DGS-6600-VPLS-GENERIC-MIB
51 objects
Copyright (C) The IETF Trust (2012). The initial version of this MIB module was published in RFC XXXX. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains generic managed object definitions for Virtual Private LAN Services as define in [RFC4762] and [RFC4761] This MIB module enables the use of any underlying Pseudowire network.
Imported Objects
| DGS-6600-ID-MIB | 9 dgs6600-mpls |
| PW-STD-MIB | -- RFC3411 pwIndex |
| SNMP-FRAMEWORK-MIB | -- RFC2579 SnmpAdminString |
| SNMPv2-CONF | -- RFC2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | -- RFC2580 TruthValue RowStatus StorageType |
| VPN-TC-STD-MIB | VPNIdOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.120.100.4.1 | Identitydgs6600VplsGenericMIB | Copyright (C) The IETF Trust (2012). The initial version of this MIB module was published in RFC XXXX. For full legal notices see the RFC itself or see: http:/… | ||
| 1.3.6.1.4.1.171.10.120.100.4.1.0 | NodevplsNotifications | |||
| 1.3.6.1.4.1.171.10.120.100.4.1.0.1 | NotificationvplsStatusChanged | current | The vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service. | |
| 1.3.6.1.4.1.171.10.120.100.4.1.0.2 | NotificationvplsFwdFullAlarmRaised | current | The vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWater… | |
| 1.3.6.1.4.1.171.10.120.100.4.1.0.3 | NotificationvplsFwdFullAlarmCleared | current | The vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWater… | |
| 1.3.6.1.4.1.171.10.120.100.4.1.1 | NodevplsObjects | |||
| 1.3.6.1.4.1.171.10.120.100.4.1.1.1 | ScalarvplsConfigIndexNext | read-only | current | This object contains an appropriate value to be used for vplsConfigIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2 | TablevplsConfigTable | not-accessible | current | This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1 | RowvplsConfigEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VP… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.1 | ColumnvplsConfigIndex | not-accessible | current | Unique index for the conceptual row identifying a VPLS service. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.2 | ColumnvplsConfigName | read-create | current | A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.3 | ColumnvplsConfigDescr | read-create | current | A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length o… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.4 | ColumnvplsConfigAdminStatus | read-create | current | The desired administrative state of the VPLS service. If the administrative status of the VPLS service is changed to enabled then this service is able to utili… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.6 | ColumnvplsConfigMacLearning | read-create | current | This object specifies if MAC Learning is enabled in this service. If this object is true then MAC Learning is enabled. If false, then MAC Learning is disabled. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.7 | ColumnvplsConfigDiscardUnknownDest | read-create | current | If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are proces… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.8 | ColumnvplsConfigMacAging | read-create | current | If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.10 | ColumnvplsConfigFwdFullHighWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.11 | ColumnvplsConfigFwdFullLowWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.12 | ColumnvplsConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.13 | ColumnvplsConfigMtu | read-create | current | The value of this object specifies the MTU of this vpls instance. This can be used to limit the MTU to a value lower than the MTU supported by the associated P… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.14 | ColumnvplsConfigVpnId | read-only | current | This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.15 | ColumnvplsConfigStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.3 | TablevplsStatusTable | not-accessible | current | This table provides information for monitoring Virtual Private Lan Services (VPLS). |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.3.1 | RowvplsStatusEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VP… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.1 | ColumnvplsStatusOperStatus | read-only | current | The current operational state of this VPLS Service. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.2 | ColumnvplsStatusPeerCount | read-only | current | This objects specifies the number of peers (pseudowires) present in this VPLS instance. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4 | TablevplsPwBindTable | not-accessible | current | This table provides an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseudowire association. Pseudowir… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4.1 | RowvplsPwBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in t… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.1 | ColumnvplsPwBindConfigType | read-create | current | The value of this object indicates whether the Pseudo Wire binding was created manually or via Auto-Discovery. The value of this object must be specifed when t… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.2 | ColumnvplsPwBindType | read-create | current | The value of this object indicates whether the pseudowire binding is of type mesh or spoke. The value of this object must be specified when the row is created … |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.3 | ColumnvplsPwBindRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.4 | ColumnvplsPwBindStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5 | TablevplsBgpADConfigTable | not-accessible | current | This table specifies information for configuring BGP Auto-Discovery parameters for a given VPLS service. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5.1 | RowvplsBgpADConfigEntry | not-accessible | current | A row in this table indicates that BGP based Auto- Discovery is in use for this instance of VPLS. A row in this table is indexed by vplsConfigIndex, which uniq… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.1 | ColumnvplsBgpADConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.2 | ColumnvplsBgpADConfigPrefix | read-create | current | In case of auto-discovery the default prefix advertised is the IP address of the loopback. In case the user wants to override the loopback address, vplsBgpADCo… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.3 | ColumnvplsBgpADConfigVplsId | read-create | current | VplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.4 | ColumnvplsBgpADConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.7 | ScalarvplsStatusNotifEnable | read-write | current | If this object is set to true(1), then it enables the emission of vplsStatusChanged notification; otherwise this notification is not emitted. |
| 1.3.6.1.4.1.171.10.120.100.4.1.1.8 | ScalarvplsNotificationMaxRate | read-write | current | This object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these not… |
| 1.3.6.1.4.1.171.10.120.100.4.1.2 | NodevplsConformance | |||
| 1.3.6.1.4.1.171.10.120.100.4.1.2.1 | NodevplsCompliances | |||
| 1.3.6.1.4.1.171.10.120.100.4.1.2.1.1 | CompliancevplsModuleFullCompliance | current | Compliance requirement for implementations that provide full support for VPLS-GENERIC-MIB. Such devices can then be monitored and configured using this MIB mod… | |
| 1.3.6.1.4.1.171.10.120.100.4.1.2.1.2 | CompliancevplsModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for VPLS-GENERIC-MIB. Such devices can then be monitored but cannot be configure… |
| 1.3.6.1.4.1.171.10.120.100.4.1.2.2 | NodevplsGroups | |||
| 1.3.6.1.4.1.171.10.120.100.4.1.2.2.1 | GroupvplsGroup | current | The group of objects supporting management of L2VPN VPLS services | |
| 1.3.6.1.4.1.171.10.120.100.4.1.2.2.2 | GroupvplsPwBindGroup | current | The group of objects supporting management of Pseudo Wire (PW) Binding to VPLS. | |
| 1.3.6.1.4.1.171.10.120.100.4.1.2.2.3 | GroupvplsNotificationGroup | current | The group of notifications supporting the Notifications generated for VPLS Services |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VplsBgpRouteDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher. For a complete definition of a route distinguisher, see [RFC4364]. For more details on use of a route distinguisher for a VPLS service, see [RFC4761] |
| VplsBgpRouteTarget | OCTET STRING(SIZE (0..256)) | current | Syntax for a route target. For a complete definition of a route target, see [RFC4364]. |
| VplsBgpRouteTargetType | INTEGER { import(1), export(2), both(3) } | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]. |