DKT-FE-MIB
158 objects
DKT Fast Ethernet MIB.
Imported Objects
| DKT-MIB | dkt |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27304.12 | IdentityfeMIB | DKT Fast Ethernet MIB. | ||
| 1.3.6.1.4.1.27304.12.1 | NodefeSwitchEngine | |||
| 1.3.6.1.4.1.27304.12.1.1 | ScalarfeATU | read-only | current | Dumps the Address Translation Unit (ATU) Switch table in semi colon format |
| 1.3.6.1.4.1.27304.12.1.2 | ScalarfeUnicastDelete | write-only | current | Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table. |
| 1.3.6.1.4.1.27304.12.1.3 | ScalarfeMulticastDelete | write-only | current | Removes a multicast IP address from the Address Translation Unit (ATU) Switch table. |
| 1.3.6.1.4.1.27304.12.1.4 | ScalarfeIGMPSnooping | read-write | current | Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured p… |
| 1.3.6.1.4.1.27304.12.1.5 | ScalarfeVTU | read-only | current | Dumps the VLAN Table Unit (VTU) Switch table in semi colon format |
| 1.3.6.1.4.1.27304.12.1.6 | ScalarfeVLANCreate | write-only | current | Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE |
| 1.3.6.1.4.1.27304.12.1.7 | ScalarfeVLANDelete | write-only | current | Deletes a VLAN, input parameter is VLAN VID: 0 - 4095 |
| 1.3.6.1.4.1.27304.12.1.8 | ScalarfeClearVTU | write-only | current | Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table |
| 1.3.6.1.4.1.27304.12.1.9 | ScalarfeDumpPIRLBuckets | read-only | current | Dumps a list of the active buckets. |
| 1.3.6.1.4.1.27304.12.1.10 | ScalarfeDisablePIRLBucket | write-only | current | Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11. |
| 1.3.6.1.4.1.27304.12.1.11 | ScalarfeVLANProviderMode | read-write | current | Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. N… |
| 1.3.6.1.4.1.27304.12.2 | NodefePorts | |||
| 1.3.6.1.4.1.27304.12.2.1 | NodefeCPUPort | |||
| 1.3.6.1.4.1.27304.12.2.1.1 | ScalarfeCPUPortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.2 | ScalarfeCPUPortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD |
| 1.3.6.1.4.1.27304.12.2.1.3 | ScalarfeCPUPortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.1.4 | ScalarfeCPUPortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.5 | ScalarfeCPUPortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.6 | ScalarfeCPUPortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.7 | ScalarfeCPUPortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.1.8 | ScalarfeCPUPortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.1.9 | ScalarfeCPUPortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.1.10 | ScalarfeCPUPortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.11 | ScalarfeCPUPortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.12 | ScalarfeCPUPortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.1.13 | ScalarfeCPUPortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.1.14 | ScalarfeCPUPortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.1.15 | ScalarfeCPUPortIngressRateLimitation | read-write | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.1.16 | ScalarfeCPUPortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.1.17 | ScalarfeCPUPortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.18 | ScalarfeCPUPortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.1.19 | ScalarfeCPUPortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.1.20 | ScalarfeCPUPortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.1.21 | ScalarfeCPUPortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.1.22 | ScalarfeCPUPortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.2 | NodefeWANPort | |||
| 1.3.6.1.4.1.27304.12.2.2.1 | ScalarfeWANPortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.2 | ScalarfeWANPortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.12.2.2.3 | ScalarfeWANPortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.2.4 | ScalarfeWANPortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.5 | ScalarfeWANPortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.6 | ScalarfeWANPortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.7 | ScalarfeWANPortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.2.8 | ScalarfeWANPortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.2.9 | ScalarfeWANPortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.2.10 | ScalarfeWANPortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.11 | ScalarfeWANPortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.12 | ScalarfeWANPortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.2.13 | ScalarfeWANPortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.2.14 | ScalarfeWANPortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.2.15 | ScalarfeWANPortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.2.16 | ScalarfeWANPortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.2.17 | ScalarfeWANPortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.18 | ScalarfeWANPortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.2.19 | ScalarfeWANPortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.2.20 | ScalarfeWANPortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.2.21 | ScalarfeWANPortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.2.22 | ScalarfeWANPortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.2.23 | ScalarfeWANPortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.12.2.3 | NodefeLAN1Port | |||
| 1.3.6.1.4.1.27304.12.2.3.1 | ScalarfeLAN1PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.2 | ScalarfeLAN1PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.12.2.3.3 | ScalarfeLAN1PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.3.4 | ScalarfeLAN1PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.5 | ScalarfeLAN1PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.6 | ScalarfeLAN1PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.7 | ScalarfeLAN1PortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.3.8 | ScalarfeLAN1PortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.3.9 | ScalarfeLAN1PortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.3.10 | ScalarfeLAN1PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.11 | ScalarfeLAN1PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.12 | ScalarfeLAN1PortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.3.13 | ScalarfeLAN1PortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.3.14 | ScalarfeLAN1PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.3.15 | ScalarfeLAN1PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.3.16 | ScalarfeLAN1PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.3.17 | ScalarfeLAN1PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.18 | ScalarfeLAN1PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.3.19 | ScalarfeLAN1PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.3.20 | ScalarfeLAN1PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.3.21 | ScalarfeLAN1PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.3.22 | ScalarfeLAN1PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.3.23 | ScalarfeLAN1PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.12.2.4 | NodefeLAN2Port | |||
