MIB Viewer

DES3552-L2MGMT-MIB

296 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
DLINK-ID-REC-MIBAgentNotifyLevel
Q-BRIDGE-MIB--PortList
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString RowStatus TruthValue
SWDES3528-52PRIMGMT-MIBdes3552
OIDNameAccessStatusDescription
1.3.6.1.4.1.171.11.105.3.2IdentityswL2MgmtMIBThe Structure of Layer 2 Network Management Information.
1.3.6.1.4.1.171.11.105.3.2.1NodeswL2DevMgmt
1.3.6.1.4.1.171.11.105.3.2.1.1NodeswL2DevInfo
1.3.6.1.4.1.171.11.105.3.2.1.1.1ScalarswDevInfoTotalNumOfPortread-onlycurrentThe number of ports within this switch. This value is the sum of the ports within this switch.
1.3.6.1.4.1.171.11.105.3.2.1.1.2ScalarswDevInfoNumOfPortInUseread-onlycurrentThe number of ports in this switch connected to the segment or the end stations.
1.3.6.1.4.1.171.11.105.3.2.1.1.4ScalarswDevInfoFrontPanelLedStatusread-onlycurrentThis object is a set of system LED indications. The first five octets are defined as system LED. The first two octets are currently unused and must be set to z…
1.3.6.1.4.1.171.11.105.3.2.1.2NodeswL2DevCtrl
1.3.6.1.4.1.171.11.105.3.2.1.2.1ScalarswL2DevCtrlStpStateread-writecurrentThis object can enable or disable the spanning tree algorithm during the runtime of the system.
1.3.6.1.4.1.171.11.105.3.2.1.2.2ScalarswL2DevCtrlIGMPSnoopingread-writecurrentThis object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.1.2.3ScalarswL2DevCtrlIGMPSnoopingMcstRTOnlyread-writecurrentThis object controls IGMP snooping forward multicast routing only state.
1.3.6.1.4.1.171.11.105.3.2.1.2.5ScalarswL2DevCtrlSnmpTrapStateread-writecurrentThis object controls the SNMP trap status.
1.3.6.1.4.1.171.11.105.3.2.1.2.6ScalarswL2DevCtrlCleanAllStatisticCounterread-writecurrentWhen the object is set to active, all statistical counters will be cleared. If set to normal, no action.
1.3.6.1.4.1.171.11.105.3.2.1.2.7ScalarswL2DevCtrlVlanIdOfFDBTblread-writecurrentIndicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT_VLAN_ID of the system.
1.3.6.1.4.1.171.11.105.3.2.1.2.8ScalarswL2MACNotifyStateread-writecurrentThis object can enable or disable MAC Notification.
1.3.6.1.4.1.171.11.105.3.2.1.2.9ScalarswL2MACNotifyHistorySizeread-writecurrentThis object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 .
1.3.6.1.4.1.171.11.105.3.2.1.2.10ScalarswL2MACNotifyIntervalread-writecurrentThis object indicates the time interval, in seconds, which will trigger MAC notification messages.
1.3.6.1.4.1.171.11.105.3.2.1.2.13ScalarswL2DevCtrlAsymVlanStateread-writecurrentThis object enables or disables asymmetric VLANs during the runtime of the system.
1.3.6.1.4.1.171.11.105.3.2.1.2.14NodeswL2DevCtrlTelnet
1.3.6.1.4.1.171.11.105.3.2.1.2.14.1ScalarswL2DevCtrlTelnetStateread-writecurrentThis object controls the Telnet status.
1.3.6.1.4.1.171.11.105.3.2.1.2.14.2ScalarswL2DevCtrlTelnetTcpPortread-writecurrentThis object designates TCP ports. When Telnet is disabled, this object is not accessible.
1.3.6.1.4.1.171.11.105.3.2.1.2.16ScalarswL2DevCtrlManagementVlanIdread-writecurrentThis object controls which previously created VLANs are included in the System IP Interface.
1.3.6.1.4.1.171.11.105.3.2.1.2.17NodeswL2DevCtrlWeb
1.3.6.1.4.1.171.11.105.3.2.1.2.17.1ScalarswL2DevCtrlWebStateread-writecurrentThis object controls the Web status.
1.3.6.1.4.1.171.11.105.3.2.1.2.17.2ScalarswL2DevCtrlWebTcpPortread-writecurrentThis object designates TCP ports. When Web is disabled, this object is not accessible.
1.3.6.1.4.1.171.11.105.3.2.1.2.18ScalarswL2DevCtrlLLDPStateread-writecurrentSpecifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets…
1.3.6.1.4.1.171.11.105.3.2.1.2.19ScalarswL2DevCtrlLLDPForwardMessageStateread-writecurrentWhen lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded.
1.3.6.1.4.1.171.11.105.3.2.1.2.20ScalarswL2DevCtrlIpAutoconfigread-writecurrentThis object controls the IP auto configuration state.
1.3.6.1.4.1.171.11.105.3.2.1.2.21NodeswL2DevCtrlCFM
1.3.6.1.4.1.171.11.105.3.2.1.2.21.1ScalarswL2DevCtrlCFMStateread-writecurrentThis object indicates the CFM global state.
1.3.6.1.4.1.171.11.105.3.2.1.2.21.2TableswL2DevCtrlCFMPortTablenot-accessiblecurrentA table containing CFM state of speicified ports.
1.3.6.1.4.1.171.11.105.3.2.1.2.21.2.1RowswL2DevCtrlCFMPortEntrynot-accessiblecurrentThe entry of CFM state on speicified ports.
1.3.6.1.4.1.171.11.105.3.2.1.2.21.2.1.1ColumnswL2DevCtrlCFMPortIndexnot-accessiblecurrentThis object indicates the port-num.
1.3.6.1.4.1.171.11.105.3.2.1.2.21.2.1.2ColumnswL2DevCtrlCFMPortStateread-writecurrentThis object indicates the CFM state on per-port.
1.3.6.1.4.1.171.11.105.3.2.1.2.22ScalarswL2DevCtrlVLANTrunkStateread-writecurrentThis indicates the global state of the VLAN trunking feature of the device.
