DGS3450-L3MGMT-MIB
139 objects
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus TimeStamp TruthValue |
| SW34XXPRIMGMT-MIB | dgs3450 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.70.3.3 | IdentityswL3MgmtMIB | The Structure of Layer 3 Network Management Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.11.70.3.3.1 | NodeswL3DevMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.1.1 | NodeswL3DevCtrl | |||
| 1.3.6.1.4.1.171.11.70.3.3.1.1.1 | ScalarswL3DevCtrlRIPState | read-write | current | This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.2 | NodeswL3IpMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.2.1 | NodeswL3IpCtrlMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3 | TableswL3IpCtrlTable | not-accessible | current | This table contain IP interface information. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1 | RowswL3IpCtrlEntry | not-accessible | current | A list of information about a specific IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.1 | ColumnswL3IpCtrlInterfaceName | read-only | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.2 | ColumnswL3IpCtrlIfIndex | read-only | current | This object uniquely identifies the IP interface number in the swL3IpCtrlTable. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.3 | ColumnswL3IpCtrlIpAddr | read-write | current | The IP address of the interface. This object only can take the value of the unicast IP address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.4 | ColumnswL3IpCtrlIpSubnetMask | read-write | current | The IP net mask for this interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.5 | ColumnswL3IpCtrlVlanName | read-write | current | This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.6 | ColumnswL3IpCtrlProxyArp | read-write | current | This object indicates enable/disable of the proxy ARP function for IPv4. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.7 | ColumnswL3IpCtrlSecondary | read-write | current | When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.8 | ColumnswL3IpCtrlMode | read-write | current | This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of … |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.9 | ColumnswL3IpCtrlAdminState | read-write | current | The state of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.14 | ColumnswL3IpCtrlIpv6LinkLocalAddress | read-only | current | The IPv6 link local address for this interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.15 | ColumnswL3IpCtrlIpv6LinkLocalPrefixLen | read-only | current | The IPv6 prefix length for this IPv6 link local address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.16 | ColumnswL3IpCtrlState | read-create | current | This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.17 | ColumnswL3IpCtrlIpv6LinkLocalAutoState | read-write | current | The state of the IPv6 link local auto. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.18 | ColumnswL3IpCtrlLocalProxyArp | read-create | current | If the state is enabled, the switch will be allowed to respond to the proxy ARP proxy ARP when the source IP and destination IP are on the same interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.20 | ColumnswL3IpCtrlDhcpv6ClientState | read-write | current | The state of the Dhcpv6 Client. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.21 | ColumnswL3IpCtrlIpDirectedBroadcastState | read-write | current | The state of the IP Directed Broadcast. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.22 | ColumnswL3IpCtrlIpDhcpOption12State | read-write | current | Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.23 | ColumnswL3IpCtrlIpDhcpOption12HostName | read-write | current | Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit,… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.24 | ColumnswL3IpCtrlDhcpv6ClientPDState | read-write | current | The state of the Dhcpv6 Client PD. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.25 | ColumnswL3IpCtrlDhcpv6ClientPDPrefixName | read-write | current | This object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.26 | ColumnswL3IpCtrlDhcpv6ClientPDPrefix | read-only | current | The IPv6 prefix obtained form delegation router. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.3.1.27 | ColumnswL3IpCtrlDhcpv6ClientPDPrefixLen | read-only | current | The IPv6 prefix length for the prefix obtained from delegation router. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4 | TableswL3Ipv6CtrlTable | not-accessible | current | This table contains IPv6 information of an IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1 | RowswL3Ipv6CtrlEntry | not-accessible | current | A list of IPv6 information about a specific IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.1 | ColumnswL3Ipv6CtrlInterfaceName | read-only | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.2 | ColumnswL3Ipv6CtrlMaxReassmblySize | read-only | current | Maximum Reassembly Size of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.3 | ColumnswL3Ipv6CtrlNsRetransTimer | read-write | current | Neighbor solicitation's retransmit timer. The unit is set in milliseconds. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.5 | ColumnswL3Ipv6CtrlRaState | read-write | current | Neighbor solicited state. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.6 | ColumnswL3Ipv6CtrlRaMinRtrAdvInterval | read-write | current | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 … |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.7 | ColumnswL3Ipv6CtrlRaMaxRtrAdvInterval | read-write | current | The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.8 | ColumnswL3Ipv6CtrlRaLifeTime | read-write | current | Indicates the lifetime of the router as the default router. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.9 | ColumnswL3Ipv6CtrlRaReachableTime | read-write | current | Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.10 | ColumnswL3Ipv6CtrlRaRetransTime | read-write | current | Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.11 | ColumnswL3Ipv6CtrlRaHopLimit | read-write | current | Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.12 | ColumnswL3Ipv6CtrlRaManagedFlag | read-write | current | When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresse… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.4.1.13 | ColumnswL3Ipv6CtrlRaOtherConfigFlag | read-write | current | When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration informati… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5 | TableswL3Ipv6AddressCtrlTable | not-accessible | current | This table contain IPv6 address information for each IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1 | RowswL3Ipv6AddressCtrlEntry | not-accessible | current | A list of information about a specific IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.1 | ColumnswL3Ipv6AddressCtrlInterfaceName | read-only | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.2 | ColumnswL3Ipv6Address | read-only | current | Specify the IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.3 | ColumnswL3Ipv6AddressCtrlPrefixLen | read-only | current | Indicates the prefix length of this IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.4 | ColumnswL3Ipv6AddressCtrlPreferredLifeTime | read-write | current | Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an i… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.5 | ColumnswL3Ipv6AddressCtrlValidLifeTime | read-write | current | Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.6 | ColumnswL3Ipv6AddressCtrlOnLinkFlag | read-write | current | When enabled, the address implied by the specified prefix is available on the link where the RA message is received. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.7 | ColumnswL3Ipv6AddressCtrlAutonomousFlag | read-write | current | When enabled, the specified prefix will be used to create an autonomous address configuration. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.8 | ColumnswL3Ipv6AddressCtrlState | read-create | current | This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.5.1.9 | ColumnswL3Ipv6AddressCtrlAddressType | read-only | current | This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server… |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6 | TableswL3Ipv6DHCPv6CPDAddrCtrlTable | not-accessible | current | This table contain the information of the IPv6 address which based on DHCPv6 client PD. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1 | RowswL3Ipv6DHCPv6CPDAddrCtrlEntry | not-accessible | current | A list of information about a specific DHCPv6 Client PD IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1.1 | ColumnswL3Ipv6DHCPv6CPDAddrCtrlInterfaceName | read-only | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1.2 | ColumnswL3Ipv6DHCPv6CPDAddrCtrlPrefixName | read-only | current | This object indicates the name of the prefix based on which the IPv6 address will be generate. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1.3 | ColumnswL3Ipv6DHCPv6CPDAddrCtrlIPv6addr | read-only | current | Specify the suffix of the IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1.4 | ColumnswL3Ipv6DHCPv6CPDAddrCtrlPrefixLen | read-only | current | Indicates the prefix length of this IPv6 address. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.6.1.5 | ColumnswL3Ipv6DHCPv6CPDAddrCtrlState | read-create | current | This variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table. |
| 1.3.6.1.4.1.171.11.70.3.3.2.1.7 | ScalarswL3IpCtrlAllIpIfState | read-write | current | This object indicates all interface function state of the device. |
| 1.3.6.1.4.1.171.11.70.3.3.2.2 | NodeswL3IpFdbMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1 | TableswL3IpFdbInfoTable | not-accessible | current | A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets. |
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1.1 | RowswL3IpFdbInfoEntry | not-accessible | current | Information about a specific IP address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1.1.1 | ColumnswL3IpFdbInfoIpAddr | read-only | current | A IP address for which switch has forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1.1.2 | ColumnswL3IpFdbInfoIpSubnetMask | read-only | current | A IP net mask for this interface.for which switch has forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1.1.3 | ColumnswL3IpFdbInfoPort | read-only | current | Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAdd… |
| 1.3.6.1.4.1.171.11.70.3.3.2.2.1.1.4 | ColumnswL3IpFdbInfoType | read-only | current | The status of this entry. |
