DKSF-70-6-X-X-1
134 objects
Generic MIB for NetPing remote sensing and control
Imported Objects
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25728 | Nodelightcom | |||
| 1.3.6.1.4.1.25728.70 | IdentityuniPingServerSolutionV3 | Generic MIB for NetPing remote sensing and control | ||
| 1.3.6.1.4.1.25728.90 | NodenpTrapInfo | |||
| 1.3.6.1.4.1.25728.90.1 | ScalarnpTrapEmailTo | read-only | current | user-specified e-mail for NetPing Trap Forwarding Service |
| 1.3.6.1.4.1.25728.911 | NodenpReboot | |||
| 1.3.6.1.4.1.25728.911.1 | ScalarnpSoftReboot | read-write | current | Write 1 to reboot device after current operations completition |
| 1.3.6.1.4.1.25728.911.2 | ScalarnpResetStack | read-write | current | Write 1 to re-initialize network stack |
| 1.3.6.1.4.1.25728.911.3 | ScalarnpForcedReboot | read-write | current | Write 1 to immediate forced reboot |
| 1.3.6.1.4.1.25728.3800 | NodenpGsm | |||
| 1.3.6.1.4.1.25728.3800.1 | NodenpGsmInfo | |||
| 1.3.6.1.4.1.25728.3800.1.1 | ScalarnpGsmFailed | read-only | current | Firmware's GSM module status |
| 1.3.6.1.4.1.25728.3800.1.2 | ScalarnpGsmRegistration | read-only | current | Status of modem registration in GSM network (AT+CREG? result) |
| 1.3.6.1.4.1.25728.3800.1.3 | ScalarnpGsmStrength | read-only | current | GSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating info |
| 1.3.6.1.4.1.25728.3800.1.9 | ScalarnpGsmSendSmsUtf8 | read-write | current | Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to pr… |
| 1.3.6.1.4.1.25728.3800.1.10 | ScalarnpGsmSendSmsWin1251 | read-write | current | Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to pr… |
| 1.3.6.1.4.1.25728.3800.2 | NodenpGsmTraps | |||
| 1.3.6.1.4.1.25728.3800.2.0 | NodenpGsmTrapPrefix | |||
| 1.3.6.1.4.1.25728.3800.2.0.1 | NotificationnpGsmTrap | current | GSM modem or SMS firmware problems | |
| 1.3.6.1.4.1.25728.5500 | NodenpRelay | |||
| 1.3.6.1.4.1.25728.5500.5 | TablenpRelayTable | not-accessible | current | Watchdog and outlet/relay control table |
| 1.3.6.1.4.1.25728.5500.5.1 | RownpRelayEntry | not-accessible | current | Relay/outlet table row |
| 1.3.6.1.4.1.25728.5500.5.1.1 | ColumnnpRelayN | read-only | current | The N of output relay |
| 1.3.6.1.4.1.25728.5500.5.1.2 | ColumnnpRelayMode | read-write | current | Control of relay: -1 - flip between on(1) and off(0) 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on b… |
| 1.3.6.1.4.1.25728.5500.5.1.3 | ColumnnpRelayStartReset | read-write | current | Write 1 to start reset (switch relay off for some time) |
| 1.3.6.1.4.1.25728.5500.5.1.6 | ColumnnpRelayMemo | read-only | current | Relay memo |
| 1.3.6.1.4.1.25728.5500.5.1.15 | ColumnnpRelayState | read-only | current | Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on |
| 1.3.6.1.4.1.25728.7900 | NodenpIr | |||
| 1.3.6.1.4.1.25728.7900.1 | NodenpIrCtrl | |||
| 1.3.6.1.4.1.25728.7900.1.1 | ScalarnpIrPlayCmd | read-write | current | Write IR command number to send IR command |
| 1.3.6.1.4.1.25728.7900.1.2 | ScalarnpIrReset | read-write | current | Write 1 to reset IR transiever. After reset, send IR command and check npIrStatus. |
| 1.3.6.1.4.1.25728.7900.1.3 | ScalarnpIrStatus | read-only | current | IR transiever status |
| 1.3.6.1.4.1.25728.8200 | NodenpSmoke | |||
| 1.3.6.1.4.1.25728.8200.1 | TablenpSmokeTable | not-accessible | current | Smoke Sensors Table |
| 1.3.6.1.4.1.25728.8200.1.1 | RownpSmokeEntry | not-accessible | current | Smoke Sensors Table Row |
| 1.3.6.1.4.1.25728.8200.1.1.1 | ColumnnpSmokeSensorN | read-only | current | The id of 1Wire Smoke sensor, 1 to 4 |
| 1.3.6.1.4.1.25728.8200.1.1.2 | ColumnnpSmokeStatus | read-only | current | Status of Smoke sensor |
| 1.3.6.1.4.1.25728.8200.1.1.3 | ColumnnpSmokePower | read-write | current | Controls power on Smoke sensor current loop |
| 1.3.6.1.4.1.25728.8200.1.1.4 | ColumnnpSmokeReset | read-write | current | Write 1 to switch off for approx. 10s to reset sensor |
| 1.3.6.1.4.1.25728.8200.1.1.6 | ColumnnpSmokeMemo | read-only | current | Smoke sensor memo |
| 1.3.6.1.4.1.25728.8200.2 | NodenpSmokeTraps | |||
| 1.3.6.1.4.1.25728.8200.2.0 | NodenpSmokeTrapPrefix | |||
| 1.3.6.1.4.1.25728.8200.2.0.1 | NotificationnpSmokeTrap | current | Status of 1W Smoke sensor has changed | |
| 1.3.6.1.4.1.25728.8200.2.1 | ScalarnpSmokeTrapSensorN | read-only | current | The id of 1Wire Smoke sensor, 1 to 4 |
| 1.3.6.1.4.1.25728.8200.2.2 | ScalarnpSmokeTrapStatus | read-only | current | New status of Smoke sensor |
| 1.3.6.1.4.1.25728.8200.2.6 | ScalarnpSmokeTrapMemo | read-only | current | Smoke sensor memo |
| 1.3.6.1.4.1.25728.8300 | NodenpCurLoop | |||
| 1.3.6.1.4.1.25728.8300.1 | TablenpCurLoopTable | not-accessible | current | Current loop sensors Table |
| 1.3.6.1.4.1.25728.8300.1.1 | RownpCurLoopEntry | not-accessible | current | Current loop sensors Table Row |
| 1.3.6.1.4.1.25728.8300.1.1.1 | ColumnnpCurLoopN | read-only | current | Index of current loop, 1 to max supported |
| 1.3.6.1.4.1.25728.8300.1.1.2 | ColumnnpCurLoopStatus | read-only | current | Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered |
| 1.3.6.1.4.1.25728.8300.1.1.3 | ColumnnpCurLoopI | read-only | current | Loop current, mA |
| 1.3.6.1.4.1.25728.8300.1.1.4 | ColumnnpCurLoopV | read-only | current | Voltage drop on the loop, mV |
| 1.3.6.1.4.1.25728.8300.1.1.5 | ColumnnpCurLoopR | read-only | current | Resistance of the loop, Ohm |
| 1.3.6.1.4.1.25728.8300.1.1.7 | ColumnnpCurLoopPower | read-write | current | Control of loop power 0=Off, 1=On, 2=reset by off/on power |
| 1.3.6.1.4.1.25728.8300.2 | NodenpCurLoopTraps | |||
| 1.3.6.1.4.1.25728.8300.2.0 | NodenpCurLoopTrapPrefix | |||
| 1.3.6.1.4.1.25728.8300.2.0.1 | NotificationnpCurLoopTrap | current | Status of current loop N has changed! | |
| 1.3.6.1.4.1.25728.8300.2.1 | ScalarnpCurLoopTrapN | read-only | current | Index of current loop, which status has changed |
| 1.3.6.1.4.1.25728.8300.2.2 | ScalarnpCurLoopTrapStatus | read-only | current | Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered |
| 1.3.6.1.4.1.25728.8300.2.3 | ScalarnpCurLoopTrapI | read-only | current | Loop current, mA |
| 1.3.6.1.4.1.25728.8300.2.4 | ScalarnpCurLoopTrapV | read-only | current | Voltage drop on the loop, mV |
| 1.3.6.1.4.1.25728.8300.2.5 | ScalarnpCurLoopTrapR | read-only | current | Resistance of the loop, Ohm |
| 1.3.6.1.4.1.25728.8300.2.7 | ScalarnpCurLoopTrapPower | read-write | current | Status of loop power 0=Off, 1=On |
| 1.3.6.1.4.1.25728.8400 | NodenpRelHumidity | |||
| 1.3.6.1.4.1.25728.8400.1 | TablenpRelHumTable | not-accessible | current | Humidity+Temperature Sensors Table |
| 1.3.6.1.4.1.25728.8400.1.1 | RownpRelHumEntry | not-accessible | current | Humidity+Temperature Sensors Table Row |
| 1.3.6.1.4.1.25728.8400.1.1.1 | ColumnnpRelHumN | read-only | current | Index of Humidity+Temperature sensor, 1 to max supported |
| 1.3.6.1.4.1.25728.8400.1.1.2 | ColumnnpRelHumValue | read-only | current | Relative humidity value, % |
