DGS-1100-10ME_A1
1436 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171 | Noded-link | |||
| 1.3.6.1.4.1.171.10 | Nodedlink-products | |||
| 1.3.6.1.4.1.171.10.134 | Nodedlink-DGS1100SeriesProd | |||
| 1.3.6.1.4.1.171.10.134.2 | Nodedgs-1100-10ME | |||
| 1.3.6.1.4.1.171.10.134.2.1 | Nodedgs-1100-10ME_A1 | |||
| 1.3.6.1.4.1.171.10.134.2.1.1 | NodecompanySystem | |||
| 1.3.6.1.4.1.171.10.134.2.1.1.1 | NodesysDevInfo | |||
| 1.3.6.1.4.1.171.10.134.2.1.1.1.1 | ScalarsysSwitchName | read-write | current | System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character: ( ) �V + _ = . |
| 1.3.6.1.4.1.171.10.134.2.1.1.1.2 | ScalarsysHardwareVersion | read-only | current | Version number of the Hardware. |
| 1.3.6.1.4.1.171.10.134.2.1.1.1.3 | ScalarsysFirmwareVersion | read-only | current | Version number of the Firmware. |
| 1.3.6.1.4.1.171.10.134.2.1.1.1.4 | ScalarsysDeviceType | read-only | current | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.4.1.171.10.134.2.1.1.1.5 | ScalarsysBootVerion | read-only | current | Version number of the BootLoader. |
| 1.3.6.1.4.1.171.10.134.2.1.1.2 | ScalarsysLoginTimeout | read-write | current | This time is used to count the time and logout web or telnet interface automatically. |
| 1.3.6.1.4.1.171.10.134.2.1.1.3 | ScalarsysLocationName | read-write | current | The location name of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
| 1.3.6.1.4.1.171.10.134.2.1.1.4 | ScalarsysContact | read-write | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is k… |
| 1.3.6.1.4.1.171.10.134.2.1.1.8 | ScalarsysSafeGuardEnable | read-write | current | This object is used to set Safeguard Enable\Disable. |
| 1.3.6.1.4.1.171.10.134.2.1.1.9 | ScalarsysRestart | read-write | current | This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. This objects also allows user to reset swi… |
| 1.3.6.1.4.1.171.10.134.2.1.1.10 | ScalarsysSave | read-write | current | This object is used to save Configuration. |
| 1.3.6.1.4.1.171.10.134.2.1.1.12 | ScalarsysJumboFrameEnable | read-write | current | Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame … |
| 1.3.6.1.4.1.171.10.134.2.1.1.16 | ScalarsysDhcpAutoConfiguration | read-write | current | This object indicates auto config is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.1.17 | ScalarsysWebState | read-write | current | This object is for Enabled(1) or Disabled(2) Web state in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.1.18 | ScalarsysWebPortNumber | read-write | current | Web Server Port Number. |
| 1.3.6.1.4.1.171.10.134.2.1.1.19 | ScalarsysARPAgingTime | read-write | current | This object is for ARP aging time. |
| 1.3.6.1.4.1.171.10.134.2.1.1.20 | ScalarsysMACAgingTime | read-write | current | This object is for MAC aging time. |
| 1.3.6.1.4.1.171.10.134.2.1.1.23 | ScalarsysTelnetsettingManagementOnOff | read-write | current | Enable/Disable management Telnetsetting mechanism. |
| 1.3.6.1.4.1.171.10.134.2.1.1.24 | ScalarsysTelnetUDPPort | read-write | current | The value is for setting telnet's UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.1.25 | ScalarsysAutoRefreshConfiguration | read-write | current | To set the WEB panel auto refresh timer. |
| 1.3.6.1.4.1.171.10.134.2.1.1.26 | ScalarsysMacAddr | read-only | current | Ethernet address (base address) of the Switch. This base Mac Address, if modified, will take effect only when the Switch is restarted. |
| 1.3.6.1.4.1.171.10.134.2.1.1.27 | ScalarsysSwitchTime | read-write | current | The date is configured in the switch in the format, Hours:Minutes:Seconds Day Month Year e.g 19:10:31 11 08 2005 01-12 Month - beginning from January to Decemb… |
| 1.3.6.1.4.1.171.10.134.2.1.1.28 | ScalarsysDhcpTimeout | read-write | current | This is DHCP auto configuration timeout, the maxium time in seconds to wait before terminate. |
| 1.3.6.1.4.1.171.10.134.2.1.1.29 | ScalarsysSerialNumber | read-only | current | The serial number assigned to this nvram sub-unit |
| 1.3.6.1.4.1.171.10.134.2.1.1.30 | NodesysCPU | |||
| 1.3.6.1.4.1.171.10.134.2.1.1.30.1 | ScalarcpuLast5SecUsage | read-only | current | Indicates the average CPU usage in last 5 second of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.30.2 | ScalarcpuLast1MinUsage | read-only | current | Indicates the average CPU usage in last 1 minute of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.30.3 | ScalarcpuLast5MinUsage | read-only | current | Indicates the average CPU usage in last 5 minute of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.31 | NodesysRAM | |||
| 1.3.6.1.4.1.171.10.134.2.1.1.31.1 | ScalarramLast5SecUsage | read-only | current | Indicates the average RAM usage in last 5 second of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.31.2 | ScalarramLast1MinUsage | read-only | current | Indicates the average RAM usage in last 1 minute of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.31.3 | ScalarramLast5MinUsage | read-only | current | Indicates the average RAM usage in last 5 minute of the switch in percentage |
| 1.3.6.1.4.1.171.10.134.2.1.1.32 | ScalarsysCliPromptStr | read-write | current | Cli Prompt string, some special value definition as below: 1. default - represent using the default value; 2. username - using the current login username; |
| 1.3.6.1.4.1.171.10.134.2.1.1.33 | ScalarsysSshState | read-write | current | Enable/Disable management SSH . |
| 1.3.6.1.4.1.171.10.134.2.1.1.34 | ScalarsysSshPortNumber | read-write | current | The value is for setting SSH's tcp Port. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100 | NodesysPort | |||
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1 | TableportCtrlTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1 | RowportCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.1 | ColumnportCtrlIndex | read-only | current | Interface index of the port for the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.2 | ColumnportCtrlMediumType | read-only | current | This object indicates the port type: fiber 1G/100M or copper. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.3 | ColumnportCtrlSpeed | read-write | current | Configures port speed which the mediatype is match with portCtrlDetailMediumType. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.4 | ColumnportCtrlLinkStatus | read-only | current | The port's operating speed state. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.5 | ColumnportCtrlMDI | read-write | current | Configures interface auto/mdi/mdix mode. The default setting is Auto. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.6 | ColumnportCtrlFlowControl | read-write | current | Enables / disables flow control for the interface. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.7 | ColumnportCtrlFlowControlOper | read-only | current | Show Enables / disables status of flow control for the interface. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.8 | ColumnportCtrlAdminState | read-write | current | Enables / disables Admin for the interface. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.9 | ColumnportCtrlDetailMediumType | read-only | current | Get the port's current media type |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.10 | ColumnportCtrlDynamicMacAutoLearn | read-write | current | Enables / disables dynamic mac auto learning for the interface. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.2 | TableportDescriptionTable | not-accessible | current | The port description table. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.2.1 | RowportDescriptionEntry | not-accessible | current | The port description entry. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.1 | ColumnportDescIndex | read-only | current | This object indicates the port index. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.2 | ColumnportDescMediumType | read-only | current | This object indicates the port type: fiber or copper. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.3 | ColumnportDescString | read-write | current | This object indicates the port description. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3 | TableportErrTable | not-accessible | current | The port error table. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3.1 | RowportErrEntry | not-accessible | current | A list of information for the err port of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.1 | ColumnportErrPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.2 | ColumnportErrPortState | read-only | current | This object decides whether the port state is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.3 | ColumnportErrPortStatus | read-only | current | This object decides whether the PortStatus is err-disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.4 | ColumnportErrPortReason | read-only | current | This object decides whether the PortStatus is LBD, Traffic Control, DULD. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4 | TableportUtilizTable | not-accessible | current | A table to display the TX/RX frames per second and port utilization. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4.1 | RowportUtilizEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.1 | ColumnportUtilizIndex | read-only | current | Interface index of the port for the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.2 | ColumnportUtilizTX | read-only | current | The total number of frames forwarded on the interface during last second. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.3 | ColumnportUtilizRX | read-only | current | The total number of frames received on the interface during last second. |
| 1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.4 | ColumnportUtilizAverage | read-only | current | interface frame usage during last second. |
| 1.3.6.1.4.1.171.10.134.2.1.2 | NodecompanyIpifGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.2.7 | NodesysIpifSupportV4V6Info | |||
| 1.3.6.1.4.1.171.10.134.2.1.2.7.1 | Scalaripv4AddrCfgMode | read-write | current | Specifies the means by which the default interface in the device gets the IP address. If 'manual' mode is selected, the default interface takes the default IPv… |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.2 | Scalaripv4Address | read-write | current | Default IP Address of the system. This IP address, if modified, will take effect only when the configuration is stored & restored. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.3 | Scalaripv4SubnetMask | read-write | current | IP subnet mask for the default IP address. This subnet mask, if modified, will take effect only when the configuration is stored & restored. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.4 | Scalaripv4DefaultGateway | read-write | current | Gateway |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.5 | ScalardhcpOption12Status | read-write | current | Status of DHCP Option12 |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.6 | ScalardhcpOption12HostName | read-write | current | Host name in DHCP option 12 |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.9 | Scalaripv6GlobalStatus | read-write | current | The state of IPv6 function. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.10 | Scalaripv6DHCPStatus | read-write | current | The state of DHCPv6 that you want this interface to be in. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.11 | Scalaripv6AutolinkloStatus | read-write | current | This object is to set the status of ipv6 link local address auto-generated. if set enabled, system will auto-generate a link-local ipv6 address by switch base … |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.12 | Scalaripv6NSRetransmitTime | read-write | current | The NS's retransmit time that you want this interface to be in |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13 | Tableipv6DefaultRouteTable | not-accessible | current | This table contains dynamic routes that are learnt through dynamic routing protocol as well as local routes derived from configured address prefixes and static… |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1 | Rowipv6DefaultRouteEntry | not-accessible | current | An entry in the IPv6 Routing Table. An entry can be created by means of the routing protocol, derived from configured address prefixes as well as statically co… |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.3 | Columnipv6DefaultRouteProtocol | read-only | current | The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.4 | Columnipv6DefaultRouteNextHop | read-only | current | Next hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.5 | Columnipv6DefaultRouteIfIndex | read-only | current | The index value which uniquely identifies the interface through which the next hop of this route should be reached. The interface identified by a particular va… |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.6 | Columnipv6DefaultRouteMetric | read-only | current | The routing metric associated with this route. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.10 | Columnipv6DefaultRouteAdminStatus | read-create | current | Administrative Status of the route. This object is used to create or delete the route entry. The ipv6DefaultRouteIfIndex needs to be set, before the route entr… |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14 | Tableipv6AddressTable | not-accessible | current | A list of interface entries. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1 | Rowipv6AddressEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.1 | Columnipv6AddressMainIndex | read-only | current | The index of this IPv6 entry. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.2 | Columnipv6AddressIpAddr | read-only | current | The ip address of this IPv6 entry. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.3 | Columnipv6AddressIpPrefix | read-only | current | The ip prefix of this IPv6 entry. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.4 | Columnipv6AddressIpType | read-only | current | The ip type of this IPv6 entry. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.5 | Columnipv6AddressRowStatus | read-write | current | The status of an entry. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available. |
| 1.3.6.1.4.1.171.10.134.2.1.2.7.15 | ScalardhcpRetryCount | read-write | current | Retry count of dhcp. |
| 1.3.6.1.4.1.171.10.134.2.1.2.8 | NodesysIpifTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.2.8.1 | NotificationipifDuplicateIPDetected | current | This is a trap that will send to snmp manager,and it will be generated when device receive a gratuitous arp packet and ip address is the same as the one of dev… | |
| 1.3.6.1.4.1.171.10.134.2.1.3 | NodecompanyTftpGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.1 | NodesysTftpFwTargetGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.1.1 | ScalartftpFwTargetServerIpAddress | read-write | current | The TFTP server's IP address is used to upload or download firmware. |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.2 | ScalartftpFwTargetServerIpType | read-write | current | Type of IP interface. |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.3 | ScalartftpFwTargetInterfaceName | read-only | current | Specifies the interface name when the tftpFwTargetServerIpAddress is linklocal address. |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.4 | ScalartftpFwTargetImageFileName | read-write | current | Configure firmware filename to download. |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.5 | ScalartftpFwTargetTftpOperation | read-write | current | The tftp operates to perform downloading the firmware image to the unit. This object is used in conjunction with configBootTftpServerIp and configBootImageFile… |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.6 | ScalartftpFwTargetTftpOperationStatus | read-only | current | The tftp operation status represent firmware backup or upgrade status. |
| 1.3.6.1.4.1.171.10.134.2.1.3.1.7 | ScalartftpFwTargetTransferPercentage | read-only | current | The file transfer percentage of the file upload or download. |
| 1.3.6.1.4.1.171.10.134.2.1.3.2 | NodesysTftpCfgTargetGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.2.1 | ScalartftpCfgTargetServerIpAddress | read-write | current | The TFTP server's IP address is used to upload or download configuration file. |
| 1.3.6.1.4.1.171.10.134.2.1.3.2.2 | ScalartftpCfgTargetServerIpType | read-write | current | Type of IP interface. |
| 1.3.6.1.4.1.171.10.134.2.1.3.2.3 | ScalartftpCfgTargetInterfaceName | read-write | current | Specifies the interface name when the tftpCfgTargetServerIpAddress is linklocal address. |
| 1.3.6.1.4.1.171.10.134.2.1.3.2.4 | ScalartftpCfgTargetImageFileName | read-write | current | The configuration filename is used to store or retrieve config from the tftp server. |
| 1.3.6.1.4.1.171.10.134.2.1.3.2.5 | ScalartftpCfgTargetTftpOperation | read-write | current | The tftp operates to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object … |
| 1.3.6.1.4.1.171.10.134.2.1.3.2.6 | ScalartftpCfgTargetTftpOperationStatus | read-only | current | The tftp operation status represent configuration file backup or restore status. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3 | NodesysTftpSyslogTargetGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.3.1 | ScalarsyslogFileSave | read-write | current | enable will save system log to file. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.2 | ScalartftpSyslogTargetServerIpAddress | read-write | current | The TFTP server's IP address is used to upload or download system log file. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.3 | ScalartftpSyslogTargetServerIpType | read-write | current | Type of IP interface. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.4 | ScalartftpSyslogTargetInterfaceName | read-write | current | Specifies the interface name when the tftpSyslogTargetServerIpAddress is linklocal address. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.5 | ScalartftpSyslogTargetImageFileName | read-write | current | The system log filename is used to store or retrieve system log from the tftp server. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.6 | ScalartftpSyslogTargetTftpOperation | read-write | current | The tftp operates to perform either downloading the system log file to the unit or uploading the current system log file to the tftp server. This object is use… |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.7 | ScalartftpSyslogTargetTftpOperationStatus | read-only | current | The tftp operation status represent system log file backup or restore status. |
| 1.3.6.1.4.1.171.10.134.2.1.3.3.8 | ScalartftpSyslogTargetTftpTransferPercentage | read-only | current | The file transfer percentage of the file upload or download. |
| 1.3.6.1.4.1.171.10.134.2.1.3.4 | NodesysTftpTrapGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0 | NodesysFimwareTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0.1 | NotificationsysFimwareupgradesuccess | current | This is a trap that will send to snmp manager,and it will be generated when Firware upgrade success. | |
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0.2 | NotificationsysFimwareillegalfile | current | This is a trap that will send to snmp manager,and it will be generated when Firware upgrade with issegalfile. | |
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0.3 | NotificationsysFimwarefiletransferfailed | current | This is a trap that will send to snmp manager,and it will be generated when transfer file failed. | |
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0.4 | NotificationsysFimwarewrongchecksum | current | This is a trap that will send to snmp manager,and it will be generated when Firware with wrong checksum . | |
| 1.3.6.1.4.1.171.10.134.2.1.3.4.0.5 | NotificationsysFimwareuupgradefailed | current | This is a trap that will send to snmp manager,and it will be generated when Firware upgrade failed. | |
| 1.3.6.1.4.1.171.10.134.2.1.4 | NodecompanyUserAccount | |||
| 1.3.6.1.4.1.171.10.134.2.1.4.1 | NodesysUserAccount | |||
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1 | TableadminUserTable | not-accessible | current | A table to management user table in the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1 | RowadminUserEntry | not-accessible | current | An entry appears in this table for each user in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.1 | ColumnuserName | read-only | current | The name of user entry. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.2 | ColumnuserPassword | read-write | current | The password of user entry. 0 means no password. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.3 | ColumnuserAccessRight | read-write | current | The access right of user entry. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.4 | ColumnuserEncrypt | read-write | current | The encrypt type of user password. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.5 | ColumnuserEncryptControl | read-write | current | Enable or disable Encrypt of user password. |
| 1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.6 | ColumnuserRowStatus | read-create | current | The row status of user entry. |
| 1.3.6.1.4.1.171.10.134.2.1.4.2 | ScalarsysPasswordEncrypt | read-create | current | encrypt control of user password, default password storage type is plaintext, if set enable, all password storage is dlinksha1 format. |
| 1.3.6.1.4.1.171.10.134.2.1.5 | NodecompanySNMP | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.1 | ScalarsysSNMPGlobalState | read-write | current | This object is for enabling or disabling SNMP Community function. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2 | NodesysSNMPUser | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1 | TablesnmpUserTable | not-accessible | current | The table of snmp user. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1 | RowsnmpUserEntry | not-accessible | current | The list of snmp user entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.1 | ColumnsnmpUserName | read-only | current | A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.2 | ColumnsnmpUserVersion | read-only | current | A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.3 | ColumnsnmpUserGroupName | read-write | current | The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAcces… |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.4 | ColumnsnmpUserAuthProtocol | read-write | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type … |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.5 | ColumnsnmpUserAuthProtocolPassword | read-write | current | Password of snmp user auth protocol. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.6 | ColumnsnmpUserPrivProtocol | read-write | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if s… |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.7 | ColumnsnmpUserPrivProtocolPassword | read-write | current | Password of snmp user priv protocol. |
| 1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.8 | ColumnsnmpUserStatus | read-write | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the us… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3 | NodesysSNMPGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1 | TablesnmpGroupTable | not-accessible | current | The table of snmp group. |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1 | RowsnmpGroupEntry | not-accessible | current | The list of snmp group entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.1 | ColumnsnmpGroupName | read-only | current | The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAcces… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.2 | ColumnsnmpGroupSecurityModel | read-only | current | In order to gain the access rights allowed by this conceptual row, this securityModel must be in use. |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.3 | ColumnsnmpGroupSecurityLevel | read-only | current | The minimum level of security required in order to gain the access rights allowed by this conceptual row. A securityLevel of noAuthNoPriv is less than authNoPr… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.4 | ColumnsnmpGroupReadViewName | read-write | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB vie… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.5 | ColumnsnmpGroupWriteViewName | read-write | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB vi… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.6 | ColumnsnmpGroupNotifyViewName | read-write | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The ident… |
| 1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.7 | ColumnsnmpGroupStatus | read-write | current | The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row … |
| 1.3.6.1.4.1.171.10.134.2.1.5.4 | NodesysSNMPViewTree | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1 | TablesnmpViewTreeTable | not-accessible | current | The table of snmp view tree. |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1 | RowsnmpViewTreeEntry | not-accessible | current | The list of snmp view tree entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.1 | ColumnsnmpViewTreeName | read-only | current | The human readable name for a family of view subtrees. |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.2 | ColumnsnmpViewTreeSubtree | read-only | current | The MIB subtree which when combined with the corresponding instance of vacmViewTreeFamilyMask defines a family of view subtrees. |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.3 | ColumnsnmpViewTreeMask | read-write | current | The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. Each bit of this bit mask c… |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.4 | ColumnsnmpViewTreeType | read-write | current | Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or … |