| 1.3.6.1.4.1.171.11.70.3.3.2.4 | ScalarswL3IpArpAgingTime | read-write | current | The timeout period in minutes for aging out dynamically learned arp information. |
| 1.3.6.1.4.1.171.11.70.3.3.2.5 | TableswL3IpStaticRouteTable | not-accessible | current | This entity's IP static Routing table. |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1 | RowswL3IpStaticRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and d… |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.1 | ColumnswL3IpStaticRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.2 | ColumnswL3IpStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems tha… |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.3 | ColumnswL3IpStaticRouteBkupState | read-only | current | The routing state for this route.The value SHOULD be primary(1) or backup(2). |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.4 | ColumnswL3IpStaticRouteNextHop | read-create | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.5 | ColumnswL3IpStaticRouteMetric | read-create | current | The routing metric for this route. |
| 1.3.6.1.4.1.171.11.70.3.3.2.5.1.6 | ColumnswL3IpStaticRouteStatus | read-create | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.70.3.3.3 | NodeswL3RelayMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.3.1 | NodeswL3RelayDhcpMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.3.1.1 | ScalarswL3RelayDhcpState | read-write | current | This object indicates Dhcp Relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.2 | ScalarswL3RelayDhcpHopCount | read-write | current | This object indicates the maximum number of router hops that the BOOTP packets can cross. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.3 | ScalarswL3RelayDhcpTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the Dhcp request. If this time is exceeded, the switch will drop the Dhcp … |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.4 | TableswL3RelayDhcpCtrlTable | not-accessible | current | This table specifys the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.4.1 | RowswL3RelayDhcpCtrlEntry | not-accessible | current | A list of information specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.4.1.1 | ColumnswL3RelayDhcpCtrlInterfaceName | read-only | current | The name of the IP interface. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.4.1.2 | ColumnswL3RelayDhcpCtrlServer | read-only | current | The DHCP server IP address. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.4.1.3 | ColumnswL3RelayDhcpCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.5 | ScalarswL3RelayDhcpOption82State | read-write | current | This object indicates DHCP Relay Option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.6 | ScalarswL3RelayDhcpOption82CheckState | read-write | current | This object indicates DHCP Relay Option 82 Check function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.7 | ScalarswL3RelayDhcpOption82Policy | read-write | current | This object indicates DHCP Relay Option 82 Policy. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8 | NodeswL3DHCPRelayOption60 | |||
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.1 | ScalarswL3DHCPRelayOption60State | read-write | current | This object indicates DHCP relay option 60 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.2 | ScalarswL3DHCPRelayOption60DefMode | read-write | current | This object indicates default mode that has no option 60 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRe… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.3 | TableswL3DHCPRelayOption60DefTable | not-accessible | current | This table indicates the default relay servers for the packet that has no option 60 mathcing rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.3.1 | RowswL3DHCPRelayOption60DefEntry | not-accessible | current | A list of information indicates the default relay servers for the packet that has no option 60 mathcing rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.3.1.1 | ColumnswL3DHCPRelayOption60DefRelayIp | read-only | current | This object indicates the IP address of default relay server. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.3.1.2 | ColumnswL3DHCPRelayOption60DefRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4 | TableswL3DHCPRelayOption60Table | not-accessible | current | This table indicates the relay servers for the packet at option 60 rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4.1 | RowswL3DHCPRelayOption60Entry | not-accessible | current | A list of information indicates the relay servers for the packet at option 60 rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4.1.1 | ColumnswL3DHCPRelayOption60String | read-only | current | This object indicates string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4.1.2 | ColumnswL3DHCPRelayOption60RelayIp | read-only | current | This object indicates the IP address of relay server. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4.1.3 | ColumnswL3DHCPRelayOption60MatchType | read-create | current | This object indicates match state of this entry. exact(1): means the option 60 string in the packet must full match with the specified string. partial(2): mean… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.8.4.1.4 | ColumnswL3DHCPRelayOption60RowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9 | NodeswL3DHCPRelayOption61 | |||
