DHS3226-MIB
109 objects
The Structure of Layer 2 Network Management Information for the D-Link enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-Dhs3226Prod dlink-mgmt |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.36.1.1 | NodeswL2Property | |||
| 1.3.6.1.4.1.171.10.36.1.1.1 | NodeswL2Module | |||
| 1.3.6.1.4.1.171.11.36.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information for the D-Link enterprise. | ||
| 1.3.6.1.4.1.171.11.36.2.1 | NodeswL2BwMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.1.1 | ScalarswL2BwMgmtFEPortUnitBandwidth | read-only | current | Indicates the represented bandwidth for each unit if the counting type is for Fast Ethernet ports. |
| 1.3.6.1.4.1.171.11.36.2.1.2 | ScalarswL2BwMgmtGEPortUnitBandwidth | read-only | current | Indicates the represented bandwidth for each unit if the counting type is for Gigabit Ethernet ports. |
| 1.3.6.1.4.1.171.11.36.2.1.3 | NodeswL2IngrPortBwControl | |||
| 1.3.6.1.4.1.171.11.36.2.1.3.3 | TableswL2IngrPortBwCtrlTable | not-accessible | current | A table that contains the current control information about the ingress bandwidth of port |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1 | RowswL2IngrPortBwCtrlEntry | not-accessible | current | A list of information contained in swL2IngrPortBwCtrlTable. |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.1 | ColumnswL2IngrPortBwCtrlPort | not-accessible | current | Indicates the port to limit ingress bandwidth. |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.2 | ColumnswL2IngrPortBwCtrlPortCountType | read-only | current | Indicates the counting type of port. All the regular ports have the type fastEthernetPort, and the others have the type gigabitEthernetPort. If counting type i… |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.3 | ColumnswL2IngrPortBwCtrlPortNwayStatus | read-only | current | Indicates speed and duplex mode of port. |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.4 | ColumnswL2IngrPortBwCtrlUnit | read-write | current | Indicates the current units for the limitation of ingress bandwidth of port. |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.5 | ColumnswL2IngrPortBwCtrlRate | read-only | current | Indicates the limitation of forwarding bandwidth in kilobyte. The value should be that swL2IngrPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth, if counting … |
| 1.3.6.1.4.1.171.11.36.2.1.3.3.1.6 | ColumnswL2IngrPortBwCtrlStatus | read-write | current | Status of this entry. All the existed entries will return enabled(3). An entry will be created if this object is set to enabled(3) and not existed. If this obj… |
| 1.3.6.1.4.1.171.11.36.2.1.4 | NodeswL2EgressPortBwControl | |||
| 1.3.6.1.4.1.171.11.36.2.1.4.3 | TableswL2EgressPortBwCtrlTable | not-accessible | current | A table that contains the current control information about the egress bandwidth of port |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1 | RowswL2EgressPortBwCtrlEntry | not-accessible | current | A list of information contained in swL2EgressPortBwCtrlTable. |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.1 | ColumnswL2EgressPortBwCtrlPort | not-accessible | current | Indicates the port to limit egress bandwidth. |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.2 | ColumnswL2EgressPortBwCtrlPortCountType | read-only | current | Indicates the counting type of port. All the regular ports have the type fastEthernetPort, and the others have the type gigabitEthernetPort. If counting type i… |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.3 | ColumnswL2EgressPortBwCtrlPortNwayStatus | read-only | current | Indicates speed and duplex mode of port. |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.4 | ColumnswL2EgressPortBwCtrlUnit | read-write | current | Indicates the current units for the limitation of egress bandwidth of port. |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.5 | ColumnswL2EgressPortBwCtrlRate | read-only | current | Indicates the limitation of forwarding bandwidth in kilobyte. The value should be that swL2EgressPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth, if countin… |
