DIAL-CONTROL-MIB
90 objects
The MIB module to describe peer information for demand access and possibly other kinds of interfaces.
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex ifOperStatus InterfaceIndex InterfaceIndexOrZero |
| RFC1213-MIB | transmission |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.21 | IdentitydialControlMib | The MIB module to describe peer information for demand access and possibly other kinds of interfaces. | ||
| 1.3.6.1.2.1.10.21.1 | NodedialControlMibObjects | |||
| 1.3.6.1.2.1.10.21.1.1 | NodedialCtlConfiguration | |||
| 1.3.6.1.2.1.10.21.1.1.1 | ScalardialCtlAcceptMode | read-write | current | The security level for acceptance of incoming calls. acceptNone(1) - incoming calls will not be accepted acceptAll(2) - incoming calls will be accepted, even i… |
| 1.3.6.1.2.1.10.21.1.1.2 | ScalardialCtlTrapEnable | read-write | current | This object indicates whether dialCtlPeerCallInformation and dialCtlPeerCallSetup traps should be generated for all peers. If the value of this object is enabl… |
| 1.3.6.1.2.1.10.21.1.2 | NodedialCtlPeer | |||
| 1.3.6.1.2.1.10.21.1.2.1 | TabledialCtlPeerCfgTable | not-accessible | current | The list of peers from which the managed device will accept calls or to which it will place them. |
| 1.3.6.1.2.1.10.21.1.2.1.1 | RowdialCtlPeerCfgEntry | not-accessible | current | Configuration data for a single Peer. This entry is effectively permanent, and contains information to identify the peer, how to connect to the peer, how to id… |
| 1.3.6.1.2.1.10.21.1.2.1.1.1 | ColumndialCtlPeerCfgId | not-accessible | current | This object identifies a single peer. There may be several entries in this table for one peer, defining different ways of reaching this peer. Thus, there may b… |
| 1.3.6.1.2.1.10.21.1.2.1.1.2 | ColumndialCtlPeerCfgIfType | read-create | current | The interface type to be used for calling this peer. In case of ISDN, the value of isdn(63) is to be used. |
| 1.3.6.1.2.1.10.21.1.2.1.1.3 | ColumndialCtlPeerCfgLowerIf | read-create | current | ifIndex value of an interface the peer will have to be called on. For example, on an ISDN interface, this can be the ifIndex value of a D channel or the ifInde… |
| 1.3.6.1.2.1.10.21.1.2.1.1.4 | ColumndialCtlPeerCfgOriginateAddress | read-create | current | Call Address at which the peer will be called. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channel call requ… |
| 1.3.6.1.2.1.10.21.1.2.1.1.5 | ColumndialCtlPeerCfgAnswerAddress | read-create | current | Calling Party Number information element, as for example passed in an ISDN SETUP message by a PBX or switch, for incoming calls. This address can be used to id… |
| 1.3.6.1.2.1.10.21.1.2.1.1.6 | ColumndialCtlPeerCfgSubAddress | read-create | current | Subaddress at which the peer will be called. If the subaddress is undefined for the given media or unused, this is a zero length string. |
| 1.3.6.1.2.1.10.21.1.2.1.1.7 | ColumndialCtlPeerCfgClosedUserGroup | read-create | current | Closed User Group at which the peer will be called. If the Closed User Group is undefined for the given media or unused, this is a zero length string. |
| 1.3.6.1.2.1.10.21.1.2.1.1.8 | ColumndialCtlPeerCfgSpeed | read-create | current | The desired information transfer speed in bits/second when calling this peer. The detailed media specific information, e.g. information type and information tr… |
| 1.3.6.1.2.1.10.21.1.2.1.1.9 | ColumndialCtlPeerCfgInfoType | read-create | current | The Information Transfer Capability to be used when calling this peer. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to dat… |
| 1.3.6.1.2.1.10.21.1.2.1.1.10 | ColumndialCtlPeerCfgPermission | read-create | current | Applicable permissions. callback(4) either rejects the call and then calls back, or uses the 'Reverse charging' information element if it is available. Note th… |
| 1.3.6.1.2.1.10.21.1.2.1.1.11 | ColumndialCtlPeerCfgInactivityTimer | read-create | current | The connection will be automatically disconnected if no longer carrying useful data for a time period, in seconds, specified in this object. Useful data in thi… |