| 1.3.6.1.4.1.27304.12.2.4.1 | ScalarfeLAN2PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.2 | ScalarfeLAN2PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.12.2.4.3 | ScalarfeLAN2PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.4.4 | ScalarfeLAN2PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.5 | ScalarfeLAN2PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.6 | ScalarfeLAN2PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.7 | ScalarfeLAN2PortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.4.8 | ScalarfeLAN2PortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.4.9 | ScalarfeLAN2PortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.4.10 | ScalarfeLAN2PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.11 | ScalarfeLAN2PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.12 | ScalarfeLAN2PortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.4.13 | ScalarfeLAN2PortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.4.14 | ScalarfeLAN2PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.4.15 | ScalarfeLAN2PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.4.16 | ScalarfeLAN2PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.4.17 | ScalarfeLAN2PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.18 | ScalarfeLAN2PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.4.19 | ScalarfeLAN2PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.4.20 | ScalarfeLAN2PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.4.21 | ScalarfeLAN2PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.4.22 | ScalarfeLAN2PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.4.23 | ScalarfeLAN2PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.12.2.5 | NodefeLAN3Port | |||
| 1.3.6.1.4.1.27304.12.2.5.1 | ScalarfeLAN3PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.2 | ScalarfeLAN3PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.12.2.5.3 | ScalarfeLAN3PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.5.4 | ScalarfeLAN3PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.5 | ScalarfeLAN3PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.6 | ScalarfeLAN3PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.7 | ScalarfeLAN3PortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.5.8 | ScalarfeLAN3PortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.5.9 | ScalarfeLAN3PortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.5.10 | ScalarfeLAN3PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.11 | ScalarfeLAN3PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.12 | ScalarfeLAN3PortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.5.13 | ScalarfeLAN3PortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.5.14 | ScalarfeLAN3PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.5.15 | ScalarfeLAN3PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.5.16 | ScalarfeLAN3PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.5.17 | ScalarfeLAN3PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.18 | ScalarfeLAN3PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.5.19 | ScalarfeLAN3PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.5.20 | ScalarfeLAN3PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.5.21 | ScalarfeLAN3PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.5.22 | ScalarfeLAN3PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.5.23 | ScalarfeLAN3PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.12.2.6 | NodefeLAN4Port | |||
| 1.3.6.1.4.1.27304.12.2.6.1 | ScalarfeLAN4PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.2 | ScalarfeLAN4PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.12.2.6.3 | ScalarfeLAN4PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.12.2.6.4 | ScalarfeLAN4PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.5 | ScalarfeLAN4PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.6 | ScalarfeLAN4PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.7 | ScalarfeLAN4PortFramePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.6.8 | ScalarfeLAN4PortQueuePriorityOverwrite | read-write | current | Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. |
| 1.3.6.1.4.1.27304.12.2.6.9 | ScalarfeLAN4PortQueuePriority | read-write | current | Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 |
| 1.3.6.1.4.1.27304.12.2.6.10 | ScalarfeLAN4PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.11 | ScalarfeLAN4PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.12 | ScalarfeLAN4PortMap2PIRL | write-only | current | Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.6.13 | ScalarfeLAN4PortDeletePortMap2PIRL | write-only | current | Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. |
| 1.3.6.1.4.1.27304.12.2.6.14 | ScalarfeLAN4PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.12.2.6.15 | ScalarfeLAN4PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.12.2.6.16 | ScalarfeLAN4PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.12.2.6.17 | ScalarfeLAN4PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.18 | ScalarfeLAN4PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.12.2.6.19 | ScalarfeLAN4PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.12.2.6.20 | ScalarfeLAN4PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.12.2.6.21 | ScalarfeLAN4PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.12.2.6.22 | ScalarfeLAN4PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.12.2.6.23 | ScalarfeLAN4PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.12.4 | GroupfeModuleGroup | current | The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00. |