| 1.3.6.1.4.1.171.11.36.2.1.4.3.1.6 | ColumnswL2EgressPortBwCtrlStatus | read-write | current | Status of this entry. All the existed entries will return enabled(3). An entry will be created if this object is set to enabled(3) and not existed. If this obj… |
| 1.3.6.1.4.1.171.11.36.2.2 | ScalarswL2GrpAddrFltrMode | read-write | current | Indicates the filtering mode for all ports. In forwardAllGrpAddr(2) mode - forward all group address, all frames destined for group MAC addresses are forwarded… |
| 1.3.6.1.4.1.171.11.36.2.3 | NodeswL2CosMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.3.1 | ScalarswL2CosScheduleMethod | read-write | current | Indicates the scheduling mechanism for CoS queues. In strict(2) mode - packet process will start from highest CoS queue for a given port, then moves on to the … |
| 1.3.6.1.4.1.171.11.36.2.3.2 | TableswL2CosControlTable | not-accessible | current | |
| 1.3.6.1.4.1.171.11.36.2.3.2.1 | RowswL2CosControlEntry | not-accessible | current | A list of information contained in swL2CosControlTable. |
| 1.3.6.1.4.1.171.11.36.2.3.2.1.1 | ColumnswL2CosQueueIndex | read-only | current | Indicates CoS Queue. |
| 1.3.6.1.4.1.171.11.36.2.3.2.1.2 | ColumnswL2CosMaxPackets | read-write | current | Indicates maximum packet count for a CoS Queue. This object only takes effect at roundRobin mode of swL2CosScheduleMethod. |
| 1.3.6.1.4.1.171.11.36.2.3.2.1.3 | ColumnswL2CosMaxLatency | read-write | current | Indicates maximum allowable latency for packet transmission on a CoS Queue such that the packets on this queue are not delayed more than the maximum allowable … |
| 1.3.6.1.4.1.171.11.36.2.4 | NodeswL2PortSecurityMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.4.1 | TableswL2PortSecurityControlTable | not-accessible | current | port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. … |
| 1.3.6.1.4.1.171.11.36.2.4.1.1 | RowswL2PortSecurityControlEntry | not-accessible | current | A list of information contained in swL2PortSecurityControlTable. |
| 1.3.6.1.4.1.171.11.36.2.4.1.1.1 | ColumnswL2PortSecurityPortIndex | read-only | current | Indicates the secured port to lock address learning. |
| 1.3.6.1.4.1.171.11.36.2.4.1.1.2 | ColumnswL2PortSecurityMaxLernAddr | read-write | current | Indicates allowable number of addresses to be learned at this port. |
| 1.3.6.1.4.1.171.11.36.2.4.1.1.3 | ColumnswL2PortSecurityMode | read-write | current | Indicates the mode of locking address. In deleteOnTimeout(2) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locke… |
| 1.3.6.1.4.1.171.11.36.2.4.1.1.4 | ColumnswL2PortSecurityAdmState | read-write | current | Indicates administration state of locking address. |
| 1.3.6.1.4.1.171.11.36.2.5 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.5.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.36.2.5.1.1 | ScalarswL2DevInfoSystemUpTime | read-only | current | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then… |
| 1.3.6.1.4.1.171.11.36.2.5.1.2 | ScalarswL2DevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.36.2.5.1.3 | ScalarswL2DevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.36.2.5.1.4 | ScalarswL2DevInfoConsoleInUse | read-only | current | This usage indication of console system. |
| 1.3.6.1.4.1.171.11.36.2.5.1.5 | ScalarswL2DevInfoFrontPanelLedStatus | read-only | current | This object is a set of system LED indications. The first third octets is defined as system LED . The first LED is power LED . The second LED is console LED . … |
| 1.3.6.1.4.1.171.11.36.2.5.1.6 | ScalarswL2DevInfoCpuUtilization | read-only | current | This object indicates CPU utilization |
| 1.3.6.1.4.1.171.11.36.2.5.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.36.2.5.2.1 | ScalarswL2DevCtrlSystemReboot | read-write | current | This object indicates the agent system reboot state. The agent always returns other(1) when this object is read. |
| 1.3.6.1.4.1.171.11.36.2.5.2.2 | ScalarswL2DevCtrlSystemIP | read-write | current | This object indicates system ip. |
