DES7200-QOS-MIB
67 objects
This module defines my QoS(Policy-Based Quality of Service) mibs.
Imported Objects
| DES7200-SMI | myMgmt |
| DES7200-TC | ConfigStatus IfIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.18 | IdentitymyQoSMIB | This module defines my QoS(Policy-Based Quality of Service) mibs. | ||
| 1.3.6.1.4.1.171.10.97.2.18.1 | NodemyQoSPriorityMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.18.1.1 | ScalarmyQoSGlobalStatus | read-write | current | QoS function status |
| 1.3.6.1.4.1.171.10.97.2.18.1.2 | ScalarmyPriorityTrafficClassNum | read-only | current | Number of the traffic class the priority can mapping to. Traffic class is a number in the range (1..myPriorityTrafficClassNum) |
| 1.3.6.1.4.1.171.10.97.2.18.1.3 | ScalarmyPriorityClassNum | read-only | current | Number of the priority class. The range of Priority class is (0..(myPriorityClassNum-1)) |
| 1.3.6.1.4.1.171.10.97.2.18.1.4 | ScalarmyPriorityDscpMaxValue | read-only | current | max value of the dscp in system. |
| 1.3.6.1.4.1.171.10.97.2.18.1.5 | TablemyTrafficClassTable | not-accessible | current | A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (1..myPriorityTrafficClassNum). |
| 1.3.6.1.4.1.171.10.97.2.18.1.5.1 | RowmyTrafficClassEntry | not-accessible | current | User Priority to Traffic Class mapping. |
| 1.3.6.1.4.1.171.10.97.2.18.1.5.1.1 | ColumnmyTrafficClassPriority | read-only | current | The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated … |
| 1.3.6.1.4.1.171.10.97.2.18.1.5.1.2 | ColumnmyTrafficClass | read-write | current | The Traffic Class the received frame is mapped to, Its value ranges between 0 and the value of the object myPriorityTrafficClass - 1. The priority is higher if… |
| 1.3.6.1.4.1.171.10.97.2.18.1.5.1.3 | ColumnmyPriorityToDscp | read-write | current | Dscp value of priority mapping to. |
| 1.3.6.1.4.1.171.10.97.2.18.1.6 | TablemyDscpClassTable | not-accessible | current | A table mapping evaluated dscp to priority. |
| 1.3.6.1.4.1.171.10.97.2.18.1.6.1 | RowmyDscpClassEntry | not-accessible | current | A entry mapping evaluated dscp to priority. |
| 1.3.6.1.4.1.171.10.97.2.18.1.6.1.1 | ColumnmyDscpClass | read-only | current | Dscp value.This value is even number in 0 between62 |
| 1.3.6.1.4.1.171.10.97.2.18.1.6.1.2 | ColumnmyDscpTrafficClassPriority | read-write | current | The priority which dscp value mapped to. This value is in the range(0..(myPriorityClassNum-1)) |
| 1.3.6.1.4.1.171.10.97.2.18.1.7 | ScalarmyPriorityTrafficClassOperMode | read-write | current | The global arithmetic type which the priority traffic class use. |
| 1.3.6.1.4.1.171.10.97.2.18.1.8 | ScalarmyPriorityBandWidth | read-write | current | The global weight setting for every queue Each octet indicate a traffic class queue in the range(1..255) ,first octet indicate first queue. The string length e… |
| 1.3.6.1.4.1.171.10.97.2.18.1.9 | TablemyIfPriorityTable | not-accessible | current | A table that contains information about every interface |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1 | RowmyIfPriorityEntry | not-accessible | current | A list of Default User Priorities for each interface. |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1.1 | ColumnmyIfPriorityIfIndex | read-only | current | |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1.2 | ColumnmyIfPriority | read-write | current | The default ingress User Priority for this interface. This value is in the range (0..(myPriorityClassNum-1)) |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1.3 | ColumnmyIfPriTrafficClassOperMode | read-write | current | The arithmetic type which the priority traffic class use in this interface. |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1.4 | ColumnmyIfPriorityBandwidth | read-write | current | The weight of every queue on a interface. Each octet indicate a traffic class queue in the range(1..255) ,first octet indicate first queue. The string length e… |
