DGS3000-24TC-L2MGMT-MIB
490 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
| DLINK-ID-REC-MIB | AgentNotifyLevel |
| PORT-SECURITY-MIB | swPortSecPortIndex |
| Q-BRIDGE-MIB | --PortList |
| RFC1155-SMI | Counter |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| SWPRIMGMT-DGS3000-MIB | dgs3000-24-tcax |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.133.4.1.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information. | ||
| 1.3.6.1.4.1.171.11.133.4.1.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.2 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3 | TableswDevModuleInfoTable | not-accessible | current | This table contains the module information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1 | RowswDevModuleInfoEntry | not-accessible | current | A list of management information for each unit in the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1.1 | ColumnswDevModuleInfoUnitID | read-only | current | This object indicates the specific unit ID in the stacking/chassis table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1.3 | ColumnswDevModuleInfoModuleName | read-only | current | A text string containing the name of the module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1.4 | ColumnswDevModuleInfoReversion | read-only | current | A text string containing the version (name or number) of the module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1.5 | ColumnswDevModuleInfoSerial | read-only | current | A text string containing the serial number or serial name of the module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.3.1.6 | ColumnswDevModuleInfoDescription | read-only | current | A text string containing a description of the module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.1.4 | ScalarswDevInfoFrontPanelLedStatus | read-only | current | This object is a set of system LED indications. The first two octets indicate the LED PoE mode. 01 02 = PoE Mode 02 01 = Normal Mode 00 00 = Non-PoE Device The… |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.3 | ScalarswL2DevCtrlIGMPSnoopingMcstRTOnly | read-write | current | This object controls the IGMP snooping forward multicast routing only state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.4 | ScalarswL2DevCtrlRmonState | read-write | current | This object can enable or disable RMON. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.5 | ScalarswL2DevCtrlSnmpTrapState | read-write | current | This object controls the SNMP trap status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.6 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.7 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.8 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.9 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.10 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval, in seconds, that will trigger MAC notification messages. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.13 | ScalarswL2DevCtrlAsymVlanState | read-write | current | This object enables or disables asymmetric VLANs during the runtime of the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.14 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.14.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.14.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object designates TCP ports. When Telnet is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.16 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which previously created VLANs are included in the System IP Interface. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls the Web status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object designates TCP ports. When Web is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.18 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.19 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.20 | ScalarswL2DevCtrlIpAutoconfig | read-write | current | This object controls the IP auto configuration state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21 | NodeswL2DevCtrlCFM | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21.1 | ScalarswL2DevCtrlCFMState | read-write | current | This object indicates the CFM global state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21.2 | TableswL2DevCtrlCFMPortTable | not-accessible | current | A table containing the CFM state of specified ports. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21.2.1 | RowswL2DevCtrlCFMPortEntry | not-accessible | current | The entry of the CFM state on specified ports. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21.2.1.1 | ColumnswL2DevCtrlCFMPortIndex | not-accessible | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.21.2.1.2 | ColumnswL2DevCtrlCFMPortState | read-write | current | This object indicates the CFM state by port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.2.22 | ScalarswL2DevCtrlVLANTrunkState | read-write | current | This indicates the global state of the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent b… |
| 1.3.6.1.4.1.171.11.133.4.1.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device wh… |
| 1.3.6.1.4.1.171.11.133.4.1.2.2 | NodeswL2VLANMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.2.1 | TableswL2VlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.1.1 | RowswL2VlanStaticEntry | not-accessible | current | Static information for a VLAN configured into this device by (local or network) management. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.1.1.1 | ColumnswL2VlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.1.1.2 | ColumnswL2VLANAdvertisement | read-write | current | This object indicates if the advertisement is active or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.2 | ScalarswL2PVIDAutoAssignmentState | read-write | current | This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explic… |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.3 | TableswL2VlanPortInfoTable | not-accessible | current | A table containing the VLAN and port role information of each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.3.1 | RowswL2VlanPortInfoEntry | not-accessible | current | The table entry of VLAN port information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.3.1.1 | ColumnswL2VlanPortInfoPortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.3.1.2 | ColumnswL2VlanPortInfoVid | read-only | current | The VLAN ID assigned to a special port |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.3.1.3 | ColumnswL2VlanPortInfoPortRole | read-only | current | The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4 | TableswL2SubnetVLANTable | not-accessible | current | A table containing the subnet VLAN information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1 | RowswL2SubnetVLANEntry | not-accessible | current | The entry of subnet VLAN information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1.1 | ColumnswL2SubnetVLANIPAddress | read-only | current | This object indicates the IP address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1.2 | ColumnswL2SubnetVLANIPMask | read-only | current | This object indicates the IP mask. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1.3 | ColumnswL2SubnetVLANID | read-create | current | This object indicates the VLAN ID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1.4 | ColumnswL2SubnetVLANPriority | read-create | current | This object indicates the priority. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.4.1.5 | ColumnswL2SubnetVLANRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.5 | TableswL2VlanPrecedenceTable | not-accessible | current | A table containing the VLAN classification precedence information of each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.5.1 | RowswL2VlanPrecedenceEntry | not-accessible | current | The entry of VLAN classification precedence information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.5.1.1 | ColumnswL2VlanPrecedencePortIndex | read-only | current | This object indicates the port index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.5.1.2 | ColumnswL2VlanPrecedenceClassification | read-write | current | This object indicates the VLAN classification precedence. |