| 1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.5 | ColumnsnmpViewTreeStatus | read-write | current | The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row … |
| 1.3.6.1.4.1.171.10.134.2.1.5.5 | NodesysSNMPCommunity | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.5.1 | TablesnmpCommunityTable | not-accessible | current | The table of snmp community. |
| 1.3.6.1.4.1.171.10.134.2.1.5.5.1.1 | RowsnmpCommunityEntry | not-accessible | current | The list of snmp community entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.1 | ColumnsnmpCommunityName | read-only | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.2 | ColumnsnmpCommunityPolicy | read-create | current | A human readable string representing the corresponding value of snmpCommunityName in a Security Model independent format. |
| 1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.3 | ColumnsnmpCommunityStatus | read-write | current | The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding column… |
| 1.3.6.1.4.1.171.10.134.2.1.5.6 | NodesysSNMPHost | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1 | TablesnmpHostTable | not-accessible | current | The table of snmp host. |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1 | RowsnmpHostEntry | not-accessible | current | The list of snmp host entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.1 | ColumnsnmpHostAddress | read-only | current | This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object. And this object is unique identi… |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.2 | ColumnsnmpHostIPType | read-only | current | Type of IP interface. |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.3 | ColumnsnmpHostCommunityName | read-write | current | The locally arbitrary. |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.4 | ColumnsnmpHostVersion | read-write | current | The Level of Security to be used when generating SNMP messages using this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.6 | ColumnsnmpHostStatus | read-write | current | The status of this conceptual row in the snmpHostTable. |
| 1.3.6.1.4.1.171.10.134.2.1.5.7 | ScalarsysSNMPEngineID | read-write | current | An SNMP engine's administratively-unique identifier. In a simple agent, this value is always that agent's own snmpEngineID value. The value can also take the v… |
| 1.3.6.1.4.1.171.10.134.2.1.5.8 | NodesysSNMPTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.5.8.1 | ScalarsnmpTrapSNMPAuthentication | read-write | current | This object is for enabling or disabling SNMP login fail event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.2 | ScalarsnmpTrapColdStart | read-write | current | This object is for enabling or disabling devie Bootup event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.3 | ScalarsnmpTrapWarmStart | read-write | current | This object is for enabling or disabling devie bootup event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.4 | ScalarsnmpTrapFiberLinkUpDown | read-write | current | This object is for enabling or disabling fiber port link up / link down event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.5 | ScalarsnmpTrapTwistLinkUpDown | read-write | current | This object is for enabling or disabling twisted pair port link up / link down event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.6 | ScalarsnmpTrapFirmwareUpgrade | read-write | current | This object is for enabling or disabling firmware upgrade success or fail event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.7 | ScalarsnmpTrapPortSecViolation | read-write | current | This object is for enabling or disabling port security event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.8 | ScalarsnmpTrapLBDDetection | read-write | current | This object is for enabling or disabling lbd event trap in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.5.8.9 | ScalarsnmpTrapDuplicateIPDetected | read-write | current | This object is for enabling or disabling send gratuitous trap when IP address conflicted in the network. |
| 1.3.6.1.4.1.171.10.134.2.1.7 | NodecompanyDot1qVlanGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.7.2 | ScalarsysDot1qVlanManagementOnOff | read-write | current | Enable/Disable management VLAN mechanism. |
| 1.3.6.1.4.1.171.10.134.2.1.7.3 | ScalarsysDot1qVlanManagementid | read-write | current | The management VLAN ID, which will allow to forward packets of that VLAN to CPU. |
| 1.3.6.1.4.1.171.10.134.2.1.7.4 | ScalarsysDot1qPVIDAutoAssign | read-write | current | Enable/Disable IEEE 802.1Q PVID Auto assign |
| 1.3.6.1.4.1.171.10.134.2.1.7.5 | ScalarsysDot1qVlanAsyOnOff | read-write | current | Enable/Disable IEEE 802.1Q Asymmetric VLAN |
| 1.3.6.1.4.1.171.10.134.2.1.7.6 | TablesysDot1qVlanTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1 | Rowdot1qVlanEntry | not-accessible | current | Information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1.1 | Columndot1qVlanid | read-write | current | Vlan id used to identify the VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1.2 | Columndot1qVlanName | read-write | current | An administratively assigned string, which may be used to identify the VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1.3 | Columndot1qVlanEgressPorts | read-write | current | The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Re… |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1.4 | Columndot1qVlanUntaggedPorts | read-write | current | The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is … |
| 1.3.6.1.4.1.171.10.134.2.1.7.6.1.5 | Columndot1qVlanRowStatus | read-write | current | The status of a row in sysDot1qVlanTable. By setting this object, new entries can be created in sysDot1qVlanTable and existing entries can be removed from sysD… |
| 1.3.6.1.4.1.171.10.134.2.1.7.7 | TablesysDot1qVlanPortTable | not-accessible | current | A table containing per port control and status information for VLAN configuration in the device. |
| 1.3.6.1.4.1.171.10.134.2.1.7.7.1 | Rowdot1qVlanPortEntry | not-accessible | current | Information controlling VLAN configuration for a port on the device. |
| 1.3.6.1.4.1.171.10.134.2.1.7.7.1.1 | Columndot1qVlanPortIndex | read-only | current | Port index. |
| 1.3.6.1.4.1.171.10.134.2.1.7.7.1.2 | Columndot1qVlanPortVlanId | read-write | current | The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. |
| 1.3.6.1.4.1.171.10.134.2.1.9 | NodecompanyStaticMac | |||
| 1.3.6.1.4.1.171.10.134.2.1.9.1 | TablesysStaticMacTable | not-accessible | current | A list of the Static MACs |
| 1.3.6.1.4.1.171.10.134.2.1.9.1.1 | RowstaticMacEntry | not-accessible | current | A Static MAC entry containing the mac and forwarding port. |
| 1.3.6.1.4.1.171.10.134.2.1.9.1.1.1 | ColumnstaticMacVlanID | read-only | current | The VLAN ID of the static MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.9.1.1.2 | ColumnstaticMacAddr | read-only | current | The MAC address associated of the static MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.9.1.1.3 | ColumnstaticMacPort | read-write | current | The forwarding port of the static MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.9.1.1.4 | ColumnstaticMacStatus | read-write | current | The status of an entry in the Static MAC Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. The trunk member port ca… |
| 1.3.6.1.4.1.171.10.134.2.1.9.2 | TablesysDynamicFdbTable | not-accessible | current | A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.171.10.134.2.1.9.2.1 | RowsysDynamicFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.10.134.2.1.9.2.1.1 | ColumndynamicFdbId | read-only | current | The identity of this Filtering Database. |
| 1.3.6.1.4.1.171.10.134.2.1.9.2.1.2 | ColumndynamicFdbMacAddr | read-only | current | A unicast MAC address for which the device has forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.10.134.2.1.9.2.1.3 | ColumndynamicFdbPort | read-only | current | The port number of the port on which a frame having a source address equal to the value of the corresponding instance of dynamicFdbMacAddr has been seen.If the… |
| 1.3.6.1.4.1.171.10.134.2.1.9.2.1.4 | ColumndynamicFdbStatus | read-only | current | The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corr… |
| 1.3.6.1.4.1.171.10.134.2.1.9.3 | NodesysFdbClear | |||
| 1.3.6.1.4.1.171.10.134.2.1.9.3.1 | ScalarsysFdbClearId | read-write | current | Fdb clear object identification: If cmFdbClearAction is clear by port, then this value is a port number; If cmFdbClearAction is clear by vlan, then this value … |
| 1.3.6.1.4.1.171.10.134.2.1.9.3.2 | ScalarsysFdbClearAction | read-write | current | Fdb clear action identification: ClearAll to clear all fdb entries; ClearClearAllByVlanId clear all fdb entries that belong to specified vlan id; ClearAllByPor… |
| 1.3.6.1.4.1.171.10.134.2.1.10 | NodecompanyIgsGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.10.1 | NodesysIgsSystem | |||
| 1.3.6.1.4.1.171.10.134.2.1.10.1.1 | ScalarigsStatus | read-write | current | Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module starts protocol operations. When set to 'disabled', the IGS module stops… |
| 1.3.6.1.4.1.171.10.134.2.1.10.1.8 | ScalarigsReportForwardRouterOnly | read-write | current | Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module forwards report packets to router port only. When set to 'disabled', the… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3 | NodesysIgsVlan | |||
| 1.3.6.1.4.1.171.10.134.2.1.10.3.3 | TableigsVlanRouterTable | not-accessible | current | This table contains the list of ports through which a router, in a particular VLAN is reachable. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.3.1 | RowigsVlanRouterEntry | not-accessible | current | Contains the VLAN ID and list of ports on which routers are present in the VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.1 | ColumnigsVlanRouterVlanId | read-only | current | VLAN ID of the ports through which router is reachable. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.2 | ColumnigsVlanRouterStaticPortList | read-write | current | List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured sta… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.3 | ColumnigsVlanRouterDynamicPortList | read-only | current | List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured st… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4 | TableigsVlanFilterTable | not-accessible | current | This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1 | RowigsVlanFilterEntry | not-accessible | current | Contains snooping status , version and fast leave configuration for a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.1 | ColumnigsVlanFilterVlanId | read-only | current | Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in IgsVlanFilterEntry is to be done. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.2 | ColumnigsVlanSnoopStatus | read-write | current | This object allows you to enable/disable IGS function on a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.3 | ColumnigsVlanQuerier | read-only | current | Indicates whether the switch is configured as a querier in the VLAN |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.4 | ColumnigsVlanCfgQuerier | read-write | current | The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to … |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.5 | ColumnigsVlanQueryInterval | read-write | current | This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as … |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.6 | ColumnigsVlanFastLeave | read-write | current | Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for … |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.7 | ColumnigsVlanQuerierVersion | read-write | current | This object allows you to set igmp version function on a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.8 | ColumnigsVlanRouterPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt router port entry will be purged for a specific VLAN. For each router port learnt, this timer runs for '… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.9 | ColumnigsVlanHostPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt port entry will be purged for a specific VLAN. For each port on which report has been received this time… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.10 | ColumnigsVlanRobustnessValue | read-write | current | When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attrib… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.11 | ColumnigsVlanGrpQueryInterval | read-write | current | The value of this attribute defines the time period with which the specific VLAN will send group specific queries on a port to check if there is any interested… |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.12 | ColumnigsVlanQueryMaxResponseTime | read-write | current | The maximum query response time advertised General queries on this interface. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5 | TableigsVlanMulticastGroupTable | not-accessible | current | This table contains MAC based multicast forwarding information. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5.1 | RowigsVlanMulticastGroupEntry | not-accessible | current | This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.1 | ColumnigsVlanMulticastGroupVlanId | read-only | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.2 | ColumnigsVlanMulticastGroupIpAddress | read-only | current | Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.3 | ColumnigsVlanMulticastGroupMacAddress | read-only | current | Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format. |
| 1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.4 | ColumnigsVlanMulticastGroupPortList | read-only | current | List of ports onto which the multicast data packets destined for this group will be forwarded. |
| 1.3.6.1.4.1.171.10.134.2.1.10.5 | NodesysIgsAccessAuth | |||
| 1.3.6.1.4.1.171.10.134.2.1.10.5.1 | TableigsAccessAuthTable | not-accessible | current | This table is used to manage the IGMP Authentication function of the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.10.5.1.1 | RowigsAccessAuthEntry | not-accessible | current | Contains management entities for IGMP Authentication function. |
| 1.3.6.1.4.1.171.10.134.2.1.10.5.1.1.1 | ColumnigsAccessAuthPortIndex | read-only | current | The port index of igsAccessAuthTable which indicates the port to be configured. |
| 1.3.6.1.4.1.171.10.134.2.1.10.5.1.1.2 | ColumnigsAccessAuthState | read-write | current | This object can be configured to set IGMP Authentication state to enabled/disabled on each port. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6 | NodesysIgsHost | |||
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1 | TableigsHostTable | not-accessible | current | This table is used to manage the IGMP Host based Fast Leave function of the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1.1 | RowigsHostEntry | not-accessible | current | Contains management entities for IGMP Host based fast leave function. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.1 | ColumnigsHostTableVlanId | read-only | current | VLAN ID of Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.2 | ColumnigsHostTableGroupAddress | read-only | current | Group address of Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.3 | ColumnigsHostTablePort | read-only | current | Port number of Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.4 | ColumnigsHostTableHostIPAddress | read-only | current | Host IP address of Group in Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.12 | NodecompanyQoSGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.1 | ScalarsysQosMode | read-write | current | Settings of Qos mode. Qos PortBase, 802.1p or DSCP mode. PortBase: When Qos in Port Base mode, ingress packets from each port SHOULD be forwarded to the specif… |
| 1.3.6.1.4.1.171.10.134.2.1.12.2 | ScalarsysQosQueuingMechanism | read-write | current | Queuing mechanism. strictPriority(1) : Strict Priority wrr(2) : Weighted Round Robin Strict-priority scheduling is implemented with a special strict-priority s… |
| 1.3.6.1.4.1.171.10.134.2.1.12.3 | NodesysQosPortBase | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.3.1 | TableqosPortBaseTable | not-accessible | current | A list of 802.1p port default priority Entries. |
| 1.3.6.1.4.1.171.10.134.2.1.12.3.1.1 | RowqosPortBaseEntry | not-accessible | current | A list of 802.1p port default priority priorities. |
| 1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.1 | ColumnqosPortBasePortIndex | read-only | current | A port identifier that is in the range of 1 to ifNumber. |
| 1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.2 | ColumnqosPortBasePriority | read-write | current | For ingress packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. |
| 1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.3 | ColumnqosPortBaseEffectivePriority | read-only | current | For ingress packets, the per port 'Effective Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. |
| 1.3.6.1.4.1.171.10.134.2.1.12.4 | NodesysQos1p | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.4.1 | TableqosTrafficClassTable | not-accessible | current | A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. |
| 1.3.6.1.4.1.171.10.134.2.1.12.4.1.1 | RowqosTrafficClassEntry | not-accessible | current | User Priority to Traffic Class mapping. |
| 1.3.6.1.4.1.171.10.134.2.1.12.4.1.1.1 | ColumnqosTrafficClassPriority | read-only | current | The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated … |
| 1.3.6.1.4.1.171.10.134.2.1.12.4.1.1.2 | ColumnqosTrafficClass | read-only | current | The Traffic Class the received frame is mapped to. |
| 1.3.6.1.4.1.171.10.134.2.1.12.5 | NodesysQosScheduling | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.5.1 | TableqosSchedulingClassTable | not-accessible | current | A list of sysQosScheduling. |
| 1.3.6.1.4.1.171.10.134.2.1.12.5.1.1 | RowqosSchedulingClassEntry | not-accessible | current | A list of sysQosScheduling Weight. |
| 1.3.6.1.4.1.171.10.134.2.1.12.5.1.1.1 | ColumnqosSchedulingClassIndex | read-only | current | A index of class 0 ~ 7. |
| 1.3.6.1.4.1.171.10.134.2.1.12.5.1.1.2 | ColumnqosSchedulingWeight | read-only | current | cos weight |
| 1.3.6.1.4.1.171.10.134.2.1.12.6 | NodesysQosDiffServ | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1 | NodeqosDiffServTypeGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.1 | ScalarqosDiffServType00 | read-write | current | DiffServ Type 0 : IP ToS value = 0 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.2 | ScalarqosDiffServType01 | read-write | current | DiffServ Type 01 : IP ToS value = 4 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.3 | ScalarqosDiffServType02 | read-write | current | DiffServ Type 02 : IP ToS value = 8 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.4 | ScalarqosDiffServType03 | read-write | current | DiffServ Type 03 : IP ToS value = 12 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.5 | ScalarqosDiffServType04 | read-write | current | DiffServ Type 04 : IP ToS value = 16 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.6 | ScalarqosDiffServType05 | read-write | current | DiffServ Type 05 : IP ToS value = 20 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.7 | ScalarqosDiffServType06 | read-write | current | DiffServ Type 06 : IP ToS value = 24 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.8 | ScalarqosDiffServType07 | read-write | current | DiffServ Type 07 : IP ToS value = 28 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.9 | ScalarqosDiffServType08 | read-write | current | DiffServ Type 08 : IP ToS value = 32 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.10 | ScalarqosDiffServType09 | read-write | current | DiffServ Type 09 : IP ToS value = 36 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.11 | ScalarqosDiffServType10 | read-write | current | DiffServ Type 10 : IP ToS value = 40 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.12 | ScalarqosDiffServType11 | read-write | current | DiffServ Type 11 : IP ToS value = 44 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.13 | ScalarqosDiffServType12 | read-write | current | DiffServ Type 12 : IP ToS value = 48 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.14 | ScalarqosDiffServType13 | read-write | current | DiffServ Type 13 : IP ToS value = 52 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.15 | ScalarqosDiffServType14 | read-write | current | DiffServ Type 14 : IP ToS value = 56 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.16 | ScalarqosDiffServType15 | read-write | current | DiffServ Type 15 : IP ToS value = 60 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.17 | ScalarqosDiffServType16 | read-write | current | DiffServ Type 16 : IP ToS value = 64 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.18 | ScalarqosDiffServType17 | read-write | current | DiffServ Type 17 : IP ToS value = 68 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.19 | ScalarqosDiffServType18 | read-write | current | DiffServ Type 18 : IP ToS value = 72 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.20 | ScalarqosDiffServType19 | read-write | current | DiffServ Type 19 : IP ToS value = 76 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.21 | ScalarqosDiffServType20 | read-write | current | DiffServ Type 20 : IP ToS value = 80 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.22 | ScalarqosDiffServType21 | read-write | current | DiffServ Type 21 : IP ToS value = 84 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.23 | ScalarqosDiffServType22 | read-write | current | DiffServ Type 22 : IP ToS value = 88 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.24 | ScalarqosDiffServType23 | read-write | current | DiffServ Type 23 : IP ToS value = 92 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.25 | ScalarqosDiffServType24 | read-write | current | DiffServ Type 24 : IP ToS value = 96 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.26 | ScalarqosDiffServType25 | read-write | current | DiffServ Type 25 : IP ToS value = 100 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.27 | ScalarqosDiffServType26 | read-write | current | DiffServ Type 26 : IP ToS value = 104 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.28 | ScalarqosDiffServType27 | read-write | current | DiffServ Type 27 : IP ToS value = 108 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.29 | ScalarqosDiffServType28 | read-write | current | DiffServ Type 28 : IP ToS value = 112 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.30 | ScalarqosDiffServType29 | read-write | current | DiffServ Type 29 : IP ToS value = 116 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.31 | ScalarqosDiffServType30 | read-write | current | DiffServ Type 30 : IP ToS value = 120 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.32 | ScalarqosDiffServType31 | read-write | current | DiffServ Type 31 : IP ToS value = 124 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.33 | ScalarqosDiffServType32 | read-write | current | DiffServ Type 32 : IP ToS value = 128 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.34 | ScalarqosDiffServType33 | read-write | current | DiffServ Type 33 : IP ToS value = 132 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.35 | ScalarqosDiffServType34 | read-write | current | DiffServ Type 34 : IP ToS value = 136 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.36 | ScalarqosDiffServType35 | read-write | current | DiffServ Type 35 : IP ToS value = 140 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.37 | ScalarqosDiffServType36 | read-write | current | DiffServ Type 36 : IP ToS value = 144 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.38 | ScalarqosDiffServType37 | read-write | current | DiffServ Type 37 : IP ToS value = 148 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.39 | ScalarqosDiffServType38 | read-write | current | DiffServ Type 38 : IP ToS value = 152 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.40 | ScalarqosDiffServType39 | read-write | current | DiffServ Type 39 : IP ToS value = 156 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.41 | ScalarqosDiffServType40 | read-write | current | DiffServ Type 40 : IP ToS value = 160 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.42 | ScalarqosDiffServType41 | read-write | current | DiffServ Type 41 : IP ToS value = 164 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.43 | ScalarqosDiffServType42 | read-write | current | DiffServ Type 42 : IP ToS value = 168 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.44 | ScalarqosDiffServType43 | read-write | current | DiffServ Type 43 : IP ToS value = 172 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.45 | ScalarqosDiffServType44 | read-write | current | DiffServ Type 44 : IP ToS value = 176 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.46 | ScalarqosDiffServType45 | read-write | current | DiffServ Type 45 : IP ToS value = 180 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.47 | ScalarqosDiffServType46 | read-write | current | DiffServ Type 46 : IP ToS value = 184 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.48 | ScalarqosDiffServType47 | read-write | current | DiffServ Type 47 : IP ToS value = 188 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.49 | ScalarqosDiffServType48 | read-write | current | DiffServ Type 48 : IP ToS value = 192 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.50 | ScalarqosDiffServType49 | read-write | current | DiffServ Type 49 : IP ToS value = 196 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.51 | ScalarqosDiffServType50 | read-write | current | DiffServ Type 50 : IP ToS value = 200 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.52 | ScalarqosDiffServType51 | read-write | current | DiffServ Type 51 : IP ToS value = 204 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.53 | ScalarqosDiffServType52 | read-write | current | DiffServ Type 52 : IP ToS value = 208 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.54 | ScalarqosDiffServType53 | read-write | current | DiffServ Type 53 : IP ToS value = 212 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.55 | ScalarqosDiffServType54 | read-write | current | DiffServ Type 54 : IP ToS value = 216 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.56 | ScalarqosDiffServType55 | read-write | current | DiffServ Type 55 : IP ToS value = 220 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.57 | ScalarqosDiffServType56 | read-write | current | DiffServ Type 56 : IP ToS value = 224 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.58 | ScalarqosDiffServType57 | read-write | current | DiffServ Type 57 : IP ToS value = 228 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.59 | ScalarqosDiffServType58 | read-write | current | DiffServ Type 58 : IP ToS value = 232 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.60 | ScalarqosDiffServType59 | read-write | current | DiffServ Type 59 : IP ToS value = 236 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.61 | ScalarqosDiffServType60 | read-write | current | DiffServ Type 60 : IP ToS value = 240 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.62 | ScalarqosDiffServType61 | read-write | current | DiffServ Type 61 : IP ToS value = 244 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.63 | ScalarqosDiffServType62 | read-write | current | DiffServ Type 62 : IP ToS value = 248 |