| 1.3.6.1.4.1.171.10.97.2.18.1.9.1.5 | ColumnmyIfPriorityQosTrustMode | read-write | current | QoS trust mode for this interface. |
| 1.3.6.1.4.1.171.10.97.2.18.1.10 | TablemyIpPreClassTable | not-accessible | current | A table mapping ip precedence to dscp value. |
| 1.3.6.1.4.1.171.10.97.2.18.1.10.1 | RowmyIpPreClassEntry | not-accessible | current | Ip precedence to dscp mapping. |
| 1.3.6.1.4.1.171.10.97.2.18.1.10.1.1 | ColumnmyIpPreClassPriority | read-only | current | The Ip precedence value determined for the received frame. |
| 1.3.6.1.4.1.171.10.97.2.18.1.10.1.2 | ColumnmyIpPreToDscp | read-write | current | Dscp value of priority mapping to. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11 | TablemyIfRateLimitTable | not-accessible | current | list of rate limit interface objects. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1 | RowmyIfRateLimitEntry | not-accessible | current | Entry ACL interface information. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1.1 | ColumnmyIfRateLimitIndex | read-only | current | |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1.2 | ColumnmyIfRateLimitInMaxBandWidth | read-write | current | Input maximum bandwidth of in units of kbps. 0 indicate that bandwidth will be not limitted. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1.3 | ColumnmyIfRateLimitInBurstFlowLimit | read-write | current | Input limit of burst traffic in units of byte. 0 indicate that burst traffic will be not limitted. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1.4 | ColumnmyIfRateLimitOutMaxBandWidth | read-write | current | Ouput maximum bandwidth of in units of kbps. 0 indicate that bandwidth will be not limitted. |
| 1.3.6.1.4.1.171.10.97.2.18.1.11.1.5 | ColumnmyIfRateLimitOutBurstFlowLimit | read-write | current | Ouput limit of burst traffic in units of byte. 0 indicate that burst traffic will be not limitted. |
| 1.3.6.1.4.1.171.10.97.2.18.2 | NodemyQoSTrafficClassMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.18.2.1 | TablemyQoSTrafficClassTable | not-accessible | current | A table of Qos traffic classification entries. |
| 1.3.6.1.4.1.171.10.97.2.18.2.1.1 | RowmyQoSTrafficClassEntry | not-accessible | current | QoS traffic classification entry.Every valid QoS traffic classification entry need make use of a MyAclEntry which myAclFlowAction is 'permit'. |
| 1.3.6.1.4.1.171.10.97.2.18.2.1.1.1 | ColumnmyQosClassMapName | read-only | current | Name of this QoS class map.This value is unique for every entry. When this string be used as an index,Value of a sub-identifier equal ASCII value of correspond… |
| 1.3.6.1.4.1.171.10.97.2.18.2.1.1.2 | ColumnmyQosClassAclName | read-write | current | Access list name of this class map match.Null indicate that this class map doesn't match any acl |
| 1.3.6.1.4.1.171.10.97.2.18.2.1.1.3 | ColumnmyQosClassMapEntryStatus | read-create | current | Status of this entry, set this object to valid will creat a class map entry, and set its value to invalid will delete this entry. |
| 1.3.6.1.4.1.171.10.97.2.18.2.2 | TablemyQoSPoliceMapTable | not-accessible | current | A table of Qos police map entries. |
| 1.3.6.1.4.1.171.10.97.2.18.2.2.1 | RowmyQoSPoliceMapEntry | not-accessible | current | QoS police map entry. |
| 1.3.6.1.4.1.171.10.97.2.18.2.2.1.1 | ColumnmyQosPoliceMapName | read-only | current | Name of this QoS police map. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier c… |
