DES7200-SYSTEM-MIB
59 objects
This module defines my system mibs.
Imported Objects
| DES7200-SMI | myMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.1 | IdentitymySystemMIB | This module defines my system mibs. | ||
| 1.3.6.1.4.1.171.10.97.2.1.1 | NodemySystemMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.1.1.1 | ScalarmySystemHwVersion | read-only | current | Return the string of the Revision number of hardware resides on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.2 | ScalarmySystemSwVersion | read-only | current | Return the string of the Revision number of software resides on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.3 | ScalarmySystemBootVersion | read-only | current | Return the string of the Revision number of BOOT software resides on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.4 | ScalarmySystemSysCtrlVersion | read-only | current | Return the string of the Revision number of CTRL software resides on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.5 | ScalarmySystemParametersSave | read-write | current | Save all parameters changed in configuration by setting this object to any value but 0, set its value to 0 will cause no action of agent, otherwise all changes… |
| 1.3.6.1.4.1.171.10.97.2.1.1.6 | ScalarmySystemOutBandRate | read-write | current | Determine the console(OutBand) baud rate : 9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5, when the console baud rate is other value will return value 0. |
| 1.3.6.1.4.1.171.10.97.2.1.1.7 | ScalarmySystemReset | read-write | current | This Object allow perform soft reset of system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start trap wi… |
| 1.3.6.1.4.1.171.10.97.2.1.1.8 | ScalarmySwitchLayer | read-only | current | Which layer's device the switch in system |
| 1.3.6.1.4.1.171.10.97.2.1.1.9 | ScalarmySystemHwPower | read-only | current | The state of power. |
| 1.3.6.1.4.1.171.10.97.2.1.1.10 | ScalarmySystemHwFan | read-only | current | The state of fan. |
| 1.3.6.1.4.1.171.10.97.2.1.1.11 | ScalarmySystemOutBandTimeout | read-write | obsolete | The timeout of console.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.171.10.97.2.1.1.12 | ScalarmySystemTelnetTimeout | read-write | obsolete | The timeout of telnet.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.171.10.97.2.1.1.13 | ScalarmySystemMainFile | read-only | current | Return the string of the name of main file on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.14 | ScalarmySystemCurrentPower | read-only | current | Return the current power of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.15 | ScalarmySystemRemainPower | read-only | current | Return the remain power of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.16 | ScalarmySystemTemperature | read-only | current | Return the temperature of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.17 | ScalarmySystemElectricalSourceNum | read-only | current | Return the electrical source number of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.18 | TablemySystemElectricalSourceIsNormalTable | not-accessible | current | A table of electrical source entries. Each object displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.18.1 | RowmySystemElectricalSourceIsNormalEntry | not-accessible | current | An entry displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.18.1.1 | ColumnmySystemElectricalSourceIsNormalIndex | read-only | current | An index that uniquely represents a electrical source. |
| 1.3.6.1.4.1.171.10.97.2.1.1.18.1.2 | ColumnmySystemElectricalSourceIsNormal | read-only | current | This object displays whether an electrical source is normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.18.1.3 | ColumnmySystemElectricalSourceName | read-only | current | The name of electrical source |
| 1.3.6.1.4.1.171.10.97.2.1.1.19 | ScalarmySystemCurrentVoltage | read-only | current | Return the current voltage of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.20 | ScalarmySystemFanNUM | read-only | current | Return the number of fan on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.21 | TablemySystemFanIsNormalTable | not-accessible | current | A table of fan entries. Each object displays whether different fans are normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.21.1 | RowmySystemFanIsNormalEntry | not-accessible | current | An entry displays whether different fans are normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.21.1.1 | ColumnmySystemFanIsNormalIndex | read-only | current | An index that uniquely represents a fan. |
| 1.3.6.1.4.1.171.10.97.2.1.1.21.1.2 | ColumnmySystemFanIsNormal | read-only | current | This object displays whether an fan is normal or not. |
| 1.3.6.1.4.1.171.10.97.2.1.1.21.1.3 | ColumnmySystemFanName | read-only | current | The name of fan |
| 1.3.6.1.4.1.171.10.97.2.1.1.22 | ScalarmySystemReloadTimeRemain | read-only | current | Return the remain time of reloading on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23 | TablemySystemTemperatureTable | not-accessible | current | A table of temperature entries. Each object displays the temperature information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1 | RowmySystemTemperatureEntry | not-accessible | current | An entry displays the temperature information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1.1 | ColumnmySystemTemperatureIndex | read-only | current | An index that uniquely represents a device's temperature information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1.2 | ColumnmySystemTemperatureName | read-only | current | A textual name assigned to a temperature chip |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1.3 | ColumnmySystemTemperatureCurrent | read-only | current | Return the current temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1.4 | ColumnmySystemTemperatureWarningVaule | read-write | current | The first warning of temperature of FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.23.1.5 | ColumnmySystemTemperatureCritialVaule | read-write | current | The second warning of temperature of FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.24 | ScalarmySystemSerialno | read-only | current | Return the string of the serial number resides on the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25 | TablemySystemVersionTable | not-accessible | current | A table of system version entries. Each object displays the system version information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1 | RowmySystemVersionEntry | not-accessible | current | An entry displays the system version information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.1 | ColumnmySystemVersionIndex | read-only | current | An index that uniquely represents a device's system version information. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.2 | ColumnmySystemVersionName | read-only | current | A textual name assigned to a system version chip |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.3 | ColumnmySystemVersionSwBoot | read-only | current | Return the software boot system version of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.4 | ColumnmySystemVersionSwCtrl | read-only | current | Return the software ctrl system version of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.5 | ColumnmySystemVersionSwMain | read-only | current | Return the software main system version of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.6 | ColumnmySystemVersionHw | read-only | current | Return the hardware system version of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.1.25.1.7 | ColumnmySystemVersionSerialno | read-only | current | Return the serial number of the FastSwitch. |
| 1.3.6.1.4.1.171.10.97.2.1.2 | NodemySystemMIBTraps | |||
| 1.3.6.1.4.1.171.10.97.2.1.2.1 | ScalarmySystemHardChangeDesc | accessible-for-notify | current | The description of hard change |
| 1.3.6.1.4.1.171.10.97.2.1.2.2 | NotificationmySystemHardChangeDetected | current | System hardware has changed include number of devices or number of modules or the place or type of the module is change. | |
| 1.3.6.1.4.1.171.10.97.2.1.2.3 | NotificationmySystemPowerStateChange | current | while the state of power changed, then this trap will be sent. | |
| 1.3.6.1.4.1.171.10.97.2.1.2.4 | NotificationmySystemFanStateChange | current | while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.171.10.97.2.1.3 | NodemySystemMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.1.3.1 | NodemySystemMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.1.3.1.1 | CompliancemySystemMIBCompliance | current | The compliance statement for entities which implement the My System MIB | |
| 1.3.6.1.4.1.171.10.97.2.1.3.2 | NodemySystemMIBGroups | |||
| 1.3.6.1.4.1.171.10.97.2.1.3.2.1 | GroupmySystemMIBGroup | current | A collection of objects providing system information and opertion to a My agent. |