DES3852-L2MGMT-MIB
186 objects
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| SW3800PRIMGMT-MIB | des3852 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.69.4.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.11.69.4.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.69.4.2.1.1.1 | ScalarswDevInfoSystemUpTime | read-only | current | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then… |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.2 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.3 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.4 | ScalarswDevInfoConsoleInUse | read-only | current | The usage indication of the console system. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.5 | ScalarswDevInfoModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.6 | ScalarswDevInfoFrontPanelLedMode | read-only | current | This object indicates the mode of current device front panel LEDs . The front panel LED mode could be changed only by a push button on the device front panel .… |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.8 | TableswDevInfoPowerTable | not-accessible | current | A list of the temperature. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1 | RowswDevInfoPowerEntry | not-accessible | current | An entry for Power information. |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.1 | ColumnswDevInfoPowerUnitIndex | read-only | current | Indicates the ID of the unit in the System |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.2 | ColumnswDevInfoPowerID | read-only | current | Indicates ID of the power |
| 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.3 | ColumnswDevInfoPowerStatus | read-only | current | Indicates status of the power |
| 1.3.6.1.4.1.171.11.69.4.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.69.4.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.3 | ScalarswL2DevCtrlRmonState | read-write | current | This object can be enable or disable RMON. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.4 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.5 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.6 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.7 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of variation MAC in the address table. The default value is 1 . |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.8 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval in seconds for triggering the MAC notify message. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.10 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.69.4.2.1.2.10.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.69.4.2.1.2.10.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object can designate a TCP port. When Telnet is disabled this object isn't accessible. |
| 1.3.6.1.4.1.171.11.69.4.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.69.4.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.69.4.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the… |
| 1.3.6.1.4.1.171.11.69.4.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when a… |
| 1.3.6.1.4.1.171.11.69.4.2.3 | NodeswL2VlanMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.3.1 | TableswL2VlanAdvertisementTable | not-accessible | current | A table containing the advertisement state for each VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.171.11.69.4.2.3.1.1 | RowswL2VlanAdvertisementEntry | not-accessible | current | Advertisement state for each VLAN configured in the device. |
| 1.3.6.1.4.1.171.11.69.4.2.3.1.1.1 | ColumnswL2VlanIndex | read-only | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.69.4.2.3.1.1.2 | ColumnswL2VlanName | read-only | current | An administratively assigned string, which may be used to identify the VLAN. |
| 1.3.6.1.4.1.171.11.69.4.2.3.1.1.3 | ColumnswL2VlanAdvertiseState | read-write | current | This object indicates the advertised status of this VLAN entry. |
| 1.3.6.1.4.1.171.11.69.4.2.4 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.4.1 | TableswL2PortInfoTable | not-accessible | obsolete | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1 | RowswL2PortInfoEntry | not-accessible | obsolete | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | obsolete | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.2 | ColumnswL2PortInfoUnitIndex | read-only | obsolete | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.3 | ColumnswL2PortInfoType | read-only | obsolete | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.4 | ColumnswL2PortInfoLinkStatus | read-only | obsolete | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.5 | ColumnswL2PortInfoNwayStatus | read-only | obsolete | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.6 | ColumnswL2PortInfoModuleType | read-only | obsolete | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.1.1.7 | ColumnswL2PortInfoErrorDisabled | read-only | obsolete | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2 | TableswL2PortCtrlTable | not-accessible | obsolete | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1 | RowswL2PortCtrlEntry | not-accessible | obsolete | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | obsolete | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.2 | ColumnswL2PortCtrlUnitIndex | read-only | obsolete | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.3 | ColumnswL2PortCtrlAdminState | read-write | obsolete | This object decides whether the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.4 | ColumnswL2PortCtrlNwayState | read-write | obsolete | Choose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.5 | ColumnswL2PortCtrlFlowCtrlState | read-write | obsolete | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.6 | ColumnswL2PortCtrlLockState | read-write | obsolete | This object decides whether the port is locked or not. |