1.3.6.1.4.1.171.11.105.3.2.1.3NodeswL2DevAlarm
1.3.6.1.4.1.171.11.105.3.2.1.3.1ScalarswL2DevAlarmNewRootread-writecurrentWhen the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap.
1.3.6.1.4.1.171.11.105.3.2.1.3.2ScalarswL2DevAlarmTopologyChangeread-writecurrentThis object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by …
1.3.6.1.4.1.171.11.105.3.2.1.3.3ScalarswL2DevAlarmLinkChangeread-writecurrentThis object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device…
1.3.6.1.4.1.171.11.105.3.2.2NodeswL2VLANMgmt
1.3.6.1.4.1.171.11.105.3.2.2.1TableswL2VlanStaticTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi…
1.3.6.1.4.1.171.11.105.3.2.2.1.1RowswL2VlanStaticEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.171.11.105.3.2.2.1.1.1ColumnswL2VlanIndexnot-accessiblecurrentThe VLAN-ID or other identifier referring to this VLAN.
1.3.6.1.4.1.171.11.105.3.2.2.1.1.2ColumnswL2VLANAdvertisementread-writecurrentThis object indicates if the advertisement is active or not.
1.3.6.1.4.1.171.11.105.3.2.2.2ScalarswL2PVIDAutoAssignmentStateread-writecurrentThis object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID can only be changed by PVID configuration (user changes explicitly)…
1.3.6.1.4.1.171.11.105.3.2.2.3TableswL2VlanPortInfoTablenot-accessiblecurrentA table containing vlan and port role information of each port.
1.3.6.1.4.1.171.11.105.3.2.2.3.1RowswL2VlanPortInfoEntrynot-accessiblecurrentThe table entry of vlan port information.
1.3.6.1.4.1.171.11.105.3.2.2.3.1.1ColumnswL2VlanPortInfoPortIndexread-onlycurrentThe port index.
1.3.6.1.4.1.171.11.105.3.2.2.3.1.2ColumnswL2VlanPortInfoVidread-onlycurrentThe VLAN-ID assigned to a special port
1.3.6.1.4.1.171.11.105.3.2.2.3.1.3ColumnswL2VlanPortInfoPortRoleread-onlycurrentThe port role of a special port.when none,it means this port is not belong to the vlan.
1.3.6.1.4.1.171.11.105.3.2.2.6ScalarswL2NniGvrpBpduAddressread-writecurrentSpecifies the GVRP's BPDU MAC address of NNI port In Q-in_Q status.
1.3.6.1.4.1.171.11.105.3.2.3NodeswL2PortMgmt
1.3.6.1.4.1.171.11.105.3.2.3.1TableswL2PortInfoTablenot-accessiblecurrentA table that contains information about every port.
1.3.6.1.4.1.171.11.105.3.2.3.1.1RowswL2PortInfoEntrynot-accessiblecurrentA list of information for each port of the device.
1.3.6.1.4.1.171.11.105.3.2.3.1.1.1ColumnswL2PortInfoPortIndexread-onlycurrentThis object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.105.3.2.3.1.1.2ColumnswL2PortInfoMediumTyperead-onlycurrentIndicates medium type of the port number.
1.3.6.1.4.1.171.11.105.3.2.3.1.1.3ColumnswL2PortInfoUnitIDread-onlycurrentIndicates ID of the unit in the system
1.3.6.1.4.1.171.11.105.3.2.3.1.1.4ColumnswL2PortInfoTyperead-onlycurrentThis object indicates the connector type of this port.
1.3.6.1.4.1.171.11.105.3.2.3.1.1.5ColumnswL2PortInfoLinkStatusread-onlycurrentThis object indicates the port link status.
1.3.6.1.4.1.171.11.105.3.2.3.1.1.6ColumnswL2PortInfoNwayStatusread-onlycurrentThis object indicates the port speed and duplex mode.
1.3.6.1.4.1.171.11.105.3.2.3.1.1.8ColumnswL2PortInfoErrorDisabledread-onlycurrentThis object indicates the blocking type of this port.
1.3.6.1.4.1.171.11.105.3.2.3.2TableswL2PortCtrlTablenot-accessiblecurrentA table that contains control information about every port.
1.3.6.1.4.1.171.11.105.3.2.3.2.1RowswL2PortCtrlEntrynot-accessiblecurrentA list of control information for each port on the device.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.1ColumnswL2PortCtrlPortIndexread-onlycurrentThis object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.105.3.2.3.2.1.2ColumnswL2PortCtrlMediumTyperead-onlycurrentIndicates the medium type of the port number.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.3ColumnswL2PortCtrlUnitIndexread-onlycurrentIndicates the ID of the unit in the device
1.3.6.1.4.1.171.11.105.3.2.3.2.1.4ColumnswL2PortCtrlAdminStateread-writecurrentThis object decides if the port is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.5ColumnswL2PortCtrlNwayStateread-writecurrentChose the port speed, duplex mode, and N-Way function mode.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.6ColumnswL2PortCtrlFlowCtrlStateread-writecurrentThe flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo…
1.3.6.1.4.1.171.11.105.3.2.3.2.1.7ColumnswL2PortCtrlLearningStateread-writecurrentThis object decides if the port is locked or not.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.8ColumnswL2PortCtrlMACNotifyStateread-writecurrentThis object sets each port's MAC notification state.
1.3.6.1.4.1.171.11.105.3.2.3.2.1.10ColumnswL2PortCtrlMDIXStateread-writecurrentThis object configures the MDIX setting of the port.
1.3.6.1.4.1.171.11.105.3.2.3.3ScalarswL2PortCtrlJumboFrameread-writecurrentThis object configures the switch's jumbo frame settings.
1.3.6.1.4.1.171.11.105.3.2.3.4ScalarswL2PortCtrlJumboFrameMaxSizeread-onlycurrentThis object describes how many bytes the max jumbo frame is.
1.3.6.1.4.1.171.11.105.3.2.3.5TableswL2PortCableDiagnosisTablenot-accessiblecurrentA table that contains cable diagnostic information about every port.