| 1.3.6.1.4.1.171.11.36.2.5.2.3 | ScalarswL2DevCtrlSubnetMask | read-write | current | This object indicates system subnet mask. |
| 1.3.6.1.4.1.171.11.36.2.5.2.4 | ScalarswL2DevCtrlDefaultGateway | read-write | current | This object indicates system default gateway. |
| 1.3.6.1.4.1.171.11.36.2.5.2.5 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which Vlan includes system ip. And the Vlan should have been created. |
| 1.3.6.1.4.1.171.11.36.2.5.2.6 | ScalarswL2DevCtrlStpState | read-write | current | This object can be enabled or disabled spanning tree algorithm during runtime of the system. |
| 1.3.6.1.4.1.171.11.36.2.5.2.7 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled . |
| 1.3.6.1.4.1.171.11.36.2.5.2.8 | ScalarswL2DevCtrlBcastStormCtrl | read-write | current | This object indicates broadcast storm control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail about the storm co… |
| 1.3.6.1.4.1.171.11.36.2.5.2.9 | ScalarswL2DevCtrlMcastStormCtrl | read-write | current | This object indicates multicast storm control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail about the storm co… |
| 1.3.6.1.4.1.171.11.36.2.5.2.10 | ScalarswL2DevCtrlDestLookupFailureCtrl | read-write | current | This object indicates destination lookup failure rate control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail ab… |
| 1.3.6.1.4.1.171.11.36.2.5.2.11 | ScalarswL2DevCtrlBMDStormLimit | read-write | current | This object to decide how many broadcast/multicast (depend on swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or swL2DevCtrlDestLookupFailureCtrlobjects w… |
| 1.3.6.1.4.1.171.11.36.2.5.2.12 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. |
| 1.3.6.1.4.1.171.11.36.2.5.2.13 | ScalarswL2DevCtrlSnmpEnableAuthenTraps | read-write | current | Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as su… |
| 1.3.6.1.4.1.171.11.36.2.5.2.14 | ScalarswL2DevCtrlFilterEAPOLPDU | read-write | current | Indicates whether to filter the EAPOL PDU. If the administrative state for Port Access Control in a System is enabled, this object is meaningless. Otherwise, w… |
| 1.3.6.1.4.1.171.11.36.2.5.2.15 | ScalarswL2DevCtrlTrafficSegmentation | read-write | current | If this object is disabled(2), then no traffic segmentation. When we set it to enabled(1), there are three conditions for the traffic segmentation. (1) If with… |
| 1.3.6.1.4.1.171.11.36.2.5.2.16 | NodeagentPingTest | |||
| 1.3.6.1.4.1.171.11.36.2.5.2.16.1 | ScalaragentPingTestIPAddress | read-write | current | The target ip address of the ping test |
| 1.3.6.1.4.1.171.11.36.2.5.2.16.2 | ScalaragentPingTestRepetition | read-write | current | The repetition times of the ping test |
| 1.3.6.1.4.1.171.11.36.2.5.2.16.3 | ScalaragentPingTestControl | read-write | current | To control the device to start ping or stop ping |
| 1.3.6.1.4.1.171.11.36.2.5.2.16.4 | ScalaragentPingTestStatus | read-only | current | The state of the ping test, proceeding means the ping test is going on, and finish means the ping test is finished |
| 1.3.6.1.4.1.171.11.36.2.5.2.16.5 | ScalaragentPingTestSuccessCount | read-only | current | The success times of the ping test. |
| 1.3.6.1.4.1.171.11.36.2.5.2.16.6 | ScalaragentPingTestFailCount | read-only | current | The fail times of the ping test. |
| 1.3.6.1.4.1.171.11.36.2.5.2.17 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system . |
| 1.3.6.1.4.1.171.11.36.2.6 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.6.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.36.2.6.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.36.2.6.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.36.2.6.1.1.2 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.36.2.6.1.1.3 | ColumnswL2PortInfoDescr | read-only | current | Provides port type information in displayed string format |
