.64.2.2.3.1.1.1 | ColumnswL2VlanIndex | read-only | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.64.2.2.3.1.1.2 | ColumnswL2VlanName | read-only | current | An administratively assigned string, which may be used to identify the VLAN. |
| 1.3.6.1.4.1.171.11.64.2.2.3.1.1.3 | ColumnswL2VlanAdvertiseState | read-write | current | This object indicates the advertised status of this VLAN entry. |
| 1.3.6.1.4.1.171.11.64.2.2.4 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.4.1 | TableswL2PortInfoTable | not-accessible | obsolete | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1 | RowswL2PortInfoEntry | not-accessible | obsolete | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | obsolete | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.2 | ColumnswL2PortInfoUnitIndex | read-only | obsolete | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.3 | ColumnswL2PortInfoType | read-only | obsolete | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.4 | ColumnswL2PortInfoLinkStatus | read-only | obsolete | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.5 | ColumnswL2PortInfoNwayStatus | read-only | obsolete | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.6 | ColumnswL2PortInfoModuleType | read-only | obsolete | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.1.1.7 | ColumnswL2PortInfoErrorDisabled | read-only | obsolete | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2 | TableswL2PortCtrlTable | not-accessible | obsolete | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1 | RowswL2PortCtrlEntry | not-accessible | obsolete | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | obsolete | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.2 | ColumnswL2PortCtrlUnitIndex | read-only | obsolete | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.3 | ColumnswL2PortCtrlAdminState | read-write | obsolete | This object decides whether the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.4 | ColumnswL2PortCtrlNwayState | read-write | obsolete | Choose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.5 | ColumnswL2PortCtrlFlowCtrlState | read-write | obsolete | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.6 | ColumnswL2PortCtrlLockState | read-write | obsolete | This object decides whether the port is locked or not. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.7 | ColumnswL2PortCtrlMACNotifyState | read-write | obsolete | This object decides whether MAC notification is enabled or not. |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.8 | ColumnswL2PortCtrlMulticastfilter | read-write | obsolete | This object decides the multicast packet filtering mode on this port . |
| 1.3.6.1.4.1.171.11.64.2.2.4.2.1.11 | ColumnswL2PortCtrlMdixState | read-write | obsolete | This object decides the MDIX mode on this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4 | TableswL2PortInformationTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1 | RowswL2PortInformationEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.1 | ColumnswL2PortInformationPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.2 | ColumnswL2PortInformationMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.3 | ColumnswL2PortInformationUnitID | read-only | current | Indicates ID of the unit in the system |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.4 | ColumnswL2PortInformationType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.5 | ColumnswL2PortInformationLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.6 | ColumnswL2PortInformationNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.7 | ColumnswL2PortInformationModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.4.1.8 | ColumnswL2PortInformationErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5 | TableswL2PortControlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1 | RowswL2PortControlEntry | not-accessible | current | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.1 | ColumnswL2PortControlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.2 | ColumnswL2PortControlMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.3 | ColumnswL2PortControlUnitIndex | read-only | current | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.4 | ColumnswL2PortControlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.5 | ColumnswL2PortControlNwayState | read-write | current | Choose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.6 | ColumnswL2PortControlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.7 | ColumnswL2PortControlLockState | read-write | obsolete | This object decides whether the port is locked or not. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.8 | ColumnswL2PortControlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.9 | ColumnswL2PortControlMulticastfilter | read-write | current | This object controls the multicast port filtering mode for a specified port. |
| 1.3.6.1.4.1.171.11.64.2.2.4.5.1.11 | ColumnswL2PortControlMdixState | read-write | current | This object decides the MDIX mode on this port. |
| 1.3.6.1.4.1.171.11.64.2.2.5 | NodeswL2LimitedMulticastMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.5.1 | TableswL2MulticastRangeTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.5.1.1 | RowswL2MulticastRangeEntry | not-accessible | current | A list of information contained in swL2MulticastRangeTable. |
| 1.3.6.1.4.1.171.11.64.2.2.5.1.1.1 | ColumnswL2MulticastRangeName | read-only | current | This object specifies the multicast range name. |
| 1.3.6.1.4.1.171.11.64.2.2.5.1.1.2 | ColumnswL2MulticastRangeFromIp | read-create | current | This object specifies the start IP address for this range. |
| 1.3.6.1.4.1.171.11.64.2.2.5.1.1.3 | ColumnswL2MulticastRangeToIp | read-create | current | This object specifies the end IP address for this range. |
| 1.3.6.1.4.1.171.11.64.2.2.5.1.1.4 | ColumnswL2MulticastRangeRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2 | NodeswL2LimitedMulticastPortInfo | |||
| 1.3.6.1.4.1.171.11.64.2.2.5.2.1 | TableswL2LimitedMulticastStatusTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1 | RowswL2LimitedMulticastStatusEntry | not-accessible | current | A list of information contained in swL2LimitedMulticastStatusTable. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.1 | ColumnswL2LimitedMulticastPort | read-only | current | This object indicates the port. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.2 | ColumnswL2LimitedMulticastAccess | read-write | current | This object indicates the access type. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.3 | ColumnswL2LimitedMulticastState | read-write | current | This object indicates the state for this port. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2 | TableswL2LimitedMulticastRangeTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1 | RowswL2LimitedMulticastRangeEntry | not-accessible | current | A list of information contained in swL2LimitedMulticastRangeTable. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.1 | ColumnswL2LimitedMulticastID | read-only | current | This object indicates the range ID. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.2 | ColumnswL2LimitedMulticastRangeName | read-create | current | |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.3 | ColumnswL2LimitedMulticastFromIp | read-only | current | This object specifies the start IP address of the range on this port. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.4 | ColumnswL2LimitedMulticastToIp | read-only | current | This object specifies the end IP address of the range on this port. |
| 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.5 | ColumnswL2LimitedMulticastRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.6 | NodeswL2QOSMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.6.1 | TableswL2QOSBandwidthControlTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1 | RowswL2QOSBandwidthControlEntry | not-accessible | current | A list of information contained in swL2QOSBandwidthControlTable. |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1.1 | ColumnswL2QOSBandwidthPortIndex | read-only | current | Indicates the port. |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1.2 | ColumnswL2QOSBandwidthRxRate | read-write | current | Indicates the RX Rate(Mbit/sec) of the specifed port. Value 0 means no limit. |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1.3 | ColumnswL2QOSBandwidthTxRate | read-write | current | Indicates the TX Rate(Mbit/sec) of the specifed port. Value 0 means no limit. |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1.4 | ColumnswL2QOSBandwidthRadiusRxRate | read-only | current | The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. |
| 1.3.6.1.4.1.171.11.64.2.2.6.1.1.5 | ColumnswL2QOSBandwidthRadiusTxRate | read-only | current | The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. |
| 1.3.6.1.4.1.171.11.64.2.2.6.2 | TableswL2QOSSchedulingTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.6.2.1 | RowswL2QOSSchedulingEntry | not-accessible | current | A list of information contained in swL2QOSSchedulingTable. |
| 1.3.6.1.4.1.171.11.64.2.2.6.2.1.1 | ColumnswL2QOSSchedulingClassIndex | read-only | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.11.64.2.2.6.2.1.2 | ColumnswL2QOSSchedulingMaxPkts | read-write | current | Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its … |
| 1.3.6.1.4.1.171.11.64.2.2.6.2.1.3 | ColumnswL2QOSSchedulingMaxLatency | read-write | current | Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin tr… |
| 1.3.6.1.4.1.171.11.64.2.2.6.3 | TableswL2QOS8021pUserPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.6.3.1 | RowswL2QOS8021pUserPriorityEntry | not-accessible | current | A list of information contained in swL2QOS8021pUserPriorityTable. |
