DES7200-AAA-MIB
98 objects
This module defines my AAA(802.1x) mibs.
Imported Objects
| DES7200-SMI | myMgmt |
| DES7200-TC | ConfigStatus IfIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| RFC1155-SMI | Counter |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.19 | IdentitymyAAAMIB | This module defines my AAA(802.1x) mibs. | ||
| 1.3.6.1.4.1.171.10.97.2.19.1 | NodemyAAAMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.1 | NodemyDot1xAuthObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.1.1 | ScalarmyDot1xAuthStatus | read-write | current | The enable(1)/disable(2) control used by the 802.1x global settings. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.2 | ScalarmyDot1xAuthObjectsQuietPeriod | read-write | current | The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.3 | ScalarmyDot1xAuthObjectsTxPeriod | read-write | current | The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.4 | ScalarmyDot1xAuthObjectsSuppTimeout | read-write | current | The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.5 | ScalarmyDot1xAuthObjectsServerTimeout | read-write | current | The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.6 | ScalarmyDot1xAuthObjectsMaxReq | read-write | current | The value of the maxReq constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.7 | ScalarmyDot1xAuthObjectsReAuthPeriod | read-write | current | The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.8 | ScalarmyDot1xAuthObjectsMaxReauth | read-write | current | The value of the reAuthMax constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.9 | ScalarmyDot1xAuthObjectsReAuthEnable | read-write | current | The enable(1)/disable(2) control used by the Reauthentication Timer state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10 | TablemyDot1xAuthObjectsConfigTable | not-accessible | current | A table that contains the configuration objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address… |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1 | RowmyDot1xAuthObjectsConfigEntry | not-accessible | current | The configuration information for an Authenticator PAE. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.1 | ColumnmyDot1xAuthObjectsConfigFdbId | read-only | current | The VID of vlan which the address blongs to. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.2 | ColumnmyDot1xAuthObjectsConfigAddr | read-only | current | The MAC address associated with this configurations. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.3 | ColumnmyDot1xAuthObjectsPaeState | read-only | current | The current value of the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.4 | ColumnmyDot1xAuthObjectsBackendAuthState | read-only | current | The current state of the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.5 | ColumnmyDot1xAuthObjectsAuthControlledPortStatus | read-only | current | The current value of the controlled Port status parameter for the Port. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.6 | ColumnmyDot1xAuthObjectsKeyTxEnabled | read-only | current | The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.10.1.7 | ColumnmyDot1xAuthObjectsIfIndex | read-only | current | The interface index associated with this configurations |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11 | TablemyDot1xAuthObjectsStatsTable | not-accessible | current | A table that contains the statistics objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address th… |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1 | RowmyDot1xAuthStatsEntry | not-accessible | current | The statistics information for an Authenticator PAE. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.1 | ColumnmyDot1xAuthObjectsStatsFdbId | read-only | current | The VID of vlan which the address blongs to. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.2 | ColumnmyDot1xAuthObjectsStatsAddr | read-only | current | The MAC address associated with this states. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.3 | ColumnmyDot1xAuthObjectsEapolFramesRx | read-only | current | The number of valid EAPOL frames of any type that have been received by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.4 | ColumnmyDot1xAuthObjectsEapolFramesTx | read-only | current | The number of EAPOL frames of any type that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.5 | ColumnmyDot1xAuthObjectsEapolMyFramesRx | read-only | current | The number of EAPOL My frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.6 | ColumnmyDot1xAuthObjectsEapolLogoffFramesRx | read-only | current | The number of EAPOL Logoff frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.7 | ColumnmyDot1xAuthObjectsEapolRespIdFramesRx | read-only | current | The number of EAP Resp/Id frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.8 | ColumnmyDot1xAuthObjectsEapolRespFramesRx | read-only | current | The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.9 | ColumnmyDot1xAuthObjectsEapolReqIdFramesTx | read-only | current | The number of EAP Req/Id frames that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.10 | ColumnmyDot1xAuthObjectsEapolReqFramesTx | read-only | current | The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.11 | ColumnmyDot1xAuthObjectsInvalidEapolFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.12 | ColumnmyDot1xAuthObjectsEapLengthErrorFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.13 | ColumnmyDot1xAuthObjectsLastEapolFrameVersion | read-only | current | The protocol version number carried in the most recently received EAPOL frame. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.11.1.14 | ColumnmyDot1xAuthObjectsLastEapolFrameSource | read-only | current | The source MAC address carried in the most recently received EAPOL frame. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.12 | ScalarmyDot1xCurrentUserNumber | read-only | current | Numbers of users who attached to the system ,regardless of their state. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.13 | ScalarmyDot1xCurrentAuthenticatedUserNumber | read-only | current | Numbers of user who attached to the system and their current state is authorized |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.14 | ScalarmyDot1xAccountStatus | read-write | current | The enable(1)/disable(2) control used by the accounting function. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.15 | TablemyAuthIfTable | not-accessible | current | The table of the authenticated status of interface. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.15.1 | RowmyAuthIfEntry | not-accessible | current | The entry of MAC address which can be authenticated. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.15.1.1 | ColumnmyAuthIf | read-only | current | The port number of the port/trunk to which frames received from a specific port/trunk and destined for a specific MAC address. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.15.1.2 | ColumnmyAuthIfStatus | read-write | current | The authentication status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.16 | ScalarmyAuthenticationMode | read-write | current | Mode used for authentication |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.17 | ScalarmyDot1xAccountUpdateStatus | read-write | current | Account Update Status |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.18 | ScalarmyDot1xAcctInterimInterval | read-write | current | Account Interim Interval |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.19 | ScalarmyDot1xEapolTagEnabled | read-write | current | Eapol Tag Enabled |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.20 | TablemyDot1xIfUserMaxTable | not-accessible | current | The table of the max dot1x user number on authenticated interface. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.20.1 | RowmyDot1xIfUserMaxEntry | not-accessible | current | The entry of max dot1x user number on authenticated interface. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.20.1.1 | ColumnmyDot1xIfUserMaxIndex | read-only | current | The interface index which dot1x authentication is enabled. |
| 1.3.6.1.4.1.171.10.97.2.19.1.1.20.1.2 | ColumnmyDot1xIfUserMaxNum | read-write | current | The max dot1x user num on the interface, this is valid only when dot1x authentication is enable on that interface. Number 0 indicates no user number limits ena… |
| 1.3.6.1.4.1.171.10.97.2.19.1.2 | NodemyAAAServerObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.2.2 | ScalarmyAAAServerAuthPort | read-write | current | UDP port used for authentication in the global configuration. For RADIUS only, default value is 1812. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.3 | ScalarmyAAAServerAcctPort | read-write | current | UDP port used for accounting service in the global configuration. For RADIUS only, default value is 1813. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.4 | ScalarmyAAAServerRadiusKeyStr | read-write | current | The server key to be used with all RADIUS server. Retrieving the value of this object via SNMP will return an empty string for security reasons. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.8 | ScalarmyAAAServerTacplusKeyStr | read-write | current | The server key to be used with all TACACS+ server. Retrieving the value of this object via SNMP will return an empty string for security reasons. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9 | TablemyAAAServerConfigTable | not-accessible | current | This table shows current configurations for each AAA server, allows existing servers to be removed and new ones to be created. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1 | RowmyAAAServerConfigEntry | not-accessible | current | The table of AAA server configuration identified by its protocol and its index. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.1 | ColumnmyAAAServerConfigProtocol | not-accessible | current | The variable denotes the protocol used by the managed device with the AAA server corresponding to this entry in the table. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.2 | ColumnmyAAAServerConfigIndex | not-accessible | current | A number uniquely identifying each server. If the myAAAServerConfigIndex value for row creation is already in use by an existing entry, snmp set to the myAAASe… |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.3 | ColumnmyAAAServerConfigAddressType | read-create | current | The type of address format used for the myAAAServerConfigAddress object. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.4 | ColumnmyAAAServerConfigAddress | read-create | current | The IP address of the server. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.5 | ColumnmyAAAServerConfigAuthPort | read-create | current | UDP/TCP port used for authentication in the server. For RADIUS, default value is 1812. For TACACS+, default value is 49. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.6 | ColumnmyAAAServerConfigAcctPort | read-create | current | UDP/TCP port used for accounting service in the server. For RADIUS, default value is 1813. For TACACS+, the value of myAAAServerConfigAcctPort is ignored, myAA… |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.7 | ColumnmyAAAServerConfigKeyStr | read-create | current | The server key to be used with this server. Retrieving the value of this object via SNMP will return an empty string for security reasons. |