| 1.3.6.1.4.1.171.10.134.2.1.12.6.1.64 | ScalarqosDiffServType63 | read-write | current | DiffServ Type 63 : IP ToS value = 252 |
| 1.3.6.1.4.1.171.10.134.2.1.13 | NodecompanyTrafficMgmt | |||
| 1.3.6.1.4.1.171.10.134.2.1.13.1 | NodesysBandwidthCtrlSettings | |||
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2 | TablebandwidthCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1 | RowbandwidthCtrlEntry | not-accessible | current | An entry appears in this table for each physical interface in the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.1 | ColumnbandwidthCtrlIndex | read-only | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.2 | ColumnbandwidthCtrlTxThreshold | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.3 | ColumnbandwidthCtrlEffectiveTxThreshold | read-only | current | Configures the new interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interfac… |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.4 | ColumnbandwidthCtrlRxThreshold | read-write | current | Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to… |
| 1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.5 | ColumnbandwidthCtrlEffectiveRxThreshold | read-only | current | Allows to configure the new limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this objec… |
| 1.3.6.1.4.1.171.10.134.2.1.13.4 | NodesysTrafficCtrlSettings | |||
| 1.3.6.1.4.1.171.10.134.2.1.13.4.1 | ScalartrafficCtrlTrap | read-write | current | The trap setting of traffic control. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2 | TabletrafficCtrlTable | not-accessible | current | The traffic control table. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1 | RowtrafficCtrlEntry | not-accessible | current | The traffic control entry. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.1 | ColumntrafficCtrlIndex | read-only | current | The traffic control index. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.2 | ColumntrafficCtrlActionMode | read-write | current | The action mode of traffic control. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.3 | ColumntrafficCtrlType | read-write | current | The control type of traffic control. (b: Broadcast, m: Multicast, u: Unknown Unicast) |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.4 | ColumntrafficCtrlThreshold | read-write | current | The threshold of traffic control. In drop mode,threshold should be times of 64,its range is 64 to 1000000,unit is kbps In Shutdown mode,threshold's range is 1 … |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.5 | ColumntrafficCtrlCountDown | read-write | current | The count down value of traffic control. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.6 | ColumntrafficCtrlTimeInterval | read-write | current | The time interval of traffic control. |
| 1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.7 | ColumntrafficCtrlPortState | read-only | current | The Traffic control port status in shutdown mode. |
| 1.3.6.1.4.1.171.10.134.2.1.13.5 | NodesysStormCtrlTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.13.5.0 | NodestormCtrlTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.13.5.0.1 | NotificationstormOccurred | current | when storm event occur on the port ,it will send out storm occured snmp trap to snmp manager. | |
| 1.3.6.1.4.1.171.10.134.2.1.13.5.0.2 | NotificationstormCleared | current | when storm event cleared on the port, it will send out a storm cleared snmp trap to snmp manager. | |
| 1.3.6.1.4.1.171.10.134.2.1.14 | NodecompanySecurity | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.2 | NodesysPortSecurity | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1 | TableportSecurityTable | not-accessible | current | A table to control port security features of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1.1 | RowportSecurityEntry | not-accessible | current | An entry appears in port security table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.1 | ColumnportSecurityIndex | read-only | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.2 | ColumnportSecurityState | read-write | current | Enable / disable port security admin state for the interface. A given ports' dynamic MAC address learning will be stopped such that the current source MAC addr… |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.3 | ColumnportSecurityMLA | read-write | current | Configures interface port security maximum learning address numbers. When given ports' admin state is enabled, allows forwarding table learning address number.… |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.4 | ColumnportSecurityLockAddrMode | read-write | current | Configures port security lock address mode for the interface. deleteOnReset : The locked addresses will not age out until the Switch has been reset. deleteOnTi… |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2 | TableportSecFDBPermanentTable | not-accessible | current | A table to control port security FDB Permanent of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1 | RowportSecFDBPermanentEntry | not-accessible | current | An entry appears in port security table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.1 | ColumnportSecFDBPermVlanID | read-only | current | The VLAN ID of the port security MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.2 | ColumnportSecFDBPermMac | read-only | current | The MAC address associated of the port security MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.3 | ColumnportSecFDBPermPort | read-only | current | The forwarding port of the port security MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.4 | ColumnportSecFDBPermType | read-only | current | This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it … |
| 1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.5 | ColumnportSecFDBPermEntryState | read-write | current | This object indicates the status of Port Security entry when the value of this boject is setted to false ,this specific enntry will be delete form dynamic FDB … |
| 1.3.6.1.4.1.171.10.134.2.1.14.9 | NodesysTrafficSegmentation | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.9.1 | TabletrafficSegmentationTable | not-accessible | current | A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. Th… |
| 1.3.6.1.4.1.171.10.134.2.1.14.9.1.1 | RowtrafficSegmentationEntry | not-accessible | current | There is one entry in this table for each created port-channel port |
| 1.3.6.1.4.1.171.10.134.2.1.14.9.1.1.1 | ColumntrafficSegmentationIfIndex | read-only | current | The ifIndex of the port-channel(Aggregator's interface index). |
| 1.3.6.1.4.1.171.10.134.2.1.14.9.1.1.2 | ColumntrafficSegmentationMemberList | read-write | current | Port list of port channel. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11 | NodesysSecurityAAC | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.11.1 | ScalaraacAuthenAdminState | read-write | current | This object indicates the Access Authentication is enable or disable. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.2 | ScalaraacAuthParamResponseTimeout | read-write | current | Timeout in second for login authentication response. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.3 | ScalaraacAuthParamAttempt | read-write | current | The amount for login authentication, if login failure exceed, connection or access would be locked. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.4 | ScalaraacLocalEnablePassword | read-write | current | This object is used to set Local Enable Password. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5 | NodeaacAPAuthMethodGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.1 | NodeaacAPLoginMethod | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.1.2 | ScalaraacAPTelnetLoginMethod | read-write | current | Specify the way which has to execute authentication while login the system and the method for authentication.Access system via telnet. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.1.4 | ScalaraacAPHttpLoginMethod | read-write | current | Specify the way which has to execute authentication while login the system and the method for authentication.Access system via HTTP. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.2 | NodeaacAPEnableMethod | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.2.2 | ScalaraacAPTelnetEnableMethod | read-write | current | Specify the way which has to execute authentication while login the system and the method for authentication.Access system via telnet. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.5.2.4 | ScalaraacAPHttpEnableMethod | read-write | current | Specify the way which has to execute authentication while login the system and the method for authentication.Access system via HTTP. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6 | TableaacLoginMethodListTable | not-accessible | current | A table that contains information about Login authentication method lists. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1 | RowaacLoginMethodListEntry | not-accessible | current | A list of the Authentication methods. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.1 | ColumnaacLoginMethodListName | read-only | current | A human-readable text string of the method list. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.2 | ColumnaacLoginMethod1 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.3 | ColumnaacLoginMethod2 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.4 | ColumnaacLoginMethod3 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.5 | ColumnaacLoginMethod4 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.6 | ColumnaacLoginMethodListRowStatus | read-write | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7 | TableaacEnableMethodListTable | not-accessible | current | A table that contains information about Enable authentication method lists. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1 | RowaacEnableMethodListEntry | not-accessible | current | A list of the Authentication methods. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.1 | ColumnaacEnableMethodListName | read-only | current | A human-readable text string of the method list. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.2 | ColumnaacEnableMethod1 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.3 | ColumnaacEnableMethod2 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.4 | ColumnaacEnableMethod3 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.5 | ColumnaacEnableMethod4 | read-write | current | The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.6 | ColumnaacEnableMethodListRowStatus | read-write | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.8 | TableaacServerGroupTable | not-accessible | current | A table that contains informations about server group. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.8.1 | RowaacServerGroupEntry | not-accessible | current | A list of the group including servers. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.1 | ColumnaacServerGroupName | read-only | current | A human-readable text string of the method group. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.2 | ColumnaacServersInGroup | read-write | current | The list of servers in the group, each bit indicates a specified server ID. The server must be created before including it. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.3 | ColumnaacServerGroupRowStatus | read-write | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9 | TableaacServerInfoTable | not-accessible | current | A table that contains information about radius severs. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1 | RowaacServerInfoEntry | not-accessible | current | A list of the information of server . |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.1 | ColumnaacServerIPType | read-only | current | The IP address of the radius AAC server IP type referred to in this table entry. (IPv4=1, IPv6=2) |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.2 | ColumnaacServerIPAddr | read-only | current | The IP address of radius Server |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.3 | ColumnaacServerIndex | read-only | current | A value that uniquely identifies this SwAACServerGroupEntry. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.4 | ColumnaacServerInterfaceName | read-write | current | Specifies the interface name when the aacServerIPAddr is linklocal address. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.5 | ColumnaacServerAuthPort | read-write | current | The TCP/IP port . |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.6 | ColumnaacServerAuthKey | read-write | current | The key used while authentication process. |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.7 | ColumnaacServerTimeout | read-write | current | radius Server response timeout . |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.8 | ColumnaacServerRetryCount | read-write | current | Client retry count . (-1: No retry mechanism) |
| 1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.9 | ColumnaacServerRowStatus | read-write | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.171.10.134.2.1.14.12 | NodesysPortSecurityTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.12.0 | NodeportSecurityTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.12.0.1 | NotificationportSecurityViolation | current | System SHOULD send out a trap message in violation that the learning entries exceeds the max learning address set of port security. | |
| 1.3.6.1.4.1.171.10.134.2.1.14.13 | NodesysTrustedHost | |||
| 1.3.6.1.4.1.171.10.134.2.1.14.13.1 | ScalartrustedHostStatus | read-write | current | This object indicates trusted host function is enabled or disabled. When trusted host function is enabled, Smart Switches will only allow hosts which you trust… |
| 1.3.6.1.4.1.171.10.134.2.1.14.13.2 | TabletrustedHostTable | not-accessible | current | A table to configure IP authorized managers in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.14.13.2.1 | RowtrustedHostEntry | not-accessible | current | Each entry in this table represents rules for particular IP authorized manager. |
| 1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.1 | ColumntrustedHostIpAddr | read-only | current | Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'. |
| 1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.2 | ColumntrustedHostIpMask | read-only | current | Used to mask with IP address, it allow you set a subnet as a trusted host entry. |
| 1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.3 | ColumntrustedHostRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.15 | NodecompanyArp | |||
| 1.3.6.1.4.1.171.10.134.2.1.15.1 | NodesysArp | |||
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1 | TablearpTable | not-accessible | current | A table that contains ARP infomation |
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1.1 | RowarpEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.1 | ColumnarpIpAddr | read-only | current | The IpAddress corresponding to the Mac Address. |
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.2 | ColumnarpMacAddress | read-write | current | Ethernet Mac Address. |
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.3 | ColumnarpType | read-write | current | The type of ARP mapping entry. |
| 1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.4 | ColumnarpRowStatus | read-write | current | The status of an entry in the ARP Table. A conceptual row can not be made active until the arpMacAddress object has been set. |
| 1.3.6.1.4.1.171.10.134.2.1.15.2 | ScalarcmArpClear | read-write | current | clear action type: none(0), clearAll(1), cleatAllStatic, clearAllDynamic, Initial its value is 0, and after each action, it will reset to 0 |
| 1.3.6.1.4.1.171.10.134.2.1.16 | NodecompanySyslog | |||
| 1.3.6.1.4.1.171.10.134.2.1.16.1 | NodesyslogSettingGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.16.1.1 | ScalarsyslogEnable | read-write | current | This object is for enabling or disabling syslog alert features in the system and the syslog will save to flash or send to remote syslog server. System Logs rec… |
| 1.3.6.1.4.1.171.10.134.2.1.16.1.2 | ScalarsyslogSaveMode | read-write | current | This object is for choosing the method to save syslog into flash. |
| 1.3.6.1.4.1.171.10.134.2.1.16.1.3 | ScalarsyslogSaveMinutes | read-write | current | When savemode is time interval, it's used to set the interval minutes of system save syslog to flash. |
| 1.3.6.1.4.1.171.10.134.2.1.16.1.4 | ScalarsyslogClearLog | read-write | current | Clears the buffered logs. This object is set to 'false' by default. When set to 'True', the buffered logs will be cleared and the value of this object will bec… |
| 1.3.6.1.4.1.171.10.134.2.1.16.3 | NodesyslogServerGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1 | TablesyslogServTable | not-accessible | current | The table of syslog remote server. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1 | RowsyslogServEntry | not-accessible | current | The list of syslog remote server entry. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.1 | ColumnsyslogServIndex | read-only | current | The index of syslog remote server. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.2 | ColumnsyslogServAddrType | read-write | current | Specifies the Address type of server.Address type shall be ipv4 or ipv6. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.3 | ColumnsyslogServAddr | read-write | current | Specifies the ServerIP to which the syslog shall be forwarded. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.5 | ColumnsyslogServSeverity | read-write | current | Specifies the log level option to be set for a specific server. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.6 | ColumnsyslogServFacility | read-write | current | The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.7 | ColumnsyslogServUDPport | read-write | current | The value is for setting UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.8 | ColumnsyslogServSrvStatus | read-write | current | The status for this server. If enable, system will send message to this server. |
| 1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.9 | ColumnsyslogServSrvRowStatus | read-write | current | Row status of this server entry. |
| 1.3.6.1.4.1.171.10.134.2.1.16.4 | NodesyslogMsg | |||
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1 | TablesyslogMsgTable | not-accessible | current | Specifies the number of messages . |
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1.1 | RowsyslogMsgEntry | not-accessible | current | An entry (conceptual row) in the syslogMsgTable. |
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.1 | ColumnsyslogMsgIndex | read-only | current | The auxiliary variable used for identifying instances of the columnar objects in the syslogMsgTable. |
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.2 | ColumnsyslogMsgDescr | read-only | current | A textual description of system log message. |
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.3 | ColumnsyslogMsgTime | read-only | current | time of system log message. |
| 1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.4 | ColumnsyslogMsgSeverity | read-only | current | Severity of system log message. |
| 1.3.6.1.4.1.171.10.134.2.1.17 | NodecompanyLBD | |||
| 1.3.6.1.4.1.171.10.134.2.1.17.1 | ScalarsysLBDStateEnable | read-write | current | Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol … |
| 1.3.6.1.4.1.171.10.134.2.1.17.2 | ScalarsysLBDMode | read-write | current | Loopback detection function mode. |
| 1.3.6.1.4.1.171.10.134.2.1.17.3 | ScalarsysLBDInterval | read-write | current | Set a Loop detection Interval between 1 and 32767 seconds. The default is 2 seconds. This time interval to be used at counting time seconds to resend the CTP p… |
| 1.3.6.1.4.1.171.10.134.2.1.17.4 | ScalarsysLBDRecoverTime | read-write | current | This time interval to be used at counting time seconds to recover the disabled port automatically. The Loop Detection Recover Time can be set at 0 seconds, or … |
| 1.3.6.1.4.1.171.10.134.2.1.17.5 | TablesysLBDCtrlTable | not-accessible | current | A table to control Loopback detection features either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.17.5.1 | RowsysLBDCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.17.5.1.1 | ColumnsysLBDCtrlIndex | read-only | current | The interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.17.5.1.2 | ColumnsysLBDPortStatus | read-write | current | Provides control to per port enable or disable the loopback detection function. Default is disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.17.5.1.3 | ColumnsysLBDPortLoopStatus | read-only | current | The loop status for this port. |
| 1.3.6.1.4.1.171.10.134.2.1.17.6 | TablesysLBDVlanLoopTable | not-accessible | current | A table to display Loopback detection features by vlan mode . |
| 1.3.6.1.4.1.171.10.134.2.1.17.6.1 | RowsysLBDVlanLoopEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.17.6.1.1 | ColumnsysLBDVlanLoopIndex | read-only | current | Display port lists loop status by vlan. |
| 1.3.6.1.4.1.171.10.134.2.1.17.6.1.2 | ColumnsysLBDVlanLoopPorts | read-only | current | Display port lists loop status by vlan. |
| 1.3.6.1.4.1.171.10.134.2.1.17.7 | ScalarsysLBDEnabledVlanList | read-write | current | This object indicates the VLANs that enabled LBD. Note: For the LBD enabled VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or … |
| 1.3.6.1.4.1.171.10.134.2.1.17.8 | NodesysLBDTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.17.8.0 | NodelbdTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.17.8.0.1 | NotificationloopbackOccur | current | A loopbackOccur notification is sent when loop found. | |
| 1.3.6.1.4.1.171.10.134.2.1.17.8.0.2 | NotificationloopbackRecovery | current | A loopbackRecovery notification is sent when recovery time comes to end. | |
| 1.3.6.1.4.1.171.10.134.2.1.18 | NodecompanyMirror | |||
| 1.3.6.1.4.1.171.10.134.2.1.18.1 | ScalarsysMirrorStatus | read-write | current | Enable/Disable Port Mirroring function. Default is disabled. Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and… |
| 1.3.6.1.4.1.171.10.134.2.1.18.2 | TablesysMirrorPortTable | not-accessible | current | Provides control to enable or disable mirroring of ingress or Egress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1 | RowmirrorPortEntry | not-accessible | current | Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1.1 | ColumnmirrorTargetIfIndex | read-only | current | Specifies the port to which the mirrored traffic in the system is to be copied. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1.2 | ColumnmirrorTargetPort | read-write | current | Specifies the port to which the mirrored traffic in the system is to be copied. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1.3 | ColumnmirrorIngressPortList | read-write | current | Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1.4 | ColumnmirrorEgressPortList | read-write | current | Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.171.10.134.2.1.18.2.1.5 | ColumnmirrorCtrlRowStatus | read-write | current | Specifies the validity of the entry, max entry number is 4. |
| 1.3.6.1.4.1.171.10.134.2.1.19 | NodecompanyStaticMcast | |||
| 1.3.6.1.4.1.171.10.134.2.1.19.1 | TablesysStaticMcastTable | not-accessible | current | A list of the Static MACs |
| 1.3.6.1.4.1.171.10.134.2.1.19.1.1 | RowstaticMcastEntry | not-accessible | current | A Static MAC entry containing the mac and forwarding port. |
| 1.3.6.1.4.1.171.10.134.2.1.19.1.1.1 | ColumnstaticMcastVlanID | read-only | current | The VLAN ID of the static MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.19.1.1.2 | ColumnstaticMcastMac | read-only | current | The MAC address associated of the static MAC entry. |
| 1.3.6.1.4.1.171.10.134.2.1.19.1.1.3 | ColumnstaticMcastEgressPorts | read-only | current | The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of … |
| 1.3.6.1.4.1.171.10.134.2.1.19.1.1.4 | ColumnstaticMcastStatus | read-write | current | The status of an entry in the Static Mcast Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| 1.3.6.1.4.1.171.10.134.2.1.20 | NodecompanySNTPSetting | |||