| 1.3.6.1.4.1.171.11.64.2.2.6.3.1.1 | ColumnswL2QOS8021pUserPriorityIndex | read-only | current | The 802.1p user priority . |
| 1.3.6.1.4.1.171.11.64.2.2.6.3.1.2 | ColumnswL2QOS8021pUserPriorityClass | read-write | current | The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) a… |
| 1.3.6.1.4.1.171.11.64.2.2.6.4 | TableswL2QOS8021pDefaultPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.64.2.2.6.4.1 | RowswL2QOS8021pDefaultPriorityEntry | not-accessible | current | A list of information contained in swL2QOS8021pDefaultPriorityTable. |
| 1.3.6.1.4.1.171.11.64.2.2.6.4.1.1 | ColumnswL2QOS8021pDefaultPriorityIndex | read-only | current | Indicates the port number. |
| 1.3.6.1.4.1.171.11.64.2.2.6.4.1.2 | ColumnswL2QOS8021pDefaultPriority | read-write | current | The priority value to assign to untagged packets received by the switch ports on the switch. |
| 1.3.6.1.4.1.171.11.64.2.2.6.4.1.3 | ColumnswL2QOS8021pRadiusPriority | read-only | current | Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. |
| 1.3.6.1.4.1.171.11.64.2.2.7 | NodeswL2IpMacBindingMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.7.1 | TableswL2IpMacBindingPortTable | not-accessible | current | The table specifies the port's ip-mac binding function. |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1 | RowswL2IpMacBindingPortEntry | not-accessible | current | A list of information about the port's ip-mac binding function. |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.1 | ColumnswL2IpMacBindingPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.2 | ColumnswL2IpMacBindingPortState | read-write | current | This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): SW learning enable-loose (4) : HW learning |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.3 | ColumnswL2IpMacBindingPortAllowZeroIp | read-write | current | This object enables/disables the allow zero IP status on the specified port. |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.4 | ColumnswL2IpMacBindingPortForwardDhcpPkt | read-write | current | This object can be set to forward or not forward DHCP packets on the specified port. |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.5 | ColumnswL2IpMacBindingPortDHCPSnoopMaxEntry | read-write | current | This object indicates the max entry created by DHCP packets on the specified port. Note: When 0 is set on the specified port, the max entry created by DHCP pac… |
| 1.3.6.1.4.1.171.11.64.2.2.7.1.1.6 | ColumnswL2IpMacBindingPortDHCPSnoopEntryClearAction | read-write | current | When set to start(2), the address binding entries learned for the specified ports will be cleared. When get, it always returns other (1). |
| 1.3.6.1.4.1.171.11.64.2.2.7.2 | TableswL2IpMacBindingTable | not-accessible | current | This table specifies IP-MAC binding information. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1 | RowswL2IpMacBindingEntry | not-accessible | current | IP-MAC binding entry used to add\delete\configure the address pair to the switch's authorized user database. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.1 | ColumnswL2IpMacBindingIpIndex | read-only | current | The IP address of the IP-MAC binding. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.2 | ColumnswL2IpMacBindingMac | read-create | current | The MAC address of the IP-MAC binding. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.3 | ColumnswL2IpMacBindingStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.4 | ColumnswL2IpMacBindingPorts | read-create | current | The port members of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.5 | ColumnswL2IpMacBindingAction | read-only | current | The action of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.2.1.6 | ColumnswL2IpMacBindingMode | read-create | current | The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified… |
| 1.3.6.1.4.1.171.11.64.2.2.7.3 | TableswL2IpMacBindingBlockedTable | not-accessible | current | The table specifies information of MAC addresses which were blocked. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1 | RowswL2IpMacBindingBlockedEntry | not-accessible | current | The entry can not create/configure. It can only delete. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1.1 | ColumnswL2IpMacBindingBlockedVID | read-only | current | The object specifies the VLAN ID. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1.2 | ColumnswL2IpMacBindingBlockedMac | read-only | current | The MAC address which was blocked. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1.3 | ColumnswL2IpMacBindingBlockedVlanName | read-only | current | This object specifies the VLAN name. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1.4 | ColumnswL2IpMacBindingBlockedPort | read-only | current | The port with which the MAC is associated. |
| 1.3.6.1.4.1.171.11.64.2.2.7.3.1.5 | ColumnswL2IpMacBindingBlockedType | read-write | current | The value is always blockByAddrBind. This entry will be deleted by setting the value to delete(3). |
