DKSF-57-1-X-X-1
149 objects
Generic MIB for NetPing remote sensing and control
Imported Objects
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25728 | Nodelightcom | |||
| 1.3.6.1.4.1.25728.57 | IdentitynetPingV4 | Generic MIB for NetPing remote sensing and control | ||
| 1.3.6.1.4.1.25728.911 | NodenpReboot | |||
| 1.3.6.1.4.1.25728.911.1 | ScalarnpSoftReboot | read-write | current | Write 1 to reboot device after current operations completition |
| 1.3.6.1.4.1.25728.911.2 | ScalarnpResetStack | read-write | current | Write 1 to re-initialize network stack |
| 1.3.6.1.4.1.25728.911.3 | ScalarnpForcedReboot | read-write | current | Write 1 to immediate forced reboot |
| 1.3.6.1.4.1.25728.5500 | NodenpRelay | |||
| 1.3.6.1.4.1.25728.5500.3 | NodenpRelayTrapData | |||
| 1.3.6.1.4.1.25728.5500.3.1 | ScalarnpRelayTrapN | read-only | current | The N of output relay |
| 1.3.6.1.4.1.25728.5500.3.2 | ScalarnpRelayTrapMode | read-write | current | Relay position, w/o effect of temporary switch (reset): 0 - off 1 - on |
| 1.3.6.1.4.1.25728.5500.3.6 | ScalarnpRelayTrapMemo | read-only | current | Relay Memo |
| 1.3.6.1.4.1.25728.5500.3.15 | ScalarnpRelayTrapState | read-only | current | Actual relay state at the moment, 0 - relay is off 1 - relay is on |
| 1.3.6.1.4.1.25728.5500.3.18 | ScalarnpRelayTrapCmdSrc | read-only | current | Source of command to switch Relay |
| 1.3.6.1.4.1.25728.5500.3.19 | ScalarnpRelayTrapDateTime | read-only | current | Textual timestamp of event |
| 1.3.6.1.4.1.25728.5500.5 | TablenpRelayTable | not-accessible | current | Relay control table |
| 1.3.6.1.4.1.25728.5500.5.1 | RownpRelayEntry | not-accessible | current | Relay/outlet table row |
| 1.3.6.1.4.1.25728.5500.5.1.1 | ColumnnpRelayN | read-only | current | The N of output relay |
| 1.3.6.1.4.1.25728.5500.5.1.2 | ColumnnpRelayMode | read-write | current | Control of relay: -1 - flip between on(1) and off(0) 0 - switch off 1 - switch on |
| 1.3.6.1.4.1.25728.5500.5.1.3 | ColumnnpRelayStartReset | read-write | current | Write 1 to start reset (switch relay off for some time) |
| 1.3.6.1.4.1.25728.5500.5.1.6 | ColumnnpRelayMemo | read-only | current | Relay memo |
| 1.3.6.1.4.1.25728.5500.5.1.14 | ColumnnpRelayFlip | read-write | current | Write -1 to flip between manual on and manual off states of relay |
| 1.3.6.1.4.1.25728.5500.5.1.15 | ColumnnpRelayState | read-only | current | Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on |
| 1.3.6.1.4.1.25728.5500.6 | NodenpRelayTrap | |||
| 1.3.6.1.4.1.25728.5500.6.100 | NotificationnpRelayTrapOff | current | Relay switched off | |
| 1.3.6.1.4.1.25728.5500.6.101 | NotificationnpRelayTrapOn | current | Relay switched on | |
| 1.3.6.1.4.1.25728.5500.6.102 | NotificationnpRelayTrapModeChange | current | Relay mode changed | |
| 1.3.6.1.4.1.25728.5500.6.103 | NotificationnpRelayTrapReset | current | Relay reset started | |
| 1.3.6.1.4.1.25728.5500.6.127 | NodenpRelayTrapAllEvents | |||
| 1.3.6.1.4.1.25728.5500.6.127.99 | NotificationnpRelayTrapAllChannels | current | Status of Humidity has changed! | |
| 1.3.6.1.4.1.25728.5800 | NodenpPwrWdog | |||
| 1.3.6.1.4.1.25728.5800.2 | NodenpPwrWdogTrapData | |||