| 1.3.6.1.4.1.171.11.133.4.1.2.2.6 | ScalarswL2NniGvrpBpduAddress | read-write | current | Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.2 | ColumnswL2PortInfoMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.3 | ColumnswL2PortInfoUnitID | read-only | current | Indicates the ID of the unit in the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.4 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.5 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.6 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.7 | ColumnswL2PortInfoModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.1.1.8 | ColumnswL2PortInfoErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port on the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.2 | ColumnswL2PortCtrlMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.3 | ColumnswL2PortCtrlUnitIndex | read-only | current | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.4 | ColumnswL2PortCtrlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.5 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.6 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.7 | ColumnswL2PortCtrlLearningState | read-write | current | This object decides if the port is locked or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.8 | ColumnswL2PortCtrlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.10 | ColumnswL2PortCtrlMDIXState | read-write | current | This object configures the MDIX setting of the port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.11 | ColumnswL2PortCtrlAutoNegRestart | read-write | current | If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, … |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.2.1.12 | ColumnswL2PortCtrlAutoNegCapAdvertisedBits | read-write | current | A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configures the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.4 | ScalarswL2PortCtrlJumboFrameMaxSize | read-only | current | This object describes how many bytes the max jumbo frame is. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5 | TableswL2PortCableDiagnosisTable | not-accessible | current | A table that contains cable diagnostic information about every port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1 | RowswL2PortCableDiagnosisEntry | not-accessible | current | A list with cable diagnostic information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.1 | ColumnswL2PortCableDiagnosisPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.2 | ColumnswL2PortCableDiagnosisPairIndex | read-only | current | Indicates the pair index of each port. Pair 1 means pin 3 and 6 of the connector. Pair 2 means pin 1 and 2 of the connector. Pair 3 means pin 7 and 8 of the co… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.3 | ColumnswL2PortCableDiagnosisCableStatus | read-only | current | This object indicates the cable status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.4 | ColumnswL2PortCableDiagnosisPairStatus | read-only | current | This object indicates the status of the pair. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.5 | ColumnswL2PortCableDiagnosisPairLength | read-only | current | This object indicates the approx. length or length to failure of the pair. The unit value is in meters. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.5.1.6 | ColumnswL2PortCableDiagnosisPairLengthInaccuracy | read-only | current | This object indicates the inaccuracy of a pair length. The unit value is in meters. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.6 | TableswL2PortCounterCtrlTable | not-accessible | current | A table that is used to clear counter information about every port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.6.1 | RowswL2PortCounterCtrlEntry | not-accessible | current | A list of entries used to clear the counter information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.6.1.1 | ColumnswL2PortCounterCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.6.1.2 | ColumnswL2PortCounterClearCtrl | read-write | current | This object indicates whether to clear the counters for each port of the device or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7 | TableswL2PortErrTable | not-accessible | current | A table that contains error information for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7.1 | RowswL2PortErrEntry | not-accessible | current | A list of information regarding port errors on the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7.1.1 | ColumnswL2PortErrPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7.1.2 | ColumnswL2PortErrPortState | read-only | current | This object indicates if the port state is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7.1.3 | ColumnswL2PortErrPortConnStatus | read-only | current | This object indicates whether the Port Status is err-disabled or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.7.1.4 | ColumnswL2PortErrPortReason | read-only | current | This object describes the reason for the port error disabled type. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8 | TableswL2PortAutoNegInfoTable | not-accessible | current | A table that contains information about every port's auto negotiation status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1 | RowswL2PortAutoNegInfoEntry | not-accessible | current | A list of information for each port auto negotiation of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1.1 | ColumnswL2PortAutoNegInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1.2 | ColumnswL2PortAutoNegInfoAdminStatus | read-only | current | If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1.3 | ColumnswL2PortAutoNegInfoCapabilityBits | read-only | current | A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1.4 | ColumnswL2PortAutoNegInfoCapAdvertisedBits | read-only | current | A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.8.1.5 | ColumnswL2PortAutoNegInfoCapReceivedBits | read-only | current | A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be at… |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9 | TableswL2PortDropCounterTable | not-accessible | current | A table that contains information for each port drop counter. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1 | RowswL2PortDropCounterEntry | not-accessible | current | A list of information for each port auto negotiation of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1.1 | ColumnswL2PortDropCounterPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1.2 | ColumnswL2PortBufferFullDrops | read-only | current | The total number of packets discarded while buffer full. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1.3 | ColumnswL2PortACLDrops | read-only | current | The total number of packets denied by ACLs. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1.4 | ColumnswL2PortMulticastDrops | read-only | current | The total number of multicast packet that is discarded. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.9.1.5 | ColumnswL2PortVLANIngressDrops | read-only | current | The total number of packets discarded by VLAN ingress checking. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.10 | TableswL2PortJumboFrameCtrlTable | not-accessible | current | A table that contains information for each port's jumbo frame information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.10.1 | RowswL2PortJumboFrameCtrlEntry | not-accessible | current | A list of information for each port's jumbo frame of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.10.1.1 | ColumnswL2PortJumboFrameCtrlPortIndex | not-accessible | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.3.10.1.2 | ColumnswL2PortJumboFrameCtrlState | read-write | current | This object indicates the jumbo frame state on a specified port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4 | NodeswL2DiffServMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.4.1 | TableswL2DiffServTypeCtrlTable | not-accessible | current | A table that contains the Differentiated Service (DiffServ) type information of each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.1.1 | RowswL2DiffServTypeCtrlEntry | not-accessible | current | A list of DiffServ type information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.1.1.1 | ColumnswL2DiffServTypeCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.1.1.2 | ColumnswL2DiffServTypeCtrlDiffServType | read-write | current | The DiffServ type of this port. disabled (1) DSCP (2) the swL2DiffServDSCPCtrlTable will take effect upon replacement of the DSCP(DiffServ codepoint) field. To… |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.2 | TableswL2DiffServDSCPCtrlTable | not-accessible | current | A table that contains DSCP (Differentiated Service Code Point) control information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.2.1 | RowswL2DiffServDSCPCtrlEntry | not-accessible | current | A list of DSCP control information for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.2.1.1 | ColumnswL2DiffServDSCPCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.2.1.2 | ColumnswL2DiffServDSCPCtrlMode | read-write | current | The DSCP mode of this port. dscp-Force-Overwrite(1) value regardless of the DSCP of the incoming packet. dscp-Change-If-Zero(2) value if the DSCP of the incomi… |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.2.1.3 | ColumnswL2DiffServDSCPCtrlValue | read-write | current | The DSCP value of this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.3 | TableswL2DiffServTOSCtrlTable | not-accessible | current | A table that contains ToS (Type of Service) control information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.3.1 | RowswL2DiffServTOSCtrlEntry | not-accessible | current | A list of ToS control information for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.3.1.1 | ColumnswL2DiffServTOSCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.3.1.2 | ColumnswL2DiffServTOSCtrlMode | read-write | current | The ToS mode of this port. tos-Force-Overwrite(1) tos-TOS-Overwrite-802dot1p(2) tag control priority field to the value in the IP ToS precedence field. tos-802… |
