DGS-6600-STP-EXT-MIB
77 objects
The MIB module for managing MSTP.
Imported Objects
| DGS-6600-ID-MIB | dgs6600-l2 |
| RFC1155-SMI | Counter |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BEGIN IMPORTS MODULE-IDENTITY from OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.120.100.2.2 | Identitydgs6600StpExtMIB | The MIB module for managing MSTP. | ||
| 1.3.6.1.4.1.171.10.120.100.2.2.1 | NodeswMSTPGblMgmt | |||
| 1.3.6.1.4.1.171.10.120.100.2.2.1.1 | ScalarswMSTPStpAdminState | read-write | current | This object indicates the spanning tree state of the bridge. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.2 | ScalarswMSTPStpVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.3 | ScalarswMSTPStpMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of StpForwardD… |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.4 | ScalarswMSTPStpHelloTime | read-write | current | The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP … |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.5 | ScalarswMSTPStpForwardDelay | read-write | current | This value controls how long a port changes its spanning state from blocking to learning state and from learning to forwarding state. Note that the range for t… |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.6 | ScalarswMSTPStpMaxHops | read-write | current | This value applies to all spanning trees within an MST Region for which the bridge is the Regional Root. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.7 | ScalarswMSTPStpTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.8 | ScalarswMSTPStpForwardBPDU | read-write | current | The enabled/disabled status is used to forward BPDU to a non STP port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.9 | ScalarswMSTPStpLBD | read-write | current | The enabled/disabled status is used in Loop-back prevention. |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.10 | ScalarswMSTPStpLBDRecoverTime | read-write | current | The period of time (in seconds) in which the STP module keeps checking the BPDU loop status. The valid range is 60 to 1000000. If this value is set from 1 to 5… |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.11 | ScalarswMSTPNniBPDUAddress | read-write | current | Specifies the BPDU MAC address of the NNI port in Q-in-Q status. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2 | NodeswMSTPCtrl | |||
| 1.3.6.1.4.1.171.10.120.100.2.2.2.1 | ScalarswMSTPName | read-write | current | The object indicates the name of the MST Configuration Identification. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.2 | ScalarswMSTPRevisionLevel | read-write | current | The object indicates the revision level of the MST Configuration Identification. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3 | TableswMSTPInstanceCtrlTable | not-accessible | current | A table that contains MSTP instance information. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1 | RowswMSTPInstanceCtrlEntry | not-accessible | current | A list of MSTP instance information. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.1 | ColumnswMSTPInstId | read-only | current | This object indicates the specific instance. An MSTP Instance ID (MSTID) of zero is used to identify the CIST. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.2 | ColumnswMSTPInstVlanRangeList1to64 | read-create | current | This object indicates the VLAN range (1-512) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.3 | ColumnswMSTPInstVlanRangeList65to128 | read-create | current | This object indicates the VLAN range (513-1024) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.4 | ColumnswMSTPInstVlanRangeList129to192 | read-create | current | This object indicates the VLAN range (1025-1536) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.5 | ColumnswMSTPInstVlanRangeList193to256 | read-create | current | This object indicates the VLAN range(1537-2048) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.6 | ColumnswMSTPInstVlanRangeList257to320 | read-create | current | This object indicates the VLAN range (2049-2560) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.7 | ColumnswMSTPInstVlanRangeList321to384 | read-create | current | This object indicates the VLAN range (2561-3072) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.8 | ColumnswMSTPInstVlanRangeList385to448 | read-create | current | This object indicates the VLAN range (3073-3584) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.9 | ColumnswMSTPInstVlanRangeList449to512 | read-create | current | This object indicates the VLAN range (3585-4096) that belongs to the instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.10 | ColumnswMSTPInstType | read-only | current | This object indicates the type of instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.11 | ColumnswMSTPInstStatus | read-only | current | The instance state that could be enabled/disabled. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.12 | ColumnswMSTPInstPriority | read-create | current | The priority of the instance. The priority must be divisible by 4096 |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.13 | ColumnswMSTPInstDesignatedRootBridge | read-only | current | The bridge identifier of the CIST. For MST instance, this object is unused. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.14 | ColumnswMSTPInstExternalRootCost | read-only | current | The path cost between MST Regions from the transmitting bridge to the CIST Root. For MST instance this object is unused. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.15 | ColumnswMSTPInstRegionalRootBridge | read-only | current | For CIST, Regional Root Identifier is the Bridge Identifier of the single bridge in a Region whose CIST Root Port is a Boundary Port, or the Bridge Identifier … |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.16 | ColumnswMSTPInstInternalRootCost | read-only | current | For CIST, the internal path cost is the path cost to the CIST Regional Root; For MSTI, the internal path cost is the path cost to the MSTI Regional Root for th… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.17 | ColumnswMSTPInstDesignatedBridge | read-only | current | The Bridge Identifier for the transmitting bridge for this CIST or MSTI |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.18 | ColumnswMSTPInstRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the CIST or MSTI root bridge. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.19 | ColumnswMSTPInstMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.20 | ColumnswMSTPInstForwardDelay | read-only | current | This value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The valu… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.21 | ColumnswMSTPInstLastTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.22 | ColumnswMSTPInstTopChangesCount | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.23 | ColumnswMSTPInstRemainHops | read-only | current | The root bridge in the instance for MSTI always sends a BPDU with a maximum hop count. When a switch receives this BPDU, it decrements the received maximum hop… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.24 | ColumnswMSTPInstRowStatus | read-create | current | This object indicates the RowStatus of this entry. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4 | TableswMSTPPortTable | not-accessible | current | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1 | RowswMSTPPortEntry | not-accessible | current | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.1 | ColumnswMSTPPort | read-only | current | The port number of the port for this entry. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.2 | ColumnswMSTPPortAdminHelloTime | read-write | current | The amount of time between the transmission of BPDU by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundr… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.3 | ColumnswMSTPPortOperHelloTime | read-only | current | The actual value of the hello time. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.4 | ColumnswMSTPSTPPortEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.5 | ColumnswMSTPPortExternalPathCost | read-write | current | The contribution of this port to the path cost of paths towards the CIST root which include this port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.6 | ColumnswMSTPPortMigration | read-write | current | When operating in MSTP mode or RSTP mode, writing TRUE(1) to this object forces this port to transmit MST BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.7 | ColumnswMSTPPortAdminEdgePort | read-write | current | The value of the Edge Port parameter. A value of TRUE indicates that this port should be assumed as an edge-port and a value of FALSE indicates that this port … |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.8 | ColumnswMSTPPortOperEdgePort | read-only | current | It is the acutual value of the edge port status. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.9 | ColumnswMSTPPortAdminP2P | read-write | current | The point-to-point status of the LAN segment attached to this port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.10 | ColumnswMSTPPortOperP2P | read-only | current | It is the actual value of the P2P status. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.11 | ColumnswMSTPPortLBD | read-write | current | The enabled/disabled status is used for Loop-back prevention attached to this port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.12 | ColumnswMSTPPortBPDUFiltering | read-write | current | The enabled/disabled status is used for BPDU Filtering attached to this port.BPDU filtering allows the administrator to prevent the system from sending or even… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.13 | ColumnswMSTPPortRestrictedRole | read-write | current | If TRUE, causes the port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.14 | ColumnswMSTPPortRestrictedTCN | read-write | current | If TRUE, causes the port not to propagate received topology change notifications and topology changes to other Ports. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.15 | ColumnswMSTPPortOperFilterBpdu | read-only | current | It is the actual value of the hardware filter BPDU status. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.16 | ColumnswMSTPPortRecoverFilterBpdu | read-write | current | When operating in BPDU filtering mode, writing TRUE(1) to this object sets this port to receive BPDUs to the hardware. Any other operation on this object has n… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5 | TableswMSTPMstPortTable | not-accessible | current | A table that contains port-specific information for the MST Protocol. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1 | RowswMSTPMstPortEntry | not-accessible | current | A list of information maintained by every port about the MST state for that port. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.1 | ColumnswMSTPMstPort | read-only | current | The port number of the port for this entry. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.2 | ColumnswMSTPMstPortInsID | read-only | current | This object indicates the MSTP Instance ID (MSTID). |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.3 | ColumnswMSTPMstPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment on the corresponding Spanning Tree instance. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.4 | ColumnswMSTPMstPortInternalPathCost | read-write | current | This is the value of this port to the path cost of paths towards the MSTI root. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.5 | ColumnswMSTPMstPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.6 | ColumnswMSTPMstPortStatus | read-only | current | When the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the por… |
| 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.7 | ColumnswMSTPMstPortRole | read-only | current | When the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabl… |
| 1.3.6.1.4.1.171.10.120.100.2.2.11 | NodeswMSTPTraps | |||
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1 | NodeswMSTPNotify | |||
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0 | NodeswMSTPNotifyPrefix | |||
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.1 | NotificationswMSTPPortLBDTrap | current | When STP port loopback detect is enabled, a trap will be generated. | |
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.2 | NotificationswMSTPPortBackupTrap | current | When the STP port role goes to backup (defined in the STP standard), a trap will be generated. | |
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.3 | NotificationswMSTPPortAlternateTrap | current | When the STP port role goes to alternate (defined in the STP standard), a trap will be generated. | |
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.4 | NotificationswMSTPHwFilterStatusChange | current | This trap is sent when a BPDU hardware filter status port changes. | |
| 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.5 | NotificationswMSTPRootRestrictedChange | current | This trap is sent when a restricted role state port changes. |