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.1 | ScalarswL3DHCPRelayOption61State | read-write | current | This object indicates DHCP relay option 61 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.2 | ScalarswL3DHCPRelayOption61DefMode | read-write | current | This object indicates default mode that has no option 61 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRe… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.3 | ScalarswL3DHCPRelayOption61DefRelayIp | read-write | current | This object indicates the IP address of default relay server that has no option 61 mathcing rules. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1)… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4 | TableswL3DHCPRelayOption61Table | not-accessible | current | This table indicates the relay servers for the packet at option 61 rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1 | RowswL3DHCPRelayOption61Entry | not-accessible | current | A list of information indicates the relay servers for the packet at option 61 rules. |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1.1 | ColumnswL3DHCPRelayOption61ClientType | read-only | current | This object indicates client type of this entry. mac(1): means the client-ID which is the MAC address of client. string(2): means the client-ID which is specif… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1.2 | ColumnswL3DHCPRelayOption61ClientID | read-only | current | This object indicates string of this entry. When swL3DHCPRelayOption61ClientType is mac(1), the format of this object should be XX-XX-XX-XX-XX-XX (MAC address)… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1.3 | ColumnswL3DHCPRelayOption61Mode | read-create | current | This object indicates mode of this entry. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61RelayIp. drop(2): me… |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1.4 | ColumnswL3DHCPRelayOption61RelayIp | read-create | current | This object indicates the IP address of relay server. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): … |
| 1.3.6.1.4.1.171.11.70.3.3.3.1.9.4.1.5 | ColumnswL3DHCPRelayOption61RowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2 | NodeswL3RelayDnsMgmt | |||
| 1.3.6.1.4.1.171.11.70.3.3.3.2.1 | ScalarswL3RelayDnsState | read-write | current | This object indicates DNS Relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.2 | ScalarswL3RelayDnsPrimaryServer | read-write | current | This object indicates the address of the primary DNS server. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.3 | ScalarswL3RelayDnsSecondaryServer | read-write | current | This object indicates the address of the secondary DNS server. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.4 | ScalarswL3RelayDnsCacheState | read-write | current | This object indicates DNS Relay cache is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.5 | ScalarswL3RelayDnsStaticTableState | read-write | current | This object indicates DNS Relay static table is enabled or disabled. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.6 | TableswL3RelayDnsCtrlTable | not-accessible | current | This table display the current DNS relay static table. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.6.1 | RowswL3RelayDnsCtrlEntry | not-accessible | current | A list of information display the current DNS relay static table. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.6.1.1 | ColumnswL3RelayDnsCtrlDomainName | read-only | current | The domain name of the entry. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.6.1.2 | ColumnswL3RelayDnsCtrlIpAddr | read-only | current | The IP address of the entry. |
| 1.3.6.1.4.1.171.11.70.3.3.3.2.6.1.3 | ColumnswL3RelayDnsCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.70.3.3.5 | TableswL3RouteRedistriTable | not-accessible | current | Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by compar… |
| 1.3.6.1.4.1.171.11.70.3.3.5.1 | RowswL3RouteRedistriEntry | not-accessible | current | A list of information displaying the route redistribution table. |
| 1.3.6.1.4.1.171.11.70.3.3.5.1.1 | ColumnswL3RouteRedistriSrcProtocol | read-only | current | Allows the selection of the protocol of the source device. |
| 1.3.6.1.4.1.171.11.70.3.3.5.1.2 | ColumnswL3RouteRedistriDstProtocol | read-only | current | Allows the selection of the protocol of the destination device. |
| 1.3.6.1.4.1.171.11.70.3.3.5.1.4 | ColumnswL3RouteRedistriMetric | read-create | current | Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value. |
| 1.3.6.1.4.1.171.11.70.3.3.5.1.5 | ColumnswL3RouteRedistriRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.70.3.3.9 | NodeswL3RoutePreference | |||
| 1.3.6.1.4.1.171.11.70.3.3.9.1 | ScalarswL3RoutePreferenceRIP | read-write | current | Used to configure the route preference of RIP. |
| 1.3.6.1.4.1.171.11.70.3.3.9.3 | ScalarswL3RoutePreferenceStatic | read-write | current | Used to configure the route preference of Static. |
| 1.3.6.1.4.1.171.11.70.3.3.9.4 | ScalarswL3RoutePreferenceLocal | read-only | current | Used to read the route preference of Local. |
| 1.3.6.1.4.1.171.11.70.3.3.9.8 | ScalarswL3RoutePreferenceDefault | read-write | current | Used to configure the route preference of Default. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6Address | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |