DGS3200-L2MGMT-MIB
272 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
| DLINK-ID-REC-MIB | AgentNotifyLevel |
| Q-BRIDGE-MIB | --PortList |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| SW3200PRIMGMT-MIB | dgs3200 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.101.1.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information. | ||
| 1.3.6.1.4.1.171.11.101.1.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.101.1.2.1.1.2 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.101.1.2.1.1.4 | ScalarswDevInfoFrontPanelLedStatus | read-only | current | This object is a set of system LED indications. The first four octets are defined as system LED. The first two octets are currently unused and must be set to z… |
| 1.3.6.1.4.1.171.11.101.1.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.4 | ScalarswL2DevCtrlRmonState | read-write | current | This object can enable or disable RMON. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.5 | ScalarswL2DevCtrlSnmpTrapState | read-write | current | This object controls the SNMP trap status. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.6 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | When the object is set to active, all statistical counters will be cleared. If set to normal, no action. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.7 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.8 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.9 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 . |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.10 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval, in seconds, which will trigger MAC notification messages. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.14 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.2.14.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.14.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object designates TCP ports. When Telnet is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.16 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which previously created VLANs are included in the System IP Interface. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls the Web status. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object designates TCP ports. When Web is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.18 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.19 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.20 | ScalarswL2DevCtrlIpAutoconfig | read-write | current | This object controls the IP auto configuration state. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21 | NodeswL2DevCtrlCFM | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21.1 | ScalarswL2DevCtrlCFMState | read-write | current | This object indicates the CFM global state. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21.2 | TableswL2DevCtrlCFMPortTable | not-accessible | current | A table containing the CFM state of specified ports. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21.2.1 | RowswL2DevCtrlCFMPortEntry | not-accessible | current | The entry of the CFM state on specified ports. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21.2.1.1 | ColumnswL2DevCtrlCFMPortIndex | not-accessible | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.21.2.1.2 | ColumnswL2DevCtrlCFMPortState | read-write | current | This object indicates the CFM state by port. |
| 1.3.6.1.4.1.171.11.101.1.2.1.2.22 | ScalarswL2DevCtrlVLANTrunkState | read-write | current | This indicates the global state of the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.101.1.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.101.1.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by … |
| 1.3.6.1.4.1.171.11.101.1.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device… |
| 1.3.6.1.4.1.171.11.101.1.2.2 | NodeswL2VLANMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.2.1 | TableswL2VlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.11.101.1.2.2.1.1 | RowswL2VlanStaticEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.171.11.101.1.2.2.1.1.1 | ColumnswL2VlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.2.1.1.2 | ColumnswL2VLANAdvertisement | read-write | current | This object indicates if the advertisement is active or not. |
| 1.3.6.1.4.1.171.11.101.1.2.2.2 | ScalarswL2PVIDAutoAssignmentState | read-write | current | This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID only be changed by PVID configuration (user changes explicitly). Th… |
| 1.3.6.1.4.1.171.11.101.1.2.2.3 | TableswL2VlanPortInfoTable | not-accessible | current | A table containing vlan and port role information of each port. |
| 1.3.6.1.4.1.171.11.101.1.2.2.3.1 | RowswL2VlanPortInfoEntry | not-accessible | current | The table entry of vlan port information. |
