DLINK-3100-MNGINF-MIB
29 objects
The private MIB module definition for management access control.
Imported Objects
| DLINK-3100-MIB | rnd |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.94.89.89.89 | IdentityrlMngInf | The private MIB module definition for management access control. | ||
| 1.3.6.1.4.1.171.10.94.89.89.89.1 | ScalarrlMngInfMibVersion | read-only | current | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.171.10.94.89.89.89.2 | ScalarrlMngInfEnable | read-write | current | The variable specifies if Management ACL functionality is enabled. |
| 1.3.6.1.4.1.171.10.94.89.89.89.3 | ScalarrlMngInfActiveListName | read-write | current | The currently activated Management ACL name |
| 1.3.6.1.4.1.171.10.94.89.89.89.4 | TablerlMngInfListTable | not-accessible | current | The table specifies all defined Access Lists definitions for IPv4 addresses. Provide backward compatibility for previous versions. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1 | RowrlMngInfListEntry | not-accessible | current | Row definition for this table. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.1 | ColumnrlMngInfListName | read-only | current | The Name of the Access List. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.2 | ColumnrlMngInfListPriority | read-only | current | The Priority value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.3 | ColumnrlMngInfListIfIndex | read-write | current | The IfIndex value. The IfIndex can be configured to be 0, which means don't care value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.4 | ColumnrlMngInfListIpAddr | read-write | current | The IP address. The IP address can be configured to be 0, which means don't care value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.5 | ColumnrlMngInfListIpNetMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.6 | ColumnrlMngInfListService | read-write | current | Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.7 | ColumnrlMngInfListAction | read-write | current | Action type. Can be permit or deny. |
| 1.3.6.1.4.1.171.10.94.89.89.89.4.1.8 | ColumnrlMngInfListRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.171.10.94.89.89.89.5 | ScalarrlMngInfAuditingEnable | read-write | current | Controls whether SysLog messages should be issued on reject by rule |
| 1.3.6.1.4.1.171.10.94.89.89.89.6 | TablerlMngInfListInetTable | not-accessible | current | The table specifies all defined Access Lists definitions definitions for both IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1 | RowrlMngInfListInetEntry | not-accessible | current | Row definition for this table. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.1 | ColumnrlMngInfListInetName | read-only | current | The Name of the Access List. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.2 | ColumnrlMngInfListInetPriority | read-only | current | The Priority value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.3 | ColumnrlMngInfListInetIfIndex | read-write | current | The IfIndex value. The IfIndex can be configured to be 0, which means don't care value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.4 | ColumnrlMngInfListInetIpAddrType | read-write | current | The Inet address type. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.5 | ColumnrlMngInfListInetIpAddr | read-write | current | The Inet address.Used for both IPv4 and IPv6 addresses. The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , which means ignored value. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.6 | ColumnrlMngInfListInetIpNetMask | read-write | current | This field will used in case of IPv4 addresses . For IPv6 this field ignored. Default value 255.255.255.255. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.7 | ColumnrlMngInfListInetService | read-write | current | Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.8 | ColumnrlMngInfListInetAction | read-write | current | Action type. Can be permit or deny. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.9 | ColumnrlMngInfListInetRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.171.10.94.89.89.89.6.1.10 | ColumnrlMngInfListInetIPv6PrefixLength | read-write | current | IPv6 prefix length.This field provide IPv6 prefix length (mask) for IPv6 only.In case of IPv4 this field will ignored |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlMngInfActionType | INTEGER { permit(0), deny(1) } | current | Management ACL Action definition. |
| RlMngInfServiceType | INTEGER { dontCare(0), telnet(1), snmp(2), http(3), https(4), ssh(5), icmp(6) } | current | Management ACL Service type |