| 1.3.6.1.4.1.25728.5800.2.1 | ScalarnpPwrWdogTrapN | read-only | current | N of Watchdog channel |
| 1.3.6.1.4.1.25728.5800.2.6 | ScalarnpPwrWdogTrapMemo | read-only | current | Watchdog/Relay memo |
| 1.3.6.1.4.1.25728.5800.2.13 | ScalarnpPwrWdogTrapFailBitmap | read-only | current | Failed adresses, bit 0 - A, bit 1 - B, bit 2 - C |
| 1.3.6.1.4.1.25728.5800.3 | TablenpPwrWdogTable | not-accessible | current | Watchdog Control Table |
| 1.3.6.1.4.1.25728.5800.3.1 | RownpPwrWdogEntry | not-accessible | current | Watchdog Control Table Row |
| 1.3.6.1.4.1.25728.5800.3.1.1 | ColumnnpPwrWdogChannelN | read-only | current | The N of watchdog/power channel |
| 1.3.6.1.4.1.25728.5800.3.1.4 | ColumnnpPwrWdogResetsCounter | read-write | current | Counter of watchdog resets Write 0 to clear. |
| 1.3.6.1.4.1.25728.5800.3.1.5 | ColumnnpPwrWdogRepeatingResetsCounter | read-only | current | Counter of continous failed watchdog resets |
| 1.3.6.1.4.1.25728.5800.3.1.6 | ColumnnpPwrWdogMemo | read-only | current | Watchdog channel memo |
| 1.3.6.1.4.1.25728.5800.6 | NodenpPwrWdogTrap | |||
| 1.3.6.1.4.1.25728.5800.6.100 | NotificationnpPwrWdogTrapReset | current | Watchdog reset started | |
| 1.3.6.1.4.1.25728.5800.6.101 | NotificationnpPwrWdogTrapSuspended | current | Watchdog resets suspended because of no effect | |
| 1.3.6.1.4.1.25728.5800.6.102 | NotificationnpPwrWdogTrapResumed | current | Watchdog normal operation resumed, successful ping after resets was suspended | |
| 1.3.6.1.4.1.25728.8400 | NodenpRelHumidity | |||
| 1.3.6.1.4.1.25728.8400.1 | TablenpRelHumTable | not-accessible | current | Humidity+Temperature Sensors Table |
| 1.3.6.1.4.1.25728.8400.1.1 | RownpRelHumEntry | not-accessible | current | Humidity+Temperature Sensors Table Row |
| 1.3.6.1.4.1.25728.8400.1.1.1 | ColumnnpRelHumN | read-only | current | Index of Humidity+Temperature sensor, 1 to max supported |
| 1.3.6.1.4.1.25728.8400.1.1.2 | ColumnnpRelHumValue | read-only | current | Relative humidity value, % |
| 1.3.6.1.4.1.25728.8400.1.1.3 | ColumnnpRelHumStatus | read-only | current | Status of Relative Humiduty |
| 1.3.6.1.4.1.25728.8400.1.1.4 | ColumnnpRelHumTempValue | read-only | current | Sensor temperature, deg.C |
| 1.3.6.1.4.1.25728.8400.1.1.5 | ColumnnpRelHumTempStatus | read-only | current | Status of Relative Humiduty |
| 1.3.6.1.4.1.25728.8400.1.1.6 | ColumnnpRelHumMemo | read-only | current | Sensor Memo/Location |
| 1.3.6.1.4.1.25728.8400.1.1.7 | ColumnnpRelHumSafeRangeHigh | read-only | current | Relative Humidity safe range, top margin, %RH |
| 1.3.6.1.4.1.25728.8400.1.1.8 | ColumnnpRelHumSafeRangeLow | read-only | current | Relative Humidity safe range, bottom margin, %RH |
| 1.3.6.1.4.1.25728.8400.1.1.9 | ColumnnpRelHumTempSafeRangeHigh | read-only | current | Temperature safe range, top margin, deg.C |
| 1.3.6.1.4.1.25728.8400.1.1.10 | ColumnnpRelHumTempSafeRangeLow | read-only | current | Temperature safe range, bottom margin, deg.C |
| 1.3.6.1.4.1.25728.8400.3 | NodenpRelHumTrapData | |||
| 1.3.6.1.4.1.25728.8400.3.1 | ScalarnpRelHumTrapDataN | read-only | current | Index of Humidity+Temperature sensor, 1 to max supported |
