MIB Viewer

DKSF-PWR-MIB

216 objects
MIB for NetPing 4PWR-220/SMS, NetPing 8/PWR, NetPing IO
Imported Objects
SNMPv2-MIBsnmpTraps
SNMPv2-SMICounter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.25728Nodelightcom
1.3.6.1.4.1.25728.90NodenpTrapInfo
1.3.6.1.4.1.25728.90.1ScalarnpTrapEmailToread-onlycurrentuser-specified e-mail for NetPing Trap Forwarding Service
1.3.6.1.4.1.25728.544IdentitynetPingPwrMIB for NetPing 4PWR-220/SMS, NetPing 8/PWR, NetPing IO
1.3.6.1.4.1.25728.911NodenpReboot
1.3.6.1.4.1.25728.911.1ScalarnpSoftRebootread-writecurrentWrite 1 to reboot device after current operations completition
1.3.6.1.4.1.25728.911.2ScalarnpResetStackread-writecurrentWrite 1 to re-initialize network stack
1.3.6.1.4.1.25728.911.3ScalarnpForcedRebootread-writecurrentWrite 1 to immediate forced reboot
1.3.6.1.4.1.25728.3800NodenpGsm
1.3.6.1.4.1.25728.3800.1NodenpGsmInfo
1.3.6.1.4.1.25728.3800.1.1ScalarnpGsmFailedread-onlycurrentFirmware's GSM module status
1.3.6.1.4.1.25728.3800.1.2ScalarnpGsmRegistrationread-onlycurrentStatus of modem registration in GSM network (AT+CREG? result)
1.3.6.1.4.1.25728.3800.1.3ScalarnpGsmStrengthread-onlycurrentGSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating info
1.3.6.1.4.1.25728.3800.1.9ScalarnpGsmSendSmsUtf8read-writecurrentSend arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to pr…
1.3.6.1.4.1.25728.3800.1.10ScalarnpGsmSendSmsWin1251read-writecurrentSend arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to pr…
1.3.6.1.4.1.25728.3800.1.11ScalarnpGsmUnparsedRxSmsFromaccessible-for-notifycurrentSource phone of received unparsed (unknown) Sms
1.3.6.1.4.1.25728.3800.1.12ScalarnpGsmUnparsedRxSmsaccessible-for-notifycurrentReceived unparsed Sms with unknown starting word, Encoding Windows-1251
1.3.6.1.4.1.25728.3800.1.13ScalarnpGsmUnparsedRxSmsUtf8accessible-for-notifycurrentReceived unparsed Sms with unknown starting word, Encoding UTF-8
1.3.6.1.4.1.25728.3800.2NodenpGsmTraps
1.3.6.1.4.1.25728.3800.2.0NodenpGsmTrapPrefix
1.3.6.1.4.1.25728.3800.2.0.1NotificationnpGsmTrapcurrentGSM modem or SMS firmware problems
1.3.6.1.4.1.25728.3800.2.0.2NotificationnpGsmTrapUnparsedSmscurrentforwarding of SMS with wrong starting keyword
1.3.6.1.4.1.25728.3900NodenpBattery
1.3.6.1.4.1.25728.3900.1NodenpBatteryInfo
1.3.6.1.4.1.25728.3900.1.1ScalarnpBatteryPokread-onlycurrentPower source
1.3.6.1.4.1.25728.3900.1.2ScalarnpBatteryLevelread-onlycurrentBattery charge, approximate value, in percent. Valid only if npBatteryPok = 0
1.3.6.1.4.1.25728.3900.1.3ScalarnpBatteryChgread-onlycurrentBattery chargeing status. 0 if charging suspended or battery is full, 1 while LiPo fast charging.
1.3.6.1.4.1.25728.3900.2NodenpBatteryTraps
1.3.6.1.4.1.25728.3900.2.0NodenpBatteryTrapPrefix
1.3.6.1.4.1.25728.3900.2.0.1NotificationnpBatteryTrapcurrentStatus of PowerOk has changed!