| 1.3.6.1.4.1.171.11.133.4.1.2.4.3.1.3 | ColumnswL2DiffServTOSCtrlValue | read-write | current | This object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1) |
| 1.3.6.1.4.1.171.11.133.4.1.2.5 | NodeswL2LimitedMulticastMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.5.1 | TableswL2MulticastFilterProfileTable | not-accessible | current | A table that contains information about multicast filter profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.1.1 | RowswL2MulticastFilterProfileEntry | not-accessible | current | A list of information for each multicast filter profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.1.1.1 | ColumnswL2MulticastFilterProfileIndex | read-only | current | Indicates index for each profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.1.1.2 | ColumnswL2MulticastFilterProfileName | read-create | current | Specifies a profile name for each multicast filter profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.1.1.3 | ColumnswL2MulticastFilterStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2 | TableswL2MulticastFilterProfileAddressTable | not-accessible | current | A table that contains information about multicast filter address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2.1 | RowswL2MulticastFilterProfileAddressEntry | not-accessible | current | A list of information for each multicast filter address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2.1.1 | ColumnswL2MulticastFilterProfileIdIndex | read-only | current | Indicates index for each profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2.1.2 | ColumnswL2MulticastFilterFromIp | read-only | current | Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2.1.3 | ColumnswL2MulticastFilterToIp | read-only | current | Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.2.1.4 | ColumnswL2MulticastFilterAddressState | read-create | current | This object indicates the status of this entry. Setting value to createAndGo (4) will add the multicast address list specified in swL2MulticastFilterFromIp and… |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3 | TableswL2LimitedMulticastFilterPortTable | not-accessible | current | A table that is used to bind the port to the profile ID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3.1 | RowswL2LimitedMulticastFilterPortEntry | not-accessible | current | A list of information that is used to bind the port to the profile ID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3.1.1 | ColumnswL2LimitedMulticastFilterPortIndex | read-only | current | Specifies the port as an index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3.1.2 | ColumnswL2LimitedMulticastFilterPortAccess | read-write | current | This object indicates the access status for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3.1.3 | ColumnswL2LimitedMulticastFilterPortProfileID | read-write | current | This object specifies a profile ID list for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.3.1.4 | ColumnswL2LimitedMulticastFilterPortProfileStatus | read-create | current | Controls the multicast filter profile list which binds to each port. When set to add (2), the multicast filter profile ID list which is specified in swL2Limite… |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.4 | TableswL2MulticastFilterPortMaxGroupTable | not-accessible | current | A table that contains information about max group numbers based on each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.4.1 | RowswL2MulticastFilterPortMaxGroupEntry | not-accessible | current | A list of max group number information for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.4.1.1 | ColumnswL2MulticastFilterPortMaxGroupPortIndex | read-only | current | Specifies the port number as a table index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.4.1.2 | ColumnswL2MulticastFilterPortMaxGroup | read-write | current | Specifies maximum multicast filter group numbers for each port. The default value is 256. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5 | TableswL2LimitedMulticastFilterVIDTable | not-accessible | current | A table that is used to bind the VID to the profile ID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5.1 | RowswL2LimitedMulticastFilterVIDEntry | not-accessible | current | A list of information that is used to bind the VID to the profile ID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5.1.1 | ColumnswL2LimitedMulticastFilterVIDIndex | read-only | current | Specifies the VID as an index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5.1.2 | ColumnswL2LimitedMulticastFilterVIDAccess | read-write | current | This object indicates the access status for each VID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5.1.3 | ColumnswL2LimitedMulticastFilterVIDProfileID | read-write | current | This object specifies a profile ID list for each VID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.5.1.4 | ColumnswL2LimitedMulticastFilterVIDProfileStatus | read-create | current | Controls the multicast filter profile list which binds to each VID. When set to add (2), the multicast filter profile ID list which is specified in swL2Limited… |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.6 | TableswL2MulticastFilterVIDMaxGroupTable | not-accessible | current | A table that contains information about max group numbers based on VID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.6.1 | RowswL2MulticastFilterVIDMaxGroupEntry | not-accessible | current | A list of max group number information for each VID. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.6.1.1 | ColumnswL2MulticastFilterVIDMaxGroupVIDIndex | read-only | current | Specifies the VID number as a table index. |
| 1.3.6.1.4.1.171.11.133.4.1.2.5.6.1.2 | ColumnswL2MulticastFilterVIDMaxGroup | read-write | current | Specifies maximum multicast filter group numbers for each VID. The default value is 256. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6 | NodeswL2QOSMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1 | TableswL2QOSBandwidthControlTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1 | RowswL2QOSBandwidthControlEntry | not-accessible | current | A list of information contained in the swL2QOSBandwidthControlTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1.1 | ColumnswL2QOSBandwidthPortIndex | read-only | current | Indicates the port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1.2 | ColumnswL2QOSBandwidthRxRate | read-write | current | Indicates RX Rate (Mbit/sec) of the specified port. A value of 10000 means no limit. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1.3 | ColumnswL2QOSBandwidthTxRate | read-write | current | Indicates TX Rate(Mbit/sec) of the specified port. A value of 10000 means no limit. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1.4 | ColumnswL2QOSBandwidthRadiusRxRate | read-only | current | The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.1.1.5 | ColumnswL2QOSBandwidthRadiusTxRate | read-only | current | The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2 | TableswL2QOSSchedulingTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2.1 | RowswL2QOSSchedulingEntry | not-accessible | current | A list of information contained in the swL2QOSSchedulingTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2.1.1 | ColumnswL2QOSSchedulingClassIndex | read-only | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2.1.2 | ColumnswL2QOSSchedulingMaxPkts | read-write | current | Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its … |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2.1.3 | ColumnswL2QOSSchedulingMechanism | read-only | current | Indicates the mechanism of QoS scheduling. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.2.1.4 | ColumnswL2QOSSchedulingMaxLatency | read-write | current | Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin tr… |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.3 | TableswL2QOS8021pUserPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.3.1 | RowswL2QOS8021pUserPriorityEntry | not-accessible | current | A list of information contained in the swL2QOS8021pUserPriorityTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.3.1.1 | ColumnswL2QOS8021pUserPriorityIndex | read-only | current | The 802.1p user priority. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.3.1.2 | ColumnswL2QOS8021pUserPriorityClass | read-write | current | The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) … |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.4 | TableswL2QOS8021pDefaultPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.4.1 | RowswL2QOS8021pDefaultPriorityEntry | not-accessible | current | A list of information contained in the swL2QOS8021pDefaultPriorityTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.4.1.1 | ColumnswL2QOS8021pDefaultPriorityIndex | read-only | current | Indicates the port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.4.1.2 | ColumnswL2QOS8021pDefaultPriority | read-write | current | The priority value assigned to untagged packets received by the ports on the switch. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.4.1.3 | ColumnswL2QOS8021pRadiusPriority | read-only | current | Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.5 | ScalarswL2QOSSchedulingMechanismCtrl | read-write | current | This object controls the QoS scheduling mechanism. |
| 1.3.6.1.4.1.171.11.133.4.1.2.6.6 | ScalarswL2QOSHolPreventionCtrl | read-write | current | Controls QoS HoL Prevention |
| 1.3.6.1.4.1.171.11.133.4.1.2.7 | NodeswL2PortSecurityMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1 | TableswL2PortSecurityControlTable | not-accessible | current | A port security feature which controls the address learning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function… |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1 | RowswL2PortSecurityControlEntry | not-accessible | current | A list of information contained in the swL2PortSecurityControlTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1.1 | ColumnswL2PortSecurityPortIndex | read-only | current | Indicates the secured port to lock address learning. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1.2 | ColumnswL2PortSecurityMaxLernAddr | read-write | current | Indicates allowable number of addresses that can be learned on this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1.3 | ColumnswL2PortSecurityMode | read-write | current | Indicates the locking address mode. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the lo… |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1.4 | ColumnswL2PortSecurityAdmState | read-write | current | Indicates the administration state of the locking address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.1.1.5 | ColumnswL2PortSecurityEntryClearCtrl | read-write | current | Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.2 | NodeswL2PortSecurityDelCtrl | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.7.2.1 | ScalarswL2PortSecurityDelVlanName | read-write | current | Indicates VLAN name. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.2.2 | ScalarswL2PortSecurityDelPort | read-write | current | Indicates the port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.2.3 | ScalarswL2PortSecurityDelMacAddress | read-write | current | Specifies a MAC address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.2.4 | ScalarswL2PortSecurityDelActivity | read-write | current | . |
| 1.3.6.1.4.1.171.11.133.4.1.2.7.3 | ScalarswL2PortSecurityTrapLogState | read-write | current | When enabled (2), whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant informa… |
| 1.3.6.1.4.1.171.11.133.4.1.2.8 | NodeswL2DhcpRelayMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.8.1 | ScalarswL2DhcpRelayState | read-write | current | This object indicates if the DHCP relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.2 | ScalarswL2DhcpRelayHopCount | read-write | current | This object indicates the maximum number of router hops that DHCP packets can cross. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.3 | ScalarswL2DhcpRelayTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP … |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.4 | ScalarswL2DhcpRelayOption82State | read-write | current | This object indicates if the DHCP relay agent information option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.5 | ScalarswL2DhcpRelayOption82Check | read-write | current | This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.6 | ScalarswL2DhcpRelayOption82Policy | read-write | current | This object indicates the reforwarding policy of the DHCP relay agent information option 82. replace (1) - replace the exiting option 82 field in messages. dro… |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.7 | TableswL2DhcpRelayCtrlTable | not-accessible | current | This table specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.7.1 | RowswL2DhcpRelayCtrlEntry | not-accessible | current | A list of information that specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.7.1.1 | ColumnswL2DhcpRelayCtrlInterfaceName | read-only | current | The name of the IP interface. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.7.1.2 | ColumnswL2DhcpRelayCtrlServer | read-only | current | The DHCP server IP address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.8.7.1.3 | ColumnswL2DhcpRelayCtrlState | read-write | current | This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from … |
| 1.3.6.1.4.1.171.11.133.4.1.2.9 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.9.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies information about the logical port trunk groups. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information about each logical port trunk group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.2 | ColumnswL2TrunkName | read-create | current | The name of the logical port trunk group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the ma… |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for … |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.5 | TableswL2TrunkLACPPortTable | not-accessible | current | This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.5.1 | RowswL2TrunkLACPPortEntry | not-accessible | current | A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.5.1.1 | ColumnswL2TrunkLACPPortIndex | read-only | current | The index of logical port LACP. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.5.1.2 | ColumnswL2TrunkLACPPortState | read-write | current | The state of a logical port LACP. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.6 | TableswL2TrunkVLANTable | not-accessible | current | This table is used to manage the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.6.1 | RowswL2TrunkVLANEntry | not-accessible | current | This object is used to configure the VLAN trunking settings for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.6.1.1 | ColumnswL2TrunkVLANPort | read-only | current | This object indicates the port being configured. |
| 1.3.6.1.4.1.171.11.133.4.1.2.9.6.1.2 | ColumnswL2TrunkVLANState | read-write | current | The state of the logical port LACP. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.10.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the seq… |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the port where ingress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the port where egress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from … |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5 | TableswL2MirrorGroupTable | not-accessible | current | This table specifies information about the mirror group configuration. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1 | RowswL2MirrorGroupEntry | not-accessible | current | A list of information about each mirror group configuration. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.1 | ColumnswL2MirrorGroupID | not-accessible | current | This object indicates the mirror group. The range of this object is (1..N), the value of N is project dependent. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.2 | ColumnswL2MirrorGroupRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.3 | ColumnswL2MirrorGroupState | read-create | current | This object indicates the mirror group state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.4 | ColumnswL2MirrorGroupTargetPort | read-create | current | This object indicates the mirror group target port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.5 | ColumnswL2MirrorGroupSourceIngress | read-create | current | This object indicates the mirror group ingress source ports. |
