DLINK-3100-SYSLOG-DEVICE-MIB
42 objects
This MIB module defines a portion of the SNMP enterprise MIBs pertaining to the configuration and generation of Syslog compatible diagnostic messages.
Imported Objects
| DLINK-3100-MIB | rlSyslog |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE snmpModules Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.94.89.89.82.1 | IdentitysnmpSyslogDeviceMIB | This MIB module defines a portion of the SNMP enterprise MIBs pertaining to the configuration and generation of Syslog compatible diagnostic messages. | ||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.1 | NodesnmpSyslogDevice | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.1.1 | ScalarsnmpSyslogDeviceMessages | read-only | current | The number of messages successfully delivered to the upstream side of the syslog device software for processing. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.1.2 | ScalarsnmpSyslogDeviceMessagesDropped | read-only | current | The number of messages unable to be queued to the downstream side of the syslog device software for transmitting. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.1.3 | ScalarsnmpSyslogDeviceLastMessageTime | read-only | current | The sysUpTime of the last attempt, successful or otherwise, to queue a message to the downstream side of the syslog device software. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.1.4 | ScalarsnmpSyslogDeviceControl | read-write | current | A list of attributes to control the operation of the syslog device. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2 | NodesnmpSyslogCollector | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.1 | ScalarsnmpSyslogCollectorMaxEntries | read-only | current | The maximum number of entries allowed in the snmpSyslogCollectorTable. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.2 | ScalarsnmpSyslogCollectorNumEntries | read-only | current | The number of entries currently in the snmpSyslogCollectorTable. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.3 | ScalarsnmpSyslogCollectorTableNextAvailableIndex | read-only | current | This object indicates the numerically lowest available index within this entity, which may be used for the value of snmpSyslogCollectorIndex in the creation of… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4 | TablesnmpSyslogCollectorTable | not-accessible | current | A table containing Syslog collector information. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1 | RowsnmpSyslogCollectorEntry | not-accessible | current | Defines the information to generate syslog messages to an aggregating agent or collector. Entries within this table with an access level of read- create MUST b… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.1 | ColumnsnmpSyslogCollectorIndex | not-accessible | current | A unique arbitrary identifier for this syslog collector. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.2 | ColumnsnmpSyslogCollectorDescription | read-create | current | Administratively assigned textual description of this syslog collector. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.3 | ColumnsnmpSyslogCollectorAddressType | read-create | current | The type of Internet address by which the Syslog collector is specified in snmpSyslogCollectorAddress. Not all address types may be supported. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.4 | ColumnsnmpSyslogCollectorAddress | read-create | current | The Internet address for the Syslog message collector. The use of DNS domain names is discouraged, and agent support for them is optional. Deciding when, and h… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.5 | ColumnsnmpSyslogCollectorUdpPort | read-create | current | The UDP port number the syslog device is using to send requests to this syslog collector. If an entity only supports sending messages using a single UDP port t… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.6 | ColumnsnmpSyslogCollectorFacility | read-create | current | The syslog facility (local0-local7) that will be encoded in messages sent to this collector. If an entity only supports encoding a single facility in all messa… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.7 | ColumnsnmpSyslogCollectorSeverity | read-create | current | The maximum severity level of the messages that SHOULD be forwarded to the syslog collector. The higher the level, the lower the severity. If an entity only su… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.8 | ColumnsnmpSyslogCollectorMessagesIgnored | read-only | current | This is a count of messages not sent to this collector because the severity level of the message was above snmpSyslogCollectorSeverity, the higher the level, t… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.4.1.9 | ColumnsnmpSyslogCollectorRowStatus | read-create | current | This object allows for the dynamic creation and deletion of entries within the snmpSyslogCollectorTable as well as the activation and deactivation of these ent… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.5 | ScalarsnmpSyslogCollectorDefaultUdpPort | read-write | current | The default UDP port number that the managed entity is using to send syslog messages. This value will be used as the default value for snmpSyslogCollectorUdpPo… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.6 | ScalarsnmpSyslogCollectorDefaultFacility | read-write | current | The default syslog facility (local0-local7) that will be encoded in syslog messages. This value will be used as the default value for snmpSyslogCollectorFacili… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.2.7 | ScalarsnmpSyslogCollectorDefaultSeverity | read-write | current | The default syslog message severity level that will be used to filter all syslog messages. This value will be used as the default value for snmpSyslogCollector… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3 | NodesnmpSyslogApplication | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1 | TablesnmpSyslogApplicationTable | not-accessible | current | This is a table of applications on the managed entity that provide individual control over the severity level of the messages that they will generate. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1.1 | RowsnmpSyslogApplicationEntry | not-accessible | current | An individual application that provides that ability to control the messages that it generates based on a severity level. MUST be considered non-volatile and M… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1.1.1 | ColumnsnmpSyslogApplicationIndex | not-accessible | current | A unique arbitrary identifier for this application. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1.1.2 | ColumnsnmpSyslogApplicationDescription | read-only | current | Textual description of this application, assigned by the managed entity. |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1.1.3 | ColumnsnmpSyslogApplicationMnemonic | read-only | current | An abbreviation of the textual description for this application, assigned by the managed entity. i.e. 'STP' for 'Spanning Tree Protocol', etc. This provides a … |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.3.1.1.4 | ColumnsnmpSyslogApplicationSeverity | read-write | current | The maximum severity level of the messages from this application that SHOULD be forwarded to the syslog device software for processing. The higher the severity… |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4 | NodesnmpSyslogDeviceConformance | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.1 | NodesnmpSyslogDeviceGroups | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.1.1 | GroupsnmpSyslogDeviceGroup | current | A collection of objects providing syslog message statistics. | |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.1.2 | GroupsnmpSyslogCollectorGroup | current | A collection of objects providing descriptions of syslog collectors for sending system messages to. | |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.1.3 | GroupsnmpSyslogApplicationGroup | current | A collection of objects providing a mechanism to control the severity level of the messages individual application may generate. | |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.1.4 | GroupsnmpSyslogCollectorDefaultsGroup | current | A collection of objects providing default values for the syslog collectors that can optionally be overridden on a per collector basis with snmpSyslogCollectorF… | |
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.2 | NodesnmpSyslogDeviceCompliances | |||
| 1.3.6.1.4.1.171.10.94.89.89.82.1.4.2.1 | CompliancesnmpSyslogDeviceCompliance | read-only | current | The compliance statement for devices that support sending system messages to a syslog collector. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SyslogFacility | INTEGER { local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23), no-map(24) } | current | This textual convention maps out to the facilities available for syslog messages. The value no-map(24) indicates that the appropriate facility will be provided by the individual applications on the managed entity. If th… |
| SyslogSeverity | INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } | current | This textual convention maps out to the severity levels of syslog messages. The syslog protocol uses the values 0 (emergency), to 7 (debug). |
| SyslogUdpPort | Unsigned32 | current | The UDP port number the syslog device is using to send requests to this syslog collector. 514 is the IANA assigned port number for syslog. |