DEVFILTER-MIB
39 objects
This group provides Filter related information for BSU or SU.
Imported Objects
| ANIROOT-MIB | device |
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.2.8 | IdentityaniDevFilter | This group provides Filter related information for BSU or SU. | ||
| 1.3.6.1.4.1.4325.2.8.1 | TableaniDevFilterTable | not-accessible | current | This table allows the user to view the configured IP Filters. |
| 1.3.6.1.4.1.4325.2.8.1.1 | RowaniDevFilterEntry | not-accessible | current | An entry containing objects for each IP Filter configured. |
| 1.3.6.1.4.1.4325.2.8.1.1.1 | ColumnaniDevFilterIfIndex | read-write | current | The Interface Type. On SU, only ethernet(1) and wireless-port1(2) are valid. On BSU, ethernet(1) and all configured wireless interfaces wireless-port4(5), wire… |
| 1.3.6.1.4.1.4325.2.8.1.1.2 | ColumnaniDevFilterIdentifier | read-write | current | A unique number which identifies the filtering rule. |
| 1.3.6.1.4.1.4325.2.8.1.1.3 | ColumnaniDevFilterName | read-write | current | A name which identifies the filtering rule. |
| 1.3.6.1.4.1.4325.2.8.1.1.4 | ColumnaniDevFilterPriority | read-write | current | The priority for the filtering rule. It should be unique. A higher number means higher priority. |
| 1.3.6.1.4.1.4325.2.8.1.1.5 | ColumnaniDevFilterActivationState | read-write | current | The state of the filtering rule. |
| 1.3.6.1.4.1.4325.2.8.1.1.6 | ColumnaniDevFilterPermission | read-write | current | The permissions for the filtering rule. |
| 1.3.6.1.4.1.4325.2.8.1.1.7 | ColumnaniDevFilterIpProtocol | read-write | current | The IP protocol value. List of well known IP Protocols: Protocol Value ICMP 1 IGMP 2 TCP 6 EGP 8 UDP 17 IPIP 94 RSVP 46 GRE 47 TCP or UDP 257 Apart from the ab… |
| 1.3.6.1.4.1.4325.2.8.1.1.8 | ColumnaniDevFilterIpSaddr | read-write | current | The source IP address for this Filter. IP Source Address and Subnet Mask go in a pair. So if aniDevFilterIpSaddr is configured, then aniDevFilterIpSmask should… |
| 1.3.6.1.4.1.4325.2.8.1.1.9 | ColumnaniDevFilterIpSmask | read-write | current | The Subnet mask for the source IP Address. IP Source Address and Subnet Mask go in a pair. So if aniDevFilterIpSaddr is configured, then aniDevFilterIpSmask sh… |
| 1.3.6.1.4.1.4325.2.8.1.1.10 | ColumnaniDevFilterIpDaddr | read-write | current | The destination IP address for this Filter. IP Destination Address and Subnet Mask go in a pair. So if aniDevFilterIpDaddr is configured, then aniDevFilterIpDm… |
| 1.3.6.1.4.1.4325.2.8.1.1.11 | ColumnaniDevFilterIpDmask | read-write | current | The Subnet mask for the destination IP Address. IP Destination Address and Subnet Mask go in a pair. So if aniDevFilterIpDaddr is configured, then aniDevFilter… |
| 1.3.6.1.4.1.4325.2.8.1.1.12 | ColumnaniDevFilterIpSourceStart | read-write | current | The lowest bound value for the source port number. List of Some Well Known Ports: Application Port Ftp Data 20 Ftp Control 21 HTTP 80 IMAP2 143 SNMP 161 POP3 1… |
| 1.3.6.1.4.1.4325.2.8.1.1.13 | ColumnaniDevFilterIpSourceEnd | read-write | current | The highest bound value for the source port number. Refer to the Well known ports list under aniIpFilterIpSourceStart description. In addition to the list, the… |
| 1.3.6.1.4.1.4325.2.8.1.1.14 | ColumnaniDevFilterIpDestStart | read-write | current | The lowest bound value for the destination port number. Refer to the Well known ports list under aniIpFilterIpSourceStart description. In addition to the list,… |
| 1.3.6.1.4.1.4325.2.8.1.1.15 | ColumnaniDevFilterIpDestEnd | read-write | current | The highest bound value for the destination port number. Refer to the Well known ports list under aniIpFilterIpSourceStart description. In addition to the list… |
| 1.3.6.1.4.1.4325.2.8.1.1.16 | ColumnaniDevFilterIpOptions | read-write | current | The Mask value for the IP Options. No Operation (0x000001) Route Record (0x000002) Time Stamp (0x000040) MTU Probe (0x000008) MTU Reply (0x000010) Trace Route … |
| 1.3.6.1.4.1.4325.2.8.1.1.17 | ColumnaniDevFilterIpSecOptions | read-write | current | The IP Security Value. |