1.3.6.1.4.1.171.11.105.3.2.3.5.1RowswL2PortCableDiagnosisEntrynot-accessiblecurrentA list of cable diagnostic information for each port of the device.
1.3.6.1.4.1.171.11.105.3.2.3.5.1.1ColumnswL2PortCableDiagnosisPortIndexread-onlycurrentThis object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.105.3.2.3.5.1.2ColumnswL2PortCableDiagnosisPairIndexread-onlycurrentIndicates pair index of the port. The pair 1 means the pin 3 and 6 of the connector. The pair 2 means the pin 1 and 2 of the connector. The pair 3 means the pi…
1.3.6.1.4.1.171.11.105.3.2.3.5.1.3ColumnswL2PortCableDiagnosisCableStatusread-onlycurrentThis object indicates the cable status.
1.3.6.1.4.1.171.11.105.3.2.3.5.1.4ColumnswL2PortCableDiagnosisPairStatusread-onlycurrentThis object indicates the status of the pair.
1.3.6.1.4.1.171.11.105.3.2.3.5.1.5ColumnswL2PortCableDiagnosisPairLengthread-onlycurrentThis object indicates the approx. length or length to failure of the pair. The unit value is in meters.
1.3.6.1.4.1.171.11.105.3.2.3.5.1.6ColumnswL2PortCableDiagnosisPairLengthInaccuracyread-onlycurrentThis object indicates the inaccuracy of a pair length. The unit value is in meters.
1.3.6.1.4.1.171.11.105.3.2.3.6TableswL2PortCounterCtrlTablenot-accessiblecurrentA table that used to clear counter information about every port.
1.3.6.1.4.1.171.11.105.3.2.3.6.1RowswL2PortCounterCtrlEntrynot-accessiblecurrentA list of entry used to clear counter information for each port of the device.
1.3.6.1.4.1.171.11.105.3.2.3.6.1.1ColumnswL2PortCounterCtrlPortIndexread-onlycurrentThis object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.105.3.2.3.6.1.2ColumnswL2PortCounterClearCtrlread-writecurrentThis object indicates if to clear the counters for each port of the device or not.
1.3.6.1.4.1.171.11.105.3.2.3.7TableswL2PortErrTablenot-accessiblecurrentA table that contains error information for each port.
1.3.6.1.4.1.171.11.105.3.2.3.7.1RowswL2PortErrEntrynot-accessiblecurrentA list of information regarding port errors on the device.
1.3.6.1.4.1.171.11.105.3.2.3.7.1.1ColumnswL2PortErrPortIndexread-onlycurrentThis object indicates the module's port number.(1..Max port number in the module).
1.3.6.1.4.1.171.11.105.3.2.3.7.1.2ColumnswL2PortErrPortStateread-onlycurrentThis object indicates the port state is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.3.7.1.3ColumnswL2PortErrPortConnStatusread-onlycurrentThis object indicates whether the PortStatus is err-disabled or not.
1.3.6.1.4.1.171.11.105.3.2.3.7.1.4ColumnswL2PortErrPortReasonread-onlycurrentThis object describes if the reason for the port error is STP LBD or Storm control.
1.3.6.1.4.1.171.11.105.3.2.5NodeswL2LimitedMulticastMgmt
1.3.6.1.4.1.171.11.105.3.2.5.1TableswL2MulticastFilterProfileTablenot-accessiblecurrentA table that contains information about multicast filter address.
1.3.6.1.4.1.171.11.105.3.2.5.1.1RowswL2MulticastFilterProfileEntrynot-accessiblecurrentA list of multicast filter address information for each profile ID.
1.3.6.1.4.1.171.11.105.3.2.5.1.1.1ColumnswL2MulticastFilterProfileIndexread-onlycurrentIndicates index for each profile.
1.3.6.1.4.1.171.11.105.3.2.5.1.1.2ColumnswL2MulticastFilterProfileNameread-createcurrentSpecifies a profile name for each multicast filter profile.
1.3.6.1.4.1.171.11.105.3.2.5.1.1.3ColumnswL2MulticastFilterStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.171.11.105.3.2.5.2TableswL2MulticastFilterProfileAddressTablenot-accessiblecurrentA table that contains information about multicast filter address.
1.3.6.1.4.1.171.11.105.3.2.5.2.1RowswL2MulticastFilterProfileAddressEntrynot-accessiblecurrentA list of multicast filter address information for each profile ID.
1.3.6.1.4.1.171.11.105.3.2.5.2.1.1ColumnswL2MulticastFilterProfileIdIndexread-onlycurrentIndicates index for each profile.
1.3.6.1.4.1.171.11.105.3.2.5.2.1.2ColumnswL2MulticastFilterFromIpread-onlycurrentSpecifies the head IP address of a multicast address range which will be binded to a multicast filter profile.
1.3.6.1.4.1.171.11.105.3.2.5.2.1.3ColumnswL2MulticastFilterToIpread-onlycurrentSpecifies the tail IP address of a multicast address range which will be binded to a multicast filter profile.
1.3.6.1.4.1.171.11.105.3.2.5.2.1.4ColumnswL2MulticastFilterAddressStateread-createcurrentThis object indicates the status of this entry. Setting value to createAndGo(4) will add the multicast address list specified in swL2MulticastFilterFromIp and …
1.3.6.1.4.1.171.11.105.3.2.5.3TableswL2LimitedMulticastFilterPortTablenot-accessiblecurrentA table that used to bind port to profile id.
1.3.6.1.4.1.171.11.105.3.2.5.3.1RowswL2LimitedMulticastFilterPortEntrynot-accessiblecurrentA list of information that used to bind port to profile id.
1.3.6.1.4.1.171.11.105.3.2.5.3.1.1ColumnswL2LimitedMulticastFilterPortIndexread-onlycurrentSpecifies port as an index.
1.3.6.1.4.1.171.11.105.3.2.5.3.1.2ColumnswL2LimitedMulticastFilterPortAccessread-writecurrentThis object indicates the access status for each port.