1.3.6.1.4.1.25728.5500NodenpRelay
1.3.6.1.4.1.25728.5500.3NodenpRelayTrapData
1.3.6.1.4.1.25728.5500.3.1ScalarnpRelayTrapNread-onlycurrentThe N of output relay
1.3.6.1.4.1.25728.5500.3.2ScalarnpRelayTrapModeread-writecurrentRelay position, w/o effect of temporary switch (reset): 0 - off 1 - on
1.3.6.1.4.1.25728.5500.3.6ScalarnpRelayTrapMemoread-onlycurrentRelay memo
1.3.6.1.4.1.25728.5500.3.15ScalarnpRelayTrapStateread-onlycurrentActual relay state at the moment, 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5500.3.18ScalarnpRelayTrapCmdSrcread-onlycurrentSource of command to switch Relay
1.3.6.1.4.1.25728.5500.3.19ScalarnpRelayTrapDateTimeread-onlycurrentTextual timestamp of event
1.3.6.1.4.1.25728.5500.5TablenpRelayTablenot-accessiblecurrentWatchdog and outlet/relay control table
1.3.6.1.4.1.25728.5500.5.1RownpRelayEntrynot-accessiblecurrentRelay/outlet table row
1.3.6.1.4.1.25728.5500.5.1.1ColumnnpRelayNread-onlycurrentThe N of output relay
1.3.6.1.4.1.25728.5500.5.1.2ColumnnpRelayModeread-writecurrentControl of relay: -1 - flip between on(1) and off(0) 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on b…
1.3.6.1.4.1.25728.5500.5.1.3ColumnnpRelayStartResetread-writecurrentWrite 1 to start reset (switch relay off for some time)
1.3.6.1.4.1.25728.5500.5.1.6ColumnnpRelayMemoread-onlycurrentRelay memo
1.3.6.1.4.1.25728.5500.5.1.14ColumnnpRelayFlipread-writecurrentWrite -1 to flip between manual on and manual off states of relay
1.3.6.1.4.1.25728.5500.5.1.15ColumnnpRelayStateread-onlycurrentActual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5500.5.1.16ColumnnpRelayPoweredread-onlycurrentAC presence on output (relay operation check) 0 - no AC on output socket 1 - AC is present on oputput
1.3.6.1.4.1.25728.5500.6NodenpRelayTrap
1.3.6.1.4.1.25728.5500.6.100NotificationnpRelayTrapOffcurrentRelay switched off
1.3.6.1.4.1.25728.5500.6.101NotificationnpRelayTrapOncurrentRelay switched on
1.3.6.1.4.1.25728.5500.6.102NotificationnpRelayTrapModeChangecurrentRelay mode changed
1.3.6.1.4.1.25728.5500.6.103NotificationnpRelayTrapResetcurrentRelay reset started
1.3.6.1.4.1.25728.5500.6.127NodenpRelayTrapAllEvents
1.3.6.1.4.1.25728.5500.6.127.99NotificationnpRelayTrapAllChannelscurrentStatus of Humidity has changed!
1.3.6.1.4.1.25728.5800NodenpPwr
1.3.6.1.4.1.25728.5800.2NodenpPwrWdogTrapData
1.3.6.1.4.1.25728.5800.2.1ScalarnpPwrWdogTrapNread-onlycurrentNo of Watchdog channel / output relay
1.3.6.1.4.1.25728.5800.2.6ScalarnpPwrWdogTrapMemoread-onlycurrentWatchdog/Relay memo
1.3.6.1.4.1.25728.5800.2.13ScalarnpPwrWdogTrapFailBitmapread-onlycurrentFailed adresses, bit 0 - A, bit 1 - B, bit 2 - C
1.3.6.1.4.1.25728.5800.3TablenpPwrTablenot-accessiblecurrentWatchdog and outlet/relay control table
1.3.6.1.4.1.25728.5800.3.1RownpPwrEntrynot-accessiblecurrentWatchdog control table row
1.3.6.1.4.1.25728.5800.3.1.1ColumnnpPwrChannelNread-onlycurrentThe id of watchdog/power channel
1.3.6.1.4.1.25728.5800.3.1.2ColumnnpPwrStartResetread-onlyobsoleteDeprecated in current FW version: Write 1 to start forced reset. On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active or watchdog is in…
1.3.6.1.4.1.25728.5800.3.1.3ColumnnpPwrManualModeread-writecurrentMode of power channel 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - schedule and watchdog 5 - controlled by Logic
1.3.6.1.4.1.25728.5800.3.1.4ColumnnpPwrResetsCounterread-writecurrentCounter of watchdog resets Write 0 to clear.
1.3.6.1.4.1.25728.5800.3.1.5ColumnnpPwrRepeatingResetsCounterread-onlycurrentCounter of continous failed watchdog resets
1.3.6.1.4.1.25728.5800.3.1.6ColumnnpPwrMemoread-onlycurrentWatchdog channel memo
1.3.6.1.4.1.25728.5800.3.1.14ColumnnpPwrRelayFlipread-writecurrentWrite -1 to flip between manual on and manual off states of relay
1.3.6.1.4.1.25728.5800.3.1.15ColumnnpPwrRelayStateread-onlycurrentActual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5800.6NodenpPwrWdogTrap
1.3.6.1.4.1.25728.5800.6.100NotificationnpPwrWdogTrapResetcurrentWatchdog reset started
1.3.6.1.4.1.25728.5800.6.101NotificationnpPwrWdogTrapSuspendedcurrentWatchdog resets suspended because of no effect
1.3.6.1.4.1.25728.5800.6.102NotificationnpPwrWdogTrapResumedcurrentWatchdog normal operation resumed, successful ping after resets was suspended
1.3.6.1.4.1.25728.7900NodenpIr
1.3.6.1.4.1.25728.7900.1NodenpIrCtrl
1.3.6.1.4.1.25728.7900.1.1ScalarnpIrPlayCmdread-writecurrentWrite IR command number to send IR command
1.3.6.1.4.1.25728.7900.1.2ScalarnpIrResetread-writecurrentWrite 1 to reset IR transiever. After reset, send IR command and check npIrStatus.
1.3.6.1.4.1.25728.7900.1.3ScalarnpIrStatusread-onlycurrentIR transiever status
1.3.6.1.4.1.25728.8200NodenpInputAnalog
1.3.6.1.4.1.25728.8200.1TablenpInputAnalogTablenot-accessiblecurrent1Wire Current Loop Adapters Table
1.3.6.1.4.1.25728.8200.1.1RownpInputAnalogEntrynot-accessiblecurrent1Wire Current Loop Adapters Table Row
1.3.6.1.4.1.25728.8200.1.1.1ColumnnpInputAnalogSensorNread-onlycurrentThe id of 1Wire Current Loop Adapter, 1 to 5
1.3.6.1.4.1.25728.8200.1.1.2ColumnnpInputAnalogStatusread-onlycurrentStatus of Current Loop Signal, failure1w = no reply from the adapter on 1wire bus, failureAnalog = signal is beyond it's Working Range, belowSafe, safe, aboveS…
1.3.6.1.4.1.25728.8200.1.1.3ColumnnpInputAnalogCurrentread-onlycurrentCurrent via RS_P, RS_N contacts of Current Loop Adapter, uA (microamperes)
1.3.6.1.4.1.25728.8200.1.1.4ColumnnpInputAnalogVoltageread-onlycurrentVoltage on RS_P contact of Current Loop Adapter Vs Ground, mV
1.3.6.1.4.1.25728.8200.1.1.5ColumnnpInputAnalogResistanceread-onlycurrentResistance of the Current Loop, Ohm
1.3.6.1.4.1.25728.8200.1.1.6ColumnnpInputAnalogMemoread-onlycurrentCurrent Loop memo, what's connected
1.3.6.1.4.1.25728.8200.1.1.7ColumnnpInputAnalogPowerread-writecurrentControls power on Current Loop Adapter outputs +24V, +12V
1.3.6.1.4.1.25728.8200.1.1.8ColumnnpInputAnalogResetread-writecurrentWrite duration 1..25s to temporary switch off +12V, +24V outputs to reset sensor on the current loop by cycling it's power
1.3.6.1.4.1.25728.8200.1.1.11ColumnnpInputAnalogWorkRangeHighread-onlycurrentTop marging of Working Range, uA or mV or Ohm. If monitored value is outide of Working Range, Analog Failure take place. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.1.1.12ColumnnpInputAnalogSafeRangeHighread-onlycurrentTop marging of Safe Range, uA or mV or Ohm. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.1.1.13ColumnnpInputAnalogSafeRangeLowread-onlycurrentBottom marging of Safe Range, uA or mV or Ohm. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.1.1.14ColumnnpInputAnalogWorkRangeLowread-onlycurrentBottom marging of Working Range, uA or mV or Ohm. If monitored value is outide of Working Range, Analog Failure take place. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.2NodenpInputAnalogTraps