| 1.3.6.1.4.1.25728.8400.1.1.3 | ColumnnpRelHumStatus | read-only | current | Status of Relative Humiduty |
| 1.3.6.1.4.1.25728.8400.1.1.4 | ColumnnpRelHumTempValue | read-only | current | Sensor temperature, deg.C |
| 1.3.6.1.4.1.25728.8400.1.1.5 | ColumnnpRelHumTempStatus | read-only | current | Status of Relative Humiduty |
| 1.3.6.1.4.1.25728.8400.1.1.6 | ColumnnpRelHumMemo | read-only | current | Sensor Memo/Location |
| 1.3.6.1.4.1.25728.8400.1.1.7 | ColumnnpRelHumSafeRangeHigh | read-only | current | Relative Humidity safe range, top margin, %RH |
| 1.3.6.1.4.1.25728.8400.1.1.8 | ColumnnpRelHumSafeRangeLow | read-only | current | Relative Humidity safe range, bottom margin, %RH |
| 1.3.6.1.4.1.25728.8400.1.1.9 | ColumnnpRelHumTempSafeRangeHigh | read-only | current | Temperature safe range, top margin, deg.C |
| 1.3.6.1.4.1.25728.8400.1.1.10 | ColumnnpRelHumTempSafeRangeLow | read-only | current | Temperature safe range, bottom margin, deg.C |
| 1.3.6.1.4.1.25728.8400.3 | NodenpRelHumTrapData | |||
| 1.3.6.1.4.1.25728.8400.3.1 | ScalarnpRelHumTrapDataN | read-only | current | Index of Humidity+Temperature sensor, 1 to max supported |
| 1.3.6.1.4.1.25728.8400.3.2 | ScalarnpRelHumTrapDataValue | read-only | current | Sensor humidity, %RH, or temperature, deg.C |
| 1.3.6.1.4.1.25728.8400.3.4 | ScalarnpRelHumTrapDataStatus | read-only | current | Status of humidity or temperature |
| 1.3.6.1.4.1.25728.8400.3.6 | ScalarnpRelHumTrapDataMemo | read-only | current | Sensor Memo/Location |
| 1.3.6.1.4.1.25728.8400.3.7 | ScalarnpRelHumTrapDataSafeRangeHigh | read-only | current | Relative Humidity safe range, top margin, %RH or deg.C |
| 1.3.6.1.4.1.25728.8400.3.8 | ScalarnpRelHumTrapDataSafeRangeLow | read-only | current | Relative Humidity safe range, bottom margin, %RH or deg.C |
| 1.3.6.1.4.1.25728.8400.6 | NodenpRelHumTrap | |||
| 1.3.6.1.4.1.25728.8400.6.100 | NotificationnpRelHumTrapFail | current | Rel.Humidity sensor failed! | |
| 1.3.6.1.4.1.25728.8400.6.101 | NotificationnpRelHumTrapBelowSafe | current | Humidity below the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.102 | NotificationnpRelHumTrapSafe | current | Humidity in the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.103 | NotificationnpRelHumTrapAboveSafe | current | Humidity above the Safe range | |
| 1.3.6.1.4.1.25728.8400.6.127 | NodenpRelHumTrapAllEvents | |||
| 1.3.6.1.4.1.25728.8400.6.127.99 | NotificationnpRelHumTrapAllChannels | current | Status of Humidity has changed! | |
| 1.3.6.1.4.1.25728.8400.7 | NodenpRelHumTrapTemp | |||
| 1.3.6.1.4.1.25728.8400.7.100 | NotificationnpRelHumTrapTempFail | current | Sensor failed! | |
| 1.3.6.1.4.1.25728.8400.7.101 | NotificationnpRelHumTrapTempBelowSafe | current | Temperature below the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.102 | NotificationnpRelHumTrapTempSafe | current | Temperature in the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.103 | NotificationnpRelHumTrapTempAboveSafe | current | Temperature above the Safe range | |
| 1.3.6.1.4.1.25728.8400.7.127 | NodenpRelHumTrapTempAllEvents | |||
| 1.3.6.1.4.1.25728.8400.7.127.99 | NotificationnpRelHumTrapTempAllChannels | current | Status of Temperature has changed! | |
| 1.3.6.1.4.1.25728.8800 | NodenpThermo | |||
| 1.3.6.1.4.1.25728.8800.1 | TablenpThermoTable | not-accessible | current | Thermo Sensors Table |
| 1.3.6.1.4.1.25728.8800.1.1 | RownpThermoEntry | not-accessible | current | Thermo Sensors Table Row |