1.3.6.1.4.1.171.11.105.3.2.5.3.1.3ColumnswL2LimitedMulticastFilterPortProfileIDread-writecurrentThis object specifies a profile ID list for each port.
1.3.6.1.4.1.171.11.105.3.2.5.3.1.4ColumnswL2LimitedMulticastFilterPortProfileStatusread-createcurrentControls the multicast filter profile list which bind to each port. When set add(2), multicast filter profile ID list which specifies in swL2LimitedMulticastFi…
1.3.6.1.4.1.171.11.105.3.2.5.4TableswL2MulticastFilterPortMaxGroupTablenot-accessiblecurrentA table that contains information about max group number based on port.
1.3.6.1.4.1.171.11.105.3.2.5.4.1RowswL2MulticastFilterPortMaxGroupEntrynot-accessiblecurrentA list of max group number information for each port.
1.3.6.1.4.1.171.11.105.3.2.5.4.1.1ColumnswL2MulticastFilterPortMaxGroupPortIndexread-onlycurrentSpecifies port number as table index.
1.3.6.1.4.1.171.11.105.3.2.5.4.1.2ColumnswL2MulticastFilterPortMaxGroupread-writecurrentSpecifies maximum multicast filter group numbers for each port. Default value is 0,and 0 means infinite.
1.3.6.1.4.1.171.11.105.3.2.6NodeswL2QOSMgmt
1.3.6.1.4.1.171.11.105.3.2.6.1TableswL2QOSBandwidthControlTablenot-accessiblecurrent.
1.3.6.1.4.1.171.11.105.3.2.6.1.1RowswL2QOSBandwidthControlEntrynot-accessiblecurrentA list of information contained in the swL2QOSBandwidthControlTable.
1.3.6.1.4.1.171.11.105.3.2.6.1.1.1ColumnswL2QOSBandwidthPortIndexread-onlycurrentIndicates the port .
1.3.6.1.4.1.171.11.105.3.2.6.1.1.2ColumnswL2QOSBandwidthRxRateread-writecurrentIndicates RX Rate of the specified port. Value 1024001 means no limit.
1.3.6.1.4.1.171.11.105.3.2.6.1.1.3ColumnswL2QOSBandwidthTxRateread-writecurrentIndicates TX Rate of the specified port. Value 1024001 means no limit.
1.3.6.1.4.1.171.11.105.3.2.6.1.1.4ColumnswL2QOSBandwidthRadiusRxRateread-onlycurrentThe RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate.
1.3.6.1.4.1.171.11.105.3.2.6.1.1.5ColumnswL2QOSBandwidthRadiusTxRateread-onlycurrentThe TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate.
1.3.6.1.4.1.171.11.105.3.2.6.2TableswL2QOSSchedulingTablenot-accessiblecurrent.
1.3.6.1.4.1.171.11.105.3.2.6.2.1RowswL2QOSSchedulingEntrynot-accessiblecurrentA list of information contained in the swL2QOSSchedulingTable.
1.3.6.1.4.1.171.11.105.3.2.6.2.1.1ColumnswL2QOSSchedulingClassIndexread-onlycurrentIndicates the hardware queue number.
1.3.6.1.4.1.171.11.105.3.2.6.2.1.2ColumnswL2QOSSchedulingMaxPktsread-writecurrentIndicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its …
1.3.6.1.4.1.171.11.105.3.2.6.2.1.3ColumnswL2QOSSchedulingMechanismread-onlycurrentIndicates the mechanism of QoS scheduling.
1.3.6.1.4.1.171.11.105.3.2.6.2.1.4ColumnswL2QOSSchedulingMaxLatencyread-writecurrentIndicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin tr…
1.3.6.1.4.1.171.11.105.3.2.6.3TableswL2QOS8021pUserPriorityTablenot-accessiblecurrent.
1.3.6.1.4.1.171.11.105.3.2.6.3.1RowswL2QOS8021pUserPriorityEntrynot-accessiblecurrentA list of information contained in the swL2QOS8021pUserPriorityTable.
1.3.6.1.4.1.171.11.105.3.2.6.3.1.1ColumnswL2QOS8021pUserPriorityIndexread-onlycurrentThe 802.1p user priority .
1.3.6.1.4.1.171.11.105.3.2.6.3.1.2ColumnswL2QOS8021pUserPriorityClassread-writecurrentThe number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) …
1.3.6.1.4.1.171.11.105.3.2.6.4TableswL2QOS8021pDefaultPriorityTablenot-accessiblecurrent.
1.3.6.1.4.1.171.11.105.3.2.6.4.1RowswL2QOS8021pDefaultPriorityEntrynot-accessiblecurrentA list of information contained in the swL2QOS8021pDefaultPriorityTable.
1.3.6.1.4.1.171.11.105.3.2.6.4.1.1ColumnswL2QOS8021pDefaultPriorityIndexread-onlycurrentIndicates the port number .
1.3.6.1.4.1.171.11.105.3.2.6.4.1.2ColumnswL2QOS8021pDefaultPriorityread-writecurrentThe priority value to assign to untagged packets received by the switch ports on the switch..
1.3.6.1.4.1.171.11.105.3.2.6.4.1.3ColumnswL2QOS8021pRadiusPriorityread-onlycurrentThe value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
1.3.6.1.4.1.171.11.105.3.2.6.5ScalarswL2QOSSchedulingMechanismCtrlread-writecurrentThis object controls QoS scheduling Mechanism.
1.3.6.1.4.1.171.11.105.3.2.6.6ScalarswL2QOSHolPreventionCtrlread-writecurrentControls QoS HoL Prevention
1.3.6.1.4.1.171.11.105.3.2.7NodeswL2PortSecurityMgmt
1.3.6.1.4.1.171.11.105.3.2.7.1TableswL2PortSecurityControlTablenot-accessiblecurrentA port security feature which controls the address leaning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function.…
1.3.6.1.4.1.171.11.105.3.2.7.1.1RowswL2PortSecurityControlEntrynot-accessiblecurrentA list of information contained in the swL2PortSecurityControlTable.