| 1.3.6.1.4.1.171.10.134.2.1.20.17 | NodesysSNTPSettingGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.20.17.1 | ScalarsntpTimeSeconds | read-write | current | This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 2009). Notice : input value must larger than 284083276 (00:00:00 UTC… |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.8 | ScalarsntpPollInterval | read-write | current | SNTP Poll Interval In Seconds (30-99999) |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.9 | ScalarsntpGlobalState | read-write | current | Enable/Disable SNTP function in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.10 | ScalarsntpDSTOffset | read-write | current | This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes. |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.11 | ScalarsntpGMTMinutes | read-write | current | Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720) |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.12 | ScalarsntpDSTStartTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.13 | ScalarsntpDSTEndTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.171.10.134.2.1.20.17.20 | ScalarsntpDSTState | read-write | current | This object is for Annual(1) or Disabled(2) DST state in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.20.18 | NodesysSNTPServerGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1 | TablesntpServerTable | not-accessible | current | The table contains configured SNTP/NTP servers in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1.1 | RowsntpServerEntry | not-accessible | current | Each entry in the table contains necessary information to send SNTP request to the servers. |
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.1 | ColumnsntpServerAddrType | read-only | current | The IP address type ipv4 or ipv6. |
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.2 | ColumnsntpServerAddr | read-only | current | The unicast IPv4/IPv6 server address in the Unicast Addressing mode |
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.4 | ColumnsntpServerType | read-write | current | In Unicast addressing mode, we can have primary and secondary servers. This flag is to distinguish between primary and secondary server. SNTP client sends requ… |
| 1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.5 | ColumnsntpServerRowStatus | read-write | current | The activation of a row adds server entry. The destruction of a row removes server entry |
| 1.3.6.1.4.1.171.10.134.2.1.22 | NodecompanyRMON | |||
| 1.3.6.1.4.1.171.10.134.2.1.22.1 | ScalarsysRMONGlobalState | read-write | current | This object is for enabling or disabling RMON function. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2 | NodesysRMONStatistics | |||
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1 | TablermonStatsTable | not-accessible | current | A list of Ethernet statistics entries. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1 | RowrmonStatsEntry | not-accessible | current | A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1 |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.1 | ColumnrmonStatsIndex | read-only | current | The value of this object uniquely identifies this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.2 | ColumnrmonStatsDataSource | read-write | current | This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In… |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.3 | ColumnrmonStatsOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.4 | ColumnrmonStatsStatus | read-write | current | The status of this etherStats entry. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.5 | ColumnrmonStatsDropEvents | read-only | current | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets … |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.6 | ColumnrmonStatsOctets | read-only | current | The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can … |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.7 | ColumnrmonStatsPkts | read-only | current | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.8 | ColumnrmonStatsBroadcastPkts | read-only | current | The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. |
| 1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.9 | ColumnrmonStatsMulticastPkts | read-only | current | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3 | NodesysRMONHistory | |||
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1 | TablermonHistoryTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1 | RowrmonHistoryEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyContr… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.1 | ColumnrmonHistoryIndex | read-only | current | An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on t… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.2 | ColumnrmonHistoryDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntr… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.3 | ColumnrmonHistoryBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.4 | ColumnrmonHistoryInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This i… |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.5 | ColumnrmonHistoryOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.6 | ColumnrmonHistoryStatus | read-write | current | The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if thi… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4 | NodesysRMONAlarm | |||
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1 | TablermonAlarmTable | not-accessible | current | A list of alarm entries. |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1 | RowrmonAlarmEntry | not-accessible | current | A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8 |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.1 | ColumnrmonAlarmIndex | read-only | current | An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.2 | ColumnrmonAlarmInterval | read-write | current | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.3 | ColumnrmonAlarmVariable | read-write | current | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter3… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.4 | ColumnrmonAlarmSampleType | read-write | current | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.5 | ColumnrmonAlarmRisingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.6 | ColumnrmonAlarmFallingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.7 | ColumnrmonAlarmRisingEventIndex | read-write | current | The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.8 | ColumnrmonAlarmFallingEventIndex | read-write | current | The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden… |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.9 | ColumnrmonAlarmOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.10 | ColumnrmonAlarmStatus | read-write | current | The status of this alarm entry. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5 | NodesysRMONEvent | |||
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1 | TablermonEventTable | not-accessible | current | A list of events to be generated. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1 | RowrmonEventEntry | not-accessible | current | A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be… |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.1 | ColumnrmonEventIndex | read-only | current | An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.2 | ColumnrmonEventDescription | read-write | current | A comment describing this event entry. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.3 | ColumnrmonEventType | read-write | current | The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-t… |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.4 | ColumnrmonEventCommunity | read-write | current | If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.5 | ColumnrmonEventOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has ass… |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.6 | ColumnrmonEventStatus | read-write | current | The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent. |
| 1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.7 | ColumnrmonEventLastTimeSent | read-only | current | The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero. |
| 1.3.6.1.4.1.171.10.134.2.1.23 | NodecompanyPnacGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.23.1 | NodesysPnacCtrl | |||
| 1.3.6.1.4.1.171.10.134.2.1.23.1.1 | ScalarpnacStatus | read-write | current | Enable/Disable Static 802.1x. |
| 1.3.6.1.4.1.171.10.134.2.1.23.1.2 | ScalarpnacMode | read-write | current | This object indicates the authentication mode of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.23.1.3 | ScalarpnacProtocol | read-write | current | The authentication method used to authenticate users. |
| 1.3.6.1.4.1.171.10.134.2.1.23.1.4 | ScalarpnacRadiusAccountingState | read-write | current | Enable/disable Radius Accounting Settings. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2 | NodesysPnacPortAccessCtrl | |||
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1 | TablepnacPortAccessControlTable | not-accessible | current | A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may auth… |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1 | RowpnacPortAccessControlEntry | not-accessible | current | The configuration information for an Authenticator Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.1 | ColumnpnacConfigPortNumber | read-only | current | A unique value for each port that correlates to port index. Its value ranges between 1 and the value of port number. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.2 | ColumnpnacQuietPeriod | read-write | current | The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.3 | ColumnpnacTxPeriod | read-write | current | The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.4 | ColumnpnacSuppTimeout | read-write | current | The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.5 | ColumnpnacServerTimeout | read-write | current | The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.6 | ColumnpnacMaxReq | read-write | current | The value of the maxReq constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.7 | ColumnpnacReAuthPeriod | read-write | current | The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.8 | ColumnpnacReAuthentication | read-write | current | The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1). |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.9 | ColumnpnacConfigPortControl | read-write | current | The current value of the controlled Port control parameter for the Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.10 | ColumnpnacCapability | read-write | current | The current value of the controlled Port control parameter for the Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.11 | ColumnpnacDirection | read-write | current | The current value of the controlled Port control parameter for the Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.12 | ColumnpnacOperControlledDirections | read-only | current | The current value of the open control Port control parameter for the Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.13 | ColumnpnacPortAuthStatus | read-only | current | The authorized status of the open control Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.3 | NodesysPnacUser | |||
| 1.3.6.1.4.1.171.10.134.2.1.23.3.1 | TablepnacUserTable | not-accessible | current | A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may auth… |
| 1.3.6.1.4.1.171.10.134.2.1.23.3.1.1 | RowpnacUserEntry | not-accessible | current | The configuration information for an Pnacenticator Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.1 | ColumnpnacUserName | read-only | current | The unique index value of a row in this table. This object is used to set 802.1X Local user name, The following characters are allowed to input: semicolon, que… |
| 1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.2 | ColumnpnacUserPassword | read-write | current | This object is used to set 802.1X Local user Password, The following characters are allowed to input: semicolon, question mark, space, and double quotation mar… |
| 1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.3 | ColumnpnacUserStatus | read-write | current | The status of this conceptual row in the pnacUserTable. An entry in this table is not qualified for activation until instances of all corresponding columns hav… |
| 1.3.6.1.4.1.171.10.134.2.1.23.4 | NodesysPnacRadiusServer | |||
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1 | TablepnacRadiusServerTable | not-accessible | current | A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may auth… |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1 | RowpnacRadiusServerEntry | not-accessible | current | The configuration information for an Authenticator Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.1 | ColumnpnacRadiusServerIndex | read-only | current | A unique value for Authentication RADIUS Server index. Its value ranges between 1 and 3. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.2 | ColumnpnacRadiusIPType | read-write | current | The IP address of the RADIUS server IP type referred to in this table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.3 | ColumnpnacRadiusServerAddress | read-write | current | The IP address of the RADIUS server referred to in this table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.5 | ColumnpnacRadiusServerAuthenticationPort | read-write | current | The value is for setting UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.6 | ColumnpnacRadiusServerAccountingPort | read-write | current | The value is for setting UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.7 | ColumnpnacRadiusServerTimeout | read-write | current | The value is for setting UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.8 | ColumnpnacRadiusServerRetransmit | read-write | current | The value is for setting UDP Port. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.9 | ColumnpnacRadiusServerKey | read-write | current | This object is used to set 802.1X Radius Server Key, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark. |
| 1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.10 | ColumnpnacRadiusServerStatus | read-write | current | The status of this conceptual row in the pnacRadiusServerTable. An entry in this table is not qualified for activation until instances of all corresponding col… |
| 1.3.6.1.4.1.171.10.134.2.1.24 | NodecompanyGuestVLAN | |||
| 1.3.6.1.4.1.171.10.134.2.1.24.1 | ScalarsysGuestVlanName | read-write | current | The VLAN name of guest VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.24.2 | ScalarsysGuestVlanPort | read-write | current | This object indicates the guest VLAN port members of this device. |
| 1.3.6.1.4.1.171.10.134.2.1.24.3 | ScalarsysGuestVlanDelState | read-write | current | Used to delete the guest VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.25 | NodecompanyMacNotify | |||
| 1.3.6.1.4.1.171.10.134.2.1.25.1 | ScalarsysMacNotifyState | read-write | current | This object can enabled or disabled MAC Notification. |
| 1.3.6.1.4.1.171.10.134.2.1.25.2 | ScalarsysmacNotifyInterval | read-write | current | This object indicates the time interval in second for trigger the MAC notify message. |
| 1.3.6.1.4.1.171.10.134.2.1.25.3 | ScalarsysmacNotifyHistorySize | read-write | current | This object indicates the history size of variation MAC in address table. The default value is 1 . |
| 1.3.6.1.4.1.171.10.134.2.1.25.4 | TablesysmacNotifyCtrlTable | not-accessible | current | A table to control Loopback detection features either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.25.4.1 | RowmacNotifyCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.25.4.1.1 | ColumnmacNotifyPortIndex | read-only | current | The interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.25.4.1.2 | ColumnmacNotifyPortStatus | read-write | current | Provides control to per port enable or disable the mac notify status function. Default is disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.25.5 | NodesysMacNotifyTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.25.5.1 | NotificationfdbTableChanged | current | A fdbTableChanged notification is sent when dynamic forwarding table add learning mac; also when one device leave, dynamic forwarding table delete one mac,a fd… | |
| 1.3.6.1.4.1.171.10.134.2.1.27 | NodecompanyISMVLAN | |||
| 1.3.6.1.4.1.171.10.134.2.1.27.1 | ScalarsysIGMPMulticastVlanStatus | read-write | current | Enable/Disable IGMP Multicast Vlan function. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2 | TablesysIGMPMulticastVlanTable | not-accessible | current | Information about the IGMP snooping multicast VLAN table. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1 | RowsysIGMPMulticastVlanEntry | not-accessible | current | The entry of sysIGMPMulticastVlanTable. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.1 | ColumnigmpMulticastVlanid | read-only | current | This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.2 | ColumnigmpMulticastVlanAddressType | read-only | current | This object indicates InetAddressType IGS or MLD |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.3 | ColumnigmpMulticastVlanName | read-write | current | This object indicates the VLAN name of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.4 | ColumnigmpMulticastVlanSourcePort | read-write | current | This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and th… |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.5 | ColumnigmpMulticastVlanMemberPort | read-write | current | This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry a… |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.6 | ColumnigmpMulticastVlanTagMemberPort | read-write | current | This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.7 | ColumnigmpMulticastVlanState | read-write | current | This object can be used to enable or disable the IGMP snooping multicast VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.8 | ColumnigmpMulticastVlanReplaceSourceIp | read-write | current | The replacement source IP of this multicast VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.27.2.1.9 | ColumnigmpMulticastVlanRowStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.27.3 | TablesysIGMPMulticastVlanGroupTable | not-accessible | current | The table containing the IGMP snooping multicast VLAN group information |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1 | RowsysIGMPMulticastVlanGroupEntry | not-accessible | current | Information about the current IGMP snooping multicast VLAN group. |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1.1 | ColumnigmpMulticastVlanGroupVid | read-only | current | This object indicates the VID of the IGMP snooping multicast VLAN group. |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1.2 | ColumnigmpMulticastVlanGroupAddressType | read-only | current | This object indicates InetAddressType IGS or MLD |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1.3 | ColumnigmpMulticastVlanGroupFromIp | read-only | current | Specifies the multicast address list for this VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1.4 | ColumnigmpMulticastVlanGroupToIp | read-only | current | Specifies the multicast address list for this VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.27.3.1.5 | ColumnigmpMulticastVlanGroupStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.28 | NodecompanyDHCPRelay | |||
| 1.3.6.1.4.1.171.10.134.2.1.28.1 | NodesysDHCPRelayControl | |||
| 1.3.6.1.4.1.171.10.134.2.1.28.1.1 | ScalardhcpRelayState | read-write | current | This object indicates DHCP relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.28.1.2 | ScalardhcpRelayHopCount | read-write | current | This object indicates the maximum number of router hops that the BOOTP packets can cross. |
| 1.3.6.1.4.1.171.10.134.2.1.28.1.3 | ScalardhcpRelayTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP … |
| 1.3.6.1.4.1.171.10.134.2.1.28.2 | NodesysDHCPRelayManagement | |||
| 1.3.6.1.4.1.171.10.134.2.1.28.2.1 | TabledhcpRelayInterfaceSettingsTable | not-accessible | current | This table indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.1.1 | RowdhcpRelayInterfaceSettingsEntry | not-accessible | current | A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.1 | ColumndhcpRelayServerIP | read-only | current | This object indicates the DHCP server IP address. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.2 | ColumndhcpRelayInterface | read-only | current | This object indicates the input Interface Index value mapped to this Server Address Table. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.3 | ColumndhcpRelayInterfaceSettingsRowStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2 | NodedhcpRelayManagermentOption82 | |||
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2.1 | ScalardhcpRelayOption82State | read-write | current | Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a p… |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2.2 | ScalardhcpRelayOption82CheckState | read-write | current | This object indicates DHCP relay option 82 Check function is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2.3 | ScalardhcpRelayOption82Policy | read-write | current | This object indicates DHCP relay option 82 policy. |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2.4 | ScalardhcpRelayOption82RemoteIDType | read-write | current | This object indicates the type of remote ID. If the type is default, the remote ID will be the MAC address of the device, otherwise, the remote ID can be defin… |
| 1.3.6.1.4.1.171.10.134.2.1.28.2.2.5 | ScalardhcpRelayOption82RemoteID | read-write | current | This object displays the current remote ID of the device. If DHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device, … |
| 1.3.6.1.4.1.171.10.134.2.1.29 | NodecompanyDHCPLocalRelay | |||
| 1.3.6.1.4.1.171.10.134.2.1.29.1 | ScalarsysDHCPLocalRelayGlobalState | read-write | current | This object indicates DHCP local relay function is enabled or disabled globally. |
| 1.3.6.1.4.1.171.10.134.2.1.29.2 | TablesysDHCPLocalRelayTable | not-accessible | current | This table indicates the IP address as a destination to forward (local relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.29.2.1 | RowdhcpLocalRelayEntry | not-accessible | current | A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.29.2.1.1 | ColumndhcpLocalRelayVlanId | read-only | current | This object displays the current VLAN ID of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.29.2.1.2 | ColumndhcpLocalRelayState | read-write | current | This object indicates DHCP local relay function of VLAN is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.31 | NodecompanyGreenSetting | |||
| 1.3.6.1.4.1.171.10.134.2.1.31.1 | NodesysGreenLEDShutoff | |||
| 1.3.6.1.4.1.171.10.134.2.1.31.1.1 | ScalargreenLEDShutoffPortList | read-write | current | Provides control to LED port. |
| 1.3.6.1.4.1.171.10.134.2.1.31.1.2 | ScalargreenLEDShutoffState | read-write | current | Enable/Disable Green LED function. Default is disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.31.1.3 | ScalargreenLEDShutoffTimeProfile1 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.1.4 | ScalargreenLEDShutoffTimeProfile2 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.2 | NodesysGreenPortShutoff | |||
| 1.3.6.1.4.1.171.10.134.2.1.31.2.1 | ScalargreenPortShutoffPortList | read-write | current | Provides control to LED port. |
| 1.3.6.1.4.1.171.10.134.2.1.31.2.2 | ScalargreenPortShutoffState | read-write | current | Enable/Disable Green LED function. Default is disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.31.2.3 | ScalargreenPortShutoffTimeProfile1 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.2.4 | ScalargreenPortShutoffTimeProfile2 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.4 | NodesysGreenSystemHibernation | |||
| 1.3.6.1.4.1.171.10.134.2.1.31.4.1 | ScalargreenSystemHibernationState | read-write | current | Enable/Disable Green LED function. Default is disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.31.4.2 | ScalargreenSystemHibernationTimeProfile1 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.4.3 | ScalargreenSystemHibernationTimeProfile2 | read-write | current | The time profile name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.31.5 | ScalargreenCableLenDetectionState | read-write | current | Enable/Disable Power Saving Cable Length Detection. |
| 1.3.6.1.4.1.171.10.134.2.1.32 | NodecompanyLLDP | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.1 | ScalarsysLLDPState | read-write | current | This object is used for enabling or disabling LLDP in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.2 | ScalarsysLLDPMsgHoldMultiplier | read-write | current | The time-to-live value expressed as a multiple of the lldpMessageTxInterval object.The actual time-to-live value used in LLDP frames, transmitted on behalf of … |
| 1.3.6.1.4.1.171.10.134.2.1.32.3 | ScalarsysLLDPMsgTxInterval | read-write | current | This object is used for LLDP packet update frequency. The timer in units of seconds. |
| 1.3.6.1.4.1.171.10.134.2.1.32.4 | ScalarsysLLDPReinitDelay | read-write | current | This object is used for LLDP Reinitialization Delay. The timer in units of seconds. |
| 1.3.6.1.4.1.171.10.134.2.1.32.5 | ScalarsysLLDPTxDelay | read-write | current | The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local syste… |
| 1.3.6.1.4.1.171.10.134.2.1.32.6 | TablesysLLDPConfigManAddrTable | not-accessible | current | The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.6.1 | RowsysLLDPConfigManAddrEntry | not-accessible | current | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transm… |
| 1.3.6.1.4.1.171.10.134.2.1.32.6.1.1 | ColumnlldpConfigManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. |