| 1.3.6.1.4.1.171.11.64.2.2.7.4 | ScalarswL2IpMacBindingAllPortState | read-write | current | This object enables/disables IP-MAC binding on all ports of the system. This action is only applicable when users have write privileges, and can only be viewed… |
| 1.3.6.1.4.1.171.11.64.2.2.7.5 | ScalarswL2IpMacBindingTrapLogState | read-write | current | when set to enable(2),whenever there's a new MAC that violates the pre-defined Ip Mac Binding configuration, the trap will be sent out and the relevant informa… |
| 1.3.6.1.4.1.171.11.64.2.2.7.6 | ScalarswL2IpMacBindingACLMode | read-write | current | when set to enable(2), the Ip Mac Binding will use acl mode |
| 1.3.6.1.4.1.171.11.64.2.2.7.7 | ScalarswL2IpMacBindingDHCPSnoopState | read-write | current | When the dhcp_snoop function is enabled, all address_binding disabled ports will act as DHCP server ports (the switch will learn IP addresses through DHCP serv… |
| 1.3.6.1.4.1.171.11.64.2.2.7.8 | ScalarswL2IpMacBindingDHCPSnoopEntryClearAllState | read-write | current | Used to clear all entries created by DHCP packets. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9 | TableswL2IpMacBindingDHCPSnoopTable | not-accessible | current | The table specifies information regarding the DHCP snooping function learning IP-MAC binding entries. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1 | RowswL2IpMacBindingDHCPSnoopEntry | not-accessible | current | A list of information about the DHCP snooping learning IP-MAC binding entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1.1 | ColumnswL2IpMacBindingDHCPSnoopIpIndex | read-only | current | The IP address of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1.2 | ColumnswL2IpMacBindingDHCPSnoopMac | read-only | current | The MAC address of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1.3 | ColumnswL2IpMacBindingDHCPSnoopLeaseTime | read-only | current | Specifies the lease time of this entry. When the lease time expires, this entry will be removed from this port. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1.4 | ColumnswL2IpMacBindingDHCPSnoopPort | read-only | current | Specifies the port of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.9.1.5 | ColumnswL2IpMacBindingDHCPSnoopStatus | read-only | current | Specifies the status (inactive or active) of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10 | TableswL2IpMacBindingPermitIPPoolTable | not-accessible | current | This table specifies the permitted IP pool of IP-MAC binding. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10.1 | RowswL2IpMacBindingPermitIPPoolEntry | not-accessible | current | A list of information of each permitted IP pool entry. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10.1.1 | ColumnswL2IpMacBindingPermitIPPoolStartIP | read-only | current | The start IP address of the permitted IP pool. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10.1.2 | ColumnswL2IpMacBindingPermitIPPoolEndIP | read-only | current | The end IP address of the permitted IP pool. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10.1.3 | ColumnswL2IpMacBindingPermitIPPoolPorts | read-create | current | The port members of the permitted IP pool. |
| 1.3.6.1.4.1.171.11.64.2.2.7.10.1.4 | ColumnswL2IpMacBindingPermitIPPoolStatus | read-create | current | The status of the permitted IP pool. |
| 1.3.6.1.4.1.171.11.64.2.2.8 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.8.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.64.2.2.8.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index of logical port trunk. The trunk group number depends on the existence of the unit and module. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.2 | ColumnswL2TrunkName | read-create | current | The name of logical port trunk. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the maste… |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . |
| 1.3.6.1.4.1.171.11.64.2.2.8.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.8.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.64.2.2.9 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.9.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is … |
| 1.3.6.1.4.1.171.11.64.2.2.9.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the ingress of the source port packet to be sniffed. |
| 1.3.6.1.4.1.171.11.64.2.2.9.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the egress of the source port packet to be sniffed. |
| 1.3.6.1.4.1.171.11.64.2.2.9.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for ea… |
| 1.3.6.1.4.1.171.11.64.2.2.10 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.10.1 | ScalarswL2IGMPMaxSupportedVlans | read-only | current | Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable). |