| 1.3.6.1.4.1.171.11.133.4.1.2.10.5.1.6 | ColumnswL2MirrorGroupSourceEngress | read-create | current | This object indicates the mirror group engress source ports. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.11.1 | ScalarswL2IGMPMaxSupportedVlans | read-only | current | Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable). |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.2 | ScalarswL2IGMPMaxIpGroupNumPerVlan | read-only | current | Maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.3 | ScalarswL2IGMPSnoopingMulticastVlanState | read-write | current | It indicates the global state of igmp_snoop multicast_vlan. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4 | TableswL2IGMPCtrlTable | not-accessible | current | The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1 | RowswL2IGMPCtrlEntry | not-accessible | current | The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.1 | ColumnswL2IGMPCtrlVid | read-only | current | This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is … |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.2 | ColumnswL2IGMPQueryInterval | read-write | current | The frequency at which IGMP Host-Query packets are transmitted on this switch. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.3 | ColumnswL2IGMPMaxResponseTime | read-write | current | The maximum query response time on this switch. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.4 | ColumnswL2IGMPRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high packet loss, the Robustness Variable may… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.5 | ColumnswL2IGMPLastMemberQueryInterval | read-write | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.6 | ColumnswL2IGMPHostTimeout | read-write | obsolete | The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.7 | ColumnswL2IGMPRouteTimeout | read-write | obsolete | The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.8 | ColumnswL2IGMPLeaveTimer | read-write | obsolete | When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveT… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.9 | ColumnswL2IGMPQueryState | read-write | current | This object decides if the IGMP query is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.10 | ColumnswL2IGMPCurrentState | read-only | current | This object indicates the current IGMP query state. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.11 | ColumnswL2IGMPCtrlState | read-write | current | This object indicates the status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are different from … |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.12 | ColumnswL2IGMPFastLeaveState | read-write | current | This object indicates the fast_leave status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are diff… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.13 | ColumnswL2IGMPQueryVersion | read-write | current | Configure the IGMP version of query packet which will be sent by the router. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.14 | ColumnswL2IGMPRateLimit | read-write | current | Config the rate of IGMP report or leave packet that the switch can process on a specific VLAN. The rate is specified in packet per second. The packet that exce… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.4.1.15 | ColumnswL2IGMPReportSuppression | read-write | current | When enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5 | TableswL2IGMPQueryInfoTable | not-accessible | current | This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1 | RowswL2IGMPQueryInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1.1 | ColumnswL2IGMPInfoVid | read-only | current | This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTa… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1.2 | ColumnswL2IGMPInfoQueryCount | read-only | obsolete | This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1.3 | ColumnswL2IGMPInfoTxQueryCount | read-only | obsolete | This object indicates the send count of IGMP query messages, on a per-VLAN basis. In the case of an IGMP timer expiration, the switch will send IGMP query pack… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1.4 | ColumnswL2IGMPQueryIPAddress | read-only | current | This object identifies the Query IP addresses. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.5.1.5 | ColumnswL2IGMPQueryExpiryTime | read-only | current | This object indicates the Query Expiry Time. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6 | TableswL2IGMPInfoTable | not-accessible | obsolete | The table containing current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of the associa… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1 | RowswL2IGMPInfoEntry | not-accessible | obsolete | Information about current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and the swL2IGMPCtrlState of associated… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.1 | ColumnswL2IGMPVid | read-only | obsolete | This object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.2 | ColumnswL2IGMPGroupIpAddr | read-only | obsolete | This object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.3 | ColumnswL2IGMPMacAddr | read-only | obsolete | This object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.4 | ColumnswL2IGMPPortMap | read-only | obsolete | This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a por… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.5 | ColumnswL2IGMPIpGroupReportCount | read-only | obsolete | This object indicates how many report packets were received by the device, that correspond with this entry when the IGMP function is enabled on a per-VLAN basi… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.6 | ColumnswL2IGMPVersion | read-only | obsolete | This object identifies the version of IGMP from IGMP packets, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.6.1.7 | ColumnswL2IGMPGroupMode | read-only | obsolete | When the version of IGMP is v3, this object identifies whether the group is in INCLUDE or EXCLUDE mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7 | TableswL2IGMPRouterPortTable | not-accessible | current | The information of the router port table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1 | RowswL2IGMPRouterPortEntry | not-accessible | current | The entry of swL2IGMPRouterPortTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1.1 | ColumnswL2IGMPRouterPortVlanid | read-only | current | This object indicates the VLAN ID of the router's port entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1.2 | ColumnswL2IGMPRouterPortVlanName | read-only | current | This object indicates the VLAN name of the router's port entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1.3 | ColumnswL2IGMPRouterPortStaticPortList | read-write | current | This object indicates the static portlist of the router's port entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1.4 | ColumnswL2IGMPRouterPortDynamicPortList | read-only | current | This object indicates the dynamic portlist of the router's port entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.7.1.5 | ColumnswL2IGMPRouterPortForbiddenPortList | read-write | current | This object indicates the forbidden portlist of the router's port entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8 | TableswL2IGMPMulticastVlanTable | not-accessible | current | Information about the IGMP snooping multicast VLAN table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1 | RowswL2IGMPMulticastVlanEntry | not-accessible | current | The entry of swL2IGMPMulticastVlanTable. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.1 | ColumnswL2IGMPMulticastVlanid | read-only | current | This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.2 | ColumnswL2IGMPMulticastVlanName | read-create | current | This object indicates the VLAN name of the IGMP snooping multicast VLAN entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.3 | ColumnswL2IGMPMulticastVlanSourcePort | read-write | current | This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and th… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.4 | ColumnswL2IGMPMulticastVlanMemberPort | read-write | current | This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry a… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.5 | ColumnswL2IGMPMulticastVlanTagMemberPort | read-write | current | This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.6 | ColumnswL2IGMPMulticastVlanState | read-write | current | This object can be used to enable or disable the IGMP snooping multicast VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.7 | ColumnswL2IGMPMulticastVlanReplaceSourceIp | read-write | current | The replacement source IP of this multicast VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.8 | ColumnswL2IGMPMulticastVlanRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.9 | ColumnswL2IGMPMulticastVlanRemoveAllMcastAddrListAction | read-write | current | This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.10 | ColumnswL2IGMPMulticastVlanUntagSourcePort | read-write | current | This object indicates the untagged member ports to add to the multicast VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.11 | ColumnswL2IGMPMulticastVlanRemapPriority | read-create | current | The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.8.1.12 | ColumnswL2IGMPMulticastVlanReplacePriority | read-create | current | Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9 | TableswL2IGMPMulticastVlanGroupTable | not-accessible | current | The table containing the IGMP snooping multicast VLAN group information |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9.1 | RowswL2IGMPMulticastVlanGroupEntry | not-accessible | current | Information about the current IGMP snooping multicast VLAN group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9.1.1 | ColumnswL2IGMPMulticastVlanGroupVid | read-only | current | This object indicates the VID of the IGMP snooping multicast VLAN group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9.1.2 | ColumnswL2IGMPMulticastVlanGroupFromIp | read-only | current | Specifies the multicast address list for this VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9.1.3 | ColumnswL2IGMPMulticastVlanGroupToIp | read-only | current | Specifies the multicast address list for this VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.9.1.4 | ColumnswL2IGMPMulticastVlanGroupStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.10 | TableswL2IGMPv3Table | not-accessible | current | This table contains the IGMP snooping V3 information. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.10.1 | RowswL2IGMPv3Entry | not-accessible | current | Information about the current IGMP snooping V3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.10.1.1 | ColumnswL2IGMPv3SourceIPAddr | read-only | current | This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.10.1.2 | ColumnswL2IGMPv3Forwarding | read-only | current | This object identifies if the packets from the source IP addresses are forwarding or not. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.10.1.3 | ColumnswL2IGMPv3ExpireTimer | read-only | current | This object identifies the leaving times of the source time. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11 | TableswIGMPSnoopingGroupTable | not-accessible | current | The table contains the current IGMP snooping group information captured by the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1 | RowswIGMPSnoopingGroupEntry | not-accessible | current | Information about the current IGMP snooping group information which has been captured by the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.1 | ColumnswIGMPSnoopingGroupVid | read-only | current | This object indicates the VID of the individual IGMP snooping group table entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.2 | ColumnswIGMPSnoopingGroupGroupAddr | read-only | current | This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.3 | ColumnswIGMPSnoopingGroupSourceAddr | read-only | current | This object identifies the source addresses. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.4 | ColumnswIGMPSnoopingGroupIncludePortMap | read-only | current | This object indicates the port list under INCLUDE mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.5 | ColumnswIGMPSnoopingGroupExcludePortMap | read-only | current | This object indicates the port list under EXCLUDE mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.6 | ColumnswIGMPSnoopingGroupReportCount | read-only | current | This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basi… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.7 | ColumnswIGMPSnoopingGroupUpTime | read-only | current | This object indicates how long since the group was detected. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.8 | ColumnswIGMPSnoopingGroupExpiryTime | read-only | current | This object indicates the time left before this group will be aged out. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.9 | ColumnswIGMPSnoopingGroupRouterPorts | read-only | current | This object indicates the port number of the router ports. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.11.1.10 | ColumnswIGMPSnoopingGroupStaticMemberPorts | read-only | current | This object indicates the port number of the static member ports. This object is only supported by IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12 | NodeswL2IGMPDynIpMultMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.1 | ScalarswL2IGMPDynIPMultMaxEntry | read-write | current | This object specifies the maximum number of entries which can be learned by dynamic IP multicast |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.2 | NodeswL2IGMPSnoopingClearDynIpMult | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.2.1 | ScalarswL2IGMPSnoopingClearDynIpMultVID | read-write | current | This object indicates the VLAN identifier where the data driven entries will be removed from. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.2.2 | ScalarswL2IGMPSnoopingClearDynIpMultIP | read-write | current | This object indicates the IP address of the IGMP snooping group from which the data driven entries will be removed. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.2.3 | ScalarswL2IGMPSnoopingClearDynIpMultAction | read-write | current | Setting this object will clear the data driven entries. all - remove all learned data driven groups vlan - clear all data driven entries in the VLAN specified … |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.3 | TableswL2IGMPDynIPMultCtrlTable | not-accessible | current | This table is used to manage the IGMP dynamic IP multicast. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.3.1 | RowswL2IGMPDynIPMultCtrlEntry | not-accessible | current | A list of manageable entities for IGMP dynamic IP multicast. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.3.1.1 | ColumnswL2IGMPDynIPMultVlanState | read-write | current | This object is used to disable or enable the dynamic IP multicast feature in this VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.3.1.2 | ColumnswL2IGMPDynIPMultVlanAge | read-write | current | This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.12.3.1.3 | ColumnswL2IGMPDynIPMultGroupExpiryTime | read-write | current | This object indicates the dynamic IP multicast Group Expiry Time. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.13 | TableswL2IGMPAccessAuthTable | not-accessible | current | This table is used to manage the IGMP Access Authentication configurations of the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.13.1 | RowswL2IGMPAccessAuthEntry | not-accessible | current | A list of manageable entities for IGMP Access Authentication. The configuration is done per port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.13.1.1 | ColumnswL2IGMPAccessAuthPort | read-only | current | The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.13.1.2 | ColumnswL2IGMPAccessAuthState | read-write | current | This object denotes the status of IGMP Access Authentication of the port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14 | NodeswL2IGMPCountrInfoMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.1 | ScalarswL2IGMPSnoopingClearStatisticsCounter | read-write | current | This object is used to clear the IGMP snooping statistics counter. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2 | TableswL2IGMPVlanCounterInfoTable | not-accessible | current | This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device, based on … |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1 | RowswL2IGMPVlanCounterInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.1 | ColumnswL2IGMPVlanCounterInfoVid | read-only | current | This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCt… |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.2 | ColumnswL2IGMPVlanCounterGroupNumber | read-only | current | The group number on a per VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.3 | ColumnswL2IGMPVlanQueryCountV1 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.4 | ColumnswL2IGMPVlanQueryCountV2 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.5 | ColumnswL2IGMPVlanQueryCountV3 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.6 | ColumnswL2IGMPVlanDropQueryCount | read-only | current | This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.7 | ColumnswL2IGMPVlanReportCountV1 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.8 | ColumnswL2IGMPVlanReportCountV2 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.9 | ColumnswL2IGMPVlanReportCountV3 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.10 | ColumnswL2IGMPVlanLeaveCountV2 | read-only | current | This object indicates the number of leave packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.11 | ColumnswL2IGMPVlanDropedReportAndLeaveCount | read-only | current | This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.12 | ColumnswL2IGMPVlanDroppedByMaxGroupLimitation | read-only | current | This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.13 | ColumnswL2IGMPVlanDroppedByGroupFilter | read-only | current | This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.14 | ColumnswL2IGMPVlanTxQueryCountV1 | read-only | current | This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.15 | ColumnswL2IGMPVlanTxQueryCountV2 | read-only | current | This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.16 | ColumnswL2IGMPVlanTxQueryCountV3 | read-only | current | This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.17 | ColumnswL2IGMPVlanTxReportCountV1 | read-only | current | This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.18 | ColumnswL2IGMPVlanTxReportCountV2 | read-only | current | This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.19 | ColumnswL2IGMPVlanTxReportCountV3 | read-only | current | This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.2.1.20 | ColumnswL2IGMPVlanTxLeaveCountV2 | read-only | current | This object indicates the send count of IGMP leave messages, on a per-VLAN basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3 | TableswL2IGMPPortCounterInfoTable | not-accessible | current | This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device, based on … |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1 | RowswL2IGMPPortCounterInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.1 | ColumnswL2IGMPPortCounterInfoIndex | read-only | current | This object indicates the port number of the associated IGMP Counter info table entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.2 | ColumnswL2IGMPPortCounterGroupNumber | read-only | current | Group number per port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.3 | ColumnswL2IGMPPortQueryCountV1 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.4 | ColumnswL2IGMPPortQueryCountV2 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.5 | ColumnswL2IGMPPortQueryCountV3 | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.6 | ColumnswL2IGMPPortDropQueryCount | read-only | current | This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-port basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.7 | ColumnswL2IGMPPortReportCountV1 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.8 | ColumnswL2IGMPPortReportCountV2 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.9 | ColumnswL2IGMPPortReportCountV3 | read-only | current | This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.10 | ColumnswL2IGMPPortLeaveCountV2 | read-only | current | This object indicates the number of leave packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.11 | ColumnswL2IGMPPortDropedReportAndLeaveCount | read-only | current | This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-port basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.12 | ColumnswL2IGMPPortDroppedByMaxGroupLimitation | read-only | current | This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-port basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.13 | ColumnswL2IGMPPortDroppedByGroupFilter | read-only | current | This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-port basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.14 | ColumnswL2IGMPPortTxQueryCountV1 | read-only | current | This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.15 | ColumnswL2IGMPPortTxQueryCountV2 | read-only | current | This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.16 | ColumnswL2IGMPPortTxQueryCountV3 | read-only | current | This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.17 | ColumnswL2IGMPPortTxReportCountV1 | read-only | current | This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv1. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.18 | ColumnswL2IGMPPortTxReportCountV2 | read-only | current | This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.19 | ColumnswL2IGMPPortTxReportCountV3 | read-only | current | This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv3. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.14.3.1.20 | ColumnswL2IGMPPortTxLeaveCountV2 | read-only | current | This object indicates the send count of IGMP leave messages, on a per-port basis, for IGMPv2. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.15 | TableswL2IGMPRouterIPAddressTable | not-accessible | current | This table indicates the router IP address of the associated IGMP Router Port Table (swL2IGMPRouterPortTable). |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.15.1 | RowswL2IGMPRouterIPAddressEntry | not-accessible | current | Information about current router IP address in the IGMP Router Port Table (swL2IGMPRouterPortTable). |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.15.1.1 | ColumnswL2IGMPRouterIPAddressVid | read-only | current | This object indicates the VID of the associated IGMP Router Port Table (swL2IGMPRouterPortTable). |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.15.1.2 | ColumnswL2IGMPRouterIPAddress | read-only | current | This object indicates the Router IP address of the associated IGMP Router Port Table. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16 | TableswL2IGMPSnoopingStaticGroupTable | not-accessible | current | The table contains the current IGMP snooping static group information captured by the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16.1 | RowswL2IGMPSnoopingStaticGroupEntry | not-accessible | current | Information about current IGMP snooping static group information captured by the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16.1.1 | ColumnswL2IGMPSnoopingStaticGroupVID | read-only | current | This object indicates the VID of the current IGMP snooping static group. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16.1.2 | ColumnswL2IGMPSnoopingStaticGroupIPaddress | read-only | current | This object indicates the current IGMP snooping static group IP address. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16.1.3 | ColumnswL2IGMPSnoopingStaticGroupMemberPortList | read-write | current | This object indicates the current IGMP snooping static group Member Portlist. |
| 1.3.6.1.4.1.171.11.133.4.1.2.11.16.1.4 | ColumnswL2IGMPSnoopingStaticGroupRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13 | NodeswL2TrafficMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1 | TableswL2TrafficCtrlTable | not-accessible | current | This table specifies the storm traffic control configuration. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1 | RowswL2TrafficCtrlEntry | not-accessible | current | A list of information specific to the storm traffic control configuration. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.1 | ColumnswL2TrafficCtrlGroupIndex | read-only | current | The index of the logical port trunk. The trunk group number depends on the existence of a unit and module. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.2 | ColumnswL2TrafficCtrlUnitIndex | read-only | current | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.3 | ColumnswL2TrafficCtrlBMStromthreshold | read-write | current | This object decides how many thousand broadcast/multicast packets per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2… |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.4 | ColumnswL2TrafficCtrlBcastStromCtrl | read-write | current | This object indicates if the broadcast storm control function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.5 | ColumnswL2TrafficCtrlMcastStromCtrl | read-write | current | This object indicates if the multicast storm control function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.13.1.1.6 | ColumnswL2TrafficCtrlDlfStromCtrl | read-write | current | This object indicates if the destination lookup fail function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.4.1.2.14 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.14.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.133.4.1.2.14.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information which specifies the port with its traffic forwarding list. |