| 1.3.6.1.4.1.171.11.101.1.2.2.3.1.1 | ColumnswL2VlanPortInfoPortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.171.11.101.1.2.2.3.1.2 | ColumnswL2VlanPortInfoVid | read-only | current | The VLAN-ID assigned to a special port |
| 1.3.6.1.4.1.171.11.101.1.2.2.3.1.3 | ColumnswL2VlanPortInfoPortRole | read-only | current | The port role of a special port.when none,it means this port is not belong to the vlan. |
| 1.3.6.1.4.1.171.11.101.1.2.3 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.3.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.2 | ColumnswL2PortInfoMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.3 | ColumnswL2PortInfoUnitID | read-only | current | Indicates ID of the unit in the system |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.4 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.5 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.6 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.101.1.2.3.1.1.8 | ColumnswL2PortInfoErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.2 | ColumnswL2PortCtrlMediumType | read-only | current | Indicates medium type of the port number. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.3 | ColumnswL2PortCtrlUnitIndex | read-only | current | Indicates ID of the unit in the device |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.4 | ColumnswL2PortCtrlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.5 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.6 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.7 | ColumnswL2PortCtrlLearningState | read-write | current | This object decides if the port is locked or not. |
| 1.3.6.1.4.1.171.11.101.1.2.3.2.1.8 | ColumnswL2PortCtrlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.101.1.2.3.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configures the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.101.1.2.3.4 | ScalarswL2PortCtrlJumboFrameMaxSize | read-only | current | This object describes how many bytes the max jumbo frame is. |
| 1.3.6.1.4.1.171.11.101.1.2.3.6 | TableswL2PortCounterCtrlTable | not-accessible | current | A table that used to clear counter information about every port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.6.1 | RowswL2PortCounterCtrlEntry | not-accessible | current | A list of entry used to clear counter information for each port of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.3.6.1.1 | ColumnswL2PortCounterCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.101.1.2.3.6.1.2 | ColumnswL2PortCounterClearCtrl | read-write | current | This object indicates if to clear the counters for each port of the device or not. |
| 1.3.6.1.4.1.171.11.101.1.2.3.7 | TableswL2PortErrTable | not-accessible | current | A table that contains error information for each port. |
| 1.3.6.1.4.1.171.11.101.1.2.3.7.1 | RowswL2PortErrEntry | not-accessible | current | A list of information regarding port errors on the device. |
| 1.3.6.1.4.1.171.11.101.1.2.3.7.1.1 | ColumnswL2PortErrPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.101.1.2.3.7.1.2 | ColumnswL2PortErrPortState | read-only | current | This object indicates the port state is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.3.7.1.3 | ColumnswL2PortErrPortConnStatus | read-only | current | This object indicates whether the PortStatus is err-disabled or not. |
| 1.3.6.1.4.1.171.11.101.1.2.3.7.1.4 | ColumnswL2PortErrPortReason | read-only | current | This object describes if the reason for the port error is STP LBD or Storm control. |
| 1.3.6.1.4.1.171.11.101.1.2.5 | NodeswL2LimitedMulticastMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.5.1 | TableswL2MulticastFilterProfileTable | not-accessible | current | A table that contains information about multicast filter address. |
| 1.3.6.1.4.1.171.11.101.1.2.5.1.1 | RowswL2MulticastFilterProfileEntry | not-accessible | current | A list of multicast filter address information for each profile ID. |
| 1.3.6.1.4.1.171.11.101.1.2.5.1.1.1 | ColumnswL2MulticastFilterProfileIndex | read-only | current | Indicates index for each profile. |
| 1.3.6.1.4.1.171.11.101.1.2.5.1.1.2 | ColumnswL2MulticastFilterProfileName | read-create | current | Specifies a profile name for each multicast filter profile. |
| 1.3.6.1.4.1.171.11.101.1.2.5.1.1.3 | ColumnswL2MulticastFilterStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2 | TableswL2MulticastFilterProfileAddressTable | not-accessible | current | A table that contains information about multicast filter address. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2.1 | RowswL2MulticastFilterProfileAddressEntry | not-accessible | current | A list of multicast filter address information for each profile ID. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2.1.1 | ColumnswL2MulticastFilterProfileIdIndex | read-only | current | Indicates index for each profile. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2.1.2 | ColumnswL2MulticastFilterFromIp | read-only | current | Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2.1.3 | ColumnswL2MulticastFilterToIp | read-only | current | Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile. |