1.3.6.1.4.1.25728.8200.2.0NodenpInputAnalogTrapPrefix
1.3.6.1.4.1.25728.8200.2.0.1NotificationnpInputAnalogTrapcurrentStatus of 1W Analog Input Adapter has changed
1.3.6.1.4.1.25728.8200.2.1ScalarnpInputAnalogTrapSensorNaccessible-for-notifycurrentThe id of 1Wire Current Loop Adapter, 1 to 4
1.3.6.1.4.1.25728.8200.2.2ScalarnpInputAnalogTrapStatusaccessible-for-notifycurrentNew status of Current Loop Signal, failure1w = no reply from the adapter on 1wire bus, failureAnalog = signal is beyond it's Working Range, belowSafe, safe, ab…
1.3.6.1.4.1.25728.8200.2.3ScalarnpInputAnalogTrapCurrentaccessible-for-notifycurrentCurrent via RS_P, RS_N contacts of Current Loop Adapter, uA (microamperes)
1.3.6.1.4.1.25728.8200.2.4ScalarnpInputAnalogTrapVoltageaccessible-for-notifycurrentVoltage on RS_P contact of Current Loop Adapter Vs Ground, mV
1.3.6.1.4.1.25728.8200.2.5ScalarnpInputAnalogTrapResistanceaccessible-for-notifycurrentResistance of the Current Loop, Ohm
1.3.6.1.4.1.25728.8200.2.6ScalarnpInputAnalogTrapMemoaccessible-for-notifycurrentCurrent Loop memo
1.3.6.1.4.1.25728.8200.2.7ScalarnpInputAnalogTrapPoweraccessible-for-notifycurrentStatus of power outputs +12V, +24V, temporary switching off for reset ignored
1.3.6.1.4.1.25728.8200.2.11ScalarnpInputAnalogTrapWorkRangeHighaccessible-for-notifycurrentTop marging of Working Range, uA or mV or Ohm. If monitored value is outide of Working Range, Analog Failure take place. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.2.12ScalarnpInputAnalogTrapSafeRangeHighaccessible-for-notifycurrentTop marging of Safe Range, uA or mV or Ohm. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.2.13ScalarnpInputAnalogTrapSafeRangeLowaccessible-for-notifycurrentBottom marging of Safe Range, uA or mV or Ohm. If not specified, value is -32768
1.3.6.1.4.1.25728.8200.2.14ScalarnpInputAnalogTrapWorkRangeLowaccessible-for-notifycurrentBottom marging of Working Range, uA or mV or Ohm. If monitored value is outide of Working Range, Analog Failure take place. If not specified, value is -32768
1.3.6.1.4.1.25728.8400NodenpRelHumidity
1.3.6.1.4.1.25728.8400.1TablenpRelHumTablenot-accessiblecurrentHumidity+Temperature Sensors Table
1.3.6.1.4.1.25728.8400.1.1RownpRelHumEntrynot-accessiblecurrentHumidity+Temperature Sensors Table Row
1.3.6.1.4.1.25728.8400.1.1.1ColumnnpRelHumNread-onlycurrentIndex of Humidity+Temperature sensor, 1 to max supported
1.3.6.1.4.1.25728.8400.1.1.2ColumnnpRelHumValueread-onlycurrentRelative humidity value, %
1.3.6.1.4.1.25728.8400.1.1.3ColumnnpRelHumStatusread-onlycurrentStatus of Relative Humiduty
1.3.6.1.4.1.25728.8400.1.1.4ColumnnpRelHumTempValueread-onlycurrentSensor temperature, deg.C
1.3.6.1.4.1.25728.8400.1.1.5ColumnnpRelHumTempStatusread-onlycurrentStatus of Relative Humiduty
1.3.6.1.4.1.25728.8400.1.1.6ColumnnpRelHumMemoread-onlycurrentSensor Memo/Location