| 1.3.6.1.2.1.10.21.1.2.1.1.12 | ColumndialCtlPeerCfgMinDuration | read-create | current | Minimum duration of a call in seconds, starting from the time the call is connected until the call is disconnected. This is to accomplish the fact that in most… |
| 1.3.6.1.2.1.10.21.1.2.1.1.13 | ColumndialCtlPeerCfgMaxDuration | read-create | current | Maximum call duration in seconds. Zero means 'unlimited'. |
| 1.3.6.1.2.1.10.21.1.2.1.1.14 | ColumndialCtlPeerCfgCarrierDelay | read-create | current | The call timeout time in seconds. The default value of zero means that the call timeout as specified for the media in question will apply. |
| 1.3.6.1.2.1.10.21.1.2.1.1.15 | ColumndialCtlPeerCfgCallRetries | read-create | current | The number of calls to a non-responding address that may be made. A retry count of zero means there is no bound. The intent is to bound the number of successiv… |
| 1.3.6.1.2.1.10.21.1.2.1.1.16 | ColumndialCtlPeerCfgRetryDelay | read-create | current | The time in seconds between call retries if a peer cannot be reached. A value of zero means that call retries may be done without any delay. |
| 1.3.6.1.2.1.10.21.1.2.1.1.17 | ColumndialCtlPeerCfgFailureDelay | read-create | current | The time in seconds after which call attempts are to be placed again after a peer has been noticed to be unreachable, i.e. after dialCtlPeerCfgCallRetries unsu… |
| 1.3.6.1.2.1.10.21.1.2.1.1.18 | ColumndialCtlPeerCfgTrapEnable | read-create | current | This object indicates whether dialCtlPeerCallInformation and dialCtlPeerCallSetup traps should be generated for this peer. |
| 1.3.6.1.2.1.10.21.1.2.1.1.19 | ColumndialCtlPeerCfgStatus | read-create | current | Status of one row in this table. |
| 1.3.6.1.2.1.10.21.1.2.2 | TabledialCtlPeerStatsTable | not-accessible | current | Statistics information for each peer entry. There will be one entry in this table for each entry in the dialCtlPeerCfgTable. |
| 1.3.6.1.2.1.10.21.1.2.2.1 | RowdialCtlPeerStatsEntry | not-accessible | current | Statistics information for a single Peer. This entry is effectively permanent, and contains information describing the last call attempt as well as supplying s… |
| 1.3.6.1.2.1.10.21.1.2.2.1.1 | ColumndialCtlPeerStatsConnectTime | read-only | current | Accumulated connect time to the peer since system startup. This is the total connect time, i.e. the connect time for outgoing calls plus the time for incoming … |
| 1.3.6.1.2.1.10.21.1.2.2.1.2 | ColumndialCtlPeerStatsChargedUnits | read-only | current | The total number of charging units applying to this peer since system startup. Only the charging units applying to the local interface, i.e. for originated cal… |
| 1.3.6.1.2.1.10.21.1.2.2.1.3 | ColumndialCtlPeerStatsSuccessCalls | read-only | current | Number of completed calls to this peer. |
| 1.3.6.1.2.1.10.21.1.2.2.1.4 | ColumndialCtlPeerStatsFailCalls | read-only | current | Number of failed call attempts to this peer since system startup. |
| 1.3.6.1.2.1.10.21.1.2.2.1.5 | ColumndialCtlPeerStatsAcceptCalls | read-only | current | Number of calls from this peer accepted since system startup. |
| 1.3.6.1.2.1.10.21.1.2.2.1.6 | ColumndialCtlPeerStatsRefuseCalls | read-only | current | Number of calls from this peer refused since system startup. |
| 1.3.6.1.2.1.10.21.1.2.2.1.7 | ColumndialCtlPeerStatsLastDisconnectCause | read-only | current | The encoded network cause value associated with the last call. This object will be updated whenever a call is started or cleared. The value of this object will… |
| 1.3.6.1.2.1.10.21.1.2.2.1.8 | ColumndialCtlPeerStatsLastDisconnectText | read-only | current | ASCII text describing the reason for the last call termination. This object exists because it would be impossible for a management station to store all possibl… |
| 1.3.6.1.2.1.10.21.1.2.2.1.9 | ColumndialCtlPeerStatsLastSetupTime | read-only | current | The value of sysUpTime when the last call to this peer was started. For ISDN media, this will be the time when the setup message was received from or sent to t… |