1.3.6.1.4.1.171.11.105.3.2.7.1.1.1ColumnswL2PortSecurityPortIndexread-onlycurrentIndicates the secured port to lock address learning.
1.3.6.1.4.1.171.11.105.3.2.7.1.1.2ColumnswL2PortSecurityMaxLernAddrread-writecurrentIndicates allowable number of addresses to be learned on this port.
1.3.6.1.4.1.171.11.105.3.2.7.1.1.3ColumnswL2PortSecurityModeread-writecurrentIndicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the …
1.3.6.1.4.1.171.11.105.3.2.7.1.1.4ColumnswL2PortSecurityAdmStateread-writecurrentIndicates administration state of locking address.
1.3.6.1.4.1.171.11.105.3.2.7.1.1.5ColumnswL2PortSecurityEntryClearCtrlread-writecurrentUsed to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'.
1.3.6.1.4.1.171.11.105.3.2.7.2NodeswL2PortSecurityDelCtrl
1.3.6.1.4.1.171.11.105.3.2.7.2.1ScalarswL2PortSecurityDelVlanNameread-writecurrentIndicates VLAN name.
1.3.6.1.4.1.171.11.105.3.2.7.2.2ScalarswL2PortSecurityDelPortread-writecurrentIndicates the port.
1.3.6.1.4.1.171.11.105.3.2.7.2.3ScalarswL2PortSecurityDelMacAddressread-writecurrentSpecifies a MAC address.
1.3.6.1.4.1.171.11.105.3.2.7.2.4ScalarswL2PortSecurityDelActivityread-writecurrent.
1.3.6.1.4.1.171.11.105.3.2.7.3ScalarswL2PortSecurityTrapLogStateread-writecurrentWhen enabled(2),whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant informati…
1.3.6.1.4.1.171.11.105.3.2.8NodeswL2DhcpRelayMgmt
1.3.6.1.4.1.171.11.105.3.2.8.1ScalarswL2DhcpRelayStateread-writecurrentThis object indicates if the DHCP relay function is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.8.2ScalarswL2DhcpRelayHopCountread-writecurrentThis object indicates the maximum number of router hops that DHCP packets can cross.
1.3.6.1.4.1.171.11.105.3.2.8.3ScalarswL2DhcpRelayTimeThresholdread-writecurrentThis object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP …
1.3.6.1.4.1.171.11.105.3.2.8.4ScalarswL2DhcpRelayOption82Stateread-writecurrentThis object indicates if the DHCP relay agent information option 82 function is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.8.5ScalarswL2DhcpRelayOption82Checkread-writecurrentThis object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.8.6ScalarswL2DhcpRelayOption82Policyread-writecurrentThis object indicates the reforwarding policy of DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) …
1.3.6.1.4.1.171.11.105.3.2.8.7TableswL2DhcpRelayCtrlTablenot-accessiblecurrentThis table specifies the IP address as a destination to forward (relay) DHCP packets to.
1.3.6.1.4.1.171.11.105.3.2.8.7.1RowswL2DhcpRelayCtrlEntrynot-accessiblecurrentA list of information that specifies the IP address as a destination to forward (relay) DHCP packets to.
1.3.6.1.4.1.171.11.105.3.2.8.7.1.1ColumnswL2DhcpRelayCtrlInterfaceNameread-onlycurrentThe name of the IP interface.
1.3.6.1.4.1.171.11.105.3.2.8.7.1.2ColumnswL2DhcpRelayCtrlServerread-onlycurrentThe DHCP server IP address.
1.3.6.1.4.1.171.11.105.3.2.8.7.1.3ColumnswL2DhcpRelayCtrlStateread-writecurrentThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e…
1.3.6.1.4.1.171.11.105.3.2.9NodeswL2TrunkMgmt
1.3.6.1.4.1.171.11.105.3.2.9.1ScalarswL2TrunkMaxSupportedEntriesread-onlycurrentMaximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
1.3.6.1.4.1.171.11.105.3.2.9.2ScalarswL2TrunkCurrentNumEntriesread-onlycurrentCurrent active number of entries in the trunk configuration table.
1.3.6.1.4.1.171.11.105.3.2.9.3TableswL2TrunkCtrlTablenot-accessiblecurrentThis table specifies which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.105.3.2.9.3.1RowswL2TrunkCtrlEntrynot-accessiblecurrentA list of information that specifies which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.105.3.2.9.3.1.1ColumnswL2TrunkIndexread-onlycurrentThe index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.
1.3.6.1.4.1.171.11.105.3.2.9.3.1.3ColumnswL2TrunkMasterPortread-createcurrentThe object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master…
1.3.6.1.4.1.171.11.105.3.2.9.3.1.4ColumnswL2TrunkMemberread-createcurrentIndicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for …
1.3.6.1.4.1.171.11.105.3.2.9.3.1.5ColumnswL2TrunkFloodingPortread-onlycurrentThe object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.
1.3.6.1.4.1.171.11.105.3.2.9.3.1.6ColumnswL2TrunkTyperead-createcurrentThis object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group .
1.3.6.1.4.1.171.11.105.3.2.9.3.1.7ColumnswL2TrunkStateread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.171.11.105.3.2.9.4ScalarswL2TrunkAlgorithmread-writecurrentThis object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
1.3.6.1.4.1.171.11.105.3.2.9.5TableswL2TrunkLACPPortTablenot-accessiblecurrentThis table specifies which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.105.3.2.9.5.1RowswL2TrunkLACPPortEntrynot-accessiblecurrentA list of information specifies which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.105.3.2.9.5.1.1ColumnswL2TrunkLACPPortIndexread-onlycurrentThe index of logical port LACP.
1.3.6.1.4.1.171.11.105.3.2.9.5.1.2ColumnswL2TrunkLACPPortStateread-writecurrentThe state of logical port LACP.
1.3.6.1.4.1.171.11.105.3.2.9.6TableswL2TrunkVLANTablenot-accessiblecurrentThis table is used to manage the VLAN trunking feature of the device.