| 1.3.6.1.4.1.171.11.69.4.2.4.2.1.7 | ColumnswL2PortCtrlMACNotifyState | read-write | obsolete | This object decides whether MAC notification is enabled or not. |
| 1.3.6.1.4.1.171.11.69.4.2.4.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configure the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4 | TableswL2PortInformationTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1 | RowswL2PortInformationEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.1 | ColumnswL2PortInformationPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.2 | ColumnswL2PortInformationMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.3 | ColumnswL2PortInformationUnitID | read-only | current | Indicates ID of the unit in the system |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.4 | ColumnswL2PortInformationType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.5 | ColumnswL2PortInformationLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.6 | ColumnswL2PortInformationNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.7 | ColumnswL2PortInformationModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.4.1.8 | ColumnswL2PortInformationErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5 | TableswL2PortControlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1 | RowswL2PortControlEntry | not-accessible | current | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.1 | ColumnswL2PortControlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.2 | ColumnswL2PortControlMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.3 | ColumnswL2PortControlUnitIndex | read-only | current | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.4 | ColumnswL2PortControlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.5 | ColumnswL2PortControlNwayState | read-write | current | Choose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.6 | ColumnswL2PortControlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.7 | ColumnswL2PortControlLearningState | read-write | current | This object decides whether the port is locked or not. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.8 | ColumnswL2PortControlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.69.4.2.4.5.1.9 | ColumnswL2PortControlMulticastfilter | read-write | current | This object controls the multicast port filtering mode for a specified port. |
| 1.3.6.1.4.1.171.11.69.4.2.6 | NodeswL2QOSMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.6.1 | TableswL2QOSBandwidthControlTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1 | RowswL2QOSBandwidthControlEntry | not-accessible | current | A list of information contained in swL2QOSBandwidthControlTable. |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1.1 | ColumnswL2QOSBandwidthPortIndex | read-only | current | Indicates the port. |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1.2 | ColumnswL2QOSBandwidthRxRate | read-write | current | Indicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit. |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1.3 | ColumnswL2QOSBandwidthTxRate | read-write | current | Indicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit. |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1.4 | ColumnswL2QOSBandwidthRadiusRxRate | read-only | current | The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. |
| 1.3.6.1.4.1.171.11.69.4.2.6.1.1.5 | ColumnswL2QOSBandwidthRadiusTxRate | read-only | current | The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. |
| 1.3.6.1.4.1.171.11.69.4.2.6.2 | TableswL2QOSSchedulingTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.69.4.2.6.2.1 | RowswL2QOSSchedulingEntry | not-accessible | current | A list of information contained in swL2QOSSchedulingTable. |
| 1.3.6.1.4.1.171.11.69.4.2.6.2.1.1 | ColumnswL2QOSSchedulingClassIndex | read-only | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.11.69.4.2.6.2.1.2 | ColumnswL2QOSSchedulingMaxPkts | read-write | current | Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its … |
| 1.3.6.1.4.1.171.11.69.4.2.6.3 | TableswL2QOS8021pUserPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.69.4.2.6.3.1 | RowswL2QOS8021pUserPriorityEntry | not-accessible | current | A list of information contained in swL2QOS8021pUserPriorityTable. |
| 1.3.6.1.4.1.171.11.69.4.2.6.3.1.1 | ColumnswL2QOS8021pUserPriorityIndex | read-only | current | The 802.1p user priority . |
| 1.3.6.1.4.1.171.11.69.4.2.6.3.1.2 | ColumnswL2QOS8021pUserPriorityClass | read-write | current | The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) a… |
| 1.3.6.1.4.1.171.11.69.4.2.6.4 | TableswL2QOS8021pDefaultPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.69.4.2.6.4.1 | RowswL2QOS8021pDefaultPriorityEntry | not-accessible | current | A list of information contained in swL2QOS8021pDefaultPriorityTable. |
| 1.3.6.1.4.1.171.11.69.4.2.6.4.1.1 | ColumnswL2QOS8021pDefaultPriorityIndex | read-only | current | Indicates the port number. |
| 1.3.6.1.4.1.171.11.69.4.2.6.4.1.2 | ColumnswL2QOS8021pDefaultPriority | read-write | current | The priority value to assign to untagged packets received by the switch ports on the switch. |