| 1.3.6.1.4.1.171.11.133.4.1.2.14.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.14.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list where a specific port can forward traffic. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15 | NodeswL2StpMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.15.1 | ScalarswL2StpForwardBPDU | read-write | current | Indicates whether or not to flood BPDU packets when STP is disabled on the device. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.2 | ScalarswL2StpLbd | read-write | current | Indicates whether STP loopback prevention on the device is turned on. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.3 | ScalarswL2StpLbdRecoverTime | read-write | current | The time period set between the checking intervals of the BPDU loop. Configuring this time as 0 disables loopback checking. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4 | TableswL2StpPortTable | not-accessible | current | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1 | RowswL2StpPortEntry | not-accessible | current | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.1 | ColumnswL2StpPort | read-only | current | The port number of the port for this entry. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.2 | ColumnswL2StpPortLbd | read-write | current | Used to enable or disable the loopback function on the specified port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.3 | ColumnswL2StpPortStatus | read-only | current | When the port is enabled, this defines the port's current state as defined by the Spanning Tree Protocol. If PortEnable is disabled, the port status will be no… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.4 | ColumnswL2StpPortRole | read-only | current | When the port is enabled, this defines the port's current port role as defined by the Spanning Tree Protocol. If the PortEnable is disabled, the port status wi… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.5 | ColumnswL2StpPortFBPDU | read-write | current | The enable/disable status of the BPDU filtering mechanism as related to this port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.6 | ColumnswL2StpPortLinkState | read-only | current | This object indicates the STP port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.7 | ColumnswL2StpPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing TRUE (1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no eff… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.8 | ColumnswL2StpPortAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE (1) indicates that this port should be assumed as an edge-port and a value of FALSE (2) in… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.9 | ColumnswL2StpPortOperEdgePort | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of swL2StpPortAdminEdgePort and is set to FALSE on reception of a BPDU… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.10 | ColumnswL2StpPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue (0) indicates that this port should always be treated a… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.11 | ColumnswL2StpPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.12 | ColumnswL2StpPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns … |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.13 | ColumnswL2StpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.171.11.133.4.1.2.15.4.1.14 | ColumnswL2STPPortState | read-write | current | Used to describe the enable/disable state of the loopback prevention function on a per-port basis. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17 | NodeswL2MulticastFilterMode | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.17.1 | TableswL2MulticastFilterModeVlanTable | not-accessible | current | A table that contains information about the VLAN multicast filter mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.1.1 | RowswL2MulticastFilterModeVlanEntry | not-accessible | current | A list of multicast filter mode information for each VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.1.1.1 | ColumnswL2MulticastFilterVid | read-only | current | Indicates the VID for each VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.1.1.2 | ColumnswL2MulticastFilterVlanMode | read-write | current | Specifies the multicast filter mode for each VLAN. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.2 | TableswL2MulticastFilterModePortTable | not-accessible | current | A table that contains information about the port multicast filter mode. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.2.1 | RowswL2MulticastFilterModePortEntry | not-accessible | current | A list of multicast filter mode information for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.2.1.1 | ColumnswL2MulticastFilterPortIndex | read-only | current | Specifies the port number. |
| 1.3.6.1.4.1.171.11.133.4.1.2.17.2.1.2 | ColumnswL2MulticastFilterPortMode | read-write | current | Specifies multicast filter mode for each port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18 | NodeswL2LoopDetectMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1 | NodeswL2LoopDetectCtrl | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1.1 | ScalarswL2LoopDetectAdminState | read-write | current | This object indicates the loopback detection status for the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1.2 | ScalarswL2LoopDetectInterval | read-write | current | This object indicates the interval value, the range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1.3 | ScalarswL2LoopDetectRecoverTime | read-write | current | This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1.4 | ScalarswL2LoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.1.5 | ScalarswL2LoopDetectTrapMode | read-write | current | This object indicates the loopback detection trap mode for the system. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2 | NodeswL2LoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1 | TableswL2LoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1.1 | RowswL2LoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1.1.1 | ColumnswL2LoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1.1.2 | ColumnswL2LoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1.1.3 | ColumnswL2LoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.11.133.4.1.2.18.2.1.1.4 | ColumnswL2LoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.11.133.4.1.2.100 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1 | NodeswL2Notify | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.1 | NodeswL2NotifyMgmt | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.1.1 | ScalarswL2macNotificationSeverity | read-write | current | Indicates the level of macNotification detection. |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.1.2 | ScalarswL2PortSecurityViolationSeverity | read-write | current | Indicates the level of PortSecurityViolation detection. |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2 | NodeswL2NotifyPrefix | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0 | NodeswL2NotifFirmware | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.1 | NotificationswL2macNotification | current | This trap indicates the MAC address variations in the address table . | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out. | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.3 | NotificationswL2PortLoopOccurred | current | The trap is sent when a Port loop occurs. | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.4 | NotificationswL2PortLoopRestart | current | The trap is sent when a Port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.5 | NotificationswL2VlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.0.6 | NotificationswL2VlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates information about the last time the system rebooted. |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.1.2 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violated the port security configuration. |
| 1.3.6.1.4.1.171.11.133.4.1.2.100.1.2.1.3 | ScalarswL2VlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that detected a loopback. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IANAifMauAutoNegCapBits | BITS{ bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15) } | current | This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable. |