| 1.3.6.1.4.1.171.10.134.2.1.32.6.1.2 | ColumnlldpConfigManAddr | read-only | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.3.6.1.4.1.171.10.134.2.1.32.6.1.3 | ColumnlldpConfigManAddrPortsTxEnable | read-write | current | A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will b… |
| 1.3.6.1.4.1.171.10.134.2.1.32.11 | TablesysLLDPPortConfigTable | not-accessible | current | The table that controls LLDP frame transmission on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.11.1 | RowsysLLDPPortConfigEntry | not-accessible | current | LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports wh… |
| 1.3.6.1.4.1.171.10.134.2.1.32.11.1.1 | ColumnlldpPortConfigPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.11.1.2 | ColumnlldpPortConfigAdminStatus | read-write | current | The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent wil… |
| 1.3.6.1.4.1.171.10.134.2.1.32.11.1.3 | ColumnlldpPortConfigNotificationEnable | read-write | current | The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notif… |
| 1.3.6.1.4.1.171.10.134.2.1.32.11.1.4 | ColumnlldpPortConfigTLVsTxEnable | read-write | current | The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network m… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12 | NodesysLLDPXdot3Objects | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.12.1 | NodelldpXdot3Config | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.12.1.1 | TablelldpXdot3PortConfigTable | not-accessible | current | A table that controls selection of LLDP TLVs to be transmitted on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1 | RowlldpXdot3PortConfigEntry | not-accessible | current | LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. Each active lldpX… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1.1 | ColumnlldpXdot3PortConfigPortNum | read-write | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1.2 | ColumnlldpXdot3PortConfigTLVsTxEnable | read-write | current | The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on th… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2 | NodelldpXdot3LocalData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1 | TablelldpXdot3LocPortTable | not-accessible | current | This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agen… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1 | RowlldpXdot3LocPortEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.1 | ColumnlldpXdot3LocPortNum | read-write | current | The value of this object is used as a port index to the lldpXdot3LocPortTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.2 | ColumnlldpXdot3LocPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.3 | ColumnlldpXdot3LocPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.4 | ColumnlldpXdot3LocPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the l… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.5 | ColumnlldpXdot3LocPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list po… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.4 | TablelldpXdot3LocMaxFrameSizeTable | not-accessible | current | This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1 | RowlldpXdot3LocMaxFrameSizeEntry | not-accessible | current | Maximum Frame Size information about a particular port component. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1.1 | ColumnlldpXdot3LocMaxFrameSizePortNum | read-write | current | The value of this object is used as a port index to the lldpXdot3LocMaxFrameSizeTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1.2 | ColumnlldpXdot3LocMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the given port of the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3 | NodelldpXdot3RemoteData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1 | TablelldpXdot3RemPortTable | not-accessible | current | This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1 | RowlldpXdot3RemPortEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.1 | ColumnlldpXdot3RemTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.2 | ColumnlldpXdot3RemLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortN… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.3 | ColumnlldpXdot3RemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.4 | ColumnlldpXdot3RemPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.5 | ColumnlldpXdot3RemPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.6 | ColumnlldpXdot3RemPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the r… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.7 | ColumnlldpXdot3RemPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the co… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2 | TablelldpXdot3RemPowerTable | not-accessible | current | This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1 | RowlldpXdot3RemPowerEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.1 | ColumnlldpXdot3RemPowerTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.2 | ColumnlldpXdot3RemPowerLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortN… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.3 | ColumnlldpXdot3RemPowerIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.4 | ColumnlldpXdot3RemPowerPortClass | read-only | current | The value that identifies the port Class of the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.5 | ColumnlldpXdot3RemPowerMDISupported | read-only | current | The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.6 | ColumnlldpXdot3RemPowerMDIEnabled | read-only | current | The truth value used to identify whether MDI power is enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.7 | ColumnlldpXdot3RemPowerPairControlable | read-only | current | The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair sel… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.8 | ColumnlldpXdot3RemPowerPairs | read-only | current | This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.9 | ColumnlldpXdot3RemPowerClass | read-only | current | This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3 | TablelldpXdot3RemLinkAggTable | not-accessible | current | This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1 | RowlldpXdot3RemLinkAggEntry | not-accessible | current | Link Aggregation information about remote system's port component. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.1 | ColumnlldpXdot3RemLinkAggTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.2 | ColumnlldpXdot3RemLinkAggLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortN… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.3 | ColumnlldpXdot3RemLinkAggIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.4 | ColumnlldpXdot3RemLinkAggStatus | read-only | current | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.5 | ColumnlldpXdot3RemLinkAggPortId | read-only | current | This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4 | TablelldpXdot3RemMaxFrameSizeTable | not-accessible | current | This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1 | RowlldpXdot3RemMaxFrameSizeEntry | not-accessible | current | Maximum Frame Size information about a particular port component. |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.1 | ColumnlldpXdot3RemMaxFrameSizeTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.2 | ColumnlldpXdot3RemMaxFrameSizeLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortN… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.3 | ColumnlldpXdot3RemMaxFrameSizeIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.4 | ColumnlldpXdot3RemMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13 | NodesysLLDPXdot1Objects | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1 | NodelldpXdot1Config | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.1 | TablelldpXdot1ConfigPortVlanTable | not-accessible | current | A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1 | RowlldpXdot1ConfigPortVlanEntry | not-accessible | current | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission capable ports. Each … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1.1 | ColumnlldpXdot1ConfigVlanPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1.2 | ColumnlldpXdot1ConfigPortVlanTxEnable | read-write | current | The lldpXdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organization… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.2 | TablelldpXdot1ConfigVlanNameTable | not-accessible | current | The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1 | RowlldpXdot1ConfigVlanNameEntry | not-accessible | current | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance will be transmitted. Ea… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.1 | ColumnlldpXdot1LocConfigVlanNamePortNum | read-only | current | The value of this object is used as a port index to the lldpXdot3LocPortTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.2 | ColumnlldpXdot1ConfigVlanId | read-only | current | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.3 | ColumnlldpXdot1ConfigVlanNameTxEnable | read-write | current | The boolean value that indicates whether the corresponding Local System VLAN name instance will be transmitted on the port defined by the given lldpXdot1LocVla… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.4 | TablelldpXdot1ConfigProtocolTable | not-accessible | current | The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1 | RowlldpXdot1ConfigProtocolEntry | not-accessible | current | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted. Eac… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.1 | ColumnlldpXdot1ConfigProtocolPortNum | read-only | current | The value of this object is used as a port index to the lldpXdot1ConfigProtocolTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.2 | ColumnlldpXdot1ConfigProtocolIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.3 | ColumnlldpXdot1ConfigProtocolTxEnable | read-write | current | The boolean value that indicates whether the corresponding Local System Protocol Identity instance will be transmitted on the port defined by the given lldpXdo… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2 | NodelldpXdot1LocalData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.1 | TablelldpXdot1LocTable | not-accessible | current | This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1 | RowlldpXdot1LocEntry | not-accessible | current | Information about IEEE 802.1 organizationally defined LLDP extension. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1.1 | ColumnlldpXdot1LocPortNum | read-only | current | The value of this object is used as a port index to the lldpXdot1LocTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1.2 | ColumnlldpXdot1LocPortVlanId | read-only | current | The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not kno… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.3 | TablelldpXdot1LocVlanNameTable | not-accessible | current | This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1 | RowlldpXdot1LocVlanNameEntry | not-accessible | current | VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1LocVlanId, configured on the given po… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.1 | ColumnlldpXdot1LocVlanNamePortNum | read-only | current | The value of this object is used as a port index to the lldpXdot1LocVlanNameTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.2 | ColumnlldpXdot1LocVlanId | read-only | current | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.3 | ColumnlldpXdot1LocVlanName | read-only | current | The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.4 | TablelldpXdot1LocProtocolTable | not-accessible | current | This table contains one or more rows per protocol identity information on the local system known to this agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1 | RowlldpXdot1LocProtocolEntry | not-accessible | current | Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpXdot… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.1 | ColumnlldpXdot1LocProtocolPortNum | read-write | current | The value of this object is used as a port index to the lldpXdot1LocProtocolTable. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.2 | ColumnlldpXdot1LocProtocolIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.3 | ColumnlldpXdot1LocProtocolId | read-only | current | The octet string value used to identify the protocols associated with the given port of the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3 | NodelldpXdot1RemoteData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1 | TablelldpXdot1RemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXdot1RemEntry is prese… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1 | RowlldpXdot1RemEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.1 | ColumnlldpXdot1RemTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.2 | ColumnlldpXdot1RemLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemLocalPortNu… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.3 | ColumnlldpXdot1RemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.4 | ColumnlldpXdot1RemPortVlanId | read-only | current | The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2 | TablelldpXdot1RemProtoVlanTable | not-accessible | current | This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1 | RowlldpXdot1RemProtoVlanEntry | not-accessible | current | Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpXdot1RemProtoVl… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.1 | ColumnlldpXdot1RemProtoVlanTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.2 | ColumnlldpXdot1RemProtoVlanLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemLocalPortNu… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.3 | ColumnlldpXdot1RemProtoVlanIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.4 | ColumnlldpXdot1RemProtoVlanId | not-accessible | current | The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.5 | ColumnlldpXdot1RemProtoVlanSupported | read-only | current | The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.6 | ColumnlldpXdot1RemProtoVlanEnabled | read-only | current | The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3 | TablelldpXdot1RemVlanNameTable | not-accessible | current | This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1 | RowlldpXdot1RemVlanNameEntry | not-accessible | current | VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1RemVlanId, received on the given port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.1 | ColumnlldpXdot1RemVlanNameTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.2 | ColumnlldpXdot1RemVlanNameLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemVlanNameLoc… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.3 | ColumnlldpXdot1RemVlanNameIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.4 | ColumnlldpXdot1RemVlanId | read-only | current | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.5 | ColumnlldpXdot1RemVlanName | read-only | current | The string value used to identify VLAN name identified by the VLAN Id associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4 | TablelldpXdot1RemProtocolTable | not-accessible | current | This table contains one or more rows per protocol information about the remote system, received on the given port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1 | RowlldpXdot1RemProtocolEntry | not-accessible | current | Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpXdot1ProtocolIndex, received on the giv… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.1 | ColumnlldpXdot1RemProtocolTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.2 | ColumnlldpXdot1RemProtocolLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemProtocolLoc… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.3 | ColumnlldpXdot1RemProtocolIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.4 | ColumnlldpXdot1RemProtocolIdIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. |
| 1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.5 | ColumnlldpXdot1RemProtocolId | read-only | current | The octet string value used to identify the protocols associated with the given port of remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.14 | NodesysLLDPStatistics | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.14.1 | ScalarlldpStatsRemTablesLastChangeTime | read-only | current | The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the sysLLDPRemo… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.2 | ScalarlldpStatsRemTablesInserts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in sysLLDPRemoteSystemsData and lld… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.3 | ScalarlldpStatsRemTablesDeletes | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in sysLLDPRemoteSystemsData and lldp… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.4 | ScalarlldpStatsRemTablesDrops | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in sysLLDPRemoteSystemsData and … |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.5 | ScalarlldpStatsRemTablesAgeouts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in sysLLDPRemoteSystemsData and lldp… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.6 | TablelldpStatsTxPortTable | not-accessible | current | A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the sysLLDPPortConfigEntry object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.6.1 | RowlldpStatsTxPortEntry | not-accessible | current | LLDP frame transmission statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular … |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.6.1.1 | ColumnlldpStatsTxPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.6.1.2 | ColumnlldpStatsTxPortFramesTotal | read-only | current | The number of LLDP frames transmitted by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7 | TablelldpRxStatsPortTable | not-accessible | current | A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the sysLLDPPortConfigEntry object is e… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1 | RowlldpRxStatsPortEntry | not-accessible | current | LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular ent… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.1 | ColumnlldpStatsRxPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.2 | ColumnlldpStatsRxPortFramesDiscardedTotal | read-only | current | The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD… |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.3 | ColumnlldpStatsRxPortFramesErrors | read-only | current | The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.4 | ColumnlldpStatsRxPortFramesTotal | read-only | current | The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.5 | ColumnlldpStatsRxPortTLVsDiscardedTotal | read-only | current | The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.6 | ColumnlldpStatsRxPortTLVsUnrecognizedTotal | read-only | current | The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the … |
| 1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.7 | ColumnlldpStatsRxPortAgeoutsTotal | read-only | current | The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised … |
| 1.3.6.1.4.1.171.10.134.2.1.32.15 | NodesysLLDPLocalSystemData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.15.1 | ScalarlldpLocChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.2 | ScalarlldpLocChassisId | read-only | current | The string value used to identify the chassis component associated with the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.3 | ScalarlldpLocSysName | read-only | current | The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same va… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.4 | ScalarlldpLocSysDesc | read-only | current | The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the … |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.5 | ScalarlldpLocSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7 | TablelldpLocPortTable | not-accessible | current | This table contains one or more rows per port information associated with the local system known to this agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7.1 | RowlldpLocPortEntry | not-accessible | current | Information about a particular port component. Entries may be created and deleted in this table by the agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.1 | ColumnlldpLocPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.2 | ColumnlldpLocPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpLocPortId' object. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.3 | ColumnlldpLocPortId | read-only | current | The string value used to identify the port component associated with a given port in the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.4 | ColumnlldpLocPortDesc | read-only | current | The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPo… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8 | TablelldpLocManAddrTable | not-accessible | current | This table contains management address information on the local system known to this agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1 | RowlldpLocManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a partic… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.1 | ColumnlldpLocManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.2 | ColumnlldpLocManAddr | read-only | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.3 | ColumnlldpLocManAddrLen | read-only | current | The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address len… |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.4 | ColumnlldpLocManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.5 | ColumnlldpLocManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the local system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.6 | ColumnlldpLocManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16 | NodesysLLDPRemoteSystemsData | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1 | TablelldpRemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present fo… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1 | RowlldpRemEntry | not-accessible | current | Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery pro… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.1 | ColumnlldpRemTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.2 | ColumnlldpRemLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum id… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.3 | ColumnlldpRemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.4 | ColumnlldpRemChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.5 | ColumnlldpRemChassisId | read-only | current | The string value used to identify the chassis component associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.6 | ColumnlldpRemPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpRemPortId' object. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.7 | ColumnlldpRemPortId | read-only | current | The string value used to identify the port component associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.8 | ColumnlldpRemPortDesc | read-only | current | The string value used to identify the description of the given port associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.9 | ColumnlldpRemSysName | read-only | current | The string value used to identify the system name of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.10 | ColumnlldpRemSysDesc | read-only | current | The string value used to identify the system description of the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.11 | ColumnlldpRemSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.12 | ColumnlldpRemSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2 | TablelldpRemManAddrTable | not-accessible | current | This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known … |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1 | RowlldpRemManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.1 | ColumnlldpRemManTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.2 | ColumnlldpRemManLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemManLocalPortNum… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.3 | ColumnlldpRemManIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.4 | ColumnlldpRemManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.5 | ColumnlldpRemManAddr | read-only | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.6 | ColumnlldpRemManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.7 | ColumnlldpRemManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.8 | ColumnlldpRemManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3 | TablelldpRemUnknownTLVTable | not-accessible | current | This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic man… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1 | RowlldpRemUnknownTLVEntry | not-accessible | current | Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.1 | ColumnlldpRemUnknownTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.2 | ColumnlldpRemUnknownLocalPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemUnknownLocalPor… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.3 | ColumnlldpRemUnknownIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.4 | ColumnlldpRemUnknownTLVType | read-only | current | This object represents the value extracted from the type field of the TLV. |
| 1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.5 | ColumnlldpRemUnknownTLVInfo | read-only | current | This object represents the value extracted from the value field of the TLV. |
| 1.3.6.1.4.1.171.10.134.2.1.32.17 | NodesysLLDPNotification | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0 | NodelldpTraps | |||