| 1.3.6.1.2.1.10.21.1.3 | NodecallActive | |||
| 1.3.6.1.2.1.10.21.1.3.1 | TablecallActiveTable | not-accessible | current | A table containing information about active calls to a specific destination. |
| 1.3.6.1.2.1.10.21.1.3.1.1 | RowcallActiveEntry | not-accessible | current | The information regarding a single active Connection. An entry in this table will be created when a call is started. An entry in this table will be deleted whe… |
| 1.3.6.1.2.1.10.21.1.3.1.1.1 | ColumncallActiveSetupTime | not-accessible | current | The value of sysUpTime when the call associated to this entry was started. This will be useful for an NMS to retrieve all calls after a specific time. Also, th… |
| 1.3.6.1.2.1.10.21.1.3.1.1.2 | ColumncallActiveIndex | not-accessible | current | Small index variable to distinguish calls that start in the same hundredth of a second. |
| 1.3.6.1.2.1.10.21.1.3.1.1.3 | ColumncallActivePeerAddress | read-only | current | The number this call is connected to. If the number is not available, then it will have a length of zero. |
| 1.3.6.1.2.1.10.21.1.3.1.1.4 | ColumncallActivePeerSubAddress | read-only | current | The subaddress this call is connected to. If the subaddress is undefined or not available, this will be a zero length string. |
| 1.3.6.1.2.1.10.21.1.3.1.1.5 | ColumncallActivePeerId | read-only | current | This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this o… |
| 1.3.6.1.2.1.10.21.1.3.1.1.6 | ColumncallActivePeerIfIndex | read-only | current | This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of t… |
| 1.3.6.1.2.1.10.21.1.3.1.1.7 | ColumncallActiveLogicalIfIndex | read-only | current | This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used … |
| 1.3.6.1.2.1.10.21.1.3.1.1.8 | ColumncallActiveConnectTime | read-only | current | The value of sysUpTime when the call was connected. If the call is not connected, this object will have a value of zero. |
| 1.3.6.1.2.1.10.21.1.3.1.1.9 | ColumncallActiveCallState | read-only | current | The current call state. unknown(1) - The call state is unknown. connecting(2) - A connection attempt (outgoing call) is being made. connected(3) - An incoming … |
| 1.3.6.1.2.1.10.21.1.3.1.1.10 | ColumncallActiveCallOrigin | read-only | current | The call origin. |
| 1.3.6.1.2.1.10.21.1.3.1.1.11 | ColumncallActiveChargedUnits | read-only | current | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.2.1.10.21.1.3.1.1.12 | ColumncallActiveInfoType | read-only | current | The information type for this call. |
| 1.3.6.1.2.1.10.21.1.3.1.1.13 | ColumncallActiveTransmitPackets | read-only | current | The number of packets which were transmitted for this call. |
| 1.3.6.1.2.1.10.21.1.3.1.1.14 | ColumncallActiveTransmitBytes | read-only | current | The number of bytes which were transmitted for this call. |
| 1.3.6.1.2.1.10.21.1.3.1.1.15 | ColumncallActiveReceivePackets | read-only | current | The number of packets which were received for this call. |
| 1.3.6.1.2.1.10.21.1.3.1.1.16 | ColumncallActiveReceiveBytes | read-only | current | The number of bytes which were received for this call. |
| 1.3.6.1.2.1.10.21.1.4 | NodecallHistory | |||
| 1.3.6.1.2.1.10.21.1.4.1 | ScalarcallHistoryTableMaxLength | read-write | current | The upper limit on the number of entries that the callHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is f… |
| 1.3.6.1.2.1.10.21.1.4.2 | ScalarcallHistoryRetainTimer | read-write | current | The minimum amount of time that an callHistoryEntry will be maintained before being deleted. A value of 0 will prevent any history from being retained in the c… |
| 1.3.6.1.2.1.10.21.1.4.3 | TablecallHistoryTable | not-accessible | current | A table containing information about specific calls to a specific destination. |
| 1.3.6.1.2.1.10.21.1.4.3.1 | RowcallHistoryEntry | not-accessible | current | The information regarding a single Connection. |
| 1.3.6.1.2.1.10.21.1.4.3.1.1 | ColumncallHistoryPeerAddress | read-only | current | The number this call was connected to. If the number is not available, then it will have a length of zero. |
