DEV-CFG-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| OS-COMMON-TC-MIB | nbSwitchG1Il |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629.1.50.11 | NodenbDeviceConfig | |||
| 1.3.6.1.4.1.629.1.50.11.1 | NodenbDevGen | |||
| 1.3.6.1.4.1.629.1.50.11.1.1 | ScalarnbDevOperationMode | read-only | mandatory | The Operational mode of Device. This is for internal usage. |
| 1.3.6.1.4.1.629.1.50.11.1.2 | ScalarnbDevErrorText | read-only | mandatory | This is the text of the last error that the agent found. it is sent to the RS232 port, and it used by the manager to show the cause of the last error. |
| 1.3.6.1.4.1.629.1.50.11.1.3 | ScalarnbsDevTftpMode | read-write | mandatory | The TFTP Download Process mode of the Device. The 'client' mode is a default. |
| 1.3.6.1.4.1.629.1.50.11.1.4 | ScalarnbDevRouterSaveConfig | read-write | mandatory | If operation SET is issued with value saveConfig(1), all configuration is to be saved in relevant configuration files; SET with value warmReset(2) causes only … |
| 1.3.6.1.4.1.629.1.50.11.1.5 | ScalarnbsDevProperties | read-only | mandatory | Additional Device Properties. This MIB Object is created as a Bits Mask, when the corresponding Bit says about the specific property. value=0 : If no additiona… |
| 1.3.6.1.4.1.629.1.50.11.1.6 | ScalarnbsDevTemperatureMode | read-only | mandatory | The Temperature Mode of Device. |
| 1.3.6.1.4.1.629.1.50.11.1.7 | NodeinvalidPassword | The SNMP trap that is generated when invalid password was used in the current protocol session. | ||
| 1.3.6.1.4.1.629.1.50.11.1.7 | ScalarnbsDevResetAfterDnldMode | read-write | mandatory | Device Reset Mode after Download process. In case of 'yes'(2) the Reset will be created immediately after the Download process will successfuly finish; In case… |
| 1.3.6.1.4.1.629.1.50.11.1.8 | NodenbsDevPS | |||
| 1.3.6.1.4.1.629.1.50.11.1.8 | NodewrongAccess | The SNMP trap that is generated when wrong access attempt is occured. | ||
| 1.3.6.1.4.1.629.1.50.11.1.8.1 | ScalarnbsDevPSNumber | read-only | mandatory | The number of Power Supplies in the corresponding Device. Value = 0 says, that Power Supply Table is not supported. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2 | TablenbsDevPSTable | not-accessible | mandatory | This table shows all the Power Supplies modules, existing in the corresponding Device. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2 | NodepowerSupplyUp | The SNMP trap that is generated when power supply unit changes it's state from notActive to active | ||
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1 | RownbsDevPSEntry | not-accessible | mandatory | The entries of the table. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.1 | ColumnnbsDevPSIndex | read-only | mandatory | The index of the table, (MAX Value is equal to nbsDevPSNumber). |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.2 | ColumnnbsDevPSType | read-only | mandatory | The physical Type of the Power Supply. acPS (2) - alternating current PS, dcPS (3) - dirrect current PS, externalPS (4) - external PS. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.3 | ColumnnbsDevPSDescription | read-only | mandatory | The Text Decription of the Power Supply. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.4 | ColumnnbsDevPSRedundantMode | read-only | mandatory | The working mode of the Power Supply. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.5 | ColumnnbsDevPSOperStatus | read-only | mandatory | The Oper status of the Power Supply. |
| 1.3.6.1.4.1.629.1.50.11.1.8.2.1.6 | ColumnnbsDevPSAdminStatus | read-write | mandatory | The Admin status of the Power Supply. |
| 1.3.6.1.4.1.629.1.50.11.1.8.3 | NodepowerSupplyDown | The SNMP trap that is generated when power supply unit changes it's state from active to notActive | ||
| 1.3.6.1.4.1.629.1.50.11.1.8.4 | NodepowerSupplyPresent | The SNMP trap that is generated when power supply unit installed on device | ||
| 1.3.6.1.4.1.629.1.50.11.1.8.5 | NodepowerSupplyNotPresent | The SNMP trap that is generated when power supply unit not installed on device | ||
| 1.3.6.1.4.1.629.1.50.11.1.9 | NodenbsDevPSInput | |||