| 1.3.6.1.4.1.171.10.97.2.18.2.2.1.2 | ColumnmyQosPoliceMapEntryStatus | read-create | current | Status of this entry, set this object to valid will creat a entry, and set its value to invalid will delete this entry. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3 | TablemyQoSPoliceMapConfTable | not-accessible | current | A table of Qos police map config entries. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1 | RowmyQoSPoliceMapConfEntry | not-accessible | current | QoS police map config entry. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.1 | ColumnmyQoSPoliceCfgPoliceMapName | read-only | current | Name of this QoS police map. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier c… |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.2 | ColumnmyQoSPoliceCfgClassMapName | read-write | current | A QoS class map name of this police map match. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(firs… |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.3 | ColumnmyQoSPoliceMapConfMaxBandWidth | read-write | current | Maximum bandwidth of this traffic classification in units of bps. If the Maximum bandwidth is greater than the maximum value reportable by this object then thi… |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.4 | ColumnmyQoSPoliceMapConfBurstFlowLimit | read-write | current | Limit of burst traffic of this traffic classification in units of byte. 0 indicate that burst traffic will be not limitted. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.5 | ColumnmyQoSPoliceMapConfExceedAction | read-write | current | The action deal with the traffic exceeded bandwidth. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.6 | ColumnmyQoSPoliceMapConfExceedDscp | read-write | current | The new dscp value will replaces the old dscp value of packet when traffic of packet has exceeded bandwidth. This value has meaning only when value of myQoSPol… |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.7 | ColumnmyQoSPoliceMapConfNewDscp | read-write | current | The new dscp value will replaces the old dscp value of packet regardless whether the traffic has exceeded bandwidth. Setting this value to -1 indicate that the… |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.8 | ColumnmyQoSPoliceMapCfgEntryStatus | read-create | current | Status of this entry, set this object to valid will creat a entry, and set its value to invalid will delete this entry. |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.9 | ColumnmyQoSPoliceMapConfMaxHighBandWidth | read-write | current | Maximum bandwidth of this traffic classification in units of kbps. 0 indicate that bandwidth will be not limitted. when myQoSPoliceMapConfMaxBandWidth is equal… |
| 1.3.6.1.4.1.171.10.97.2.18.2.5 | TablemyQosPoliceIfExtTable | not-accessible | current | list of QoS Police Map interface objects. |
| 1.3.6.1.4.1.171.10.97.2.18.2.5.1 | RowmyQosPoliceIfExtEntry | not-accessible | current | Entry ACL interface information. |
| 1.3.6.1.4.1.171.10.97.2.18.2.5.1.1 | ColumnmyQosPoliceIfIndex | read-only | current | |
| 1.3.6.1.4.1.171.10.97.2.18.2.5.1.2 | ColumnmyIfInPoliceMapName | read-write | current | Police map name of this interface ingress match. It indicate that this interface doesn't match any ACL which this string is null |
| 1.3.6.1.4.1.171.10.97.2.18.2.5.1.3 | ColumnmyIfOutPoliceMapName | read-write | current | Police map name of this interface egress match. It indicate that this interface doesn't match any ACL which this string is null |
| 1.3.6.1.4.1.171.10.97.2.18.3 | NodemyQoSMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.18.3.1 | NodemyQoSMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.18.3.1.1 | CompliancemyQoSMIBCompliance | current | The compliance statement for entities which implement the My QoS MIB | |
| 1.3.6.1.4.1.171.10.97.2.18.3.2 | NodemyQoSMIBGroups | |||
| 1.3.6.1.4.1.171.10.97.2.18.3.2.1 | GroupmyQoSPriorityMIBGroup | current | A collection of objects providing qos priority ability to a My agent. | |
| 1.3.6.1.4.1.171.10.97.2.18.3.2.2 | GroupmyQoSTrafficClassMIBGroup | current | A collection of objects providing qos traffic classification ability to a My agent. |