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.1 | NotificationlldpRemTablesChange | current | A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote syste… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.2 | NotificationlldpExceedsMaxFrameSize | current | A lldpExceedsMaxFrameSize notification is sent if the size of LLDP frame to be transmitted exceeds the maximum frame size (1522 bytes). This can occur if many … | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.3 | NotificationlldpDupChasisId | current | A lldpDupChasisId notification sent if the configured chasisId and Received chasisId from the neighbor is same. It notifies the NMS that the information obtain… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.4 | NotificationlldpDupSystemName | current | A lldpDupSystemName notification sent if the configured system name and Received system name from the neighbor is same. It notifies the NMS that the informatio… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.5 | NotificationlldpDupManagmentAddress | current | A fsLldpDupManagementAddress notification sent if the configured management address and Received management address from the neighbor is same. The received dup… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.6 | NotificationlldpMisConfigPortVlanID | current | A lldpMisConfigPortVlanID notification sent if the Port VlanId of two systems connected to the same link is different. It notifies the NMS that the information… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.8 | NotificationlldpMisConfigVlanName | current | A lldpMisConfigVlanName notification sent if the vlan name of two systems connected to the same link is different. It notifies the NMS that the information obt… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.9 | NotificationlldpMisConfigProtocolIdentity | current | A lldpMisConfigProtocolIdentity notification sent if the protocol identity information (example spanning Tree protocol, the Link Aggregation protocol and propr… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.12 | NotificationlldpMisConfigMaxFrameSize | current | A lldpMisConfigMaxFrameSize notification sent if the maximum frame size configuration of two systems connected to the same link is different. Difference in max… | |
| 1.3.6.1.4.1.171.10.134.2.1.32.17.0.13 | NotificationlldpMisConfigOperMauType | current | A lldpMisConfigOperMauType notification sent if the Operational MauType of the two systems connected to the same link is different. It notifies the NMS that th… | |
| 1.3.6.1.4.1.171.10.134.2.1.35 | NodecompanyCableDiagnostic | |||
| 1.3.6.1.4.1.171.10.134.2.1.35.1 | ScalarsysCableDiagTriggerIndex | read-write | current | Trigger an interface index to do cable diagnostic. |
| 1.3.6.1.4.1.171.10.134.2.1.35.2 | ScalarsysCableDiagPair1TestResult | read-only | current | Cable diagnostics pair 1 test result. |
| 1.3.6.1.4.1.171.10.134.2.1.35.3 | ScalarsysCableDiagPair1FaultDistance | read-only | current | Cable Diagnostics pair 1 fault distance. |
| 1.3.6.1.4.1.171.10.134.2.1.35.4 | ScalarsysCableDiagPair2TestResult | read-only | current | Cable diagnostics pair 2 test result. |
| 1.3.6.1.4.1.171.10.134.2.1.35.5 | ScalarsysCableDiagPair2FaultDistance | read-only | current | Cable diagnostics pair 2 fault distance. |
| 1.3.6.1.4.1.171.10.134.2.1.35.6 | ScalarsysCableDiagPair3TestResult | read-only | current | Cable diagnostics pair 3 test result. |
| 1.3.6.1.4.1.171.10.134.2.1.35.7 | ScalarsysCableDiagPair3FaultDistance | read-only | current | Cable diagnostics pair 3 fault distance. |
| 1.3.6.1.4.1.171.10.134.2.1.35.8 | ScalarsysCableDiagPair4TestResult | read-only | current | Cable diagnostics pair 4 test result. |
| 1.3.6.1.4.1.171.10.134.2.1.35.9 | ScalarsysCableDiagPair4FaultDistance | read-only | current | Cable diagnostics pair 4 fault distance. |
| 1.3.6.1.4.1.171.10.134.2.1.35.10 | ScalarsysCableDiagLengthinRange | read-only | current | Cable diagnostics length when link up in speed 1G. (Display in range) |
| 1.3.6.1.4.1.171.10.134.2.1.37 | NodecompanyQinQ | |||
| 1.3.6.1.4.1.171.10.134.2.1.37.1 | NodesysQinQSystem | |||
| 1.3.6.1.4.1.171.10.134.2.1.37.1.1 | ScalarqinQGlobalStatus | read-write | current | This object is used to enable/disable the Q-in-Q status. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2 | TableqinQConfigTable | not-accessible | current | A table that contains Q-in-Q VLAN mode information about each port. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1 | RowqinQConfigEntry | not-accessible | current | A list of Q-in-Q VLAN mode information for each port. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.1 | ColumnqinQIfIndex | read-only | current | The index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.2 | ColumnqinQRoleState | read-write | current | Sets the QinQ Role as NNI or UNI. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.3 | ColumnqinQOuterTPID | read-write | current | Sets the QinQ Outer TPID value. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.4 | ColumnqinQMissDrop | read-write | current | This object indicates if drop pkts that do not match selective QinQ rule |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.5 | ColumnqinQAddInnerTag | read-write | current | innter tag for C-VLAN untag pkts |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.3 | ScalarqinQInnerTPID | read-write | current | Sets the QinQ Inner TPID value per system |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4 | TableqinQVlanTranslationTable | not-accessible | current | A table that contains Q-in-Q VLAN translation config. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1 | RowqinQVlanTranslationEntry | not-accessible | current | A list of Q-in-Q VLAN translation config . |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.1 | ColumnqinQVlanTransPortNum | read-only | current | The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.2 | ColumnqinQVlanTransCVID | read-only | current | The customer VLAN ID in the customer VLAN tag of an ingress frame at this specified port or the customer VLAN ID to which the ingress frame is classified to, a… |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.3 | ColumnqinQVlanTransSVID | read-write | current | S-VLAN Id for the service instance to which this port and this C-VLAN are mapped to. ie) CEP,C-VID ===> S-VID. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.4 | ColumnqinQVlanTransAction | read-write | current | This object indicates add outer tag or replace inner tag by outer tag . |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.5 | ColumnqinQVlanTransPriority | read-write | current | The priority for rule matched outer tag. -1 means use inner priority. |
| 1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.6 | ColumnqinQVlanTransRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.171.10.134.2.1.38 | NodecompanyTimeRangeMgmt | |||
| 1.3.6.1.4.1.171.10.134.2.1.38.1 | TablesysTimeRangeSettingTable | not-accessible | current | A table to configure time Range in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1 | RowtimeRangeSettingEntry | not-accessible | current | A schedule entry to configure time Range in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.1 | ColumntimeRangeIndex | read-only | current | The Time Range identifier. The maximum number of Schedule entry is the number of ports supported PoE function. The value must be between 1 and 52. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.2 | ColumntimeRangeName | read-write | current | The Schedule name associated with the Schedule entry (e.g., `abc, bbb'). |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.3 | ColumntimeRangeDate | read-write | current | Enable/Disable date range checking while executing time base PoE. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.4 | ColumntimeRangeStartYear | read-write | current | Start year of the Schedule entry. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.5 | ColumntimeRangeStartMonth | read-write | current | Start month of the Schedule entry. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.6 | ColumntimeRangeStartDay | read-write | current | Start day of the Schedule entry. The value must be from 1 to 31. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.7 | ColumntimeRangeStartHour | read-write | current | Start hour of the Schedule entry. The value must be from 0 to 23. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.8 | ColumntimeRangeStartMinute | read-write | current | Start minute of the Schedule entry. The value must be from 0 to 59. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.9 | ColumntimeRangeEndYear | read-write | current | End year of the Schedule entry. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.10 | ColumntimeRangeEndMonth | read-write | current | End month of the Schedule entry. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.11 | ColumntimeRangeEndDay | read-write | current | End day of the Schedule entry. The value must be from 1 to 31. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.12 | ColumntimeRangeEndHour | read-write | current | End hour of the Schedule entry. The value must be from 0 to 23. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.13 | ColumntimeRangeEndMinute | read-write | current | End minute of the Schedule entry. The value must be from 0 to 59. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.14 | ColumntimeRangeMonday | read-write | current | Enable/Disble scheduling Monday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.15 | ColumntimeRangeTuesday | read-write | current | Enable/Disble scheduling Tuesday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.16 | ColumntimeRangeWednesday | read-write | current | Enable/Disble scheduling Wednesday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.17 | ColumntimeRangeThursday | read-write | current | Enable/Disble scheduling Thursday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.18 | ColumntimeRangeFriday | read-write | current | Enable/Disble scheduling Friday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.19 | ColumntimeRangeSaturday | read-write | current | Enable/Disble scheduling Saturday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.20 | ColumntimeRangeSunday | read-write | current | Enable/Disble scheduling Sunday. |
| 1.3.6.1.4.1.171.10.134.2.1.38.1.1.21 | ColumntimeRangeRowStatus | read-write | current | The status of an entry in the Time Range Information Table. Only a subset of the rowstatus variables (active, notinservice, createAndWait, destroy) are availab… |
| 1.3.6.1.4.1.171.10.134.2.1.45 | NodecompanyLimitIP | |||
| 1.3.6.1.4.1.171.10.134.2.1.45.1 | TablesyslimitIPMulticastProfileTable | not-accessible | current | A list of the limit ip multicast Profile Table. |
| 1.3.6.1.4.1.171.10.134.2.1.45.1.1 | RowlimitIPMulticastProfileEntry | not-accessible | current | A limit ip multicast entry maintain by the start IP Address, end ip address, profile id. |
| 1.3.6.1.4.1.171.10.134.2.1.45.1.1.1 | ColumnlimitIPMulticastProfileID | read-only | current | The ProfileID of the limit ip multicast profile entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.1.1.2 | ColumnlimitIPMulticastIPType | read-only | current | Indicate the IP type of profile. |
| 1.3.6.1.4.1.171.10.134.2.1.45.1.1.3 | ColumnlimitIPMulticastProfileName | read-write | current | The ProfileName of the limit ip multicast profile entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.1.1.4 | ColumnlimitIPMulticastProfileStatus | read-write | current | The status of an entry in the limit ip multicast profile Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3 | TablesyslimitIPMulticastPortTable | not-accessible | current | A list of the limit ip multicast Port entry Table. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1 | RowlimitIPMulticastPortEntry | not-accessible | current | A limit ip multicast entry maintain by the Port Index. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1.1 | ColumnlimitIPMulticastPortID | read-only | current | The Port Index of the limit ip multicast port entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1.2 | ColumnlimitIPMulticastPortIPType | read-only | current | Indicate the IP type of entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1.3 | ColumnlimitIPMulticastPortState | read-write | current | The limit ip multicast port state |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1.4 | ColumnlimitIPMulticastPortProfileID | read-write | current | The limit ip multicast port mapping profileID list. |
| 1.3.6.1.4.1.171.10.134.2.1.45.3.1.5 | ColumnlimitIPMulticastPortMaxGrp | read-write | current | The limit ip multicast per-port max group. |
| 1.3.6.1.4.1.171.10.134.2.1.45.4 | TablelimitIpMulticastRangeTable | not-accessible | current | A list of the limit ip multicast entry Table. |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1 | RowlimitIpMulticastRangeEntry | not-accessible | current | A limit ip multicast entry maintain by the start IP Address, end ip address, profile id. |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1.1 | ColumnlimitIpMulticastRangeProfileID | read-only | current | The ProfileID of the limit ip multicast entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1.2 | ColumnlimitIpMulticastRangeIPType | read-only | current | Indicate the IP type of entry. |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1.3 | ColumnlimitIpMulticastRangeStartIpAddr | read-only | current | The limit ip multicast IP address is used to set start ip |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1.4 | ColumnlimitIpMulticastRangeEndIpAddr | read-only | current | The limit ip multicast IP address is used to set end ip |
| 1.3.6.1.4.1.171.10.134.2.1.45.4.1.5 | ColumnlimitIpMulticastRangeStatus | read-write | current | The status of an entry in the limit ip multicast entry Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| 1.3.6.1.4.1.171.10.134.2.1.49 | NodecompanyMulticastFilter | |||
| 1.3.6.1.4.1.171.10.134.2.1.49.1 | TablesysMulticastFilterPortTable | not-accessible | current | A table to control multicast filtering modes. |
| 1.3.6.1.4.1.171.10.134.2.1.49.1.1 | RowmulticastFilterPortEntry | not-accessible | current | An entry appears in this table for each interface in the mcastFiltertem. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.49.1.1.1 | ColumnmulticastFilterPortIndex | read-only | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.49.1.1.2 | ColumnmulticastFilterPortType | read-write | current | Configures the multicast filtering modes as below : forward -Forwards all unregistered groups. filter -Filters all unregistered groups. |
| 1.3.6.1.4.1.171.10.134.2.1.50 | NodecompanyIPv6Neighbor | |||
| 1.3.6.1.4.1.171.10.134.2.1.50.1 | TablesysIPv6neighborTable | not-accessible | current | A list of the Neighbor Cache Table. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1 | Rowipv6NeighborEntry | not-accessible | current | A Neighbor cache entry containing the ifindex and ipv6 addr. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1.1 | Columnipv6NeighborIndex | read-only | current | The interface index of the Neighbor entry. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1.2 | Columnipv6NeighborAddr | read-only | current | Allows the entry of an IP address that will be a Neighbor entry into the Neighbor Cache Table. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1.3 | Columnipv6NeighborMacAddr | read-only | current | The MAC address associated of the Neighbor entry. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1.5 | Columnipv6NeighborCacheState | read-only | current | The type associated of the Neighbor entry. |
| 1.3.6.1.4.1.171.10.134.2.1.50.1.1.7 | Columnipv6NeighborRowStatus | read-write | current | The status of an entry in the Neighbor Cache Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available. |
| 1.3.6.1.4.1.171.10.134.2.1.51 | NodecompanyEoam | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.1 | NodesysEoamSystem | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2 | TableeoamTable | not-accessible | current | A table that contains EOAM mode information about each port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1 | RoweoamEntry | not-accessible | current | A list of EOAM mode information for each port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.1 | ColumneoamIfIndex | read-only | current | The index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.2 | ColumneoamState | read-write | current | Sets the EOAM state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.3 | ColumneoamMode | read-write | current | Sets the EOAM mode as active or passive. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.4 | ColumneoamReceivedRemoteLoopback | read-write | current | Sets the EOAM received or ignore remote loopback packets. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.5 | ColumneoamRemoteLoopback | read-write | current | Sets the EOAM remote loopback start or stop. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.6 | ColumneoamMaxOAMPDU | read-only | current | Indicate the max EOAM PDU received packets. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.7 | ColumneoamUnidirection | read-only | current | Indicate the eoamUnidirection support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.8 | ColumneoamLinkMonitoring | read-only | current | Indicate the eoam Link Monitoring support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.9 | ColumneoamVarReq | read-only | current | Indicate the eoam variable support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.10 | ColumneoamRemoteLoopbackSupport | read-only | current | Indicate the eoam remote loopback support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.11 | ColumneoamPDURev | read-only | current | The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.12 | ColumneoamOperStatus | read-only | current | At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may… |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.13 | ColumneoamPeerMode | read-only | current | Indicate the EOAM peer mode as active or passive. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.14 | ColumneoamPeerMacAddress | read-only | current | The MAC address of the peer OAM entity. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.15 | ColumneoamPeerVendorOui | read-only | current | The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.16 | ColumneoamPeerMaxOAMPDU | read-only | current | Indicate the max EOAM peer PDU received packets. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.17 | ColumneoamPeerUnidirection | read-only | current | Indicate the eoam peer Unidirection support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.18 | ColumneoamPeerLinkMonitoring | read-only | current | Indicate the eoam peer Link Monitoring support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.19 | ColumneoamPeerVarReq | read-only | current | Indicate the eoam peer variable support or not support. |
| 1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.20 | ColumneoamPeerPDURev | read-only | current | The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration chang… |
| 1.3.6.1.4.1.171.10.134.2.1.51.2 | NodesysEoamLinkMonitor | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1 | TableeoamLinkMonitorTable | not-accessible | current | A table that contains EOAM link monitor information about each port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1 | RoweoamLinkMonitorEntry | not-accessible | current | A list of EOAM link monitor information for each port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.1 | ColumneoamLinkMonitorIfIndex | read-only | current | The index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.2 | ColumnerrorSymbolNotifyState | read-write | current | Sets the EOAM error symbol notify state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.3 | ColumnerrorSymbolThreshold | read-write | current | Sets the EOAM error symbol threshold. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.4 | ColumnerrorSymbolWindow | read-write | current | Sets the EOAM error symbol window. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.5 | ColumnerrorFrameNotifyState | read-write | current | Sets the EOAM error frame notify state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.6 | ColumnerrorFrameThreshold | read-write | current | Sets the EOAM error frame threshold. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.7 | ColumnerrorFrameWindow | read-write | current | Sets the EOAM error symbol window. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.8 | ColumnerrorFrameSecondsNotifyState | read-write | current | Sets the EOAM error symbol notify state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.9 | ColumnerrorFrameSecondsThreshold | read-write | current | Sets the EOAM error symbol threshold. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.10 | ColumnerrorFrameSecondsWindow | read-write | current | Sets the EOAM error symbol window. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.11 | ColumnerrorFramePeriodNotifyState | read-write | current | Sets the EOAM error symbol notify state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.12 | ColumnerrorFramePeriodThreshold | read-write | current | Sets the EOAM error symbol threshold. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.13 | ColumnerrorFramePeriodWindow | read-write | current | Sets the EOAM error symbol window. |
| 1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.14 | ColumneoamCriticalLinkEventState | read-write | current | Set the EOAM critical link event state. |
| 1.3.6.1.4.1.171.10.134.2.1.51.3 | NodesysEoamStats | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1 | TablesysEoamStatsTable | not-accessible | current | This table contains statistics for the OAM function on a particular Ethernet-like interface. There is an entry in the table for every entry in the dot3OamTable… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1 | RoweoamStatsEntry | not-accessible | current | An entry in the table containing statistics information on the Ethernet OAM function for a single Ethernet-like interface. Entries are automatically created fo… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.1 | ColumneoamInfomationIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.2 | ColumneoamInformationTx | read-only | current | A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management sy… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.3 | ColumneoamInformationRx | read-only | current | A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management syste… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.4 | ColumneoamUniqueEventNotificationTx | read-only | current | A count of the number of unique Event OAMPDUs transmitted on this interface. Event Notifications may be sent in duplicate to increase the probability of succes… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.5 | ColumneoamUniqueEventNotificationRx | read-only | current | A count of the number of unique Event OAMPDUs received on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of su… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.6 | ColumneoamDuplicateEventNotificationTx | read-only | current | A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.7 | ColumneoamDuplicateEventNotificationRx | read-only | current | A count of the number of duplicate Event OAMPDUs received on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.8 | ColumneoamLoopbackControlTx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.9 | ColumneoamLoopbackControlRx | read-only | current | A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management … |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.10 | ColumneoamVariableRequestTx | read-only | current | A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.11 | ColumneoamVariableRequestRx | read-only | current | A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management … |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.12 | ColumneoamVariableResponseTx | read-only | current | A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the managem… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.13 | ColumneoamVariableResponseRx | read-only | current | A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.14 | ColumneoamOrgSpecificTx | read-only | current | A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.15 | ColumneoamOrgSpecificRx | read-only | current | A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.16 | ColumneoamUnsupportedCodesTx | read-only | current | A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of t… |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.17 | ColumneoamUnsupportedCodesRx | read-only | current | A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the … |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.18 | ColumneoamFramesLostDueToOam | read-only | current | A count of the number of frames that were dropped by the OA multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases … |
| 1.3.6.1.4.1.171.10.134.2.1.51.3.2 | ScalarsysEoamStatsClearPortlist | read-write | current | Clear Eoam statistics according to portlist setting |
| 1.3.6.1.4.1.171.10.134.2.1.51.4 | NodesysEoamEventLog | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2 | TablesysOamEventLogTable | not-accessible | current | This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in … |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1 | RoweoamEventLogEntry | not-accessible | current | An entry in the eoamEventLogTable. Entries are automatically created whenever Ethernet OAM events occur at the local OAM entity, and when Event Notification OA… |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.1 | ColumneoamEventLogPort | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.2 | ColumneoamEventLogIndex | read-only | current | An arbitrary integer for identifying individual events within the event log. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.3 | ColumneoamEventLogTimestamp | read-only | current | The object indicates eoam event log time stamp which in the format: day/month/year hour:minute:second. e.g 30/10/2013 17:36:11. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.4 | ColumneoamEventLogType | read-only | current | The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSym… |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.5 | ColumneoamEventLogLocation | read-only | current | Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)). |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.6 | ColumneoamEventLogValue | read-only | current | The Ethernet OAM event log event value. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.7 | ColumneoamEventLogWindow | read-only | current | The Ethernet OAM event log window value. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.8 | ColumneoamEventLogThreshold | read-only | current | The Ethernet OAM event log Threshold value. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.9 | ColumneoamEventLogAccError | read-only | current | The Ethernet OAM event log accumulate errors. |