| 1.3.6.1.4.1.629.1.50.11.1.9.1 | ScalarnbsDevPSInputNumber | read-only | mandatory | The number of Power Suppliy Inputs in the corresponding Device. Value = 0 says, that Power Supply Inputs Table is not supported. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2 | TablenbsDevPSInputTable | not-accessible | mandatory | This table shows all the Power Supply Inputs, existing in the corresponding Device. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1 | RownbsDevPSInputEntry | not-accessible | mandatory | The entries of the table. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.1 | ColumnnbsDevPSInputIndex | read-only | mandatory | The index of the table, (MAX Value is equal to nbsDevPSInputNumber). |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.2 | ColumnnbsDevPSInputType | read-only | mandatory | The physical Type of the Power Supply. acInput (2) - alternating current input, dcInput (3) - direct current input, dcRedundInput (4) - direct current Redundan… |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.3 | ColumnnbsDevPSInputDescription | read-only | mandatory | The Text Decription of the Power Supply Input. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.4 | ColumnnbsDevPSInputRedundantMode | read-only | mandatory | The Redundant mode of the Power Supply Input. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.5 | ColumnnbsDevPSInputOperStatus | read-only | mandatory | The Oper status of the Power Supply Input. |
| 1.3.6.1.4.1.629.1.50.11.1.9.2.1.6 | ColumnnbsDevPSInputAdminStatus | read-write | mandatory | The Admin status of the Power Supply Input. |
| 1.3.6.1.4.1.629.1.50.11.1.10 | NodenbsDevCPU | |||
| 1.3.6.1.4.1.629.1.50.11.1.10.1 | ScalarnbsDevCPUNumber | read-only | mandatory | The number of CPU cards in the corresponding Device. Value = 0 says, that CPU Table is not supported. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2 | TablenbsDevCPUTable | not-accessible | mandatory | This table shows all the CPU modules, existing in the corresponding Device. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1 | RownbsDevCPUEntry | not-accessible | mandatory | The entries of the table. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.1 | ColumnnbsDevCPUIndex | read-only | mandatory | The index of the table, (MAX Value is equal to nbsDevCPUNumber). |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.2 | ColumnnbsDevCPUType | read-only | mandatory | The physical Type of the CPU. - cx33cpu2MBflash16MBdram (2) CPU CX with 33Mhz clock,2MB Flash Memory and 16 MB DRAM Memory, - cx33cpu4MBflash16MBdram (2) CPU C… |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.3 | ColumnnbsDevCPUDescription | read-only | mandatory | The Text Decription of the CPU card. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.4 | ColumnnbsDevCPURedundantMode | read-only | mandatory | The Redundant mode of the CPU card. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.5 | ColumnnbsDevCPUOperStatus | read-only | mandatory | The Oper status of the CPU card. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.6 | ColumnnbsDevCPUAdminStatus | read-write | mandatory | The Admin status of the CPU card. |
| 1.3.6.1.4.1.629.1.50.11.1.10.2.1.7 | ColumnnbsDevCPUOrderNumber | read-only | mandatory | The order number of the CPU card. |
| 1.3.6.1.4.1.629.1.50.11.1.11 | NodenbsDevFAN | |||
| 1.3.6.1.4.1.629.1.50.11.1.11.1 | ScalarnbsDevFANsNumber | read-only | mandatory | The number of FAN cards in the corresponding Device. Value = 0 says, that FAN Table is not supported. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2 | TablenbsDevFANTable | not-accessible | mandatory | This table shows all the FAN modules, existing in the corresponding Device. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1 | RownbsDevFANEntry | not-accessible | mandatory | The entries of the table. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.1 | ColumnnbsDevFANIndex | read-only | mandatory | The index of the table, (MAX Value is equal to nbsDevFANsNumber). |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.2 | ColumnnbsDevFANType | read-only | mandatory | The physical Type of the FAN. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.3 | ColumnnbsDevFANDescription | read-only | mandatory | The Text Decription of the FAN card. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.5 | ColumnnbsDevFANOperStatus | read-only | mandatory | The Oper status of the FAN card. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.6 | ColumnnbsDevFANAdminStatus | read-write | mandatory | The Admin status of the FAN card. |
| 1.3.6.1.4.1.629.1.50.11.1.11.2.1.7 | ColumnnbsDevFANSpeed | read-only | mandatory | Current PWM fan speed (percent units) |
| 1.3.6.1.4.1.629.1.50.11.1.11.46 | NodefanUnitUp | The SNMP trap that is generated when FAN unit changes it's state from notActive to active | ||
| 1.3.6.1.4.1.629.1.50.11.1.11.47 | NodefanUnitDown | The SNMP trap that is generated when FAN unit changes it's state from active to notActive | ||
| 1.3.6.1.4.1.629.1.50.11.1.12 | NodedeviceRCMredundancyState | Generate SNMP trap when RCM Redundancy state of the device is changed. | ||
| 1.3.6.1.4.1.629.1.50.11.1.12 | ScalarnbsDevHeaterStatus | read-only | mandatory | The Heater Status of Device. |
| 1.3.6.1.4.1.629.1.50.11.1.13 | NodenbsDevPhysParams | |||