| 1.3.6.1.4.1.4325.2.8.1.1.18 | ColumnaniDevFilterIcmpMsgType | read-write | current | The Message Type for ICMP Protocol. This field is valid only if the aniDevFilterIpProtocol is set to ICMP or not specified by the user. Valid Range: ICMP Messa… |
| 1.3.6.1.4.1.4325.2.8.1.1.19 | ColumnaniDevFilterIcmpSubcode | read-write | current | The Subcode for ICMP Protocol. This field is valid only if the aniDevFilterIpProtocol is set to ICMP or not specified by the user. If this field is specified t… |
| 1.3.6.1.4.1.4325.2.8.1.1.20 | ColumnaniDevFilterTcpFlags | read-write | current | The TCP Flags. The valid range: Urgent (0x20) Acknowledgement (0x10) Push (0x08) Reset (0x04) Sync (0x02) Sync-Ack (0x12) Finish (0x01) Finish-Ack (0x11) This … |
| 1.3.6.1.4.1.4325.2.8.1.1.21 | ColumnaniDevFilterDestMacMask | read-write | current | The MAC address and mask value for destination. |
| 1.3.6.1.4.1.4325.2.8.1.1.22 | ColumnaniDevFilterSourceMac | read-write | current | The MAC Address of the source. |
| 1.3.6.1.4.1.4325.2.8.1.1.23 | ColumnaniDevFilterEnetType | read-write | current | The Ethernet type value in the ethernet header. The maximum length of the ethernet packet is 1500 (0x5DC). The value of the ethernet type must be greater than … |
| 1.3.6.1.4.1.4325.2.8.1.1.24 | ColumnaniDevFilterLlcDSAP | read-write | current | The DSAP (Destination Service Access Point) value in LLC Header. Valid Range: 0 to 0xFF Applicable for IEEE 802.3 Frame Format only. |
| 1.3.6.1.4.1.4325.2.8.1.1.25 | ColumnaniDevFilterLlcSSAP | read-write | current | The SSAP (Source Service Access Point) value in LLC Header. Valid Range: 0 to 0xFF Applicable for IEEE 802.3 Frame Format only. |
| 1.3.6.1.4.1.4325.2.8.1.1.26 | ColumnaniDevFilterLlcControl | read-write | current | The Control Byte of the LLC Header. Valid Range: 0 to 0xFF Applicable for IEEE 802.3 Frame Format only. |
| 1.3.6.1.4.1.4325.2.8.1.1.27 | ColumnaniDevFilterLocalCode | read-write | current | The Local Code for SNAP ethernet type. Applicable for IEEE 802.3 Frame Format only. DSAP should be set to 0xAA, SSAP should be set to 0xAA, Control Byte should… |
| 1.3.6.1.4.1.4325.2.8.1.1.28 | ColumnaniDevFilterRowStatus | read-write | current | This represents the state of an entry within the table. It is used to manage creation and deletion of rows. The values include: active(1) notInService(2) notRe… |
| 1.3.6.1.4.1.4325.2.8.1.1.29 | ColumnaniDevFilterUserPriorityHi | read-write | current | The high priority byte of the user priority. The user priority specifies the matching parameters for the IEEE 802.1P user_priority bits. An Ethernet packet wit… |
| 1.3.6.1.4.1.4325.2.8.1.1.30 | ColumnaniDevFilterUserPriorityLo | read-write | current | The low priority byte of the user priority. The user priority specifies the matching parameters for the IEEE 802.1P user_priority bits. An Ethernet packet with… |
| 1.3.6.1.4.1.4325.2.8.1.1.31 | ColumnaniDevFilterVlanIdStart | read-write | current | The lower limit for the VLAN ID. This value is used to specify the lower limit in the range. Any IEEE 802.1P packet from a customer's VLAN that falls into the … |
| 1.3.6.1.4.1.4325.2.8.1.1.32 | ColumnaniDevFilterVlanIdEnd | read-write | current | The upper limit for the VLAN ID. This value is used to specify the upper limit in the range. Any IEEE 802.1P packet from a customer's VLAN that falls into the … |
| 1.3.6.1.4.1.4325.2.8.2 | TableaniDevFilterIfTable | not-accessible | current | This table allows the user to enable/disable Filtering per interface basis. |
| 1.3.6.1.4.1.4325.2.8.2.1 | RowaniDevFilterIfEntry | not-accessible | current | An entry containing objects for each IP Filter interface configured. |
| 1.3.6.1.4.1.4325.2.8.2.1.1 | ColumnaniDevFilterIfIdentifier | read-write | current | The Interface Type. On SU, only ethernet(1) and wireless-port1(2) are valid. On BSU, ethernet(1) and all configured wireless interfaces wireless-port4(5), wire… |
| 1.3.6.1.4.1.4325.2.8.2.1.2 | ColumnaniDevFilterIfFlag | read-write | current | The flag to enable or disable filtering on a particular interface. The default value depends on whether a rule is configured on the particular interface or not… |