| 1.3.6.1.4.1.25728.8400.3.2 | ScalarnpRelHumTrapDataValue | read-only | current | Sensor humidity, %RH, or temperature, deg.C |
| 1.3.6.1.4.1.25728.8400.3.4 | ScalarnpRelHumTrapDataStatus | read-only | current | Status of humidity or temperature |
| 1.3.6.1.4.1.25728.8400.3.6 | ScalarnpRelHumTrapDataMemo | read-only | current | Sensor Memo/Location |
| 1.3.6.1.4.1.25728.8400.3.7 | ScalarnpRelHumTrapDataSafeRangeHigh | read-only | current | Relative Humidity safe range, top margin, %RH or deg.C |
| 1.3.6.1.4.1.25728.8400.3.8 | ScalarnpRelHumTrapDataSafeRangeLow | read-only | current | Relative Humidity safe range, bottom margin, %RH or deg.C |
| 1.3.6.1.4.1.25728.8400.6 | NodenpRelHumTrap | |||
| 1.3.6.1.4.1.25728.8400.6.100 | NotificationnpRelHumTrapFail | current | Rel.Humidity sensor failed! | |
| 1.3.6.1.4.1.25728.8400.6.101 | NotificationnpRelHumTrapBelowSafe | current | Humidity below the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.102 | NotificationnpRelHumTrapSafe | current | Humidity in the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.103 | NotificationnpRelHumTrapAboveSafe | current | Humidity above the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.127 | NodenpRelHumTrapAllEvents | |||
| 1.3.6.1.4.1.25728.8400.6.127.99 | NotificationnpRelHumTrapAllChannels | current | Status of Humidity has changed! | |
| 1.3.6.1.4.1.25728.8400.7 | NodenpRelHumTrapTemp | |||
| 1.3.6.1.4.1.25728.8400.7.100 | NotificationnpRelHumTrapTempFail | current | Sensor failed! | |
| 1.3.6.1.4.1.25728.8400.7.101 | NotificationnpRelHumTrapTempBelowSafe | current | Temperature below the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.102 | NotificationnpRelHumTrapTempSafe | current | Temperature in the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.103 | NotificationnpRelHumTrapTempAboveSafe | current | Temperature above the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.127 | NodenpRelHumTrapTempAllEvents | |||
| 1.3.6.1.4.1.25728.8400.7.127.99 | NotificationnpRelHumTrapTempAllChannels | current | Status of Temperature has changed! | |
| 1.3.6.1.4.1.25728.8800 | NodenpThermo | |||
| 1.3.6.1.4.1.25728.8800.1 | TablenpThermoTable | not-accessible | current | Thermo Sensors Table |
| 1.3.6.1.4.1.25728.8800.1.1 | RownpThermoEntry | not-accessible | current | Thermo Sensors Table Row |
| 1.3.6.1.4.1.25728.8800.1.1.1 | ColumnnpThermoSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.1.1.2 | ColumnnpThermoValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.3 | ColumnnpThermoStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.1.1.4 | ColumnnpThermoLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.5 | ColumnnpThermoHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.6 | ColumnnpThermoMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8800.1.1.7 | ColumnnpThermoValuePrecise | read-only | current | Temperature, deg.C, with fractional part 3 digits after point |
| 1.3.6.1.4.1.25728.8800.2 | NodenpThermoTraps | |||
| 1.3.6.1.4.1.25728.8800.2.0 | NodenpThermoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8800.2.0.1 | NotificationnpThermoTrap | current | Status of Thermo sensor is changed (crossing of normal temp. range) | |
| 1.3.6.1.4.1.25728.8800.2.1 | ScalarnpThermoTrapSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.2.2 | ScalarnpThermoTrapValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.2.3 | ScalarnpThermoTrapStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.2.4 | ScalarnpThermoTrapLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.5 | ScalarnpThermoTrapHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.6 | ScalarnpThermoTrapMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8900 | NodenpIo | |||
| 1.3.6.1.4.1.25728.8900.1 | TablenpIoTable | not-accessible | current | Digital Input/output Table |
| 1.3.6.1.4.1.25728.8900.1.1 | RownpIoEntry | not-accessible | current | Digital Input/output Table Row |
| 1.3.6.1.4.1.25728.8900.1.1.1 | ColumnnpIoLineN | read-only | current | Number of IO line, from 1 to max supported |
| 1.3.6.1.4.1.25728.8900.1.1.2 | ColumnnpIoLevelIn | read-only | current | Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.1.1.3 | ColumnnpIoLevelOut | read-write | current | Output level, 0 or 1. Write -1 to flip output. |
| 1.3.6.1.4.1.25728.8900.1.1.6 | ColumnnpIoMemo | read-only | current | IO line memo |
| 1.3.6.1.4.1.25728.8900.1.1.7 | ColumnnpIoLevelLegend | read-only | current | Legend for current logic level on the IO line |
| 1.3.6.1.4.1.25728.8900.1.1.9 | ColumnnpIoPulseCounter | read-write | current | Pulse Counter on IO input line (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8900.1.1.12 | ColumnnpIoSinglePulseDuration | read-write | current | Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms |
| 1.3.6.1.4.1.25728.8900.1.1.13 | ColumnnpIoSinglePulseStart | read-write | current | Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration |
| 1.3.6.1.4.1.25728.8910 | NodenpIn | |||
| 1.3.6.1.4.1.25728.8910.1 | TablenpInTable | not-accessible | current | Discrete Inputs Table |
| 1.3.6.1.4.1.25728.8910.1.1 | RownpInEntry | not-accessible | current | Discrete Inputs Table Row |
| 1.3.6.1.4.1.25728.8910.1.1.1 | ColumnnpInLineN | read-only | current | Number of the Input, from 1 to max supported |
| 1.3.6.1.4.1.25728.8910.1.1.2 | ColumnnpInLevelIn | read-only | current | Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8910.1.1.6 | ColumnnpInMemo | read-only | current | Input memo |
| 1.3.6.1.4.1.25728.8910.1.1.7 | ColumnnpInLevelLegend | read-only | current | Legend for current logic level on the Input |
| 1.3.6.1.4.1.25728.8910.1.1.9 | ColumnnpInPulseCounter | read-write | current | Pulse Counter on the Input (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8910.2 | NodenpInTraps | |||
| 1.3.6.1.4.1.25728.8910.2.0 | NodenpInTrapPrefix | |||
| 1.3.6.1.4.1.25728.8910.2.0.1 | NotificationnpInTrap | current | Input Level is changed | |
| 1.3.6.1.4.1.25728.8910.2.1 | ScalarnpInTrapLineN | read-only | current | Trap data, Number of the Input |
| 1.3.6.1.4.1.25728.8910.2.2 | ScalarnpInTrapLevelIn | read-only | current | Trap data, new Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8910.2.6 | ScalarnpInTrapMemo | read-only | current | Trap data, Input memo |