| 1.3.6.1.4.1.171.11.69.4.2.6.4.1.3 | ColumnswL2QOS8021pRadiusPriority | read-only | current | Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. |
| 1.3.6.1.4.1.171.11.69.4.2.8 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.8.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.69.4.2.8.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index of logical port trunk. The trunk group number depends on the existence of the unit and module. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.2 | ColumnswL2TrunkName | read-create | current | The name of logical port trunk. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the maste… |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . |
| 1.3.6.1.4.1.171.11.69.4.2.8.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.69.4.2.8.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.69.4.2.9 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.9.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is … |
| 1.3.6.1.4.1.171.11.69.4.2.9.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the ingress of the source port packet to be sniffed. |
| 1.3.6.1.4.1.171.11.69.4.2.9.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the egress of the source port packet to be sniffed. |
| 1.3.6.1.4.1.171.11.69.4.2.9.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for ea… |
| 1.3.6.1.4.1.171.11.69.4.2.10 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.10.1 | ScalarswL2IGMPMaxSupportedVlans | read-only | current | Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable). |
| 1.3.6.1.4.1.171.11.69.4.2.10.3 | TableswL2IGMPCtrlTable | not-accessible | current | This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one … |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1 | RowswL2IGMPCtrlEntry | not-accessible | current | The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.1 | ColumnswL2IGMPCtrlVid | read-only | current | This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.2 | ColumnswL2IGMPQueryInterval | read-write | current | The frequency at which the IGMP Host-Query packets are transmitted on this switch. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.3 | ColumnswL2IGMPMaxResponseTime | read-write | current | The maximum query response time on this switch. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.4 | ColumnswL2IGMPRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be inc… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.5 | ColumnswL2IGMPLastMemberQueryInterval | read-write | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.6 | ColumnswL2IGMPHostTimeout | read-write | current | The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to sen… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.7 | ColumnswL2IGMPRouteTimeout | read-write | current | The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.8 | ColumnswL2IGMPLeaveTimer | read-write | current | When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveT… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.9 | ColumnswL2IGMPQueryState | read-write | current | This object decides if the IGMP query is enabled or disabled. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.10 | ColumnswL2IGMPCurrentState | read-only | current | This object indicates the current IGMP query state. |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.11 | ColumnswL2IGMPCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for ea… |
| 1.3.6.1.4.1.171.11.69.4.2.10.3.1.12 | ColumnswL2IGMPFastLeaveState | read-write | current | This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are diffe… |
| 1.3.6.1.4.1.171.11.69.4.2.10.4 | TableswL2IGMPQueryInfoTable | not-accessible | current | The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.171.11.69.4.2.10.4.1 | RowswL2IGMPQueryInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled. |
| 1.3.6.1.4.1.171.11.69.4.2.10.4.1.1 | ColumnswL2IGMPInfoVid | read-only | current | This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCt… |
| 1.3.6.1.4.1.171.11.69.4.2.10.4.1.2 | ColumnswL2IGMPInfoQueryCount | read-only | current | This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.69.4.2.10.4.1.3 | ColumnswL2IGMPInfoTxQueryCount | read-only | current | This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to … |
| 1.3.6.1.4.1.171.11.69.4.2.10.5 | TableswL2IGMPInfoTable | not-accessible | current | The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associate… |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1 | RowswL2IGMPInfoEntry | not-accessible | current | Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN en… |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1.1 | ColumnswL2IGMPVid | read-only | current | This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network. |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1.2 | ColumnswL2IGMPGroupIpAddr | read-only | current | This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1.3 | ColumnswL2IGMPMacAddr | read-only | current | This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1.4 | ColumnswL2IGMPPortMap | read-only | current | This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. … |
| 1.3.6.1.4.1.171.11.69.4.2.10.5.1.5 | ColumnswL2IGMPIpGroupReportCount | read-only | current | This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis. |
