DKSF-253-6-X-A-X
34 objects
MIB for NetPing remote sensing and control
Imported Objects
| RFC1155-SMI | enterprises |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25728 | Nodelightcom | |||
| 1.3.6.1.4.1.25728.253 | IdentitynetPing | MIB for NetPing remote sensing and control | ||
| 1.3.6.1.4.1.25728.911 | NodenpReboot | |||
| 1.3.6.1.4.1.25728.911.1 | ScalarnpSoftReboot | read-write | current | Write 1 to reboot device after current operations completition |
| 1.3.6.1.4.1.25728.911.2 | ScalarnpResetStack | read-write | current | Write 1 to re-initialize network stack |
| 1.3.6.1.4.1.25728.911.3 | ScalarnpForcedReboot | read-write | current | Write 1 to immediate forced reboot |
| 1.3.6.1.4.1.25728.8900 | NodenpIo | |||
| 1.3.6.1.4.1.25728.8900.1 | TablenpIoTable | not-accessible | current | Digital Input/output Table |
| 1.3.6.1.4.1.25728.8900.1.1 | RownpIoEntry | not-accessible | current | Digital Input/output Table Row |
| 1.3.6.1.4.1.25728.8900.1.1.1 | ColumnnpIoLineN | read-only | current | Number of IO line, from 1 to max supported |
| 1.3.6.1.4.1.25728.8900.1.1.2 | ColumnnpIoLevelIn | read-only | current | Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.1.1.3 | ColumnnpIoLevelOut | read-write | current | Output level, 0 or 1. Write -1 to flip output. |
| 1.3.6.1.4.1.25728.8900.1.1.6 | ColumnnpIoMemo | read-only | current | IO line memo |
| 1.3.6.1.4.1.25728.8900.1.1.9 | ColumnnpIoPulseCounter | read-write | current | Pulse Counter (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8900.1.1.12 | ColumnnpIoSinglePulseDuration | read-write | current | Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms |
| 1.3.6.1.4.1.25728.8900.1.1.13 | ColumnnpIoSinglePulseStart | read-write | current | Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration |
| 1.3.6.1.4.1.25728.8900.2 | NodenpIoTraps | |||
| 1.3.6.1.4.1.25728.8900.2.0 | NodenpIoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8900.2.0.1 | NotificationnpIoTrap | current | Input state of IO line is changed | |
| 1.3.6.1.4.1.25728.8900.2.1 | ScalarnpIoTrapLineN | read-only | current | Trap data, Number of IO line |
| 1.3.6.1.4.1.25728.8900.2.2 | ScalarnpIoTrapLevelIn | read-only | current | Trap data, new Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.6 | ScalarnpIoTrapMemo | read-only | current | Trap data, IO line memo |
| 1.3.6.1.4.1.25728.8900.2.21 | ScalarnpIoTrapLevelIn1 | read-only | current | Trap data, current Input level Line 1, value 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.22 | ScalarnpIoTrapLevelIn2 | read-only | current | Trap data, current Input level Line 2, value 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.23 | ScalarnpIoTrapLevelIn3 | read-only | current | Trap data, current Input level Line 3, value 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.24 | ScalarnpIoTrapLevelIn4 | read-only | current | Trap data, current Input level Line 4, value 0 or 1 |
| 1.3.6.1.4.1.25728.9700 | NodenpElecMeter | |||
| 1.3.6.1.4.1.25728.9700.1 | TablenpElecTable | not-accessible | current | Electricity Meter Table |
| 1.3.6.1.4.1.25728.9700.1.1 | RownpElecEntry | not-accessible | current | Electricity Meter Table Table Row |
| 1.3.6.1.4.1.25728.9700.1.1.1 | ColumnnpElecIndex | read-only | current | Number of elec.meter, associated with IO line |
| 1.3.6.1.4.1.25728.9700.1.1.2 | ColumnnpElecPulsesPerKwh | read-write | current | Pulses on IO line input per 1 kWh of consumed energy |
| 1.3.6.1.4.1.25728.9700.1.1.3 | ColumnnpElecPower | read-only | current | Power, Watts, based on pulse rate/interval, 5 minute average |
| 1.3.6.1.4.1.25728.9700.1.1.4 | ColumnnpElecEnergy | read-write | current | Energy counter, kWh, based on pulse count |
| 1.3.6.1.4.1.25728.9700.1.1.5 | ColumnnpElecEnergy100 | read-write | current | Energy counter, kWh*100, based on pulse count |