| 1.3.6.1.4.1.171.11.101.1.2.5.2.1.4 | ColumnswL2MulticastFilterAddressState | read-create | current | This object indicates the status of this entry. Setting value to createAndGo(4) will add the multicast address list specified in swL2MulticastFilterFromIp and … |
| 1.3.6.1.4.1.171.11.101.1.2.5.3 | TableswL2LimitedMulticastFilterPortTable | not-accessible | current | A table that used to bind port to profile id. |
| 1.3.6.1.4.1.171.11.101.1.2.5.3.1 | RowswL2LimitedMulticastFilterPortEntry | not-accessible | current | A list of information that used to bind port to profile id. |
| 1.3.6.1.4.1.171.11.101.1.2.5.3.1.1 | ColumnswL2LimitedMulticastFilterPortIndex | read-only | current | Specifies port as an index. |
| 1.3.6.1.4.1.171.11.101.1.2.5.3.1.2 | ColumnswL2LimitedMulticastFilterPortAccess | read-write | current | This object indicates the access status for each port. |
| 1.3.6.1.4.1.171.11.101.1.2.5.3.1.3 | ColumnswL2LimitedMulticastFilterPortProfileID | read-write | current | This object specifies a profile ID list for each port. |
| 1.3.6.1.4.1.171.11.101.1.2.5.3.1.4 | ColumnswL2LimitedMulticastFilterPortProfileStatus | read-create | current | Controls the multicast filter profile list which bind to each port. When set add(2), multicast filter profile ID list which specifies in swL2LimitedMulticastFi… |
| 1.3.6.1.4.1.171.11.101.1.2.5.4 | TableswL2MulticastFilterPortMaxGroupTable | not-accessible | current | A table that contains information about max group number based on port. |
| 1.3.6.1.4.1.171.11.101.1.2.5.4.1 | RowswL2MulticastFilterPortMaxGroupEntry | not-accessible | current | A list of max group number information for each port. |
| 1.3.6.1.4.1.171.11.101.1.2.5.4.1.1 | ColumnswL2MulticastFilterPortMaxGroupPortIndex | read-only | current | Specifies port number as table index. |
| 1.3.6.1.4.1.171.11.101.1.2.5.4.1.2 | ColumnswL2MulticastFilterPortMaxGroup | read-write | current | Specifies maximum multicast filter group numbers for each port. Default value is 256. |
| 1.3.6.1.4.1.171.11.101.1.2.6 | NodeswL2QOSMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.6.1 | TableswL2QOSBandwidthControlTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1 | RowswL2QOSBandwidthControlEntry | not-accessible | current | A list of information contained in the swL2QOSBandwidthControlTable. |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1.1 | ColumnswL2QOSBandwidthPortIndex | read-only | current | Indicates the port . |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1.2 | ColumnswL2QOSBandwidthRxRate | read-write | current | Indicates RX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1.3 | ColumnswL2QOSBandwidthTxRate | read-write | current | Indicates TX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1.4 | ColumnswL2QOSBandwidthRadiusRxRate | read-only | current | The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate. |
| 1.3.6.1.4.1.171.11.101.1.2.6.1.1.5 | ColumnswL2QOSBandwidthRadiusTxRate | read-only | current | The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate. |
| 1.3.6.1.4.1.171.11.101.1.2.6.2 | TableswL2QOSSchedulingTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.101.1.2.6.2.1 | RowswL2QOSSchedulingEntry | not-accessible | current | A list of information contained in the swL2QOSSchedulingTable. |
| 1.3.6.1.4.1.171.11.101.1.2.6.2.1.1 | ColumnswL2QOSSchedulingClassIndex | read-only | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.11.101.1.2.6.2.1.2 | ColumnswL2QOSSchedulingMaxPkts | read-write | current | Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its … |
| 1.3.6.1.4.1.171.11.101.1.2.6.2.1.3 | ColumnswL2QOSSchedulingMechanism | read-only | current | Indicates the mechanism of QoS scheduling. |
| 1.3.6.1.4.1.171.11.101.1.2.6.3 | TableswL2QOS8021pUserPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.101.1.2.6.3.1 | RowswL2QOS8021pUserPriorityEntry | not-accessible | current | A list of information contained in the swL2QOS8021pUserPriorityTable. |
| 1.3.6.1.4.1.171.11.101.1.2.6.3.1.1 | ColumnswL2QOS8021pUserPriorityIndex | read-only | current | The 802.1p user priority . |
| 1.3.6.1.4.1.171.11.101.1.2.6.3.1.2 | ColumnswL2QOS8021pUserPriorityClass | read-write | current | The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) … |
| 1.3.6.1.4.1.171.11.101.1.2.6.4 | TableswL2QOS8021pDefaultPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.11.101.1.2.6.4.1 | RowswL2QOS8021pDefaultPriorityEntry | not-accessible | current | A list of information contained in the swL2QOS8021pDefaultPriorityTable. |
| 1.3.6.1.4.1.171.11.101.1.2.6.4.1.1 | ColumnswL2QOS8021pDefaultPriorityIndex | read-only | current | Indicates the port number . |
| 1.3.6.1.4.1.171.11.101.1.2.6.4.1.2 | ColumnswL2QOS8021pDefaultPriority | read-write | current | The priority value to assign to untagged packets received by the switch ports on the switch.. |
| 1.3.6.1.4.1.171.11.101.1.2.6.4.1.3 | ColumnswL2QOS8021pRadiusPriority | read-only | current | The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. |
| 1.3.6.1.4.1.171.11.101.1.2.6.5 | ScalarswL2QOSSchedulingMechanismCtrl | read-write | current | This object controls QoS scheduling Mechanism. |
| 1.3.6.1.4.1.171.11.101.1.2.7 | NodeswL2PortSecurityMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.7.1 | TableswL2PortSecurityControlTable | not-accessible | current | A port security feature which controls the address leaning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function.… |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1 | RowswL2PortSecurityControlEntry | not-accessible | current | A list of information contained in the swL2PortSecurityControlTable. |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1.1 | ColumnswL2PortSecurityPortIndex | read-only | current | Indicates the secured port to lock address learning. |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1.2 | ColumnswL2PortSecurityMaxLernAddr | read-write | current | Indicates allowable number of addresses to be learned on this port. |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1.3 | ColumnswL2PortSecurityMode | read-write | current | Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the … |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1.4 | ColumnswL2PortSecurityAdmState | read-write | current | Indicates administration state of locking address. |
| 1.3.6.1.4.1.171.11.101.1.2.7.1.1.5 | ColumnswL2PortSecurityEntryClearCtrl | read-write | current | Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'. |
| 1.3.6.1.4.1.171.11.101.1.2.7.2 | NodeswL2PortSecurityDelCtrl | |||
| 1.3.6.1.4.1.171.11.101.1.2.7.2.1 | ScalarswL2PortSecurityDelVlanName | read-write | current | Indicates VLAN name. |
| 1.3.6.1.4.1.171.11.101.1.2.7.2.2 | ScalarswL2PortSecurityDelPort | read-write | current | Indicates the port. |
| 1.3.6.1.4.1.171.11.101.1.2.7.2.3 | ScalarswL2PortSecurityDelMacAddress | read-write | current | Specifies a MAC address. |
| 1.3.6.1.4.1.171.11.101.1.2.7.2.4 | ScalarswL2PortSecurityDelActivity | read-write | current | . |
| 1.3.6.1.4.1.171.11.101.1.2.7.3 | ScalarswL2PortSecurityTrapLogState | read-write | current | When enabled(2),whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant informati… |
| 1.3.6.1.4.1.171.11.101.1.2.8 | NodeswL2DhcpRelayMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.8.1 | ScalarswL2DhcpRelayState | read-write | current | This object indicates if the DHCP relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.8.2 | ScalarswL2DhcpRelayHopCount | read-write | current | This object indicates the maximum number of router hops that DHCP packets can cross. |
| 1.3.6.1.4.1.171.11.101.1.2.8.3 | ScalarswL2DhcpRelayTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP … |
| 1.3.6.1.4.1.171.11.101.1.2.8.4 | ScalarswL2DhcpRelayOption82State | read-write | current | This object indicates if the DHCP relay agent information option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.8.5 | ScalarswL2DhcpRelayOption82Check | read-write | current | This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.8.6 | ScalarswL2DhcpRelayOption82Policy | read-write | current | This object indicates the reforwarding policy of DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) … |
| 1.3.6.1.4.1.171.11.101.1.2.8.7 | TableswL2DhcpRelayCtrlTable | not-accessible | current | This table specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.101.1.2.8.7.1 | RowswL2DhcpRelayCtrlEntry | not-accessible | current | A list of information that specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.101.1.2.8.7.1.1 | ColumnswL2DhcpRelayCtrlInterfaceName | read-only | current | The name of the IP interface. |
| 1.3.6.1.4.1.171.11.101.1.2.8.7.1.2 | ColumnswL2DhcpRelayCtrlServer | read-only | current | The DHCP server IP address. |
| 1.3.6.1.4.1.171.11.101.1.2.8.7.1.3 | ColumnswL2DhcpRelayCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.101.1.2.9 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.9.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.101.1.2.9.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.101.1.2.9.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information that specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | The object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master… |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for … |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group . |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.101.1.2.9.3.1.8 | ColumnswL2TrunkActivePort | read-only | current | The object indicates the active port of a special trunk group. |