| 1.3.6.1.4.1.171.11.69.4.2.10.6 | TableswL2IGMPMulticastVlanTable | not-accessible | current | The information of the IGMP snooping multicast VLAN table. |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1 | RowswL2IGMPMulticastVlanEntry | not-accessible | current | The entry of swL2IGMPMulticastVlanTable. |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1.1 | ColumnswL2IGMPMulticastVlanid | read-only | current | This object indicates the VLAN id of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1.2 | ColumnswL2IGMPMulticastVlanName | read-create | current | This object indicates the VLAN name of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1.3 | ColumnswL2IGMPMulticastVlanSourcePort | read-create | current | This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGM… |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1.4 | ColumnswL2IGMPMulticastVlanMemberPort | read-create | current | This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the I… |
| 1.3.6.1.4.1.171.11.69.4.2.10.6.1.5 | ColumnswL2IGMPMulticastVlanRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7 | TableswL2IGMPRouterPortTable | not-accessible | current | The information of the router port table. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1 | RowswL2IGMPRouterPortEntry | not-accessible | current | The entry of swL2IGMPRouterPortTable. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1.1 | ColumnswL2IGMPRouterPortVlanid | read-only | current | This object indicates the VLAN id of the router port entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1.2 | ColumnswL2IGMPRouterPortVlanName | read-only | current | This object indicates the VLAN name of the router port entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1.3 | ColumnswL2IGMPRouterPortStaticPortList | read-write | current | This object indicates the static portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1.4 | ColumnswL2IGMPRouterPortDynamicPortList | read-only | current | This object indicates the dynamic portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.69.4.2.10.7.1.5 | ColumnswL2IGMPRouterPortForbiddenPortList | read-write | current | This object indicates the forbidden portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.69.4.2.13 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.13.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.69.4.2.13.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information specifying the port with its traffic forward list. |
| 1.3.6.1.4.1.171.11.69.4.2.13.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.69.4.2.13.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list that the specific port can forward traffic to. |
| 1.3.6.1.4.1.171.11.69.4.2.13.2 | NodeswL2BroadcastSegCtrl | |||
| 1.3.6.1.4.1.171.11.69.4.2.13.2.1 | ScalarswL2BroadcastSegFilterPorts | read-write | current | The port list that the specific port can filter broadcast packets from. |
| 1.3.6.1.4.1.171.11.69.4.2.13.2.2 | ScalarswL2BroadcastSegARPForwardPorts | read-write | current | The port list that the specific port can forward broadcast ARP packets to. |
| 1.3.6.1.4.1.171.11.69.4.2.14 | NodeswL2PortSecurityMgmt | |||
| 1.3.6.1.4.1.171.11.69.4.2.14.1 | TableswL2PortSecurityControlTable | not-accessible | current | The port security feature controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. W… |
| 1.3.6.1.4.1.171.11.69.4.2.14.1.1 | RowswL2PortSecurityControlEntry | not-accessible | current | A list of information contained in the swL2PortSecurityControlTable. |
| 1.3.6.1.4.1.171.11.69.4.2.14.1.1.1 | ColumnswL2PortSecurityPortIndex | read-only | current | Indicates the secured port to lock address learning. |
| 1.3.6.1.4.1.171.11.69.4.2.14.1.1.2 | ColumnswL2PortSecurityMaxLernAddr | read-write | current | Indicates allowable number of addresses to be learned at this port. |
| 1.3.6.1.4.1.171.11.69.4.2.14.1.1.3 | ColumnswL2PortSecurityMode | read-write | current | Indicates the mode of locking address. In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer has expired. In this mode, when … |
| 1.3.6.1.4.1.171.11.69.4.2.14.1.1.4 | ColumnswL2PortSecurityAdmState | read-write | current | Indicates the administration state of the locking address. |
| 1.3.6.1.4.1.171.11.69.4.2.14.2 | ScalarswL2PortSecurityTrapLogState | read-write | current | When enable (2) is selected, whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant inf… |
| 1.3.6.1.4.1.171.11.69.4.2.15 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.69.4.2.15.0 | NodeswL2MgmtMIBTrapPrefix | |||
| 1.3.6.1.4.1.171.11.69.4.2.15.0.3 | NotificationswL2macNotification | current | This trap indicate the MAC addresses variation in the address table . | |
| 1.3.6.1.4.1.171.11.69.4.2.15.0.4 | NotificationswL2porttypechgNotification | current | This trap indicates the port type change. | |
| 1.3.6.1.4.1.171.11.69.4.2.15.0.5 | NotificationswPowerStatusChg | current | Power Status change notification. | |
| 1.3.6.1.4.1.171.11.69.4.2.15.0.6 | NotificationswPowerFailure | current | Power Failure notification. | |
| 1.3.6.1.4.1.171.11.69.4.2.15.0.7 | NotificationswPowerRecover | current | Power Recover notification. | |
| 1.3.6.1.4.1.171.11.69.4.2.15.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.69.4.2.15.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates information about the last time the system rebooted. |
| 1.3.6.1.4.1.171.11.69.4.2.15.2 | Nodeswl2NotifyPortSecurity | |||
| 1.3.6.1.4.1.171.11.69.4.2.15.2.1 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violated the port security configuration. |
| 1.3.6.1.4.1.171.11.69.4.2.15.2.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out |