| 1.3.6.1.4.1.629.1.50.11.1.13.1 | ScalarnbsDevPhParamDevAmbientTempC | read-only | mandatory | The Device Ambient Temperature [Celsius scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.13.2 | ScalarnbsDevPhParamPackProcTempC | read-only | mandatory | The Device Packet Processor Temperature [Celsius scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.13.3 | ScalarnbsDevPhParamCpuTempC | read-only | mandatory | The Device CPU Temperature [Celsius scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.13.7 | ScalarnbsDevPhParamDevAmbientTempF | read-only | mandatory | The Device Ambient Temperature [Fahrenheit scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.13.8 | ScalarnbsDevPhParamPackProcTempF | read-only | mandatory | The Device Packet Processor Temperature [Fahrenheit scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.13.9 | ScalarnbsDevPhParamCpuTempF | read-only | mandatory | The Device CPU Temperature [Fahrenheit scale]. |
| 1.3.6.1.4.1.629.1.50.11.1.14 | NodenbsDevPSHost | |||
| 1.3.6.1.4.1.629.1.50.11.1.14.1 | ScalarnbsDevPSHostsNumber | read-only | mandatory | The number of Power Supplies Hosts in the corresponding Device. Value = 0 says, that Power Supply Hosts Table is not supported. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2 | TablenbsDevPSHostTable | not-accessible | mandatory | This table shows all the Power Supplies modules, existing in the corresponding Device. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1 | RownbsDevPSHostEntry | not-accessible | mandatory | The entries of the table. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.1 | ColumnnbsDevPSHostIndex | read-only | mandatory | The index of the table, (MAX Value is equal to nbsDevPSHostsNumber). |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.2 | ColumnnbsDevPSHostType | read-only | mandatory | The physical Type of the Power Supply Host. acPSHost (2) - alternating current PS, dcPSHost (3) - dirrect current PS. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.3 | ColumnnbsDevPSHostDescr | read-only | mandatory | The Text Decription of the Power Supply Host. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.4 | ColumnnbsDevPSHostPSNumber | read-only | mandatory | Power Supplies Number in the Host. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.6 | ColumnnbsDevPSHostFirstPS | read-only | mandatory | Number of the First Power Supply in the Host. according to the Power Supplies Numeration. in the nbsDevPSTable. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.8 | ColumnnbsDevPSHostOperStatus | read-only | mandatory | The Oper status of the Power Supply Host. |
| 1.3.6.1.4.1.629.1.50.11.1.14.2.1.10 | ColumnnbsDevPSHostAdminStatus | read-write | mandatory | The Admin status of the Power Supply Host. |
| 1.3.6.1.4.1.629.1.50.11.1.15 | ScalarnbsDevTemperatureProfile | read-only | mandatory | The Temperature profile of Device. |
| 1.3.6.1.4.1.629.1.50.11.1.15 | ScalarnbsSysRomVers | read-only | mandatory | The SNMP Agent firmware Rom version |
| 1.3.6.1.4.1.629.1.50.11.1.20 | NodesnmpAccessMode | Generate SNMP trap when SNMP Access mode of the device is changed. | ||
| 1.3.6.1.4.1.629.1.50.11.1.21 | NodesnmpRequestRejected | Generate SNMP trap when an SNMP Request is rejected due to SNMP Access Mode of the Device. | ||
| 1.3.6.1.4.1.629.1.50.11.1.48 | NodedeviceTemperatureNormal | The SNMP trap that is generated when Device Temperature changes it's state from High to Normal | ||
| 1.3.6.1.4.1.629.1.50.11.1.49 | NodedeviceTemperatureHigh | The SNMP trap that is generated when Device Temperature changes it's state from Normal to High | ||
| 1.3.6.1.4.1.629.1.50.11.1.50 | NodeAdminPasswdChange | The SNMP trap that is generated when admin password is changed. | ||
| 1.3.6.1.4.1.629.1.50.11.1.50 | NodenbsDevTrapVars | |||
| 1.3.6.1.4.1.629.1.50.11.1.50.1 | ScalarnbsDevSessionType | read-only | mandatory | The type of the protocol session in use when the LOGIN password is invalidated. |
| 1.3.6.1.4.1.629.1.50.11.1.50.2 | ScalarnbsDevAuthenticationRejectReason | read-only | mandatory | The reason for the Authentication Error. |
| 1.3.6.1.4.1.629.1.50.11.1.50.5 | ScalarnbsTrapLoginName | read-only | mandatory | The Login User Name that creates wrong access. |
| 1.3.6.1.4.1.629.1.50.11.1.50.6 | ScalarnbsTrapHostIpAddress | read-only | mandatory | The Remote Host Name (Ip Address or DNS Name) that attempts wrong access. |
| 1.3.6.1.4.1.629.1.50.11.1.50.7 | ScalarnbsTrapWrongAccessDateTime | read-only | mandatory | The Date / Time of the wrong access. |
| 1.3.6.1.4.1.629.1.50.11.1.50.8 | ScalarnbsTrapRCMredundancyState | read-only | mandatory | RCM Redundancy State of device. |
| 1.3.6.1.4.1.629.1.50.11.1.50.10 | ScalarnbsDevSNMPAccessMode | read-only | mandatory | SNMP access mode of device. |
| 1.3.6.1.4.1.629.1.50.11.1.50.11 | ScalarnbsDeviceTrapReason | read-only | mandatory | The reason of the coming TRAP. |
| 1.3.6.1.4.1.629.1.50.11.1.50.12 | ScalarnbsDeviceTrapAdminPasswdChangeDescripton | read-only | mandatory | The admin password change TRAP. |