| 1.3.6.1.4.1.171.11.101.1.2.9.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.101.1.2.9.5 | TableswL2TrunkLACPPortTable | not-accessible | current | This table specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.101.1.2.9.5.1 | RowswL2TrunkLACPPortEntry | not-accessible | current | A list of information specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.171.11.101.1.2.9.5.1.1 | ColumnswL2TrunkLACPPortIndex | read-only | current | The index of logical port LACP. |
| 1.3.6.1.4.1.171.11.101.1.2.9.5.1.2 | ColumnswL2TrunkLACPPortState | read-write | current | The state of logical port LACP. |
| 1.3.6.1.4.1.171.11.101.1.2.9.6 | TableswL2TrunkVLANTable | not-accessible | current | This table is used to manage the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.9.6.1 | RowswL2TrunkVLANEntry | not-accessible | current | This object is used to configure the VLAN trunking settings for each port. |
| 1.3.6.1.4.1.171.11.101.1.2.9.6.1.1 | ColumnswL2TrunkVLANPort | read-only | current | This object indicates the port being configured. |
| 1.3.6.1.4.1.171.11.101.1.2.9.6.1.2 | ColumnswL2TrunkVLANState | read-write | current | The state of the logical port LACP. |
| 1.3.6.1.4.1.171.11.101.1.2.10 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.10.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the seq… |
| 1.3.6.1.4.1.171.11.101.1.2.10.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the port where ingress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.101.1.2.10.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the port where egress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.101.1.2.10.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.101.1.2.11 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.11.1 | ScalarswL2IGMPMaxSupportedVlans | read-only | current | Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable). |
| 1.3.6.1.4.1.171.11.101.1.2.11.2 | ScalarswL2IGMPMaxIpGroupNumPerVlan | read-only | current | Maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table(swL2IGMPQueryInfoTable). |
| 1.3.6.1.4.1.171.11.101.1.2.11.3 | TableswL2IGMPCtrlTable | not-accessible | current | The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1 | RowswL2IGMPCtrlEntry | not-accessible | current | The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.1 | ColumnswL2IGMPCtrlVid | read-only | current | This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is … |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.2 | ColumnswL2IGMPQueryInterval | read-write | current | The frequency at which IGMP Host-Query packets are transmitted on this switch. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.3 | ColumnswL2IGMPMaxResponseTime | read-write | current | The maximum query response time on this switch. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.4 | ColumnswL2IGMPRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.5 | ColumnswL2IGMPLastMemberQueryInterval | read-write | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.6 | ColumnswL2IGMPHostTimeout | read-write | current | The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.7 | ColumnswL2IGMPRouteTimeout | read-write | current | The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.8 | ColumnswL2IGMPLeaveTimer | read-write | current | When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeav… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.9 | ColumnswL2IGMPQueryState | read-write | current | This object decides if the IGMP query is enabled or disabled. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.10 | ColumnswL2IGMPCurrentState | read-only | current | This object indicates the current IGMP query state. |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.11 | ColumnswL2IGMPCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.12 | ColumnswL2IGMPFastLeaveState | read-write | current | This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are diffe… |
| 1.3.6.1.4.1.171.11.101.1.2.11.3.1.13 | ColumnswL2IGMPQueryVersion | read-write | current | Configure the IGMP version of query packet which will be sent by router. |
| 1.3.6.1.4.1.171.11.101.1.2.11.4 | TableswL2IGMPQueryInfoTable | not-accessible | current | The table contains the number current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.171.11.101.1.2.11.4.1 | RowswL2IGMPQueryInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entry are all enabled. |
| 1.3.6.1.4.1.171.11.101.1.2.11.4.1.1 | ColumnswL2IGMPInfoVid | read-only | current | This object indicates the VID of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable). |
| 1.3.6.1.4.1.171.11.101.1.2.11.4.1.2 | ColumnswL2IGMPInfoQueryCount | read-only | current | This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.101.1.2.11.4.1.3 | ColumnswL2IGMPInfoTxQueryCount | read-only | current | This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to relate… |