1.3.6.1.4.1.25728.8400.1.1.9ColumnnpRelHumTempSafeRangeHighread-onlycurrentTemperature safe range, top margin, deg.C
1.3.6.1.4.1.25728.8400.1.1.10ColumnnpRelHumTempSafeRangeLowread-onlycurrentTemperature safe range, bottom margin, deg.C
1.3.6.1.4.1.25728.8400.2NodenpRelHumSensor
1.3.6.1.4.1.25728.8400.2.2ScalarnpRelHumSensorValueHread-onlycurrentRelative humidity value, %
1.3.6.1.4.1.25728.8400.2.3ScalarnpRelHumSensorStatusread-onlycurrentStatus of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected
1.3.6.1.4.1.25728.8400.2.4ScalarnpRelHumSensorValueTread-onlycurrentSensor temperature, deg.C
1.3.6.1.4.1.25728.8400.2.5ScalarnpRelHumSensorStatusHread-onlycurrentStatus of Relative Humiduty
1.3.6.1.4.1.25728.8400.2.7ScalarnpRelHumSafeRangeHighread-onlycurrentRelative Humidity safe range, top margin, %RH
1.3.6.1.4.1.25728.8400.2.8ScalarnpRelHumSafeRangeLowread-onlycurrentRelative Humidity safe range, bottom margin, %RH
1.3.6.1.4.1.25728.8400.2.9ScalarnpRelHumSensorValueT100read-onlycurrentSensor temperature, deg.C * 100 (fixed point two decimal places) Used to get access to the fractional part of T value
1.3.6.1.4.1.25728.8400.3NodenpRelHumTrapData
1.3.6.1.4.1.25728.8400.3.1ScalarnpRelHumTrapDataNread-onlycurrentIndex of Humidity+Temperature sensor, 1 to max supported
1.3.6.1.4.1.25728.8400.3.2ScalarnpRelHumTrapDataValueread-onlycurrentSensor humidity, %RH, or temperature, deg.C
1.3.6.1.4.1.25728.8400.3.4ScalarnpRelHumTrapDataStatusread-onlycurrentStatus of humidity or temperature
1.3.6.1.4.1.25728.8400.3.6ScalarnpRelHumTrapDataMemoread-onlycurrentSensor Memo/Location
1.3.6.1.4.1.25728.8400.3.7ScalarnpRelHumTrapDataSafeRangeHighread-onlycurrentRelative Humidity safe range, top margin, %RH or deg.C
1.3.6.1.4.1.25728.8400.3.8ScalarnpRelHumTrapDataSafeRangeLowread-onlycurrentRelative Humidity safe range, bottom margin, %RH or deg.C
1.3.6.1.4.1.25728.8400.7NodenpRelHumTrapTemp
1.3.6.1.4.1.25728.8400.7.100NotificationnpRelHumTrapTempFailcurrentSensor failed!
1.3.6.1.4.1.25728.8400.7.101NotificationnpRelHumTrapTempBelowSafecurrentTemperature below the Safe range
1.3.6.1.4.1.25728.8400.7.102NotificationnpRelHumTrapTempSafecurrentTemperature in the Safe range
1.3.6.1.4.1.25728.8400.7.103NotificationnpRelHumTrapTempAboveSafecurrentTemperature above the Safe range
1.3.6.1.4.1.25728.8400.7.127NodenpRelHumTrapTempAllEvents
1.3.6.1.4.1.25728.8400.7.127.99NotificationnpRelHumTrapTempAllChannelscurrentStatus of Temperature has changed!
1.3.6.1.4.1.25728.8400.9NodenpRelHumTraps
1.3.6.1.4.1.25728.8400.9.0NodenpRelHumTrapPrefix
1.3.6.1.4.1.25728.8400.9.0.1NotificationnpRelHumTrapcurrentStatus of Relative Humidity RH sensor has changed!
1.3.6.1.4.1.25728.8400.9.0.1.100NotificationnpRelHumTrapFailcurrentRel.Humidity sensor failed!
1.3.6.1.4.1.25728.8400.9.0.1.101NotificationnpRelHumTrapBelowSafecurrentHumidity below the Safe range
1.3.6.1.4.1.25728.8400.9.0.1.102NotificationnpRelHumTrapSafecurrentHumidity in the Safe range
1.3.6.1.4.1.25728.8400.9.0.1.103NotificationnpRelHumTrapAboveSafecurrentHumidity above the Safe range
1.3.6.1.4.1.25728.8400.9.0.1.127NodenpRelHumTrapAllEvents
1.3.6.1.4.1.25728.8400.9.0.1.127.99NotificationnpRelHumTrapAllChannelscurrentStatus of Humidity has changed!
