DGS-3710-12C-L2MGMT-MIB
157 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
| DLINK-ID-REC-MIB | AgentNotifyLevel |
| Q-BRIDGE-MIB | --PortList |
| RFC1155-SMI | Counter |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| SW3700PRIMGMT-MIB | dgs3712c |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.102.1.5.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information. | ||
| 1.3.6.1.4.1.171.11.102.1.5.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.1.2 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.1.4 | ScalarswDevInfoFrontPanelLedStatus | read-only | current | This object is a set of system LED indications. The first four octets are defined as system LED. The first two octets are currently unused and must be set to z… |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.5 | ScalarswL2DevCtrlSnmpTrapState | read-write | current | This object controls the SNMP trap status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.6 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | When the object is set to active, all statistical counters will be cleared. If set to normal, no action. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.7 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.8 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.9 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 . |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.10 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval, in seconds, which will trigger MAC notification messages. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.14 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.14.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.14.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object designates TCP ports. When Telnet is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.16 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which previously created VLANs are included in the System IP Interface. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls the Web status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object designates TCP ports. When Web is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.18 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.19 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.20 | ScalarswL2DevCtrlIpAutoconfig | read-write | current | This object controls the IP auto configuration state. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21 | NodeswL2DevCtrlCFM | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21.1 | ScalarswL2DevCtrlCFMState | read-write | current | This object indicates the CFM global state. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21.2 | TableswL2DevCtrlCFMPortTable | not-accessible | current | A table containing CFM state of speicified ports. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21.2.1 | RowswL2DevCtrlCFMPortEntry | not-accessible | current | The entry of CFM state on speicified ports. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21.2.1.1 | ColumnswL2DevCtrlCFMPortIndex | not-accessible | current | This object indicates the port-num. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.2.21.2.1.2 | ColumnswL2DevCtrlCFMPortState | read-write | current | This object indicates the CFM state on per-port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by … |
| 1.3.6.1.4.1.171.11.102.1.5.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device… |
| 1.3.6.1.4.1.171.11.102.1.5.2.2 | NodeswL2VLANMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.2.1 | TableswL2VlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.1.1 | RowswL2VlanStaticEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.1.1.1 | ColumnswL2VlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.1.1.2 | ColumnswL2VLANAdvertisement | read-write | current | This object indicates if the advertisement is active or not. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.2 | ScalarswL2PVIDAutoAssignmentState | read-write | current | This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID can only be changed by PVID configuration (user changes explicitly)… |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.3 | TableswL2VlanPortInfoTable | not-accessible | current | A table containing vlan and port role information of each port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.3.1 | RowswL2VlanPortInfoEntry | not-accessible | current | The table entry of vlan port information. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.3.1.1 | ColumnswL2VlanPortInfoPortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.3.1.2 | ColumnswL2VlanPortInfoVid | read-only | current | The VLAN-ID assigned to a special port |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.3.1.3 | ColumnswL2VlanPortInfoPortRole | read-only | current | The port role of a special port.when none,it means this port is not belong to the vlan. |
| 1.3.6.1.4.1.171.11.102.1.5.2.2.7 | ScalarswL2NniGvrpBpduAddress | read-write | current | Specifies the GVRP's BPDU MAC address of NNI port In Q-in_Q status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.2 | ColumnswL2PortInfoMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.3 | ColumnswL2PortInfoUnitID | read-only | current | Indicates ID of the unit in the system |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.4 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.5 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.6 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.1.1.8 | ColumnswL2PortInfoErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.2 | ColumnswL2PortCtrlMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.3 | ColumnswL2PortCtrlUnitIndex | read-only | current | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.4 | ColumnswL2PortCtrlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.5 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.6 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.7 | ColumnswL2PortCtrlLearningState | read-write | current | This object decides if the port is locked or not. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.8 | ColumnswL2PortCtrlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.10 | ColumnswL2PortCtrlMDIXState | read-write | current | This object configures the MDIX setting of the port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.2.1.15 | ColumnswL2PortCtrlEEEState | read-write | current | This object indicates the EEE state of special port. Note: If the Medium Type is fiber,the EEE state is always disabled. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configures the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.4 | ScalarswL2PortCtrlJumboFrameMaxSize | read-only | current | This object describes how many bytes the max jumbo frame is. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.6 | TableswL2PortCounterCtrlTable | not-accessible | current | A table that used to clear counter information about every port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.6.1 | RowswL2PortCounterCtrlEntry | not-accessible | current | A list of entry used to clear counter information for each port of the device. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.6.1.1 | ColumnswL2PortCounterCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.6.1.2 | ColumnswL2PortCounterClearCtrl | read-write | current | This object indicates if to clear the counters for each port of the device or not. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7 | TableswL2PortErrTable | not-accessible | current | A table that contains error information for each port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7.1 | RowswL2PortErrEntry | not-accessible | current | A list of information regarding port errors on the device. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7.1.1 | ColumnswL2PortErrPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7.1.2 | ColumnswL2PortErrPortState | read-only | current | This object indicates the port state is enabled or disabled. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7.1.3 | ColumnswL2PortErrPortConnStatus | read-only | current | This object indicates whether the PortStatus is err-disabled or not. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.7.1.4 | ColumnswL2PortErrPortReason | read-only | current | This object describes if the reason for the port error is STP LBD or Storm control. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.9 | TableswL2PortDropCounterTable | not-accessible | current | A table that contains information for each port drop counter. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.9.1 | RowswL2PortDropCounterEntry | not-accessible | current | A list of information for each port drop counter. |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.9.1.1 | ColumnswL2PortDropCounterPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.102.1.5.2.3.9.1.6 | ColumnswL2PortIngressBandwidthControlDrops | read-only | current | The total number of packets discarded by port ingress bandwidth control. |