| 1.3.6.1.4.1.171.11.101.1.2.11.6 | TableswL2IGMPRouterPortTable | not-accessible | current | The information of the router port table. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1 | RowswL2IGMPRouterPortEntry | not-accessible | current | The entry of swL2IGMPRouterPortTable. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1.1 | ColumnswL2IGMPRouterPortVlanid | read-only | current | This object indicates the VLAN ID of the router port entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1.2 | ColumnswL2IGMPRouterPortVlanName | read-only | current | This object indicates the VLAN name of the router port entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1.3 | ColumnswL2IGMPRouterPortStaticPortList | read-write | current | This object indicates the static portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1.4 | ColumnswL2IGMPRouterPortDynamicPortList | read-only | current | This object indicates the dynamic portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.6.1.5 | ColumnswL2IGMPRouterPortForbiddenPortList | read-write | current | This object indicates the forbidden portlist of the router port entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11 | TableswIGMPSnoopingGroupTable | not-accessible | current | The table contains the current IGMP snooping group information captured by the device. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1 | RowswIGMPSnoopingGroupEntry | not-accessible | current | Information about the current IGMP snooping group information which has been captured by the device. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.1 | ColumnswIGMPSnoopingGroupVid | read-only | current | This object indicates the VID of the individual IGMP snooping group table entry. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.2 | ColumnswIGMPSnoopingGroupGroupAddr | read-only | current | This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.3 | ColumnswIGMPSnoopingGroupSourceAddr | read-only | current | This object identifies the source addresses. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.4 | ColumnswIGMPSnoopingGroupIncludePortMap | read-only | current | This object indicates the port list under INCLUDE mode. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.5 | ColumnswIGMPSnoopingGroupExcludePortMap | read-only | current | This object indicates the port list under EXCLUDE mode. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.6 | ColumnswIGMPSnoopingGroupReportCount | read-only | current | This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basi… |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.7 | ColumnswIGMPSnoopingGroupUpTime | read-only | current | This object indicates how long since the group was detected. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.8 | ColumnswIGMPSnoopingGroupExpiryTime | read-only | current | This object indicates the time left before this group will be aged out. |
| 1.3.6.1.4.1.171.11.101.1.2.11.11.1.9 | ColumnswIGMPSnoopingGroupRouterPorts | read-only | current | This object indicates the port number of the router ports. |
| 1.3.6.1.4.1.171.11.101.1.2.11.12 | NodeswL2IGMPDynIpMultMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.11.12.1 | ScalarswL2IGMPDynIPMultMaxEntry | read-write | current | This object specifies the maximum number of entries which can be learned by dynamic IP multicast |
| 1.3.6.1.4.1.171.11.101.1.2.11.12.3 | TableswL2IGMPDynIPMultCtrlTable | not-accessible | current | This table is used to manage the IGMP dynamic IP multicast. |
| 1.3.6.1.4.1.171.11.101.1.2.11.12.3.1 | RowswL2IGMPDynIPMultCtrlEntry | not-accessible | current | A list of manageable entities for IGMP dynamic IP multicast. |
| 1.3.6.1.4.1.171.11.101.1.2.11.12.3.1.1 | ColumnswL2IGMPDynIPMultVlanState | read-write | current | This object is used to disable or enable the dynamic IP multicast feature in this VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.11.12.3.1.2 | ColumnswL2IGMPDynIPMultVlanAge | read-write | current | This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.11.20 | TableswL2IGMPAccessAuthTable | not-accessible | current | This table is used to manage the IGMP Access Authentication configurations of the device. |
| 1.3.6.1.4.1.171.11.101.1.2.11.20.1 | RowswL2IGMPAccessAuthEntry | not-accessible | current | A list of manageable entities for IGMP Access Authentication. The configuration is done per port. |
| 1.3.6.1.4.1.171.11.101.1.2.11.20.1.1 | ColumnswL2IGMPAccessAuthPort | read-only | current | The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. |
| 1.3.6.1.4.1.171.11.101.1.2.11.20.1.2 | ColumnswL2IGMPAccessAuthState | read-write | current | This object denotes the status of IGMP Access Authentication of the port. |