| 1.3.6.1.4.1.171.11.64.2.2.10.3 | TableswL2IGMPCtrlTable | not-accessible | current | This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one … |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1 | RowswL2IGMPCtrlEntry | not-accessible | current | The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.1 | ColumnswL2IGMPCtrlVid | read-only | current | This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-… |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.2 | ColumnswL2IGMPQueryInterval | read-write | current | The frequency at which the IGMP Host-Query packets are transmitted on this switch. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.3 | ColumnswL2IGMPMaxResponseTime | read-write | current | The maximum query response time on this switch. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.4 | ColumnswL2IGMPRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be inc… |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.5 | ColumnswL2IGMPLastMemberQueryInterval | read-write | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.6 | ColumnswL2IGMPHostTimeout | read-write | current | The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to sen… |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.7 | ColumnswL2IGMPRouteTimeout | read-write | current | The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.8 | ColumnswL2IGMPLeaveTimer | read-write | current | When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveT… |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.9 | ColumnswL2IGMPQueryState | read-write | current | This object decides if the IGMP query is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.10 | ColumnswL2IGMPCurrentState | read-only | current | This object indicates the current IGMP query state. |
| 1.3.6.1.4.1.171.11.64.2.2.10.3.1.11 | ColumnswL2IGMPCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for ea… |
| 1.3.6.1.4.1.171.11.64.2.2.10.4 | TableswL2IGMPQueryInfoTable | not-accessible | current | The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.171.11.64.2.2.10.4.1 | RowswL2IGMPQueryInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled. |
| 1.3.6.1.4.1.171.11.64.2.2.10.4.1.1 | ColumnswL2IGMPInfoVid | read-only | current | This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCt… |
| 1.3.6.1.4.1.171.11.64.2.2.10.4.1.2 | ColumnswL2IGMPInfoQueryCount | read-only | current | This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.64.2.2.10.4.1.3 | ColumnswL2IGMPInfoTxQueryCount | read-only | current | This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to … |
| 1.3.6.1.4.1.171.11.64.2.2.10.5 | TableswL2IGMPInfoTable | not-accessible | current | The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associate… |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1 | RowswL2IGMPInfoEntry | not-accessible | current | Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN en… |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1.1 | ColumnswL2IGMPVid | read-only | current | This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network. |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1.2 | ColumnswL2IGMPGroupIpAddr | read-only | current | This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1.3 | ColumnswL2IGMPMacAddr | read-only | current | This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1.4 | ColumnswL2IGMPPortMap | read-only | current | This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. … |
| 1.3.6.1.4.1.171.11.64.2.2.10.5.1.5 | ColumnswL2IGMPIpGroupReportCount | read-only | current | This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6 | TableswL2IGMPMulticastVlanTable | not-accessible | current | The information of the IGMP snooping multicast VLAN table. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1 | RowswL2IGMPMulticastVlanEntry | not-accessible | current | The entry of swL2IGMPMulticastVlanTable. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.1 | ColumnswL2IGMPMulticastVlanid | read-only | current | This object indicates the VLAN id of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.2 | ColumnswL2IGMPMulticastVlanName | read-create | current | This object indicates the VLAN name of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.3 | ColumnswL2IGMPMulticastVlanSourcePort | read-create | current | This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGM… |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.4 | ColumnswL2IGMPMulticastVlanMemberPort | read-create | current | This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the I… |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.5 | ColumnswL2IGMPMulticastVlanRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.6.1.6 | ColumnswL2IGMPMulticastVlanReplaceSourceIP | read-create | current | This object is used to replace the source IP address in the IP header for IGMP control packets. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7 | TableswL2IGMPRouterPortTable | not-accessible | current | The information of the router port table. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1 | RowswL2IGMPRouterPortEntry | not-accessible | current | The entry of swL2IGMPRouterPortTable. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1.1 | ColumnswL2IGMPRouterPortVlanid | read-only | current | This object indicates the VLAN id of the router port entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1.2 | ColumnswL2IGMPRouterPortVlanName | read-only | current | This object indicates the VLAN name of the router port entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1.3 | ColumnswL2IGMPRouterPortStaticPortList | read-write | current | This object indicates the static portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1.4 | ColumnswL2IGMPRouterPortDynamicPortList | read-only | current | This object indicates the dynamic portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.64.2.2.10.7.1.5 | ColumnswL2IGMPRouterPortForbiddenPortList | read-write | current | This object indicates the forbidden portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.64.2.2.11 | NodeswL2DhcpRelayMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.11.1 | ScalarswL2DhcpRelayState | read-write | obsolete | This object indicates if the DHCP relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.11.2 | ScalarswL2DhcpRelayHopCount | read-write | obsolete | This object indicates the maximum number of router hops that the DHCP packets can cross. |
| 1.3.6.1.4.1.171.11.64.2.2.11.3 | ScalarswL2DhcpRelayTimeThreshold | read-write | obsolete | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP … |
| 1.3.6.1.4.1.171.11.64.2.2.11.4 | ScalarswL2DhcpRelayOption82State | read-write | obsolete | This object indicates if the DHCP relay agent information option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.11.5 | ScalarswL2DhcpRelayOption82Check | read-write | obsolete | This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. |
| 1.3.6.1.4.1.171.11.64.2.2.11.6 | ScalarswL2DhcpRelayOption82Policy | read-write | obsolete | This object indicates the re-forwarding policy is DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2)… |
| 1.3.6.1.4.1.171.11.64.2.2.11.7 | TableswL2DhcpRelayCtrlTable | not-accessible | obsolete | This table specifies the IP address og the destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.64.2.2.11.7.1 | RowswL2DhcpRelayCtrlEntry | not-accessible | obsolete | A list of information specifying the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.64.2.2.11.7.1.1 | ColumnswL2DhcpRelayCtrlInterfaceName | read-only | obsolete | The name of the IP interface. |
| 1.3.6.1.4.1.171.11.64.2.2.11.7.1.2 | ColumnswL2DhcpRelayCtrlServer | read-only | obsolete | The DHCP server IP address. |
| 1.3.6.1.4.1.171.11.64.2.2.11.7.1.3 | ColumnswL2DhcpRelayCtrlState | read-write | obsolete | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.64.2.2.12 | NodeswL2LoopDetectMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.12.1 | NodeswL2LoopDetectCtrl | |||
| 1.3.6.1.4.1.171.11.64.2.2.12.1.1 | ScalarswL2LoopDetectAdminState | read-write | current | This object indicates the loopback detection status of the system. |
| 1.3.6.1.4.1.171.11.64.2.2.12.1.2 | ScalarswL2LoopDetectInterval | read-write | current | This object indicates the interval value, the range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.11.64.2.2.12.1.3 | ScalarswL2LoopDetectRecoverTime | read-write | current | This object indicates the recover time, the range is from 60 to 1000000. A value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.11.64.2.2.12.1.4 | ScalarswL2LoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.11.64.2.2.12.2 | NodeswL2LoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1 | TableswL2LoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by the port. |
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1 | RowswL2LoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by the port. |
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.1 | ColumnswL2LoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.2 | ColumnswL2LoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.3 | ColumnswL2LoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.4 | ColumnswL2LoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.11.64.2.2.13 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.13.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.64.2.2.13.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information specifying the port with its traffic forward list. |
| 1.3.6.1.4.1.171.11.64.2.2.13.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.64.2.2.13.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list that the specific port can forward traffic to. |
| 1.3.6.1.4.1.171.11.64.2.2.14 | NodeswL2PortSecurityMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.14.1 | TableswL2PortSecurityControlTable | not-accessible | current | port security feature which controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled.… |
