DKSF-50-11-X-X-X
85 objects
Generic MIB for NetPing remote sensing and control
Imported Objects
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25728 | Nodelightcom | |||
| 1.3.6.1.4.1.25728.50 | IdentitynetPing | Generic MIB for NetPing remote sensing and control | ||
| 1.3.6.1.4.1.25728.90 | NodenpTrapInfo | |||
| 1.3.6.1.4.1.25728.90.1 | ScalarnpTrapEmailTo | read-only | current | user-specified e-mail for NetPing Trap Forwarding Service |
| 1.3.6.1.4.1.25728.911 | NodenpReboot | |||
| 1.3.6.1.4.1.25728.911.1 | ScalarnpSoftReboot | read-write | current | Write 1 to reboot device after current operations completition |
| 1.3.6.1.4.1.25728.911.2 | ScalarnpResetStack | read-write | current | Write 1 to re-initialize network stack |
| 1.3.6.1.4.1.25728.911.3 | ScalarnpForcedReboot | read-write | current | Write 1 to immediate forced reboot |
| 1.3.6.1.4.1.25728.5800 | NodenpPwr | |||
| 1.3.6.1.4.1.25728.5800.3 | TablenpPwrTable | not-accessible | current | Watchdog and outlet/relay control table |
| 1.3.6.1.4.1.25728.5800.3.1 | RownpPwrEntry | not-accessible | current | Watchdog and outlet/relay control table row |
| 1.3.6.1.4.1.25728.5800.3.1.1 | ColumnnpPwrChannelN | read-only | current | The id of watchdog/power channel |
| 1.3.6.1.4.1.25728.5800.3.1.2 | ColumnnpPwrStartReset | read-write | current | Write 1 to start reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active |
| 1.3.6.1.4.1.25728.5800.3.1.3 | ColumnnpPwrManualMode | read-write | current | Mode of power channel 0 - manual off 1 - manual on 2 - watchdog |
| 1.3.6.1.4.1.25728.5800.3.1.4 | ColumnnpPwrResetsCounter | read-write | current | Counter of watchdog resets Write 0 to clear. |
| 1.3.6.1.4.1.25728.5800.3.1.5 | ColumnnpPwrRepeatingResetsCounter | read-only | current | Counter of continous failed watchdog resets |
| 1.3.6.1.4.1.25728.5800.3.1.6 | ColumnnpPwrMemo | read-only | current | Watchdog/power channel memo |
| 1.3.6.1.4.1.25728.7900 | NodenpIr | |||
| 1.3.6.1.4.1.25728.7900.1 | NodenpIrCtrl | |||
| 1.3.6.1.4.1.25728.7900.1.1 | ScalarnpIrPlayCmd | read-write | current | Write IR command number to send IR command |
| 1.3.6.1.4.1.25728.7900.1.2 | ScalarnpIrReset | read-write | current | Write 1 to reset IR transiever. After reset, send IR command and check npIrStatus. |
| 1.3.6.1.4.1.25728.7900.1.3 | ScalarnpIrStatus | read-only | current | IR transiever status |
| 1.3.6.1.4.1.25728.8300 | NodenpCurLoop | |||
| 1.3.6.1.4.1.25728.8300.1 | TablenpCurLoopTable | not-accessible | current | Current loop sensors Table |
| 1.3.6.1.4.1.25728.8300.1.1 | RownpCurLoopEntry | not-accessible | current | Current loop sensors Table Row |
| 1.3.6.1.4.1.25728.8300.1.1.1 | ColumnnpCurLoopN | read-only | current | Index of current loop, 1 to max supported |
| 1.3.6.1.4.1.25728.8300.1.1.2 | ColumnnpCurLoopStatus | read-only | current | Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered |
| 1.3.6.1.4.1.25728.8300.1.1.3 | ColumnnpCurLoopI | read-only | current | Loop current, mA |
| 1.3.6.1.4.1.25728.8300.1.1.4 | ColumnnpCurLoopV | read-only | current | Voltage drop on the loop, mV |
| 1.3.6.1.4.1.25728.8300.1.1.5 | ColumnnpCurLoopR | read-only | current | Resistance of the loop, Ohm |
| 1.3.6.1.4.1.25728.8300.1.1.7 | ColumnnpCurLoopPower | read-write | current | Control of loop power 0=Off, 1=On, 2=reset by off/on power |
| 1.3.6.1.4.1.25728.8300.2 | NodenpCurLoopTraps | |||
| 1.3.6.1.4.1.25728.8300.2.0 | NodenpCurLoopTrapPrefix | |||
| 1.3.6.1.4.1.25728.8300.2.0.1 | NotificationnpCurLoopTrap | current | Status of current loop N has changed! | |
| 1.3.6.1.4.1.25728.8300.2.1 | ScalarnpCurLoopTrapN | read-only | current | Index of current loop, which status has changed |
| 1.3.6.1.4.1.25728.8300.2.2 | ScalarnpCurLoopTrapStatus | read-only | current | Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered |
| 1.3.6.1.4.1.25728.8300.2.3 | ScalarnpCurLoopTrapI | read-only | current | Loop current, mA |
| 1.3.6.1.4.1.25728.8300.2.4 | ScalarnpCurLoopTrapV | read-only | current | Voltage drop on the loop, mV |
| 1.3.6.1.4.1.25728.8300.2.5 | ScalarnpCurLoopTrapR | read-only | current | Resistance of the loop, Ohm |
| 1.3.6.1.4.1.25728.8300.2.7 | ScalarnpCurLoopTrapPower | read-write | current | Status of loop power 0=Off, 1=On |