1.3.6.1.4.1.25728.8800NodenpThermo
1.3.6.1.4.1.25728.8800.1TablenpThermoTablenot-accessiblecurrentThermo Sensors Table
1.3.6.1.4.1.25728.8800.1.1RownpThermoEntrynot-accessiblecurrentThermo Sensors Table Row
1.3.6.1.4.1.25728.8800.1.1.1ColumnnpThermoSensorNread-onlycurrentThe id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.1.1.2ColumnnpThermoValueread-onlycurrentTemperature, deg.C
1.3.6.1.4.1.25728.8800.1.1.3ColumnnpThermoStatusread-onlycurrentTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.1.1.4ColumnnpThermoLowread-onlycurrentBottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.5ColumnnpThermoHighread-onlycurrentTop margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.6ColumnnpThermoMemoread-onlycurrentT channel memo
1.3.6.1.4.1.25728.8800.1.1.7ColumnnpThermoValuePreciseread-onlycurrentTemperature, deg.C, with fractional part 3 digits after point
1.3.6.1.4.1.25728.8800.2NodenpThermoTraps
1.3.6.1.4.1.25728.8800.2.0NodenpThermoTrapPrefix
1.3.6.1.4.1.25728.8800.2.0.1NotificationnpThermoTrapcurrentStatus of Thermo sensor is changed (crossing of normal temp. range)
1.3.6.1.4.1.25728.8800.2.1ScalarnpThermoTrapSensorNread-onlycurrentThe id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.2.2ScalarnpThermoTrapValueread-onlycurrentTemperature, deg.C
1.3.6.1.4.1.25728.8800.2.3ScalarnpThermoTrapStatusread-onlycurrentTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.2.4ScalarnpThermoTrapLowread-onlycurrentBottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.5ScalarnpThermoTrapHighread-onlycurrentTop margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.6ScalarnpThermoTrapMemoread-onlycurrentT channel memo
1.3.6.1.4.1.25728.8900NodenpIo
1.3.6.1.4.1.25728.8900.1TablenpIoTablenot-accessiblecurrentDigital Input/output Table
1.3.6.1.4.1.25728.8900.1.1RownpIoEntrynot-accessiblecurrentDigital Input/output Table Row
1.3.6.1.4.1.25728.8900.1.1.1ColumnnpIoLineNread-onlycurrentNumber of IO line, from 1 to max supported
1.3.6.1.4.1.25728.8900.1.1.2ColumnnpIoLevelInread-onlycurrentInput level, 0 or 1
1.3.6.1.4.1.25728.8900.1.1.3ColumnnpIoLevelOutread-writecurrentOutput level, 0 or 1. Write -1 to flip output.
1.3.6.1.4.1.25728.8900.1.1.6ColumnnpIoMemoread-onlycurrentIO line memo
1.3.6.1.4.1.25728.8900.1.1.9ColumnnpIoPulseCounterread-writecurrentPulse Counter on IO input line (counts positive fronts) Write 0 to reset.