| 1.3.6.1.4.1.171.10.134.2.1.51.4.3 | ScalarsysEoamEventLogClearPortlist | read-write | current | Clear Eoam Event Log Table according to portlist setting |
| 1.3.6.1.4.1.171.10.134.2.1.51.5 | NodesysEoamTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.5.0 | NodeeoamTrap | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.5.0.1 | NotificationeoamNotifyThresholdEvent | current | eoamNotifyThresholdEvent trap is sent when a local or remote threshold crossing event is detected | |
| 1.3.6.1.4.1.171.10.134.2.1.51.5.0.2 | NotificationeoamNotifyNonThresholdEvent | current | eoamNotifyNonThresholdEvent trap is sent when a local or remote non-threshold crossing event is detected | |
| 1.3.6.1.4.1.171.10.134.2.1.51.6 | NodesysEoamLoopbackTest | |||
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1 | TableeoamLoopbackTestTable | not-accessible | current | This table contains objects to configure Remote Loopback mode and loopback tests. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1 | RoweoamLoopbackTestEntry | not-accessible | current | This table contains remote loopback configuration and loopback test configuration. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.1 | ColumneoamLoopbackTestIndex | read-only | current | fault management loopback port index. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.2 | ColumneoamLoopbackStatus | read-only | current | The loopback status of the local interface. This status is obtained from the local EOAM Client. When operating in normal mode with no loopback in progress, the… |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.3 | ColumneoamLoopbackTestPattern | read-write | current | Test Pattern for the remote loopback test. The default pattern of the test data will be 'F0F0F0F0'H |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.4 | ColumneoamLoopbackTestPktSize | read-write | current | Test packet size for the remote loopback test |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.5 | ColumneoamLoopbackTestCount | read-write | current | Number of Test packets to be sent for the remote loopback test |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.6 | ColumneoamLoopbackTestWaitTime | read-write | current | This timer is started after sending the last test packet. The Fault management module will wait until this timer expires or the packet reception counter is equ… |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.7 | ColumneoamLoopbackTestCommand | read-write | current | This attribute initiates remote loopback test with an EOAM peer. Writing startLoopbackTest(2) to this attribute cause the fault management send loopback test p… |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.8 | ColumneoamLoopbackTestStatus | read-only | current | This attribute indicates the status of the remote loopback test. 'notInitiated' indicates that the loopback has not been initiated yet. 'loopbackbTestInprogres… |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.9 | ColumneoamLoopbackTestStartTimestamp | read-only | current | Start timestamp of the current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.10 | ColumneoamLoopbackTestEndTimestamp | read-only | current | End timestamp of the current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.11 | ColumneoamLoopbackTestTxCount | read-only | current | Statistics of number of Test packets transmitted during current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.12 | ColumneoamLoopbackTestRxCount | read-only | current | Statistics of number of Test packets received during current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.13 | ColumneoamLoopbackTestMatchCount | read-only | current | Statistics of number of Test packets that matched with the test pattern sent during current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2 | TableeoamLoopbackStatsTable | not-accessible | current | This table contains statistics of the last remote loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1 | RoweoamLoopbackStatsEntry | not-accessible | current | This table contains remote loopback test results of the last session. This table is updated every time a new loopback test session is started. The current fsFm… |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.1 | ColumneoamLoopbackStatsIndex | read-only | current | fault management loopback port index. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.2 | ColumneoamLoopbackStatsStartTimestamp | read-only | current | Start timestamp of the current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.3 | ColumneoamLoopbackStatsEndTimestamp | read-only | current | End timestamp of the current loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.4 | ColumneoamLoopbackStatsTxCount | read-only | current | Statistics of number of Test packets transmitted during last loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.5 | ColumneoamLoopbackStatsRxCount | read-only | current | Statistics of number of Test packets received during last loopback test. |
| 1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.6 | ColumneoamLoopbackStatsMatchCount | read-only | current | Statistics of number of Test packets that matched with the test pattern sent. |
| 1.3.6.1.4.1.171.10.134.2.1.52 | NodecompanyDuld | |||
| 1.3.6.1.4.1.171.10.134.2.1.52.1 | NodesysDuld | |||
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1 | TableduldTable | not-accessible | current | A table that contains DULD mode information about each port. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1 | RowduldEntry | not-accessible | current | A list of DULD mode information for each port. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.1 | ColumnduldIfIndex | read-only | current | The index of the port. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.2 | ColumnduldState | read-write | current | Sets the DULD admin state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.3 | ColumnduldOperState | read-only | current | Gets the DULD Oper state enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.4 | ColumnduldMode | read-write | current | Sets the DULD mode as shutdown or normal. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.5 | ColumnduldLinkStatus | read-only | current | Gets the DULD link status. |
| 1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.6 | ColumnduldDiscoveryTime | read-write | current | Sets the DULD discovery time. |
| 1.3.6.1.4.1.171.10.134.2.1.60 | NodecompanyEee | |||
| 1.3.6.1.4.1.171.10.134.2.1.60.1 | NodesysEee | |||
| 1.3.6.1.4.1.171.10.134.2.1.60.1.1 | TableeeeTable | not-accessible | current | A table that contains EEE status about each port. |
| 1.3.6.1.4.1.171.10.134.2.1.60.1.1.1 | RoweeeEntry | not-accessible | current | A list of EEE status for each port. |
| 1.3.6.1.4.1.171.10.134.2.1.60.1.1.1.1 | ColumneeePort | read-only | current | This object indicates the port index. |
| 1.3.6.1.4.1.171.10.134.2.1.60.1.1.1.2 | Columneeestatus | read-write | current | This object indicates the port eee status. |
| 1.3.6.1.4.1.171.10.134.2.1.86 | NodecompanyDHCPv6Relay | |||
| 1.3.6.1.4.1.171.10.134.2.1.86.1 | NodesysDHCPv6RelayControl | |||
| 1.3.6.1.4.1.171.10.134.2.1.86.1.1 | Scalardhcpv6RelayState | read-write | current | This object indicates DHCPv6 relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.86.1.2 | Scalardhcpv6RelayHopCount | read-write | current | This object indicates the maximum number of router hops that the DHCPv6 packets can cross. |
| 1.3.6.1.4.1.171.10.134.2.1.86.2 | NodesysDHCPv6RelayManagement | |||
| 1.3.6.1.4.1.171.10.134.2.1.86.2.1 | Tabledhcpv6RelayInterfaceTable | not-accessible | current | This table indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.86.2.1.1 | Rowdhcpv6RelayInterfaceEntry | not-accessible | current | A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.1 | Columndhcpv6RelayServerIP | read-only | current | This object indicates the DHCP server IP address. |
| 1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.2 | Columndhcpv6RelayInterface | read-only | current | This object indicates the input Interface Index value mapped to this Server Address Table. |
| 1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.3 | Columndhcpv6RelayRowStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.10.134.2.1.86.3 | NodesysDHCPv6RelayOption37 | |||
| 1.3.6.1.4.1.171.10.134.2.1.86.3.1 | Scalardhcpv6RelayOption37State | read-write | current | This object indicates DHCPv6 relay option 37 function is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.86.3.2 | Scalardhcpv6RelayOption37CheckState | read-write | current | This object indicates DHCPv6 relay option 37 Check function is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.86.3.3 | Scalardhcpv6RelayOption37RemoteIDType | read-write | current | This object indicates the type of remote ID. |
| 1.3.6.1.4.1.171.10.134.2.1.86.3.4 | Scalardhcpv6RelayOption37RemoteID | read-write | current | This object displays the current remote ID of the device. If RemoteIDType is set to default, the value will be the MAC address of the device, and this object c… |
| 1.3.6.1.4.1.171.10.134.2.1.88 | NodecompanyMldsGroup | |||
| 1.3.6.1.4.1.171.10.134.2.1.88.1 | NodesysMldsSystem | |||
| 1.3.6.1.4.1.171.10.134.2.1.88.1.1 | ScalarmldsStatus | read-write | current | Enables or disables MLD snooping in the system. When set to 'enabled', the MLDS module starts protocol operations. When set to 'disabled', the MLDS module stop… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3 | NodesysMldsVlan | |||
| 1.3.6.1.4.1.171.10.134.2.1.88.3.3 | TablemldsVlanRouterTable | not-accessible | current | This table contains the list of ports through which a router, in a particular VLAN is reachable. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.3.1 | RowmldsVlanRouterEntry | not-accessible | current | Contains the VLAN ID and list of ports on which routers are present in the VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.1 | ColumnmldsVlanRouterVlanId | read-only | current | VLAN ID of the ports through which router is reachable. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.2 | ColumnmldsVlanRouterStaticPortList | read-write | current | List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured sta… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.3 | ColumnmldsVlanRouterDynamicPortList | read-only | current | List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured st… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4 | TablemldsVlanFilterTable | not-accessible | current | This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1 | RowmldsVlanFilterEntry | not-accessible | current | Contains snooping status , version and fast leave configuration for a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.1 | ColumnmldsVlanFilterVlanId | read-only | current | Index of MldsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in MldsVlanFilterEntry is to be done. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.2 | ColumnmldsVlanSnoopStatus | read-write | current | This object allows you to enable/disable MLDS function on a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.3 | ColumnmldsVlanQuerier | read-only | current | Indicates whether the switch is configured as a querier in the VLAN |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.4 | ColumnmldsVlanCfgQuerier | read-write | current | The snooping switch can be configured as a querier via this object to send out MLD general queries when IGMP routers are not present in the VLAN. When set to '… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.5 | ColumnmldsVlanQueryInterval | read-write | current | This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as … |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.6 | ColumnmldsVlanFastLeave | read-write | current | Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for … |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.7 | ColumnmldsVlanQuerierVersion | read-write | current | This object allows you to set igmp version function on a specific VLAN. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.8 | ColumnmldsVlanRouterPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt router port entry will be purged for a specific VLAN. For each router port learnt, this timer runs for '… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.9 | ColumnmldsVlanHostPortPurgeInterval | read-write | current | This is the interval (in seconds) after which a learnt port entry will be purged for a specific VLAN. For each port on which report has been received this time… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.10 | ColumnmldsVlanRobustnessValue | read-write | current | When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attrib… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.11 | ColumnmldsVlanGrpQueryInterval | read-write | current | The value of this attribute defines the time period with which the specific VLAN will send group specific queries on a port to check if there is any interested… |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.12 | ColumnmldsVlanQueryMaxResponseTime | read-write | current | The maximum query response time advertised General queries on this interface. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5 | TablemldsVlanMulticastGroupTable | not-accessible | current | This table contains MAC based multicast forwarding information. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5.1 | RowmldsVlanMulticastGroupEntry | not-accessible | current | This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.1 | ColumnmldsVlanMulticastGroupVlanId | read-only | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.2 | ColumnmldsVlanMulticastGroupIpAddress | read-only | current | Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.3 | ColumnmldsVlanMulticastGroupMacAddress | read-only | current | Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format. |
| 1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.4 | ColumnmldsVlanMulticastGroupPortList | read-only | current | List of ports onto which the multicast data packets destined for this group will be forwarded. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4 | NodesysMldsHost | |||
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1 | TablemldsHostTable | not-accessible | current | This table is used to manage the mld snooping Host based Fast Leave function of the switch. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1.1 | RowmldsHostEntry | not-accessible | current | Contains management entities for mld snooping Host based function. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.1 | ColumnmldsHostTableVLANID | read-only | current | VLAN ID of mld snooping Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.2 | ColumnmldsHostTableGroupAddress | read-only | current | Group address of mld snooping Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.3 | ColumnmldsHostTablePort | read-only | current | Port number of mld snooping Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.4 | ColumnmldsHostTableHostIPAddress | read-only | current | Host IP address of Group in mld snooping Host table entry. |
| 1.3.6.1.4.1.171.10.134.2.1.90 | NodecompanyTraceRoute | |||
| 1.3.6.1.4.1.171.10.134.2.1.90.1 | ScalarsysTraceRouteCtlAddressType | read-write | current | Specifies the type of host address to be used on the traceroute request at the remote host, 1(ipv4), 2(ipv6). |
| 1.3.6.1.4.1.171.10.134.2.1.90.2 | ScalarsysTraceRouteCtlAddress | read-write | current | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by examining the value of the correspondi… |
| 1.3.6.1.4.1.171.10.134.2.1.90.3 | ScalarsysTraceRouteCtlTimeOut | read-write | current | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.4.1.171.10.134.2.1.90.4 | ScalarsysTraceRouteCtlTTL | read-write | current | Specifies the time-to-live value. |
| 1.3.6.1.4.1.171.10.134.2.1.90.5 | ScalarsysTraceRouteCtlPort | read-write | current | Specifies the (initial) UDP port to send the traceroute request to. A port needs to be specified that is not in use at the destination (target) host. The defau… |
| 1.3.6.1.4.1.171.10.134.2.1.90.6 | ScalarsysTraceRouteCtlProbe | read-write | current | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
| 1.3.6.1.4.1.171.10.134.2.1.90.7 | ScalarsysTraceRouteCtlAdminStatus | read-write | current | Control the traceroute action state, value should be in: enabled(1) - Attempt to activate the test as configure. disabled(2) - Deactivate the test. |
| 1.3.6.1.4.1.171.10.134.2.1.90.8 | TablesysTraceRouteHistoryTable | not-accessible | current | Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation. An implementation of this MIB will remove the oldest … |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1 | RowtraceRouteHistoryEntry | not-accessible | current | Defines a table for storing the results of a traceroute operation. Entries in this table are limited by the value of the corresponding traceRouteCtlMaxRows obj… |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.1 | ColumntraceRouteHistoryIndex | read-only | current | An entry in this table is created when the result of a traceroute probe is determined. The initial 2 instance identifier index values identify the traceRouteCt… |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.2 | ColumntraceRouteHistoryHopIndex | read-only | current | Indicates which hop in a traceroute path the probe's results are for. The value of this object is initially determined by the value of traceRouteCtlInitialTtl. |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.3 | ColumntraceRouteHistoryProbeIndex | read-only | current | Indicates the index of a probe for a particular hop in a traceroute path. The number of probes per hop is determined by the value of the corresponding traceRou… |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.4 | ColumntraceRouteHistoryHAddrType | read-only | current | This objects indicates the type of address stored in the corresponding traceRouteHistoryHAddr object. |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.5 | ColumntraceRouteHistoryHAddr | read-only | current | The address of a hop in a traceroute path. This object is not allowed to be a DNS name. The value of the corresponding object, traceRouteHistoryHAddrType, indi… |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.6 | ColumntraceRouteHistoryResponse | read-only | current | The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is repo… |
| 1.3.6.1.4.1.171.10.134.2.1.90.8.1.7 | ColumntraceRouteHistoryStatus | read-only | current | The result of a traceroute operation made by a remote host for a particular probe. |
| 1.3.6.1.4.1.171.10.134.2.1.98 | NodecompanyPPPoE | |||
| 1.3.6.1.4.1.171.10.134.2.1.98.1 | ScalarsysPppoeGlobalState | read-write | current | PPPoE global state |
| 1.3.6.1.4.1.171.10.134.2.1.98.2 | TablesysPppoePortTable | not-accessible | current | A table to control PPPoE features of the device. |
| 1.3.6.1.4.1.171.10.134.2.1.98.2.1 | RowpppoePortEntry | not-accessible | current | An entry appears in PPPoE table for each interface in the system. |
| 1.3.6.1.4.1.171.10.134.2.1.98.2.1.1 | ColumnpppoePortIndex | read-only | current | Interface index of the port for the configuration in this entry applies. |
| 1.3.6.1.4.1.171.10.134.2.1.98.2.1.2 | ColumnpppoePortState | read-write | current | PPPoE per port state |
| 1.3.6.1.4.1.171.10.134.2.1.98.2.1.3 | ColumnpppoePortCircuitIDType | read-write | current | PPPoE per port circuit ID type |
| 1.3.6.1.4.1.171.10.134.2.1.98.2.1.4 | ColumnpppoePortUDFString | read-write | current | PPPoE per port UDF string |
| 1.3.6.1.4.1.171.10.134.2.1.99 | NodecompanyStatistics | |||
| 1.3.6.1.4.1.171.10.134.2.1.99.1 | TablesysStatisticsTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1 | RowstatisticsEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.1 | ColumnstatisticsIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.2 | ColumnstatisticsInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.3 | ColumnstatisticsInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.4 | ColumnstatisticsInMcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast address at this sub-layer. Discontinuities … |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.5 | ColumnstatisticsInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.6 | ColumnstatisticsInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.7 | ColumnstatisticsInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.8 | ColumnstatisticsOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.9 | ColumnstatisticsOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.10 | ColumnstatisticsOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.11 | ColumnstatisticsOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.12 | ColumnstatisticsOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.13 | ColumnstatisticsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision includ… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.14 | ColumnstatisticsExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is ope… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.15 | ColumnstatisticsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.16 | ColumnstatisticsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.17 | ColumnstatisticsEtherUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.18 | ColumnstatisticsEtherOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.19 | ColumnstatisticsEtherFragments | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.20 | ColumnstatisticsEtherJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.21 | ColumnstatisticsEtherDropEvents | read-only | current | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets … |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.22 | ColumnstatisticsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.23 | ColumnstatisticsSingleCollisionFrames | read-only | current | A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.24 | ColumnstatisticsStatsCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3… |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.25 | ColumnstatisticsPkts64Octets | read-only | current | The number of pkts that it's length is 64 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.26 | ColumnstatisticsPkts65to127Octets | read-only | current | The number of Rx pkts that it's length is 65-127 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.27 | ColumnstatisticsPkts128to255Octets | read-only | current | The number of Rx pkts that it's length is 128-255 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.28 | ColumnstatisticsPkts256to511Octets | read-only | current | The number of Rx pkts that it's length is 256-511 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.29 | ColumnstatisticsPkts512to1023Octets | read-only | current | The number of Rx pkts that it's length is 512-1023 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.1.1.30 | ColumnstatisticsPkts1024to1518Octets | read-only | current | The number of Rx pkts that it's length is 1024-1518 bytes. |
| 1.3.6.1.4.1.171.10.134.2.1.99.2 | TablesysStatisticsClearTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.171.10.134.2.1.99.2.1 | RowstatisticsClearEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.171.10.134.2.1.99.2.1.1 | ColumnstatisticsClearIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.171.10.134.2.1.99.2.1.2 | ColumnstatisticsClearStatus | read-write | current | Enable or disable statistics Counters Clear on read by port. |
| 1.3.6.1.4.1.171.10.134.2.1.100 | NodecompanyPing | |||
| 1.3.6.1.4.1.171.10.134.2.1.100.1 | ScalarsysPingDestIpType | read-write | current | The IP address type of the node to be pinged. |
| 1.3.6.1.4.1.171.10.134.2.1.100.2 | ScalarsysPingDestIpAddr | read-write | current | The IP address of the node to be pinged, set ip type before set it. |
| 1.3.6.1.4.1.171.10.134.2.1.100.3 | ScalarsysPingTimeout | read-write | current | The time in seconds after which the entity waiting for the ping response times out. |
| 1.3.6.1.4.1.171.10.134.2.1.100.4 | ScalarsysPingTimes | read-write | current | The number of times the given node address is to be pinged. value 0 for infinite times. |
| 1.3.6.1.4.1.171.10.134.2.1.100.5 | ScalarsysPingStart | read-write | current | The ping event of ping operate. |
| 1.3.6.1.4.1.171.10.134.2.1.100.6 | ScalarsysPingStatus | read-only | current | The current status of the Ping operate |
| 1.3.6.1.4.1.171.10.134.2.1.100.7 | ScalarsysPingSuccesses | read-only | current | The number of ping responses received. |
| 1.3.6.1.4.1.171.10.134.2.1.101 | NodecompanyDDP | |||
| 1.3.6.1.4.1.171.10.134.2.1.101.1 | ScalarsysDDPStatus | read-write | current | Enable/Disable DDP function. |
| 1.3.6.1.4.1.171.10.134.2.1.101.2 | ScalarsysDDPReportTime | read-write | current | Set DDP report time seconds. |
| 1.3.6.1.4.1.171.10.134.2.1.101.3 | TablesysDDPTable | not-accessible | current | Define sysDDPTable for per port settings. |