| 1.3.6.1.4.1.25728.8400 | NodenpRelHumidity | |||
| 1.3.6.1.4.1.25728.8400.2 | NodenpRelHumSensor | |||
| 1.3.6.1.4.1.25728.8400.2.2 | ScalarnpRelHumSensorValueH | read-only | current | Relative humidity value, % |
| 1.3.6.1.4.1.25728.8400.2.3 | ScalarnpRelHumSensorStatus | read-only | current | Status of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected |
| 1.3.6.1.4.1.25728.8400.2.4 | ScalarnpRelHumSensorValueT | read-only | current | Sensor temperature, deg.C |
| 1.3.6.1.4.1.25728.8400.2.5 | ScalarnpRelHumSensorStatusH | read-only | current | Status of Relative Humiduty |
| 1.3.6.1.4.1.25728.8400.2.7 | ScalarnpRelHumSafeRangeHigh | read-only | current | Relative Humidity safe range, top margin, %RH |
| 1.3.6.1.4.1.25728.8400.2.8 | ScalarnpRelHumSafeRangeLow | read-only | current | Relative Humidity safe range, bottom margin, %RH |
| 1.3.6.1.4.1.25728.8400.9 | NodenpRelHumTraps | |||
| 1.3.6.1.4.1.25728.8400.9.0 | NodenpRelHumTrapPrefix | |||
| 1.3.6.1.4.1.25728.8400.9.0.1 | NotificationnpRelHumTrap | current | Status of Relative Humidity RH sensor has changed! | |
| 1.3.6.1.4.1.25728.8800 | NodenpThermo | |||
| 1.3.6.1.4.1.25728.8800.1 | TablenpThermoTable | not-accessible | current | Thermo Sensors Table |
| 1.3.6.1.4.1.25728.8800.1.1 | RownpThermoEntry | not-accessible | current | Thermo Sensors Table Row |
| 1.3.6.1.4.1.25728.8800.1.1.1 | ColumnnpThermoSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.1.1.2 | ColumnnpThermoValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.3 | ColumnnpThermoStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.1.1.4 | ColumnnpThermoLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.5 | ColumnnpThermoHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.6 | ColumnnpThermoMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8800.2 | NodenpThermoTraps | |||
| 1.3.6.1.4.1.25728.8800.2.0 | NodenpThermoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8800.2.0.1 | NotificationnpThermoTrap | current | Status of Thermo sensor is changed (crossing of normal temp. range) | |
| 1.3.6.1.4.1.25728.8800.2.1 | ScalarnpThermoTrapSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.2.2 | ScalarnpThermoTrapValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.2.3 | ScalarnpThermoTrapStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.2.4 | ScalarnpThermoTrapLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.5 | ScalarnpThermoTrapHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.6 | ScalarnpThermoTrapMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8900 | NodenpIo | |||
| 1.3.6.1.4.1.25728.8900.1 | TablenpIoTable | not-accessible | current | Digital Input/output Table |
| 1.3.6.1.4.1.25728.8900.1.1 | RownpIoEntry | not-accessible | current | Digital Input/output Table Row |
| 1.3.6.1.4.1.25728.8900.1.1.1 | ColumnnpIoLineN | read-only | current | Number of IO line, from 1 to max supported |
| 1.3.6.1.4.1.25728.8900.1.1.2 | ColumnnpIoLevelIn | read-only | current | Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.1.1.3 | ColumnnpIoLevelOut | read-write | current | Output level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.1.1.6 | ColumnnpIoMemo | read-only | current | IO line memo |
| 1.3.6.1.4.1.25728.8900.1.1.9 | ColumnnpIoPulseCounter | read-write | current | Pulse Counter on IO input line (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8900.1.1.12 | ColumnnpIoSinglePulseDuration | read-write | current | Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms |
| 1.3.6.1.4.1.25728.8900.1.1.13 | ColumnnpIoSinglePulseStart | read-write | current | Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration |
| 1.3.6.1.4.1.25728.8900.2 | NodenpIoTraps | |||
| 1.3.6.1.4.1.25728.8900.2.0 | NodenpIoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8900.2.0.1 | NotificationnpIoTrap | current | Input state of IO line is changed | |
| 1.3.6.1.4.1.25728.8900.2.1 | ScalarnpIoTrapLineN | read-only | current | Trap data, Number of IO line |
| 1.3.6.1.4.1.25728.8900.2.2 | ScalarnpIoTrapLevelIn | read-only | current | Trap data, new Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.6 | ScalarnpIoTrapMemo | read-only | current | Trap data, IO line memo |