DKT-GE-MIB
139 objects
DKT Gigabit MIB.
Imported Objects
| DKT-MIB | dkt |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27304.14 | IdentitygeMIB | DKT Gigabit MIB. | ||
| 1.3.6.1.4.1.27304.14.1 | NodegeSwitchEngine | |||
| 1.3.6.1.4.1.27304.14.1.1 | ScalargeATU | read-only | current | Dumps the Address Translation Unit (ATU) Switch table in semi colon format |
| 1.3.6.1.4.1.27304.14.1.2 | ScalargeUnicastDelete | write-only | current | Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table. |
| 1.3.6.1.4.1.27304.14.1.3 | ScalargeMulticastDelete | write-only | current | Removes a multicast IP address from the Address Translation Unit (ATU) Switch table. |
| 1.3.6.1.4.1.27304.14.1.4 | ScalargeIGMPSnooping | read-write | current | Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured p… |
| 1.3.6.1.4.1.27304.14.1.5 | ScalargeVTU | read-only | current | Dumps the VLAN Table Unit (VTU) Switch table in semi colon format |
| 1.3.6.1.4.1.27304.14.1.6 | ScalargeVLANCreate | write-only | current | Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE |
| 1.3.6.1.4.1.27304.14.1.7 | ScalargeVLANDelete | write-only | current | Deletes a VLAN, input parameter is VLAN VID: 0 - 4095 |
| 1.3.6.1.4.1.27304.14.1.8 | ScalargeClearVTU | write-only | current | Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table |
| 1.3.6.1.4.1.27304.14.1.9 | ScalargeDumpPIRLBuckets | read-only | current | Dumps a list of the active buckets. |
| 1.3.6.1.4.1.27304.14.1.10 | ScalargeVLANProviderMode | read-write | current | Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. N… |
| 1.3.6.1.4.1.27304.14.2 | NodegePorts | |||
| 1.3.6.1.4.1.27304.14.2.1 | NodegeCPUPort | |||
| 1.3.6.1.4.1.27304.14.2.1.1 | ScalargeCPUPortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.2 | ScalargeCPUPortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO |
| 1.3.6.1.4.1.27304.14.2.1.3 | ScalargeCPUPortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.1.4 | ScalargeCPUPortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.5 | ScalargeCPUPortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.6 | ScalargeCPUPortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.7 | ScalargeCPUPortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.8 | ScalargeCPUPortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.9 | ScalargeCPUPortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.1.10 | ScalargeCPUPortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.1.11 | ScalargeCPUPortIngressRateLimitation | read-write | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.1.12 | ScalargeCPUPortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.1.13 | ScalargeCPUPortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.14 | ScalargeCPUPortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.1.15 | ScalargeCPUPortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.1.16 | ScalargeCPUPortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.1.17 | ScalargeCPUPortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.1.18 | ScalargeCPUPortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.1.19 | ScalargeCPUPortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.2 | NodegeWANPort | |||
| 1.3.6.1.4.1.27304.14.2.2.1 | ScalargeWANPortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.2 | ScalargeWANPortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.14.2.2.3 | ScalargeWANPortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.2.4 | ScalargeWANPortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.5 | ScalargeWANPortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.6 | ScalargeWANPortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.7 | ScalargeWANPortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.8 | ScalargeWANPortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.9 | ScalargeWANPortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.2.10 | ScalargeWANPortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.2.11 | ScalargeWANPortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.2.12 | ScalargeWANPortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.2.13 | ScalargeWANPortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.14 | ScalargeWANPortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.2.15 | ScalargeWANPortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.2.16 | ScalargeWANPortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.2.17 | ScalargeWANPortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.2.18 | ScalargeWANPortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.2.19 | ScalargeWANPortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.2.20 | ScalargeWANPortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.14.2.3 | NodegeLAN1Port | |||
| 1.3.6.1.4.1.27304.14.2.3.1 | ScalargeLAN1PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.2 | ScalargeLAN1PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.14.2.3.3 | ScalargeLAN1PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.3.4 | ScalargeLAN1PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.5 | ScalargeLAN1PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.6 | ScalargeLAN1PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.7 | ScalargeLAN1PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.8 | ScalargeLAN1PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.9 | ScalargeLAN1PortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.3.10 | ScalargeLAN1PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.3.11 | ScalargeLAN1PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.3.12 | ScalargeLAN1PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.3.13 | ScalargeLAN1PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.14 | ScalargeLAN1PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.3.15 | ScalargeLAN1PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.3.16 | ScalargeLAN1PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.3.17 | ScalargeLAN1PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.3.18 | ScalargeLAN1PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.3.19 | ScalargeLAN1PortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.3.20 | ScalargeLAN1PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.14.2.4 | NodegeLAN2Port | |||