| 1.3.6.1.4.1.25728.8910.2.7 | ScalarnpInTrapLevelLegend | read-only | current | Trap data, Legend for current logic level on the Input |
| 1.3.6.1.4.1.25728.8920 | NodenpOut | |||
| 1.3.6.1.4.1.25728.8920.1 | TablenpOutTable | not-accessible | current | Discrete Output Table |
| 1.3.6.1.4.1.25728.8920.1.1 | RownpOutEntry | not-accessible | current | Discrete Output Table Row |
| 1.3.6.1.4.1.25728.8920.1.1.1 | ColumnnpOutLineN | read-only | current | Number of the Output, from 1 to max supported |
| 1.3.6.1.4.1.25728.8920.1.1.3 | ColumnnpOutLevelOut | read-write | current | Output level, 0 or 1. Write -1 to flip output. |
| 1.3.6.1.4.1.25728.8920.1.1.6 | ColumnnpOutMemo | read-only | current | Output line memo |
| 1.3.6.1.4.1.25728.8920.1.1.7 | ColumnnpOutLevelLegend | read-only | current | Legend for current logic level on the Output |
| 1.3.6.1.4.1.25728.8920.1.1.9 | ColumnnpOutPulseCounter | read-write | current | Pulse Counter on the Output line (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8920.1.1.12 | ColumnnpOutSinglePulseDuration | read-write | current | Set duration of single pulse on the Output line, 100ms to 25500ms, min. step is 100ms |
| 1.3.6.1.4.1.25728.8920.1.1.13 | ColumnnpOutSinglePulseStart | read-write | current | Write 1 to start single pulse on the Output. Output will be inverted for time, specified by npOutSinglePulseDuration |
| 1.3.6.1.4.1.25728.8920.2 | NodenpOutTraps | |||
| 1.3.6.1.4.1.25728.8920.2.0 | NodenpOutTrapPrefix | |||
| 1.3.6.1.4.1.25728.8920.2.0.1 | NotificationnpOutTrap | current | Output Level is changed | |
| 1.3.6.1.4.1.25728.8920.2.1 | ScalarnpOutTrapLineN | read-only | current | Trap data, Number of the Output |
| 1.3.6.1.4.1.25728.8920.2.2 | ScalarnpOutTrapLevel | read-only | current | Trap data, Output level, 0 or 1 |
| 1.3.6.1.4.1.25728.8920.2.6 | ScalarnpOutTrapMemo | read-only | current | Trap data, Output Memo |
| 1.3.6.1.4.1.25728.8920.2.7 | ScalarnpOutTrapLevelLegend | read-only | current | Trap data, Legend for current logic level on the Output |
| 1.3.6.1.4.1.25728.9700 | NodenpElecMeter | |||
| 1.3.6.1.4.1.25728.9700.1 | TablenpElecTable | not-accessible | current | Electricity Meter Table |
| 1.3.6.1.4.1.25728.9700.1.1 | RownpElecEntry | not-accessible | current | Electricity Meter Table Table Row |
| 1.3.6.1.4.1.25728.9700.1.1.1 | ColumnnpElecIndex | read-only | current | Number of elec.meter, associated with IO line |
| 1.3.6.1.4.1.25728.9700.1.1.2 | ColumnnpElecPulsesPerKwh | read-write | current | Pulses on IO line input per 1 kWh of consumed energy |
| 1.3.6.1.4.1.25728.9700.1.1.3 | ColumnnpElecPower | read-only | current | Power, Watts, based on pulse rate/interval, 5 minute average |
| 1.3.6.1.4.1.25728.9700.1.1.4 | ColumnnpElecEnergy | read-write | current | Energy counter, kWh, based on pulse count |
| 1.3.6.1.4.1.25728.9700.1.1.5 | ColumnnpElecEnergy100 | read-write | current | Energy counter, kWh*100, based on pulse count |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FixedPoint1000 | INTEGER | current | Fixed-point value as Integer, 3 decimal gigits after point (i.e. value*1000 rounded to Integer) |