| 1.3.6.1.4.1.171.11.64.2.2.14.1.1 | RowswL2PortSecurityControlEntry | not-accessible | current | A list of information contained in swL2PortSecurityControlTable. |
| 1.3.6.1.4.1.171.11.64.2.2.14.1.1.1 | ColumnswL2PortSecurityPortIndex | read-only | current | Indicates the secured port to lock address learning. |
| 1.3.6.1.4.1.171.11.64.2.2.14.1.1.2 | ColumnswL2PortSecurityMaxLernAddr | read-write | current | Indicates allowable number of addresses to be learned at this port. |
| 1.3.6.1.4.1.171.11.64.2.2.14.1.1.3 | ColumnswL2PortSecurityMode | read-write | current | Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer has expired. In this mode, when the … |
| 1.3.6.1.4.1.171.11.64.2.2.14.1.1.4 | ColumnswL2PortSecurityAdmState | read-write | current | Indicates the administration state of the locking address. |
| 1.3.6.1.4.1.171.11.64.2.2.14.2 | ScalarswL2PortSecurityTrapLogState | read-write | current | when enable(2),whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will … |
| 1.3.6.1.4.1.171.11.64.2.2.15 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.0 | NodeswL2MgmtMIBTrapPrefix | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.0.3 | NotificationswL2macNotification | current | This trap indicate the MAC addresses variation in the address table . | |
| 1.3.6.1.4.1.171.11.64.2.2.15.0.4 | NotificationswL2porttypechgNotification | current | This trap indicates the port type change. | |
| 1.3.6.1.4.1.171.11.64.2.2.15.0.5 | NotificationswPowerStatusChg | current | Power Status change notification. The notification is issued when the swPowerStatus changes as in the following cases: lowVoltage -> overCurrent. lowVoltage ->… | |
| 1.3.6.1.4.1.171.11.64.2.2.15.0.6 | NotificationswPowerFailure | current | Power Failure notification. The notification issues when the swPowerStatus changes as in the following cases: lowVoltage -> fail. overCurrent -> fail. working … | |
| 1.3.6.1.4.1.171.11.64.2.2.15.0.7 | NotificationswPowerRecover | current | Power Recover notification. The notification issues when the swPowerStatus changes as in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> … | |
| 1.3.6.1.4.1.171.11.64.2.2.15.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates information about the last time the system rebooted. |
| 1.3.6.1.4.1.171.11.64.2.2.15.2 | Nodeswl2NotifyPortSecurity | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.2.1 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violated the port security configuration. |
| 1.3.6.1.4.1.171.11.64.2.2.15.2.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration a trap will be sent out | |
| 1.3.6.1.4.1.171.11.64.2.2.15.3 | Nodeswl2NotifyIpMacBinding | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.3.1 | ScalarswL2IpMacBindingViolationIP | accessible-for-notify | current | This object indicates the MAC address that violates the IP-Mac Binging configuration. |
| 1.3.6.1.4.1.171.11.64.2.2.15.3.2 | ScalarswL2IpMacBindingViolationMac | accessible-for-notify | current | This object indicates the IP address that violates the IP-Mac Binging configuration. |
| 1.3.6.1.4.1.171.11.64.2.2.15.3.3 | NotificationswL2IpMacBindingViolationTrap | current | When the IP-Mac Binding trap is enabled, if there's a new MAC that violates the pre-defined port security configuration a trap will be sent out | |
| 1.3.6.1.4.1.171.11.64.2.2.15.4 | Nodeswl2NotifyLoopDetect | |||
| 1.3.6.1.4.1.171.11.64.2.2.15.4.1 | ScalarswL2VlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that has detected a loopback. |
| 1.3.6.1.4.1.171.11.64.2.2.15.4.2 | NotificationswL2PortLoopOccurred | current | The trap is sent when a Port loop occurs. | |
| 1.3.6.1.4.1.171.11.64.2.2.15.4.3 | NotificationswL2PortLoopRestart | current | The trap is sent when a Port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.64.2.2.15.4.4 | NotificationswL2VlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.11.64.2.2.15.4.5 | NotificationswL2VlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.64.2.2.24 | NodeswL2DhcpLocalRelayMgmt | |||
| 1.3.6.1.4.1.171.11.64.2.2.24.1 | ScalarswL2DhcpLocalRelayState | read-write | current | This object indicates the status of the DHCP local relay function of the switch. |
| 1.3.6.1.4.1.171.11.64.2.2.24.2 | TableswL2DhcpLocalRelayVLANTable | not-accessible | current | This table is used to manage the DHCP local relay status for each VLAN. |
| 1.3.6.1.4.1.171.11.64.2.2.24.2.1 | RowswL2DhcpLocalRelayVLANEntry | not-accessible | current | This object lists the current VLANs in the switch and their corresponding DHCP local relay status. |
| 1.3.6.1.4.1.171.11.64.2.2.24.2.1.1 | ColumnswL2DhcpLocalRelayVLANID | read-only | current | This object shows the VIDs of the current VLANS in the switch. |
| 1.3.6.1.4.1.171.11.64.2.2.24.2.1.2 | ColumnswL2DhcpLocalRelayVLANState | read-write | current | This object indicates the status of the DHCP relay function of the VLAN. |