1.3.6.1.4.1.25728.8900.1.1.12ColumnnpIoSinglePulseDurationread-writecurrentSet duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms
1.3.6.1.4.1.25728.8900.1.1.13ColumnnpIoSinglePulseStartread-writecurrentWrite 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration
1.3.6.1.4.1.25728.8900.2NodenpIoTraps
1.3.6.1.4.1.25728.8900.2.0NodenpIoTrapPrefix
1.3.6.1.4.1.25728.8900.2.0.1NotificationnpIoTrapcurrentInput state of IO line is changed
1.3.6.1.4.1.25728.8900.2.1ScalarnpIoTrapLineNread-onlycurrentTrap data, Number of IO line
1.3.6.1.4.1.25728.8900.2.2ScalarnpIoTrapLevelInread-onlycurrentTrap data, new Input level, 0 or 1
1.3.6.1.4.1.25728.8900.2.6ScalarnpIoTrapMemoread-onlycurrentTrap data, IO line memo
1.3.6.1.4.1.25728.8900.2.7ScalarnpIoTrapLevelLegendread-onlycurrentLegend for current logic level on the IO line
1.3.6.1.4.1.25728.9000NodenpVoltage
1.3.6.1.4.1.25728.9000.1TablenpVoltageTablenot-accessiblecurrentVoltage Monitoring Sensors Table
1.3.6.1.4.1.25728.9000.1.1RownpVoltageEntrynot-accessiblecurrentVoltage Monitoring Sensors Table Row
1.3.6.1.4.1.25728.9000.1.1.1ColumnnpVoltageNread-onlycurrentThe ID of Voltage Monitoring sensor, 1 to 3
1.3.6.1.4.1.25728.9000.1.1.2ColumnnpVoltageRMSread-onlycurrentVoltage value, V
1.3.6.1.4.1.25728.9000.1.1.3ColumnnpVoltageStatusread-onlycurrentStatus of voltage
1.3.6.1.4.1.25728.9000.1.1.4ColumnnpVoltageFreqread-onlycurrentFrequency value in units of .01 Hz
1.3.6.1.4.1.25728.9000.1.1.5ColumnnpVoltageFreqStatusread-onlycurrentStatus of frequency
1.3.6.1.4.1.25728.9000.1.1.6ColumnnpVoltageMemoread-onlycurrentVoltage Monitoring sensor memo
1.3.6.1.4.1.25728.9000.1.1.10ColumnnpVoltageSagCounterread-writecurrentCounter of voltage sags
1.3.6.1.4.1.25728.9000.1.1.11ColumnnpVoltageSagStatusread-onlycurrentStatus of voltage sag
1.3.6.1.4.1.25728.9000.1.1.12ColumnnpVoltageLowerNoneStatusread-writecurrentThe lower margin of NoSags status of voltage sag, %
1.3.6.1.4.1.25728.9000.1.1.13ColumnnpVoltageLowerSmallStatusread-writecurrentThe lower margin of Small status of voltage sag, %
1.3.6.1.4.1.25728.9000.1.1.14ColumnnpVoltageLowerMediumStatusread-writecurrentThe lower margin of Medium status of voltage sag, %
1.3.6.1.4.1.25728.9000.1.1.20ColumnnpVoltageStandardread-writecurrentNominal voltage, V
1.3.6.1.4.1.25728.9000.1.1.30ColumnnpVoltagePeakread-onlycurrentPeak voltage, V
1.3.6.1.4.1.25728.9000.1.1.31ColumnnpVoltagePeakStatusread-onlycurrentStatus of peak voltage
1.3.6.1.4.1.25728.9000.2NodenpVoltageTraps
1.3.6.1.4.1.25728.9000.2.0NodenpVoltageTrapPrefix
1.3.6.1.4.1.25728.9000.2.0.1NotificationnpVoltageTrapcurrentStatus of Voltage Monitoring sensor is changed
1.3.6.1.4.1.25728.9000.2.1ScalarnpVoltageTrapNread-onlycurrentThe ID of Voltage Monitoring sensor, 1 to 3
1.3.6.1.4.1.25728.9000.2.2ScalarnpVoltageTrapRMSread-onlycurrentVoltage value, V
1.3.6.1.4.1.25728.9000.2.3ScalarnpVoltageTrapStatusread-onlycurrentStatus of voltage
1.3.6.1.4.1.25728.9000.2.4ScalarnpVoltageTrapFreqread-onlycurrentFrequency value in units of .01 Hz
1.3.6.1.4.1.25728.9000.2.5ScalarnpVoltageTrapFreqStatusread-onlycurrentStatus of frequency
1.3.6.1.4.1.25728.9000.2.6ScalarnpVoltageTrapMemoread-onlycurrentVoltage Monitoring sensor memo
1.3.6.1.4.1.25728.9000.2.10ScalarnpVoltageTrapSagCounterread-onlycurrentCounter of voltage sags
1.3.6.1.4.1.25728.9000.2.11ScalarnpVoltageTrapSagStatusread-onlycurrentStatus of voltage sag
1.3.6.1.4.1.25728.9000.2.30ScalarnpVoltageTrapPeakread-onlycurrentPeak voltage, V
1.3.6.1.4.1.25728.9000.2.31ScalarnpVoltageTrapPeakStatusread-onlycurrentStatus of peak voltage
Type Definitions
NameSyntaxStatusDescription
FixedPoint1000INTEGERcurrentFixed-point value as Integer, 3 decimal gigits after point (i.e. value*1000 rounded to Integer)
MIB Viewer