| 1.3.6.1.4.1.171.10.134.2.1.101.3.1 | RowddpEntry | not-accessible | current | Define sysDDPTable for per port settings. |
| 1.3.6.1.4.1.171.10.134.2.1.101.3.1.1 | ColumnddpPort | read-only | current | This object indicates the port index. |
| 1.3.6.1.4.1.171.10.134.2.1.101.3.1.2 | ColumnddpPortStatus | read-write | current | This object indicates DDP status is enabled or disabled. |
| 1.3.6.1.4.1.171.10.134.2.1.102 | NodecompanySession | |||
| 1.3.6.1.4.1.171.10.134.2.1.102.1 | TablesyssessionTable | not-accessible | current | A Table contain the user login session information. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1 | RowsyssessionEntry | not-accessible | current | A Session Table contain the user login information. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.1 | ColumnsessionID | read-only | current | The index of session table. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.2 | ColumnsessionUserName | read-only | current | The name of login user. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.3 | ColumnsessionUserPrivilege | read-only | current | login user privilege. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.4 | ColumnsessionLoginTime | read-only | current | The time at which user login. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.5 | ColumnsessionLiveTime | read-only | current | The time peroid user has kept login. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.6 | ColumnsessionType | read-only | current | login from http or telnet. |
| 1.3.6.1.4.1.171.10.134.2.1.102.1.1.7 | ColumnsessionIP | read-only | current | login ip through http or telnet. |
| 1.3.6.1.4.1.171.10.134.2.1.103 | NodecompanyACL | |||
| 1.3.6.1.4.1.171.10.134.2.1.103.1 | NodesysAclProfile | |||
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1 | TableaclL2ProfileTable | not-accessible | current | A Table contain the L2 acl profile infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1 | RowaclL2ProfileEntry | not-accessible | current | Entries of the aclL2ProfileTable |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.1 | ColumnaclL2ProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.2 | ColumnaclL2RuleCount | read-only | current | Rule count in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.3 | ColumnaclL2SrcMacMask | read-write | current | L2 source mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.4 | ColumnaclL2DstMacMask | read-write | current | L2 destination mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.5 | ColumnaclL28021pCheck | read-write | current | Configure to decide whether to do 802.1p field check. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.6 | ColumnaclL2VlanIdCheck | read-write | current | Configure to decide whether to do vlan id field check. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.7 | ColumnaclL2EtherTypeCheck | read-write | current | Configure to decide whether to do ether type check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.8 | ColumnaclL2ProfileStatus | read-create | current | This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait… |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2 | TableaclL3ProfileTable | not-accessible | current | A Table contain the L3 IPv4 acl profile infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1 | RowaclL3ProfileEntry | not-accessible | current | Entries of the aclIpv4ProfileTable |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.1 | ColumnaclL3ProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.2 | ColumnaclL3RuleCount | read-only | current | Rule count in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.3 | ColumnaclL3ProfileType | read-write | current | Current profile type, valid type is ipv4 and ipv6 |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.4 | ColumnaclL3Ip4SrcAddrMask | read-write | current | L3 IPv4 source address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.5 | ColumnaclL3Ip4DstAddrMask | read-write | current | L3 IPv4 destination address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.6 | ColumnaclL3Ip4DscpCheck | read-write | current | L3 IPv4 DSCP/ToS check or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.7 | ColumnaclL3Ip4TosCheck | read-write | current | L3 IPv4 DSCP/ToS check or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.8 | ColumnaclL3Ip4Protocol | read-write | current | Indicate the IP Protocol to be care in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.9 | ColumnaclL3Ip4ProtocolMask | read-write | current | L3 IPv4 protocol id mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.10 | ColumnaclL3Ip6SrcAddrMask | read-write | current | L3 IPv6 source address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.11 | ColumnaclL3Ip6DstAddrMask | read-write | current | L3 IPv6 destination address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.12 | ColumnaclL3Ip6TrafficClassCheck | read-write | current | Configure to decide whether to do ip6 Traffic Class check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.13 | ColumnaclL3IcmpTypeCheck | read-write | current | Configure to decide whether to do icmp type check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.14 | ColumnaclL3IcmpCodeCheck | read-write | current | Configure to decide whether to do icmp code check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.15 | ColumnaclL3IgmpTypeCheck | read-write | current | Configure to decide whether to do igmp type check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.16 | ColumnaclL3SrcPortMask | read-write | current | Source port filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.17 | ColumnaclL3DstPortMask | read-write | current | Destination port filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.18 | ColumnaclL3TcpFlagCheck | read-write | current | Configure to decide whether to do tcp flag check |
| 1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.19 | ColumnaclL3ProfileStatus | read-create | current | This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait… |
| 1.3.6.1.4.1.171.10.134.2.1.103.2 | NodesysAclRule | |||
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1 | TableaclL2RuleTable | not-accessible | current | A Table contain the L2 acl rule infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1 | RowaclL2RuleEntry | not-accessible | current | Entries of the aclL2RuleTable |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.1 | ColumnaclL2RuleProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.2 | ColumnaclL2RuleAccessID | read-only | current | The ACL rule access ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.3 | ColumnaclL2VlanId | read-write | current | Vlan id to be filter, 0 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.4 | ColumnaclL2SrcMac | read-write | current | L2 source mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.5 | ColumnaclL2DstMac | read-write | current | L2 destination mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.6 | ColumnaclL28021p | read-write | current | Ethernet header 802.1p value to be filter, -1 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.7 | ColumnaclL2EtherType | read-write | current | Ethernet type value to be filter, 0 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.8 | ColumnaclL2InPortList | read-write | current | Packet from which ports that this rule apply on. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.9 | ColumnaclL2Action | read-write | current | Action for a packet that hit this rule. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.10 | ColumnaclL2RateLimit | read-write | current | Rate limit value for the packet hit. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.11 | ColumnaclL2ReplaceDSCP | read-write | current | Replace the DSCP value configured. -1 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.12 | ColumnaclL2RuleStatus | read-create | current | operation of rule action |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2 | TableaclL3RuleTable | not-accessible | current | A Table contain the L3 IPv4 acl rule infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1 | RowaclL3RuleEntry | not-accessible | current | Entries of the acL3RuleTable |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.1 | ColumnaclL3RuleProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.2 | ColumnaclL3RuleAccessID | read-only | current | The ACL rule access ID. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.3 | ColumnaclL3IP4SrcAddr | read-write | current | ipv4 source address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.4 | ColumnaclL3IP4DstAddr | read-write | current | ipv4 destination address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.5 | ColumnaclL3IP4DSCP | read-write | current | ipv4 dscp value to filter, -1 means do not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.6 | ColumnaclL3IP4ToS | read-write | current | ipv4 tos value to filter, -1 means do not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.7 | ColumnaclL3IP4Protocol | read-write | current | ipv4 protocol value to filter, 255 means do not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.8 | ColumnaclL3IP6SrcAddr | read-write | current | ipv6 source address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.9 | ColumnaclL3IP6DstAddr | read-write | current | ipv6 destination address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.10 | ColumnaclL3Ip6TrafficClass | read-write | current | ipv6 traffic class to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.11 | ColumnaclL3IcmpType | read-write | current | the icmp type value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.12 | ColumnaclL3IcmpCode | read-write | current | the icmp code value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.13 | ColumnaclL3IgmpType | read-write | current | the igmp type value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.14 | ColumnaclL3SrcPort | read-write | current | the source port to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.15 | ColumnaclL3DstPort | read-write | current | the destination port to filter |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.16 | ColumnaclL3TcpFlagURG | read-write | current | check tcp urg flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.17 | ColumnaclL3TcpFlagACK | read-write | current | check tcp ack flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.18 | ColumnaclL3TcpFlagPSH | read-write | current | check tcp psh flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.19 | ColumnaclL3TcpFlagRST | read-write | current | check tcp rst flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.20 | ColumnaclL3TcpFlagSYN | read-write | current | check tcp syn flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.21 | ColumnaclL3TcpFlagFIN | read-write | current | check tco fin flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.22 | ColumnaclL3InPortList | read-write | current | Packet from which ports that this rule apply on. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.23 | ColumnaclL3Action | read-write | current | Action for a packet that hit this rule. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.24 | ColumnaclL3RateLimit | read-write | current | Rate limit value for the packet hit. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.25 | ColumnaclL3ReplaceDSCP | read-write | current | replace dscp value to configured, -1 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.26 | ColumnaclL3RuleStatus | read-create | current | operation of rule action. |
| 1.3.6.1.4.1.171.10.134.2.1.103.3 | NodesysAclStatistic | |||
| 1.3.6.1.4.1.171.10.134.2.1.103.3.1 | ScalaraclTotalProfile | read-only | current | Total profile entry count |
| 1.3.6.1.4.1.171.10.134.2.1.103.3.2 | ScalaraclUsedProfile | read-only | current | Profile entry number that in use |
| 1.3.6.1.4.1.171.10.134.2.1.103.3.3 | ScalaraclTotalRule | read-only | current | Total rule entry count |
| 1.3.6.1.4.1.171.10.134.2.1.103.3.4 | ScalaraclUsedRule | read-only | current | Rule entry number that in use |
| 1.3.6.1.4.1.171.10.134.2.1.104 | NodecompanyCPUACL | |||
| 1.3.6.1.4.1.171.10.134.2.1.104.1 | NodesysCpuAclProfile | |||
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1 | TablecpuAclL2ProfileTable | not-accessible | current | A Table contain the L2 acl profile infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1 | RowcpuAclL2ProfileEntry | not-accessible | current | Entries of the cpuAclL2ProfileTable |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.1 | ColumncpuAclL2ProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.2 | ColumncpuAclL2RuleCount | read-only | current | Rule count in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.3 | ColumncpuAclL2SrcMacMask | read-write | current | L2 source mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.4 | ColumncpuAclL2DstMacMask | read-write | current | L2 destination mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.5 | ColumncpuAclL28021pCheck | read-write | current | Configure to decide whether to do 802.1p field check. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.6 | ColumncpuAclL2VlanIdCheck | read-write | current | Configure to decide whether to do vlan id field check. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.7 | ColumncpuAclL2EtherTypeCheck | read-write | current | Configure to decide whether to do ether type check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.8 | ColumncpuAclL2ProfileStatus | read-create | current | This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait… |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2 | TablecpuAclL3ProfileTable | not-accessible | current | A Table contain the L3 IPv4 acl profile infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1 | RowcpuAclL3ProfileEntry | not-accessible | current | Entries of the aclIpv4ProfileTable |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.1 | ColumncpuAclL3ProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.2 | ColumncpuAclL3RuleCount | read-only | current | Rule count in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.3 | ColumncpuAclL3ProfileType | read-write | current | Current profile type, valid type is ipv4 and ipv6 |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.4 | ColumncpuAclL3Ip4SrcAddrMask | read-write | current | L3 IPv4 source address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.5 | ColumncpuAclL3Ip4DstAddrMask | read-write | current | L3 IPv4 destination address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.6 | ColumncpuAclL3Ip4DscpCheck | read-write | current | L3 IPv4 DSCP/ToS check or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.7 | ColumncpuAclL3Ip4Protocol | read-write | current | Indicate the IP Protocol to be care in this profile. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.8 | ColumncpuAclL3Ip4ProtocolMask | read-write | current | L3 IPv4 protocol id mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.9 | ColumncpuAclL3Ip4IcmpTypeCheck | read-write | current | Configure to decide whether to do icmp type check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.10 | ColumncpuAclL3Ip4IcmpCodeCheck | read-write | current | Configure to decide whether to do icmp code check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.11 | ColumncpuAclL3Ip4IgmpTypeCheck | read-write | current | Configure to decide whether to do igmp type check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.12 | ColumncpuAclL3Ip4SrcPortMask | read-write | current | Source port filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.13 | ColumncpuAclL3Ip4DstPortMask | read-write | current | Destination port filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.14 | ColumncpuAclL3Ip4TcpFlagCheck | read-write | current | Configure to decide whether to do tcp flag check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.15 | ColumncpuAclL3Ip6SrcAddrMask | read-write | current | L3 IPv6 source address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.16 | ColumncpuAclL3Ip6DstAddrMask | read-write | current | L3 IPv6 destination address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.17 | ColumncpuAclL3Ip6TrafficClassCheck | read-write | current | Configure to decide whether to do ip6 Traffic Class check |
| 1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.18 | ColumncpuAclL3ProfileStatus | read-create | current | This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait… |
| 1.3.6.1.4.1.171.10.134.2.1.104.2 | NodesysCpuAclRule | |||
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1 | TablecpuAclL2RuleTable | not-accessible | current | A Table contain the L2 acl rule infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1 | RowcpuAclL2RuleEntry | not-accessible | current | Entries of the cpuAclL2RuleTable |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.1 | ColumncpuAclL2RuleProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.2 | ColumncpuAclL2RuleAccessID | read-only | current | The ACL rule access ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.3 | ColumncpuAclL2VlanId | read-write | current | Vlan id to be filter, 0 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.4 | ColumncpuAclL2SrcMac | read-write | current | L2 source mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.5 | ColumncpuAclL2DstMac | read-write | current | L2 destination mac address filter mask. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.6 | ColumncpuAclL28021p | read-write | current | Ethernet header 802.1p value to be filter, 0 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.7 | ColumncpuAclL2EtherType | read-write | current | Ethernet type value to be filter, 0 means not care. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.8 | ColumncpuAclL2InPortList | read-write | current | Packet from which ports that this rule apply on. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.9 | ColumncpuAclL2Action | read-write | current | Action for a packet that hit this rule. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.10 | ColumncpuAclL2RuleStatus | read-create | current | operation of rule action |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2 | TablecpuAclL3RuleTable | not-accessible | current | A Table contain the L3 IPv4 acl rule infomation. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1 | RowcpuAclL3RuleEntry | not-accessible | current | Entries of the acL3RuleTable |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.1 | ColumncpuAclL3RuleProfileID | read-only | current | The ACL Profile ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.2 | ColumncpuAclL3RuleAccessID | read-only | current | The ACL rule access ID. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.3 | ColumncpuAclL3IP4SrcAddr | read-write | current | ipv4 source address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.4 | ColumncpuAclL3IP4DstAddr | read-write | current | ipv4 destination address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.5 | ColumncpuAclL3IP4DSCP | read-write | current | ipv4 dscp value to filter, -1 means do not care. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.6 | ColumncpuAclL3IP4Protocol | read-write | current | ipv4 protocol value to filter, 255 means do not care. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.7 | ColumncpuAclL3IP4IcmpType | read-write | current | the icmp type value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.8 | ColumncpuAclL3IP4IcmpCode | read-write | current | the icmp code value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.9 | ColumncpuAclL3IP4IgmpType | read-write | current | the igmp type value to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.10 | ColumncpuAclL3IP4SrcPort | read-write | current | the source port to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.11 | ColumncpuAclL3IP4DstPort | read-write | current | the destination port to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.12 | ColumncpuAclL3IP4TcpFlagURG | read-write | current | check tcp urg flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.13 | ColumncpuAclL3IP4TcpFlagACK | read-write | current | check tcp ack flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.14 | ColumncpuAclL3IP4TcpFlagPSH | read-write | current | check tcp psh flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.15 | ColumncpuAclL3IP4TcpFlagRST | read-write | current | check tcp rst flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.16 | ColumncpuAclL3IP4TcpFlagSYN | read-write | current | check tcp syn flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.17 | ColumncpuAclL3IP4TcpFlagFIN | read-write | current | check tco fin flag set or not. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.18 | ColumncpuAclL3InPortList | read-write | current | Packet from which ports that this rule apply on. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.19 | ColumncpuAclL3Action | read-write | current | Action for a packet that hit this rule. |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.20 | ColumncpuAclL3IP6SrcAddr | read-write | current | ipv6 source address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.21 | ColumncpuAclL3IP6DstAddr | read-write | current | ipv6 destination address to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.22 | ColumncpuAclL3Ip6TrafficClass | read-write | current | ipv6 traffic class to filter |
| 1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.23 | ColumncpuAclL3RuleStatus | read-create | current | operation of rule action |
| 1.3.6.1.4.1.171.10.134.2.1.104.3 | NodesysCpuAclStatistic | |||
| 1.3.6.1.4.1.171.10.134.2.1.104.3.1 | ScalarcpuAclTotalProfile | read-only | current | Total profile entry count |
| 1.3.6.1.4.1.171.10.134.2.1.104.3.2 | ScalarcpuAclUsedProfile | read-only | current | Profile entry number that in use |
| 1.3.6.1.4.1.171.10.134.2.1.104.3.3 | ScalarcpuAclTotalRule | read-only | current | Total rule entry count |
| 1.3.6.1.4.1.171.10.134.2.1.104.3.4 | ScalarcpuAclUsedRule | read-only | current | Rule entry number that in use |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | current | The Bridge-Identifier as used in the Spanning Tree Protocol to uniquely identify a bridge. Its first two octets (in network byte order) contain a priority value and its last 6 octets contain the MAC address used to refe… |
| Ipv6Address | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |
| LldpChassisId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan… |
| LldpChassisIdSubtype | INTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) } | current | This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis componen… |
| LldpLinkAggStatusMap | BITS { aggCapable(0), aggEnabled(1) } | current | This TC describes the link aggregation status. The bit 'aggCapable(0)' indicates the link is capable of being aggregated. The bit 'aggEnabled(1)' indicates the link is currently in aggregation. |
| LldpManAddress | OCTET STRING (SIZE (1..31)) | current | The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such … |
| LldpManAddrIfSubtype | INTEGER { unknown(1), ifIndex(2), systemPortNumber(3) } | current | This TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' repre… |
| LldpPortId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th… |
| LldpPortIdSubtype | INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } | current | This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The … |
| LldpPortList | OCTET STRING(SIZE(0..512)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| LldpPortNumber | Integer32(1..4096) | current | Each port contained in the chassis (that is known to the LLDP agent) is uniquely identified by a port number. A port number has no mandatory relationship to an InterfaceIndex object (of the interfaces MIB, IETF RFC 2863… |
| LldpPowerPortClass | INTEGER { pClassPSE(1), pClassPD(2) } | current | This TC describes the Power over Ethernet (PoE) port class. |
| LldpSystemCapabilitiesMap | BITS { other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7) } | current | This TC describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'b… |
| OperationResponseStatus | INTEGER { responseReceived(1), unknown(2), internalError(3), requestTimedOut(4), unknownDestinationAddress(5), noRouteToTarget(6), interfaceInactiveToTarget(7), arpFailure(8), maxConcurrentLimitReached(9), unableToResolveDnsName(10), invalidHostAddress(11) } | current | Used to report the result of an operation: responseReceived(1) - Operation is completed successfully. unknown(2) - Operation failed due to unknown error. internalError(3) - An implementation detected an error in its own… |
| OwnerString | DisplayString (SIZE (0..32)) | current | This data type is used to model an administratively assigned name of the owner of a resource. Implementations must accept values composed of well-formed NVT ASCII sequences. In addition, implementations should accept va… |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| RmonStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | current | The status of a table entry. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry. That is, it effectively disassociates the mapping identified with said entry. It is an imp… |
| TimeFilter | TimeTicks | current | To be used for the index to a table. Allows an application to download only those rows changed since a particular time. Note that this is not a history mechanism. Only current values of underlying objects are returned; … |
| Timeout | INTEGER | current | A STP timer in units of 1/100 seconds To convert a Timeout value into a value in units of 1/256 seconds, the following algorithm should be used: b = floor( (n * 256) / 100) where: floor = quotient [ignore remainder] n i… |
| VlanIndex | Unsigned32 | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |
| ZeroBasedCounter32 | Gauge32 | current | This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value … |