1.3.6.1.4.1.171.11.105.3.2.9.6.1RowswL2TrunkVLANEntrynot-accessiblecurrentThis object is used to configure the VLAN trunking settings for each port.
1.3.6.1.4.1.171.11.105.3.2.9.6.1.1ColumnswL2TrunkVLANPortread-onlycurrentThis object indicates the port being configured.
1.3.6.1.4.1.171.11.105.3.2.9.6.1.2ColumnswL2TrunkVLANStateread-writecurrentThe state of the logical port.
1.3.6.1.4.1.171.11.105.3.2.10NodeswL2MirrorMgmt
1.3.6.1.4.1.171.11.105.3.2.10.1ScalarswL2MirrorLogicTargetPortread-writecurrentThis object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the seq…
1.3.6.1.4.1.171.11.105.3.2.10.2ScalarswL2MirrorPortSourceIngressread-writecurrentThis represents the port where ingress packets will be sniffed.
1.3.6.1.4.1.171.11.105.3.2.10.3ScalarswL2MirrorPortSourceEgressread-writecurrentThis represents the port where egress packets will be sniffed.
1.3.6.1.4.1.171.11.105.3.2.10.4ScalarswL2MirrorPortStateread-writecurrentThis object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e…
1.3.6.1.4.1.171.11.105.3.2.11NodeswL2IGMPMgmt
1.3.6.1.4.1.171.11.105.3.2.11.1ScalarswL2IGMPMaxSupportedVlansread-onlycurrentMaximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
1.3.6.1.4.1.171.11.105.3.2.11.2ScalarswL2IGMPMaxIpGroupNumPerVlanread-onlycurrentMaximum number of multicast IP groups per VLAN in the layer 2 IGMP information table(swL2IGMPQueryInfoTable).
1.3.6.1.4.1.171.11.105.3.2.11.3ScalarswL2IGMPSnoopingMulticastVlanStateread-writecurrentIt indicates the global state of igmp_snoop multicast_vlan.
1.3.6.1.4.1.171.11.105.3.2.11.4TableswL2IGMPCtrlTablenot-accessiblecurrentThe table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry…
1.3.6.1.4.1.171.11.105.3.2.11.4.1RowswL2IGMPCtrlEntrynot-accessiblecurrentThe entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.1ColumnswL2IGMPCtrlVidread-onlycurrentThis object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is …
1.3.6.1.4.1.171.11.105.3.2.11.4.1.2ColumnswL2IGMPQueryIntervalread-writecurrentThe frequency at which IGMP Host-Query packets are transmitted on this switch.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.3ColumnswL2IGMPMaxResponseTimeread-writecurrentThe maximum query response time on this switch.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.4ColumnswL2IGMPRobustnessread-writecurrentThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. …
1.3.6.1.4.1.171.11.105.3.2.11.4.1.5ColumnswL2IGMPLastMemberQueryIntervalread-writecurrentThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o…
1.3.6.1.4.1.171.11.105.3.2.11.4.1.6ColumnswL2IGMPHostTimeoutread-writecurrentThe timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to…
1.3.6.1.4.1.171.11.105.3.2.11.4.1.7ColumnswL2IGMPRouteTimeoutread-writecurrentThe Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.8ColumnswL2IGMPLeaveTimerread-writecurrentWhen a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeav…
1.3.6.1.4.1.171.11.105.3.2.11.4.1.9ColumnswL2IGMPQueryStateread-writecurrentThis object decides if the IGMP query is enabled or disabled.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.10ColumnswL2IGMPCurrentStateread-onlycurrentThis object indicates the current IGMP query state.
1.3.6.1.4.1.171.11.105.3.2.11.4.1.11ColumnswL2IGMPCtrlStateread-writecurrentThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e…
1.3.6.1.4.1.171.11.105.3.2.11.4.1.12ColumnswL2IGMPFastLeaveStateread-writecurrentThis object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are diffe…
1.3.6.1.4.1.171.11.105.3.2.11.5TableswL2IGMPQueryInfoTablenot-accessiblecurrentThe table contains the number current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
1.3.6.1.4.1.171.11.105.3.2.11.5.1RowswL2IGMPQueryInfoEntrynot-accessiblecurrentInformation about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entry are all enabled.
1.3.6.1.4.1.171.11.105.3.2.11.5.1.1ColumnswL2IGMPInfoVidread-onlycurrentThis object indicates the VID of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
1.3.6.1.4.1.171.11.105.3.2.11.5.1.2ColumnswL2IGMPInfoQueryCountread-onlycurrentThis object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis.
1.3.6.1.4.1.171.11.105.3.2.11.5.1.3ColumnswL2IGMPInfoTxQueryCountread-onlycurrentThis object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to relate…
1.3.6.1.4.1.171.11.105.3.2.11.6TableswL2IGMPInfoTablenot-accessiblecurrentThe table containing current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of the associated …
1.3.6.1.4.1.171.11.105.3.2.11.6.1RowswL2IGMPInfoEntrynot-accessiblecurrentInformation about current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and the swL2IGMPCtrlState of associated…
1.3.6.1.4.1.171.11.105.3.2.11.6.1.1ColumnswL2IGMPVidread-onlycurrentThis object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network.
1.3.6.1.4.1.171.11.105.3.2.11.6.1.2ColumnswL2IGMPGroupIpAddrread-onlycurrentThis object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis.
1.3.6.1.4.1.171.11.105.3.2.11.6.1.3ColumnswL2IGMPMacAddrread-onlycurrentThis object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on per-VLAN basis.
1.3.6.1.4.1.171.11.105.3.2.11.6.1.4ColumnswL2IGMPPortMapread-onlycurrentThis object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a por…
1.3.6.1.4.1.171.11.105.3.2.11.6.1.5ColumnswL2IGMPIpGroupReportCountread-onlycurrentThis object indicates how many report packets were receive by our device, that correspond with this entry when the IGMP function is enabled on per-VLAN basis.
1.3.6.1.4.1.171.11.105.3.2.11.7TableswL2IGMPRouterPortTablenot-accessiblecurrentThe information of the router port table.