| 1.3.6.1.4.1.25728.8800.1.1.1 | ColumnnpThermoSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.1.1.2 | ColumnnpThermoValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.3 | ColumnnpThermoStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.1.1.4 | ColumnnpThermoLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.5 | ColumnnpThermoHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.1.1.6 | ColumnnpThermoMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8800.1.1.7 | ColumnnpThermoValuePrecise | read-only | current | Temperature, deg.C, with fractional part 3 digits after point |
| 1.3.6.1.4.1.25728.8800.2 | NodenpThermoTraps | |||
| 1.3.6.1.4.1.25728.8800.2.0 | NodenpThermoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8800.2.0.1 | NotificationnpThermoTrap | current | Status of Thermo sensor is changed (crossing of normal temp. range) | |
| 1.3.6.1.4.1.25728.8800.2.1 | ScalarnpThermoTrapSensorN | read-only | current | The id of temperature sensor, 1 to 8 |
| 1.3.6.1.4.1.25728.8800.2.2 | ScalarnpThermoTrapValue | read-only | current | Temperature, deg.C |
| 1.3.6.1.4.1.25728.8800.2.3 | ScalarnpThermoTrapStatus | read-only | current | Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) |
| 1.3.6.1.4.1.25728.8800.2.4 | ScalarnpThermoTrapLow | read-only | current | Bottom margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.5 | ScalarnpThermoTrapHigh | read-only | current | Top margin of normal temperature range, deg.C |
| 1.3.6.1.4.1.25728.8800.2.6 | ScalarnpThermoTrapMemo | read-only | current | T channel memo |
| 1.3.6.1.4.1.25728.8900 | NodenpIo | |||
| 1.3.6.1.4.1.25728.8900.1 | TablenpIoTable | not-accessible | current | Digital Input/output Table |
| 1.3.6.1.4.1.25728.8900.1.1 | RownpIoEntry | not-accessible | current | Digital Input/output Table Row |
| 1.3.6.1.4.1.25728.8900.1.1.1 | ColumnnpIoLineN | read-only | current | Number of IO line, from 1 to max supported |
| 1.3.6.1.4.1.25728.8900.1.1.2 | ColumnnpIoLevelIn | read-only | current | Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.1.1.3 | ColumnnpIoLevelOut | read-write | current | Output level, 0 or 1. Write -1 to flip output. |
| 1.3.6.1.4.1.25728.8900.1.1.6 | ColumnnpIoMemo | read-only | current | IO line memo |
| 1.3.6.1.4.1.25728.8900.1.1.9 | ColumnnpIoPulseCounter | read-write | current | Pulse Counter on IO input line (counts positive fronts) Write 0 to reset. |
| 1.3.6.1.4.1.25728.8900.1.1.12 | ColumnnpIoSinglePulseDuration | read-write | current | Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms |
| 1.3.6.1.4.1.25728.8900.1.1.13 | ColumnnpIoSinglePulseStart | read-write | current | Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration |
| 1.3.6.1.4.1.25728.8900.2 | NodenpIoTraps | |||
| 1.3.6.1.4.1.25728.8900.2.0 | NodenpIoTrapPrefix | |||
| 1.3.6.1.4.1.25728.8900.2.0.1 | NotificationnpIoTrap | current | Input state of IO line is changed | |
| 1.3.6.1.4.1.25728.8900.2.1 | ScalarnpIoTrapLineN | read-only | current | Trap data, Number of IO line |
| 1.3.6.1.4.1.25728.8900.2.2 | ScalarnpIoTrapLevelIn | read-only | current | Trap data, new Input level, 0 or 1 |
| 1.3.6.1.4.1.25728.8900.2.6 | ScalarnpIoTrapMemo | read-only | current | Trap data, IO line memo |
| 1.3.6.1.4.1.25728.8900.2.7 | ScalarnpIoTrapLevelLegend | read-only | current | Legend for current logic level on the IO line |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FixedPoint1000 | INTEGER | current | Fixed-point value as Integer, 3 decimal gigits after point (i.e. value*1000 rounded to Integer) |