| 1.3.6.1.2.1.10.21.1.4.3.1.2 | ColumncallHistoryPeerSubAddress | read-only | current | The subaddress this call was connected to. If the subaddress is undefined or not available, this will be a zero length string. |
| 1.3.6.1.2.1.10.21.1.4.3.1.3 | ColumncallHistoryPeerId | read-only | current | This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be … |
| 1.3.6.1.2.1.10.21.1.4.3.1.4 | ColumncallHistoryPeerIfIndex | read-only | current | This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object wil… |
| 1.3.6.1.2.1.10.21.1.4.3.1.5 | ColumncallHistoryLogicalIfIndex | read-only | current | This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used … |
| 1.3.6.1.2.1.10.21.1.4.3.1.6 | ColumncallHistoryDisconnectCause | read-only | current | The encoded network cause value associated with this call. The value of this object will depend on the interface type as well as on the protocol and protocol v… |
| 1.3.6.1.2.1.10.21.1.4.3.1.7 | ColumncallHistoryDisconnectText | read-only | current | ASCII text describing the reason for call termination. This object exists because it would be impossible for a management station to store all possible cause v… |
| 1.3.6.1.2.1.10.21.1.4.3.1.8 | ColumncallHistoryConnectTime | read-only | current | The value of sysUpTime when the call was connected. |
| 1.3.6.1.2.1.10.21.1.4.3.1.9 | ColumncallHistoryDisconnectTime | read-only | current | The value of sysUpTime when the call was disconnected. |
| 1.3.6.1.2.1.10.21.1.4.3.1.10 | ColumncallHistoryCallOrigin | read-only | current | The call origin. |
| 1.3.6.1.2.1.10.21.1.4.3.1.11 | ColumncallHistoryChargedUnits | read-only | current | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.2.1.10.21.1.4.3.1.12 | ColumncallHistoryInfoType | read-only | current | The information type for this call. |
| 1.3.6.1.2.1.10.21.1.4.3.1.13 | ColumncallHistoryTransmitPackets | read-only | current | The number of packets which were transmitted while this call was active. |
| 1.3.6.1.2.1.10.21.1.4.3.1.14 | ColumncallHistoryTransmitBytes | read-only | current | The number of bytes which were transmitted while this call was active. |
| 1.3.6.1.2.1.10.21.1.4.3.1.15 | ColumncallHistoryReceivePackets | read-only | current | The number of packets which were received while this call was active. |
| 1.3.6.1.2.1.10.21.1.4.3.1.16 | ColumncallHistoryReceiveBytes | read-only | current | The number of bytes which were received while this call was active. |
| 1.3.6.1.2.1.10.21.2 | NodedialControlMibTrapPrefix | |||
| 1.3.6.1.2.1.10.21.2.0 | NodedialControlMibTraps | |||
| 1.3.6.1.2.1.10.21.2.0.1 | NotificationdialCtlPeerCallInformation | current | This trap/inform is sent to the manager whenever a successful call clears, or a failed call attempt is determined to have ultimately failed. In the event that … | |
| 1.3.6.1.2.1.10.21.2.0.2 | NotificationdialCtlPeerCallSetup | current | This trap/inform is sent to the manager whenever a call setup message is received or sent. ifOperStatus will return the operational status of the virtual inter… | |
| 1.3.6.1.2.1.10.21.3 | NodedialControlMibConformance | |||
| 1.3.6.1.2.1.10.21.3.1 | NodedialControlMibCompliances | |||
| 1.3.6.1.2.1.10.21.3.1.1 | CompliancedialControlMibCompliance | current | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.2.1.10.21.3.2 | NodedialControlMibGroups | |||
| 1.3.6.1.2.1.10.21.3.2.1 | GroupdialControlGroup | current | A collection of objects providing the DIAL CONTROL capability. | |
| 1.3.6.1.2.1.10.21.3.2.2 | GroupcallActiveGroup | current | A collection of objects providing the active call capability. | |
| 1.3.6.1.2.1.10.21.3.2.3 | GroupcallHistoryGroup | current | A collection of objects providing the Call History capability. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AbsoluteCounter32 | Gauge32 | current | Represents a Counter32-like value that starts at zero, does not decrease, and does not wrap. This may be used only in situations where wrapping is not possible or extremely unlikely. Should such a counter overflow, it l… |