| 1.3.6.1.4.1.171.11.101.1.2.14 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.14.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.101.1.2.14.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information which specifies the port with its traffic forwarding list. |
| 1.3.6.1.4.1.171.11.101.1.2.14.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.101.1.2.14.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list to which the specific port can forward traffic. |
| 1.3.6.1.4.1.171.11.101.1.2.17 | NodeswL2MulticastFilterMode | |||
| 1.3.6.1.4.1.171.11.101.1.2.17.1 | TableswL2MulticastFilterModeVlanTable | not-accessible | current | A table that contains information about VLAN multicast filter mode. |
| 1.3.6.1.4.1.171.11.101.1.2.17.1.1 | RowswL2MulticastFilterModeVlanEntry | not-accessible | current | A list of multicast filter mode information for each VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.17.1.1.1 | ColumnswL2MulticastFilterVid | read-only | current | Indicates VID for each VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.17.1.1.2 | ColumnswL2MulticastFilterVlanMode | read-write | current | Specifies multicast filter mode for each VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.18 | NodeswL2LoopDetectMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.18.1 | NodeswL2LoopDetectCtrl | |||
| 1.3.6.1.4.1.171.11.101.1.2.18.1.1 | ScalarswL2LoopDetectAdminState | read-write | current | This object indicates the loopback detection status for the system. |
| 1.3.6.1.4.1.171.11.101.1.2.18.1.2 | ScalarswL2LoopDetectInterval | read-write | current | This object indicates the interval value, the range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.11.101.1.2.18.1.3 | ScalarswL2LoopDetectRecoverTime | read-write | current | This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.11.101.1.2.18.1.4 | ScalarswL2LoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.11.101.1.2.18.1.5 | ScalarswL2LoopDetectTrapMode | read-write | current | This object indicates the loopback detection trap mode for the system. |
| 1.3.6.1.4.1.171.11.101.1.2.18.2 | NodeswL2LoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1 | TableswL2LoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1.1 | RowswL2LoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1.1.1 | ColumnswL2LoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1.1.2 | ColumnswL2LoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1.1.3 | ColumnswL2LoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.11.101.1.2.18.2.1.1.4 | ColumnswL2LoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.11.101.1.2.24 | NodeswL2DhcpLocalRelayMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.24.1 | ScalarswL2DhcpLocalRelayState | read-write | current | This object indicates the status of the DHCP local relay function of the switch. |
| 1.3.6.1.4.1.171.11.101.1.2.24.2 | TableswL2DhcpLocalRelayVLANTable | not-accessible | current | This table is used to manage the DHCP local relay status for each VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.24.2.1 | RowswL2DhcpLocalRelayVLANEntry | not-accessible | current | This object lists the current VLANs in the switch and their corresponding DHCP local relay status. |
| 1.3.6.1.4.1.171.11.101.1.2.24.2.1.1 | ColumnswL2DhcpLocalRelayVLANID | read-only | current | This object shows the VIDs of the current VLANS in the switch. |
| 1.3.6.1.4.1.171.11.101.1.2.24.2.1.2 | ColumnswL2DhcpLocalRelayVLANState | read-write | current | This object indicates the status of the DHCP relay function of the VLAN. |
| 1.3.6.1.4.1.171.11.101.1.2.100 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1 | NodeswL2Notify | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1.1 | NodeswL2NotifyMgmt | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2 | NodeswL2NotifyPrefix | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0 | NodeswL2NotifFirmware | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.1 | NotificationswL2macNotification | current | This trap indicates the MAC addresses variation in address table . | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out. | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.3 | NotificationswL2PortLoopOccurred | current | The trap is sent when a Port loop occurs. | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.4 | NotificationswL2PortLoopRestart | current | The trap is sent when a Port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.5 | NotificationswL2VlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.6 | NotificationswL2VlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates the last time reboot information. |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.1.2 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violates the port security configuration. |
| 1.3.6.1.4.1.171.11.101.1.2.100.1.2.1.3 | ScalarswL2VlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that detected a loopback. |