| 1.3.6.1.4.1.27304.14.2.4.1 | ScalargeLAN2PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.2 | ScalargeLAN2PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.14.2.4.3 | ScalargeLAN2PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.4.4 | ScalargeLAN2PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.5 | ScalargeLAN2PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.6 | ScalargeLAN2PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.7 | ScalargeLAN2PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.8 | ScalargeLAN2PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.9 | ScalargeLAN2PortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.4.10 | ScalargeLAN2PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.4.11 | ScalargeLAN2PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.4.12 | ScalargeLAN2PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.4.13 | ScalargeLAN2PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.14 | ScalargeLAN2PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.4.15 | ScalargeLAN2PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.4.16 | ScalargeLAN2PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.4.17 | ScalargeLAN2PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.4.18 | ScalargeLAN2PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.4.19 | ScalargeLAN2PortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.4.20 | ScalargeLAN2PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.14.2.5 | NodegeLAN3Port | |||
| 1.3.6.1.4.1.27304.14.2.5.1 | ScalargeLAN3PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.2 | ScalargeLAN3PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.14.2.5.3 | ScalargeLAN3PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.5.4 | ScalargeLAN3PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.5 | ScalargeLAN3PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.6 | ScalargeLAN3PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.7 | ScalargeLAN3PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.8 | ScalargeLAN3PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.9 | ScalargeLAN3PortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.5.10 | ScalargeLAN3PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.5.11 | ScalargeLAN3PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.5.12 | ScalargeLAN3PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.5.13 | ScalargeLAN3PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.14 | ScalargeLAN3PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.5.15 | ScalargeLAN3PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.5.16 | ScalargeLAN3PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.5.17 | ScalargeLAN3PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.5.18 | ScalargeLAN3PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.5.19 | ScalargeLAN3PortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.5.20 | ScalargeLAN3PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.14.2.6 | NodegeLAN4Port | |||
| 1.3.6.1.4.1.27304.14.2.6.1 | ScalargeLAN4PortAutoNegotiation | read-write | current | Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.2 | ScalargeLAN4PortSpeedMode | read-write | current | Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) |
| 1.3.6.1.4.1.27304.14.2.6.3 | ScalargeLAN4PortLinkStatus | read-only | current | Gets the Link status for the port |
| 1.3.6.1.4.1.27304.14.2.6.4 | ScalargeLAN4PortFlowControl | read-write | current | Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.5 | ScalargeLAN4PortIEEEQoSPriority | read-write | current | Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.6 | ScalargeLAN4PortIPQoSPriority | read-write | current | Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.7 | ScalargeLAN4PortQoSPortMapRule | read-write | current | Forces queue priority for a port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.8 | ScalargeLAN4PortVIDNRLEnable | read-write | current | Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.9 | ScalargeLAN4PortDisablePIRL2Bucket | write-only | current | Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. |
| 1.3.6.1.4.1.27304.14.2.6.10 | ScalargeLAN4PortEgressRateLimitation | read-write | current | Sets the egress limitation rate for the port. Input parameter is value in kbps |
| 1.3.6.1.4.1.27304.14.2.6.11 | ScalargeLAN4PortIngressRateLimitation | write-only | current | Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) |
| 1.3.6.1.4.1.27304.14.2.6.12 | ScalargeLAN4PortDefaultVLAN | read-write | current | Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 |
| 1.3.6.1.4.1.27304.14.2.6.13 | ScalargeLAN4PortForceDefaultVID | read-write | current | Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.14 | ScalargeLAN4PortVLANPortMode | read-write | current | Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure |
| 1.3.6.1.4.1.27304.14.2.6.15 | ScalargeLAN4PortBlockAllUnknown | read-write | current | This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. |
| 1.3.6.1.4.1.27304.14.2.6.16 | ScalargeLAN4PortIGMPSnooping | read-write | current | Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. |
| 1.3.6.1.4.1.27304.14.2.6.17 | ScalargeLAN4PortAddUnicast | write-only | current | Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff |
| 1.3.6.1.4.1.27304.14.2.6.18 | ScalargeLAN4PortAddMulticast | write-only | current | Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd |
| 1.3.6.1.4.1.27304.14.2.6.19 | ScalargeLAN4PortMtu | read-write | current | The MTU size of the port. |
| 1.3.6.1.4.1.27304.14.2.6.20 | ScalargeLAN4PortArpMirroring | read-write | current | Mirror ARP packets seen on the port to the CPU port. |
| 1.3.6.1.4.1.27304.14.4 | GroupgeModuleGroup | current | The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00. |