DHCP-RELAY-MGMT-MIB
83 objects
The structure of DHCP relay management for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| Q-BRIDGE-MIB | VlanId |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.42 | IdentityswDHCPRelayMIB | The structure of DHCP relay management for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.42.1 | NodeswDHCPRelayCtrl | |||
| 1.3.6.1.4.1.171.12.42.1.1 | ScalarswDHCPRelayState | read-write | current | This object indicates whether the DHCP relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.12.42.1.2 | ScalarswDHCPRelayHopCount | read-write | current | This object indicates the maximum number of router hops that the BOOTP packets can cross. |
| 1.3.6.1.4.1.171.12.42.1.3 | ScalarswDHCPRelayTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP … |
| 1.3.6.1.4.1.171.12.42.2 | NodeswDHCPRelayInfo | |||
| 1.3.6.1.4.1.171.12.42.3 | NodeswDHCPRelayMgmt | |||
| 1.3.6.1.4.1.171.12.42.3.1 | TableswDHCPRelayCtrlTable | not-accessible | current | This table indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.12.42.3.1.1 | RowswDHCPRelayCtrlEntry | not-accessible | current | A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.12.42.3.1.1.1 | ColumnswDHCPRelayCtrlInterfaceName | read-only | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.12.42.3.1.1.2 | ColumnswDHCPRelayCtrlServer | read-only | current | This object indicates the DHCP server IP address. |
| 1.3.6.1.4.1.171.12.42.3.1.1.3 | ColumnswDHCPRelayCtrlRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.42.3.2 | NodeswDHCPRelayOption82 | |||
| 1.3.6.1.4.1.171.12.42.3.2.1 | ScalarswDHCPRelayOption82State | read-write | current | This object indicates whether the DHCP relay option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.12.42.3.2.2 | ScalarswDHCPRelayOption82CheckState | read-write | current | This object indicates whether the DHCP relay option 82 check function is enabled or disabled. |
| 1.3.6.1.4.1.171.12.42.3.2.3 | ScalarswDHCPRelayOption82Policy | read-write | current | This object indicates the DHCP relay option 82 policy. |
| 1.3.6.1.4.1.171.12.42.3.2.4 | ScalarswDHCPRelayOption82RemoteIDType | read-write | current | This object indicates the type of remote ID. If the type is default,the remote ID will be the System��s MAC address. If the type is user-defined, the remot… |
| 1.3.6.1.4.1.171.12.42.3.2.5 | ScalarswDHCPRelayOption82RemoteID | read-write | current | This object displays the current remote ID of the device. If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device… |
| 1.3.6.1.4.1.171.12.42.3.2.6 | ScalarswDHCPRelayOption82CircuitIDType | read-write | current | This object indicates the type of circuit ID.If the type is default,the circuit ID will be the VLAN ID, Module ID and Port Number. If the type is user-defined … |
| 1.3.6.1.4.1.171.12.42.3.2.7 | ScalarswDHCPRelayOption82CircuitID | read-write | current | This object displays the current circuit ID of the device. If swDHCPRelayOption82CircuitIDType is set to user-defined, a new value can be written to this objec… |
| 1.3.6.1.4.1.171.12.42.3.2.8 | TableswDHCPRelayOption82PerPortRemoteIdTable | not-accessible | current | This table is used to manage the DHCP relay Option82 Remote ID for each client.And this configure will override the configure of swDHCPRelayOption82RemoteId fo… |
| 1.3.6.1.4.1.171.12.42.3.2.8.1 | RowswDHCPRelayOption82PerPortRemoteIdEntry | not-accessible | current | This object lists indicates the DHCP relay Option82 Remote ID for each client. |
| 1.3.6.1.4.1.171.12.42.3.2.8.1.1 | ColumnswDHCPRelayOption82PerPortRemoteIdPortIndex | not-accessible | current | This object indicates the Client's port number. |
| 1.3.6.1.4.1.171.12.42.3.2.8.1.2 | ColumnswDHCPRelayOption82PerPortRemoteIdType | read-write | current | This object indicates the type of port's remote ID. If the type is vendor3, the remote ID can be defined by writing to the swDHCPRelayOption82PerPortRemoteIdVa… |
| 1.3.6.1.4.1.171.12.42.3.2.8.1.3 | ColumnswDHCPRelayOption82PerPortRemoteIdValue | read-write | current | This object displays the current remote ID of the special port. If swDHCPRelayOption82PerPortRemoteIdType is set to vendor3,a new value can be written to this … |
| 1.3.6.1.4.1.171.12.42.3.2.9 | TableswDHCPRelayOption82PerPortCircuitIdTable | not-accessible | current | This table is used to manage the DHCP relay Option82 Circuit ID for each client.And this configure will override the configure of swDHCPRelayOption82CircuitId … |
| 1.3.6.1.4.1.171.12.42.3.2.9.1 | RowswDHCPRelayOption82PerPortCircuitIdEntry | not-accessible | current | This object lists indicates the DHCP relay Option82 Circuit ID for each client. |
| 1.3.6.1.4.1.171.12.42.3.2.9.1.1 | ColumnswDHCPRelayOption82PerPortCircuitIdPortIndex | not-accessible | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.12.42.3.2.9.1.2 | ColumnswDHCPRelayOption82PerPortCircuitIdType | read-write | current | This object indicates the type of client's circuit ID.If the type is vendor3,the circuit ID can be defined by writing to the swDHCPRelayOption82PerPortCircuitI… |
| 1.3.6.1.4.1.171.12.42.3.2.9.1.3 | ColumnswDHCPRelayOption82PerPortCircuitIdValue | read-write | current | This object displays the current circuit ID of client. If swDHCPRelayOption82PerPortCircuitIdType is set to vendor3, a new value can be written to this object. |
| 1.3.6.1.4.1.171.12.42.3.3 | NodeswDHCPRelayOption60 | |||
| 1.3.6.1.4.1.171.12.42.3.3.1 | ScalarswDHCPRelayOption60State | read-write | current | This object indicates whether the DHCP relay option 60 function is enabled or disabled. |
| 1.3.6.1.4.1.171.12.42.3.3.2 | ScalarswDHCPRelayOption60DefMode | read-write | current | This object indicates default mode that has no option 60 matching rules. relay (1): means to relay the packet to the IP address which is specified by swDHCPRel… |
| 1.3.6.1.4.1.171.12.42.3.3.3 | TableswDHCPRelayOption60DefTable | not-accessible | current | This table indicates the default relay servers for the packet that has no option 60 matching rules. |
| 1.3.6.1.4.1.171.12.42.3.3.3.1 | RowswDHCPRelayOption60DefEntry | not-accessible | current | A list of information indicates the default relay servers for the packet that has no option 60 matching rules. |
| 1.3.6.1.4.1.171.12.42.3.3.3.1.1 | ColumnswDHCPRelayOption60DefRelayIp | read-only | current | This object indicates the IP address of the default relay server. |
| 1.3.6.1.4.1.171.12.42.3.3.3.1.2 | ColumnswDHCPRelayOption60DefRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.42.3.3.4 | TableswDHCPRelayOption60Table | not-accessible | current | This table indicates the relay servers for the packet for option 60 rules. |
| 1.3.6.1.4.1.171.12.42.3.3.4.1 | RowswDHCPRelayOption60Entry | not-accessible | current | A list of information indicates the relay servers for the packet for option 60 rules. |
| 1.3.6.1.4.1.171.12.42.3.3.4.1.1 | ColumnswDHCPRelayOption60String | read-only | current | This object indicates the string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identi… |
| 1.3.6.1.4.1.171.12.42.3.3.4.1.2 | ColumnswDHCPRelayOption60RelayIp | read-only | current | This object indicates the IP address of the relay server. |
| 1.3.6.1.4.1.171.12.42.3.3.4.1.3 | ColumnswDHCPRelayOption60MatchType | read-create | current | This object indicates the match state of this entry. exact (1): Means the option 60 string in the packet must fully match the specified string. partial (2): Me… |
| 1.3.6.1.4.1.171.12.42.3.3.4.1.4 | ColumnswDHCPRelayOption60RowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.42.3.4 | NodeswDHCPRelayOption61 | |||
| 1.3.6.1.4.1.171.12.42.3.4.1 | ScalarswDHCPRelayOption61State | read-write | current | This object indicates whether the DHCP relay option 61 function is enabled or disabled. |
| 1.3.6.1.4.1.171.12.42.3.4.2 | ScalarswDHCPRelayOption61DefMode | read-write | current | This object indicates the default mode has no option 61 matching rules. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRela… |
| 1.3.6.1.4.1.171.12.42.3.4.3 | ScalarswDHCPRelayOption61DefRelayIp | read-write | current | This object indicates the IP address of the default relay server has no option 61 matching rules. Pay attention to when swDHCPRelayOption61Mode is: relay (1): … |
| 1.3.6.1.4.1.171.12.42.3.4.4 | TableswDHCPRelayOption61Table | not-accessible | current | This table indicates the relay servers for the packet for option 61 rules. |
| 1.3.6.1.4.1.171.12.42.3.4.4.1 | RowswDHCPRelayOption61Entry | not-accessible | current | A list of information indicates the relay servers for the packet for option 61 rules. |
| 1.3.6.1.4.1.171.12.42.3.4.4.1.1 | ColumnswDHCPRelayOption61ClientType | read-only | current | This object indicates the client type of this entry. mac (1): Means the client-ID which is the MAC address of a client. string (2): Means the client-ID which i… |
| 1.3.6.1.4.1.171.12.42.3.4.4.1.2 | ColumnswDHCPRelayOption61ClientID | read-only | current | This object indicates the string of this entry. Note: When the swDHCPRelayOption61ClientType is mac (1), the format of this object should be XX.XX.XX.XX.XX.XX … |
| 1.3.6.1.4.1.171.12.42.3.4.4.1.3 | ColumnswDHCPRelayOption61Mode | read-create | current | This object indicates mode of this entry. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61RelayIp. drop (2): Me… |
| 1.3.6.1.4.1.171.12.42.3.4.4.1.4 | ColumnswDHCPRelayOption61RelayIp | read-create | current | This object indicates the IP address of the relay server. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (… |
| 1.3.6.1.4.1.171.12.42.3.4.4.1.5 | ColumnswDHCPRelayOption61RowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.42.3.5 | TableswDHCPRelayVlanCtrlTable | not-accessible | current | This table indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.12.42.3.5.1 | RowswDHCPRelayVlanCtrlEntry | not-accessible | current | A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.12.42.3.5.1.1 | ColumnswDHCPRelayVlanCtrlServer | not-accessible | current | This object indicates the DHCP server IP address. |
| 1.3.6.1.4.1.171.12.42.3.5.1.2 | ColumnswDHCPRelayVlanCtrlVlanRangeList1to64 | read-create | current | This object indicates the VLAN range (1-512) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.3 | ColumnswDHCPRelayVlanCtrlVlanRangeList65to128 | read-create | current | This object indicates the VLAN range (513-1024) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.4 | ColumnswDHCPRelayVlanCtrlVlanRangeList129to192 | read-create | current | This object indicates the VLAN range (1025-1536) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.5 | ColumnswDHCPRelayVlanCtrlVlanRangeList193to256 | read-create | current | This object indicates the VLAN range (1537-2048) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.6 | ColumnswDHCPRelayVlanCtrlVlanRangeList257to320 | read-create | current | This object indicates the VLAN range (2049-2560) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.7 | ColumnswDHCPRelayVlanCtrlVlanRangeList321to384 | read-create | current | This object indicates the VLAN range (2561-3072) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.8 | ColumnswDHCPRelayVlanCtrlVlanRangeList385to448 | read-create | current | This object indicates the VLAN range (3073-3584) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.9 | ColumnswDHCPRelayVlanCtrlVlanRangeList449to512 | read-create | current | This object indicates the VLAN range (3585-4096) that added the specific server. |
| 1.3.6.1.4.1.171.12.42.3.5.1.10 | ColumnswDHCPRelayVlanCtrlRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.42.3.6 | TableswDHCPRelayPortStateCtrlTable | not-accessible | current | This table is used to manage the DHCP relay state for each port. |
| 1.3.6.1.4.1.171.12.42.3.6.1 | RowswDHCPRelayPortStateCtrlEntry | not-accessible | current | This object lists the current ports in the switch and their corresponding DHCP relay state. |
| 1.3.6.1.4.1.171.12.42.3.6.1.1 | ColumnswDHCPRelayPortStateCtrlPortIndex | not-accessible | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.12.42.3.6.1.2 | ColumnswDHCPRelayPortStateCtrlState | read-write | current | This object indicates the state of the DHCP relay of each port. |
| 1.3.6.1.4.1.171.12.42.3.7 | TableswDHCPRelaySendArpByCidTable | not-accessible | current | This table is used to manage the DHCP relay send ARP to DHCP Server include the inner vid. |
| 1.3.6.1.4.1.171.12.42.3.7.1 | RowswDHCPRelaySendArpByCidEntry | not-accessible | current | This object lists the current each DHCP Server configuration inner vid. |
| 1.3.6.1.4.1.171.12.42.3.7.1.1 | ColumnswDHCPRelaySendArpByCidInnerVid | read-write | current | This object indicates the inner vid or null vid. 0: not insert inner vid. 1-4094: inner vid. |
| 1.3.6.1.4.1.171.12.42.4 | NodeswDHCPLocalRelayMgmt | |||
| 1.3.6.1.4.1.171.12.42.4.1 | ScalarswDHCPLocalRelayGlobalState | read-write | current | This object indicates the state of the DHCP local relay function of the switch. |
| 1.3.6.1.4.1.171.12.42.4.2 | TableswDHCPLocalRelayVlanTable | not-accessible | current | This table is used to manage the DHCP local relay status for each VLAN. |
| 1.3.6.1.4.1.171.12.42.4.2.1 | RowswDHCPLocalRelayVlanEntry | not-accessible | current | This object lists the current VLANs in the switch and their corresponding DHCP local relay status. |
| 1.3.6.1.4.1.171.12.42.4.2.1.1 | ColumnswDHCPLocalRelayVlanID | not-accessible | current | This object indicates the VLAN ID. |
| 1.3.6.1.4.1.171.12.42.4.2.1.2 | ColumnswDHCPLocalRelayState | read-write | current | This object indicates the state of the DHCP relay function of the specified VLAN. |
| 1.3.6.1.4.1.171.12.42.4.3 | TableswDHCPLocalRelayOption82Table | not-accessible | current | This table is used to manage the DHCP local relay option 82 policy for each port. |
| 1.3.6.1.4.1.171.12.42.4.3.1 | RowswDHCPLocalRelayOption82Entry | not-accessible | current | This object lists the current ports in the switch and their corresponding DHCP local relay option 82 policy. |
| 1.3.6.1.4.1.171.12.42.4.3.1.1 | ColumnswDHCPLocalRelayOption82PortIndex | not-accessible | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.12.42.4.3.1.2 | ColumnswDHCPLocalRelayOption82Policy | read-write | current | This object indicates the policy of the DHCP local relay option 82 of each port. |