| 1.3.6.1.4.1.171.11.36.2.6.1.1.4 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.36.2.6.1.1.5 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.36.2.6.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port of the device. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.2 | ColumnswL2PortCtrlAdminState | read-write | current | This object decide the port enabled or disabled. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.3 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.4 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | Set flow control function as enabled or disabled. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.5 | ColumnswL2PortCtrlCleanStatCounter | read-write | current | As the object is set to active, the statistic counters of this port will be cleared. If set to normal, do nothing. |
| 1.3.6.1.4.1.171.11.36.2.6.2.1.6 | ColumnswL2PortCtrlDescription | read-write | current | Set port description in displayed string format. |
| 1.3.6.1.4.1.171.11.36.2.7 | NodeswL2DiffServMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.7.1 | TableswL2DiffServTypeCtrlTable | not-accessible | current | A table that contains Differentiated Service(DiffServ) type information of each port. |
| 1.3.6.1.4.1.171.11.36.2.7.1.1 | RowswL2DiffServTypeCtrlEntry | not-accessible | current | A list of DiffServ type information for each port of the device. |
| 1.3.6.1.4.1.171.11.36.2.7.1.1.1 | ColumnswL2DiffServTypeCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.36.2.7.1.1.2 | ColumnswL2DiffServTypeCtrlDiffServType | read-write | current | The DiffServ type of this port. disabled(1) dscp(2) swL2DiffServDSCPCtrlTable will take effect for the replacement of DSCP(DiffServ codepoint) field. tos(3) sw… |
| 1.3.6.1.4.1.171.11.36.2.7.2 | TableswL2DiffServDSCPCtrlTable | not-accessible | current | A table that contains DSCP (Differentiated Service Code Point) control information. |
| 1.3.6.1.4.1.171.11.36.2.7.2.1 | RowswL2DiffServDSCPCtrlEntry | not-accessible | current | A list of DSCP control information for each port. |
| 1.3.6.1.4.1.171.11.36.2.7.2.1.1 | ColumnswL2DiffServDSCPCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.36.2.7.2.1.2 | ColumnswL2DiffServDSCPCtrlMode | read-write | current | The DSCP mode of this port. dscp-Force-Overwrite(1) value regardless of the DSCP of the incoming packet. dscp-Change-If-Zero(2) value if the DSCP of the incomi… |
| 1.3.6.1.4.1.171.11.36.2.7.2.1.3 | ColumnswL2DiffServDSCPCtrlValue | read-write | current | The DSCP value of this port. |
| 1.3.6.1.4.1.171.11.36.2.7.3 | TableswL2DiffServTOSCtrlTable | not-accessible | current | A table that contains TOS (Type Of Service) control information. |
| 1.3.6.1.4.1.171.11.36.2.7.3.1 | RowswL2DiffServTOSCtrlEntry | not-accessible | current | A list of TOS control information for each port. |
| 1.3.6.1.4.1.171.11.36.2.7.3.1.1 | ColumnswL2DiffServTOSCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.36.2.7.3.1.2 | ColumnswL2DiffServTOSCtrlMode | read-write | current | The TOS mode of this port. tos-Force-Overwrite(1) tos-TOS-Overwrite-802dot1p(2) tag control priority field to the value in IP TOS precedence field. tos-802dot1… |
| 1.3.6.1.4.1.171.11.36.2.7.3.1.3 | ColumnswL2DiffServTOSCtrlValue | read-write | current | this object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1) |
| 1.3.6.1.4.1.171.11.36.2.8 | NodeswL2PortMirrorMgmt | |||
| 1.3.6.1.4.1.171.11.36.2.8.1 | TableswL2PortMirrorSrcPortTable | not-accessible | current | A list of port snooping entries.Port mirroring function provides an easy way to monitor traffic on any port. In this way any good packets appears on the source… |
| 1.3.6.1.4.1.171.11.36.2.8.1.1 | RowswL2PortMirrorSrcPortEntry | not-accessible | current | A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set… |
| 1.3.6.1.4.1.171.11.36.2.8.1.1.1 | ColumnswL2PortMirrorIndex | read-only | current | This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. |
| 1.3.6.1.4.1.171.11.36.2.8.1.1.2 | ColumnswL2PortMirrorDirection | read-write | current | This object uses to setup what packets will be mirrored. |
| 1.3.6.1.4.1.171.11.36.2.8.2 | ScalarswL2PortMirrorTargetPort | read-write | current | This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the seq… |
| 1.3.6.1.4.1.171.11.36.2.8.3 | ScalarswL2PortMirrorState | read-write | current | This object indicates the mirror status. |