1.3.6.1.4.1.171.11.105.3.2.11.7.1RowswL2IGMPRouterPortEntrynot-accessiblecurrentThe entry of swL2IGMPRouterPortTable.
1.3.6.1.4.1.171.11.105.3.2.11.7.1.1ColumnswL2IGMPRouterPortVlanidread-onlycurrentThis object indicates the VLAN ID of the router port entry.
1.3.6.1.4.1.171.11.105.3.2.11.7.1.2ColumnswL2IGMPRouterPortVlanNameread-onlycurrentThis object indicates the VLAN name of the router port entry.
1.3.6.1.4.1.171.11.105.3.2.11.7.1.3ColumnswL2IGMPRouterPortStaticPortListread-writecurrentThis object indicates the static portlist of the router port entry.
1.3.6.1.4.1.171.11.105.3.2.11.7.1.4ColumnswL2IGMPRouterPortDynamicPortListread-onlycurrentThis object indicates the dynamic portlist of the router port entry.
1.3.6.1.4.1.171.11.105.3.2.11.7.1.5ColumnswL2IGMPRouterPortForbiddenPortListread-writecurrentThis object indicates the forbidden portlist of the router port entry.
1.3.6.1.4.1.171.11.105.3.2.11.8TableswL2IGMPMulticastVlanTablenot-accessiblecurrentThe information of the IGMP snooping multicast VLAN table.
1.3.6.1.4.1.171.11.105.3.2.11.8.1RowswL2IGMPMulticastVlanEntrynot-accessiblecurrentThe entry of swL2IGMPMulticastVlanTable.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.1ColumnswL2IGMPMulticastVlanidread-onlycurrentThis object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.2ColumnswL2IGMPMulticastVlanNameread-createcurrentThis object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.3ColumnswL2IGMPMulticastVlanSourcePortread-writecurrentThis object indicate the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry. And the IGM…
1.3.6.1.4.1.171.11.105.3.2.11.8.1.4ColumnswL2IGMPMulticastVlanMemberPortread-writecurrentThis object indicate the portlist of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry. An…
1.3.6.1.4.1.171.11.105.3.2.11.8.1.5ColumnswL2IGMPMulticastVlanTagMemberPortread-writecurrentThis object indicate the portlist of the tag member ports of IGMP snooping multicast VLAN.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.6ColumnswL2IGMPMulticastVlanStateread-writecurrentThis object can be enabled or disabled IGMP_snooping multicast VLAN.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.7ColumnswL2IGMPMulticastVlanReplaceSourceIpread-writecurrentThe replace source IP of this multicast vlan.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.8ColumnswL2IGMPMulticastVlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.171.11.105.3.2.11.8.1.9ColumnswL2IGMPMulticastVlanRemoveAllMcastAddrListActionread-writecurrentThis object indicates if remove all the multicast address list from the IGMP multicast VLAN or not.
1.3.6.1.4.1.171.11.105.3.2.11.9TableswL2IGMPMulticastVlanGroupTablenot-accessiblecurrentThe table containing the IGMP snooping multicast VLAN group information
1.3.6.1.4.1.171.11.105.3.2.11.9.1RowswL2IGMPMulticastVlanGroupEntrynot-accessiblecurrentInformation about current IGMP snooping multicast VLAN group.
1.3.6.1.4.1.171.11.105.3.2.11.9.1.1ColumnswL2IGMPMulticastVlanGroupVidread-onlycurrentThis object indicates the Vid of IGMP snooping multicast VLAN group.
1.3.6.1.4.1.171.11.105.3.2.11.9.1.2ColumnswL2IGMPMulticastVlanGroupFromIpread-onlycurrentSpecifies the multicast address list for this VLAN.
1.3.6.1.4.1.171.11.105.3.2.11.9.1.3ColumnswL2IGMPMulticastVlanGroupToIpread-onlycurrentSpecifies the multicast address list for this VLAN.
1.3.6.1.4.1.171.11.105.3.2.11.9.1.4ColumnswL2IGMPMulticastVlanGroupStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.171.11.105.3.2.11.13TableswL2IGMPAccessAuthTablenot-accessiblecurrentThis table is used to manage the IGMP Access Authentication configurations of the device.
1.3.6.1.4.1.171.11.105.3.2.11.13.1RowswL2IGMPAccessAuthEntrynot-accessiblecurrentA list of manageable entities for IGMP Access Authentication. The configuration is done per port.
1.3.6.1.4.1.171.11.105.3.2.11.13.1.1ColumnswL2IGMPAccessAuthPortread-onlycurrentThe index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
1.3.6.1.4.1.171.11.105.3.2.11.13.1.2ColumnswL2IGMPAccessAuthStateread-writecurrentThis object denotes the status of IGMP Access Authentication of the port.
1.3.6.1.4.1.171.11.105.3.2.14NodeswL2TrafficSegMgmt
1.3.6.1.4.1.171.11.105.3.2.14.1TableswL2TrafficSegTablenot-accessiblecurrentThis table specifies that the port can just forward traffic to the specific port list.
1.3.6.1.4.1.171.11.105.3.2.14.1.1RowswL2TrafficSegEntrynot-accessiblecurrentA list of information which specifies the port with its traffic forwarding list.
1.3.6.1.4.1.171.11.105.3.2.14.1.1.1ColumnswL2TrafficSegPortread-onlycurrentThe port number of the logical port.
1.3.6.1.4.1.171.11.105.3.2.14.1.1.2ColumnswL2TrafficSegForwardPortsread-writecurrentThe port list to which the specific port can forward traffic.
1.3.6.1.4.1.171.11.105.3.2.17NodeswL2MulticastFilterMode
1.3.6.1.4.1.171.11.105.3.2.17.1TableswL2MulticastFilterModeVlanTablenot-accessiblecurrentA table that contains information about VLAN multicast filter mode.
1.3.6.1.4.1.171.11.105.3.2.17.1.1RowswL2MulticastFilterModeVlanEntrynot-accessiblecurrentA list of multicast filter mode information for each VLAN.
1.3.6.1.4.1.171.11.105.3.2.17.1.1.1ColumnswL2MulticastFilterVidread-onlycurrentIndicates VID for each VLAN.
1.3.6.1.4.1.171.11.105.3.2.17.1.1.2ColumnswL2MulticastFilterVlanModeread-writecurrentSpecifies multicast filter mode for each VLAN.
1.3.6.1.4.1.171.11.105.3.2.18NodeswL2LoopDetectMgmt
1.3.6.1.4.1.171.11.105.3.2.18.1NodeswL2LoopDetectCtrl
1.3.6.1.4.1.171.11.105.3.2.18.1.1ScalarswL2LoopDetectAdminStateread-writecurrentThis object indicates the loopback detection status for the system.
1.3.6.1.4.1.171.11.105.3.2.18.1.2ScalarswL2LoopDetectIntervalread-writecurrentThis object indicates the interval value, the range is from 1 to 32767 seconds.
1.3.6.1.4.1.171.11.105.3.2.18.1.3ScalarswL2LoopDetectRecoverTimeread-writecurrentThis object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
1.3.6.1.4.1.171.11.105.3.2.18.1.4ScalarswL2LoopDetectModeread-writecurrentThis object indicates the loopback detection mode for the system.
1.3.6.1.4.1.171.11.105.3.2.18.1.5ScalarswL2LoopDetectTrapModeread-writecurrentThis object indicates the loopback detection trap mode for the system.
1.3.6.1.4.1.171.11.105.3.2.18.2NodeswL2LoopDetectPortMgmt
1.3.6.1.4.1.171.11.105.3.2.18.2.1TableswL2LoopDetectPortTablenot-accessiblecurrentThe table specifies the loopback detection function specified by port.
1.3.6.1.4.1.171.11.105.3.2.18.2.1.1RowswL2LoopDetectPortEntrynot-accessiblecurrentThe table specifies the loopback detection function specified by port.
1.3.6.1.4.1.171.11.105.3.2.18.2.1.1.1ColumnswL2LoopDetectPortIndexread-onlycurrentThis object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
1.3.6.1.4.1.171.11.105.3.2.18.2.1.1.2ColumnswL2LoopDetectPortStateread-writecurrentThis object indicates the loopback detection function state on the port.
1.3.6.1.4.1.171.11.105.3.2.18.2.1.1.3ColumnswL2LoopDetectPortLoopVLANread-onlycurrentThis object indicates the VLAN list that has detected a loopback.
1.3.6.1.4.1.171.11.105.3.2.18.2.1.1.4ColumnswL2LoopDetectPortLoopStatusread-onlycurrentThis object indicates the port status.
1.3.6.1.4.1.171.11.105.3.2.24NodeswL2DhcpLocalRelayMgmt
1.3.6.1.4.1.171.11.105.3.2.24.1ScalarswL2DhcpLocalRelayStateread-writecurrentThis object indicates the status of the DHCP local relay function of the switch.
1.3.6.1.4.1.171.11.105.3.2.24.2TableswL2DhcpLocalRelayVLANTablenot-accessiblecurrentThis table is used to manage the DHCP local relay status for each VLAN.
1.3.6.1.4.1.171.11.105.3.2.24.2.1RowswL2DhcpLocalRelayVLANEntrynot-accessiblecurrentThis object lists the current VLANs in the switch and their corresponding DHCP local relay status.
1.3.6.1.4.1.171.11.105.3.2.24.2.1.1ColumnswL2DhcpLocalRelayVLANIDread-onlycurrentThis object shows the VIDs of the current VLANS in the switch.
1.3.6.1.4.1.171.11.105.3.2.24.2.1.2ColumnswL2DhcpLocalRelayVLANStateread-writecurrentThis object indicates the status of the DHCP relay function of the VLAN.
1.3.6.1.4.1.171.11.105.3.2.25NodeswL2PPPoEMgmt
1.3.6.1.4.1.171.11.105.3.2.25.1ScalarswL2PPPoECirIDinsertStateread-writecurrentThis object indicates the status of the PPPoE circuit ID insertion state of the switch.
1.3.6.1.4.1.171.11.105.3.2.100NodeswL2MgmtMIBTraps
1.3.6.1.4.1.171.11.105.3.2.100.1NodeswL2Notify
1.3.6.1.4.1.171.11.105.3.2.100.1.1NodeswL2NotifyMgmt
1.3.6.1.4.1.171.11.105.3.2.100.1.1.1ScalarswL2macNotificationSeverityread-writecurrentIndicate the level of macNotification detection.
1.3.6.1.4.1.171.11.105.3.2.100.1.1.2ScalarswL2PortSecurityViolationSeverityread-writecurrentIndicate the level of PortSecurityViolation detection.
1.3.6.1.4.1.171.11.105.3.2.100.1.2NodeswL2NotifyPrefix
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0NodeswL2NotifFirmware
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.1NotificationswL2macNotificationcurrentThis trap indicates the MAC addresses variation in address table .
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.2NotificationswL2PortSecurityViolationTrapcurrentWhen the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.3NotificationswL2PortLoopOccurredcurrentThe trap is sent when Port loop occurred.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.4NotificationswL2PortLoopRestartcurrentThe trap is sent when Port loop restart after interval time.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.5NotificationswL2VlanLoopOccurredcurrentThe trap is sent when Port with VID loop occurred.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.0.6NotificationswL2VlanLoopRestartcurrentThe trap is sent when Port with VID loop restart after interval time.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.1Nodeswl2NotificationBidings
1.3.6.1.4.1.171.11.105.3.2.100.1.2.1.1ScalarswL2macNotifyInforead-onlycurrentThis object indicates the last time reboot information.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.1.2ScalarswL2PortSecurityViolationMacaccessible-for-notifycurrentThis object indicates the MAC address that violates the port security configuration.
1.3.6.1.4.1.171.11.105.3.2.100.1.2.1.3ScalarswL2VlanLoopDetectVIDaccessible-for-notifycurrentThis object indicates the VID that has detected a loopback.
MIB Viewer