| 1.3.6.1.4.1.171.10.97.2.19.1.2.9.1.8 | ColumnmyAAAServerConfigRowStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified except destroyed by setting this object to dest… |
| 1.3.6.1.4.1.171.10.97.2.19.1.3 | NodemyAuthUserObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.3.1 | TablemyAuthAddrTable | not-accessible | current | The table of MAC address which can be authenticated. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.1.1 | RowmyAuthAddrEntry | not-accessible | current | The entry of MAC address which can be authenticated. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.1 | ColumnmyAuthPort | read-only | current | The port number of the port/trunk to which frames received from a specific port/trunk and destined for a specific MAC address. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.2 | ColumnmyAuthMacAddress | read-only | current | The MAC address which can be authenticated. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.1.1.3 | ColumnmyAuthAddrStatus | read-write | current | valid(1) - this entry is currently in use . invalid(2) - writing this value to the object removes the corresponding entry. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2 | TablemyAuthUserTable | not-accessible | current | The table of authentication User Info. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1 | RowmyAuthUserEntry | not-accessible | current | The entry of authentication User Info table. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.1 | ColumnmyAuthUserFdbId | read-only | current | The VID of vlan which the address blongs to. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.2 | ColumnmyAuthUserMacAddress | read-only | current | The MAC Address of authentication User . |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.3 | ColumnmyAuthUserName | read-only | current | The Name of authentication User. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.4 | ColumnmyAuthUserSessionId | read-only | current | The Session Id of authentication User . |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.5 | ColumnmyAuthUserIpAddr | read-only | current | The IP Address of authentication User . |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.6 | ColumnmyAuthUserPort | read-only | current | The interface of authentication User . |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.2.1.7 | ColumnmyAuthUserStatus | read-write | current | Setting this object to 'invalid' will close a authenticated user, set its value to valid will cause no action of agent, when query always return value valid. |
| 1.3.6.1.4.1.171.10.97.2.19.1.3.3 | ScalarmyAuthUserForVPNDel | read-write | current | VPN user's name. Setting this object will delete a authenticated user and this user is unauthenticated. The set string is the username. Reading this object alw… |
| 1.3.6.1.4.1.171.10.97.2.19.1.4 | NodemyAuthModeObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.4.1 | ScalarmyIpAuthorizationMode | read-write | current | disable(1) - don't limit ip address of user dhcpServer(2) - limit ip address of user, only ip address assigned by the dhcp server is legit. radiusServer(3) - l… |
| 1.3.6.1.4.1.171.10.97.2.19.1.5 | NodemyClientProbeObjects | |||
| 1.3.6.1.4.1.171.10.97.2.19.1.5.1 | ScalarmyClientProbeEnabledStatus | read-write | current | The status of client probe function. |
| 1.3.6.1.4.1.171.10.97.2.19.1.5.2 | ScalarmyClientProbeHelloInterval | read-write | current | The interval that client send hello packets. |
| 1.3.6.1.4.1.171.10.97.2.19.1.5.3 | ScalarmyClientProbeAliveInteval | read-write | current | When switch does not receive any legal hello packets from client in this interval,it will send RADIUS-Account-Stop to RADIUS server to stop this connection.The… |
| 1.3.6.1.4.1.171.10.97.2.19.2 | NodemyAAAMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.19.2.1 | NodemyAAAMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.19.2.1.1 | CompliancemyAAAMIBCompliance | current | The compliance statement for entities which implement the My AAA MIB | |
| 1.3.6.1.4.1.171.10.97.2.19.2.2 | NodemyAAAMIBGroups | |||
| 1.3.6.1.4.1.171.10.97.2.19.2.2.1 | GroupmyDot1xAuthMIBGroup | current | A collection of objects providing dot1x authentication managment. | |
| 1.3.6.1.4.1.171.10.97.2.19.2.2.2 | GroupmyAAAServerMIBGroup | current | A collection of objects providing AAA server managment. | |
| 1.3.6.1.4.1.171.10.97.2.19.2.2.3 | GroupmyAuthAddrMIBGroup | current | A collection of objects providing address permitted authentication managment. | |
| 1.3.6.1.4.1.171.10.97.2.19.2.2.4 | GroupmyAuthModeMIBGroup | current | A collection of objects providing authentication mode managment. | |
| 1.3.6.1.4.1.171.10.97.2.19.2.2.5 | GroupmyClientProbeGroup | current | A collection of objects providing client probe management. |