| 1.3.6.1.4.1.171.11.102.1.5.2.8 | NodeswL2DhcpRelayMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.9 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.9.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information that specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | The object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master… |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for … |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group . |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.5 | TableswL2TrunkLACPPortTable | not-accessible | current | This table specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.5.1 | RowswL2TrunkLACPPortEntry | not-accessible | current | A list of information specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.5.1.1 | ColumnswL2TrunkLACPPortIndex | read-only | current | The index of logical port LACP. |
| 1.3.6.1.4.1.171.11.102.1.5.2.9.5.1.2 | ColumnswL2TrunkLACPPortState | read-write | current | The state of logical port LACP. |
| 1.3.6.1.4.1.171.11.102.1.5.2.10 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.10.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the seq… |
| 1.3.6.1.4.1.171.11.102.1.5.2.10.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the port where ingress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.102.1.5.2.10.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the port where egress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.102.1.5.2.10.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.102.1.5.2.14 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.14.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.102.1.5.2.14.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information which specifies the port with its traffic forwarding list. |
| 1.3.6.1.4.1.171.11.102.1.5.2.14.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.14.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list to which the specific port can forward traffic. |
| 1.3.6.1.4.1.171.11.102.1.5.2.17 | NodeswL2MulticastFilterMode | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.17.1 | TableswL2MulticastFilterModeVlanTable | not-accessible | current | A table that contains information about VLAN multicast filter mode. |
| 1.3.6.1.4.1.171.11.102.1.5.2.17.1.1 | RowswL2MulticastFilterModeVlanEntry | not-accessible | current | A list of multicast filter mode information for each VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.17.1.1.1 | ColumnswL2MulticastFilterVid | read-only | current | Indicates VID for each VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.17.1.1.2 | ColumnswL2MulticastFilterVlanMode | read-write | current | Specifies multicast filter mode for each VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18 | NodeswL2LoopDetectMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1 | NodeswL2LoopDetectCtrl | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1.1 | ScalarswL2LoopDetectAdminState | read-write | current | This object indicates the loopback detection status for the system. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1.2 | ScalarswL2LoopDetectInterval | read-write | current | This object indicates the interval value, the range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1.3 | ScalarswL2LoopDetectRecoverTime | read-write | current | This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1.4 | ScalarswL2LoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.1.5 | ScalarswL2LoopDetectTrapMode | read-write | current | This object indicates the loopback detection trap mode for the system. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2 | NodeswL2LoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1 | TableswL2LoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1.1 | RowswL2LoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1.1.1 | ColumnswL2LoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1.1.2 | ColumnswL2LoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1.1.3 | ColumnswL2LoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.11.102.1.5.2.18.2.1.1.4 | ColumnswL2LoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.24 | NodeswL2DhcpLocalRelayMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.24.1 | ScalarswL2DhcpLocalRelayState | read-write | current | This object indicates the status of the DHCP local relay function of the switch. |
| 1.3.6.1.4.1.171.11.102.1.5.2.24.2 | TableswL2DhcpLocalRelayVLANTable | not-accessible | current | This table is used to manage the DHCP local relay status for each VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.24.2.1 | RowswL2DhcpLocalRelayVLANEntry | not-accessible | current | This object lists the current VLANs in the switch and their corresponding DHCP local relay status. |
| 1.3.6.1.4.1.171.11.102.1.5.2.24.2.1.1 | ColumnswL2DhcpLocalRelayVLANID | read-only | current | This object shows the VIDs of the current VLANS in the switch. |
| 1.3.6.1.4.1.171.11.102.1.5.2.24.2.1.2 | ColumnswL2DhcpLocalRelayVLANState | read-write | current | This object indicates the status of the DHCP relay function of the VLAN. |
| 1.3.6.1.4.1.171.11.102.1.5.2.30 | NodeswL2SyncEthernetMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.30.1 | ScalarswL2SyncEthernetState | read-write | current | This object indicates the synchronous ethernet state. |
| 1.3.6.1.4.1.171.11.102.1.5.2.30.2 | ScalarswL2SyncEthernetSourcePort | read-write | current | This object indicates the port which the synchronous ethernet get the clock from. The port number is the sequential (logical) number which is also applied to t… |
| 1.3.6.1.4.1.171.11.102.1.5.2.30.3 | ScalarswL2SyncEthernetSourceClock | read-only | current | This object indicates the clock use System internal or Synchronous Ethernet with partner get the external clock from which port and etc. system_clock: identify… |
| 1.3.6.1.4.1.171.11.102.1.5.2.100 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1 | NodeswL2Notify | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.1 | NodeswL2NotifyMgmt | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2 | NodeswL2NotifyPrefix | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0 | NodeswL2NotifFirmware | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.1 | NotificationswL2macNotification | current | This trap indicates the MAC addresses variation in address table . | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.3 | NotificationswL2PortLoopOccurred | current | The trap is sent when a Port loop occurs. | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.4 | NotificationswL2PortLoopRestart | current | The trap is sent when a Port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.5 | NotificationswL2VlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.6 | NotificationswL2VlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.0.7 | NotificationswL2DyingGaspPowerLost | current | OAM dying gasp event occurred on device when the power lost. | |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates the last time reboot information. |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.1.3 | ScalarswL2VlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that detected a loopback. |
| 1.3.6.1.4.1.171.11.102.1.5.2.100.1.2.1.4 | ScalarswL2DyingGaspMac | read-only | current | This object indicates the mac address of power-lost device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6Address | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |